* [PATCH 2/2 V2] iproute2 vxlan documentation update for ip command
@ 2013-07-08 12:05 Thomas Richter
2013-07-09 16:40 ` Stephen Hemminger
0 siblings, 1 reply; 2+ messages in thread
From: Thomas Richter @ 2013-07-08 12:05 UTC (permalink / raw)
To: netdev; +Cc: Thomas Richter
The ip link command line help and the ip-link.8.in
man page are outdated in regards to the vxlan support.
The patch updates both the command line help for the
ip command and its man page.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
---
ip/iplink.c | 2 +-
man/man8/ip-link.8.in | 85 +++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+), 1 deletion(-)
diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in
index 2e89efe..86e0bc9 100644
--- a/man/man8/ip-link.8.in
+++ b/man/man8/ip-link.8.in
@@ -196,6 +196,91 @@ specifies the number of transmit queues for new device.
.BI numrxqueues " QUEUE_COUNT "
specifies the number of receive queues for new device.
+.TP
+VXLAN Type Support
+For a link of type
+.I VXLAN
+the following additional arguments are supported:
+
+.BI "ip link add " DEVICE
+.BI type " vxlan " id " ID
+.R " [ "
+.BI dev " PHYS_DEV "
+.R " ] [ "
+.BI group " IPADDR "
+.R " ] [ "
+.BI local " IPADDR "
+.R " ] [ "
+.BI ttl " TTL "
+.R " ] [ "
+.BI tos " TOS "
+.R " ] [ "
+.BI port " MIN MAX "
+.R " ] [ "
+.I "[no]learning "
+.R " ] [ "
+.I "[no]proxy "
+.R " ] [ "
+.I "[no]rsc "
+.R " ] [ "
+.I "[no]l2miss "
+.R " ] [ "
+.I "[no]l3miss "
+.R " ]"
+
+.in +8
+.sp
+.BI id " VNI "
+- specifies the VXLAN Network Identifer (or VXLAN Segment
+Identifier) to use.
+
+.BI dev " PHYS_DEV"
+- specifies the physical device to use for tunnel endpoint communication.
+
+.sp
+.BI group " IPADDR"
+- specifies the multicast IP address to join.
+
+.sp
+.BI local " IPADDR"
+- specifies the source IP address to use in outgoing packets.
+
+.sp
+.BI ttl " TTL"
+- specifies the TTL value to use in outgoing packets.
+
+.sp
+.BI tos " TOS"
+- specifies the TOS value to use in outgoing packets.
+
+.sp
+.BI port " MIN MAX"
+- specifies the range of port numbers to use as UDP
+source ports to communicate to the remote VXLAN tunnel endpoint.
+
+.sp
+.I [no]learning
+- specifies if unknown source link layer addresses and IP addresses
+are entered into the VXLAN device forwarding database.
+
+.sp
+.I [no]rsc
+- specifies if route short circuit is turned on.
+
+.sp
+.I [no]proxy
+- specifies ARP proxy is turned on.
+
+.sp
+.I [no]l2miss
+- specifies if netlink LLADDR miss notifications are generated.
+
+.sp
+.I [no]l3miss
+- specifies if netlink IP ADDR miss notifications are generated.
+
+.in -8
+
.SS ip link delete - delete virtual link
.I DEVICE
specifies the virtual device to act operate on.
--
1.8.1.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 2/2 V2] iproute2 vxlan documentation update for ip command
2013-07-08 12:05 [PATCH 2/2 V2] iproute2 vxlan documentation update for ip command Thomas Richter
@ 2013-07-09 16:40 ` Stephen Hemminger
0 siblings, 0 replies; 2+ messages in thread
From: Stephen Hemminger @ 2013-07-09 16:40 UTC (permalink / raw)
To: Thomas Richter; +Cc: netdev
On Mon, 8 Jul 2013 14:05:43 +0200
Thomas Richter <tmricht@linux.vnet.ibm.com> wrote:
> The ip link command line help and the ip-link.8.in
> man page are outdated in regards to the vxlan support.
> The patch updates both the command line help for the
> ip command and its man page.
>
> Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Applied
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-07-09 16:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-08 12:05 [PATCH 2/2 V2] iproute2 vxlan documentation update for ip command Thomas Richter
2013-07-09 16:40 ` Stephen Hemminger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).