* [PATCH net-next 1/5] cirrus: cs89x0: Code style neatening
2012-05-18 22:56 [PATCH net-next 0/5] cirrus: cs89x0: Neatening Joe Perches
@ 2012-05-18 22:56 ` Joe Perches
2012-05-18 22:56 ` [PATCH net-next 2/5] cirrus: cs89x0: Convert printks to pr_<level> Joe Perches
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Joe Perches @ 2012-05-18 22:56 UTC (permalink / raw)
To: netdev, linux-kernel; +Cc: Jaccon Bastiaansen
Neaten the comments and reflow the code without
changing anything other than whitespace.
git diff -w shows just comment neatening and a few
line removals.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/ethernet/cirrus/cs89x0.c | 734 +++++++++++++++-------------------
1 files changed, 323 insertions(+), 411 deletions(-)
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index 1d59030..41c8ac9 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -1,105 +1,27 @@
/* cs89x0.c: A Crystal Semiconductor (Now Cirrus Logic) CS89[02]0
- * driver for linux.
+ * driver for linux.
+ * Written 1996 by Russell Nelson, with reference to skeleton.c
+ * written 1993-1994 by Donald Becker.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ * The author may be reached at nelson@crynwr.com, Crynwr
+ * Software, 521 Pleasant Valley Rd., Potsdam, NY 13676
+ *
+ * Other contributors:
+ * Mike Cruse : mcruse@cti-ltd.com
+ * Russ Nelson
+ * Melody Lee : ethernet@crystal.cirrus.com
+ * Alan Cox
+ * Andrew Morton
+ * Oskar Schirmer : oskar@scara.com
+ * Deepak Saxena : dsaxena@plexity.net
+ * Dmitry Pervushin : dpervushin@ru.mvista.com
+ * Deepak Saxena : dsaxena@plexity.net
+ * Domenico Andreoli : cavokz@gmail.com
*/
-/*
- Written 1996 by Russell Nelson, with reference to skeleton.c
- written 1993-1994 by Donald Becker.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- The author may be reached at nelson@crynwr.com, Crynwr
- Software, 521 Pleasant Valley Rd., Potsdam, NY 13676
-
- Changelog:
-
- Mike Cruse : mcruse@cti-ltd.com
- : Changes for Linux 2.0 compatibility.
- : Added dev_id parameter in net_interrupt(),
- : request_irq() and free_irq(). Just NULL for now.
-
- Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
- : in net_open() and net_close() so kerneld would know
- : that the module is in use and wouldn't eject the
- : driver prematurely.
-
- Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
- : as an example. Disabled autoprobing in init_module(),
- : not a good thing to do to other devices while Linux
- : is running from all accounts.
-
- Russ Nelson : Jul 13 1998. Added RxOnly DMA support.
-
- Melody Lee : Aug 10 1999. Changes for Linux 2.2.5 compatibility.
- : email: ethernet@crystal.cirrus.com
-
- Alan Cox : Removed 1.2 support, added 2.1 extra counters.
-
- Andrew Morton : Kernel 2.3.48
- : Handle kmalloc() failures
- : Other resource allocation fixes
- : Add SMP locks
- : Integrate Russ Nelson's ALLOW_DMA functionality back in.
- : If ALLOW_DMA is true, make DMA runtime selectable
- : Folded in changes from Cirrus (Melody Lee
- : <klee@crystal.cirrus.com>)
- : Don't call netif_wake_queue() in net_send_packet()
- : Fixed an out-of-mem bug in dma_rx()
- : Updated Documentation/networking/cs89x0.txt
-
- Andrew Morton : Kernel 2.3.99-pre1
- : Use skb_reserve to longword align IP header (two places)
- : Remove a delay loop from dma_rx()
- : Replace '100' with HZ
- : Clean up a couple of skb API abuses
- : Added 'cs89x0_dma=N' kernel boot option
- : Correctly initialise lp->lock in non-module compile
-
- Andrew Morton : Kernel 2.3.99-pre4-1
- : MOD_INC/DEC race fix (see
- : http://www.uwsg.indiana.edu/hypermail/linux/kernel/0003.3/1532.html)
-
- Andrew Morton : Kernel 2.4.0-test7-pre2
- : Enhanced EEPROM support to cover more devices,
- : abstracted IRQ mapping to support CONFIG_ARCH_CLPS7500 arch
- : (Jason Gunthorpe <jgg@ualberta.ca>)
-
- Andrew Morton : Kernel 2.4.0-test11-pre4
- : Use dev->name in request_*() (Andrey Panin)
- : Fix an error-path memleak in init_module()
- : Preserve return value from request_irq()
- : Fix type of `media' module parm (Keith Owens)
- : Use SET_MODULE_OWNER()
- : Tidied up strange request_irq() abuse in net_open().
-
- Andrew Morton : Kernel 2.4.3-pre1
- : Request correct number of pages for DMA (Hugh Dickens)
- : Select PP_ChipID _after_ unregister_netdev in cleanup_module()
- : because unregister_netdev() calls get_stats.
- : Make `version[]' __initdata
- : Uninlined the read/write reg/word functions.
-
- Oskar Schirmer : oskar@scara.com
- : HiCO.SH4 (superh) support added (irq#1, cs89x0_media=)
-
- Deepak Saxena : dsaxena@plexity.net
- : Intel IXDP2x01 (XScale ixp2x00 NPU) platform support
-
- Dmitry Pervushin : dpervushin@ru.mvista.com
- : PNX010X platform support
-
- Deepak Saxena : dsaxena@plexity.net
- : Intel IXDP2351 platform support
-
- Dmitry Pervushin : dpervushin@ru.mvista.com
- : PNX010X platform support
-
- Domenico Andreoli : cavokz@gmail.com
- : QQ2440 platform support
-
-*/
-
/*
* Set this to zero to disable DMA code
@@ -119,14 +41,10 @@
*/
#define DEBUGGING 1
-/*
- Sources:
-
- Crynwr packet driver epktisa.
-
- Crystal Semiconductor data sheets.
-
-*/
+/* Sources:
+ * Crynwr packet driver epktisa.
+ * Crystal Semiconductor data sheets.
+ */
#include <linux/module.h>
#include <linux/printk.h>
@@ -158,21 +76,23 @@
#include "cs89x0.h"
static char version[] __initdata =
-"cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton\n";
+ "cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton\n";
#define DRV_NAME "cs89x0"
/* First, a few definitions that the brave might change.
- A zero-terminated list of I/O addresses to be probed. Some special flags..
- Addr & 1 = Read back the address port, look for signature and reset
- the page window before probing
- Addr & 3 = Reset the page window and probe
- The CLPS eval board has the Cirrus chip at 0x80090300, in ARM IO space,
- but it is possible that a Cirrus board could be plugged into the ISA
- slots. */
+ * A zero-terminated list of I/O addresses to be probed. Some special flags..
+ * Addr & 1 = Read back the address port, look for signature and reset
+ * the page window before probing
+ * Addr & 3 = Reset the page window and probe
+ * The CLPS eval board has the Cirrus chip at 0x80090300, in ARM IO space,
+ * but it is possible that a Cirrus board could be plugged into the ISA
+ * slots.
+ */
/* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps
- them to system IRQ numbers. This mapping is card specific and is set to
- the configuration of the Cirrus Eval board for this chip. */
+ * them to system IRQ numbers. This mapping is card specific and is set to
+ * the configuration of the Cirrus Eval board for this chip.
+ */
#if defined(CONFIG_MACH_IXDP2351)
#define CS89x0_NONISA_IRQ
static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
@@ -184,8 +104,8 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
#else
#ifndef CONFIG_CS89x0_PLATFORM
static unsigned int netcard_portlist[] __used __initdata =
- { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
-static unsigned int cs8900_irq_map[] = {10,11,12,5};
+{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
+static unsigned int cs8900_irq_map[] = {10, 11, 12, 5};
#endif
#endif
@@ -268,7 +188,7 @@ static int g_cs89x0_dma;
static int __init dma_fn(char *str)
{
- g_cs89x0_dma = simple_strtol(str,NULL,0);
+ g_cs89x0_dma = simple_strtol(str, NULL, 0);
return 1;
}
@@ -362,10 +282,11 @@ static int __init
wait_eeprom_ready(struct net_device *dev)
{
int timeout = jiffies;
- /* check to see if the EEPROM is ready, a timeout is used -
- just in case EEPROM is ready when SI_BUSY in the
- PP_SelfST is clear */
- while(readreg(dev, PP_SelfST) & SI_BUSY)
+ /* check to see if the EEPROM is ready,
+ * a timeout is used just in case EEPROM is ready when
+ * SI_BUSY in the PP_SelfST is clear
+ */
+ while (readreg(dev, PP_SelfST) & SI_BUSY)
if (jiffies - timeout >= 40)
return -1;
return 0;
@@ -376,7 +297,7 @@ get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
{
int i;
- if (net_debug > 3) printk("EEPROM data from %x for %x:\n",off,len);
+ if (net_debug > 3) printk("EEPROM data from %x for %x:\n", off, len);
for (i = 0; i < len; i++) {
if (wait_eeprom_ready(dev) < 0) return -1;
/* Now send the EEPROM read command and EEPROM location to read */
@@ -386,7 +307,7 @@ get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
if (net_debug > 3) printk("%04x ", buffer[i]);
}
if (net_debug > 3) printk("\n");
- return 0;
+ return 0;
}
static int __init
@@ -420,10 +341,10 @@ static const struct net_device_ops net_ops = {
.ndo_open = net_open,
.ndo_stop = net_close,
.ndo_tx_timeout = net_timeout,
- .ndo_start_xmit = net_send_packet,
+ .ndo_start_xmit = net_send_packet,
.ndo_get_stats = net_get_stats,
.ndo_set_rx_mode = set_multicast_list,
- .ndo_set_mac_address = set_mac_address,
+ .ndo_set_mac_address = set_mac_address,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = net_poll_controller,
#endif
@@ -431,12 +352,12 @@ static const struct net_device_ops net_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/* This is the real probe routine. Linux has a history of friendly device
- probes on the ISA bus. A good device probes avoids doing writes, and
- verifies that the correct device exists and functions.
- Return 0 on success.
+/* This is the real probe routine.
+ * Linux has a history of friendly device probes on the ISA bus.
+ * A good device probes avoids doing writes, and
+ * verifies that the correct device exists and functions.
+ * Return 0 on success.
*/
-
static int __init
cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
{
@@ -462,7 +383,7 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
#endif
lp->force = g_cs89x0_media__force;
#endif
- }
+ }
printk(KERN_DEBUG "PP_addr at %p[%x]: 0x%x\n",
ioaddr, ADD_PORT, ioread16(ioaddr + ADD_PORT));
@@ -471,9 +392,9 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
tmp = ioread16(ioaddr + DATA_PORT);
if (tmp != CHIP_EISA_ID_SIG) {
printk(KERN_DEBUG "%s: incorrect signature at %p[%x]: 0x%x!="
- CHIP_EISA_ID_SIG_STR "\n",
- dev->name, ioaddr, DATA_PORT, tmp);
- retval = -ENODEV;
+ CHIP_EISA_ID_SIG_STR "\n",
+ dev->name, ioaddr, DATA_PORT, tmp);
+ retval = -ENODEV;
goto out1;
}
@@ -481,11 +402,11 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
/* get the chip type */
rev_type = readreg(dev, PRODUCT_ID_ADD);
- lp->chip_type = rev_type &~ REVISON_BITS;
+ lp->chip_type = rev_type & ~REVISON_BITS;
lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
/* Check the chip type and revision in order to set the correct send command
- CS8920 revision C and CS8900 revision F can use the faster send. */
+ CS8920 revision C and CS8900 revision F can use the faster send. */
lp->send_cmd = TX_AFTER_381;
if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
lp->send_cmd = TX_NOW;
@@ -497,45 +418,46 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
printk(KERN_INFO "%s: cs89%c0%s rev %c found at %p ",
dev->name,
- lp->chip_type==CS8900?'0':'2',
- lp->chip_type==CS8920M?"M":"",
+ lp->chip_type == CS8900 ? '0' : '2',
+ lp->chip_type == CS8920M ? "M" : "",
lp->chip_revision,
lp->virt_addr);
reset_chip(dev);
- /* Here we read the current configuration of the chip. If there
- is no Extended EEPROM then the idea is to not disturb the chip
- configuration, it should have been correctly setup by automatic
- EEPROM read on reset. So, if the chip says it read the EEPROM
- the driver will always do *something* instead of complain that
- adapter_cnf is 0. */
-
-
- if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
- (EEPROM_OK|EEPROM_PRESENT)) {
- /* Load the MAC. */
- for (i=0; i < ETH_ALEN/2; i++) {
- unsigned int Addr;
- Addr = readreg(dev, PP_IA+i*2);
- dev->dev_addr[i*2] = Addr & 0xFF;
- dev->dev_addr[i*2+1] = Addr >> 8;
+ /* Here we read the current configuration of the chip.
+ * If there is no Extended EEPROM then the idea is to not disturb
+ * the chip configuration, it should have been correctly setup by
+ * automatic EEPROM read on reset. So, if the chip says it read
+ * the EEPROM the driver will always do *something* instead of
+ * complain that adapter_cnf is 0.
+ */
+
+ if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
+ (EEPROM_OK|EEPROM_PRESENT)) {
+ /* Load the MAC. */
+ for (i = 0; i < ETH_ALEN / 2; i++) {
+ unsigned int Addr;
+ Addr = readreg(dev, PP_IA + i * 2);
+ dev->dev_addr[i * 2] = Addr & 0xFF;
+ dev->dev_addr[i * 2 + 1] = Addr >> 8;
}
- /* Load the Adapter Configuration.
- Note: Barring any more specific information from some
- other source (ie EEPROM+Schematics), we would not know
- how to operate a 10Base2 interface on the AUI port.
- However, since we do read the status of HCB1 and use
- settings that always result in calls to control_dc_dc(dev,0)
- a BNC interface should work if the enable pin
- (dc/dc converter) is on HCB1. It will be called AUI
- however. */
+ /* Load the Adapter Configuration.
+ * Note: Barring any more specific information from some
+ * other source (ie EEPROM+Schematics), we would not know
+ * how to operate a 10Base2 interface on the AUI port.
+ * However, since we do read the status of HCB1 and use
+ * settings that always result in calls to control_dc_dc(dev,0)
+ * a BNC interface should work if the enable pin
+ * (dc/dc converter) is on HCB1.
+ * It will be called AUI however.
+ */
lp->adapter_cnf = 0;
i = readreg(dev, PP_LineCTL);
/* Preserve the setting of the HCB1 pin. */
- if ((i & (HCB1 | HCB1_ENBL)) == (HCB1 | HCB1_ENBL))
+ if ((i & (HCB1 | HCB1_ENBL)) == (HCB1 | HCB1_ENBL))
lp->adapter_cnf |= A_CNF_DC_DC_POLARITY;
/* Save the sqelch bit */
if ((i & LOW_RX_SQUELCH) == LOW_RX_SQUELCH)
@@ -549,92 +471,94 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
/* Check if the card is in Auto mode. */
if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUTO_AUI_10BASET)
lp->adapter_cnf |= A_CNF_AUI | A_CNF_10B_T |
- A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;
+ A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;
if (net_debug > 1)
printk(KERN_INFO "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
- dev->name, i, lp->adapter_cnf);
+ dev->name, i, lp->adapter_cnf);
/* IRQ. Other chips already probe, see below. */
if (lp->chip_type == CS8900)
lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK;
- printk( "[Cirrus EEPROM] ");
+ printk("[Cirrus EEPROM] ");
}
- printk("\n");
+ printk("\n");
/* First check to see if an EEPROM is attached. */
if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
- else if (get_eeprom_data(dev, START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
+ else if (get_eeprom_data(dev, START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) {
printk(KERN_WARNING "\ncs89x0: EEPROM read failed, relying on command line.\n");
- } else if (get_eeprom_cksum(START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
+ } else if (get_eeprom_cksum(START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) {
/* Check if the chip was able to read its own configuration starting
at 0 in the EEPROM*/
if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) !=
- (EEPROM_OK|EEPROM_PRESENT))
- printk(KERN_WARNING "cs89x0: Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
+ (EEPROM_OK | EEPROM_PRESENT))
+ printk(KERN_WARNING "cs89x0: Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
- } else {
+ } else {
/* This reads an extended EEPROM that is not documented
- in the CS8900 datasheet. */
-
- /* get transmission control word but keep the autonegotiation bits */
- if (!lp->auto_neg_cnf) lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
- /* Store adapter configuration */
- if (!lp->adapter_cnf) lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2];
- /* Store ISA configuration */
- lp->isa_config = eeprom_buff[ISA_CNF_OFFSET/2];
- dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8;
-
- /* eeprom_buff has 32-bit ints, so we can't just memcpy it */
- /* store the initial memory base address */
- for (i = 0; i < ETH_ALEN/2; i++) {
- dev->dev_addr[i*2] = eeprom_buff[i];
- dev->dev_addr[i*2+1] = eeprom_buff[i] >> 8;
- }
+ * in the CS8900 datasheet.
+ */
+
+ /* get transmission control word but keep the autonegotiation bits */
+ if (!lp->auto_neg_cnf) lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
+ /* Store adapter configuration */
+ if (!lp->adapter_cnf) lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2];
+ /* Store ISA configuration */
+ lp->isa_config = eeprom_buff[ISA_CNF_OFFSET/2];
+ dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8;
+
+ /* eeprom_buff has 32-bit ints, so we can't just memcpy it */
+ /* store the initial memory base address */
+ for (i = 0; i < ETH_ALEN / 2; i++) {
+ dev->dev_addr[i * 2] = eeprom_buff[i];
+ dev->dev_addr[i * 2 + 1] = eeprom_buff[i] >> 8;
+ }
if (net_debug > 1)
printk(KERN_DEBUG "%s: new adapter_cnf: 0x%x\n",
- dev->name, lp->adapter_cnf);
- }
+ dev->name, lp->adapter_cnf);
+ }
- /* allow them to force multiple transceivers. If they force multiple, autosense */
- {
+ /* allow them to force multiple transceivers. If they force multiple, autosense */
+ {
int count = 0;
if (lp->force & FORCE_RJ45) {lp->adapter_cnf |= A_CNF_10B_T; count++; }
- if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_AUI; count++; }
+ if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_AUI; count++; }
if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_10B_2; count++; }
if (count > 1) {lp->adapter_cnf |= A_CNF_MEDIA_AUTO; }
else if (lp->force & FORCE_RJ45){lp->adapter_cnf |= A_CNF_MEDIA_10B_T; }
else if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_MEDIA_AUI; }
else if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_MEDIA_10B_2; }
- }
+ }
if (net_debug > 1)
printk(KERN_DEBUG "%s: after force 0x%x, adapter_cnf=0x%x\n",
- dev->name, lp->force, lp->adapter_cnf);
+ dev->name, lp->force, lp->adapter_cnf);
- /* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
+ /* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
- /* FIXME: We don't let you set the IMM bit from the command line: add it to lp->auto_neg_cnf here */
+ /* FIXME: We don't let you set the IMM bit from the command line: add it to lp->auto_neg_cnf here */
- /* FIXME: we don't set the Ethernet address on the command line. Use
- ifconfig IFACE hw ether AABBCCDDEEFF */
+ /* FIXME: we don't set the Ethernet address on the command line. Use
+ * ifconfig IFACE hw ether AABBCCDDEEFF
+ */
printk(KERN_INFO "cs89x0 media %s%s%s",
- (lp->adapter_cnf & A_CNF_10B_T)?"RJ-45,":"",
- (lp->adapter_cnf & A_CNF_AUI)?"AUI,":"",
- (lp->adapter_cnf & A_CNF_10B_2)?"BNC,":"");
+ (lp->adapter_cnf & A_CNF_10B_T) ? "RJ-45," : "",
+ (lp->adapter_cnf & A_CNF_AUI) ? "AUI," : "",
+ (lp->adapter_cnf & A_CNF_10B_2) ? "BNC," : "");
lp->irq_map = 0xffff;
/* If this is a CS8900 then no pnp soft */
if (lp->chip_type != CS8900 &&
/* Check if the ISA IRQ has been set */
- (i = readreg(dev, PP_CS8920_ISAINT) & 0xff,
- (i != 0 && i < CS8920_NO_INTS))) {
+ (i = readreg(dev, PP_CS8920_ISAINT) & 0xff,
+ (i != 0 && i < CS8920_NO_INTS))) {
if (!dev->irq)
dev->irq = i;
} else {
@@ -642,7 +566,7 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
#ifndef CONFIG_CS89x0_PLATFORM
if (lp->chip_type == CS8900) {
#ifdef CS89x0_NONISA_IRQ
- i = cs8900_irq_map[0];
+ i = cs8900_irq_map[0];
#else
/* Translate the IRQ using the IRQ mapping table. */
if (i >= ARRAY_SIZE(cs8900_irq_map))
@@ -655,10 +579,10 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
int irq_map_buff[IRQ_MAP_LEN/2];
if (get_eeprom_data(dev, IRQ_MAP_EEPROM_DATA,
- IRQ_MAP_LEN/2,
+ IRQ_MAP_LEN / 2,
irq_map_buff) >= 0) {
if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT)
- lp->irq_map = (irq_map_buff[0]>>8) | (irq_map_buff[1] << 8);
+ lp->irq_map = (irq_map_buff[0] >> 8) | (irq_map_buff[1] << 8);
}
#endif
}
@@ -730,9 +654,10 @@ cs89x0_ioport_probe(struct net_device *dev, unsigned long ioport, int modular)
}
/* if they give us an odd I/O address, then do ONE write to
- the address port, to get it back to address zero, where we
- expect to find the EISA signature word. An IO with a base of 0x3
- will skip the test for the ADD_PORT. */
+ * the address port, to get it back to address zero, where we
+ * expect to find the EISA signature word. An IO with a base of 0x3
+ * will skip the test for the ADD_PORT.
+ */
if (ioport & 1) {
if (net_debug > 1)
printk(KERN_INFO "%s: odd ioaddr 0x%lx\n",
@@ -742,8 +667,8 @@ cs89x0_ioport_probe(struct net_device *dev, unsigned long ioport, int modular)
if ((ioread16(io_mem + ADD_PORT) & ADD_MASK) !=
ADD_SIG) {
printk(KERN_ERR "%s: bad signature 0x%x\n",
- dev->name,
- ioread16(io_mem + ADD_PORT));
+ dev->name,
+ ioread16(io_mem + ADD_PORT));
ret = -ENODEV;
goto unmap;
}
@@ -762,12 +687,12 @@ out:
#ifndef MODULE
/* Check for a network adaptor of this type, and return '0' iff one exists.
- If dev->base_addr == 0, probe all likely locations.
- If dev->base_addr == 1, always return failure.
- If dev->base_addr == 2, allocate space for the device and return success
- (detachable devices only).
- Return 0 on success.
- */
+ * If dev->base_addr == 0, probe all likely locations.
+ * If dev->base_addr == 1, always return failure.
+ * If dev->base_addr == 2, allocate space for the device and return success
+ * (detachable devices only).
+ * Return 0 on success.
+ */
struct net_device * __init cs89x0_probe(int unit)
{
@@ -814,7 +739,7 @@ out:
/*********************************
* This page contains DMA routines
-**********************************/
+ *********************************/
#if ALLOW_DMA
@@ -882,7 +807,7 @@ dma_bufcfg(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
if (lp->use_dma)
- return (lp->isa_config & ANY_ISA_DMA)? RX_DMA_ENBL : 0;
+ return (lp->isa_config & ANY_ISA_DMA) ? RX_DMA_ENBL : 0;
else
return 0;
}
@@ -916,8 +841,8 @@ dma_rx(struct net_device *dev)
length = bp[2] + (bp[3]<<8);
bp += 4;
if (net_debug > 5) {
- printk( "%s: receiving DMA packet at %lx, status %x, length %x\n",
- dev->name, (unsigned long)bp, status, length);
+ printk("%s: receiving DMA packet at %lx, status %x, length %x\n",
+ dev->name, (unsigned long)bp, status, length);
}
if ((status & RX_OK) == 0) {
count_rx_errors(status, dev);
@@ -942,22 +867,22 @@ skip_this_frame:
if (bp + length > lp->end_dma_buff) {
int semi_cnt = lp->end_dma_buff - bp;
- memcpy(skb_put(skb,semi_cnt), bp, semi_cnt);
- memcpy(skb_put(skb,length - semi_cnt), lp->dma_buff,
+ memcpy(skb_put(skb, semi_cnt), bp, semi_cnt);
+ memcpy(skb_put(skb, length - semi_cnt), lp->dma_buff,
length - semi_cnt);
} else {
- memcpy(skb_put(skb,length), bp, length);
+ memcpy(skb_put(skb, length), bp, length);
}
bp += (length + 3) & ~3;
if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
lp->rx_dma_ptr = bp;
if (net_debug > 3) {
- printk( "%s: received %d byte DMA packet of type %x\n",
- dev->name, length,
- (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
+ printk("%s: received %d byte DMA packet of type %x\n",
+ dev->name, length,
+ (skb->data[ETH_ALEN + ETH_ALEN] << 8) | skb->data[ETH_ALEN + ETH_ALEN + 1]);
}
- skb->protocol=eth_type_trans(skb,dev);
+ skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->stats.rx_packets++;
dev->stats.rx_bytes += length;
@@ -995,7 +920,7 @@ static void __init reset_chip(struct net_device *dev)
/* Wait until the chip is reset */
reset_start_time = jiffies;
- while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
+ while ((readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
;
#endif /* !CONFIG_MACH_MX31ADS */
}
@@ -1038,38 +963,38 @@ detect_tp(struct net_device *dev)
if (net_debug > 1) printk("%s: Attempting TP\n", dev->name);
- /* If connected to another full duplex capable 10-Base-T card the link pulses
- seem to be lost when the auto detect bit in the LineCTL is set.
- To overcome this the auto detect bit will be cleared whilst testing the
- 10-Base-T interface. This would not be necessary for the sparrow chip but
- is simpler to do it anyway. */
- writereg(dev, PP_LineCTL, lp->linectl &~ AUI_ONLY);
+ /* If connected to another full duplex capable 10-Base-T card the link pulses
+ seem to be lost when the auto detect bit in the LineCTL is set.
+ To overcome this the auto detect bit will be cleared whilst testing the
+ 10-Base-T interface. This would not be necessary for the sparrow chip but
+ is simpler to do it anyway. */
+ writereg(dev, PP_LineCTL, lp->linectl & ~AUI_ONLY);
control_dc_dc(dev, 0);
- /* Delay for the hardware to work out if the TP cable is present - 150ms */
+ /* Delay for the hardware to work out if the TP cable is present - 150ms */
for (timenow = jiffies; jiffies - timenow < 15; )
- ;
+ ;
if ((readreg(dev, PP_LineST) & LINK_OK) == 0)
return DETECTED_NONE;
if (lp->chip_type == CS8900) {
- switch (lp->force & 0xf0) {
+ switch (lp->force & 0xf0) {
#if 0
- case FORCE_AUTO:
- printk("%s: cs8900 doesn't autonegotiate\n",dev->name);
- return DETECTED_NONE;
+ case FORCE_AUTO:
+ printk("%s: cs8900 doesn't autonegotiate\n", dev->name);
+ return DETECTED_NONE;
#endif
- /* CS8900 doesn't support AUTO, change to HALF*/
- case FORCE_AUTO:
+ /* CS8900 doesn't support AUTO, change to HALF*/
+ case FORCE_AUTO:
lp->force &= ~FORCE_AUTO;
- lp->force |= FORCE_HALF;
+ lp->force |= FORCE_HALF;
break;
case FORCE_HALF:
break;
- case FORCE_FULL:
+ case FORCE_FULL:
writereg(dev, PP_TestCTL, readreg(dev, PP_TestCTL) | FDX_8900);
break;
- }
+ }
fdx = readreg(dev, PP_TestCTL) & FDX_8900;
} else {
switch (lp->force & 0xf0) {
@@ -1082,12 +1007,12 @@ detect_tp(struct net_device *dev)
case FORCE_FULL:
lp->auto_neg_cnf = RE_NEG_NOW | ALLOW_FDX;
break;
- }
+ }
writereg(dev, PP_AutoNegCTL, lp->auto_neg_cnf & AUTO_NEG_MASK);
if ((lp->auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) {
- printk(KERN_INFO "%s: negotiating duplex...\n",dev->name);
+ printk(KERN_INFO "%s: negotiating duplex...\n", dev->name);
while (readreg(dev, PP_AutoNegST) & AUTO_NEG_BUSY) {
if (jiffies - timenow > 4000) {
printk(KERN_ERR "**** Full / half duplex auto-negotiation timed out ****\n");
@@ -1109,15 +1034,15 @@ send_test_pkt(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0,
- 0, 46, /* A 46 in network order */
- 0, 0, /* DSAP=0 & SSAP=0 fields */
- 0xf3, 0 /* Control (Test Req + P bit set) */ };
+ 0, 46, /* A 46 in network order */
+ 0, 0, /* DSAP=0 & SSAP=0 fields */
+ 0xf3, 0 /* Control (Test Req + P bit set) */ };
long timenow = jiffies;
writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON);
- memcpy(test_packet, dev->dev_addr, ETH_ALEN);
- memcpy(test_packet+ETH_ALEN, dev->dev_addr, ETH_ALEN);
+ memcpy(test_packet, dev->dev_addr, ETH_ALEN);
+ memcpy(test_packet + ETH_ALEN, dev->dev_addr, ETH_ALEN);
iowrite16(TX_AFTER_ALL, lp->virt_addr + TX_CMD_PORT);
iowrite16(ETH_ZLEN, lp->virt_addr + TX_LEN_PORT);
@@ -1135,11 +1060,11 @@ send_test_pkt(struct net_device *dev)
if (net_debug > 1) printk("Sending test packet ");
/* wait a couple of jiffies for packet to be received */
for (timenow = jiffies; jiffies - timenow < 3; )
- ;
- if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
- if (net_debug > 1) printk("succeeded\n");
- return 1;
- }
+ ;
+ if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
+ if (net_debug > 1) printk("succeeded\n");
+ return 1;
+ }
if (net_debug > 1) printk("failed\n");
return 0;
}
@@ -1153,7 +1078,7 @@ detect_aui(struct net_device *dev)
if (net_debug > 1) printk("%s: Attempting AUI\n", dev->name);
control_dc_dc(dev, 0);
- writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY);
+ writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
if (send_test_pkt(dev))
return DETECTED_AUI;
@@ -1169,7 +1094,7 @@ detect_bnc(struct net_device *dev)
if (net_debug > 1) printk("%s: Attempting BNC\n", dev->name);
control_dc_dc(dev, 1);
- writereg(dev, PP_LineCTL, (lp->linectl &~ AUTO_AUI_10BASET) | AUI_ONLY);
+ writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
if (send_test_pkt(dev))
return DETECTED_BNC;
@@ -1208,7 +1133,7 @@ write_irq(struct net_device *dev, int chip_type, int irq)
This routine should set everything up anew at each open, even
registers that "should" only need to be set once at boot, so that
there is non-reboot way to recover if something goes wrong.
- */
+*/
/* AKPM: do we need to do any locking here? */
@@ -1224,7 +1149,7 @@ net_open(struct net_device *dev)
/* Allow interrupts to be generated by the chip */
/* Cirrus' release had this: */
#if 0
- writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ );
+ writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
#endif
/* And 2.3.47 had this: */
writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
@@ -1252,13 +1177,13 @@ net_open(struct net_device *dev)
#if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM)
if (((1 << dev->irq) & lp->irq_map) == 0) {
printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
- dev->name, dev->irq, lp->irq_map);
+ dev->name, dev->irq, lp->irq_map);
ret = -EAGAIN;
goto bad_out;
}
#endif
/* FIXME: Cirrus' release had this: */
- writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ );
+ writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL)|ENABLE_IRQ);
/* And 2.3.47 had this: */
#if 0
writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
@@ -1276,17 +1201,17 @@ net_open(struct net_device *dev)
if (lp->isa_config & ANY_ISA_DMA) {
unsigned long flags;
lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL,
- get_order(lp->dmasize * 1024));
+ get_order(lp->dmasize * 1024));
if (!lp->dma_buff) {
printk(KERN_ERR "%s: cannot get %dK memory for DMA\n", dev->name, lp->dmasize);
goto release_irq;
}
if (net_debug > 1) {
- printk( "%s: dma %lx %lx\n",
- dev->name,
- (unsigned long)lp->dma_buff,
- (unsigned long)isa_virt_to_bus(lp->dma_buff));
+ printk("%s: dma %lx %lx\n",
+ dev->name,
+ (unsigned long)lp->dma_buff,
+ (unsigned long)isa_virt_to_bus(lp->dma_buff));
}
if ((unsigned long) lp->dma_buff >= MAX_DMA_ADDRESS ||
!dma_page_eq(lp->dma_buff, lp->dma_buff+lp->dmasize*1024-1)) {
@@ -1314,64 +1239,64 @@ net_open(struct net_device *dev)
#endif /* ALLOW_DMA */
/* set the Ethernet address */
- for (i=0; i < ETH_ALEN/2; i++)
- writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
+ for (i = 0; i < ETH_ALEN / 2; i++)
+ writereg(dev, PP_IA + i * 2, dev->dev_addr[i * 2] | (dev->dev_addr[i * 2 + 1] << 8));
/* while we're testing the interface, leave interrupts disabled */
writereg(dev, PP_BusCTL, MEMORY_ON);
/* Set the LineCTL quintuplet based on adapter configuration read from EEPROM */
if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) && (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
- lp->linectl = LOW_RX_SQUELCH;
+ lp->linectl = LOW_RX_SQUELCH;
else
- lp->linectl = 0;
+ lp->linectl = 0;
- /* check to make sure that they have the "right" hardware available */
- switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
+ /* check to make sure that they have the "right" hardware available */
+ switch (lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
case A_CNF_MEDIA_10B_T: result = lp->adapter_cnf & A_CNF_10B_T; break;
case A_CNF_MEDIA_AUI: result = lp->adapter_cnf & A_CNF_AUI; break;
case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
- default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
- }
- if (!result) {
- printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
+ default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
+ }
+ if (!result) {
+ printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
release_dma:
#if ALLOW_DMA
free_dma(dev->dma);
release_irq:
release_dma_buff(lp);
#endif
- writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON));
- free_irq(dev->irq, dev);
+ writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON));
+ free_irq(dev->irq, dev);
ret = -EAGAIN;
goto bad_out;
}
- /* set the hardware to the configured choice */
- switch(lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
+ /* set the hardware to the configured choice */
+ switch (lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
case A_CNF_MEDIA_10B_T:
- result = detect_tp(dev);
- if (result==DETECTED_NONE) {
- printk(KERN_WARNING "%s: 10Base-T (RJ-45) has no cable\n", dev->name);
- if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
- result = DETECTED_RJ45H; /* Yes! I don't care if I see a link pulse */
- }
+ result = detect_tp(dev);
+ if (result == DETECTED_NONE) {
+ printk(KERN_WARNING "%s: 10Base-T (RJ-45) has no cable\n", dev->name);
+ if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
+ result = DETECTED_RJ45H; /* Yes! I don't care if I see a link pulse */
+ }
break;
case A_CNF_MEDIA_AUI:
- result = detect_aui(dev);
- if (result==DETECTED_NONE) {
- printk(KERN_WARNING "%s: 10Base-5 (AUI) has no cable\n", dev->name);
- if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
- result = DETECTED_AUI; /* Yes! I don't care if I see a carrrier */
- }
+ result = detect_aui(dev);
+ if (result == DETECTED_NONE) {
+ printk(KERN_WARNING "%s: 10Base-5 (AUI) has no cable\n", dev->name);
+ if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
+ result = DETECTED_AUI; /* Yes! I don't care if I see a carrrier */
+ }
break;
case A_CNF_MEDIA_10B_2:
- result = detect_bnc(dev);
- if (result==DETECTED_NONE) {
- printk(KERN_WARNING "%s: 10Base-2 (BNC) has no cable\n", dev->name);
- if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
- result = DETECTED_BNC; /* Yes! I don't care if I can xmit a packet */
- }
+ result = detect_bnc(dev);
+ if (result == DETECTED_NONE) {
+ printk(KERN_WARNING "%s: 10Base-2 (BNC) has no cable\n", dev->name);
+ if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
+ result = DETECTED_BNC; /* Yes! I don't care if I can xmit a packet */
+ }
break;
case A_CNF_MEDIA_AUTO:
writereg(dev, PP_LineCTL, lp->linectl | AUTO_AUI_10BASET);
@@ -1387,7 +1312,7 @@ release_irq:
printk(KERN_ERR "%s: no media detected\n", dev->name);
goto release_dma;
}
- switch(result) {
+ switch (result) {
case DETECTED_NONE:
printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
goto release_dma;
@@ -1422,22 +1347,22 @@ release_irq:
writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
- TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
+ TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
#if ALLOW_DMA
- dma_bufcfg(dev) |
+ dma_bufcfg(dev) |
#endif
- TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
+ TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
/* now that we've got our act together, enable everything */
writereg(dev, PP_BusCTL, ENABLE_IRQ
- | (dev->mem_start?MEMORY_ON : 0) /* turn memory on */
+ | (dev->mem_start ? MEMORY_ON : 0) /* turn memory on */
#if ALLOW_DMA
| dma_busctl(dev)
#endif
- );
- netif_start_queue(dev);
+ );
+ netif_start_queue(dev);
if (net_debug > 1)
printk("cs89x0: net_open() succeeded\n");
return 0;
@@ -1450,25 +1375,25 @@ static void net_timeout(struct net_device *dev)
/* If we get here, some higher level has decided we are broken.
There should really be a "kick me" function call instead. */
if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name,
- tx_done(dev) ? "IRQ conflict ?" : "network cable problem");
+ tx_done(dev) ? "IRQ conflict ?" : "network cable problem");
/* Try to restart the adaptor. */
netif_wake_queue(dev);
}
-static netdev_tx_t net_send_packet(struct sk_buff *skb,struct net_device *dev)
+static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
unsigned long flags;
if (net_debug > 3) {
printk("%s: sent %d byte packet of type %x\n",
- dev->name, skb->len,
- (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
+ dev->name, skb->len,
+ (skb->data[ETH_ALEN + ETH_ALEN] << 8) | skb->data[ETH_ALEN + ETH_ALEN + 1]);
}
/* keep the upload from being interrupted, since we
- ask the chip to start transmitting before the
- whole packet has been completely uploaded. */
+ ask the chip to start transmitting before the
+ whole packet has been completely uploaded. */
spin_lock_irqsave(&lp->lock, flags);
netif_stop_queue(dev);
@@ -1479,8 +1404,7 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb,struct net_device *dev)
/* Test to see if the chip has allocated memory for the packet */
if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
- /*
- * Gasp! It hasn't. But that shouldn't happen since
+ /* Gasp! It hasn't. But that shouldn't happen since
* we're waiting for TxOk, so return 1 and requeue this packet.
*/
@@ -1492,10 +1416,9 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb,struct net_device *dev)
writewords(lp, TX_FRAME_PORT, skb->data, (skb->len+1) >> 1);
spin_unlock_irqrestore(&lp->lock, flags);
dev->stats.tx_bytes += skb->len;
- dev_kfree_skb (skb);
+ dev_kfree_skb(skb);
- /*
- * We DO NOT call netif_wake_queue() here.
+ /* We DO NOT call netif_wake_queue() here.
* We also DO NOT call netif_start_queue().
*
* Either of these would cause another bottom half run through
@@ -1509,28 +1432,30 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb,struct net_device *dev)
}
/* The typical workload of the driver:
- Handle the network interface interrupts. */
+ * Handle the network interface interrupts.
+ */
static irqreturn_t net_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct net_local *lp;
int status;
- int handled = 0;
+ int handled = 0;
lp = netdev_priv(dev);
/* we MUST read all the events out of the ISQ, otherwise we'll never
- get interrupted again. As a consequence, we can't have any limit
- on the number of times we loop in the interrupt handler. The
- hardware guarantees that eventually we'll run out of events. Of
- course, if you're on a slow machine, and packets are arriving
- faster than you can read them off, you're screwed. Hasta la
- vista, baby! */
+ * get interrupted again. As a consequence, we can't have any limit
+ * on the number of times we loop in the interrupt handler. The
+ * hardware guarantees that eventually we'll run out of events. Of
+ * course, if you're on a slow machine, and packets are arriving
+ * faster than you can read them off, you're screwed. Hasta la
+ * vista, baby!
+ */
while ((status = ioread16(lp->virt_addr + ISQ_PORT))) {
if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
handled = 1;
- switch(status & ISQ_EVENT_MASK) {
+ switch (status & ISQ_EVENT_MASK) {
case ISQ_RECEIVER_EVENT:
/* Got a packet(s). */
net_rx(dev);
@@ -1538,11 +1463,11 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
case ISQ_TRANSMITTER_EVENT:
dev->stats.tx_packets++;
netif_wake_queue(dev); /* Inform upper layers. */
- if ((status & ( TX_OK |
- TX_LOST_CRS |
- TX_SQE_ERROR |
- TX_LATE_COL |
- TX_16_COL)) != TX_OK) {
+ if ((status & (TX_OK |
+ TX_LOST_CRS |
+ TX_SQE_ERROR |
+ TX_LATE_COL |
+ TX_16_COL)) != TX_OK) {
if ((status & TX_OK) == 0)
dev->stats.tx_errors++;
if (status & TX_LOST_CRS)
@@ -1558,31 +1483,33 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
case ISQ_BUFFER_EVENT:
if (status & READY_FOR_TX) {
/* we tried to transmit a packet earlier,
- but inexplicably ran out of buffers.
- That shouldn't happen since we only ever
- load one packet. Shrug. Do the right
- thing anyway. */
+ * but inexplicably ran out of buffers.
+ * That shouldn't happen since we only ever
+ * load one packet. Shrug. Do the right
+ * thing anyway.
+ */
netif_wake_queue(dev); /* Inform upper layers. */
}
if (status & TX_UNDERRUN) {
if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
- lp->send_underrun++;
- if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
- else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
+ lp->send_underrun++;
+ if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
+ else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
/* transmit cycle is done, although
- frame wasn't transmitted - this
- avoids having to wait for the upper
- layers to timeout on us, in the
- event of a tx underrun */
+ * frame wasn't transmitted - this
+ * avoids having to wait for the upper
+ * layers to timeout on us, in the
+ * event of a tx underrun
+ */
netif_wake_queue(dev); /* Inform upper layers. */
- }
+ }
#if ALLOW_DMA
if (lp->use_dma && (status & RX_DMA)) {
int count = readreg(dev, PP_DmaFrameCnt);
- while(count) {
+ while (count) {
if (net_debug > 5)
printk("%s: receiving %d DMA frames\n", dev->name, count);
- if (net_debug > 2 && count >1)
+ if (net_debug > 2 && count > 1)
printk("%s: receiving %d DMA frames\n", dev->name, count);
dma_rx(dev);
if (--count == 0)
@@ -1651,12 +1578,12 @@ net_rx(struct net_device *dev)
skb->data[length-1] = ioread16(lp->virt_addr + RX_FRAME_PORT);
if (net_debug > 3) {
- printk( "%s: received %d byte packet of type %x\n",
- dev->name, length,
- (skb->data[ETH_ALEN+ETH_ALEN] << 8) | skb->data[ETH_ALEN+ETH_ALEN+1]);
+ printk("%s: received %d byte packet of type %x\n",
+ dev->name, length,
+ (skb->data[ETH_ALEN + ETH_ALEN] << 8) | skb->data[ETH_ALEN + ETH_ALEN + 1]);
}
- skb->protocol=eth_type_trans(skb,dev);
+ skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->stats.rx_packets++;
dev->stats.rx_bytes += length;
@@ -1700,8 +1627,9 @@ net_close(struct net_device *dev)
return 0;
}
-/* Get the current statistics. This may be called with the card open or
- closed. */
+/* Get the current statistics.
+ * This may be called with the card open or closed.
+ */
static struct net_device_stats *
net_get_stats(struct net_device *dev)
{
@@ -1723,7 +1651,7 @@ static void set_multicast_list(struct net_device *dev)
unsigned long flags;
spin_lock_irqsave(&lp->lock, flags);
- if(dev->flags&IFF_PROMISC)
+ if (dev->flags&IFF_PROMISC)
{
lp->rx_mode = RX_ALL_ACCEPT;
}
@@ -1740,7 +1668,7 @@ static void set_multicast_list(struct net_device *dev)
/* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
- (lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
+ (lp->rx_mode == RX_ALL_ACCEPT ? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
spin_unlock_irqrestore(&lp->lock, flags);
}
@@ -1760,8 +1688,8 @@ static int set_mac_address(struct net_device *dev, void *p)
dev->name, dev->dev_addr);
/* set the Ethernet address */
- for (i=0; i < ETH_ALEN/2; i++)
- writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
+ for (i = 0; i < ETH_ALEN / 2; i++)
+ writereg(dev, PP_IA + i * 2, dev->dev_addr[i * 2] | (dev->dev_addr[i * 2 + 1] << 8));
return 0;
}
@@ -1770,8 +1698,7 @@ static int set_mac_address(struct net_device *dev, void *p)
static struct net_device *dev_cs89x0;
-/*
- * Support the 'debug' module parm even if we're compiled for non-debug to
+/* Support the 'debug' module parm even if we're compiled for non-debug to
* avoid breaking someone's startup scripts
*/
@@ -1779,11 +1706,11 @@ static int io;
static int irq;
static int debug;
static char media[8];
-static int duplex=-1;
+static int duplex = -1;
static int use_dma; /* These generate unused var warnings if ALLOW_DMA = 0 */
static int dma;
-static int dmasize=16; /* or 64 */
+static int dmasize = 16; /* or 64 */
module_param(io, int, 0);
module_param(irq, int, 0);
@@ -1816,32 +1743,28 @@ MODULE_PARM_DESC(use_dma , "(ignored)");
MODULE_AUTHOR("Mike Cruse, Russwll Nelson <nelson@crynwr.com>, Andrew Morton");
MODULE_LICENSE("GPL");
-
/*
-* media=t - specify media type
- or media=2
- or media=aui
- or medai=auto
-* duplex=0 - specify forced half/full/autonegotiate duplex
-* debug=# - debug level
-
-
-* Default Chip Configuration:
- * DMA Burst = enabled
- * IOCHRDY Enabled = enabled
- * UseSA = enabled
- * CS8900 defaults to half-duplex if not specified on command-line
- * CS8920 defaults to autoneg if not specified on command-line
- * Use reset defaults for other config parameters
-
-* Assumptions:
- * media type specified is supported (circuitry is present)
- * if memory address is > 1MB, then required mem decode hw is present
- * if 10B-2, then agent other than driver will enable DC/DC converter
- (hw or software util)
-
-
-*/
+ * media=t - specify media type
+ * or media=2
+ * or media=aui
+ * or medai=auto
+ * duplex=0 - specify forced half/full/autonegotiate duplex
+ * debug=# - debug level
+ *
+ * Default Chip Configuration:
+ * DMA Burst = enabled
+ * IOCHRDY Enabled = enabled
+ * UseSA = enabled
+ * CS8900 defaults to half-duplex if not specified on command-line
+ * CS8920 defaults to autoneg if not specified on command-line
+ * Use reset defaults for other config parameters
+ *
+ * Assumptions:
+ * media type specified is supported (circuitry is present)
+ * if memory address is > 1MB, then required mem decode hw is present
+ * if 10B-2, then agent other than driver will enable DC/DC converter
+ * (hw or software util)
+ */
int __init init_module(void)
{
@@ -1871,8 +1794,8 @@ int __init init_module(void)
spin_lock_init(&lp->lock);
- /* boy, they'd better get these right */
- if (!strcmp(media, "rj45"))
+ /* boy, they'd better get these right */
+ if (!strcmp(media, "rj45"))
lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T;
else if (!strcmp(media, "aui"))
lp->adapter_cnf = A_CNF_MEDIA_AUI | A_CNF_AUI;
@@ -1881,15 +1804,15 @@ int __init init_module(void)
else
lp->adapter_cnf = A_CNF_MEDIA_10B_T | A_CNF_10B_T;
- if (duplex==-1)
+ if (duplex == -1)
lp->auto_neg_cnf = AUTO_NEG_ENABLE;
- if (io == 0) {
- printk(KERN_ERR "cs89x0.c: Module autoprobing not allowed.\n");
- printk(KERN_ERR "cs89x0.c: Append io=0xNNN\n");
- ret = -EPERM;
+ if (io == 0) {
+ printk(KERN_ERR "cs89x0.c: Module autoprobing not allowed.\n");
+ printk(KERN_ERR "cs89x0.c: Append io=0xNNN\n");
+ ret = -EPERM;
goto out;
- } else if (io <= 0x1ff) {
+ } else if (io <= 0x1ff) {
ret = -ENXIO;
goto out;
}
@@ -1985,8 +1908,7 @@ static int cs89x0_platform_remove(struct platform_device *pdev)
struct net_local *lp = netdev_priv(dev);
struct resource *mem_res;
- /*
- * This platform_get_resource() call will not return NULL, because
+ /* This platform_get_resource() call will not return NULL, because
* the same call in cs89x0_platform_probe() has returned a non NULL
* value.
*/
@@ -2021,13 +1943,3 @@ static void __exit cs89x0_cleanup(void)
module_exit(cs89x0_cleanup);
#endif /* CONFIG_CS89x0_PLATFORM */
-
-/*
- * Local variables:
- * version-control: t
- * kept-new-versions: 5
- * c-indent-level: 8
- * tab-width: 8
- * End:
- *
- */
--
1.7.8.111.gad25c.dirty
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH net-next 2/5] cirrus: cs89x0: Convert printks to pr_<level>
2012-05-18 22:56 [PATCH net-next 0/5] cirrus: cs89x0: Neatening Joe Perches
2012-05-18 22:56 ` [PATCH net-next 1/5] cirrus: cs89x0: Code style neatening Joe Perches
@ 2012-05-18 22:56 ` Joe Perches
2012-05-18 22:56 ` [PATCH net-next 3/5] cirrus: cs89x0: Code neatening Joe Perches
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Joe Perches @ 2012-05-18 22:56 UTC (permalink / raw)
To: netdev, linux-kernel; +Cc: Jaccon Bastiaansen
Use more current logging styles.
Add pr_fmt.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/ethernet/cirrus/cs89x0.c | 116 ++++++++++++++++++----------------
1 files changed, 61 insertions(+), 55 deletions(-)
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index 41c8ac9..b612040 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -46,6 +46,8 @@
* Crystal Semiconductor data sheets.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/printk.h>
#include <linux/errno.h>
@@ -385,15 +387,15 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
#endif
}
- printk(KERN_DEBUG "PP_addr at %p[%x]: 0x%x\n",
- ioaddr, ADD_PORT, ioread16(ioaddr + ADD_PORT));
+ pr_debug("PP_addr at %p[%x]: 0x%x\n",
+ ioaddr, ADD_PORT, ioread16(ioaddr + ADD_PORT));
iowrite16(PP_ChipID, ioaddr + ADD_PORT);
tmp = ioread16(ioaddr + DATA_PORT);
if (tmp != CHIP_EISA_ID_SIG) {
- printk(KERN_DEBUG "%s: incorrect signature at %p[%x]: 0x%x!="
- CHIP_EISA_ID_SIG_STR "\n",
- dev->name, ioaddr, DATA_PORT, tmp);
+ pr_debug("%s: incorrect signature at %p[%x]: 0x%x!="
+ CHIP_EISA_ID_SIG_STR "\n",
+ dev->name, ioaddr, DATA_PORT, tmp);
retval = -ENODEV;
goto out1;
}
@@ -416,12 +418,12 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
if (net_debug && version_printed++ == 0)
printk(version);
- printk(KERN_INFO "%s: cs89%c0%s rev %c found at %p ",
- dev->name,
- lp->chip_type == CS8900 ? '0' : '2',
- lp->chip_type == CS8920M ? "M" : "",
- lp->chip_revision,
- lp->virt_addr);
+ pr_info("%s: cs89%c0%s rev %c found at %p ",
+ dev->name,
+ lp->chip_type == CS8900 ? '0' : '2',
+ lp->chip_type == CS8920M ? "M" : "",
+ lp->chip_revision,
+ lp->virt_addr);
reset_chip(dev);
@@ -474,8 +476,8 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;
if (net_debug > 1)
- printk(KERN_INFO "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
- dev->name, i, lp->adapter_cnf);
+ pr_info("%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
+ dev->name, i, lp->adapter_cnf);
/* IRQ. Other chips already probe, see below. */
if (lp->chip_type == CS8900)
@@ -489,15 +491,15 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
/* First check to see if an EEPROM is attached. */
if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
- printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
+ pr_warn("No EEPROM, relying on command line....\n");
else if (get_eeprom_data(dev, START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) {
- printk(KERN_WARNING "\ncs89x0: EEPROM read failed, relying on command line.\n");
+ pr_warn("EEPROM read failed, relying on command line\n");
} else if (get_eeprom_cksum(START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) {
/* Check if the chip was able to read its own configuration starting
at 0 in the EEPROM*/
if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) !=
(EEPROM_OK | EEPROM_PRESENT))
- printk(KERN_WARNING "cs89x0: Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
+ pr_warn("Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
} else {
/* This reads an extended EEPROM that is not documented
@@ -519,8 +521,8 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
dev->dev_addr[i * 2 + 1] = eeprom_buff[i] >> 8;
}
if (net_debug > 1)
- printk(KERN_DEBUG "%s: new adapter_cnf: 0x%x\n",
- dev->name, lp->adapter_cnf);
+ pr_debug("%s: new adapter_cnf: 0x%x\n",
+ dev->name, lp->adapter_cnf);
}
/* allow them to force multiple transceivers. If they force multiple, autosense */
@@ -536,8 +538,8 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
}
if (net_debug > 1)
- printk(KERN_DEBUG "%s: after force 0x%x, adapter_cnf=0x%x\n",
- dev->name, lp->force, lp->adapter_cnf);
+ pr_debug("%s: after force 0x%x, adapter_cnf=0x%x\n",
+ dev->name, lp->force, lp->adapter_cnf);
/* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
@@ -547,10 +549,10 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
* ifconfig IFACE hw ether AABBCCDDEEFF
*/
- printk(KERN_INFO "cs89x0 media %s%s%s",
- (lp->adapter_cnf & A_CNF_10B_T) ? "RJ-45," : "",
- (lp->adapter_cnf & A_CNF_AUI) ? "AUI," : "",
- (lp->adapter_cnf & A_CNF_10B_2) ? "BNC," : "");
+ pr_info("media %s%s%s",
+ (lp->adapter_cnf & A_CNF_10B_T) ? "RJ-45," : "",
+ (lp->adapter_cnf & A_CNF_AUI) ? "AUI," : "",
+ (lp->adapter_cnf & A_CNF_10B_2) ? "BNC," : "");
lp->irq_map = 0xffff;
@@ -570,7 +572,7 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
#else
/* Translate the IRQ using the IRQ mapping table. */
if (i >= ARRAY_SIZE(cs8900_irq_map))
- printk("\ncs89x0: invalid ISA interrupt number %d\n", i);
+ pr_err("invalid ISA interrupt number %d\n", i);
else
i = cs8900_irq_map[i];
@@ -660,15 +662,12 @@ cs89x0_ioport_probe(struct net_device *dev, unsigned long ioport, int modular)
*/
if (ioport & 1) {
if (net_debug > 1)
- printk(KERN_INFO "%s: odd ioaddr 0x%lx\n",
- dev->name,
- ioport);
+ pr_info("%s: odd ioaddr 0x%lx\n", dev->name, ioport);
if ((ioport & 2) != 2)
if ((ioread16(io_mem + ADD_PORT) & ADD_MASK) !=
ADD_SIG) {
- printk(KERN_ERR "%s: bad signature 0x%x\n",
- dev->name,
- ioread16(io_mem + ADD_PORT));
+ pr_err("%s: bad signature 0x%x\n",
+ dev->name, ioread16(io_mem + ADD_PORT));
ret = -ENODEV;
goto unmap;
}
@@ -711,7 +710,7 @@ struct net_device * __init cs89x0_probe(int unit)
irq = dev->irq;
if (net_debug)
- printk(KERN_INFO "cs89x0:cs89x0_probe(0x%x)\n", io);
+ pr_info("cs89x0_probe(0x%x)\n", io);
if (io > 0x1ff) { /* Check a single specified location. */
err = cs89x0_ioport_probe(dev, io, 0);
@@ -731,7 +730,7 @@ struct net_device * __init cs89x0_probe(int unit)
return dev;
out:
free_netdev(dev);
- printk(KERN_WARNING "cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
+ pr_warn("no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
return ERR_PTR(err);
}
#endif
@@ -1012,10 +1011,10 @@ detect_tp(struct net_device *dev)
writereg(dev, PP_AutoNegCTL, lp->auto_neg_cnf & AUTO_NEG_MASK);
if ((lp->auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) {
- printk(KERN_INFO "%s: negotiating duplex...\n", dev->name);
+ pr_info("%s: negotiating duplex...\n", dev->name);
while (readreg(dev, PP_AutoNegST) & AUTO_NEG_BUSY) {
if (jiffies - timenow > 4000) {
- printk(KERN_ERR "**** Full / half duplex auto-negotiation timed out ****\n");
+ pr_err("**** Full / half duplex auto-negotiation timed out ****\n");
break;
}
}
@@ -1167,7 +1166,7 @@ net_open(struct net_device *dev)
if (i >= CS8920_NO_INTS) {
writereg(dev, PP_BusCTL, 0); /* disable interrupts. */
- printk(KERN_ERR "cs89x0: can't get an interrupt\n");
+ pr_err("can't get an interrupt\n");
ret = -EAGAIN;
goto bad_out;
}
@@ -1176,7 +1175,7 @@ net_open(struct net_device *dev)
{
#if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM)
if (((1 << dev->irq) & lp->irq_map) == 0) {
- printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
+ pr_err("%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);
ret = -EAGAIN;
goto bad_out;
@@ -1191,7 +1190,7 @@ net_open(struct net_device *dev)
write_irq(dev, lp->chip_type, dev->irq);
ret = request_irq(dev->irq, net_interrupt, 0, dev->name, dev);
if (ret) {
- printk(KERN_ERR "cs89x0: request_irq(%d) failed\n", dev->irq);
+ pr_err("request_irq(%d) failed\n", dev->irq);
goto bad_out;
}
}
@@ -1204,7 +1203,8 @@ net_open(struct net_device *dev)
get_order(lp->dmasize * 1024));
if (!lp->dma_buff) {
- printk(KERN_ERR "%s: cannot get %dK memory for DMA\n", dev->name, lp->dmasize);
+ pr_err("%s: cannot get %dK memory for DMA\n",
+ dev->name, lp->dmasize);
goto release_irq;
}
if (net_debug > 1) {
@@ -1215,12 +1215,14 @@ net_open(struct net_device *dev)
}
if ((unsigned long) lp->dma_buff >= MAX_DMA_ADDRESS ||
!dma_page_eq(lp->dma_buff, lp->dma_buff+lp->dmasize*1024-1)) {
- printk(KERN_ERR "%s: not usable as DMA buffer\n", dev->name);
+ pr_err("%s: not usable as DMA buffer\n",
+ dev->name);
goto release_irq;
}
memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */
if (request_dma(dev->dma, dev->name)) {
- printk(KERN_ERR "%s: cannot get dma channel %d\n", dev->name, dev->dma);
+ pr_err("%s: cannot get dma channel %d\n",
+ dev->name, dev->dma);
goto release_irq;
}
write_dma(dev, lp->chip_type, dev->dma);
@@ -1259,7 +1261,8 @@ net_open(struct net_device *dev)
default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
}
if (!result) {
- printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
+ pr_err("%s: EEPROM is configured for unavailable media\n",
+ dev->name);
release_dma:
#if ALLOW_DMA
free_dma(dev->dma);
@@ -1277,7 +1280,8 @@ release_irq:
case A_CNF_MEDIA_10B_T:
result = detect_tp(dev);
if (result == DETECTED_NONE) {
- printk(KERN_WARNING "%s: 10Base-T (RJ-45) has no cable\n", dev->name);
+ pr_warn("%s: 10Base-T (RJ-45) has no cable\n",
+ dev->name);
if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
result = DETECTED_RJ45H; /* Yes! I don't care if I see a link pulse */
}
@@ -1285,7 +1289,7 @@ release_irq:
case A_CNF_MEDIA_AUI:
result = detect_aui(dev);
if (result == DETECTED_NONE) {
- printk(KERN_WARNING "%s: 10Base-5 (AUI) has no cable\n", dev->name);
+ pr_warn("%s: 10Base-5 (AUI) has no cable\n", dev->name);
if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
result = DETECTED_AUI; /* Yes! I don't care if I see a carrrier */
}
@@ -1293,7 +1297,7 @@ release_irq:
case A_CNF_MEDIA_10B_2:
result = detect_bnc(dev);
if (result == DETECTED_NONE) {
- printk(KERN_WARNING "%s: 10Base-2 (BNC) has no cable\n", dev->name);
+ pr_warn("%s: 10Base-2 (BNC) has no cable\n", dev->name);
if (lp->auto_neg_cnf & IMM_BIT) /* check "ignore missing media" bit */
result = DETECTED_BNC; /* Yes! I don't care if I can xmit a packet */
}
@@ -1309,24 +1313,25 @@ release_irq:
if (lp->adapter_cnf & A_CNF_10B_2)
if ((result = detect_bnc(dev)) != DETECTED_NONE)
break;
- printk(KERN_ERR "%s: no media detected\n", dev->name);
+ pr_err("%s: no media detected\n", dev->name);
goto release_dma;
}
switch (result) {
case DETECTED_NONE:
- printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
+ pr_err("%s: no network cable attached to configured media\n",
+ dev->name);
goto release_dma;
case DETECTED_RJ45H:
- printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
+ pr_info("%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
break;
case DETECTED_RJ45F:
- printk(KERN_INFO "%s: using full-duplex 10Base-T (RJ-45)\n", dev->name);
+ pr_info("%s: using full-duplex 10Base-T (RJ-45)\n", dev->name);
break;
case DETECTED_AUI:
- printk(KERN_INFO "%s: using 10Base-5 (AUI)\n", dev->name);
+ pr_info("%s: using 10Base-5 (AUI)\n", dev->name);
break;
case DETECTED_BNC:
- printk(KERN_INFO "%s: using 10Base-2 (BNC)\n", dev->name);
+ pr_info("%s: using 10Base-2 (BNC)\n", dev->name);
break;
}
@@ -1566,7 +1571,7 @@ net_rx(struct net_device *dev)
skb = netdev_alloc_skb(dev, length + 2);
if (skb == NULL) {
#if 0 /* Again, this seems a cruel thing to do */
- printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name);
+ pr_warn("%s: Memory squeeze, dropping packet\n", dev->name);
#endif
dev->stats.rx_dropped++;
return;
@@ -1808,8 +1813,8 @@ int __init init_module(void)
lp->auto_neg_cnf = AUTO_NEG_ENABLE;
if (io == 0) {
- printk(KERN_ERR "cs89x0.c: Module autoprobing not allowed.\n");
- printk(KERN_ERR "cs89x0.c: Append io=0xNNN\n");
+ pr_err("Module autoprobing not allowed\n");
+ pr_err("Append io=0xNNN\n");
ret = -EPERM;
goto out;
} else if (io <= 0x1ff) {
@@ -1819,7 +1824,8 @@ int __init init_module(void)
#if ALLOW_DMA
if (use_dma && dmasize != 16 && dmasize != 64) {
- printk(KERN_ERR "cs89x0.c: dma size must be either 16K or 64K, not %dK\n", dmasize);
+ pr_err("dma size must be either 16K or 64K, not %dK\n",
+ dmasize);
ret = -EPERM;
goto out;
}
--
1.7.8.111.gad25c.dirty
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH net-next 3/5] cirrus: cs89x0: Code neatening
2012-05-18 22:56 [PATCH net-next 0/5] cirrus: cs89x0: Neatening Joe Perches
2012-05-18 22:56 ` [PATCH net-next 1/5] cirrus: cs89x0: Code style neatening Joe Perches
2012-05-18 22:56 ` [PATCH net-next 2/5] cirrus: cs89x0: Convert printks to pr_<level> Joe Perches
@ 2012-05-18 22:56 ` Joe Perches
2012-05-18 22:56 ` [PATCH net-next 4/5] cirrus: cs89x0: Neaten debugging and logging Joe Perches
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Joe Perches @ 2012-05-18 22:56 UTC (permalink / raw)
To: netdev, linux-kernel; +Cc: Jaccon Bastiaansen
Just some stylings.
Use #include <linux... not #include <asm...
Convert a test and print to a printk_once.
Combine an "if (foo) { if (bar) {" to single "if (foo && bar) {"
to save an indent level.
Convert single line "if (foo) bar;" to multiple lines.
Move some braces.
Align some long lines a bit better.
Long lines and printks with KERN_ checkpatch complaints
still exist.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/ethernet/cirrus/cs89x0.c | 452 ++++++++++++++++++++--------------
1 files changed, 272 insertions(+), 180 deletions(-)
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index b612040..6e5b2c7 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -67,8 +67,8 @@
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/gfp.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <linux/atomic.h>
#if ALLOW_DMA
@@ -78,7 +78,7 @@
#include "cs89x0.h"
static char version[] __initdata =
- "cs89x0.c: v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton\n";
+ "v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton\n";
#define DRV_NAME "cs89x0"
@@ -97,17 +97,29 @@ static char version[] __initdata =
*/
#if defined(CONFIG_MACH_IXDP2351)
#define CS89x0_NONISA_IRQ
-static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0};
-static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
+static unsigned int netcard_portlist[] __used __initdata = {
+ IXDP2351_VIRT_CS8900_BASE, 0
+};
+static unsigned int cs8900_irq_map[] = {
+ IRQ_IXDP2351_CS8900, 0, 0, 0
+};
#elif defined(CONFIG_ARCH_IXDP2X01)
#define CS89x0_NONISA_IRQ
-static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
-static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
+static unsigned int netcard_portlist[] __used __initdata = {
+ IXDP2X01_CS8900_VIRT_BASE, 0
+};
+static unsigned int cs8900_irq_map[] = {
+ IRQ_IXDP2X01_CS8900, 0, 0, 0
+};
#else
#ifndef CONFIG_CS89x0_PLATFORM
-static unsigned int netcard_portlist[] __used __initdata =
-{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
-static unsigned int cs8900_irq_map[] = {10, 11, 12, 5};
+static unsigned int netcard_portlist[] __used __initdata = {
+ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240,
+ 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0
+};
+static unsigned int cs8900_irq_map[] = {
+ 10, 11, 12, 5
+};
#endif
#endif
@@ -201,9 +213,13 @@ static int g_cs89x0_media__force;
static int __init media_fn(char *str)
{
- if (!strcmp(str, "rj45")) g_cs89x0_media__force = FORCE_RJ45;
- else if (!strcmp(str, "aui")) g_cs89x0_media__force = FORCE_AUI;
- else if (!strcmp(str, "bnc")) g_cs89x0_media__force = FORCE_BNC;
+ if (!strcmp(str, "rj45"))
+ g_cs89x0_media__force = FORCE_RJ45;
+ else if (!strcmp(str, "aui"))
+ g_cs89x0_media__force = FORCE_AUI;
+ else if (!strcmp(str, "bnc"))
+ g_cs89x0_media__force = FORCE_BNC;
+
return 1;
}
@@ -299,16 +315,21 @@ get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
{
int i;
- if (net_debug > 3) printk("EEPROM data from %x for %x:\n", off, len);
+ if (net_debug > 3)
+ printk("EEPROM data from %x for %x:\n", off, len);
for (i = 0; i < len; i++) {
- if (wait_eeprom_ready(dev) < 0) return -1;
+ if (wait_eeprom_ready(dev) < 0)
+ return -1;
/* Now send the EEPROM read command and EEPROM location to read */
writereg(dev, PP_EECMD, (off + i) | EEPROM_READ_CMD);
- if (wait_eeprom_ready(dev) < 0) return -1;
+ if (wait_eeprom_ready(dev) < 0)
+ return -1;
buffer[i] = readreg(dev, PP_EEData);
- if (net_debug > 3) printk("%04x ", buffer[i]);
+ if (net_debug > 3)
+ printk("%04x ", buffer[i]);
}
- if (net_debug > 3) printk("\n");
+ if (net_debug > 3)
+ printk("\n");
return 0;
}
@@ -364,7 +385,6 @@ static int __init
cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
{
struct net_local *lp = netdev_priv(dev);
- static unsigned version_printed;
int i;
int tmp;
unsigned rev_type = 0;
@@ -415,8 +435,8 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
lp->send_cmd = TX_NOW;
- if (net_debug && version_printed++ == 0)
- printk(version);
+ if (net_debug)
+ printk_once(version);
pr_info("%s: cs89%c0%s rev %c found at %p ",
dev->name,
@@ -436,7 +456,7 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
*/
if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
- (EEPROM_OK|EEPROM_PRESENT)) {
+ (EEPROM_OK | EEPROM_PRESENT)) {
/* Load the MAC. */
for (i = 0; i < ETH_ALEN / 2; i++) {
unsigned int Addr;
@@ -507,12 +527,14 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
*/
/* get transmission control word but keep the autonegotiation bits */
- if (!lp->auto_neg_cnf) lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
+ if (!lp->auto_neg_cnf)
+ lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET / 2];
/* Store adapter configuration */
- if (!lp->adapter_cnf) lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET/2];
+ if (!lp->adapter_cnf)
+ lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET / 2];
/* Store ISA configuration */
- lp->isa_config = eeprom_buff[ISA_CNF_OFFSET/2];
- dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET/2] << 8;
+ lp->isa_config = eeprom_buff[ISA_CNF_OFFSET / 2];
+ dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET / 2] << 8;
/* eeprom_buff has 32-bit ints, so we can't just memcpy it */
/* store the initial memory base address */
@@ -528,13 +550,26 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
/* allow them to force multiple transceivers. If they force multiple, autosense */
{
int count = 0;
- if (lp->force & FORCE_RJ45) {lp->adapter_cnf |= A_CNF_10B_T; count++; }
- if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_AUI; count++; }
- if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_10B_2; count++; }
- if (count > 1) {lp->adapter_cnf |= A_CNF_MEDIA_AUTO; }
- else if (lp->force & FORCE_RJ45){lp->adapter_cnf |= A_CNF_MEDIA_10B_T; }
- else if (lp->force & FORCE_AUI) {lp->adapter_cnf |= A_CNF_MEDIA_AUI; }
- else if (lp->force & FORCE_BNC) {lp->adapter_cnf |= A_CNF_MEDIA_10B_2; }
+ if (lp->force & FORCE_RJ45) {
+ lp->adapter_cnf |= A_CNF_10B_T;
+ count++;
+ }
+ if (lp->force & FORCE_AUI) {
+ lp->adapter_cnf |= A_CNF_AUI;
+ count++;
+ }
+ if (lp->force & FORCE_BNC) {
+ lp->adapter_cnf |= A_CNF_10B_2;
+ count++;
+ }
+ if (count > 1)
+ lp->adapter_cnf |= A_CNF_MEDIA_AUTO;
+ else if (lp->force & FORCE_RJ45)
+ lp->adapter_cnf |= A_CNF_MEDIA_10B_T;
+ else if (lp->force & FORCE_AUI)
+ lp->adapter_cnf |= A_CNF_MEDIA_AUI;
+ else if (lp->force & FORCE_BNC)
+ lp->adapter_cnf |= A_CNF_MEDIA_10B_2;
}
if (net_debug > 1)
@@ -584,7 +619,8 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
IRQ_MAP_LEN / 2,
irq_map_buff) >= 0) {
if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT)
- lp->irq_map = (irq_map_buff[0] >> 8) | (irq_map_buff[1] << 8);
+ lp->irq_map = ((irq_map_buff[0] >> 8) |
+ (irq_map_buff[1] << 8));
}
#endif
}
@@ -599,20 +635,16 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
if (lp->use_dma) {
get_dma_channel(dev);
printk(", DMA %d", dev->dma);
- }
- else
+ } else
#endif
- {
printk(", programmed I/O");
- }
/* print the ethernet address. */
- printk(", MAC %pM", dev->dev_addr);
+ printk(", MAC %pM\n", dev->dev_addr);
dev->netdev_ops = &net_ops;
dev->watchdog_timeo = HZ;
- printk("\n");
if (net_debug)
printk("cs89x0_probe1() successful\n");
@@ -663,7 +695,7 @@ cs89x0_ioport_probe(struct net_device *dev, unsigned long ioport, int modular)
if (ioport & 1) {
if (net_debug > 1)
pr_info("%s: odd ioaddr 0x%lx\n", dev->name, ioport);
- if ((ioport & 2) != 2)
+ if ((ioport & 2) != 2) {
if ((ioread16(io_mem + ADD_PORT) & ADD_MASK) !=
ADD_SIG) {
pr_err("%s: bad signature 0x%x\n",
@@ -671,6 +703,7 @@ cs89x0_ioport_probe(struct net_device *dev, unsigned long ioport, int modular)
ret = -ENODEV;
goto unmap;
}
+ }
}
ret = cs89x0_probe1(dev, io_mem, modular);
@@ -742,7 +775,7 @@ out:
#if ALLOW_DMA
-#define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17)
+#define dma_page_eq(ptr1, ptr2) ((long)(ptr1) >> 17 == (long)(ptr2) >> 17)
static void
get_dma_channel(struct net_device *dev)
@@ -771,11 +804,10 @@ write_dma(struct net_device *dev, int chip_type, int dma)
struct net_local *lp = netdev_priv(dev);
if ((lp->isa_config & ANY_ISA_DMA) == 0)
return;
- if (chip_type == CS8900) {
- writereg(dev, PP_CS8900_ISADMA, dma-5);
- } else {
+ if (chip_type == CS8900)
+ writereg(dev, PP_CS8900_ISADMA, dma - 5);
+ else
writereg(dev, PP_CS8920_ISADMA, dma);
- }
}
static void
@@ -836,8 +868,8 @@ dma_rx(struct net_device *dev)
int status, length;
unsigned char *bp = lp->rx_dma_ptr;
- status = bp[0] + (bp[1]<<8);
- length = bp[2] + (bp[3]<<8);
+ status = bp[0] + (bp[1] << 8);
+ length = bp[2] + (bp[3] << 8);
bp += 4;
if (net_debug > 5) {
printk("%s: receiving DMA packet at %lx, status %x, length %x\n",
@@ -852,13 +884,15 @@ dma_rx(struct net_device *dev)
skb = netdev_alloc_skb(dev, length + 2);
if (skb == NULL) {
if (net_debug) /* I don't think we want to do this to a stressed system */
- printk("%s: Memory squeeze, dropping packet.\n", dev->name);
+ printk("%s: Memory squeeze, dropping packet\n",
+ dev->name);
dev->stats.rx_dropped++;
/* AKPM: advance bp to the next frame */
skip_this_frame:
bp += (length + 3) & ~3;
- if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
+ if (bp >= lp->end_dma_buff)
+ bp -= lp->dmasize * 1024;
lp->rx_dma_ptr = bp;
return;
}
@@ -873,13 +907,15 @@ skip_this_frame:
memcpy(skb_put(skb, length), bp, length);
}
bp += (length + 3) & ~3;
- if (bp >= lp->end_dma_buff) bp -= lp->dmasize*1024;
+ if (bp >= lp->end_dma_buff)
+ bp -= lp->dmasize*1024;
lp->rx_dma_ptr = bp;
if (net_debug > 3) {
printk("%s: received %d byte DMA packet of type %x\n",
dev->name, length,
- (skb->data[ETH_ALEN + ETH_ALEN] << 8) | skb->data[ETH_ALEN + ETH_ALEN + 1]);
+ ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]));
}
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
@@ -919,7 +955,8 @@ static void __init reset_chip(struct net_device *dev)
/* Wait until the chip is reset */
reset_start_time = jiffies;
- while ((readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
+ while ((readreg(dev, PP_SelfST) & INIT_DONE) == 0 &&
+ jiffies - reset_start_time < 2)
;
#endif /* !CONFIG_MACH_MX31ADS */
}
@@ -932,8 +969,9 @@ control_dc_dc(struct net_device *dev, int on_not_off)
unsigned int selfcontrol;
int timenow = jiffies;
/* control the DC to DC convertor in the SelfControl register.
- Note: This is hooked up to a general purpose pin, might not
- always be a DC to DC convertor. */
+ * Note: This is hooked up to a general purpose pin, might not
+ * always be a DC to DC convertor.
+ */
selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */
if (((lp->adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off)
@@ -960,18 +998,23 @@ detect_tp(struct net_device *dev)
int timenow = jiffies;
int fdx;
- if (net_debug > 1) printk("%s: Attempting TP\n", dev->name);
-
- /* If connected to another full duplex capable 10-Base-T card the link pulses
- seem to be lost when the auto detect bit in the LineCTL is set.
- To overcome this the auto detect bit will be cleared whilst testing the
- 10-Base-T interface. This would not be necessary for the sparrow chip but
- is simpler to do it anyway. */
+ if (net_debug > 1)
+ printk("%s: Attempting TP\n", dev->name);
+
+ /* If connected to another full duplex capable 10-Base-T card
+ * the link pulses seem to be lost when the auto detect bit in
+ * the LineCTL is set. To overcome this the auto detect bit will
+ * be cleared whilst testing the 10-Base-T interface. This would
+ * not be necessary for the sparrow chip but is simpler to do it
+ * anyway.
+ */
writereg(dev, PP_LineCTL, lp->linectl & ~AUI_ONLY);
control_dc_dc(dev, 0);
- /* Delay for the hardware to work out if the TP cable is present - 150ms */
- for (timenow = jiffies; jiffies - timenow < 15; )
+ /* Delay for the hardware to work out if the TP cable is present
+ * - 150ms
+ */
+ for (timenow = jiffies; jiffies - timenow < 15;)
;
if ((readreg(dev, PP_LineST) & LINK_OK) == 0)
return DETECTED_NONE;
@@ -991,7 +1034,8 @@ detect_tp(struct net_device *dev)
case FORCE_HALF:
break;
case FORCE_FULL:
- writereg(dev, PP_TestCTL, readreg(dev, PP_TestCTL) | FDX_8900);
+ writereg(dev, PP_TestCTL,
+ readreg(dev, PP_TestCTL) | FDX_8900);
break;
}
fdx = readreg(dev, PP_TestCTL) & FDX_8900;
@@ -1032,10 +1076,12 @@ static int
send_test_pkt(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
- char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0,
- 0, 46, /* A 46 in network order */
- 0, 0, /* DSAP=0 & SSAP=0 fields */
- 0xf3, 0 /* Control (Test Req + P bit set) */ };
+ char test_packet[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 46, /* A 46 in network order */
+ 0, 0, /* DSAP=0 & SSAP=0 fields */
+ 0xf3, 0 /* Control (Test Req + P bit set) */
+ };
long timenow = jiffies;
writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON);
@@ -1054,17 +1100,20 @@ send_test_pkt(struct net_device *dev)
return 0; /* this shouldn't happen */
/* Write the contents of the packet */
- writewords(lp, TX_FRAME_PORT, test_packet, (ETH_ZLEN+1) >> 1);
+ writewords(lp, TX_FRAME_PORT, test_packet, (ETH_ZLEN + 1) >> 1);
- if (net_debug > 1) printk("Sending test packet ");
+ if (net_debug > 1)
+ printk("Sending test packet ");
/* wait a couple of jiffies for packet to be received */
- for (timenow = jiffies; jiffies - timenow < 3; )
+ for (timenow = jiffies; jiffies - timenow < 3;)
;
if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
- if (net_debug > 1) printk("succeeded\n");
+ if (net_debug > 1)
+ printk("succeeded\n");
return 1;
}
- if (net_debug > 1) printk("failed\n");
+ if (net_debug > 1)
+ printk("failed\n");
return 0;
}
@@ -1074,7 +1123,8 @@ detect_aui(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
- if (net_debug > 1) printk("%s: Attempting AUI\n", dev->name);
+ if (net_debug > 1)
+ printk("%s: Attempting AUI\n", dev->name);
control_dc_dc(dev, 0);
writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
@@ -1090,7 +1140,8 @@ detect_bnc(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
- if (net_debug > 1) printk("%s: Attempting BNC\n", dev->name);
+ if (net_debug > 1)
+ printk("%s: Attempting BNC\n", dev->name);
control_dc_dc(dev, 1);
writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
@@ -1155,7 +1206,8 @@ net_open(struct net_device *dev)
for (i = 2; i < CS8920_NO_INTS; i++) {
if ((1 << i) & lp->irq_map) {
- if (request_irq(i, net_interrupt, 0, dev->name, dev) == 0) {
+ if (request_irq(i, net_interrupt, 0, dev->name,
+ dev) == 0) {
dev->irq = i;
write_irq(dev, lp->chip_type, i);
/* writereg(dev, PP_BufCFG, GENERATE_SW_INTERRUPT); */
@@ -1170,9 +1222,7 @@ net_open(struct net_device *dev)
ret = -EAGAIN;
goto bad_out;
}
- }
- else
- {
+ } else {
#if !defined(CS89x0_NONISA_IRQ) && !defined(CONFIG_CS89x0_PLATFORM)
if (((1 << dev->irq) & lp->irq_map) == 0) {
pr_err("%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
@@ -1196,69 +1246,78 @@ net_open(struct net_device *dev)
}
#if ALLOW_DMA
- if (lp->use_dma) {
- if (lp->isa_config & ANY_ISA_DMA) {
- unsigned long flags;
- lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL,
- get_order(lp->dmasize * 1024));
-
- if (!lp->dma_buff) {
- pr_err("%s: cannot get %dK memory for DMA\n",
- dev->name, lp->dmasize);
- goto release_irq;
- }
- if (net_debug > 1) {
- printk("%s: dma %lx %lx\n",
- dev->name,
- (unsigned long)lp->dma_buff,
- (unsigned long)isa_virt_to_bus(lp->dma_buff));
- }
- if ((unsigned long) lp->dma_buff >= MAX_DMA_ADDRESS ||
- !dma_page_eq(lp->dma_buff, lp->dma_buff+lp->dmasize*1024-1)) {
- pr_err("%s: not usable as DMA buffer\n",
- dev->name);
- goto release_irq;
- }
- memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */
- if (request_dma(dev->dma, dev->name)) {
- pr_err("%s: cannot get dma channel %d\n",
- dev->name, dev->dma);
- goto release_irq;
- }
- write_dma(dev, lp->chip_type, dev->dma);
- lp->rx_dma_ptr = lp->dma_buff;
- lp->end_dma_buff = lp->dma_buff + lp->dmasize*1024;
- spin_lock_irqsave(&lp->lock, flags);
- disable_dma(dev->dma);
- clear_dma_ff(dev->dma);
- set_dma_mode(dev->dma, DMA_RX_MODE); /* auto_init as well */
- set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff));
- set_dma_count(dev->dma, lp->dmasize*1024);
- enable_dma(dev->dma);
- spin_unlock_irqrestore(&lp->lock, flags);
+ if (lp->use_dma && (lp->isa_config & ANY_ISA_DMA)) {
+ unsigned long flags;
+ lp->dma_buff = (unsigned char *)__get_dma_pages(GFP_KERNEL,
+ get_order(lp->dmasize * 1024));
+ if (!lp->dma_buff) {
+ pr_err("%s: cannot get %dK memory for DMA\n",
+ dev->name, lp->dmasize);
+ goto release_irq;
+ }
+ if (net_debug > 1) {
+ printk("%s: dma %lx %lx\n",
+ dev->name,
+ (unsigned long)lp->dma_buff,
+ (unsigned long)isa_virt_to_bus(lp->dma_buff));
+ }
+ if ((unsigned long)lp->dma_buff >= MAX_DMA_ADDRESS ||
+ !dma_page_eq(lp->dma_buff,
+ lp->dma_buff + lp->dmasize * 1024 - 1)) {
+ pr_err("%s: not usable as DMA buffer\n", dev->name);
+ goto release_irq;
}
+ memset(lp->dma_buff, 0, lp->dmasize * 1024); /* Why? */
+ if (request_dma(dev->dma, dev->name)) {
+ pr_err("%s: cannot get dma channel %d\n",
+ dev->name, dev->dma);
+ goto release_irq;
+ }
+ write_dma(dev, lp->chip_type, dev->dma);
+ lp->rx_dma_ptr = lp->dma_buff;
+ lp->end_dma_buff = lp->dma_buff + lp->dmasize * 1024;
+ spin_lock_irqsave(&lp->lock, flags);
+ disable_dma(dev->dma);
+ clear_dma_ff(dev->dma);
+ set_dma_mode(dev->dma, DMA_RX_MODE); /* auto_init as well */
+ set_dma_addr(dev->dma, isa_virt_to_bus(lp->dma_buff));
+ set_dma_count(dev->dma, lp->dmasize * 1024);
+ enable_dma(dev->dma);
+ spin_unlock_irqrestore(&lp->lock, flags);
}
#endif /* ALLOW_DMA */
/* set the Ethernet address */
for (i = 0; i < ETH_ALEN / 2; i++)
- writereg(dev, PP_IA + i * 2, dev->dev_addr[i * 2] | (dev->dev_addr[i * 2 + 1] << 8));
+ writereg(dev, PP_IA + i * 2,
+ (dev->dev_addr[i * 2] |
+ (dev->dev_addr[i * 2 + 1] << 8)));
/* while we're testing the interface, leave interrupts disabled */
writereg(dev, PP_BusCTL, MEMORY_ON);
/* Set the LineCTL quintuplet based on adapter configuration read from EEPROM */
- if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) && (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
+ if ((lp->adapter_cnf & A_CNF_EXTND_10B_2) &&
+ (lp->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
lp->linectl = LOW_RX_SQUELCH;
else
lp->linectl = 0;
/* check to make sure that they have the "right" hardware available */
switch (lp->adapter_cnf & A_CNF_MEDIA_TYPE) {
- case A_CNF_MEDIA_10B_T: result = lp->adapter_cnf & A_CNF_10B_T; break;
- case A_CNF_MEDIA_AUI: result = lp->adapter_cnf & A_CNF_AUI; break;
- case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
- default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
+ case A_CNF_MEDIA_10B_T:
+ result = lp->adapter_cnf & A_CNF_10B_T;
+ break;
+ case A_CNF_MEDIA_AUI:
+ result = lp->adapter_cnf & A_CNF_AUI;
+ break;
+ case A_CNF_MEDIA_10B_2:
+ result = lp->adapter_cnf & A_CNF_10B_2;
+ break;
+ default:
+ result = lp->adapter_cnf & (A_CNF_10B_T |
+ A_CNF_AUI |
+ A_CNF_10B_2);
}
if (!result) {
pr_err("%s: EEPROM is configured for unavailable media\n",
@@ -1269,7 +1328,8 @@ release_dma:
release_irq:
release_dma_buff(lp);
#endif
- writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON));
+ writereg(dev, PP_LineCTL,
+ readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON));
free_irq(dev->irq, dev);
ret = -EAGAIN;
goto bad_out;
@@ -1304,15 +1364,21 @@ release_irq:
break;
case A_CNF_MEDIA_AUTO:
writereg(dev, PP_LineCTL, lp->linectl | AUTO_AUI_10BASET);
- if (lp->adapter_cnf & A_CNF_10B_T)
- if ((result = detect_tp(dev)) != DETECTED_NONE)
+ if (lp->adapter_cnf & A_CNF_10B_T) {
+ result = detect_tp(dev);
+ if (result != DETECTED_NONE)
break;
- if (lp->adapter_cnf & A_CNF_AUI)
- if ((result = detect_aui(dev)) != DETECTED_NONE)
+ }
+ if (lp->adapter_cnf & A_CNF_AUI) {
+ result = detect_aui(dev);
+ if (result != DETECTED_NONE)
break;
- if (lp->adapter_cnf & A_CNF_10B_2)
- if ((result = detect_bnc(dev)) != DETECTED_NONE)
+ }
+ if (lp->adapter_cnf & A_CNF_10B_2) {
+ result = detect_bnc(dev);
+ if (result != DETECTED_NONE)
break;
+ }
pr_err("%s: no media detected\n", dev->name);
goto release_dma;
}
@@ -1336,7 +1402,8 @@ release_irq:
}
/* Turn on both receive and transmit operations */
- writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
+ writereg(dev, PP_LineCTL,
+ readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
/* Receive only error free packets addressed to this card */
lp->rx_mode = 0;
@@ -1351,22 +1418,29 @@ release_irq:
#endif
writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
- writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
- TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
+ writereg(dev, PP_TxCFG, (TX_LOST_CRS_ENBL |
+ TX_SQE_ERROR_ENBL |
+ TX_OK_ENBL |
+ TX_LATE_COL_ENBL |
+ TX_JBR_ENBL |
+ TX_ANY_COL_ENBL |
+ TX_16_COL_ENBL));
- writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
+ writereg(dev, PP_BufCFG, (READY_FOR_TX_ENBL |
+ RX_MISS_COUNT_OVRFLOW_ENBL |
#if ALLOW_DMA
- dma_bufcfg(dev) |
+ dma_bufcfg(dev) |
#endif
- TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
+ TX_COL_COUNT_OVRFLOW_ENBL |
+ TX_UNDERRUN_ENBL));
/* now that we've got our act together, enable everything */
- writereg(dev, PP_BusCTL, ENABLE_IRQ
- | (dev->mem_start ? MEMORY_ON : 0) /* turn memory on */
+ writereg(dev, PP_BusCTL, (ENABLE_IRQ
+ | (dev->mem_start ? MEMORY_ON : 0) /* turn memory on */
#if ALLOW_DMA
- | dma_busctl(dev)
+ | dma_busctl(dev)
#endif
- );
+ ));
netif_start_queue(dev);
if (net_debug > 1)
printk("cs89x0: net_open() succeeded\n");
@@ -1379,8 +1453,10 @@ static void net_timeout(struct net_device *dev)
{
/* If we get here, some higher level has decided we are broken.
There should really be a "kick me" function call instead. */
- if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name,
- tx_done(dev) ? "IRQ conflict ?" : "network cable problem");
+ if (net_debug > 0)
+ printk("%s: transmit timed out, %s?\n",
+ dev->name,
+ tx_done(dev) ? "IRQ conflict" : "network cable problem");
/* Try to restart the adaptor. */
netif_wake_queue(dev);
}
@@ -1393,12 +1469,14 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev)
if (net_debug > 3) {
printk("%s: sent %d byte packet of type %x\n",
dev->name, skb->len,
- (skb->data[ETH_ALEN + ETH_ALEN] << 8) | skb->data[ETH_ALEN + ETH_ALEN + 1]);
+ ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]));
}
/* keep the upload from being interrupted, since we
- ask the chip to start transmitting before the
- whole packet has been completely uploaded. */
+ * ask the chip to start transmitting before the
+ * whole packet has been completely uploaded.
+ */
spin_lock_irqsave(&lp->lock, flags);
netif_stop_queue(dev);
@@ -1414,11 +1492,12 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev)
*/
spin_unlock_irqrestore(&lp->lock, flags);
- if (net_debug) printk("cs89x0: Tx buffer not free!\n");
+ if (net_debug)
+ printk("cs89x0: Tx buffer not free!\n");
return NETDEV_TX_BUSY;
}
/* Write the contents of the packet */
- writewords(lp, TX_FRAME_PORT, skb->data, (skb->len+1) >> 1);
+ writewords(lp, TX_FRAME_PORT, skb->data, (skb->len + 1) >> 1);
spin_unlock_irqrestore(&lp->lock, flags);
dev->stats.tx_bytes += skb->len;
dev_kfree_skb(skb);
@@ -1427,10 +1506,10 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev)
* We also DO NOT call netif_start_queue().
*
* Either of these would cause another bottom half run through
- * net_send_packet() before this packet has fully gone out. That causes
- * us to hit the "Gasp!" above and the send is rescheduled. it runs like
- * a dog. We just return and wait for the Tx completion interrupt handler
- * to restart the netdevice layer
+ * net_send_packet() before this packet has fully gone out.
+ * That causes us to hit the "Gasp!" above and the send is rescheduled.
+ * it runs like a dog. We just return and wait for the Tx completion
+ * interrupt handler to restart the netdevice layer
*/
return NETDEV_TX_OK;
@@ -1458,7 +1537,8 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
* vista, baby!
*/
while ((status = ioread16(lp->virt_addr + ISQ_PORT))) {
- if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
+ if (net_debug > 4)
+ printk("%s: event=%04x\n", dev->name, status);
handled = 1;
switch (status & ISQ_EVENT_MASK) {
case ISQ_RECEIVER_EVENT:
@@ -1496,10 +1576,14 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
netif_wake_queue(dev); /* Inform upper layers. */
}
if (status & TX_UNDERRUN) {
- if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
+ if (net_debug > 0)
+ printk("%s: transmit underrun\n",
+ dev->name);
lp->send_underrun++;
- if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
- else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
+ if (lp->send_underrun == 3)
+ lp->send_cmd = TX_AFTER_381;
+ else if (lp->send_underrun == 6)
+ lp->send_cmd = TX_AFTER_ALL;
/* transmit cycle is done, although
* frame wasn't transmitted - this
* avoids having to wait for the upper
@@ -1513,14 +1597,17 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
int count = readreg(dev, PP_DmaFrameCnt);
while (count) {
if (net_debug > 5)
- printk("%s: receiving %d DMA frames\n", dev->name, count);
+ printk("%s: receiving %d DMA frames\n",
+ dev->name, count);
if (net_debug > 2 && count > 1)
- printk("%s: receiving %d DMA frames\n", dev->name, count);
+ printk("%s: receiving %d DMA frames\n",
+ dev->name, count);
dma_rx(dev);
if (--count == 0)
count = readreg(dev, PP_DmaFrameCnt);
if (net_debug > 2 && count > 0)
- printk("%s: continuing with %d DMA frames\n", dev->name, count);
+ printk("%s: continuing with %d DMA frames\n",
+ dev->name, count);
}
}
#endif
@@ -1544,7 +1631,7 @@ count_rx_errors(int status, struct net_device *dev)
dev->stats.rx_length_errors++;
if (status & RX_EXTRA_DATA)
dev->stats.rx_length_errors++;
- if ((status & RX_CRC_ERROR) && !(status & (RX_EXTRA_DATA|RX_RUNT)))
+ if ((status & RX_CRC_ERROR) && !(status & (RX_EXTRA_DATA | RX_RUNT)))
/* per str 172 */
dev->stats.rx_crc_errors++;
if (status & RX_DRIBBLE)
@@ -1585,7 +1672,8 @@ net_rx(struct net_device *dev)
if (net_debug > 3) {
printk("%s: received %d byte packet of type %x\n",
dev->name, length,
- (skb->data[ETH_ALEN + ETH_ALEN] << 8) | skb->data[ETH_ALEN + ETH_ALEN + 1]);
+ (skb->data[ETH_ALEN + ETH_ALEN] << 8) |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]);
}
skb->protocol = eth_type_trans(skb, dev);
@@ -1598,7 +1686,8 @@ net_rx(struct net_device *dev)
static void release_dma_buff(struct net_local *lp)
{
if (lp->dma_buff) {
- free_pages((unsigned long)(lp->dma_buff), get_order(lp->dmasize * 1024));
+ free_pages((unsigned long)(lp->dma_buff),
+ get_order(lp->dmasize * 1024));
lp->dma_buff = NULL;
}
}
@@ -1656,28 +1745,29 @@ static void set_multicast_list(struct net_device *dev)
unsigned long flags;
spin_lock_irqsave(&lp->lock, flags);
- if (dev->flags&IFF_PROMISC)
- {
+ if (dev->flags & IFF_PROMISC)
lp->rx_mode = RX_ALL_ACCEPT;
- }
else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev))
- {
- /* The multicast-accept list is initialized to accept-all, and we
- rely on higher-level filtering for now. */
+ /* The multicast-accept list is initialized to accept-all,
+ * and we rely on higher-level filtering for now.
+ */
lp->rx_mode = RX_MULTCAST_ACCEPT;
- }
else
lp->rx_mode = 0;
writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
- /* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
- writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
- (lp->rx_mode == RX_ALL_ACCEPT ? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
+ /* in promiscuous mode, we accept errored packets,
+ * so we have to enable interrupts on them also
+ */
+ writereg(dev, PP_RxCFG,
+ (lp->curr_rx_cfg |
+ (lp->rx_mode == RX_ALL_ACCEPT)
+ ? (RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL)
+ : 0));
spin_unlock_irqrestore(&lp->lock, flags);
}
-
static int set_mac_address(struct net_device *dev, void *p)
{
int i;
@@ -1689,12 +1779,14 @@ static int set_mac_address(struct net_device *dev, void *p)
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
if (net_debug)
- printk("%s: Setting MAC address to %pM.\n",
+ printk("%s: Setting MAC address to %pM\n",
dev->name, dev->dev_addr);
/* set the Ethernet address */
for (i = 0; i < ETH_ALEN / 2; i++)
- writereg(dev, PP_IA + i * 2, dev->dev_addr[i * 2] | (dev->dev_addr[i * 2 + 1] << 8));
+ writereg(dev, PP_IA + i * 2,
+ (dev->dev_addr[i * 2] |
+ (dev->dev_addr[i * 2 + 1] << 8)));
return 0;
}
@@ -1871,28 +1963,28 @@ static int __init cs89x0_platform_probe(struct platform_device *pdev)
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->irq = platform_get_irq(pdev, 0);
if (mem_res == NULL || dev->irq <= 0) {
- dev_warn(&dev->dev, "memory/interrupt resource missing.\n");
+ dev_warn(&dev->dev, "memory/interrupt resource missing\n");
err = -ENXIO;
goto free;
}
lp->size = resource_size(mem_res);
if (!request_mem_region(mem_res->start, lp->size, DRV_NAME)) {
- dev_warn(&dev->dev, "request_mem_region() failed.\n");
+ dev_warn(&dev->dev, "request_mem_region() failed\n");
err = -EBUSY;
goto free;
}
virt_addr = ioremap(mem_res->start, lp->size);
if (!virt_addr) {
- dev_warn(&dev->dev, "ioremap() failed.\n");
+ dev_warn(&dev->dev, "ioremap() failed\n");
err = -ENOMEM;
goto release;
}
err = cs89x0_probe1(dev, virt_addr, 0);
if (err) {
- dev_warn(&dev->dev, "no cs8900 or cs8920 detected.\n");
+ dev_warn(&dev->dev, "no cs8900 or cs8920 detected\n");
goto unmap;
}
--
1.7.8.111.gad25c.dirty
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH net-next 4/5] cirrus: cs89x0: Neaten debugging and logging
2012-05-18 22:56 [PATCH net-next 0/5] cirrus: cs89x0: Neatening Joe Perches
` (2 preceding siblings ...)
2012-05-18 22:56 ` [PATCH net-next 3/5] cirrus: cs89x0: Code neatening Joe Perches
@ 2012-05-18 22:56 ` Joe Perches
2012-05-18 22:56 ` [PATCH net-next 5/5] cirrus: cs89x0: Remove function prototypes and reorder declarations Joe Perches
2012-05-19 3:53 ` [PATCH net-next 0/5] cirrus: cs89x0: Neatening David Miller
5 siblings, 0 replies; 7+ messages in thread
From: Joe Perches @ 2012-05-18 22:56 UTC (permalink / raw)
To: netdev, linux-kernel; +Cc: Jaccon Bastiaansen
Introduce and use a debug macro to test and print.
Convert printks to pr_<level>.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/ethernet/cirrus/cs89x0.c | 187 +++++++++++++++-------------------
1 files changed, 82 insertions(+), 105 deletions(-)
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index 6e5b2c7..859f8be 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -77,8 +77,14 @@
#include "cs89x0.h"
+#define cs89_dbg(val, level, fmt, ...) \
+do { \
+ if (val <= net_debug) \
+ pr_##level(fmt, ##__VA_ARGS__); \
+} while (0)
+
static char version[] __initdata =
- "v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton\n";
+ "v2.4.3-pre1 Russell Nelson <nelson@crynwr.com>, Andrew Morton";
#define DRV_NAME "cs89x0"
@@ -315,8 +321,7 @@ get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
{
int i;
- if (net_debug > 3)
- printk("EEPROM data from %x for %x:\n", off, len);
+ cs89_dbg(3, info, "EEPROM data from %x for %x:\n", off, len);
for (i = 0; i < len; i++) {
if (wait_eeprom_ready(dev) < 0)
return -1;
@@ -325,11 +330,9 @@ get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
if (wait_eeprom_ready(dev) < 0)
return -1;
buffer[i] = readreg(dev, PP_EEData);
- if (net_debug > 3)
- printk("%04x ", buffer[i]);
+ cs89_dbg(3, cont, "%04x ", buffer[i]);
}
- if (net_debug > 3)
- printk("\n");
+ cs89_dbg(3, cont, "\n");
return 0;
}
@@ -435,8 +438,7 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
lp->send_cmd = TX_NOW;
- if (net_debug)
- printk_once(version);
+ pr_info_once("%s\n", version);
pr_info("%s: cs89%c0%s rev %c found at %p ",
dev->name,
@@ -495,18 +497,17 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
lp->adapter_cnf |= A_CNF_AUI | A_CNF_10B_T |
A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;
- if (net_debug > 1)
- pr_info("%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
- dev->name, i, lp->adapter_cnf);
+ cs89_dbg(1, info, "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
+ dev->name, i, lp->adapter_cnf);
/* IRQ. Other chips already probe, see below. */
if (lp->chip_type == CS8900)
lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK;
- printk("[Cirrus EEPROM] ");
+ pr_cont("[Cirrus EEPROM] ");
}
- printk("\n");
+ pr_cont("\n");
/* First check to see if an EEPROM is attached. */
@@ -542,9 +543,8 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
dev->dev_addr[i * 2] = eeprom_buff[i];
dev->dev_addr[i * 2 + 1] = eeprom_buff[i] >> 8;
}
- if (net_debug > 1)
- pr_debug("%s: new adapter_cnf: 0x%x\n",
- dev->name, lp->adapter_cnf);
+ cs89_dbg(1, debug, "%s: new adapter_cnf: 0x%x\n",
+ dev->name, lp->adapter_cnf);
}
/* allow them to force multiple transceivers. If they force multiple, autosense */
@@ -572,9 +572,8 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
lp->adapter_cnf |= A_CNF_MEDIA_10B_2;
}
- if (net_debug > 1)
- pr_debug("%s: after force 0x%x, adapter_cnf=0x%x\n",
- dev->name, lp->force, lp->adapter_cnf);
+ cs89_dbg(1, debug, "%s: after force 0x%x, adapter_cnf=0x%x\n",
+ dev->name, lp->force, lp->adapter_cnf);
/* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
@@ -629,24 +628,23 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
dev->irq = i;
}
- printk(" IRQ %d", dev->irq);
+ pr_cont(" IRQ %d", dev->irq);
#if ALLOW_DMA
if (lp->use_dma) {
get_dma_channel(dev);
- printk(", DMA %d", dev->dma);
+ pr_cont(", DMA %d", dev->dma);
} else
#endif
- printk(", programmed I/O");
+ pr_cont(", programmed I/O");
/* print the ethernet address. */
- printk(", MAC %pM\n", dev->dev_addr);
+ pr_cont(", MAC %pM\n", dev->dev_addr);
dev->netdev_ops = &net_ops;
dev->watchdog_timeo = HZ;
- if (net_debug)
- printk("cs89x0_probe1() successful\n");
+ cs89_dbg(0, info, "cs89x0_probe1() successful\n");
retval = register_netdev(dev);
if (retval)
@@ -693,8 +691,7 @@ cs89x0_ioport_probe(struct net_device *dev, unsigned long ioport, int modular)
* will skip the test for the ADD_PORT.
*/
if (ioport & 1) {
- if (net_debug > 1)
- pr_info("%s: odd ioaddr 0x%lx\n", dev->name, ioport);
+ cs89_dbg(1, info, "%s: odd ioaddr 0x%lx\n", dev->name, ioport);
if ((ioport & 2) != 2) {
if ((ioread16(io_mem + ADD_PORT) & ADD_MASK) !=
ADD_SIG) {
@@ -742,8 +739,7 @@ struct net_device * __init cs89x0_probe(int unit)
io = dev->base_addr;
irq = dev->irq;
- if (net_debug)
- pr_info("cs89x0_probe(0x%x)\n", io);
+ cs89_dbg(0, info, "cs89x0_probe(0x%x)\n", io);
if (io > 0x1ff) { /* Check a single specified location. */
err = cs89x0_ioport_probe(dev, io, 0);
@@ -817,18 +813,15 @@ set_dma_cfg(struct net_device *dev)
if (lp->use_dma) {
if ((lp->isa_config & ANY_ISA_DMA) == 0) {
- if (net_debug > 3)
- printk("set_dma_cfg(): no DMA\n");
+ cs89_dbg(3, err, "set_dma_cfg(): no DMA\n");
return;
}
if (lp->isa_config & ISA_RxDMA) {
lp->curr_rx_cfg |= RX_DMA_ONLY;
- if (net_debug > 3)
- printk("set_dma_cfg(): RX_DMA_ONLY\n");
+ cs89_dbg(3, info, "set_dma_cfg(): RX_DMA_ONLY\n");
} else {
lp->curr_rx_cfg |= AUTO_RX_DMA; /* not that we support it... */
- if (net_debug > 3)
- printk("set_dma_cfg(): AUTO_RX_DMA\n");
+ cs89_dbg(3, info, "set_dma_cfg(): AUTO_RX_DMA\n");
}
}
}
@@ -871,10 +864,10 @@ dma_rx(struct net_device *dev)
status = bp[0] + (bp[1] << 8);
length = bp[2] + (bp[3] << 8);
bp += 4;
- if (net_debug > 5) {
- printk("%s: receiving DMA packet at %lx, status %x, length %x\n",
- dev->name, (unsigned long)bp, status, length);
- }
+
+ cs89_dbg(5, debug, "%s: receiving DMA packet at %lx, status %x, length %x\n",
+ dev->name, (unsigned long)bp, status, length);
+
if ((status & RX_OK) == 0) {
count_rx_errors(status, dev);
goto skip_this_frame;
@@ -883,9 +876,9 @@ dma_rx(struct net_device *dev)
/* Malloc up new buffer. */
skb = netdev_alloc_skb(dev, length + 2);
if (skb == NULL) {
- if (net_debug) /* I don't think we want to do this to a stressed system */
- printk("%s: Memory squeeze, dropping packet\n",
- dev->name);
+ /* I don't think we want to do this to a stressed system */
+ cs89_dbg(0, err, "%s: Memory squeeze, dropping packet\n",
+ dev->name);
dev->stats.rx_dropped++;
/* AKPM: advance bp to the next frame */
@@ -911,12 +904,11 @@ skip_this_frame:
bp -= lp->dmasize*1024;
lp->rx_dma_ptr = bp;
- if (net_debug > 3) {
- printk("%s: received %d byte DMA packet of type %x\n",
- dev->name, length,
- ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
- skb->data[ETH_ALEN + ETH_ALEN + 1]));
- }
+ cs89_dbg(3, info, "%s: received %d byte DMA packet of type %x\n",
+ dev->name, length,
+ ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]));
+
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->stats.rx_packets++;
@@ -998,8 +990,7 @@ detect_tp(struct net_device *dev)
int timenow = jiffies;
int fdx;
- if (net_debug > 1)
- printk("%s: Attempting TP\n", dev->name);
+ cs89_dbg(1, debug, "%s: Attempting TP\n", dev->name);
/* If connected to another full duplex capable 10-Base-T card
* the link pulses seem to be lost when the auto detect bit in
@@ -1023,7 +1014,8 @@ detect_tp(struct net_device *dev)
switch (lp->force & 0xf0) {
#if 0
case FORCE_AUTO:
- printk("%s: cs8900 doesn't autonegotiate\n", dev->name);
+ pr_info("%s: cs8900 doesn't autonegotiate\n",
+ dev->name);
return DETECTED_NONE;
#endif
/* CS8900 doesn't support AUTO, change to HALF*/
@@ -1102,18 +1094,15 @@ send_test_pkt(struct net_device *dev)
/* Write the contents of the packet */
writewords(lp, TX_FRAME_PORT, test_packet, (ETH_ZLEN + 1) >> 1);
- if (net_debug > 1)
- printk("Sending test packet ");
+ cs89_dbg(1, debug, "Sending test packet ");
/* wait a couple of jiffies for packet to be received */
for (timenow = jiffies; jiffies - timenow < 3;)
;
if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
- if (net_debug > 1)
- printk("succeeded\n");
+ cs89_dbg(1, cont, "succeeded\n");
return 1;
}
- if (net_debug > 1)
- printk("failed\n");
+ cs89_dbg(1, cont, "failed\n");
return 0;
}
@@ -1123,8 +1112,7 @@ detect_aui(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
- if (net_debug > 1)
- printk("%s: Attempting AUI\n", dev->name);
+ cs89_dbg(1, debug, "%s: Attempting AUI\n", dev->name);
control_dc_dc(dev, 0);
writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
@@ -1140,8 +1128,7 @@ detect_bnc(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
- if (net_debug > 1)
- printk("%s: Attempting BNC\n", dev->name);
+ cs89_dbg(1, debug, "%s: Attempting BNC\n", dev->name);
control_dc_dc(dev, 1);
writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
@@ -1255,12 +1242,10 @@ net_open(struct net_device *dev)
dev->name, lp->dmasize);
goto release_irq;
}
- if (net_debug > 1) {
- printk("%s: dma %lx %lx\n",
- dev->name,
- (unsigned long)lp->dma_buff,
- (unsigned long)isa_virt_to_bus(lp->dma_buff));
- }
+ cs89_dbg(1, debug, "%s: dma %lx %lx\n",
+ dev->name,
+ (unsigned long)lp->dma_buff,
+ (unsigned long)isa_virt_to_bus(lp->dma_buff));
if ((unsigned long)lp->dma_buff >= MAX_DMA_ADDRESS ||
!dma_page_eq(lp->dma_buff,
lp->dma_buff + lp->dmasize * 1024 - 1)) {
@@ -1442,8 +1427,7 @@ release_irq:
#endif
));
netif_start_queue(dev);
- if (net_debug > 1)
- printk("cs89x0: net_open() succeeded\n");
+ cs89_dbg(1, debug, "net_open() succeeded\n");
return 0;
bad_out:
return ret;
@@ -1453,10 +1437,9 @@ static void net_timeout(struct net_device *dev)
{
/* If we get here, some higher level has decided we are broken.
There should really be a "kick me" function call instead. */
- if (net_debug > 0)
- printk("%s: transmit timed out, %s?\n",
- dev->name,
- tx_done(dev) ? "IRQ conflict" : "network cable problem");
+ cs89_dbg(0, err, "%s: transmit timed out, %s?\n",
+ dev->name,
+ tx_done(dev) ? "IRQ conflict" : "network cable problem");
/* Try to restart the adaptor. */
netif_wake_queue(dev);
}
@@ -1466,12 +1449,10 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev)
struct net_local *lp = netdev_priv(dev);
unsigned long flags;
- if (net_debug > 3) {
- printk("%s: sent %d byte packet of type %x\n",
- dev->name, skb->len,
- ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
- skb->data[ETH_ALEN + ETH_ALEN + 1]));
- }
+ cs89_dbg(3, debug, "%s: sent %d byte packet of type %x\n",
+ dev->name, skb->len,
+ ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]));
/* keep the upload from being interrupted, since we
* ask the chip to start transmitting before the
@@ -1492,8 +1473,7 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev)
*/
spin_unlock_irqrestore(&lp->lock, flags);
- if (net_debug)
- printk("cs89x0: Tx buffer not free!\n");
+ cs89_dbg(0, err, "Tx buffer not free!\n");
return NETDEV_TX_BUSY;
}
/* Write the contents of the packet */
@@ -1537,8 +1517,7 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
* vista, baby!
*/
while ((status = ioread16(lp->virt_addr + ISQ_PORT))) {
- if (net_debug > 4)
- printk("%s: event=%04x\n", dev->name, status);
+ cs89_dbg(4, debug, "%s: event=%04x\n", dev->name, status);
handled = 1;
switch (status & ISQ_EVENT_MASK) {
case ISQ_RECEIVER_EVENT:
@@ -1576,9 +1555,8 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
netif_wake_queue(dev); /* Inform upper layers. */
}
if (status & TX_UNDERRUN) {
- if (net_debug > 0)
- printk("%s: transmit underrun\n",
- dev->name);
+ cs89_dbg(0, err, "%s: transmit underrun\n",
+ dev->name);
lp->send_underrun++;
if (lp->send_underrun == 3)
lp->send_cmd = TX_AFTER_381;
@@ -1596,18 +1574,20 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
if (lp->use_dma && (status & RX_DMA)) {
int count = readreg(dev, PP_DmaFrameCnt);
while (count) {
- if (net_debug > 5)
- printk("%s: receiving %d DMA frames\n",
- dev->name, count);
- if (net_debug > 2 && count > 1)
- printk("%s: receiving %d DMA frames\n",
- dev->name, count);
+ cs89_dbg(5, debug,
+ "%s: receiving %d DMA frames\n",
+ dev->name, count);
+ if (count > 1)
+ cs89_dbg(2, debug,
+ "%s: receiving %d DMA frames\n",
+ dev->name, count);
dma_rx(dev);
if (--count == 0)
count = readreg(dev, PP_DmaFrameCnt);
- if (net_debug > 2 && count > 0)
- printk("%s: continuing with %d DMA frames\n",
- dev->name, count);
+ if (count > 0)
+ cs89_dbg(2, debug,
+ "%s: continuing with %d DMA frames\n",
+ dev->name, count);
}
}
#endif
@@ -1669,12 +1649,10 @@ net_rx(struct net_device *dev)
if (length & 1)
skb->data[length-1] = ioread16(lp->virt_addr + RX_FRAME_PORT);
- if (net_debug > 3) {
- printk("%s: received %d byte packet of type %x\n",
- dev->name, length,
- (skb->data[ETH_ALEN + ETH_ALEN] << 8) |
- skb->data[ETH_ALEN + ETH_ALEN + 1]);
- }
+ cs89_dbg(3, debug, "%s: received %d byte packet of type %x\n",
+ dev->name, length,
+ (skb->data[ETH_ALEN + ETH_ALEN] << 8) |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
@@ -1778,9 +1756,8 @@ static int set_mac_address(struct net_device *dev, void *p)
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
- if (net_debug)
- printk("%s: Setting MAC address to %pM\n",
- dev->name, dev->dev_addr);
+ cs89_dbg(0, debug, "%s: Setting MAC address to %pM\n",
+ dev->name, dev->dev_addr);
/* set the Ethernet address */
for (i = 0; i < ETH_ALEN / 2; i++)
--
1.7.8.111.gad25c.dirty
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH net-next 5/5] cirrus: cs89x0: Remove function prototypes and reorder declarations
2012-05-18 22:56 [PATCH net-next 0/5] cirrus: cs89x0: Neatening Joe Perches
` (3 preceding siblings ...)
2012-05-18 22:56 ` [PATCH net-next 4/5] cirrus: cs89x0: Neaten debugging and logging Joe Perches
@ 2012-05-18 22:56 ` Joe Perches
2012-05-19 3:53 ` [PATCH net-next 0/5] cirrus: cs89x0: Neatening David Miller
5 siblings, 0 replies; 7+ messages in thread
From: Joe Perches @ 2012-05-18 22:56 UTC (permalink / raw)
To: netdev, linux-kernel; +Cc: Jaccon Bastiaansen
Move blocks of code around to avoid function prototypes.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/ethernet/cirrus/cs89x0.c | 1919 +++++++++++++++++-----------------
1 files changed, 947 insertions(+), 972 deletions(-)
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index 859f8be..845b202 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -174,28 +174,6 @@ struct net_local {
#endif
};
-/* Index to functions, as function prototypes. */
-static int net_open(struct net_device *dev);
-static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t net_interrupt(int irq, void *dev_id);
-static void set_multicast_list(struct net_device *dev);
-static void net_timeout(struct net_device *dev);
-static void net_rx(struct net_device *dev);
-static int net_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static void reset_chip(struct net_device *dev);
-static int get_eeprom_data(struct net_device *dev, int off, int len, int *buffer);
-static int get_eeprom_cksum(int off, int len, int *buffer);
-static int set_mac_address(struct net_device *dev, void *addr);
-static void count_rx_errors(int status, struct net_device *dev);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void net_poll_controller(struct net_device *dev);
-#endif
-#if ALLOW_DMA
-static void get_dma_channel(struct net_device *dev);
-static void release_dma_buff(struct net_local *lp);
-#endif
-
/* Example routines you must write ;->. */
#define tx_done(dev) 1
@@ -321,7 +299,7 @@ get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
{
int i;
- cs89_dbg(3, info, "EEPROM data from %x for %x:\n", off, len);
+ cs89_dbg(3, info, "EEPROM data from %x for %x:", off, len);
for (i = 0; i < len; i++) {
if (wait_eeprom_ready(dev) < 0)
return -1;
@@ -330,7 +308,7 @@ get_eeprom_data(struct net_device *dev, int off, int len, int *buffer)
if (wait_eeprom_ready(dev) < 0)
return -1;
buffer[i] = readreg(dev, PP_EEData);
- cs89_dbg(3, cont, "%04x ", buffer[i]);
+ cs89_dbg(3, cont, " %04x", buffer[i]);
}
cs89_dbg(3, cont, "\n");
return 0;
@@ -350,564 +328,425 @@ get_eeprom_cksum(int off, int len, int *buffer)
return -1;
}
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling receive - used by netconsole and other diagnostic tools
- * to allow network i/o with interrupts disabled.
- */
-static void net_poll_controller(struct net_device *dev)
+static void
+write_irq(struct net_device *dev, int chip_type, int irq)
{
- disable_irq(dev->irq);
- net_interrupt(dev->irq, dev);
- enable_irq(dev->irq);
-}
-#endif
+ int i;
-static const struct net_device_ops net_ops = {
- .ndo_open = net_open,
- .ndo_stop = net_close,
- .ndo_tx_timeout = net_timeout,
- .ndo_start_xmit = net_send_packet,
- .ndo_get_stats = net_get_stats,
- .ndo_set_rx_mode = set_multicast_list,
- .ndo_set_mac_address = set_mac_address,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = net_poll_controller,
+ if (chip_type == CS8900) {
+#ifndef CONFIG_CS89x0_PLATFORM
+ /* Search the mapping table for the corresponding IRQ pin. */
+ for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++)
+ if (cs8900_irq_map[i] == irq)
+ break;
+ /* Not found */
+ if (i == ARRAY_SIZE(cs8900_irq_map))
+ i = 3;
+#else
+ /* INTRQ0 pin is used for interrupt generation. */
+ i = 0;
#endif
- .ndo_change_mtu = eth_change_mtu,
- .ndo_validate_addr = eth_validate_addr,
-};
+ writereg(dev, PP_CS8900_ISAINT, i);
+ } else {
+ writereg(dev, PP_CS8920_ISAINT, irq);
+ }
+}
-/* This is the real probe routine.
- * Linux has a history of friendly device probes on the ISA bus.
- * A good device probes avoids doing writes, and
- * verifies that the correct device exists and functions.
- * Return 0 on success.
- */
-static int __init
-cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
+static void
+count_rx_errors(int status, struct net_device *dev)
{
- struct net_local *lp = netdev_priv(dev);
- int i;
- int tmp;
- unsigned rev_type = 0;
- int eeprom_buff[CHKSUM_LEN];
- int retval;
+ dev->stats.rx_errors++;
+ if (status & RX_RUNT)
+ dev->stats.rx_length_errors++;
+ if (status & RX_EXTRA_DATA)
+ dev->stats.rx_length_errors++;
+ if ((status & RX_CRC_ERROR) && !(status & (RX_EXTRA_DATA | RX_RUNT)))
+ /* per str 172 */
+ dev->stats.rx_crc_errors++;
+ if (status & RX_DRIBBLE)
+ dev->stats.rx_frame_errors++;
+}
+
+/*********************************
+ * This page contains DMA routines
+ *********************************/
- /* Initialize the device structure. */
- if (!modular) {
- memset(lp, 0, sizeof(*lp));
- spin_lock_init(&lp->lock);
-#ifndef MODULE
#if ALLOW_DMA
- if (g_cs89x0_dma) {
- lp->use_dma = 1;
- lp->dma = g_cs89x0_dma;
- lp->dmasize = 16; /* Could make this an option... */
+
+#define dma_page_eq(ptr1, ptr2) ((long)(ptr1) >> 17 == (long)(ptr2) >> 17)
+
+static void
+get_dma_channel(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+
+ if (lp->dma) {
+ dev->dma = lp->dma;
+ lp->isa_config |= ISA_RxDMA;
+ } else {
+ if ((lp->isa_config & ANY_ISA_DMA) == 0)
+ return;
+ dev->dma = lp->isa_config & DMA_NO_MASK;
+ if (lp->chip_type == CS8900)
+ dev->dma += 5;
+ if (dev->dma < 5 || dev->dma > 7) {
+ lp->isa_config &= ~ANY_ISA_DMA;
+ return;
}
-#endif
- lp->force = g_cs89x0_media__force;
-#endif
}
+}
- pr_debug("PP_addr at %p[%x]: 0x%x\n",
- ioaddr, ADD_PORT, ioread16(ioaddr + ADD_PORT));
- iowrite16(PP_ChipID, ioaddr + ADD_PORT);
+static void
+write_dma(struct net_device *dev, int chip_type, int dma)
+{
+ struct net_local *lp = netdev_priv(dev);
+ if ((lp->isa_config & ANY_ISA_DMA) == 0)
+ return;
+ if (chip_type == CS8900)
+ writereg(dev, PP_CS8900_ISADMA, dma - 5);
+ else
+ writereg(dev, PP_CS8920_ISADMA, dma);
+}
- tmp = ioread16(ioaddr + DATA_PORT);
- if (tmp != CHIP_EISA_ID_SIG) {
- pr_debug("%s: incorrect signature at %p[%x]: 0x%x!="
- CHIP_EISA_ID_SIG_STR "\n",
- dev->name, ioaddr, DATA_PORT, tmp);
- retval = -ENODEV;
- goto out1;
- }
+static void
+set_dma_cfg(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
- lp->virt_addr = ioaddr;
+ if (lp->use_dma) {
+ if ((lp->isa_config & ANY_ISA_DMA) == 0) {
+ cs89_dbg(3, err, "set_dma_cfg(): no DMA\n");
+ return;
+ }
+ if (lp->isa_config & ISA_RxDMA) {
+ lp->curr_rx_cfg |= RX_DMA_ONLY;
+ cs89_dbg(3, info, "set_dma_cfg(): RX_DMA_ONLY\n");
+ } else {
+ lp->curr_rx_cfg |= AUTO_RX_DMA; /* not that we support it... */
+ cs89_dbg(3, info, "set_dma_cfg(): AUTO_RX_DMA\n");
+ }
+ }
+}
- /* get the chip type */
- rev_type = readreg(dev, PRODUCT_ID_ADD);
- lp->chip_type = rev_type & ~REVISON_BITS;
- lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
+static int
+dma_bufcfg(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ if (lp->use_dma)
+ return (lp->isa_config & ANY_ISA_DMA) ? RX_DMA_ENBL : 0;
+ else
+ return 0;
+}
- /* Check the chip type and revision in order to set the correct send command
- CS8920 revision C and CS8900 revision F can use the faster send. */
- lp->send_cmd = TX_AFTER_381;
- if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
- lp->send_cmd = TX_NOW;
- if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
- lp->send_cmd = TX_NOW;
+static int
+dma_busctl(struct net_device *dev)
+{
+ int retval = 0;
+ struct net_local *lp = netdev_priv(dev);
+ if (lp->use_dma) {
+ if (lp->isa_config & ANY_ISA_DMA)
+ retval |= RESET_RX_DMA; /* Reset the DMA pointer */
+ if (lp->isa_config & DMA_BURST)
+ retval |= DMA_BURST_MODE; /* Does ISA config specify DMA burst ? */
+ if (lp->dmasize == 64)
+ retval |= RX_DMA_SIZE_64K; /* did they ask for 64K? */
+ retval |= MEMORY_ON; /* we need memory enabled to use DMA. */
+ }
+ return retval;
+}
- pr_info_once("%s\n", version);
+static void
+dma_rx(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ struct sk_buff *skb;
+ int status, length;
+ unsigned char *bp = lp->rx_dma_ptr;
- pr_info("%s: cs89%c0%s rev %c found at %p ",
- dev->name,
- lp->chip_type == CS8900 ? '0' : '2',
- lp->chip_type == CS8920M ? "M" : "",
- lp->chip_revision,
- lp->virt_addr);
+ status = bp[0] + (bp[1] << 8);
+ length = bp[2] + (bp[3] << 8);
+ bp += 4;
- reset_chip(dev);
+ cs89_dbg(5, debug, "%s: receiving DMA packet at %lx, status %x, length %x\n",
+ dev->name, (unsigned long)bp, status, length);
- /* Here we read the current configuration of the chip.
- * If there is no Extended EEPROM then the idea is to not disturb
- * the chip configuration, it should have been correctly setup by
- * automatic EEPROM read on reset. So, if the chip says it read
- * the EEPROM the driver will always do *something* instead of
- * complain that adapter_cnf is 0.
- */
+ if ((status & RX_OK) == 0) {
+ count_rx_errors(status, dev);
+ goto skip_this_frame;
+ }
- if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
- (EEPROM_OK | EEPROM_PRESENT)) {
- /* Load the MAC. */
- for (i = 0; i < ETH_ALEN / 2; i++) {
- unsigned int Addr;
- Addr = readreg(dev, PP_IA + i * 2);
- dev->dev_addr[i * 2] = Addr & 0xFF;
- dev->dev_addr[i * 2 + 1] = Addr >> 8;
- }
+ /* Malloc up new buffer. */
+ skb = netdev_alloc_skb(dev, length + 2);
+ if (skb == NULL) {
+ /* I don't think we want to do this to a stressed system */
+ cs89_dbg(0, err, "%s: Memory squeeze, dropping packet\n",
+ dev->name);
+ dev->stats.rx_dropped++;
- /* Load the Adapter Configuration.
- * Note: Barring any more specific information from some
- * other source (ie EEPROM+Schematics), we would not know
- * how to operate a 10Base2 interface on the AUI port.
- * However, since we do read the status of HCB1 and use
- * settings that always result in calls to control_dc_dc(dev,0)
- * a BNC interface should work if the enable pin
- * (dc/dc converter) is on HCB1.
- * It will be called AUI however.
- */
-
- lp->adapter_cnf = 0;
- i = readreg(dev, PP_LineCTL);
- /* Preserve the setting of the HCB1 pin. */
- if ((i & (HCB1 | HCB1_ENBL)) == (HCB1 | HCB1_ENBL))
- lp->adapter_cnf |= A_CNF_DC_DC_POLARITY;
- /* Save the sqelch bit */
- if ((i & LOW_RX_SQUELCH) == LOW_RX_SQUELCH)
- lp->adapter_cnf |= A_CNF_EXTND_10B_2 | A_CNF_LOW_RX_SQUELCH;
- /* Check if the card is in 10Base-t only mode */
- if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == 0)
- lp->adapter_cnf |= A_CNF_10B_T | A_CNF_MEDIA_10B_T;
- /* Check if the card is in AUI only mode */
- if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUI_ONLY)
- lp->adapter_cnf |= A_CNF_AUI | A_CNF_MEDIA_AUI;
- /* Check if the card is in Auto mode. */
- if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUTO_AUI_10BASET)
- lp->adapter_cnf |= A_CNF_AUI | A_CNF_10B_T |
- A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;
-
- cs89_dbg(1, info, "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
- dev->name, i, lp->adapter_cnf);
-
- /* IRQ. Other chips already probe, see below. */
- if (lp->chip_type == CS8900)
- lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK;
-
- pr_cont("[Cirrus EEPROM] ");
- }
-
- pr_cont("\n");
-
- /* First check to see if an EEPROM is attached. */
-
- if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
- pr_warn("No EEPROM, relying on command line....\n");
- else if (get_eeprom_data(dev, START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) {
- pr_warn("EEPROM read failed, relying on command line\n");
- } else if (get_eeprom_cksum(START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) {
- /* Check if the chip was able to read its own configuration starting
- at 0 in the EEPROM*/
- if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) !=
- (EEPROM_OK | EEPROM_PRESENT))
- pr_warn("Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
+ /* AKPM: advance bp to the next frame */
+skip_this_frame:
+ bp += (length + 3) & ~3;
+ if (bp >= lp->end_dma_buff)
+ bp -= lp->dmasize * 1024;
+ lp->rx_dma_ptr = bp;
+ return;
+ }
+ skb_reserve(skb, 2); /* longword align L3 header */
+ if (bp + length > lp->end_dma_buff) {
+ int semi_cnt = lp->end_dma_buff - bp;
+ memcpy(skb_put(skb, semi_cnt), bp, semi_cnt);
+ memcpy(skb_put(skb, length - semi_cnt), lp->dma_buff,
+ length - semi_cnt);
} else {
- /* This reads an extended EEPROM that is not documented
- * in the CS8900 datasheet.
- */
-
- /* get transmission control word but keep the autonegotiation bits */
- if (!lp->auto_neg_cnf)
- lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET / 2];
- /* Store adapter configuration */
- if (!lp->adapter_cnf)
- lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET / 2];
- /* Store ISA configuration */
- lp->isa_config = eeprom_buff[ISA_CNF_OFFSET / 2];
- dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET / 2] << 8;
-
- /* eeprom_buff has 32-bit ints, so we can't just memcpy it */
- /* store the initial memory base address */
- for (i = 0; i < ETH_ALEN / 2; i++) {
- dev->dev_addr[i * 2] = eeprom_buff[i];
- dev->dev_addr[i * 2 + 1] = eeprom_buff[i] >> 8;
- }
- cs89_dbg(1, debug, "%s: new adapter_cnf: 0x%x\n",
- dev->name, lp->adapter_cnf);
+ memcpy(skb_put(skb, length), bp, length);
}
+ bp += (length + 3) & ~3;
+ if (bp >= lp->end_dma_buff)
+ bp -= lp->dmasize*1024;
+ lp->rx_dma_ptr = bp;
- /* allow them to force multiple transceivers. If they force multiple, autosense */
- {
- int count = 0;
- if (lp->force & FORCE_RJ45) {
- lp->adapter_cnf |= A_CNF_10B_T;
- count++;
- }
- if (lp->force & FORCE_AUI) {
- lp->adapter_cnf |= A_CNF_AUI;
- count++;
- }
- if (lp->force & FORCE_BNC) {
- lp->adapter_cnf |= A_CNF_10B_2;
- count++;
- }
- if (count > 1)
- lp->adapter_cnf |= A_CNF_MEDIA_AUTO;
- else if (lp->force & FORCE_RJ45)
- lp->adapter_cnf |= A_CNF_MEDIA_10B_T;
- else if (lp->force & FORCE_AUI)
- lp->adapter_cnf |= A_CNF_MEDIA_AUI;
- else if (lp->force & FORCE_BNC)
- lp->adapter_cnf |= A_CNF_MEDIA_10B_2;
- }
+ cs89_dbg(3, info, "%s: received %d byte DMA packet of type %x\n",
+ dev->name, length,
+ ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]));
- cs89_dbg(1, debug, "%s: after force 0x%x, adapter_cnf=0x%x\n",
- dev->name, lp->force, lp->adapter_cnf);
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += length;
+}
- /* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
+static void release_dma_buff(struct net_local *lp)
+{
+ if (lp->dma_buff) {
+ free_pages((unsigned long)(lp->dma_buff),
+ get_order(lp->dmasize * 1024));
+ lp->dma_buff = NULL;
+ }
+}
- /* FIXME: We don't let you set the IMM bit from the command line: add it to lp->auto_neg_cnf here */
+#endif /* ALLOW_DMA */
- /* FIXME: we don't set the Ethernet address on the command line. Use
- * ifconfig IFACE hw ether AABBCCDDEEFF
+static void
+control_dc_dc(struct net_device *dev, int on_not_off)
+{
+ struct net_local *lp = netdev_priv(dev);
+ unsigned int selfcontrol;
+ int timenow = jiffies;
+ /* control the DC to DC convertor in the SelfControl register.
+ * Note: This is hooked up to a general purpose pin, might not
+ * always be a DC to DC convertor.
*/
- pr_info("media %s%s%s",
- (lp->adapter_cnf & A_CNF_10B_T) ? "RJ-45," : "",
- (lp->adapter_cnf & A_CNF_AUI) ? "AUI," : "",
- (lp->adapter_cnf & A_CNF_10B_2) ? "BNC," : "");
-
- lp->irq_map = 0xffff;
-
- /* If this is a CS8900 then no pnp soft */
- if (lp->chip_type != CS8900 &&
- /* Check if the ISA IRQ has been set */
- (i = readreg(dev, PP_CS8920_ISAINT) & 0xff,
- (i != 0 && i < CS8920_NO_INTS))) {
- if (!dev->irq)
- dev->irq = i;
- } else {
- i = lp->isa_config & INT_NO_MASK;
-#ifndef CONFIG_CS89x0_PLATFORM
- if (lp->chip_type == CS8900) {
-#ifdef CS89x0_NONISA_IRQ
- i = cs8900_irq_map[0];
-#else
- /* Translate the IRQ using the IRQ mapping table. */
- if (i >= ARRAY_SIZE(cs8900_irq_map))
- pr_err("invalid ISA interrupt number %d\n", i);
- else
- i = cs8900_irq_map[i];
+ selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */
+ if (((lp->adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off)
+ selfcontrol |= HCB1;
+ else
+ selfcontrol &= ~HCB1;
+ writereg(dev, PP_SelfCTL, selfcontrol);
- lp->irq_map = CS8900_IRQ_MAP; /* fixed IRQ map for CS8900 */
- } else {
- int irq_map_buff[IRQ_MAP_LEN/2];
+ /* Wait for the DC/DC converter to power up - 500ms */
+ while (jiffies - timenow < HZ)
+ ;
+}
- if (get_eeprom_data(dev, IRQ_MAP_EEPROM_DATA,
- IRQ_MAP_LEN / 2,
- irq_map_buff) >= 0) {
- if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT)
- lp->irq_map = ((irq_map_buff[0] >> 8) |
- (irq_map_buff[1] << 8));
- }
-#endif
- }
-#endif
- if (!dev->irq)
- dev->irq = i;
- }
+/* send a test packet - return true if carrier bits are ok */
+static int
+send_test_pkt(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ char test_packet[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 46, /* A 46 in network order */
+ 0, 0, /* DSAP=0 & SSAP=0 fields */
+ 0xf3, 0 /* Control (Test Req + P bit set) */
+ };
+ long timenow = jiffies;
- pr_cont(" IRQ %d", dev->irq);
+ writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON);
-#if ALLOW_DMA
- if (lp->use_dma) {
- get_dma_channel(dev);
- pr_cont(", DMA %d", dev->dma);
- } else
-#endif
- pr_cont(", programmed I/O");
+ memcpy(test_packet, dev->dev_addr, ETH_ALEN);
+ memcpy(test_packet + ETH_ALEN, dev->dev_addr, ETH_ALEN);
- /* print the ethernet address. */
- pr_cont(", MAC %pM\n", dev->dev_addr);
+ iowrite16(TX_AFTER_ALL, lp->virt_addr + TX_CMD_PORT);
+ iowrite16(ETH_ZLEN, lp->virt_addr + TX_LEN_PORT);
- dev->netdev_ops = &net_ops;
- dev->watchdog_timeo = HZ;
+ /* Test to see if the chip has allocated memory for the packet */
+ while (jiffies - timenow < 5)
+ if (readreg(dev, PP_BusST) & READY_FOR_TX_NOW)
+ break;
+ if (jiffies - timenow >= 5)
+ return 0; /* this shouldn't happen */
- cs89_dbg(0, info, "cs89x0_probe1() successful\n");
+ /* Write the contents of the packet */
+ writewords(lp, TX_FRAME_PORT, test_packet, (ETH_ZLEN + 1) >> 1);
- retval = register_netdev(dev);
- if (retval)
- goto out2;
+ cs89_dbg(1, debug, "Sending test packet ");
+ /* wait a couple of jiffies for packet to be received */
+ for (timenow = jiffies; jiffies - timenow < 3;)
+ ;
+ if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
+ cs89_dbg(1, cont, "succeeded\n");
+ return 1;
+ }
+ cs89_dbg(1, cont, "failed\n");
return 0;
-out2:
- iowrite16(PP_ChipID, lp->virt_addr + ADD_PORT);
-out1:
- return retval;
}
-#ifndef CONFIG_CS89x0_PLATFORM
-/*
- * This function converts the I/O port addres used by the cs89x0_probe() and
- * init_module() functions to the I/O memory address used by the
- * cs89x0_probe1() function.
- */
-static int __init
-cs89x0_ioport_probe(struct net_device *dev, unsigned long ioport, int modular)
+#define DETECTED_NONE 0
+#define DETECTED_RJ45H 1
+#define DETECTED_RJ45F 2
+#define DETECTED_AUI 3
+#define DETECTED_BNC 4
+
+static int
+detect_tp(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
- int ret;
- void __iomem *io_mem;
-
- if (!lp)
- return -ENOMEM;
-
- dev->base_addr = ioport;
-
- if (!request_region(ioport, NETCARD_IO_EXTENT, DRV_NAME)) {
- ret = -EBUSY;
- goto out;
- }
+ int timenow = jiffies;
+ int fdx;
- io_mem = ioport_map(ioport & ~3, NETCARD_IO_EXTENT);
- if (!io_mem) {
- ret = -ENOMEM;
- goto release;
- }
+ cs89_dbg(1, debug, "%s: Attempting TP\n", dev->name);
- /* if they give us an odd I/O address, then do ONE write to
- * the address port, to get it back to address zero, where we
- * expect to find the EISA signature word. An IO with a base of 0x3
- * will skip the test for the ADD_PORT.
+ /* If connected to another full duplex capable 10-Base-T card
+ * the link pulses seem to be lost when the auto detect bit in
+ * the LineCTL is set. To overcome this the auto detect bit will
+ * be cleared whilst testing the 10-Base-T interface. This would
+ * not be necessary for the sparrow chip but is simpler to do it
+ * anyway.
*/
- if (ioport & 1) {
- cs89_dbg(1, info, "%s: odd ioaddr 0x%lx\n", dev->name, ioport);
- if ((ioport & 2) != 2) {
- if ((ioread16(io_mem + ADD_PORT) & ADD_MASK) !=
- ADD_SIG) {
- pr_err("%s: bad signature 0x%x\n",
- dev->name, ioread16(io_mem + ADD_PORT));
- ret = -ENODEV;
- goto unmap;
- }
- }
- }
-
- ret = cs89x0_probe1(dev, io_mem, modular);
- if (!ret)
- goto out;
-unmap:
- ioport_unmap(io_mem);
-release:
- release_region(ioport, NETCARD_IO_EXTENT);
-out:
- return ret;
-}
-
-#ifndef MODULE
-/* Check for a network adaptor of this type, and return '0' iff one exists.
- * If dev->base_addr == 0, probe all likely locations.
- * If dev->base_addr == 1, always return failure.
- * If dev->base_addr == 2, allocate space for the device and return success
- * (detachable devices only).
- * Return 0 on success.
- */
-
-struct net_device * __init cs89x0_probe(int unit)
-{
- struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
- unsigned *port;
- int err = 0;
- int irq;
- int io;
-
- if (!dev)
- return ERR_PTR(-ENODEV);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- io = dev->base_addr;
- irq = dev->irq;
+ writereg(dev, PP_LineCTL, lp->linectl & ~AUI_ONLY);
+ control_dc_dc(dev, 0);
- cs89_dbg(0, info, "cs89x0_probe(0x%x)\n", io);
+ /* Delay for the hardware to work out if the TP cable is present
+ * - 150ms
+ */
+ for (timenow = jiffies; jiffies - timenow < 15;)
+ ;
+ if ((readreg(dev, PP_LineST) & LINK_OK) == 0)
+ return DETECTED_NONE;
- if (io > 0x1ff) { /* Check a single specified location. */
- err = cs89x0_ioport_probe(dev, io, 0);
- } else if (io != 0) { /* Don't probe at all. */
- err = -ENXIO;
+ if (lp->chip_type == CS8900) {
+ switch (lp->force & 0xf0) {
+#if 0
+ case FORCE_AUTO:
+ pr_info("%s: cs8900 doesn't autonegotiate\n",
+ dev->name);
+ return DETECTED_NONE;
+#endif
+ /* CS8900 doesn't support AUTO, change to HALF*/
+ case FORCE_AUTO:
+ lp->force &= ~FORCE_AUTO;
+ lp->force |= FORCE_HALF;
+ break;
+ case FORCE_HALF:
+ break;
+ case FORCE_FULL:
+ writereg(dev, PP_TestCTL,
+ readreg(dev, PP_TestCTL) | FDX_8900);
+ break;
+ }
+ fdx = readreg(dev, PP_TestCTL) & FDX_8900;
} else {
- for (port = netcard_portlist; *port; port++) {
- if (cs89x0_ioport_probe(dev, *port, 0) == 0)
- break;
- dev->irq = irq;
+ switch (lp->force & 0xf0) {
+ case FORCE_AUTO:
+ lp->auto_neg_cnf = AUTO_NEG_ENABLE;
+ break;
+ case FORCE_HALF:
+ lp->auto_neg_cnf = 0;
+ break;
+ case FORCE_FULL:
+ lp->auto_neg_cnf = RE_NEG_NOW | ALLOW_FDX;
+ break;
}
- if (!*port)
- err = -ENODEV;
- }
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- pr_warn("no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
- return ERR_PTR(err);
-}
-#endif
-#endif
-
-/*********************************
- * This page contains DMA routines
- *********************************/
-
-#if ALLOW_DMA
-
-#define dma_page_eq(ptr1, ptr2) ((long)(ptr1) >> 17 == (long)(ptr2) >> 17)
-static void
-get_dma_channel(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
+ writereg(dev, PP_AutoNegCTL, lp->auto_neg_cnf & AUTO_NEG_MASK);
- if (lp->dma) {
- dev->dma = lp->dma;
- lp->isa_config |= ISA_RxDMA;
- } else {
- if ((lp->isa_config & ANY_ISA_DMA) == 0)
- return;
- dev->dma = lp->isa_config & DMA_NO_MASK;
- if (lp->chip_type == CS8900)
- dev->dma += 5;
- if (dev->dma < 5 || dev->dma > 7) {
- lp->isa_config &= ~ANY_ISA_DMA;
- return;
+ if ((lp->auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) {
+ pr_info("%s: negotiating duplex...\n", dev->name);
+ while (readreg(dev, PP_AutoNegST) & AUTO_NEG_BUSY) {
+ if (jiffies - timenow > 4000) {
+ pr_err("**** Full / half duplex auto-negotiation timed out ****\n");
+ break;
+ }
+ }
}
+ fdx = readreg(dev, PP_AutoNegST) & FDX_ACTIVE;
}
-}
-
-static void
-write_dma(struct net_device *dev, int chip_type, int dma)
-{
- struct net_local *lp = netdev_priv(dev);
- if ((lp->isa_config & ANY_ISA_DMA) == 0)
- return;
- if (chip_type == CS8900)
- writereg(dev, PP_CS8900_ISADMA, dma - 5);
+ if (fdx)
+ return DETECTED_RJ45F;
else
- writereg(dev, PP_CS8920_ISADMA, dma);
+ return DETECTED_RJ45H;
}
-static void
-set_dma_cfg(struct net_device *dev)
+static int
+detect_bnc(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
- if (lp->use_dma) {
- if ((lp->isa_config & ANY_ISA_DMA) == 0) {
- cs89_dbg(3, err, "set_dma_cfg(): no DMA\n");
- return;
- }
- if (lp->isa_config & ISA_RxDMA) {
- lp->curr_rx_cfg |= RX_DMA_ONLY;
- cs89_dbg(3, info, "set_dma_cfg(): RX_DMA_ONLY\n");
- } else {
- lp->curr_rx_cfg |= AUTO_RX_DMA; /* not that we support it... */
- cs89_dbg(3, info, "set_dma_cfg(): AUTO_RX_DMA\n");
- }
- }
-}
+ cs89_dbg(1, debug, "%s: Attempting BNC\n", dev->name);
+ control_dc_dc(dev, 1);
-static int
-dma_bufcfg(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- if (lp->use_dma)
- return (lp->isa_config & ANY_ISA_DMA) ? RX_DMA_ENBL : 0;
+ writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
+
+ if (send_test_pkt(dev))
+ return DETECTED_BNC;
else
- return 0;
+ return DETECTED_NONE;
}
static int
-dma_busctl(struct net_device *dev)
+detect_aui(struct net_device *dev)
{
- int retval = 0;
struct net_local *lp = netdev_priv(dev);
- if (lp->use_dma) {
- if (lp->isa_config & ANY_ISA_DMA)
- retval |= RESET_RX_DMA; /* Reset the DMA pointer */
- if (lp->isa_config & DMA_BURST)
- retval |= DMA_BURST_MODE; /* Does ISA config specify DMA burst ? */
- if (lp->dmasize == 64)
- retval |= RX_DMA_SIZE_64K; /* did they ask for 64K? */
- retval |= MEMORY_ON; /* we need memory enabled to use DMA. */
- }
- return retval;
+
+ cs89_dbg(1, debug, "%s: Attempting AUI\n", dev->name);
+ control_dc_dc(dev, 0);
+
+ writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
+
+ if (send_test_pkt(dev))
+ return DETECTED_AUI;
+ else
+ return DETECTED_NONE;
}
+/* We have a good packet(s), get it/them out of the buffers. */
static void
-dma_rx(struct net_device *dev)
+net_rx(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
struct sk_buff *skb;
int status, length;
- unsigned char *bp = lp->rx_dma_ptr;
-
- status = bp[0] + (bp[1] << 8);
- length = bp[2] + (bp[3] << 8);
- bp += 4;
- cs89_dbg(5, debug, "%s: receiving DMA packet at %lx, status %x, length %x\n",
- dev->name, (unsigned long)bp, status, length);
+ status = ioread16(lp->virt_addr + RX_FRAME_PORT);
+ length = ioread16(lp->virt_addr + RX_FRAME_PORT);
if ((status & RX_OK) == 0) {
count_rx_errors(status, dev);
- goto skip_this_frame;
+ return;
}
/* Malloc up new buffer. */
skb = netdev_alloc_skb(dev, length + 2);
if (skb == NULL) {
- /* I don't think we want to do this to a stressed system */
- cs89_dbg(0, err, "%s: Memory squeeze, dropping packet\n",
- dev->name);
+#if 0 /* Again, this seems a cruel thing to do */
+ pr_warn("%s: Memory squeeze, dropping packet\n", dev->name);
+#endif
dev->stats.rx_dropped++;
-
- /* AKPM: advance bp to the next frame */
-skip_this_frame:
- bp += (length + 3) & ~3;
- if (bp >= lp->end_dma_buff)
- bp -= lp->dmasize * 1024;
- lp->rx_dma_ptr = bp;
return;
}
skb_reserve(skb, 2); /* longword align L3 header */
- if (bp + length > lp->end_dma_buff) {
- int semi_cnt = lp->end_dma_buff - bp;
- memcpy(skb_put(skb, semi_cnt), bp, semi_cnt);
- memcpy(skb_put(skb, length - semi_cnt), lp->dma_buff,
- length - semi_cnt);
- } else {
- memcpy(skb_put(skb, length), bp, length);
- }
- bp += (length + 3) & ~3;
- if (bp >= lp->end_dma_buff)
- bp -= lp->dmasize*1024;
- lp->rx_dma_ptr = bp;
+ readwords(lp, RX_FRAME_PORT, skb_put(skb, length), length >> 1);
+ if (length & 1)
+ skb->data[length-1] = ioread16(lp->virt_addr + RX_FRAME_PORT);
- cs89_dbg(3, info, "%s: received %d byte DMA packet of type %x\n",
+ cs89_dbg(3, debug, "%s: received %d byte packet of type %x\n",
dev->name, length,
- ((skb->data[ETH_ALEN + ETH_ALEN] << 8) |
- skb->data[ETH_ALEN + ETH_ALEN + 1]));
+ (skb->data[ETH_ALEN + ETH_ALEN] << 8) |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
@@ -915,278 +754,137 @@ skip_this_frame:
dev->stats.rx_bytes += length;
}
-#endif /* ALLOW_DMA */
+/* The typical workload of the driver:
+ * Handle the network interface interrupts.
+ */
-static void __init reset_chip(struct net_device *dev)
+static irqreturn_t net_interrupt(int irq, void *dev_id)
{
-#if !defined(CONFIG_MACH_MX31ADS)
-#if !defined(CS89x0_NONISA_IRQ)
- struct net_local *lp = netdev_priv(dev);
-#endif /* CS89x0_NONISA_IRQ */
- int reset_start_time;
-
- writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
-
- /* wait 30 ms */
- msleep(30);
+ struct net_device *dev = dev_id;
+ struct net_local *lp;
+ int status;
+ int handled = 0;
-#if !defined(CS89x0_NONISA_IRQ)
- if (lp->chip_type != CS8900) {
- /* Hardware problem requires PNP registers to be reconfigured after a reset */
- iowrite16(PP_CS8920_ISAINT, lp->virt_addr + ADD_PORT);
- iowrite8(dev->irq, lp->virt_addr + DATA_PORT);
- iowrite8(0, lp->virt_addr + DATA_PORT + 1);
+ lp = netdev_priv(dev);
- iowrite16(PP_CS8920_ISAMemB, lp->virt_addr + ADD_PORT);
- iowrite8((dev->mem_start >> 16) & 0xff,
- lp->virt_addr + DATA_PORT);
- iowrite8((dev->mem_start >> 8) & 0xff,
- lp->virt_addr + DATA_PORT + 1);
+ /* we MUST read all the events out of the ISQ, otherwise we'll never
+ * get interrupted again. As a consequence, we can't have any limit
+ * on the number of times we loop in the interrupt handler. The
+ * hardware guarantees that eventually we'll run out of events. Of
+ * course, if you're on a slow machine, and packets are arriving
+ * faster than you can read them off, you're screwed. Hasta la
+ * vista, baby!
+ */
+ while ((status = ioread16(lp->virt_addr + ISQ_PORT))) {
+ cs89_dbg(4, debug, "%s: event=%04x\n", dev->name, status);
+ handled = 1;
+ switch (status & ISQ_EVENT_MASK) {
+ case ISQ_RECEIVER_EVENT:
+ /* Got a packet(s). */
+ net_rx(dev);
+ break;
+ case ISQ_TRANSMITTER_EVENT:
+ dev->stats.tx_packets++;
+ netif_wake_queue(dev); /* Inform upper layers. */
+ if ((status & (TX_OK |
+ TX_LOST_CRS |
+ TX_SQE_ERROR |
+ TX_LATE_COL |
+ TX_16_COL)) != TX_OK) {
+ if ((status & TX_OK) == 0)
+ dev->stats.tx_errors++;
+ if (status & TX_LOST_CRS)
+ dev->stats.tx_carrier_errors++;
+ if (status & TX_SQE_ERROR)
+ dev->stats.tx_heartbeat_errors++;
+ if (status & TX_LATE_COL)
+ dev->stats.tx_window_errors++;
+ if (status & TX_16_COL)
+ dev->stats.tx_aborted_errors++;
+ }
+ break;
+ case ISQ_BUFFER_EVENT:
+ if (status & READY_FOR_TX) {
+ /* we tried to transmit a packet earlier,
+ * but inexplicably ran out of buffers.
+ * That shouldn't happen since we only ever
+ * load one packet. Shrug. Do the right
+ * thing anyway.
+ */
+ netif_wake_queue(dev); /* Inform upper layers. */
+ }
+ if (status & TX_UNDERRUN) {
+ cs89_dbg(0, err, "%s: transmit underrun\n",
+ dev->name);
+ lp->send_underrun++;
+ if (lp->send_underrun == 3)
+ lp->send_cmd = TX_AFTER_381;
+ else if (lp->send_underrun == 6)
+ lp->send_cmd = TX_AFTER_ALL;
+ /* transmit cycle is done, although
+ * frame wasn't transmitted - this
+ * avoids having to wait for the upper
+ * layers to timeout on us, in the
+ * event of a tx underrun
+ */
+ netif_wake_queue(dev); /* Inform upper layers. */
+ }
+#if ALLOW_DMA
+ if (lp->use_dma && (status & RX_DMA)) {
+ int count = readreg(dev, PP_DmaFrameCnt);
+ while (count) {
+ cs89_dbg(5, debug,
+ "%s: receiving %d DMA frames\n",
+ dev->name, count);
+ if (count > 1)
+ cs89_dbg(2, debug,
+ "%s: receiving %d DMA frames\n",
+ dev->name, count);
+ dma_rx(dev);
+ if (--count == 0)
+ count = readreg(dev, PP_DmaFrameCnt);
+ if (count > 0)
+ cs89_dbg(2, debug,
+ "%s: continuing with %d DMA frames\n",
+ dev->name, count);
+ }
+ }
+#endif
+ break;
+ case ISQ_RX_MISS_EVENT:
+ dev->stats.rx_missed_errors += (status >> 6);
+ break;
+ case ISQ_TX_COL_EVENT:
+ dev->stats.collisions += (status >> 6);
+ break;
+ }
}
-#endif /* CS89x0_NONISA_IRQ */
-
- /* Wait until the chip is reset */
- reset_start_time = jiffies;
- while ((readreg(dev, PP_SelfST) & INIT_DONE) == 0 &&
- jiffies - reset_start_time < 2)
- ;
-#endif /* !CONFIG_MACH_MX31ADS */
+ return IRQ_RETVAL(handled);
}
+/* Open/initialize the board. This is called (in the current kernel)
+ sometime after booting when the 'ifconfig' program is run.
-static void
-control_dc_dc(struct net_device *dev, int on_not_off)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned int selfcontrol;
- int timenow = jiffies;
- /* control the DC to DC convertor in the SelfControl register.
- * Note: This is hooked up to a general purpose pin, might not
- * always be a DC to DC convertor.
- */
-
- selfcontrol = HCB1_ENBL; /* Enable the HCB1 bit as an output */
- if (((lp->adapter_cnf & A_CNF_DC_DC_POLARITY) != 0) ^ on_not_off)
- selfcontrol |= HCB1;
- else
- selfcontrol &= ~HCB1;
- writereg(dev, PP_SelfCTL, selfcontrol);
-
- /* Wait for the DC/DC converter to power up - 500ms */
- while (jiffies - timenow < HZ)
- ;
-}
+ This routine should set everything up anew at each open, even
+ registers that "should" only need to be set once at boot, so that
+ there is non-reboot way to recover if something goes wrong.
+*/
-#define DETECTED_NONE 0
-#define DETECTED_RJ45H 1
-#define DETECTED_RJ45F 2
-#define DETECTED_AUI 3
-#define DETECTED_BNC 4
+/* AKPM: do we need to do any locking here? */
static int
-detect_tp(struct net_device *dev)
+net_open(struct net_device *dev)
{
struct net_local *lp = netdev_priv(dev);
- int timenow = jiffies;
- int fdx;
-
- cs89_dbg(1, debug, "%s: Attempting TP\n", dev->name);
-
- /* If connected to another full duplex capable 10-Base-T card
- * the link pulses seem to be lost when the auto detect bit in
- * the LineCTL is set. To overcome this the auto detect bit will
- * be cleared whilst testing the 10-Base-T interface. This would
- * not be necessary for the sparrow chip but is simpler to do it
- * anyway.
- */
- writereg(dev, PP_LineCTL, lp->linectl & ~AUI_ONLY);
- control_dc_dc(dev, 0);
-
- /* Delay for the hardware to work out if the TP cable is present
- * - 150ms
- */
- for (timenow = jiffies; jiffies - timenow < 15;)
- ;
- if ((readreg(dev, PP_LineST) & LINK_OK) == 0)
- return DETECTED_NONE;
+ int result = 0;
+ int i;
+ int ret;
- if (lp->chip_type == CS8900) {
- switch (lp->force & 0xf0) {
+ if (dev->irq < 2) {
+ /* Allow interrupts to be generated by the chip */
+/* Cirrus' release had this: */
#if 0
- case FORCE_AUTO:
- pr_info("%s: cs8900 doesn't autonegotiate\n",
- dev->name);
- return DETECTED_NONE;
-#endif
- /* CS8900 doesn't support AUTO, change to HALF*/
- case FORCE_AUTO:
- lp->force &= ~FORCE_AUTO;
- lp->force |= FORCE_HALF;
- break;
- case FORCE_HALF:
- break;
- case FORCE_FULL:
- writereg(dev, PP_TestCTL,
- readreg(dev, PP_TestCTL) | FDX_8900);
- break;
- }
- fdx = readreg(dev, PP_TestCTL) & FDX_8900;
- } else {
- switch (lp->force & 0xf0) {
- case FORCE_AUTO:
- lp->auto_neg_cnf = AUTO_NEG_ENABLE;
- break;
- case FORCE_HALF:
- lp->auto_neg_cnf = 0;
- break;
- case FORCE_FULL:
- lp->auto_neg_cnf = RE_NEG_NOW | ALLOW_FDX;
- break;
- }
-
- writereg(dev, PP_AutoNegCTL, lp->auto_neg_cnf & AUTO_NEG_MASK);
-
- if ((lp->auto_neg_cnf & AUTO_NEG_BITS) == AUTO_NEG_ENABLE) {
- pr_info("%s: negotiating duplex...\n", dev->name);
- while (readreg(dev, PP_AutoNegST) & AUTO_NEG_BUSY) {
- if (jiffies - timenow > 4000) {
- pr_err("**** Full / half duplex auto-negotiation timed out ****\n");
- break;
- }
- }
- }
- fdx = readreg(dev, PP_AutoNegST) & FDX_ACTIVE;
- }
- if (fdx)
- return DETECTED_RJ45F;
- else
- return DETECTED_RJ45H;
-}
-
-/* send a test packet - return true if carrier bits are ok */
-static int
-send_test_pkt(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- char test_packet[] = {
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 46, /* A 46 in network order */
- 0, 0, /* DSAP=0 & SSAP=0 fields */
- 0xf3, 0 /* Control (Test Req + P bit set) */
- };
- long timenow = jiffies;
-
- writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_TX_ON);
-
- memcpy(test_packet, dev->dev_addr, ETH_ALEN);
- memcpy(test_packet + ETH_ALEN, dev->dev_addr, ETH_ALEN);
-
- iowrite16(TX_AFTER_ALL, lp->virt_addr + TX_CMD_PORT);
- iowrite16(ETH_ZLEN, lp->virt_addr + TX_LEN_PORT);
-
- /* Test to see if the chip has allocated memory for the packet */
- while (jiffies - timenow < 5)
- if (readreg(dev, PP_BusST) & READY_FOR_TX_NOW)
- break;
- if (jiffies - timenow >= 5)
- return 0; /* this shouldn't happen */
-
- /* Write the contents of the packet */
- writewords(lp, TX_FRAME_PORT, test_packet, (ETH_ZLEN + 1) >> 1);
-
- cs89_dbg(1, debug, "Sending test packet ");
- /* wait a couple of jiffies for packet to be received */
- for (timenow = jiffies; jiffies - timenow < 3;)
- ;
- if ((readreg(dev, PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
- cs89_dbg(1, cont, "succeeded\n");
- return 1;
- }
- cs89_dbg(1, cont, "failed\n");
- return 0;
-}
-
-
-static int
-detect_aui(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- cs89_dbg(1, debug, "%s: Attempting AUI\n", dev->name);
- control_dc_dc(dev, 0);
-
- writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
-
- if (send_test_pkt(dev))
- return DETECTED_AUI;
- else
- return DETECTED_NONE;
-}
-
-static int
-detect_bnc(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- cs89_dbg(1, debug, "%s: Attempting BNC\n", dev->name);
- control_dc_dc(dev, 1);
-
- writereg(dev, PP_LineCTL, (lp->linectl & ~AUTO_AUI_10BASET) | AUI_ONLY);
-
- if (send_test_pkt(dev))
- return DETECTED_BNC;
- else
- return DETECTED_NONE;
-}
-
-
-static void
-write_irq(struct net_device *dev, int chip_type, int irq)
-{
- int i;
-
- if (chip_type == CS8900) {
-#ifndef CONFIG_CS89x0_PLATFORM
- /* Search the mapping table for the corresponding IRQ pin. */
- for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++)
- if (cs8900_irq_map[i] == irq)
- break;
- /* Not found */
- if (i == ARRAY_SIZE(cs8900_irq_map))
- i = 3;
-#else
- /* INTRQ0 pin is used for interrupt generation. */
- i = 0;
-#endif
- writereg(dev, PP_CS8900_ISAINT, i);
- } else {
- writereg(dev, PP_CS8920_ISAINT, irq);
- }
-}
-
-/* Open/initialize the board. This is called (in the current kernel)
- sometime after booting when the 'ifconfig' program is run.
-
- This routine should set everything up anew at each open, even
- registers that "should" only need to be set once at boot, so that
- there is non-reboot way to recover if something goes wrong.
-*/
-
-/* AKPM: do we need to do any locking here? */
-
-static int
-net_open(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- int result = 0;
- int i;
- int ret;
-
- if (dev->irq < 2) {
- /* Allow interrupts to be generated by the chip */
-/* Cirrus' release had this: */
-#if 0
- writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
+ writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
#endif
/* And 2.3.47 had this: */
writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
@@ -1433,6 +1131,52 @@ bad_out:
return ret;
}
+/* The inverse routine to net_open(). */
+static int
+net_close(struct net_device *dev)
+{
+#if ALLOW_DMA
+ struct net_local *lp = netdev_priv(dev);
+#endif
+
+ netif_stop_queue(dev);
+
+ writereg(dev, PP_RxCFG, 0);
+ writereg(dev, PP_TxCFG, 0);
+ writereg(dev, PP_BufCFG, 0);
+ writereg(dev, PP_BusCTL, 0);
+
+ free_irq(dev->irq, dev);
+
+#if ALLOW_DMA
+ if (lp->use_dma && lp->dma) {
+ free_dma(dev->dma);
+ release_dma_buff(lp);
+ }
+#endif
+
+ /* Update the statistics here. */
+ return 0;
+}
+
+/* Get the current statistics.
+ * This may be called with the card open or closed.
+ */
+static struct net_device_stats *
+net_get_stats(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->lock, flags);
+ /* Update the statistics from the device registers. */
+ dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
+ dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ return &dev->stats;
+}
+
static void net_timeout(struct net_device *dev)
{
/* If we get here, some higher level has decided we are broken.
@@ -1495,278 +1239,509 @@ static netdev_tx_t net_send_packet(struct sk_buff *skb, struct net_device *dev)
return NETDEV_TX_OK;
}
-/* The typical workload of the driver:
- * Handle the network interface interrupts.
- */
-
-static irqreturn_t net_interrupt(int irq, void *dev_id)
+static void set_multicast_list(struct net_device *dev)
{
- struct net_device *dev = dev_id;
- struct net_local *lp;
- int status;
- int handled = 0;
+ struct net_local *lp = netdev_priv(dev);
+ unsigned long flags;
- lp = netdev_priv(dev);
+ spin_lock_irqsave(&lp->lock, flags);
+ if (dev->flags & IFF_PROMISC)
+ lp->rx_mode = RX_ALL_ACCEPT;
+ else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev))
+ /* The multicast-accept list is initialized to accept-all,
+ * and we rely on higher-level filtering for now.
+ */
+ lp->rx_mode = RX_MULTCAST_ACCEPT;
+ else
+ lp->rx_mode = 0;
- /* we MUST read all the events out of the ISQ, otherwise we'll never
- * get interrupted again. As a consequence, we can't have any limit
- * on the number of times we loop in the interrupt handler. The
- * hardware guarantees that eventually we'll run out of events. Of
- * course, if you're on a slow machine, and packets are arriving
- * faster than you can read them off, you're screwed. Hasta la
- * vista, baby!
+ writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
+
+ /* in promiscuous mode, we accept errored packets,
+ * so we have to enable interrupts on them also
*/
- while ((status = ioread16(lp->virt_addr + ISQ_PORT))) {
- cs89_dbg(4, debug, "%s: event=%04x\n", dev->name, status);
- handled = 1;
- switch (status & ISQ_EVENT_MASK) {
- case ISQ_RECEIVER_EVENT:
- /* Got a packet(s). */
- net_rx(dev);
- break;
- case ISQ_TRANSMITTER_EVENT:
- dev->stats.tx_packets++;
- netif_wake_queue(dev); /* Inform upper layers. */
- if ((status & (TX_OK |
- TX_LOST_CRS |
- TX_SQE_ERROR |
- TX_LATE_COL |
- TX_16_COL)) != TX_OK) {
- if ((status & TX_OK) == 0)
- dev->stats.tx_errors++;
- if (status & TX_LOST_CRS)
- dev->stats.tx_carrier_errors++;
- if (status & TX_SQE_ERROR)
- dev->stats.tx_heartbeat_errors++;
- if (status & TX_LATE_COL)
- dev->stats.tx_window_errors++;
- if (status & TX_16_COL)
- dev->stats.tx_aborted_errors++;
- }
- break;
- case ISQ_BUFFER_EVENT:
- if (status & READY_FOR_TX) {
- /* we tried to transmit a packet earlier,
- * but inexplicably ran out of buffers.
- * That shouldn't happen since we only ever
- * load one packet. Shrug. Do the right
- * thing anyway.
- */
- netif_wake_queue(dev); /* Inform upper layers. */
- }
- if (status & TX_UNDERRUN) {
- cs89_dbg(0, err, "%s: transmit underrun\n",
- dev->name);
- lp->send_underrun++;
- if (lp->send_underrun == 3)
- lp->send_cmd = TX_AFTER_381;
- else if (lp->send_underrun == 6)
- lp->send_cmd = TX_AFTER_ALL;
- /* transmit cycle is done, although
- * frame wasn't transmitted - this
- * avoids having to wait for the upper
- * layers to timeout on us, in the
- * event of a tx underrun
- */
- netif_wake_queue(dev); /* Inform upper layers. */
- }
-#if ALLOW_DMA
- if (lp->use_dma && (status & RX_DMA)) {
- int count = readreg(dev, PP_DmaFrameCnt);
- while (count) {
- cs89_dbg(5, debug,
- "%s: receiving %d DMA frames\n",
- dev->name, count);
- if (count > 1)
- cs89_dbg(2, debug,
- "%s: receiving %d DMA frames\n",
- dev->name, count);
- dma_rx(dev);
- if (--count == 0)
- count = readreg(dev, PP_DmaFrameCnt);
- if (count > 0)
- cs89_dbg(2, debug,
- "%s: continuing with %d DMA frames\n",
- dev->name, count);
- }
- }
-#endif
- break;
- case ISQ_RX_MISS_EVENT:
- dev->stats.rx_missed_errors += (status >> 6);
- break;
- case ISQ_TX_COL_EVENT:
- dev->stats.collisions += (status >> 6);
- break;
- }
- }
- return IRQ_RETVAL(handled);
+ writereg(dev, PP_RxCFG,
+ (lp->curr_rx_cfg |
+ (lp->rx_mode == RX_ALL_ACCEPT)
+ ? (RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL)
+ : 0));
+ spin_unlock_irqrestore(&lp->lock, flags);
}
-static void
-count_rx_errors(int status, struct net_device *dev)
+static int set_mac_address(struct net_device *dev, void *p)
{
- dev->stats.rx_errors++;
- if (status & RX_RUNT)
- dev->stats.rx_length_errors++;
- if (status & RX_EXTRA_DATA)
- dev->stats.rx_length_errors++;
- if ((status & RX_CRC_ERROR) && !(status & (RX_EXTRA_DATA | RX_RUNT)))
- /* per str 172 */
- dev->stats.rx_crc_errors++;
- if (status & RX_DRIBBLE)
- dev->stats.rx_frame_errors++;
+ int i;
+ struct sockaddr *addr = p;
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ cs89_dbg(0, debug, "%s: Setting MAC address to %pM\n",
+ dev->name, dev->dev_addr);
+
+ /* set the Ethernet address */
+ for (i = 0; i < ETH_ALEN / 2; i++)
+ writereg(dev, PP_IA + i * 2,
+ (dev->dev_addr[i * 2] |
+ (dev->dev_addr[i * 2 + 1] << 8)));
+
+ return 0;
}
-/* We have a good packet(s), get it/them out of the buffers. */
-static void
-net_rx(struct net_device *dev)
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void net_poll_controller(struct net_device *dev)
{
+ disable_irq(dev->irq);
+ net_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static const struct net_device_ops net_ops = {
+ .ndo_open = net_open,
+ .ndo_stop = net_close,
+ .ndo_tx_timeout = net_timeout,
+ .ndo_start_xmit = net_send_packet,
+ .ndo_get_stats = net_get_stats,
+ .ndo_set_rx_mode = set_multicast_list,
+ .ndo_set_mac_address = set_mac_address,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = net_poll_controller,
+#endif
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static void __init reset_chip(struct net_device *dev)
+{
+#if !defined(CONFIG_MACH_MX31ADS)
+#if !defined(CS89x0_NONISA_IRQ)
struct net_local *lp = netdev_priv(dev);
- struct sk_buff *skb;
- int status, length;
+#endif /* CS89x0_NONISA_IRQ */
+ int reset_start_time;
- status = ioread16(lp->virt_addr + RX_FRAME_PORT);
- length = ioread16(lp->virt_addr + RX_FRAME_PORT);
+ writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
- if ((status & RX_OK) == 0) {
- count_rx_errors(status, dev);
- return;
+ /* wait 30 ms */
+ msleep(30);
+
+#if !defined(CS89x0_NONISA_IRQ)
+ if (lp->chip_type != CS8900) {
+ /* Hardware problem requires PNP registers to be reconfigured after a reset */
+ iowrite16(PP_CS8920_ISAINT, lp->virt_addr + ADD_PORT);
+ iowrite8(dev->irq, lp->virt_addr + DATA_PORT);
+ iowrite8(0, lp->virt_addr + DATA_PORT + 1);
+
+ iowrite16(PP_CS8920_ISAMemB, lp->virt_addr + ADD_PORT);
+ iowrite8((dev->mem_start >> 16) & 0xff,
+ lp->virt_addr + DATA_PORT);
+ iowrite8((dev->mem_start >> 8) & 0xff,
+ lp->virt_addr + DATA_PORT + 1);
}
+#endif /* CS89x0_NONISA_IRQ */
- /* Malloc up new buffer. */
- skb = netdev_alloc_skb(dev, length + 2);
- if (skb == NULL) {
-#if 0 /* Again, this seems a cruel thing to do */
- pr_warn("%s: Memory squeeze, dropping packet\n", dev->name);
+ /* Wait until the chip is reset */
+ reset_start_time = jiffies;
+ while ((readreg(dev, PP_SelfST) & INIT_DONE) == 0 &&
+ jiffies - reset_start_time < 2)
+ ;
+#endif /* !CONFIG_MACH_MX31ADS */
+}
+
+/* This is the real probe routine.
+ * Linux has a history of friendly device probes on the ISA bus.
+ * A good device probes avoids doing writes, and
+ * verifies that the correct device exists and functions.
+ * Return 0 on success.
+ */
+static int __init
+cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int i;
+ int tmp;
+ unsigned rev_type = 0;
+ int eeprom_buff[CHKSUM_LEN];
+ int retval;
+
+ /* Initialize the device structure. */
+ if (!modular) {
+ memset(lp, 0, sizeof(*lp));
+ spin_lock_init(&lp->lock);
+#ifndef MODULE
+#if ALLOW_DMA
+ if (g_cs89x0_dma) {
+ lp->use_dma = 1;
+ lp->dma = g_cs89x0_dma;
+ lp->dmasize = 16; /* Could make this an option... */
+ }
#endif
- dev->stats.rx_dropped++;
- return;
+ lp->force = g_cs89x0_media__force;
+#endif
+ }
+
+ pr_debug("PP_addr at %p[%x]: 0x%x\n",
+ ioaddr, ADD_PORT, ioread16(ioaddr + ADD_PORT));
+ iowrite16(PP_ChipID, ioaddr + ADD_PORT);
+
+ tmp = ioread16(ioaddr + DATA_PORT);
+ if (tmp != CHIP_EISA_ID_SIG) {
+ pr_debug("%s: incorrect signature at %p[%x]: 0x%x!="
+ CHIP_EISA_ID_SIG_STR "\n",
+ dev->name, ioaddr, DATA_PORT, tmp);
+ retval = -ENODEV;
+ goto out1;
+ }
+
+ lp->virt_addr = ioaddr;
+
+ /* get the chip type */
+ rev_type = readreg(dev, PRODUCT_ID_ADD);
+ lp->chip_type = rev_type & ~REVISON_BITS;
+ lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
+
+ /* Check the chip type and revision in order to set the correct
+ * send command. CS8920 revision C and CS8900 revision F can use
+ * the faster send.
+ */
+ lp->send_cmd = TX_AFTER_381;
+ if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
+ lp->send_cmd = TX_NOW;
+ if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
+ lp->send_cmd = TX_NOW;
+
+ pr_info_once("%s\n", version);
+
+ pr_info("%s: cs89%c0%s rev %c found at %p ",
+ dev->name,
+ lp->chip_type == CS8900 ? '0' : '2',
+ lp->chip_type == CS8920M ? "M" : "",
+ lp->chip_revision,
+ lp->virt_addr);
+
+ reset_chip(dev);
+
+ /* Here we read the current configuration of the chip.
+ * If there is no Extended EEPROM then the idea is to not disturb
+ * the chip configuration, it should have been correctly setup by
+ * automatic EEPROM read on reset. So, if the chip says it read
+ * the EEPROM the driver will always do *something* instead of
+ * complain that adapter_cnf is 0.
+ */
+
+ if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
+ (EEPROM_OK | EEPROM_PRESENT)) {
+ /* Load the MAC. */
+ for (i = 0; i < ETH_ALEN / 2; i++) {
+ unsigned int Addr;
+ Addr = readreg(dev, PP_IA + i * 2);
+ dev->dev_addr[i * 2] = Addr & 0xFF;
+ dev->dev_addr[i * 2 + 1] = Addr >> 8;
+ }
+
+ /* Load the Adapter Configuration.
+ * Note: Barring any more specific information from some
+ * other source (ie EEPROM+Schematics), we would not know
+ * how to operate a 10Base2 interface on the AUI port.
+ * However, since we do read the status of HCB1 and use
+ * settings that always result in calls to control_dc_dc(dev,0)
+ * a BNC interface should work if the enable pin
+ * (dc/dc converter) is on HCB1.
+ * It will be called AUI however.
+ */
+
+ lp->adapter_cnf = 0;
+ i = readreg(dev, PP_LineCTL);
+ /* Preserve the setting of the HCB1 pin. */
+ if ((i & (HCB1 | HCB1_ENBL)) == (HCB1 | HCB1_ENBL))
+ lp->adapter_cnf |= A_CNF_DC_DC_POLARITY;
+ /* Save the sqelch bit */
+ if ((i & LOW_RX_SQUELCH) == LOW_RX_SQUELCH)
+ lp->adapter_cnf |= A_CNF_EXTND_10B_2 | A_CNF_LOW_RX_SQUELCH;
+ /* Check if the card is in 10Base-t only mode */
+ if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == 0)
+ lp->adapter_cnf |= A_CNF_10B_T | A_CNF_MEDIA_10B_T;
+ /* Check if the card is in AUI only mode */
+ if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUI_ONLY)
+ lp->adapter_cnf |= A_CNF_AUI | A_CNF_MEDIA_AUI;
+ /* Check if the card is in Auto mode. */
+ if ((i & (AUI_ONLY | AUTO_AUI_10BASET)) == AUTO_AUI_10BASET)
+ lp->adapter_cnf |= A_CNF_AUI | A_CNF_10B_T |
+ A_CNF_MEDIA_AUI | A_CNF_MEDIA_10B_T | A_CNF_MEDIA_AUTO;
+
+ cs89_dbg(1, info, "%s: PP_LineCTL=0x%x, adapter_cnf=0x%x\n",
+ dev->name, i, lp->adapter_cnf);
+
+ /* IRQ. Other chips already probe, see below. */
+ if (lp->chip_type == CS8900)
+ lp->isa_config = readreg(dev, PP_CS8900_ISAINT) & INT_NO_MASK;
+
+ pr_cont("[Cirrus EEPROM] ");
+ }
+
+ pr_cont("\n");
+
+ /* First check to see if an EEPROM is attached. */
+
+ if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
+ pr_warn("No EEPROM, relying on command line....\n");
+ else if (get_eeprom_data(dev, START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) {
+ pr_warn("EEPROM read failed, relying on command line\n");
+ } else if (get_eeprom_cksum(START_EEPROM_DATA, CHKSUM_LEN, eeprom_buff) < 0) {
+ /* Check if the chip was able to read its own configuration starting
+ at 0 in the EEPROM*/
+ if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) !=
+ (EEPROM_OK | EEPROM_PRESENT))
+ pr_warn("Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");
+
+ } else {
+ /* This reads an extended EEPROM that is not documented
+ * in the CS8900 datasheet.
+ */
+
+ /* get transmission control word but keep the autonegotiation bits */
+ if (!lp->auto_neg_cnf)
+ lp->auto_neg_cnf = eeprom_buff[AUTO_NEG_CNF_OFFSET / 2];
+ /* Store adapter configuration */
+ if (!lp->adapter_cnf)
+ lp->adapter_cnf = eeprom_buff[ADAPTER_CNF_OFFSET / 2];
+ /* Store ISA configuration */
+ lp->isa_config = eeprom_buff[ISA_CNF_OFFSET / 2];
+ dev->mem_start = eeprom_buff[PACKET_PAGE_OFFSET / 2] << 8;
+
+ /* eeprom_buff has 32-bit ints, so we can't just memcpy it */
+ /* store the initial memory base address */
+ for (i = 0; i < ETH_ALEN / 2; i++) {
+ dev->dev_addr[i * 2] = eeprom_buff[i];
+ dev->dev_addr[i * 2 + 1] = eeprom_buff[i] >> 8;
+ }
+ cs89_dbg(1, debug, "%s: new adapter_cnf: 0x%x\n",
+ dev->name, lp->adapter_cnf);
+ }
+
+ /* allow them to force multiple transceivers. If they force multiple, autosense */
+ {
+ int count = 0;
+ if (lp->force & FORCE_RJ45) {
+ lp->adapter_cnf |= A_CNF_10B_T;
+ count++;
+ }
+ if (lp->force & FORCE_AUI) {
+ lp->adapter_cnf |= A_CNF_AUI;
+ count++;
+ }
+ if (lp->force & FORCE_BNC) {
+ lp->adapter_cnf |= A_CNF_10B_2;
+ count++;
+ }
+ if (count > 1)
+ lp->adapter_cnf |= A_CNF_MEDIA_AUTO;
+ else if (lp->force & FORCE_RJ45)
+ lp->adapter_cnf |= A_CNF_MEDIA_10B_T;
+ else if (lp->force & FORCE_AUI)
+ lp->adapter_cnf |= A_CNF_MEDIA_AUI;
+ else if (lp->force & FORCE_BNC)
+ lp->adapter_cnf |= A_CNF_MEDIA_10B_2;
}
- skb_reserve(skb, 2); /* longword align L3 header */
- readwords(lp, RX_FRAME_PORT, skb_put(skb, length), length >> 1);
- if (length & 1)
- skb->data[length-1] = ioread16(lp->virt_addr + RX_FRAME_PORT);
+ cs89_dbg(1, debug, "%s: after force 0x%x, adapter_cnf=0x%x\n",
+ dev->name, lp->force, lp->adapter_cnf);
- cs89_dbg(3, debug, "%s: received %d byte packet of type %x\n",
- dev->name, length,
- (skb->data[ETH_ALEN + ETH_ALEN] << 8) |
- skb->data[ETH_ALEN + ETH_ALEN + 1]);
+ /* FIXME: We don't let you set dc-dc polarity or low RX squelch from the command line: add it here */
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += length;
-}
+ /* FIXME: We don't let you set the IMM bit from the command line: add it to lp->auto_neg_cnf here */
-#if ALLOW_DMA
-static void release_dma_buff(struct net_local *lp)
-{
- if (lp->dma_buff) {
- free_pages((unsigned long)(lp->dma_buff),
- get_order(lp->dmasize * 1024));
- lp->dma_buff = NULL;
- }
-}
-#endif
+ /* FIXME: we don't set the Ethernet address on the command line. Use
+ * ifconfig IFACE hw ether AABBCCDDEEFF
+ */
-/* The inverse routine to net_open(). */
-static int
-net_close(struct net_device *dev)
-{
-#if ALLOW_DMA
- struct net_local *lp = netdev_priv(dev);
-#endif
+ pr_info("media %s%s%s",
+ (lp->adapter_cnf & A_CNF_10B_T) ? "RJ-45," : "",
+ (lp->adapter_cnf & A_CNF_AUI) ? "AUI," : "",
+ (lp->adapter_cnf & A_CNF_10B_2) ? "BNC," : "");
- netif_stop_queue(dev);
+ lp->irq_map = 0xffff;
- writereg(dev, PP_RxCFG, 0);
- writereg(dev, PP_TxCFG, 0);
- writereg(dev, PP_BufCFG, 0);
- writereg(dev, PP_BusCTL, 0);
+ /* If this is a CS8900 then no pnp soft */
+ if (lp->chip_type != CS8900 &&
+ /* Check if the ISA IRQ has been set */
+ (i = readreg(dev, PP_CS8920_ISAINT) & 0xff,
+ (i != 0 && i < CS8920_NO_INTS))) {
+ if (!dev->irq)
+ dev->irq = i;
+ } else {
+ i = lp->isa_config & INT_NO_MASK;
+#ifndef CONFIG_CS89x0_PLATFORM
+ if (lp->chip_type == CS8900) {
+#ifdef CS89x0_NONISA_IRQ
+ i = cs8900_irq_map[0];
+#else
+ /* Translate the IRQ using the IRQ mapping table. */
+ if (i >= ARRAY_SIZE(cs8900_irq_map))
+ pr_err("invalid ISA interrupt number %d\n", i);
+ else
+ i = cs8900_irq_map[i];
- free_irq(dev->irq, dev);
+ lp->irq_map = CS8900_IRQ_MAP; /* fixed IRQ map for CS8900 */
+ } else {
+ int irq_map_buff[IRQ_MAP_LEN/2];
-#if ALLOW_DMA
- if (lp->use_dma && lp->dma) {
- free_dma(dev->dma);
- release_dma_buff(lp);
+ if (get_eeprom_data(dev, IRQ_MAP_EEPROM_DATA,
+ IRQ_MAP_LEN / 2,
+ irq_map_buff) >= 0) {
+ if ((irq_map_buff[0] & 0xff) == PNP_IRQ_FRMT)
+ lp->irq_map = ((irq_map_buff[0] >> 8) |
+ (irq_map_buff[1] << 8));
+ }
+#endif
+ }
+#endif
+ if (!dev->irq)
+ dev->irq = i;
}
+
+ pr_cont(" IRQ %d", dev->irq);
+
+#if ALLOW_DMA
+ if (lp->use_dma) {
+ get_dma_channel(dev);
+ pr_cont(", DMA %d", dev->dma);
+ } else
#endif
+ pr_cont(", programmed I/O");
- /* Update the statistics here. */
+ /* print the ethernet address. */
+ pr_cont(", MAC %pM\n", dev->dev_addr);
+
+ dev->netdev_ops = &net_ops;
+ dev->watchdog_timeo = HZ;
+
+ cs89_dbg(0, info, "cs89x0_probe1() successful\n");
+
+ retval = register_netdev(dev);
+ if (retval)
+ goto out2;
return 0;
+out2:
+ iowrite16(PP_ChipID, lp->virt_addr + ADD_PORT);
+out1:
+ return retval;
}
-/* Get the current statistics.
- * This may be called with the card open or closed.
+#ifndef CONFIG_CS89x0_PLATFORM
+/*
+ * This function converts the I/O port addres used by the cs89x0_probe() and
+ * init_module() functions to the I/O memory address used by the
+ * cs89x0_probe1() function.
*/
-static struct net_device_stats *
-net_get_stats(struct net_device *dev)
+static int __init
+cs89x0_ioport_probe(struct net_device *dev, unsigned long ioport, int modular)
{
struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
-
- spin_lock_irqsave(&lp->lock, flags);
- /* Update the statistics from the device registers. */
- dev->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
- dev->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
- spin_unlock_irqrestore(&lp->lock, flags);
+ int ret;
+ void __iomem *io_mem;
- return &dev->stats;
-}
+ if (!lp)
+ return -ENOMEM;
-static void set_multicast_list(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
+ dev->base_addr = ioport;
- spin_lock_irqsave(&lp->lock, flags);
- if (dev->flags & IFF_PROMISC)
- lp->rx_mode = RX_ALL_ACCEPT;
- else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev))
- /* The multicast-accept list is initialized to accept-all,
- * and we rely on higher-level filtering for now.
- */
- lp->rx_mode = RX_MULTCAST_ACCEPT;
- else
- lp->rx_mode = 0;
+ if (!request_region(ioport, NETCARD_IO_EXTENT, DRV_NAME)) {
+ ret = -EBUSY;
+ goto out;
+ }
- writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
+ io_mem = ioport_map(ioport & ~3, NETCARD_IO_EXTENT);
+ if (!io_mem) {
+ ret = -ENOMEM;
+ goto release;
+ }
- /* in promiscuous mode, we accept errored packets,
- * so we have to enable interrupts on them also
+ /* if they give us an odd I/O address, then do ONE write to
+ * the address port, to get it back to address zero, where we
+ * expect to find the EISA signature word. An IO with a base of 0x3
+ * will skip the test for the ADD_PORT.
*/
- writereg(dev, PP_RxCFG,
- (lp->curr_rx_cfg |
- (lp->rx_mode == RX_ALL_ACCEPT)
- ? (RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL)
- : 0));
- spin_unlock_irqrestore(&lp->lock, flags);
+ if (ioport & 1) {
+ cs89_dbg(1, info, "%s: odd ioaddr 0x%lx\n", dev->name, ioport);
+ if ((ioport & 2) != 2) {
+ if ((ioread16(io_mem + ADD_PORT) & ADD_MASK) !=
+ ADD_SIG) {
+ pr_err("%s: bad signature 0x%x\n",
+ dev->name, ioread16(io_mem + ADD_PORT));
+ ret = -ENODEV;
+ goto unmap;
+ }
+ }
+ }
+
+ ret = cs89x0_probe1(dev, io_mem, modular);
+ if (!ret)
+ goto out;
+unmap:
+ ioport_unmap(io_mem);
+release:
+ release_region(ioport, NETCARD_IO_EXTENT);
+out:
+ return ret;
}
-static int set_mac_address(struct net_device *dev, void *p)
-{
- int i;
- struct sockaddr *addr = p;
+#ifndef MODULE
+/* Check for a network adaptor of this type, and return '0' iff one exists.
+ * If dev->base_addr == 0, probe all likely locations.
+ * If dev->base_addr == 1, always return failure.
+ * If dev->base_addr == 2, allocate space for the device and return success
+ * (detachable devices only).
+ * Return 0 on success.
+ */
- if (netif_running(dev))
- return -EBUSY;
+struct net_device * __init cs89x0_probe(int unit)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+ unsigned *port;
+ int err = 0;
+ int irq;
+ int io;
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ if (!dev)
+ return ERR_PTR(-ENODEV);
- cs89_dbg(0, debug, "%s: Setting MAC address to %pM\n",
- dev->name, dev->dev_addr);
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+ io = dev->base_addr;
+ irq = dev->irq;
- /* set the Ethernet address */
- for (i = 0; i < ETH_ALEN / 2; i++)
- writereg(dev, PP_IA + i * 2,
- (dev->dev_addr[i * 2] |
- (dev->dev_addr[i * 2 + 1] << 8)));
+ cs89_dbg(0, info, "cs89x0_probe(0x%x)\n", io);
- return 0;
+ if (io > 0x1ff) { /* Check a single specified location. */
+ err = cs89x0_ioport_probe(dev, io, 0);
+ } else if (io != 0) { /* Don't probe at all. */
+ err = -ENXIO;
+ } else {
+ for (port = netcard_portlist; *port; port++) {
+ if (cs89x0_ioport_probe(dev, *port, 0) == 0)
+ break;
+ dev->irq = irq;
+ }
+ if (!*port)
+ err = -ENODEV;
+ }
+ if (err)
+ goto out;
+ return dev;
+out:
+ free_netdev(dev);
+ pr_warn("no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
+ return ERR_PTR(err);
}
+#endif
+#endif
#if defined(MODULE) && !defined(CONFIG_CS89x0_PLATFORM)
--
1.7.8.111.gad25c.dirty
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH net-next 0/5] cirrus: cs89x0: Neatening
2012-05-18 22:56 [PATCH net-next 0/5] cirrus: cs89x0: Neatening Joe Perches
` (4 preceding siblings ...)
2012-05-18 22:56 ` [PATCH net-next 5/5] cirrus: cs89x0: Remove function prototypes and reorder declarations Joe Perches
@ 2012-05-19 3:53 ` David Miller
5 siblings, 0 replies; 7+ messages in thread
From: David Miller @ 2012-05-19 3:53 UTC (permalink / raw)
To: joe; +Cc: netdev, jaccon.bastiaansen, linux-kernel
From: Joe Perches <joe@perches.com>
Date: Fri, 18 May 2012 15:56:26 -0700
> Yeah, some might consider it gratuitous.
> I think it's cleaner now though.
>
> Joe Perches (5):
> cirrus: cs89x0: Code style neatening
> cirrus: cs89x0: Convert printks to pr_<level>
> cirrus: cs89x0: Code neatening
> cirrus: cs89x0: Neaten debugging and logging
> cirrus: cs89x0: Remove function prototypes and reorder declarations
Series applied, thanks joe.
^ permalink raw reply [flat|nested] 7+ messages in thread