* [PATCH] r6040: fix link checking with switches
@ 2010-05-16 12:30 Florian Fainelli
2010-05-18 5:48 ` David Miller
0 siblings, 1 reply; 2+ messages in thread
From: Florian Fainelli @ 2010-05-16 12:30 UTC (permalink / raw)
To: netdev, David Miller
The current link checking logic only works for one port, which is not correct
for swiches were multiple ports can have different link status. As a result
we would only check for link status on port 1 of the switch. Move the calls
to mii_check_media in r6040_timer which will be polling a single PHY chip
correctly and assume link is up for switches.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
drivers/net/r6040.c | 8 +++-----
1 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 4122916..eeee379 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -400,9 +400,6 @@ static void r6040_init_mac_regs(struct net_device *dev)
* we may got called by r6040_tx_timeout which has left
* some unsent tx buffers */
iowrite16(0x01, ioaddr + MTPR);
-
- /* Check media */
- mii_check_media(&lp->mii_if, 1, 1);
}
static void r6040_tx_timeout(struct net_device *dev)
@@ -530,8 +527,6 @@ static int r6040_phy_mode_chk(struct net_device *dev)
phy_dat = 0x0000;
}
- mii_check_media(&lp->mii_if, 0, 1);
-
return phy_dat;
};
@@ -813,6 +808,9 @@ static void r6040_timer(unsigned long data)
/* Timer active again */
mod_timer(&lp->timer, round_jiffies(jiffies + HZ));
+
+ /* Check media */
+ mii_check_media(&lp->mii_if, 1, 1);
}
/* Read/set MAC address routines */
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] r6040: fix link checking with switches
2010-05-16 12:30 [PATCH] r6040: fix link checking with switches Florian Fainelli
@ 2010-05-18 5:48 ` David Miller
0 siblings, 0 replies; 2+ messages in thread
From: David Miller @ 2010-05-18 5:48 UTC (permalink / raw)
To: florian; +Cc: netdev
From: Florian Fainelli <florian@openwrt.org>
Date: Sun, 16 May 2010 14:30:56 +0200
> The current link checking logic only works for one port, which is not correct
> for swiches were multiple ports can have different link status. As a result
> we would only check for link status on port 1 of the switch. Move the calls
> to mii_check_media in r6040_timer which will be polling a single PHY chip
> correctly and assume link is up for switches.
>
> Signed-off-by: Florian Fainelli <florian@openwrt.org>
Applied.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-05-18 5:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-05-16 12:30 [PATCH] r6040: fix link checking with switches Florian Fainelli
2010-05-18 5:48 ` David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).