* [PATCH 0/7] Drop support for Renesys H8/300 architecture
@ 2013-08-30 16:40 Guenter Roeck
2013-08-30 16:40 ` [PATCH 1/7] Drop support for Renesys H8/300 (h8300) architecture Guenter Roeck
` (8 more replies)
0 siblings, 9 replies; 18+ messages in thread
From: Guenter Roeck @ 2013-08-30 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: linux-ide, netdev, linux-watchdog, Wim Van Sebroeck,
David S. Miller, Al Viro, Eric Paris, Greg Kroah-Hartman,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell,
Linus Torvalds, Guenter Roeck
H8/300 has been dead for several years, the kernel for it has
not compiled for ages, and recent versions of gcc for it are broken.
It is time to drop support for it.
Yes, I understand it is not that simple to drop an architecture,
and it may need some discussion, but someone has to put a stake
into the ground. Keeping a virtually dead architecture on life support
takes resources which are better spent elsewhere.
----------------------------------------------------------------
Guenter Roeck (7):
Drop support for Renesys H8/300 (h8300) architecture
ide: Drop H8/300 driver
net/ethernet: smsc: Drop conditional code for H8/300
net/ethernet: Drop H8/300 Ethernet driver
watchdog: Drop references to H8300 architecture
Drop MAINTAINERS entry for H8/300
Drop remaining references to H8/300 architecture
Documentation/scheduler/sched-arch.txt | 5 -
MAINTAINERS | 8 -
arch/h8300/Kconfig | 109 ----
arch/h8300/Kconfig.cpu | 171 ------
arch/h8300/Kconfig.debug | 68 ---
arch/h8300/Kconfig.ide | 44 --
arch/h8300/Makefile | 71 ---
arch/h8300/README | 38 --
arch/h8300/boot/Makefile | 22 -
arch/h8300/boot/compressed/Makefile | 37 --
arch/h8300/boot/compressed/head.S | 47 --
arch/h8300/boot/compressed/misc.c | 180 ------
arch/h8300/boot/compressed/vmlinux.lds | 32 -
arch/h8300/boot/compressed/vmlinux.scr | 9 -
arch/h8300/defconfig | 42 --
arch/h8300/include/asm/Kbuild | 8 -
arch/h8300/include/asm/asm-offsets.h | 1 -
arch/h8300/include/asm/atomic.h | 146 -----
arch/h8300/include/asm/barrier.h | 29 -
arch/h8300/include/asm/bitops.h | 211 -------
arch/h8300/include/asm/bootinfo.h | 2 -
arch/h8300/include/asm/bug.h | 12 -
arch/h8300/include/asm/bugs.h | 16 -
arch/h8300/include/asm/cache.h | 13 -
arch/h8300/include/asm/cachectl.h | 14 -
arch/h8300/include/asm/cacheflush.h | 40 --
arch/h8300/include/asm/checksum.h | 102 ----
arch/h8300/include/asm/cmpxchg.h | 60 --
arch/h8300/include/asm/cputime.h | 6 -
arch/h8300/include/asm/current.h | 25 -
arch/h8300/include/asm/dbg.h | 2 -
arch/h8300/include/asm/delay.h | 38 --
arch/h8300/include/asm/device.h | 7 -
arch/h8300/include/asm/div64.h | 1 -
arch/h8300/include/asm/dma.h | 15 -
arch/h8300/include/asm/elf.h | 101 ----
arch/h8300/include/asm/emergency-restart.h | 6 -
arch/h8300/include/asm/fb.h | 12 -
arch/h8300/include/asm/flat.h | 26 -
arch/h8300/include/asm/fpu.h | 1 -
arch/h8300/include/asm/ftrace.h | 1 -
arch/h8300/include/asm/futex.h | 6 -
arch/h8300/include/asm/gpio-internal.h | 52 --
arch/h8300/include/asm/hardirq.h | 19 -
arch/h8300/include/asm/hw_irq.h | 1 -
arch/h8300/include/asm/io.h | 358 -----------
arch/h8300/include/asm/irq.h | 49 --
arch/h8300/include/asm/irq_regs.h | 1 -
arch/h8300/include/asm/irqflags.h | 43 --
arch/h8300/include/asm/kdebug.h | 1 -
arch/h8300/include/asm/kmap_types.h | 6 -
arch/h8300/include/asm/local.h | 6 -
arch/h8300/include/asm/local64.h | 1 -
arch/h8300/include/asm/mc146818rtc.h | 9 -
arch/h8300/include/asm/mmu_context.h | 32 -
arch/h8300/include/asm/mutex.h | 9 -
arch/h8300/include/asm/page.h | 78 ---
arch/h8300/include/asm/page_offset.h | 3 -
arch/h8300/include/asm/param.h | 9 -
arch/h8300/include/asm/pci.h | 19 -
arch/h8300/include/asm/percpu.h | 6 -
arch/h8300/include/asm/pgalloc.h | 8 -
arch/h8300/include/asm/pgtable.h | 73 ---
arch/h8300/include/asm/processor.h | 139 -----
arch/h8300/include/asm/ptrace.h | 33 --
arch/h8300/include/asm/regs267x.h | 336 -----------
arch/h8300/include/asm/regs306x.h | 212 -------
arch/h8300/include/asm/scatterlist.h | 6 -
arch/h8300/include/asm/sections.h | 6 -
arch/h8300/include/asm/segment.h | 49 --
arch/h8300/include/asm/sh_bios.h | 29 -
arch/h8300/include/asm/shm.h | 31 -
arch/h8300/include/asm/shmparam.h | 6 -
arch/h8300/include/asm/signal.h | 24 -
arch/h8300/include/asm/smp.h | 1 -
arch/h8300/include/asm/spinlock.h | 6 -
arch/h8300/include/asm/string.h | 44 --
arch/h8300/include/asm/switch_to.h | 50 --
arch/h8300/include/asm/target_time.h | 4 -
arch/h8300/include/asm/termios.h | 50 --
arch/h8300/include/asm/thread_info.h | 103 ----
arch/h8300/include/asm/timer.h | 25 -
arch/h8300/include/asm/timex.h | 19 -
arch/h8300/include/asm/tlb.h | 8 -
arch/h8300/include/asm/tlbflush.h | 55 --
arch/h8300/include/asm/topology.h | 6 -
arch/h8300/include/asm/traps.h | 37 --
arch/h8300/include/asm/types.h | 9 -
arch/h8300/include/asm/uaccess.h | 163 ------
arch/h8300/include/asm/ucontext.h | 12 -
arch/h8300/include/asm/unaligned.h | 11 -
arch/h8300/include/asm/unistd.h | 36 --
arch/h8300/include/asm/user.h | 75 ---
arch/h8300/include/asm/virtconvert.h | 20 -
arch/h8300/include/uapi/asm/Kbuild | 34 --
arch/h8300/include/uapi/asm/auxvec.h | 4 -
arch/h8300/include/uapi/asm/bitsperlong.h | 1 -
arch/h8300/include/uapi/asm/byteorder.h | 6 -
arch/h8300/include/uapi/asm/errno.h | 6 -
arch/h8300/include/uapi/asm/fcntl.h | 11 -
arch/h8300/include/uapi/asm/ioctl.h | 1 -
arch/h8300/include/uapi/asm/ioctls.h | 8 -
arch/h8300/include/uapi/asm/ipcbuf.h | 1 -
arch/h8300/include/uapi/asm/kvm_para.h | 1 -
arch/h8300/include/uapi/asm/mman.h | 1 -
arch/h8300/include/uapi/asm/msgbuf.h | 31 -
arch/h8300/include/uapi/asm/param.h | 16 -
arch/h8300/include/uapi/asm/poll.h | 11 -
arch/h8300/include/uapi/asm/posix_types.h | 26 -
arch/h8300/include/uapi/asm/ptrace.h | 44 --
arch/h8300/include/uapi/asm/resource.h | 6 -
arch/h8300/include/uapi/asm/sembuf.h | 25 -
arch/h8300/include/uapi/asm/setup.h | 6 -
arch/h8300/include/uapi/asm/shmbuf.h | 42 --
arch/h8300/include/uapi/asm/sigcontext.h | 18 -
arch/h8300/include/uapi/asm/siginfo.h | 6 -
arch/h8300/include/uapi/asm/signal.h | 115 ----
arch/h8300/include/uapi/asm/socket.h | 79 ---
arch/h8300/include/uapi/asm/sockios.h | 13 -
arch/h8300/include/uapi/asm/stat.h | 78 ---
arch/h8300/include/uapi/asm/statfs.h | 6 -
arch/h8300/include/uapi/asm/swab.h | 10 -
arch/h8300/include/uapi/asm/termbits.h | 201 -------
arch/h8300/include/uapi/asm/termios.h | 44 --
arch/h8300/include/uapi/asm/types.h | 1 -
arch/h8300/include/uapi/asm/unistd.h | 330 -----------
arch/h8300/kernel/Makefile | 12 -
arch/h8300/kernel/asm-offsets.c | 60 --
arch/h8300/kernel/entry.S | 402 -------------
arch/h8300/kernel/gpio.c | 178 ------
arch/h8300/kernel/h8300_ksyms.c | 100 ----
arch/h8300/kernel/irq.c | 165 ------
arch/h8300/kernel/module.c | 75 ---
arch/h8300/kernel/process.c | 154 -----
arch/h8300/kernel/ptrace.c | 168 ------
arch/h8300/kernel/setup.c | 242 --------
arch/h8300/kernel/signal.c | 444 --------------
arch/h8300/kernel/sys_h8300.c | 48 --
arch/h8300/kernel/syscalls.S | 338 -----------
arch/h8300/kernel/time.c | 66 ---
arch/h8300/kernel/timer/Makefile | 6 -
arch/h8300/kernel/timer/itu.c | 82 ---
arch/h8300/kernel/timer/timer16.c | 77 ---
arch/h8300/kernel/timer/timer8.c | 102 ----
arch/h8300/kernel/timer/tpu.c | 100 ----
arch/h8300/kernel/traps.c | 166 ------
arch/h8300/kernel/vmlinux.lds.S | 157 -----
arch/h8300/lib/Makefile | 5 -
arch/h8300/lib/abs.S | 21 -
arch/h8300/lib/ashrdi3.c | 63 --
arch/h8300/lib/checksum.c | 164 ------
arch/h8300/lib/memcpy.S | 84 ---
arch/h8300/lib/memset.S | 61 --
arch/h8300/lib/romfs.S | 57 --
arch/h8300/mm/Makefile | 5 -
arch/h8300/mm/fault.c | 56 --
arch/h8300/mm/init.c | 155 -----
arch/h8300/mm/kmap.c | 58 --
arch/h8300/mm/memory.c | 54 --
arch/h8300/platform/h8300h/Makefile | 7 -
arch/h8300/platform/h8300h/aki3068net/Makefile | 5 -
arch/h8300/platform/h8300h/aki3068net/crt0_ram.S | 110 ----
arch/h8300/platform/h8300h/generic/Makefile | 5 -
arch/h8300/platform/h8300h/generic/crt0_ram.S | 107 ----
arch/h8300/platform/h8300h/generic/crt0_rom.S | 122 ----
arch/h8300/platform/h8300h/h8max/Makefile | 5 -
arch/h8300/platform/h8300h/h8max/crt0_ram.S | 110 ----
arch/h8300/platform/h8300h/irq.c | 82 ---
arch/h8300/platform/h8300h/ptrace_h8300h.c | 284 ---------
arch/h8300/platform/h8s/Makefile | 7 -
arch/h8300/platform/h8s/edosk2674/Makefile | 5 -
arch/h8300/platform/h8s/edosk2674/crt0_ram.S | 130 ----
arch/h8300/platform/h8s/edosk2674/crt0_rom.S | 186 ------
arch/h8300/platform/h8s/generic/Makefile | 5 -
arch/h8300/platform/h8s/generic/crt0_ram.S | 127 ----
arch/h8300/platform/h8s/generic/crt0_rom.S | 128 ----
arch/h8300/platform/h8s/irq.c | 104 ----
arch/h8300/platform/h8s/ptrace_h8s.c | 84 ---
drivers/ide/Kconfig | 7 -
drivers/ide/Makefile | 2 -
drivers/ide/ide-h8300.c | 109 ----
drivers/net/Space.c | 3 +-
drivers/net/ethernet/8390/Kconfig | 7 -
drivers/net/ethernet/8390/Makefile | 1 -
drivers/net/ethernet/8390/ne-h8300.c | 684 ----------------------
drivers/net/ethernet/smsc/smc9194.c | 12 -
drivers/watchdog/Kconfig | 2 -
drivers/watchdog/Makefile | 2 -
include/linux/serial_sci.h | 2 +-
include/uapi/linux/audit.h | 1 -
include/uapi/linux/elf-em.h | 1 -
tools/testing/ktest/examples/crosstests.conf | 6 -
192 files changed, 2 insertions(+), 11729 deletions(-)
delete mode 100644 arch/h8300/Kconfig
delete mode 100644 arch/h8300/Kconfig.cpu
delete mode 100644 arch/h8300/Kconfig.debug
delete mode 100644 arch/h8300/Kconfig.ide
delete mode 100644 arch/h8300/Makefile
delete mode 100644 arch/h8300/README
delete mode 100644 arch/h8300/boot/Makefile
delete mode 100644 arch/h8300/boot/compressed/Makefile
delete mode 100644 arch/h8300/boot/compressed/head.S
delete mode 100644 arch/h8300/boot/compressed/misc.c
delete mode 100644 arch/h8300/boot/compressed/vmlinux.lds
delete mode 100644 arch/h8300/boot/compressed/vmlinux.scr
delete mode 100644 arch/h8300/defconfig
delete mode 100644 arch/h8300/include/asm/Kbuild
delete mode 100644 arch/h8300/include/asm/asm-offsets.h
delete mode 100644 arch/h8300/include/asm/atomic.h
delete mode 100644 arch/h8300/include/asm/barrier.h
delete mode 100644 arch/h8300/include/asm/bitops.h
delete mode 100644 arch/h8300/include/asm/bootinfo.h
delete mode 100644 arch/h8300/include/asm/bug.h
delete mode 100644 arch/h8300/include/asm/bugs.h
delete mode 100644 arch/h8300/include/asm/cache.h
delete mode 100644 arch/h8300/include/asm/cachectl.h
delete mode 100644 arch/h8300/include/asm/cacheflush.h
delete mode 100644 arch/h8300/include/asm/checksum.h
delete mode 100644 arch/h8300/include/asm/cmpxchg.h
delete mode 100644 arch/h8300/include/asm/cputime.h
delete mode 100644 arch/h8300/include/asm/current.h
delete mode 100644 arch/h8300/include/asm/dbg.h
delete mode 100644 arch/h8300/include/asm/delay.h
delete mode 100644 arch/h8300/include/asm/device.h
delete mode 100644 arch/h8300/include/asm/div64.h
delete mode 100644 arch/h8300/include/asm/dma.h
delete mode 100644 arch/h8300/include/asm/elf.h
delete mode 100644 arch/h8300/include/asm/emergency-restart.h
delete mode 100644 arch/h8300/include/asm/fb.h
delete mode 100644 arch/h8300/include/asm/flat.h
delete mode 100644 arch/h8300/include/asm/fpu.h
delete mode 100644 arch/h8300/include/asm/ftrace.h
delete mode 100644 arch/h8300/include/asm/futex.h
delete mode 100644 arch/h8300/include/asm/gpio-internal.h
delete mode 100644 arch/h8300/include/asm/hardirq.h
delete mode 100644 arch/h8300/include/asm/hw_irq.h
delete mode 100644 arch/h8300/include/asm/io.h
delete mode 100644 arch/h8300/include/asm/irq.h
delete mode 100644 arch/h8300/include/asm/irq_regs.h
delete mode 100644 arch/h8300/include/asm/irqflags.h
delete mode 100644 arch/h8300/include/asm/kdebug.h
delete mode 100644 arch/h8300/include/asm/kmap_types.h
delete mode 100644 arch/h8300/include/asm/local.h
delete mode 100644 arch/h8300/include/asm/local64.h
delete mode 100644 arch/h8300/include/asm/mc146818rtc.h
delete mode 100644 arch/h8300/include/asm/mmu_context.h
delete mode 100644 arch/h8300/include/asm/mutex.h
delete mode 100644 arch/h8300/include/asm/page.h
delete mode 100644 arch/h8300/include/asm/page_offset.h
delete mode 100644 arch/h8300/include/asm/param.h
delete mode 100644 arch/h8300/include/asm/pci.h
delete mode 100644 arch/h8300/include/asm/percpu.h
delete mode 100644 arch/h8300/include/asm/pgalloc.h
delete mode 100644 arch/h8300/include/asm/pgtable.h
delete mode 100644 arch/h8300/include/asm/processor.h
delete mode 100644 arch/h8300/include/asm/ptrace.h
delete mode 100644 arch/h8300/include/asm/regs267x.h
delete mode 100644 arch/h8300/include/asm/regs306x.h
delete mode 100644 arch/h8300/include/asm/scatterlist.h
delete mode 100644 arch/h8300/include/asm/sections.h
delete mode 100644 arch/h8300/include/asm/segment.h
delete mode 100644 arch/h8300/include/asm/sh_bios.h
delete mode 100644 arch/h8300/include/asm/shm.h
delete mode 100644 arch/h8300/include/asm/shmparam.h
delete mode 100644 arch/h8300/include/asm/signal.h
delete mode 100644 arch/h8300/include/asm/smp.h
delete mode 100644 arch/h8300/include/asm/spinlock.h
delete mode 100644 arch/h8300/include/asm/string.h
delete mode 100644 arch/h8300/include/asm/switch_to.h
delete mode 100644 arch/h8300/include/asm/target_time.h
delete mode 100644 arch/h8300/include/asm/termios.h
delete mode 100644 arch/h8300/include/asm/thread_info.h
delete mode 100644 arch/h8300/include/asm/timer.h
delete mode 100644 arch/h8300/include/asm/timex.h
delete mode 100644 arch/h8300/include/asm/tlb.h
delete mode 100644 arch/h8300/include/asm/tlbflush.h
delete mode 100644 arch/h8300/include/asm/topology.h
delete mode 100644 arch/h8300/include/asm/traps.h
delete mode 100644 arch/h8300/include/asm/types.h
delete mode 100644 arch/h8300/include/asm/uaccess.h
delete mode 100644 arch/h8300/include/asm/ucontext.h
delete mode 100644 arch/h8300/include/asm/unaligned.h
delete mode 100644 arch/h8300/include/asm/unistd.h
delete mode 100644 arch/h8300/include/asm/user.h
delete mode 100644 arch/h8300/include/asm/virtconvert.h
delete mode 100644 arch/h8300/include/uapi/asm/Kbuild
delete mode 100644 arch/h8300/include/uapi/asm/auxvec.h
delete mode 100644 arch/h8300/include/uapi/asm/bitsperlong.h
delete mode 100644 arch/h8300/include/uapi/asm/byteorder.h
delete mode 100644 arch/h8300/include/uapi/asm/errno.h
delete mode 100644 arch/h8300/include/uapi/asm/fcntl.h
delete mode 100644 arch/h8300/include/uapi/asm/ioctl.h
delete mode 100644 arch/h8300/include/uapi/asm/ioctls.h
delete mode 100644 arch/h8300/include/uapi/asm/ipcbuf.h
delete mode 100644 arch/h8300/include/uapi/asm/kvm_para.h
delete mode 100644 arch/h8300/include/uapi/asm/mman.h
delete mode 100644 arch/h8300/include/uapi/asm/msgbuf.h
delete mode 100644 arch/h8300/include/uapi/asm/param.h
delete mode 100644 arch/h8300/include/uapi/asm/poll.h
delete mode 100644 arch/h8300/include/uapi/asm/posix_types.h
delete mode 100644 arch/h8300/include/uapi/asm/ptrace.h
delete mode 100644 arch/h8300/include/uapi/asm/resource.h
delete mode 100644 arch/h8300/include/uapi/asm/sembuf.h
delete mode 100644 arch/h8300/include/uapi/asm/setup.h
delete mode 100644 arch/h8300/include/uapi/asm/shmbuf.h
delete mode 100644 arch/h8300/include/uapi/asm/sigcontext.h
delete mode 100644 arch/h8300/include/uapi/asm/siginfo.h
delete mode 100644 arch/h8300/include/uapi/asm/signal.h
delete mode 100644 arch/h8300/include/uapi/asm/socket.h
delete mode 100644 arch/h8300/include/uapi/asm/sockios.h
delete mode 100644 arch/h8300/include/uapi/asm/stat.h
delete mode 100644 arch/h8300/include/uapi/asm/statfs.h
delete mode 100644 arch/h8300/include/uapi/asm/swab.h
delete mode 100644 arch/h8300/include/uapi/asm/termbits.h
delete mode 100644 arch/h8300/include/uapi/asm/termios.h
delete mode 100644 arch/h8300/include/uapi/asm/types.h
delete mode 100644 arch/h8300/include/uapi/asm/unistd.h
delete mode 100644 arch/h8300/kernel/Makefile
delete mode 100644 arch/h8300/kernel/asm-offsets.c
delete mode 100644 arch/h8300/kernel/entry.S
delete mode 100644 arch/h8300/kernel/gpio.c
delete mode 100644 arch/h8300/kernel/h8300_ksyms.c
delete mode 100644 arch/h8300/kernel/irq.c
delete mode 100644 arch/h8300/kernel/module.c
delete mode 100644 arch/h8300/kernel/process.c
delete mode 100644 arch/h8300/kernel/ptrace.c
delete mode 100644 arch/h8300/kernel/setup.c
delete mode 100644 arch/h8300/kernel/signal.c
delete mode 100644 arch/h8300/kernel/sys_h8300.c
delete mode 100644 arch/h8300/kernel/syscalls.S
delete mode 100644 arch/h8300/kernel/time.c
delete mode 100644 arch/h8300/kernel/timer/Makefile
delete mode 100644 arch/h8300/kernel/timer/itu.c
delete mode 100644 arch/h8300/kernel/timer/timer16.c
delete mode 100644 arch/h8300/kernel/timer/timer8.c
delete mode 100644 arch/h8300/kernel/timer/tpu.c
delete mode 100644 arch/h8300/kernel/traps.c
delete mode 100644 arch/h8300/kernel/vmlinux.lds.S
delete mode 100644 arch/h8300/lib/Makefile
delete mode 100644 arch/h8300/lib/abs.S
delete mode 100644 arch/h8300/lib/ashrdi3.c
delete mode 100644 arch/h8300/lib/checksum.c
delete mode 100644 arch/h8300/lib/memcpy.S
delete mode 100644 arch/h8300/lib/memset.S
delete mode 100644 arch/h8300/lib/romfs.S
delete mode 100644 arch/h8300/mm/Makefile
delete mode 100644 arch/h8300/mm/fault.c
delete mode 100644 arch/h8300/mm/init.c
delete mode 100644 arch/h8300/mm/kmap.c
delete mode 100644 arch/h8300/mm/memory.c
delete mode 100644 arch/h8300/platform/h8300h/Makefile
delete mode 100644 arch/h8300/platform/h8300h/aki3068net/Makefile
delete mode 100644 arch/h8300/platform/h8300h/aki3068net/crt0_ram.S
delete mode 100644 arch/h8300/platform/h8300h/generic/Makefile
delete mode 100644 arch/h8300/platform/h8300h/generic/crt0_ram.S
delete mode 100644 arch/h8300/platform/h8300h/generic/crt0_rom.S
delete mode 100644 arch/h8300/platform/h8300h/h8max/Makefile
delete mode 100644 arch/h8300/platform/h8300h/h8max/crt0_ram.S
delete mode 100644 arch/h8300/platform/h8300h/irq.c
delete mode 100644 arch/h8300/platform/h8300h/ptrace_h8300h.c
delete mode 100644 arch/h8300/platform/h8s/Makefile
delete mode 100644 arch/h8300/platform/h8s/edosk2674/Makefile
delete mode 100644 arch/h8300/platform/h8s/edosk2674/crt0_ram.S
delete mode 100644 arch/h8300/platform/h8s/edosk2674/crt0_rom.S
delete mode 100644 arch/h8300/platform/h8s/generic/Makefile
delete mode 100644 arch/h8300/platform/h8s/generic/crt0_ram.S
delete mode 100644 arch/h8300/platform/h8s/generic/crt0_rom.S
delete mode 100644 arch/h8300/platform/h8s/irq.c
delete mode 100644 arch/h8300/platform/h8s/ptrace_h8s.c
delete mode 100644 drivers/ide/ide-h8300.c
delete mode 100644 drivers/net/ethernet/8390/ne-h8300.c
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 1/7] Drop support for Renesys H8/300 (h8300) architecture
2013-08-30 16:40 [PATCH 0/7] Drop support for Renesys H8/300 architecture Guenter Roeck
@ 2013-08-30 16:40 ` Guenter Roeck
2013-08-30 23:01 ` Sergei Shtylyov
2013-08-30 16:40 ` [PATCH 2/7] ide: Drop H8/300 driver Guenter Roeck
` (7 subsequent siblings)
8 siblings, 1 reply; 18+ messages in thread
From: Guenter Roeck @ 2013-08-30 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: linux-ide, netdev, linux-watchdog, Wim Van Sebroeck,
David S. Miller, Al Viro, Eric Paris, Greg Kroah-Hartman,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell,
Linus Torvalds, Guenter Roeck
H8/300 has been dead for several years, and the kernel for it
has not compiled for ages. Drop support for it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
Documentation/scheduler/sched-arch.txt | 5 -
arch/h8300/Kconfig | 109 ------
arch/h8300/Kconfig.cpu | 171 ---------
arch/h8300/Kconfig.debug | 68 ----
arch/h8300/Kconfig.ide | 44 ---
arch/h8300/Makefile | 71 ----
arch/h8300/README | 38 --
arch/h8300/boot/Makefile | 22 --
arch/h8300/boot/compressed/Makefile | 37 --
arch/h8300/boot/compressed/head.S | 47 ---
arch/h8300/boot/compressed/misc.c | 180 ---------
arch/h8300/boot/compressed/vmlinux.lds | 32 --
arch/h8300/boot/compressed/vmlinux.scr | 9 -
arch/h8300/defconfig | 42 --
arch/h8300/include/asm/Kbuild | 8 -
arch/h8300/include/asm/asm-offsets.h | 1 -
arch/h8300/include/asm/atomic.h | 146 -------
arch/h8300/include/asm/barrier.h | 29 --
arch/h8300/include/asm/bitops.h | 211 ----------
arch/h8300/include/asm/bootinfo.h | 2 -
arch/h8300/include/asm/bug.h | 12 -
arch/h8300/include/asm/bugs.h | 16 -
arch/h8300/include/asm/cache.h | 13 -
arch/h8300/include/asm/cachectl.h | 14 -
arch/h8300/include/asm/cacheflush.h | 40 --
arch/h8300/include/asm/checksum.h | 102 -----
arch/h8300/include/asm/cmpxchg.h | 60 ---
arch/h8300/include/asm/cputime.h | 6 -
arch/h8300/include/asm/current.h | 25 --
arch/h8300/include/asm/dbg.h | 2 -
arch/h8300/include/asm/delay.h | 38 --
arch/h8300/include/asm/device.h | 7 -
arch/h8300/include/asm/div64.h | 1 -
arch/h8300/include/asm/dma.h | 15 -
arch/h8300/include/asm/elf.h | 101 -----
arch/h8300/include/asm/emergency-restart.h | 6 -
arch/h8300/include/asm/fb.h | 12 -
arch/h8300/include/asm/flat.h | 26 --
arch/h8300/include/asm/fpu.h | 1 -
arch/h8300/include/asm/ftrace.h | 1 -
arch/h8300/include/asm/futex.h | 6 -
arch/h8300/include/asm/gpio-internal.h | 52 ---
arch/h8300/include/asm/hardirq.h | 19 -
arch/h8300/include/asm/hw_irq.h | 1 -
arch/h8300/include/asm/io.h | 358 -----------------
arch/h8300/include/asm/irq.h | 49 ---
arch/h8300/include/asm/irq_regs.h | 1 -
arch/h8300/include/asm/irqflags.h | 43 ---
arch/h8300/include/asm/kdebug.h | 1 -
arch/h8300/include/asm/kmap_types.h | 6 -
arch/h8300/include/asm/local.h | 6 -
arch/h8300/include/asm/local64.h | 1 -
arch/h8300/include/asm/mc146818rtc.h | 9 -
arch/h8300/include/asm/mmu_context.h | 32 --
arch/h8300/include/asm/mutex.h | 9 -
arch/h8300/include/asm/page.h | 78 ----
arch/h8300/include/asm/page_offset.h | 3 -
arch/h8300/include/asm/param.h | 9 -
arch/h8300/include/asm/pci.h | 19 -
arch/h8300/include/asm/percpu.h | 6 -
arch/h8300/include/asm/pgalloc.h | 8 -
arch/h8300/include/asm/pgtable.h | 73 ----
arch/h8300/include/asm/processor.h | 139 -------
arch/h8300/include/asm/ptrace.h | 33 --
arch/h8300/include/asm/regs267x.h | 336 ----------------
arch/h8300/include/asm/regs306x.h | 212 -----------
arch/h8300/include/asm/scatterlist.h | 6 -
arch/h8300/include/asm/sections.h | 6 -
arch/h8300/include/asm/segment.h | 49 ---
arch/h8300/include/asm/sh_bios.h | 29 --
arch/h8300/include/asm/shm.h | 31 --
arch/h8300/include/asm/shmparam.h | 6 -
arch/h8300/include/asm/signal.h | 24 --
arch/h8300/include/asm/smp.h | 1 -
arch/h8300/include/asm/spinlock.h | 6 -
arch/h8300/include/asm/string.h | 44 ---
arch/h8300/include/asm/switch_to.h | 50 ---
arch/h8300/include/asm/target_time.h | 4 -
arch/h8300/include/asm/termios.h | 50 ---
arch/h8300/include/asm/thread_info.h | 103 -----
arch/h8300/include/asm/timer.h | 25 --
arch/h8300/include/asm/timex.h | 19 -
arch/h8300/include/asm/tlb.h | 8 -
arch/h8300/include/asm/tlbflush.h | 55 ---
arch/h8300/include/asm/topology.h | 6 -
arch/h8300/include/asm/traps.h | 37 --
arch/h8300/include/asm/types.h | 9 -
arch/h8300/include/asm/uaccess.h | 163 --------
arch/h8300/include/asm/ucontext.h | 12 -
arch/h8300/include/asm/unaligned.h | 11 -
arch/h8300/include/asm/unistd.h | 36 --
arch/h8300/include/asm/user.h | 75 ----
arch/h8300/include/asm/virtconvert.h | 20 -
arch/h8300/include/uapi/asm/Kbuild | 34 --
arch/h8300/include/uapi/asm/auxvec.h | 4 -
arch/h8300/include/uapi/asm/bitsperlong.h | 1 -
arch/h8300/include/uapi/asm/byteorder.h | 6 -
arch/h8300/include/uapi/asm/errno.h | 6 -
arch/h8300/include/uapi/asm/fcntl.h | 11 -
arch/h8300/include/uapi/asm/ioctl.h | 1 -
arch/h8300/include/uapi/asm/ioctls.h | 8 -
arch/h8300/include/uapi/asm/ipcbuf.h | 1 -
arch/h8300/include/uapi/asm/kvm_para.h | 1 -
arch/h8300/include/uapi/asm/mman.h | 1 -
arch/h8300/include/uapi/asm/msgbuf.h | 31 --
arch/h8300/include/uapi/asm/param.h | 16 -
arch/h8300/include/uapi/asm/poll.h | 11 -
arch/h8300/include/uapi/asm/posix_types.h | 26 --
arch/h8300/include/uapi/asm/ptrace.h | 44 ---
arch/h8300/include/uapi/asm/resource.h | 6 -
arch/h8300/include/uapi/asm/sembuf.h | 25 --
arch/h8300/include/uapi/asm/setup.h | 6 -
arch/h8300/include/uapi/asm/shmbuf.h | 42 --
arch/h8300/include/uapi/asm/sigcontext.h | 18 -
arch/h8300/include/uapi/asm/siginfo.h | 6 -
arch/h8300/include/uapi/asm/signal.h | 115 ------
arch/h8300/include/uapi/asm/socket.h | 79 ----
arch/h8300/include/uapi/asm/sockios.h | 13 -
arch/h8300/include/uapi/asm/stat.h | 78 ----
arch/h8300/include/uapi/asm/statfs.h | 6 -
arch/h8300/include/uapi/asm/swab.h | 10 -
arch/h8300/include/uapi/asm/termbits.h | 201 ----------
arch/h8300/include/uapi/asm/termios.h | 44 ---
arch/h8300/include/uapi/asm/types.h | 1 -
arch/h8300/include/uapi/asm/unistd.h | 330 ----------------
arch/h8300/kernel/Makefile | 12 -
arch/h8300/kernel/asm-offsets.c | 60 ---
arch/h8300/kernel/entry.S | 402 --------------------
arch/h8300/kernel/gpio.c | 178 ---------
arch/h8300/kernel/h8300_ksyms.c | 100 -----
arch/h8300/kernel/irq.c | 165 --------
arch/h8300/kernel/module.c | 75 ----
arch/h8300/kernel/process.c | 154 --------
arch/h8300/kernel/ptrace.c | 168 --------
arch/h8300/kernel/setup.c | 242 ------------
arch/h8300/kernel/signal.c | 444 ----------------------
arch/h8300/kernel/sys_h8300.c | 48 ---
arch/h8300/kernel/syscalls.S | 338 ----------------
arch/h8300/kernel/time.c | 66 ----
arch/h8300/kernel/timer/Makefile | 6 -
arch/h8300/kernel/timer/itu.c | 82 ----
arch/h8300/kernel/timer/timer16.c | 77 ----
arch/h8300/kernel/timer/timer8.c | 102 -----
arch/h8300/kernel/timer/tpu.c | 100 -----
arch/h8300/kernel/traps.c | 166 --------
arch/h8300/kernel/vmlinux.lds.S | 157 --------
arch/h8300/lib/Makefile | 5 -
arch/h8300/lib/abs.S | 21 -
arch/h8300/lib/ashrdi3.c | 63 ---
arch/h8300/lib/checksum.c | 164 --------
arch/h8300/lib/memcpy.S | 84 ----
arch/h8300/lib/memset.S | 61 ---
arch/h8300/lib/romfs.S | 57 ---
arch/h8300/mm/Makefile | 5 -
arch/h8300/mm/fault.c | 56 ---
arch/h8300/mm/init.c | 155 --------
arch/h8300/mm/kmap.c | 58 ---
arch/h8300/mm/memory.c | 54 ---
arch/h8300/platform/h8300h/Makefile | 7 -
arch/h8300/platform/h8300h/aki3068net/Makefile | 5 -
arch/h8300/platform/h8300h/aki3068net/crt0_ram.S | 110 ------
arch/h8300/platform/h8300h/generic/Makefile | 5 -
arch/h8300/platform/h8300h/generic/crt0_ram.S | 107 ------
arch/h8300/platform/h8300h/generic/crt0_rom.S | 122 ------
arch/h8300/platform/h8300h/h8max/Makefile | 5 -
arch/h8300/platform/h8300h/h8max/crt0_ram.S | 110 ------
arch/h8300/platform/h8300h/irq.c | 82 ----
arch/h8300/platform/h8300h/ptrace_h8300h.c | 284 --------------
arch/h8300/platform/h8s/Makefile | 7 -
arch/h8300/platform/h8s/edosk2674/Makefile | 5 -
arch/h8300/platform/h8s/edosk2674/crt0_ram.S | 130 -------
arch/h8300/platform/h8s/edosk2674/crt0_rom.S | 186 ---------
arch/h8300/platform/h8s/generic/Makefile | 5 -
arch/h8300/platform/h8s/generic/crt0_ram.S | 127 -------
arch/h8300/platform/h8s/generic/crt0_rom.S | 128 -------
arch/h8300/platform/h8s/irq.c | 104 -----
arch/h8300/platform/h8s/ptrace_h8s.c | 84 ----
include/linux/serial_sci.h | 2 +-
tools/testing/ktest/examples/crosstests.conf | 6 -
179 files changed, 1 insertion(+), 10891 deletions(-)
delete mode 100644 arch/h8300/Kconfig
delete mode 100644 arch/h8300/Kconfig.cpu
delete mode 100644 arch/h8300/Kconfig.debug
delete mode 100644 arch/h8300/Kconfig.ide
delete mode 100644 arch/h8300/Makefile
delete mode 100644 arch/h8300/README
delete mode 100644 arch/h8300/boot/Makefile
delete mode 100644 arch/h8300/boot/compressed/Makefile
delete mode 100644 arch/h8300/boot/compressed/head.S
delete mode 100644 arch/h8300/boot/compressed/misc.c
delete mode 100644 arch/h8300/boot/compressed/vmlinux.lds
delete mode 100644 arch/h8300/boot/compressed/vmlinux.scr
delete mode 100644 arch/h8300/defconfig
delete mode 100644 arch/h8300/include/asm/Kbuild
delete mode 100644 arch/h8300/include/asm/asm-offsets.h
delete mode 100644 arch/h8300/include/asm/atomic.h
delete mode 100644 arch/h8300/include/asm/barrier.h
delete mode 100644 arch/h8300/include/asm/bitops.h
delete mode 100644 arch/h8300/include/asm/bootinfo.h
delete mode 100644 arch/h8300/include/asm/bug.h
delete mode 100644 arch/h8300/include/asm/bugs.h
delete mode 100644 arch/h8300/include/asm/cache.h
delete mode 100644 arch/h8300/include/asm/cachectl.h
delete mode 100644 arch/h8300/include/asm/cacheflush.h
delete mode 100644 arch/h8300/include/asm/checksum.h
delete mode 100644 arch/h8300/include/asm/cmpxchg.h
delete mode 100644 arch/h8300/include/asm/cputime.h
delete mode 100644 arch/h8300/include/asm/current.h
delete mode 100644 arch/h8300/include/asm/dbg.h
delete mode 100644 arch/h8300/include/asm/delay.h
delete mode 100644 arch/h8300/include/asm/device.h
delete mode 100644 arch/h8300/include/asm/div64.h
delete mode 100644 arch/h8300/include/asm/dma.h
delete mode 100644 arch/h8300/include/asm/elf.h
delete mode 100644 arch/h8300/include/asm/emergency-restart.h
delete mode 100644 arch/h8300/include/asm/fb.h
delete mode 100644 arch/h8300/include/asm/flat.h
delete mode 100644 arch/h8300/include/asm/fpu.h
delete mode 100644 arch/h8300/include/asm/ftrace.h
delete mode 100644 arch/h8300/include/asm/futex.h
delete mode 100644 arch/h8300/include/asm/gpio-internal.h
delete mode 100644 arch/h8300/include/asm/hardirq.h
delete mode 100644 arch/h8300/include/asm/hw_irq.h
delete mode 100644 arch/h8300/include/asm/io.h
delete mode 100644 arch/h8300/include/asm/irq.h
delete mode 100644 arch/h8300/include/asm/irq_regs.h
delete mode 100644 arch/h8300/include/asm/irqflags.h
delete mode 100644 arch/h8300/include/asm/kdebug.h
delete mode 100644 arch/h8300/include/asm/kmap_types.h
delete mode 100644 arch/h8300/include/asm/local.h
delete mode 100644 arch/h8300/include/asm/local64.h
delete mode 100644 arch/h8300/include/asm/mc146818rtc.h
delete mode 100644 arch/h8300/include/asm/mmu_context.h
delete mode 100644 arch/h8300/include/asm/mutex.h
delete mode 100644 arch/h8300/include/asm/page.h
delete mode 100644 arch/h8300/include/asm/page_offset.h
delete mode 100644 arch/h8300/include/asm/param.h
delete mode 100644 arch/h8300/include/asm/pci.h
delete mode 100644 arch/h8300/include/asm/percpu.h
delete mode 100644 arch/h8300/include/asm/pgalloc.h
delete mode 100644 arch/h8300/include/asm/pgtable.h
delete mode 100644 arch/h8300/include/asm/processor.h
delete mode 100644 arch/h8300/include/asm/ptrace.h
delete mode 100644 arch/h8300/include/asm/regs267x.h
delete mode 100644 arch/h8300/include/asm/regs306x.h
delete mode 100644 arch/h8300/include/asm/scatterlist.h
delete mode 100644 arch/h8300/include/asm/sections.h
delete mode 100644 arch/h8300/include/asm/segment.h
delete mode 100644 arch/h8300/include/asm/sh_bios.h
delete mode 100644 arch/h8300/include/asm/shm.h
delete mode 100644 arch/h8300/include/asm/shmparam.h
delete mode 100644 arch/h8300/include/asm/signal.h
delete mode 100644 arch/h8300/include/asm/smp.h
delete mode 100644 arch/h8300/include/asm/spinlock.h
delete mode 100644 arch/h8300/include/asm/string.h
delete mode 100644 arch/h8300/include/asm/switch_to.h
delete mode 100644 arch/h8300/include/asm/target_time.h
delete mode 100644 arch/h8300/include/asm/termios.h
delete mode 100644 arch/h8300/include/asm/thread_info.h
delete mode 100644 arch/h8300/include/asm/timer.h
delete mode 100644 arch/h8300/include/asm/timex.h
delete mode 100644 arch/h8300/include/asm/tlb.h
delete mode 100644 arch/h8300/include/asm/tlbflush.h
delete mode 100644 arch/h8300/include/asm/topology.h
delete mode 100644 arch/h8300/include/asm/traps.h
delete mode 100644 arch/h8300/include/asm/types.h
delete mode 100644 arch/h8300/include/asm/uaccess.h
delete mode 100644 arch/h8300/include/asm/ucontext.h
delete mode 100644 arch/h8300/include/asm/unaligned.h
delete mode 100644 arch/h8300/include/asm/unistd.h
delete mode 100644 arch/h8300/include/asm/user.h
delete mode 100644 arch/h8300/include/asm/virtconvert.h
delete mode 100644 arch/h8300/include/uapi/asm/Kbuild
delete mode 100644 arch/h8300/include/uapi/asm/auxvec.h
delete mode 100644 arch/h8300/include/uapi/asm/bitsperlong.h
delete mode 100644 arch/h8300/include/uapi/asm/byteorder.h
delete mode 100644 arch/h8300/include/uapi/asm/errno.h
delete mode 100644 arch/h8300/include/uapi/asm/fcntl.h
delete mode 100644 arch/h8300/include/uapi/asm/ioctl.h
delete mode 100644 arch/h8300/include/uapi/asm/ioctls.h
delete mode 100644 arch/h8300/include/uapi/asm/ipcbuf.h
delete mode 100644 arch/h8300/include/uapi/asm/kvm_para.h
delete mode 100644 arch/h8300/include/uapi/asm/mman.h
delete mode 100644 arch/h8300/include/uapi/asm/msgbuf.h
delete mode 100644 arch/h8300/include/uapi/asm/param.h
delete mode 100644 arch/h8300/include/uapi/asm/poll.h
delete mode 100644 arch/h8300/include/uapi/asm/posix_types.h
delete mode 100644 arch/h8300/include/uapi/asm/ptrace.h
delete mode 100644 arch/h8300/include/uapi/asm/resource.h
delete mode 100644 arch/h8300/include/uapi/asm/sembuf.h
delete mode 100644 arch/h8300/include/uapi/asm/setup.h
delete mode 100644 arch/h8300/include/uapi/asm/shmbuf.h
delete mode 100644 arch/h8300/include/uapi/asm/sigcontext.h
delete mode 100644 arch/h8300/include/uapi/asm/siginfo.h
delete mode 100644 arch/h8300/include/uapi/asm/signal.h
delete mode 100644 arch/h8300/include/uapi/asm/socket.h
delete mode 100644 arch/h8300/include/uapi/asm/sockios.h
delete mode 100644 arch/h8300/include/uapi/asm/stat.h
delete mode 100644 arch/h8300/include/uapi/asm/statfs.h
delete mode 100644 arch/h8300/include/uapi/asm/swab.h
delete mode 100644 arch/h8300/include/uapi/asm/termbits.h
delete mode 100644 arch/h8300/include/uapi/asm/termios.h
delete mode 100644 arch/h8300/include/uapi/asm/types.h
delete mode 100644 arch/h8300/include/uapi/asm/unistd.h
delete mode 100644 arch/h8300/kernel/Makefile
delete mode 100644 arch/h8300/kernel/asm-offsets.c
delete mode 100644 arch/h8300/kernel/entry.S
delete mode 100644 arch/h8300/kernel/gpio.c
delete mode 100644 arch/h8300/kernel/h8300_ksyms.c
delete mode 100644 arch/h8300/kernel/irq.c
delete mode 100644 arch/h8300/kernel/module.c
delete mode 100644 arch/h8300/kernel/process.c
delete mode 100644 arch/h8300/kernel/ptrace.c
delete mode 100644 arch/h8300/kernel/setup.c
delete mode 100644 arch/h8300/kernel/signal.c
delete mode 100644 arch/h8300/kernel/sys_h8300.c
delete mode 100644 arch/h8300/kernel/syscalls.S
delete mode 100644 arch/h8300/kernel/time.c
delete mode 100644 arch/h8300/kernel/timer/Makefile
delete mode 100644 arch/h8300/kernel/timer/itu.c
delete mode 100644 arch/h8300/kernel/timer/timer16.c
delete mode 100644 arch/h8300/kernel/timer/timer8.c
delete mode 100644 arch/h8300/kernel/timer/tpu.c
delete mode 100644 arch/h8300/kernel/traps.c
delete mode 100644 arch/h8300/kernel/vmlinux.lds.S
delete mode 100644 arch/h8300/lib/Makefile
delete mode 100644 arch/h8300/lib/abs.S
delete mode 100644 arch/h8300/lib/ashrdi3.c
delete mode 100644 arch/h8300/lib/checksum.c
delete mode 100644 arch/h8300/lib/memcpy.S
delete mode 100644 arch/h8300/lib/memset.S
delete mode 100644 arch/h8300/lib/romfs.S
delete mode 100644 arch/h8300/mm/Makefile
delete mode 100644 arch/h8300/mm/fault.c
delete mode 100644 arch/h8300/mm/init.c
delete mode 100644 arch/h8300/mm/kmap.c
delete mode 100644 arch/h8300/mm/memory.c
delete mode 100644 arch/h8300/platform/h8300h/Makefile
delete mode 100644 arch/h8300/platform/h8300h/aki3068net/Makefile
delete mode 100644 arch/h8300/platform/h8300h/aki3068net/crt0_ram.S
delete mode 100644 arch/h8300/platform/h8300h/generic/Makefile
delete mode 100644 arch/h8300/platform/h8300h/generic/crt0_ram.S
delete mode 100644 arch/h8300/platform/h8300h/generic/crt0_rom.S
delete mode 100644 arch/h8300/platform/h8300h/h8max/Makefile
delete mode 100644 arch/h8300/platform/h8300h/h8max/crt0_ram.S
delete mode 100644 arch/h8300/platform/h8300h/irq.c
delete mode 100644 arch/h8300/platform/h8300h/ptrace_h8300h.c
delete mode 100644 arch/h8300/platform/h8s/Makefile
delete mode 100644 arch/h8300/platform/h8s/edosk2674/Makefile
delete mode 100644 arch/h8300/platform/h8s/edosk2674/crt0_ram.S
delete mode 100644 arch/h8300/platform/h8s/edosk2674/crt0_rom.S
delete mode 100644 arch/h8300/platform/h8s/generic/Makefile
delete mode 100644 arch/h8300/platform/h8s/generic/crt0_ram.S
delete mode 100644 arch/h8300/platform/h8s/generic/crt0_rom.S
delete mode 100644 arch/h8300/platform/h8s/irq.c
delete mode 100644 arch/h8300/platform/h8s/ptrace_h8s.c
diff --git a/Documentation/scheduler/sched-arch.txt b/Documentation/scheduler/sched-arch.txt
index b1b8587..9290de7 100644
--- a/Documentation/scheduler/sched-arch.txt
+++ b/Documentation/scheduler/sched-arch.txt
@@ -65,11 +65,6 @@ Possible arch/ problems
Possible arch problems I found (and either tried to fix or didn't):
-h8300 - Is such sleeping racy vs interrupts? (See #4a).
- The H8/300 manual I found indicates yes, however disabling IRQs
- over the sleep mean only NMIs can wake it up, so can't fix easily
- without doing spin waiting.
-
ia64 - is safe_halt call racy vs interrupts? (does it sleep?) (See #4a)
sh64 - Is sleeping racy vs interrupts? (See #4a)
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
deleted file mode 100644
index 3d6759e..0000000
--- a/arch/h8300/Kconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-config H8300
- bool
- default y
- select HAVE_IDE
- select HAVE_GENERIC_HARDIRQS
- select GENERIC_ATOMIC64
- select HAVE_UID16
- select VIRT_TO_BUS
- select ARCH_WANT_IPC_PARSE_VERSION
- select GENERIC_IRQ_SHOW
- select GENERIC_CPU_DEVICES
- select MODULES_USE_ELF_RELA
- select OLD_SIGSUSPEND3
- select OLD_SIGACTION
- select HAVE_UNDERSCORE_SYMBOL_PREFIX
-
-config MMU
- bool
- default n
-
-config SWAP
- bool
- default n
-
-config ZONE_DMA
- bool
- default y
-
-config FPU
- bool
- default n
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
- default n
-
-config ARCH_HAS_ILOG2_U32
- bool
- default n
-
-config ARCH_HAS_ILOG2_U64
- bool
- default n
-
-config GENERIC_HWEIGHT
- bool
- default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config GENERIC_BUG
- bool
- depends on BUG
-
-config TIME_LOW_RES
- bool
- default y
-
-config NO_IOPORT
- def_bool y
-
-config NO_DMA
- def_bool y
-
-config ISA
- bool
- default y
-
-config PCI
- bool
- default n
-
-config HZ
- int
- default 100
-
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
-source "arch/h8300/Kconfig.cpu"
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "arch/h8300/Kconfig.ide"
-
-source "fs/Kconfig"
-
-source "arch/h8300/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
deleted file mode 100644
index cdee771..0000000
--- a/arch/h8300/Kconfig.cpu
+++ /dev/null
@@ -1,171 +0,0 @@
-menu "Processor type and features"
-
-choice
- prompt "H8/300 platform"
- default H8300H_GENERIC
-
-config H8300H_GENERIC
- bool "H8/300H Generic"
- help
- H8/300H CPU Generic Hardware Support
-
-config H8300H_AKI3068NET
- bool "AE-3068/69"
- select H83068
- help
- AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
- More Information. (Japanese Only)
- <http://akizukidenshi.com/catalog/default.aspx>
- AE-3068/69 Evaluation Board Support
- More Information.
- <http://www.microtronique.com/ae3069lan.htm>
-
-config H8300H_H8MAX
- bool "H8MAX"
- select H83068
- help
- H8MAX Evaluation Board Support
- More Information. (Japanese Only)
- <http://strawberry-linux.com/h8/index.html>
-
-config H8300H_SIM
- bool "H8/300H Simulator"
- select H83007
- help
- GDB Simulator Support
- More Information.
- <http://sourceware.org/sid/>
-
-config H8S_GENERIC
- bool "H8S Generic"
- help
- H8S CPU Generic Hardware Support
-
-config H8S_EDOSK2674
- bool "EDOSK-2674"
- select H8S2678
- help
- Renesas EDOSK-2674 Evaluation Board Support
- More Information.
- <http://www.azpower.com/H8-uClinux/index.html>
- <http://www.renesas.eu/products/tools/introductory_evaluation_tools/evaluation_development_os_kits/edosk2674r/edosk2674r_software_tools_root.jsp>
-
-config H8S_SIM
- bool "H8S Simulator"
- help
- GDB Simulator Support
- More Information.
- <http://sourceware.org/sid/>
-
-endchoice
-
-choice
- prompt "CPU Selection"
-
-config H83002
- bool "H8/3001,3002,3003"
- depends on BROKEN
- select CPU_H8300H
-
-config H83007
- bool "H8/3006,3007"
- select CPU_H8300H
-
-config H83048
- bool "H8/3044,3045,3046,3047,3048,3052"
- depends on BROKEN
- select CPU_H8300H
-
-config H83068
- bool "H8/3065,3066,3067,3068,3069"
- select CPU_H8300H
-
-config H8S2678
- bool "H8S/2670,2673,2674R,2675,2676"
- select CPU_H8S
-
-endchoice
-
-config CPU_CLOCK
- int "CPU Clock Frequency (/1KHz)"
- default "20000"
- help
- CPU Clock Frequency divide to 1000
-
-choice
- prompt "Kernel executes from"
- ---help---
- Choose the memory type that the kernel will be running in.
-
-config RAMKERNEL
- bool "RAM"
- help
- The kernel will be resident in RAM when running.
-
-config ROMKERNEL
- bool "ROM"
- help
- The kernel will be resident in FLASH/ROM when running.
-endchoice
-
-
-config CPU_H8300H
- bool
- depends on (H83002 || H83007 || H83048 || H83068)
- default y
-
-config CPU_H8S
- bool
- depends on H8S2678
- default y
-
-choice
- prompt "Timer"
-config H8300_TIMER8
- bool "8bit timer (2ch cascade)"
- depends on (H83007 || H83068 || H8S2678)
-
-config H8300_TIMER16
- bool "16bit timer"
- depends on (H83007 || H83068)
-
-config H8300_ITU
- bool "ITU"
- depends on (H83002 || H83048)
-
-config H8300_TPU
- bool "TPU"
- depends on H8S2678
-endchoice
-
-if H8300_TIMER8
-choice
- prompt "Timer Channel"
-config H8300_TIMER8_CH0
- bool "Channel 0"
-config H8300_TIMER8_CH2
- bool "Channel 2"
- depends on CPU_H8300H
-endchoice
-endif
-
-config H8300_TIMER16_CH
- int "16bit timer channel (0 - 2)"
- depends on H8300_TIMER16
- range 0 2
-
-config H8300_ITU_CH
- int "ITU channel"
- depends on H8300_ITU
- range 0 4
-
-config H8300_TPU_CH
- int "TPU channel"
- depends on H8300_TPU
- range 0 4
-
-source "kernel/Kconfig.preempt"
-
-source "mm/Kconfig"
-
-endmenu
diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug
deleted file mode 100644
index e8d1b23..0000000
--- a/arch/h8300/Kconfig.debug
+++ /dev/null
@@ -1,68 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config FULLDEBUG
- bool "Full Symbolic/Source Debugging support"
- help
- Enable debugging symbols on kernel build.
-
-config HIGHPROFILE
- bool "Use fast second timer for profiling"
- help
- Use a fast secondary clock to produce profiling information.
-
-config NO_KERNEL_MSG
- bool "Suppress Kernel BUG Messages"
- help
- Do not output any debug BUG messages within the kernel.
-
-config GDB_MAGICPRINT
- bool "Message Output for GDB MagicPrint service"
- depends on (H8300H_SIM || H8S_SIM)
- help
- kernel messages output using MagicPrint service from GDB
-
-config SYSCALL_PRINT
- bool "SystemCall trace print"
- help
- output history of systemcall
-
-config GDB_DEBUG
- bool "Use gdb stub"
- depends on (!H8300H_SIM && !H8S_SIM)
- help
- gdb stub exception support
-
-config SH_STANDARD_BIOS
- bool "Use gdb protocol serial console"
- depends on (!H8300H_SIM && !H8S_SIM)
- help
- serial console output using GDB protocol.
- Require eCos/RedBoot
-
-config DEFAULT_CMDLINE
- bool "Use builtin commandline"
- default n
- help
- builtin kernel commandline enabled.
-
-config KERNEL_COMMAND
- string "Buildin command string"
- depends on DEFAULT_CMDLINE
- help
- builtin kernel commandline strings.
-
-config BLKDEV_RESERVE
- bool "BLKDEV Reserved Memory"
- default n
- help
- Reserved BLKDEV area.
-
-config BLKDEV_RESERVE_ADDRESS
- hex 'start address'
- depends on BLKDEV_RESERVE
- help
- BLKDEV start address.
-
-endmenu
diff --git a/arch/h8300/Kconfig.ide b/arch/h8300/Kconfig.ide
deleted file mode 100644
index a38a630..0000000
--- a/arch/h8300/Kconfig.ide
+++ /dev/null
@@ -1,44 +0,0 @@
-# uClinux H8/300 Target Board Selection Menu (IDE)
-
-if (H8300H_AKI3068NET)
-menu "IDE Extra configuration"
-
-config H8300_IDE_BASE
- hex "IDE register base address"
- depends on IDE
- default 0
- help
- IDE registers base address
-
-config H8300_IDE_ALT
- hex "IDE register alternate address"
- depends on IDE
- default 0
- help
- IDE alternate registers address
-
-config H8300_IDE_IRQ
- int "IDE IRQ no"
- depends on IDE
- default 0
- help
- IDE use IRQ no
-endmenu
-endif
-
-if (H8300H_H8MAX)
-config H8300_IDE_BASE
- hex
- depends on IDE
- default 0x200000
-
-config H8300_IDE_ALT
- hex
- depends on IDE
- default 0x60000c
-
-config H8300_IDE_IRQ
- int
- depends on IDE
- default 5
-endif
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
deleted file mode 100644
index a556447..0000000
--- a/arch/h8300/Makefile
+++ /dev/null
@@ -1,71 +0,0 @@
-#
-# arch/h8300/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# (C) Copyright 2002,2003 Yoshinori Sato <ysato@users.sourceforge.jp>
-#
-
-platform-$(CONFIG_CPU_H8300H) := h8300h
-platform-$(CONFIG_CPU_H8S) := h8s
-PLATFORM := $(platform-y)
-
-board-$(CONFIG_H8300H_GENERIC) := generic
-board-$(CONFIG_H8300H_AKI3068NET) := aki3068net
-board-$(CONFIG_H8300H_H8MAX) := h8max
-board-$(CONFIG_H8300H_SIM) := generic
-board-$(CONFIG_H8S_GENERIC) := generic
-board-$(CONFIG_H8S_EDOSK2674) := edosk2674
-board-$(CONFIG_H8S_SIM) := generic
-BOARD := $(board-y)
-
-model-$(CONFIG_RAMKERNEL) := ram
-model-$(CONFIG_ROMKERNEL) := rom
-MODEL := $(model-y)
-
-cflags-$(CONFIG_CPU_H8300H) := -mh
-ldflags-$(CONFIG_CPU_H8300H) := -mh8300helf
-cflags-$(CONFIG_CPU_H8S) := -ms
-ldflags-$(CONFIG_CPU_H8S) := -mh8300self
-
-KBUILD_CFLAGS += $(cflags-y)
-KBUILD_CFLAGS += -mint32 -fno-builtin
-KBUILD_CFLAGS += -g
-KBUILD_CFLAGS += -D__linux__
-KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
-KBUILD_AFLAGS += -DPLATFORM=$(PLATFORM) -DMODEL=$(MODEL) $(cflags-y)
-LDFLAGS += $(ldflags-y)
-
-CROSS_COMPILE = h8300-elf-
-LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
-head-y := arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/crt0_$(MODEL).o
-
-core-y += arch/$(ARCH)/kernel/ \
- arch/$(ARCH)/mm/
-ifdef PLATFORM
-core-y += arch/$(ARCH)/platform/$(PLATFORM)/ \
- arch/$(ARCH)/platform/$(PLATFORM)/$(BOARD)/
-endif
-
-libs-y += arch/$(ARCH)/lib/ $(LIBGCC)
-
-boot := arch/h8300/boot
-
-export MODEL PLATFORM BOARD
-
-archmrproper:
-
-archclean:
- $(Q)$(MAKE) $(clean)=$(boot)
-
-vmlinux.srec vmlinux.bin zImage: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-define archhelp
- @echo 'vmlinux.bin - Create raw binary'
- @echo 'vmlinux.srec - Create srec binary'
- @echo 'zImage - Compressed kernel image'
-endef
diff --git a/arch/h8300/README b/arch/h8300/README
deleted file mode 100644
index efa805f..0000000
--- a/arch/h8300/README
+++ /dev/null
@@ -1,38 +0,0 @@
-linux-2.6 for H8/300 README
-Yoshinori Sato <ysato@users.sourceforge.jp>
-
-* Supported CPU
-H8/300H and H8S
-
-* Supported Target
-1.simulator of GDB
- require patches.
-
-2.AE 3068/AE 3069
- more information
- MICROTRONIQUE <http://www.microtronique.com/>
- Akizuki Denshi Tsusho Ltd. <http://akizukidenshi.com/> (Japanese Only)
-
-3.H8MAX
- see http://ip-sol.jp/h8max/ (Japanese Only)
-
-4.EDOSK2674
- see http://www.eu.renesas.com/products/mpumcu/tool/edk/support/edosk2674.html
- http://www.uclinux.org/pub/uClinux/ports/h8/HITACHI-EDOSK2674-HOWTO
- http://www.azpower.com/H8-uClinux/
-
-* Toolchain Version
-gcc-3.1 or higher and patch
-see arch/h8300/tools_patch/README
-binutils-2.12 or higher
-gdb-5.2 or higher
-The environment that can compile a h8300-elf binary is necessary.
-
-* Userland Develop environment
-used h8300-elf toolchains.
-see http://www.uclinux.org/pub/uClinux/ports/h8/
-
-* A few words of thanks
-Porting to H8/300 serieses is support of Information-technology Promotion Agency, Japan.
-I thank support.
-and All developer/user.
diff --git a/arch/h8300/boot/Makefile b/arch/h8300/boot/Makefile
deleted file mode 100644
index 0bb62e0..0000000
--- a/arch/h8300/boot/Makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-# arch/h8300/boot/Makefile
-
-targets := vmlinux.srec vmlinux.bin zImage
-subdir- := compressed
-
-OBJCOPYFLAGS_vmlinux.srec := -Osrec
-OBJCOPYFLAGS_vmlinux.bin := -Obinary
-OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S
-
-$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,objcopy)
- @echo 'Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
-
-CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec
-
diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile
deleted file mode 100644
index a6c98fe..0000000
--- a/arch/h8300/boot/compressed/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# linux/arch/sh/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
-asflags-y := -traditional
-
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-
-#
-# IMAGE_OFFSET is the load offset of the compression loader
-# Assign dummy values if these 2 variables are not defined,
-# in order to suppress error message.
-#
-CONFIG_MEMORY_START ?= 0x00400000
-CONFIG_BOOT_LINK_OFFSET ?= 0x00140000
-IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET))))
-
-LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds
-
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
- $(call if_changed,ld)
- @:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300 -T
-OBJCOPYFLAGS := -O binary
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
- $(call if_changed,ld)
diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S
deleted file mode 100644
index 10e9a2d..0000000
--- a/arch/h8300/boot/compressed/head.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * linux/arch/h8300/boot/compressed/head.S
- *
- * Copyright (C) 2006 Yoshinori Sato
- */
-
- .h8300h
-#include <linux/linkage.h>
-
-#define SRAM_START 0xff4000
-
- .section .text..startup
- .global startup
-startup:
- mov.l #SRAM_START+0x8000, sp
- mov.l #__sbss, er0
- mov.l #__ebss, er1
- sub.l er0, er1
- shlr er1
- shlr er1
- sub.l er2, er2
-1:
- mov.l er2, @er0
- adds #4, er0
- dec.l #1, er1
- bne 1b
- jsr @_decompress_kernel
- jmp @0x400000
-
- .align 9
-fake_headers_as_bzImage:
- .word 0
- .ascii "HdrS" ; header signature
- .word 0x0202 ; header version number (>= 0x0105)
- ; or else old loadlin-1.5 will fail)
- .word 0 ; default_switch
- .word 0 ; SETUPSEG
- .word 0x1000
- .word 0 ; pointing to kernel version string
- .byte 0 ; = 0, old one (LILO, Loadlin,
- ; 0xTV: T=0 for LILO
- ; V = version
- .byte 1 ; Load flags bzImage=1
- .word 0x8000 ; size to move, when setup is not
- .long 0x100000 ; 0x100000 = default for big kernel
- .long 0 ; address of loaded ramdisk image
- .long 0 ; its size in bytes
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
deleted file mode 100644
index 4a1e3dd..0000000
--- a/arch/h8300/boot/compressed/misc.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/h8300/boot/compressed/misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for h8300 by Yoshinori Sato 2006
- */
-
-#include <asm/uaccess.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args) args
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n) memset ((s), 0, (n))
-
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-static unsigned insize = 0; /* valid bytes in inbuf */
-static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-static int fill_inbuf(void);
-static void flush_window(void);
-static void error(char *m);
-
-extern char input_data[];
-extern int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-
-static void error(char *m);
-
-int puts(const char *);
-
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#define HEAP_SIZE 0x10000
-
-#include "../../../../lib/inflate.c"
-
-#define SCR *((volatile unsigned char *)0xffff8a)
-#define TDR *((volatile unsigned char *)0xffff8b)
-#define SSR *((volatile unsigned char *)0xffff8c)
-
-int puts(const char *s)
-{
- return 0;
-}
-
-void* memset(void* s, int c, size_t n)
-{
- int i;
- char *ss = (char*)s;
-
- for (i=0;i<n;i++) ss[i] = c;
- return s;
-}
-
-void* memcpy(void* __dest, __const void* __src,
- size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i=0;i<__n;i++) d[i] = s[i];
- return __dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
- if (insize != 0) {
- error("ran out of input data");
- }
-
- inbuf = input_data;
- insize = input_len;
- inptr = 1;
- return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
-
-static void error(char *x)
-{
- puts("\n\n");
- puts(x);
- puts("\n\n -- System halted");
-
- while(1); /* Halt */
-}
-
-#define STACK_SIZE (4096)
-long user_stack [STACK_SIZE];
-long* stack_start = &user_stack[STACK_SIZE];
-
-void decompress_kernel(void)
-{
- output_data = 0;
- output_ptr = (unsigned long)0x400000;
- free_mem_ptr = (unsigned long)&_end;
- free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
- makecrc();
- puts("Uncompressing Linux... ");
- gunzip();
- puts("Ok, booting the kernel.\n");
-}
diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds
deleted file mode 100644
index a0a3a0e..0000000
--- a/arch/h8300/boot/compressed/vmlinux.lds
+++ /dev/null
@@ -1,32 +0,0 @@
-SECTIONS
-{
- .text :
- {
- __stext = . ;
- __text = .;
- *(.text..startup)
- *(.text)
- __etext = . ;
- }
-
- .rodata :
- {
- *(.rodata)
- }
- .data :
-
- {
- __sdata = . ;
- ___data_start = . ;
- *(.data.*)
- }
- .bss :
- {
- . = ALIGN(0x4) ;
- __sbss = . ;
- *(.bss*)
- . = ALIGN(0x4) ;
- __ebss = . ;
- __end = . ;
- }
-}
diff --git a/arch/h8300/boot/compressed/vmlinux.scr b/arch/h8300/boot/compressed/vmlinux.scr
deleted file mode 100644
index a0f6962..0000000
--- a/arch/h8300/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,9 +0,0 @@
-SECTIONS
-{
- .data : {
- _input_len = .;
- LONG(_input_data_end - _input_data) _input_data = .;
- *(.data)
- _input_data_end = .;
- }
-}
diff --git a/arch/h8300/defconfig b/arch/h8300/defconfig
deleted file mode 100644
index 042425a..0000000
--- a/arch/h8300/defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_H83007=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_UCLINUX=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
deleted file mode 100644
index 8ada3cf..0000000
--- a/arch/h8300/include/asm/Kbuild
+++ /dev/null
@@ -1,8 +0,0 @@
-
-generic-y += clkdev.h
-generic-y += exec.h
-generic-y += linkage.h
-generic-y += mmu.h
-generic-y += module.h
-generic-y += trace_clock.h
-generic-y += xor.h
diff --git a/arch/h8300/include/asm/asm-offsets.h b/arch/h8300/include/asm/asm-offsets.h
deleted file mode 100644
index d370ee3..0000000
--- a/arch/h8300/include/asm/asm-offsets.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <generated/asm-offsets.h>
diff --git a/arch/h8300/include/asm/atomic.h b/arch/h8300/include/asm/atomic.h
deleted file mode 100644
index 40901e3..0000000
--- a/arch/h8300/include/asm/atomic.h
+++ /dev/null
@@ -1,146 +0,0 @@
-#ifndef __ARCH_H8300_ATOMIC__
-#define __ARCH_H8300_ATOMIC__
-
-#include <linux/types.h>
-#include <asm/cmpxchg.h>
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-#define ATOMIC_INIT(i) { (i) }
-
-#define atomic_read(v) (*(volatile int *)&(v)->counter)
-#define atomic_set(v, i) (((v)->counter) = i)
-
-#include <linux/kernel.h>
-
-static __inline__ int atomic_add_return(int i, atomic_t *v)
-{
- unsigned long flags;
- int ret;
- local_irq_save(flags);
- ret = v->counter += i;
- local_irq_restore(flags);
- return ret;
-}
-
-#define atomic_add(i, v) atomic_add_return(i, v)
-#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
-
-static __inline__ int atomic_sub_return(int i, atomic_t *v)
-{
- unsigned long flags;
- int ret;
- local_irq_save(flags);
- ret = v->counter -= i;
- local_irq_restore(flags);
- return ret;
-}
-
-#define atomic_sub(i, v) atomic_sub_return(i, v)
-#define atomic_sub_and_test(i,v) (atomic_sub_return(i, v) == 0)
-
-static __inline__ int atomic_inc_return(atomic_t *v)
-{
- unsigned long flags;
- int ret;
- local_irq_save(flags);
- v->counter++;
- ret = v->counter;
- local_irq_restore(flags);
- return ret;
-}
-
-#define atomic_inc(v) atomic_inc_return(v)
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-static __inline__ int atomic_dec_return(atomic_t *v)
-{
- unsigned long flags;
- int ret;
- local_irq_save(flags);
- --v->counter;
- ret = v->counter;
- local_irq_restore(flags);
- return ret;
-}
-
-#define atomic_dec(v) atomic_dec_return(v)
-
-static __inline__ int atomic_dec_and_test(atomic_t *v)
-{
- unsigned long flags;
- int ret;
- local_irq_save(flags);
- --v->counter;
- ret = v->counter;
- local_irq_restore(flags);
- return ret == 0;
-}
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
- int ret;
- unsigned long flags;
-
- local_irq_save(flags);
- ret = v->counter;
- if (likely(ret == old))
- v->counter = new;
- local_irq_restore(flags);
- return ret;
-}
-
-static inline int __atomic_add_unless(atomic_t *v, int a, int u)
-{
- int ret;
- unsigned long flags;
-
- local_irq_save(flags);
- ret = v->counter;
- if (ret != u)
- v->counter += a;
- local_irq_restore(flags);
- return ret;
-}
-
-static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
-{
- __asm__ __volatile__("stc ccr,r1l\n\t"
- "orc #0x80,ccr\n\t"
- "mov.l %0,er0\n\t"
- "and.l %1,er0\n\t"
- "mov.l er0,%0\n\t"
- "ldc r1l,ccr"
- : "=m" (*v) : "g" (~(mask)) :"er0","er1");
-}
-
-static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
-{
- __asm__ __volatile__("stc ccr,r1l\n\t"
- "orc #0x80,ccr\n\t"
- "mov.l %0,er0\n\t"
- "or.l %1,er0\n\t"
- "mov.l er0,%0\n\t"
- "ldc r1l,ccr"
- : "=m" (*v) : "g" (mask) :"er0","er1");
-}
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#endif /* __ARCH_H8300_ATOMIC __ */
diff --git a/arch/h8300/include/asm/barrier.h b/arch/h8300/include/asm/barrier.h
deleted file mode 100644
index 9e0aa9f..0000000
--- a/arch/h8300/include/asm/barrier.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _H8300_BARRIER_H
-#define _H8300_BARRIER_H
-
-#define nop() asm volatile ("nop"::)
-
-/*
- * Force strict CPU ordering.
- * Not really required on H8...
- */
-#define mb() asm volatile ("" : : :"memory")
-#define rmb() asm volatile ("" : : :"memory")
-#define wmb() asm volatile ("" : : :"memory")
-#define set_mb(var, value) do { xchg(&var, value); } while (0)
-
-#define read_barrier_depends() do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while(0)
-#endif
-
-#endif /* _H8300_BARRIER_H */
diff --git a/arch/h8300/include/asm/bitops.h b/arch/h8300/include/asm/bitops.h
deleted file mode 100644
index eb34e0c..0000000
--- a/arch/h8300/include/asm/bitops.h
+++ /dev/null
@@ -1,211 +0,0 @@
-#ifndef _H8300_BITOPS_H
-#define _H8300_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- * Copyright 2002, Yoshinori Sato
- */
-
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-/*
- * Function prototypes to keep gcc -Wall happy
- */
-
-/*
- * ffz = Find First Zero in word. Undefined if no zero exists,
- * so code should check against ~0UL first..
- */
-static __inline__ unsigned long ffz(unsigned long word)
-{
- unsigned long result;
-
- result = -1;
- __asm__("1:\n\t"
- "shlr.l %2\n\t"
- "adds #1,%0\n\t"
- "bcs 1b"
- : "=r" (result)
- : "0" (result),"r" (word));
- return result;
-}
-
-#define H8300_GEN_BITOP_CONST(OP,BIT) \
- case BIT: \
- __asm__(OP " #" #BIT ",@%0"::"r"(b_addr):"memory"); \
- break;
-
-#define H8300_GEN_BITOP(FNAME,OP) \
-static __inline__ void FNAME(int nr, volatile unsigned long* addr) \
-{ \
- volatile unsigned char *b_addr; \
- b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \
- if (__builtin_constant_p(nr)) { \
- switch(nr & 7) { \
- H8300_GEN_BITOP_CONST(OP,0) \
- H8300_GEN_BITOP_CONST(OP,1) \
- H8300_GEN_BITOP_CONST(OP,2) \
- H8300_GEN_BITOP_CONST(OP,3) \
- H8300_GEN_BITOP_CONST(OP,4) \
- H8300_GEN_BITOP_CONST(OP,5) \
- H8300_GEN_BITOP_CONST(OP,6) \
- H8300_GEN_BITOP_CONST(OP,7) \
- } \
- } else { \
- __asm__(OP " %w0,@%1"::"r"(nr),"r"(b_addr):"memory"); \
- } \
-}
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
-
-H8300_GEN_BITOP(set_bit ,"bset")
-H8300_GEN_BITOP(clear_bit ,"bclr")
-H8300_GEN_BITOP(change_bit,"bnot")
-#define __set_bit(nr,addr) set_bit((nr),(addr))
-#define __clear_bit(nr,addr) clear_bit((nr),(addr))
-#define __change_bit(nr,addr) change_bit((nr),(addr))
-
-#undef H8300_GEN_BITOP
-#undef H8300_GEN_BITOP_CONST
-
-static __inline__ int test_bit(int nr, const unsigned long* addr)
-{
- return (*((volatile unsigned char *)addr +
- ((nr >> 3) ^ 3)) & (1UL << (nr & 7))) != 0;
-}
-
-#define __test_bit(nr, addr) test_bit(nr, addr)
-
-#define H8300_GEN_TEST_BITOP_CONST_INT(OP,BIT) \
- case BIT: \
- __asm__("stc ccr,%w1\n\t" \
- "orc #0x80,ccr\n\t" \
- "bld #" #BIT ",@%4\n\t" \
- OP " #" #BIT ",@%4\n\t" \
- "rotxl.l %0\n\t" \
- "ldc %w1,ccr" \
- : "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr) \
- : "0" (retval),"r" (b_addr) \
- : "memory"); \
- break;
-
-#define H8300_GEN_TEST_BITOP_CONST(OP,BIT) \
- case BIT: \
- __asm__("bld #" #BIT ",@%3\n\t" \
- OP " #" #BIT ",@%3\n\t" \
- "rotxl.l %0\n\t" \
- : "=r"(retval),"=m"(*b_addr) \
- : "0" (retval),"r" (b_addr) \
- : "memory"); \
- break;
-
-#define H8300_GEN_TEST_BITOP(FNNAME,OP) \
-static __inline__ int FNNAME(int nr, volatile void * addr) \
-{ \
- int retval = 0; \
- char ccrsave; \
- volatile unsigned char *b_addr; \
- b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \
- if (__builtin_constant_p(nr)) { \
- switch(nr & 7) { \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,0) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,1) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,2) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,3) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,4) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,5) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,6) \
- H8300_GEN_TEST_BITOP_CONST_INT(OP,7) \
- } \
- } else { \
- __asm__("stc ccr,%w1\n\t" \
- "orc #0x80,ccr\n\t" \
- "btst %w5,@%4\n\t" \
- OP " %w5,@%4\n\t" \
- "beq 1f\n\t" \
- "inc.l #1,%0\n" \
- "1:\n\t" \
- "ldc %w1,ccr" \
- : "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr) \
- : "0" (retval),"r" (b_addr),"r"(nr) \
- : "memory"); \
- } \
- return retval; \
-} \
- \
-static __inline__ int __ ## FNNAME(int nr, volatile void * addr) \
-{ \
- int retval = 0; \
- volatile unsigned char *b_addr; \
- b_addr = (volatile unsigned char *)addr + ((nr >> 3) ^ 3); \
- if (__builtin_constant_p(nr)) { \
- switch(nr & 7) { \
- H8300_GEN_TEST_BITOP_CONST(OP,0) \
- H8300_GEN_TEST_BITOP_CONST(OP,1) \
- H8300_GEN_TEST_BITOP_CONST(OP,2) \
- H8300_GEN_TEST_BITOP_CONST(OP,3) \
- H8300_GEN_TEST_BITOP_CONST(OP,4) \
- H8300_GEN_TEST_BITOP_CONST(OP,5) \
- H8300_GEN_TEST_BITOP_CONST(OP,6) \
- H8300_GEN_TEST_BITOP_CONST(OP,7) \
- } \
- } else { \
- __asm__("btst %w4,@%3\n\t" \
- OP " %w4,@%3\n\t" \
- "beq 1f\n\t" \
- "inc.l #1,%0\n" \
- "1:" \
- : "=r"(retval),"=m"(*b_addr) \
- : "0" (retval),"r" (b_addr),"r"(nr) \
- : "memory"); \
- } \
- return retval; \
-}
-
-H8300_GEN_TEST_BITOP(test_and_set_bit, "bset")
-H8300_GEN_TEST_BITOP(test_and_clear_bit, "bclr")
-H8300_GEN_TEST_BITOP(test_and_change_bit,"bnot")
-#undef H8300_GEN_TEST_BITOP_CONST
-#undef H8300_GEN_TEST_BITOP_CONST_INT
-#undef H8300_GEN_TEST_BITOP
-
-#include <asm-generic/bitops/ffs.h>
-
-static __inline__ unsigned long __ffs(unsigned long word)
-{
- unsigned long result;
-
- result = -1;
- __asm__("1:\n\t"
- "shlr.l %2\n\t"
- "adds #1,%0\n\t"
- "bcc 1b"
- : "=r" (result)
- : "0"(result),"r"(word));
- return result;
-}
-
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-#include <asm-generic/bitops/le.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-
-#endif /* __KERNEL__ */
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /* _H8300_BITOPS_H */
diff --git a/arch/h8300/include/asm/bootinfo.h b/arch/h8300/include/asm/bootinfo.h
deleted file mode 100644
index 5bed7e7..0000000
--- a/arch/h8300/include/asm/bootinfo.h
+++ /dev/null
@@ -1,2 +0,0 @@
-
-/* Nothing for h8300 */
diff --git a/arch/h8300/include/asm/bug.h b/arch/h8300/include/asm/bug.h
deleted file mode 100644
index 1e1be81..0000000
--- a/arch/h8300/include/asm/bug.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _H8300_BUG_H
-#define _H8300_BUG_H
-
-/* always true */
-#define is_valid_bugaddr(addr) (1)
-
-#include <asm-generic/bug.h>
-
-struct pt_regs;
-extern void die(const char *str, struct pt_regs *fp, unsigned long err);
-
-#endif
diff --git a/arch/h8300/include/asm/bugs.h b/arch/h8300/include/asm/bugs.h
deleted file mode 100644
index 1cb4afb..0000000
--- a/arch/h8300/include/asm/bugs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-h8300/bugs.h
- *
- * Copyright (C) 1994 Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/arch/h8300/include/asm/cache.h b/arch/h8300/include/asm/cache.h
deleted file mode 100644
index 05887a1..0000000
--- a/arch/h8300/include/asm/cache.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_H8300_CACHE_H
-#define __ARCH_H8300_CACHE_H
-
-/* bytes per L1 cache line */
-#define L1_CACHE_SHIFT 2
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-/* m68k-elf-gcc 2.95.2 doesn't like these */
-
-#define __cacheline_aligned
-#define ____cacheline_aligned
-
-#endif
diff --git a/arch/h8300/include/asm/cachectl.h b/arch/h8300/include/asm/cachectl.h
deleted file mode 100644
index c464022..0000000
--- a/arch/h8300/include/asm/cachectl.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _H8300_CACHECTL_H
-#define _H8300_CACHECTL_H
-
-/* Definitions for the cacheflush system call. */
-
-#define FLUSH_SCOPE_LINE 0 /* Flush a cache line */
-#define FLUSH_SCOPE_PAGE 0 /* Flush a page */
-#define FLUSH_SCOPE_ALL 0 /* Flush the whole cache -- superuser only */
-
-#define FLUSH_CACHE_DATA 0 /* Writeback and flush data cache */
-#define FLUSH_CACHE_INSN 0 /* Flush instruction cache */
-#define FLUSH_CACHE_BOTH 0 /* Flush both caches */
-
-#endif /* _H8300_CACHECTL_H */
diff --git a/arch/h8300/include/asm/cacheflush.h b/arch/h8300/include/asm/cacheflush.h
deleted file mode 100644
index 4cf2df2..0000000
--- a/arch/h8300/include/asm/cacheflush.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2002, Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-#ifndef _ASM_H8300_CACHEFLUSH_H
-#define _ASM_H8300_CACHEFLUSH_H
-
-/*
- * Cache handling functions
- * No Cache memory all dummy functions
- */
-
-#define flush_cache_all()
-#define flush_cache_mm(mm)
-#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma,a,b)
-#define flush_cache_page(vma,p,pfn)
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-#define flush_dcache_page(page)
-#define flush_dcache_mmap_lock(mapping)
-#define flush_dcache_mmap_unlock(mapping)
-#define flush_icache()
-#define flush_icache_page(vma,page)
-#define flush_icache_range(start,len)
-#define flush_cache_vmap(start, end)
-#define flush_cache_vunmap(start, end)
-#define cache_push_v(vaddr,len)
-#define cache_push(paddr,len)
-#define cache_clear(paddr,len)
-
-#define flush_dcache_range(a,b)
-
-#define flush_icache_user_range(vma,page,addr,len)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-
-#endif /* _ASM_H8300_CACHEFLUSH_H */
diff --git a/arch/h8300/include/asm/checksum.h b/arch/h8300/include/asm/checksum.h
deleted file mode 100644
index 98724e1..0000000
--- a/arch/h8300/include/asm/checksum.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _H8300_CHECKSUM_H
-#define _H8300_CHECKSUM_H
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- __asm__("mov.l %0,er0\n\t"
- "add.w e0,r0\n\t"
- "xor.w e0,e0\n\t"
- "rotxl.w e0\n\t"
- "add.w e0,r0\n\t"
- "sub.w e0,e0\n\t"
- "mov.l er0,%0"
- : "=r"(sum)
- : "0"(sum)
- : "er0");
- return (__force __sum16)~sum;
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- __asm__ ("sub.l er0,er0\n\t"
- "add.l %2,%0\n\t"
- "addx #0,r0l\n\t"
- "add.l %3,%0\n\t"
- "addx #0,r0l\n\t"
- "add.l %4,%0\n\t"
- "addx #0,r0l\n\t"
- "add.l er0,%0\n\t"
- "bcc 1f\n\t"
- "inc.l #1,%0\n"
- "1:"
- : "=&r" (sum)
- : "0" (sum), "r" (daddr), "r" (saddr), "r" (len + proto)
- :"er0");
- return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#endif /* _H8300_CHECKSUM_H */
diff --git a/arch/h8300/include/asm/cmpxchg.h b/arch/h8300/include/asm/cmpxchg.h
deleted file mode 100644
index cdb203e..0000000
--- a/arch/h8300/include/asm/cmpxchg.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef __ARCH_H8300_CMPXCHG__
-#define __ARCH_H8300_CMPXCHG__
-
-#include <linux/irqflags.h>
-
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
-
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-{
- unsigned long tmp, flags;
-
- local_irq_save(flags);
-
- switch (size) {
- case 1:
- __asm__ __volatile__
- ("mov.b %2,%0\n\t"
- "mov.b %1,%2"
- : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 2:
- __asm__ __volatile__
- ("mov.w %2,%0\n\t"
- "mov.w %1,%2"
- : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
- break;
- case 4:
- __asm__ __volatile__
- ("mov.l %2,%0\n\t"
- "mov.l %1,%2"
- : "=&r" (tmp) : "r" (x), "m" (*__xg(ptr)) : "memory");
- break;
- default:
- tmp = 0;
- }
- local_irq_restore(flags);
- return tmp;
-}
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-#endif /* __ARCH_H8300_CMPXCHG__ */
diff --git a/arch/h8300/include/asm/cputime.h b/arch/h8300/include/asm/cputime.h
deleted file mode 100644
index 092e187..0000000
--- a/arch/h8300/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __H8300_CPUTIME_H
-#define __H8300_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __H8300_CPUTIME_H */
diff --git a/arch/h8300/include/asm/current.h b/arch/h8300/include/asm/current.h
deleted file mode 100644
index 57d74ee..0000000
--- a/arch/h8300/include/asm/current.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _H8300_CURRENT_H
-#define _H8300_CURRENT_H
-/*
- * current.h
- * (C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com>
- * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- * rather than dedicate a register (as the m68k source does), we
- * just keep a global, we should probably just change it all to be
- * current and lose _current_task.
- */
-
-#include <linux/thread_info.h>
-#include <asm/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct *get_current(void)
-{
- return(current_thread_info()->task);
-}
-
-#define current get_current()
-
-#endif /* _H8300_CURRENT_H */
diff --git a/arch/h8300/include/asm/dbg.h b/arch/h8300/include/asm/dbg.h
deleted file mode 100644
index 2c6d1cb..0000000
--- a/arch/h8300/include/asm/dbg.h
+++ /dev/null
@@ -1,2 +0,0 @@
-#define DEBUG 1
-#define BREAK asm volatile ("trap #3")
diff --git a/arch/h8300/include/asm/delay.h b/arch/h8300/include/asm/delay.h
deleted file mode 100644
index 743beba..0000000
--- a/arch/h8300/include/asm/delay.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _H8300_DELAY_H
-#define _H8300_DELAY_H
-
-#include <asm/param.h>
-
-/*
- * Copyright (C) 2002 Yoshinori Sato <ysato@sourceforge.jp>
- *
- * Delay routines, using a pre-computed "loops_per_second" value.
- */
-
-static inline void __delay(unsigned long loops)
-{
- __asm__ __volatile__ ("1:\n\t"
- "dec.l #1,%0\n\t"
- "bne 1b"
- :"=r" (loops):"0"(loops));
-}
-
-/*
- * Use only for very small delays ( < 1 msec). Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays. This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-
-extern unsigned long loops_per_jiffy;
-
-static inline void udelay(unsigned long usecs)
-{
- usecs *= 4295; /* 2**32 / 1000000 */
- usecs /= (loops_per_jiffy*HZ);
- if (usecs)
- __delay(usecs);
-}
-
-#endif /* _H8300_DELAY_H */
diff --git a/arch/h8300/include/asm/device.h b/arch/h8300/include/asm/device.h
deleted file mode 100644
index d8f9872..0000000
--- a/arch/h8300/include/asm/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/arch/h8300/include/asm/div64.h b/arch/h8300/include/asm/div64.h
deleted file mode 100644
index 6cd978c..0000000
--- a/arch/h8300/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/arch/h8300/include/asm/dma.h b/arch/h8300/include/asm/dma.h
deleted file mode 100644
index 3edbaaa..0000000
--- a/arch/h8300/include/asm/dma.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _H8300_DMA_H
-#define _H8300_DMA_H
-
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#define MAX_DMA_CHANNELS 0
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-#endif /* _H8300_DMA_H */
diff --git a/arch/h8300/include/asm/elf.h b/arch/h8300/include/asm/elf.h
deleted file mode 100644
index 6db7124..0000000
--- a/arch/h8300/include/asm/elf.h
+++ /dev/null
@@ -1,101 +0,0 @@
-#ifndef __ASMH8300_ELF_H
-#define __ASMH8300_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-typedef unsigned long elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) ((x)->e_machine == EM_H8_300)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2MSB
-#define ELF_ARCH EM_H8_300
-#if defined(__H8300H__)
-#define ELF_CORE_EFLAGS 0x810000
-#endif
-#if defined(__H8300S__)
-#define ELF_CORE_EFLAGS 0x820000
-#endif
-
-#define ELF_PLAT_INIT(_r) _r->er1 = 0
-
-#define ELF_EXEC_PAGESIZE 4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE 0xD0000000UL
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this cpu supports. */
-
-#define ELF_HWCAP (0)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo. */
-
-#define ELF_PLATFORM (NULL)
-
-#define R_H8_NONE 0
-#define R_H8_DIR32 1
-#define R_H8_DIR32_28 2
-#define R_H8_DIR32_24 3
-#define R_H8_DIR32_16 4
-#define R_H8_DIR32U 6
-#define R_H8_DIR32U_28 7
-#define R_H8_DIR32U_24 8
-#define R_H8_DIR32U_20 9
-#define R_H8_DIR32U_16 10
-#define R_H8_DIR24 11
-#define R_H8_DIR24_20 12
-#define R_H8_DIR24_16 13
-#define R_H8_DIR24U 14
-#define R_H8_DIR24U_20 15
-#define R_H8_DIR24U_16 16
-#define R_H8_DIR16 17
-#define R_H8_DIR16U 18
-#define R_H8_DIR16S_32 19
-#define R_H8_DIR16S_28 20
-#define R_H8_DIR16S_24 21
-#define R_H8_DIR16S_20 22
-#define R_H8_DIR16S 23
-#define R_H8_DIR8 24
-#define R_H8_DIR8U 25
-#define R_H8_DIR8Z_32 26
-#define R_H8_DIR8Z_28 27
-#define R_H8_DIR8Z_24 28
-#define R_H8_DIR8Z_20 29
-#define R_H8_DIR8Z_16 30
-#define R_H8_PCREL16 31
-#define R_H8_PCREL8 32
-#define R_H8_BPOS 33
-#define R_H8_PCREL32 34
-#define R_H8_GOT32O 35
-#define R_H8_GOT16O 36
-#define R_H8_DIR16A8 59
-#define R_H8_DIR16R8 60
-#define R_H8_DIR24A8 61
-#define R_H8_DIR24R8 62
-#define R_H8_DIR32A16 63
-#define R_H8_ABS32 65
-#define R_H8_ABS32A16 127
-
-#endif
diff --git a/arch/h8300/include/asm/emergency-restart.h b/arch/h8300/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c4..0000000
--- a/arch/h8300/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/h8300/include/asm/fb.h b/arch/h8300/include/asm/fb.h
deleted file mode 100644
index c7df380..0000000
--- a/arch/h8300/include/asm/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h
deleted file mode 100644
index bd12b31..0000000
--- a/arch/h8300/include/asm/flat.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-h8300/flat.h -- uClinux flat-format executables
- */
-
-#ifndef __H8300_FLAT_H__
-#define __H8300_FLAT_H__
-
-#define flat_argvp_envp_on_stack() 1
-#define flat_old_ram_flag(flags) 1
-#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_set_persistent(relval, p) 0
-
-/*
- * on the H8 a couple of the relocations have an instruction in the
- * top byte. As there can only be 24bits of address space, we just
- * always preserve that 8bits at the top, when it isn't an instruction
- * is is 0 (davidm@snapgear.com)
- */
-
-#define flat_get_relocate_addr(rel) (rel)
-#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
- (get_unaligned(rp) & ((flags & FLAT_FLAG_GOTPIC) ? 0xffffffff: 0x00ffffff))
-#define flat_put_addr_at_rp(rp, addr, rel) \
- put_unaligned (((*(char *)(rp)) << 24) | ((addr) & 0x00ffffff), rp)
-
-#endif /* __H8300_FLAT_H__ */
diff --git a/arch/h8300/include/asm/fpu.h b/arch/h8300/include/asm/fpu.h
deleted file mode 100644
index 4fc416e..0000000
--- a/arch/h8300/include/asm/fpu.h
+++ /dev/null
@@ -1 +0,0 @@
-/* Nothing do */
diff --git a/arch/h8300/include/asm/ftrace.h b/arch/h8300/include/asm/ftrace.h
deleted file mode 100644
index 40a8c17..0000000
--- a/arch/h8300/include/asm/ftrace.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/h8300/include/asm/futex.h b/arch/h8300/include/asm/futex.h
deleted file mode 100644
index 6a332a9..0000000
--- a/arch/h8300/include/asm/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/arch/h8300/include/asm/gpio-internal.h b/arch/h8300/include/asm/gpio-internal.h
deleted file mode 100644
index a714f0c..0000000
--- a/arch/h8300/include/asm/gpio-internal.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _H8300_GPIO_H
-#define _H8300_GPIO_H
-
-#define H8300_GPIO_P1 0
-#define H8300_GPIO_P2 1
-#define H8300_GPIO_P3 2
-#define H8300_GPIO_P4 3
-#define H8300_GPIO_P5 4
-#define H8300_GPIO_P6 5
-#define H8300_GPIO_P7 6
-#define H8300_GPIO_P8 7
-#define H8300_GPIO_P9 8
-#define H8300_GPIO_PA 9
-#define H8300_GPIO_PB 10
-#define H8300_GPIO_PC 11
-#define H8300_GPIO_PD 12
-#define H8300_GPIO_PE 13
-#define H8300_GPIO_PF 14
-#define H8300_GPIO_PG 15
-#define H8300_GPIO_PH 16
-
-#define H8300_GPIO_B7 0x80
-#define H8300_GPIO_B6 0x40
-#define H8300_GPIO_B5 0x20
-#define H8300_GPIO_B4 0x10
-#define H8300_GPIO_B3 0x08
-#define H8300_GPIO_B2 0x04
-#define H8300_GPIO_B1 0x02
-#define H8300_GPIO_B0 0x01
-
-#define H8300_GPIO_INPUT 0
-#define H8300_GPIO_OUTPUT 1
-
-#define H8300_GPIO_RESERVE(port, bits) \
- h8300_reserved_gpio(port, bits)
-
-#define H8300_GPIO_FREE(port, bits) \
- h8300_free_gpio(port, bits)
-
-#define H8300_GPIO_DDR(port, bit, dir) \
- h8300_set_gpio_dir(((port) << 8) | (bit), dir)
-
-#define H8300_GPIO_GETDIR(port, bit) \
- h8300_get_gpio_dir(((port) << 8) | (bit))
-
-extern int h8300_reserved_gpio(int port, int bits);
-extern int h8300_free_gpio(int port, int bits);
-extern int h8300_set_gpio_dir(int port_bit, int dir);
-extern int h8300_get_gpio_dir(int port_bit);
-extern int h8300_init_gpio(void);
-
-#endif
diff --git a/arch/h8300/include/asm/hardirq.h b/arch/h8300/include/asm/hardirq.h
deleted file mode 100644
index c2e1aa0..0000000
--- a/arch/h8300/include/asm/hardirq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __H8300_HARDIRQ_H
-#define __H8300_HARDIRQ_H
-
-#include <asm/irq.h>
-
-#define HARDIRQ_BITS 8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-#include <asm-generic/hardirq.h>
-
-#endif
diff --git a/arch/h8300/include/asm/hw_irq.h b/arch/h8300/include/asm/hw_irq.h
deleted file mode 100644
index d75a5a1..0000000
--- a/arch/h8300/include/asm/hw_irq.h
+++ /dev/null
@@ -1 +0,0 @@
-/* Do Nothing */
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
deleted file mode 100644
index c1a8df2..0000000
--- a/arch/h8300/include/asm/io.h
+++ /dev/null
@@ -1,358 +0,0 @@
-#ifndef _H8300_IO_H
-#define _H8300_IO_H
-
-#ifdef __KERNEL__
-
-#include <asm/virtconvert.h>
-
-#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
-#include <asm/regs306x.h>
-#elif defined(CONFIG_H8S2678)
-#include <asm/regs267x.h>
-#else
-#error UNKNOWN CPU TYPE
-#endif
-
-
-/*
- * These are for ISA/PCI shared memory _only_ and should never be used
- * on any other type of memory, including Zorro memory. They are meant to
- * access the bus in the bus byte order which is little-endian!.
- *
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the m68k architecture, we just read/write the
- * memory location directly.
- */
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesirable for some devices.
- */
-
-/*
- * swap functions are sometimes needed to interface little-endian hardware
- */
-
-static inline unsigned short _swapw(volatile unsigned short v)
-{
-#ifndef H8300_IO_NOSWAP
- unsigned short r;
- __asm__("xor.b %w0,%x0\n\t"
- "xor.b %x0,%w0\n\t"
- "xor.b %w0,%x0"
- :"=r"(r)
- :"0"(v));
- return r;
-#else
- return v;
-#endif
-}
-
-static inline unsigned long _swapl(volatile unsigned long v)
-{
-#ifndef H8300_IO_NOSWAP
- unsigned long r;
- __asm__("xor.b %w0,%x0\n\t"
- "xor.b %x0,%w0\n\t"
- "xor.b %w0,%x0\n\t"
- "xor.w %e0,%f0\n\t"
- "xor.w %f0,%e0\n\t"
- "xor.w %e0,%f0\n\t"
- "xor.b %w0,%x0\n\t"
- "xor.b %x0,%w0\n\t"
- "xor.b %w0,%x0"
- :"=r"(r)
- :"0"(v));
- return r;
-#else
- return v;
-#endif
-}
-
-#define readb(addr) \
- ({ unsigned char __v = \
- *(volatile unsigned char *)((unsigned long)(addr) & 0x00ffffff); \
- __v; })
-#define readw(addr) \
- ({ unsigned short __v = \
- *(volatile unsigned short *)((unsigned long)(addr) & 0x00ffffff); \
- __v; })
-#define readl(addr) \
- ({ unsigned long __v = \
- *(volatile unsigned long *)((unsigned long)(addr) & 0x00ffffff); \
- __v; })
-
-#define writeb(b,addr) (void)((*(volatile unsigned char *) \
- ((unsigned long)(addr) & 0x00ffffff)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) \
- ((unsigned long)(addr) & 0x00ffffff)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned long *) \
- ((unsigned long)(addr) & 0x00ffffff)) = (b))
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-static inline int h8300_buswidth(unsigned int addr)
-{
- return (*(volatile unsigned char *)ABWCR & (1 << ((addr >> 21) & 7))) == 0;
-}
-
-static inline void io_outsb(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned char *ap_b = (volatile unsigned char *) addr;
- volatile unsigned short *ap_w = (volatile unsigned short *) addr;
- unsigned char *bp = (unsigned char *) buf;
-
- if(h8300_buswidth(addr) && (addr & 1)) {
- while (len--)
- *ap_w = *bp++;
- } else {
- while (len--)
- *ap_b = *bp++;
- }
-}
-
-static inline void io_outsw(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *ap = _swapw(*bp++);
-}
-
-static inline void io_outsl(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned long *ap = (volatile unsigned long *) addr;
- unsigned long *bp = (unsigned long *) buf;
- while (len--)
- *ap = _swapl(*bp++);
-}
-
-static inline void io_outsw_noswap(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *ap = *bp++;
-}
-
-static inline void io_outsl_noswap(unsigned int addr, const void *buf, int len)
-{
- volatile unsigned long *ap = (volatile unsigned long *) addr;
- unsigned long *bp = (unsigned long *) buf;
- while (len--)
- *ap = *bp++;
-}
-
-static inline void io_insb(unsigned int addr, void *buf, int len)
-{
- volatile unsigned char *ap_b;
- volatile unsigned short *ap_w;
- unsigned char *bp = (unsigned char *) buf;
-
- if(h8300_buswidth(addr)) {
- ap_w = (volatile unsigned short *)(addr & ~1);
- while (len--)
- *bp++ = *ap_w & 0xff;
- } else {
- ap_b = (volatile unsigned char *)addr;
- while (len--)
- *bp++ = *ap_b;
- }
-}
-
-static inline void io_insw(unsigned int addr, void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *bp++ = _swapw(*ap);
-}
-
-static inline void io_insl(unsigned int addr, void *buf, int len)
-{
- volatile unsigned long *ap = (volatile unsigned long *) addr;
- unsigned long *bp = (unsigned long *) buf;
- while (len--)
- *bp++ = _swapl(*ap);
-}
-
-static inline void io_insw_noswap(unsigned int addr, void *buf, int len)
-{
- volatile unsigned short *ap = (volatile unsigned short *) addr;
- unsigned short *bp = (unsigned short *) buf;
- while (len--)
- *bp++ = *ap;
-}
-
-static inline void io_insl_noswap(unsigned int addr, void *buf, int len)
-{
- volatile unsigned long *ap = (volatile unsigned long *) addr;
- unsigned long *bp = (unsigned long *) buf;
- while (len--)
- *bp++ = *ap;
-}
-
-/*
- * make the short names macros so specific devices
- * can override them as required
- */
-
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-
-#define mmiowb()
-
-#define inb(addr) ((h8300_buswidth(addr))?readw((addr) & ~1) & 0xff:readb(addr))
-#define inw(addr) _swapw(readw(addr))
-#define inl(addr) _swapl(readl(addr))
-#define outb(x,addr) ((void)((h8300_buswidth(addr) && \
- ((addr) & 1))?writew(x,(addr) & ~1):writeb(x,addr)))
-#define outw(x,addr) ((void) writew(_swapw(x),addr))
-#define outl(x,addr) ((void) writel(_swapl(x),addr))
-
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
-
-#define outsb(a,b,l) io_outsb(a,b,l)
-#define outsw(a,b,l) io_outsw(a,b,l)
-#define outsl(a,b,l) io_outsl(a,b,l)
-
-#define insb(a,b,l) io_insb(a,b,l)
-#define insw(a,b,l) io_insw(a,b,l)
-#define insl(a,b,l) io_insl(a,b,l)
-
-#define IO_SPACE_LIMIT 0xffffff
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING 0
-#define IOMAP_NOCACHE_SER 1
-#define IOMAP_NOCACHE_NONSER 2
-#define IOMAP_WRITETHROUGH 3
-
-extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
-
-static inline void *ioremap(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-extern void iounmap(void *addr);
-
-/* H8/300 internal I/O functions */
-static __inline__ unsigned char ctrl_inb(unsigned long addr)
-{
- return *(volatile unsigned char*)addr;
-}
-
-static __inline__ unsigned short ctrl_inw(unsigned long addr)
-{
- return *(volatile unsigned short*)addr;
-}
-
-static __inline__ unsigned long ctrl_inl(unsigned long addr)
-{
- return *(volatile unsigned long*)addr;
-}
-
-static __inline__ void ctrl_outb(unsigned char b, unsigned long addr)
-{
- *(volatile unsigned char*)addr = b;
-}
-
-static __inline__ void ctrl_outw(unsigned short b, unsigned long addr)
-{
- *(volatile unsigned short*)addr = b;
-}
-
-static __inline__ void ctrl_outl(unsigned long b, unsigned long addr)
-{
- *(volatile unsigned long*)addr = b;
-}
-
-static __inline__ void ctrl_bclr(int b, unsigned long addr)
-{
- if (__builtin_constant_p(b))
- switch (b) {
- case 0: __asm__("bclr #0,@%0"::"r"(addr)); break;
- case 1: __asm__("bclr #1,@%0"::"r"(addr)); break;
- case 2: __asm__("bclr #2,@%0"::"r"(addr)); break;
- case 3: __asm__("bclr #3,@%0"::"r"(addr)); break;
- case 4: __asm__("bclr #4,@%0"::"r"(addr)); break;
- case 5: __asm__("bclr #5,@%0"::"r"(addr)); break;
- case 6: __asm__("bclr #6,@%0"::"r"(addr)); break;
- case 7: __asm__("bclr #7,@%0"::"r"(addr)); break;
- }
- else
- __asm__("bclr %w0,@%1"::"r"(b), "r"(addr));
-}
-
-static __inline__ void ctrl_bset(int b, unsigned long addr)
-{
- if (__builtin_constant_p(b))
- switch (b) {
- case 0: __asm__("bset #0,@%0"::"r"(addr)); break;
- case 1: __asm__("bset #1,@%0"::"r"(addr)); break;
- case 2: __asm__("bset #2,@%0"::"r"(addr)); break;
- case 3: __asm__("bset #3,@%0"::"r"(addr)); break;
- case 4: __asm__("bset #4,@%0"::"r"(addr)); break;
- case 5: __asm__("bset #5,@%0"::"r"(addr)); break;
- case 6: __asm__("bset #6,@%0"::"r"(addr)); break;
- case 7: __asm__("bset #7,@%0"::"r"(addr)); break;
- }
- else
- __asm__("bset %w0,@%1"::"r"(b), "r"(addr));
-}
-
-/* Pages to physical address... */
-#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
-#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT)
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-#define phys_to_virt(vaddr) ((void *) (vaddr))
-#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-#endif /* __KERNEL__ */
-
-#endif /* _H8300_IO_H */
diff --git a/arch/h8300/include/asm/irq.h b/arch/h8300/include/asm/irq.h
deleted file mode 100644
index 13d7c60..0000000
--- a/arch/h8300/include/asm/irq.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _H8300_IRQ_H_
-#define _H8300_IRQ_H_
-
-#include <asm/ptrace.h>
-
-#if defined(CONFIG_CPU_H8300H)
-#define NR_IRQS 64
-#define EXT_IRQ0 12
-#define EXT_IRQ1 13
-#define EXT_IRQ2 14
-#define EXT_IRQ3 15
-#define EXT_IRQ4 16
-#define EXT_IRQ5 17
-#define EXT_IRQ6 18
-#define EXT_IRQ7 19
-#define EXT_IRQS 5
-#define IER_REGS *(volatile unsigned char *)IER
-#endif
-#if defined(CONFIG_CPU_H8S)
-#define NR_IRQS 128
-#define EXT_IRQ0 16
-#define EXT_IRQ1 17
-#define EXT_IRQ2 18
-#define EXT_IRQ3 19
-#define EXT_IRQ4 20
-#define EXT_IRQ5 21
-#define EXT_IRQ6 22
-#define EXT_IRQ7 23
-#define EXT_IRQ8 24
-#define EXT_IRQ9 25
-#define EXT_IRQ10 26
-#define EXT_IRQ11 27
-#define EXT_IRQ12 28
-#define EXT_IRQ13 29
-#define EXT_IRQ14 30
-#define EXT_IRQ15 31
-#define EXT_IRQS 15
-
-#define IER_REGS *(volatile unsigned short *)IER
-#endif
-
-static __inline__ int irq_canonicalize(int irq)
-{
- return irq;
-}
-
-typedef void (*h8300_vector)(void);
-
-#endif /* _H8300_IRQ_H_ */
diff --git a/arch/h8300/include/asm/irq_regs.h b/arch/h8300/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b..0000000
--- a/arch/h8300/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/h8300/include/asm/irqflags.h b/arch/h8300/include/asm/irqflags.h
deleted file mode 100644
index 9617cd5..0000000
--- a/arch/h8300/include/asm/irqflags.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _H8300_IRQFLAGS_H
-#define _H8300_IRQFLAGS_H
-
-static inline unsigned long arch_local_save_flags(void)
-{
- unsigned long flags;
- asm volatile ("stc ccr,%w0" : "=r" (flags));
- return flags;
-}
-
-static inline void arch_local_irq_disable(void)
-{
- asm volatile ("orc #0x80,ccr" : : : "memory");
-}
-
-static inline void arch_local_irq_enable(void)
-{
- asm volatile ("andc #0x7f,ccr" : : : "memory");
-}
-
-static inline unsigned long arch_local_irq_save(void)
-{
- unsigned long flags = arch_local_save_flags();
- arch_local_irq_disable();
- return flags;
-}
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
- asm volatile ("ldc %w0,ccr" : : "r" (flags) : "memory");
-}
-
-static inline bool arch_irqs_disabled_flags(unsigned long flags)
-{
- return (flags & 0x80) == 0x80;
-}
-
-static inline bool arch_irqs_disabled(void)
-{
- return arch_irqs_disabled_flags(arch_local_save_flags());
-}
-
-#endif /* _H8300_IRQFLAGS_H */
diff --git a/arch/h8300/include/asm/kdebug.h b/arch/h8300/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b0..0000000
--- a/arch/h8300/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/arch/h8300/include/asm/kmap_types.h b/arch/h8300/include/asm/kmap_types.h
deleted file mode 100644
index be12a71..0000000
--- a/arch/h8300/include/asm/kmap_types.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_H8300_KMAP_TYPES_H
-#define _ASM_H8300_KMAP_TYPES_H
-
-#include <asm-generic/kmap_types.h>
-
-#endif
diff --git a/arch/h8300/include/asm/local.h b/arch/h8300/include/asm/local.h
deleted file mode 100644
index fdd4efe..0000000
--- a/arch/h8300/include/asm/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_LOCAL_H_
-#define _H8300_LOCAL_H_
-
-#include <asm-generic/local.h>
-
-#endif
diff --git a/arch/h8300/include/asm/local64.h b/arch/h8300/include/asm/local64.h
deleted file mode 100644
index 36c93b5..0000000
--- a/arch/h8300/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/arch/h8300/include/asm/mc146818rtc.h b/arch/h8300/include/asm/mc146818rtc.h
deleted file mode 100644
index ab9d964..0000000
--- a/arch/h8300/include/asm/mc146818rtc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _H8300_MC146818RTC_H
-#define _H8300_MC146818RTC_H
-
-/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
-
-#endif /* _H8300_MC146818RTC_H */
diff --git a/arch/h8300/include/asm/mmu_context.h b/arch/h8300/include/asm/mmu_context.h
deleted file mode 100644
index f44b730..0000000
--- a/arch/h8300/include/asm/mmu_context.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __H8300_MMU_CONTEXT_H
-#define __H8300_MMU_CONTEXT_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
- // mm->context = virt_to_phys(mm->pgd);
- return(0);
-}
-
-#define destroy_context(mm) do { } while(0)
-#define deactivate_mm(tsk,mm) do { } while(0)
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
-{
-}
-
-static inline void activate_mm(struct mm_struct *prev_mm,
- struct mm_struct *next_mm)
-{
-}
-
-#endif
diff --git a/arch/h8300/include/asm/mutex.h b/arch/h8300/include/asm/mutex.h
deleted file mode 100644
index 458c1f7..0000000
--- a/arch/h8300/include/asm/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/arch/h8300/include/asm/page.h b/arch/h8300/include/asm/page.h
deleted file mode 100644
index 837381a..0000000
--- a/arch/h8300/include/asm/page.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef _H8300_PAGE_H
-#define _H8300_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-
-#define PAGE_SHIFT (12)
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
-
-#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr) free_page(addr)
-
-#define clear_page(page) memset((page), 0, PAGE_SIZE)
-#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(page, vaddr, pg) clear_page(page)
-#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
- alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd[16]; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((&x)->pmd[0])
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define PAGE_OFFSET (PAGE_OFFSET_RAW)
-
-#ifndef __ASSEMBLY__
-
-#define __pa(vaddr) virt_to_phys(vaddr)
-#define __va(paddr) phys_to_virt((unsigned long)paddr)
-
-#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT)
-
-#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)
-#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-#define pfn_valid(page) (page < max_mapnr)
-
-#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
-
-#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
- ((void *)(kaddr) < (void *)memory_end))
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/getorder.h>
-
-#endif /* _H8300_PAGE_H */
diff --git a/arch/h8300/include/asm/page_offset.h b/arch/h8300/include/asm/page_offset.h
deleted file mode 100644
index f870646..0000000
--- a/arch/h8300/include/asm/page_offset.h
+++ /dev/null
@@ -1,3 +0,0 @@
-
-#define PAGE_OFFSET_RAW 0x00000000
-
diff --git a/arch/h8300/include/asm/param.h b/arch/h8300/include/asm/param.h
deleted file mode 100644
index c3909e7..0000000
--- a/arch/h8300/include/asm/param.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _H8300_PARAM_H
-#define _H8300_PARAM_H
-
-#include <uapi/asm/param.h>
-
-#define HZ CONFIG_HZ
-#define USER_HZ HZ
-#define CLOCKS_PER_SEC (USER_HZ)
-#endif /* _H8300_PARAM_H */
diff --git a/arch/h8300/include/asm/pci.h b/arch/h8300/include/asm/pci.h
deleted file mode 100644
index 0b2acaa..0000000
--- a/arch/h8300/include/asm/pci.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ASM_H8300_PCI_H
-#define _ASM_H8300_PCI_H
-
-/*
- * asm-h8300/pci.h - H8/300 specific PCI declarations.
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-#define pcibios_assign_all_busses() 0
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
- /* We don't do dynamic PCI IRQ allocation */
-}
-
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-#endif /* _ASM_H8300_PCI_H */
diff --git a/arch/h8300/include/asm/percpu.h b/arch/h8300/include/asm/percpu.h
deleted file mode 100644
index 72c03e3..0000000
--- a/arch/h8300/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_H8300_PERCPU__
-#define __ARCH_H8300_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_H8300_PERCPU__ */
diff --git a/arch/h8300/include/asm/pgalloc.h b/arch/h8300/include/asm/pgalloc.h
deleted file mode 100644
index c2e89a2..0000000
--- a/arch/h8300/include/asm/pgalloc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _H8300_PGALLOC_H
-#define _H8300_PGALLOC_H
-
-#include <asm/setup.h>
-
-#define check_pgt_cache() do { } while (0)
-
-#endif /* _H8300_PGALLOC_H */
diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h
deleted file mode 100644
index 7ca20f8..0000000
--- a/arch/h8300/include/asm/pgtable.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _H8300_PGTABLE_H
-#define _H8300_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-#include <linux/slab.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/io.h>
-
-#define pgd_present(pgd) (1) /* pages are always present on NO_MM */
-#define pgd_none(pgd) (0)
-#define pgd_bad(pgd) (0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr) (1)
-#define pmd_offset(a, b) ((void *)0)
-#define pmd_none(pmd) (1)
-#define pgd_offset_k(adrdress) ((pgd_t *)0)
-#define pte_offset_kernel(dir, address) ((pte_t *)0)
-
-#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
-
-extern void paging_init(void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define __swp_type(x) (0)
-#define __swp_offset(x) (0)
-#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-static inline int pte_file(pte_t pte) { return 0; }
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr) (virt_to_page(0))
-
-/*
- * These would be in other places but having them here reduces the diffs.
- */
-extern unsigned int kobjsize(const void *objp);
-extern int is_in_rom(unsigned long);
-
-/*
- * No page table caches to initialise
- */
-#define pgtable_cache_init() do { } while (0)
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define VMALLOC_START 0
-#define VMALLOC_END 0xffffffff
-
-/*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
- */
-#define VMALLOC_START 0
-#define VMALLOC_END 0xffffffff
-
-#define arch_enter_lazy_cpu_mode() do {} while (0)
-
-#include <asm-generic/pgtable.h>
-
-#endif /* _H8300_PGTABLE_H */
diff --git a/arch/h8300/include/asm/processor.h b/arch/h8300/include/asm/processor.h
deleted file mode 100644
index 4b0ca49..0000000
--- a/arch/h8300/include/asm/processor.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * include/asm-h8300/processor.h
- *
- * Copyright (C) 2002 Yoshinori Sato
- *
- * Based on: linux/asm-m68nommu/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_H8300_PROCESSOR_H
-#define __ASM_H8300_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-
-static inline unsigned long rdusp(void) {
- extern unsigned int sw_usp;
- return(sw_usp);
-}
-
-static inline void wrusp(unsigned long usp) {
- extern unsigned int sw_usp;
- sw_usp = usp;
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#define TASK_SIZE (0xFFFFFFFFUL)
-
-#ifdef __KERNEL__
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-#endif
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE 0
-
-struct thread_struct {
- unsigned long ksp; /* kernel stack pointer */
- unsigned long usp; /* user stack pointer */
- unsigned long ccr; /* saved status register */
- unsigned long esp0; /* points to SR of stack frame */
- struct {
- unsigned short *addr;
- unsigned short inst;
- } breakinfo;
-};
-
-#define INIT_THREAD { \
- .ksp = sizeof(init_stack) + (unsigned long)init_stack, \
- .usp = 0, \
- .ccr = PS_S, \
- .esp0 = 0, \
- .breakinfo = { \
- .addr = (unsigned short *)-1, \
- .inst = 0 \
- } \
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#if defined(__H8300H__)
-#define start_thread(_regs, _pc, _usp) \
-do { \
- (_regs)->pc = (_pc); \
- (_regs)->ccr = 0x00; /* clear all flags */ \
- (_regs)->er5 = current->mm->start_data; /* GOT base */ \
- wrusp((unsigned long)(_usp) - sizeof(unsigned long)*3); \
-} while(0)
-#endif
-#if defined(__H8300S__)
-#define start_thread(_regs, _pc, _usp) \
-do { \
- (_regs)->pc = (_pc); \
- (_regs)->ccr = 0x00; /* clear kernel flag */ \
- (_regs)->exr = 0x78; /* enable all interrupts */ \
- (_regs)->er5 = current->mm->start_data; /* GOT base */ \
- /* 14 = space for retaddr(4), vector(4), er0(4) and ext(2) on stack */ \
- wrusp(((unsigned long)(_usp)) - 14); \
-} while(0)
-#endif
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-/*
- * Return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *tsk);
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) \
- ({ \
- unsigned long eip = 0; \
- if ((tsk)->thread.esp0 > PAGE_SIZE && \
- MAP_NR((tsk)->thread.esp0) < max_mapnr) \
- eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
- eip; })
-#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax() barrier()
-
-#define HARD_RESET_NOW() ({ \
- local_irq_disable(); \
- asm("jmp @@0"); \
-})
-
-#endif
diff --git a/arch/h8300/include/asm/ptrace.h b/arch/h8300/include/asm/ptrace.h
deleted file mode 100644
index c1826b9..0000000
--- a/arch/h8300/include/asm/ptrace.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _H8300_PTRACE_H
-#define _H8300_PTRACE_H
-
-#include <uapi/asm/ptrace.h>
-
-#ifndef __ASSEMBLY__
-#if defined(CONFIG_CPU_H8S)
-#endif
-#ifndef PS_S
-#define PS_S (0x10)
-#endif
-
-#if defined(__H8300H__)
-#define H8300_REGS_NO 11
-#endif
-#if defined(__H8300S__)
-#define H8300_REGS_NO 12
-#endif
-
-/* Find the stack offset for a register, relative to thread.esp0. */
-#define PT_REG(reg) ((long)&((struct pt_regs *)0)->reg)
-
-#define arch_has_single_step() (1)
-
-#define user_mode(regs) (!((regs)->ccr & PS_S))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-#define current_pt_regs() ((struct pt_regs *) \
- (THREAD_SIZE + (unsigned long)current_thread_info()) - 1)
-#define signal_pt_regs() ((struct pt_regs *)current->thread.esp0)
-#define current_user_stack_pointer() rdusp()
-#endif /* __ASSEMBLY__ */
-#endif /* _H8300_PTRACE_H */
diff --git a/arch/h8300/include/asm/regs267x.h b/arch/h8300/include/asm/regs267x.h
deleted file mode 100644
index 1bff731..0000000
--- a/arch/h8300/include/asm/regs267x.h
+++ /dev/null
@@ -1,336 +0,0 @@
-/* internal Peripherals Register address define */
-/* CPU: H8/306x */
-
-#if !defined(__REGS_H8S267x__)
-#define __REGS_H8S267x__
-
-#if defined(__KERNEL__)
-
-#define DASTCR 0xFEE01A
-#define DADR0 0xFFFFA4
-#define DADR1 0xFFFFA5
-#define DACR01 0xFFFFA6
-#define DADR2 0xFFFFA8
-#define DADR3 0xFFFFA9
-#define DACR23 0xFFFFAA
-
-#define ADDRA 0xFFFF90
-#define ADDRAH 0xFFFF90
-#define ADDRAL 0xFFFF91
-#define ADDRB 0xFFFF92
-#define ADDRBH 0xFFFF92
-#define ADDRBL 0xFFFF93
-#define ADDRC 0xFFFF94
-#define ADDRCH 0xFFFF94
-#define ADDRCL 0xFFFF95
-#define ADDRD 0xFFFF96
-#define ADDRDH 0xFFFF96
-#define ADDRDL 0xFFFF97
-#define ADDRE 0xFFFF98
-#define ADDREH 0xFFFF98
-#define ADDREL 0xFFFF99
-#define ADDRF 0xFFFF9A
-#define ADDRFH 0xFFFF9A
-#define ADDRFL 0xFFFF9B
-#define ADDRG 0xFFFF9C
-#define ADDRGH 0xFFFF9C
-#define ADDRGL 0xFFFF9D
-#define ADDRH 0xFFFF9E
-#define ADDRHH 0xFFFF9E
-#define ADDRHL 0xFFFF9F
-
-#define ADCSR 0xFFFFA0
-#define ADCR 0xFFFFA1
-
-#define ABWCR 0xFFFEC0
-#define ASTCR 0xFFFEC1
-#define WTCRAH 0xFFFEC2
-#define WTCRAL 0xFFFEC3
-#define WTCRBH 0xFFFEC4
-#define WTCRBL 0xFFFEC5
-#define RDNCR 0xFFFEC6
-#define CSACRH 0xFFFEC8
-#define CSACRL 0xFFFEC9
-#define BROMCRH 0xFFFECA
-#define BROMCRL 0xFFFECB
-#define BCR 0xFFFECC
-#define DRAMCR 0xFFFED0
-#define DRACCR 0xFFFED2
-#define REFCR 0xFFFED4
-#define RTCNT 0xFFFED6
-#define RTCOR 0xFFFED7
-
-#define MAR0AH 0xFFFEE0
-#define MAR0AL 0xFFFEE2
-#define IOAR0A 0xFFFEE4
-#define ETCR0A 0xFFFEE6
-#define MAR0BH 0xFFFEE8
-#define MAR0BL 0xFFFEEA
-#define IOAR0B 0xFFFEEC
-#define ETCR0B 0xFFFEEE
-#define MAR1AH 0xFFFEF0
-#define MAR1AL 0xFFFEF2
-#define IOAR1A 0xFFFEF4
-#define ETCR1A 0xFFFEF6
-#define MAR1BH 0xFFFEF8
-#define MAR1BL 0xFFFEFA
-#define IOAR1B 0xFFFEFC
-#define ETCR1B 0xFFFEFE
-#define DMAWER 0xFFFF20
-#define DMATCR 0xFFFF21
-#define DMACR0A 0xFFFF22
-#define DMACR0B 0xFFFF23
-#define DMACR1A 0xFFFF24
-#define DMACR1B 0xFFFF25
-#define DMABCRH 0xFFFF26
-#define DMABCRL 0xFFFF27
-
-#define EDSAR0 0xFFFDC0
-#define EDDAR0 0xFFFDC4
-#define EDTCR0 0xFFFDC8
-#define EDMDR0 0xFFFDCC
-#define EDMDR0H 0xFFFDCC
-#define EDMDR0L 0xFFFDCD
-#define EDACR0 0xFFFDCE
-#define EDSAR1 0xFFFDD0
-#define EDDAR1 0xFFFDD4
-#define EDTCR1 0xFFFDD8
-#define EDMDR1 0xFFFDDC
-#define EDMDR1H 0xFFFDDC
-#define EDMDR1L 0xFFFDDD
-#define EDACR1 0xFFFDDE
-#define EDSAR2 0xFFFDE0
-#define EDDAR2 0xFFFDE4
-#define EDTCR2 0xFFFDE8
-#define EDMDR2 0xFFFDEC
-#define EDMDR2H 0xFFFDEC
-#define EDMDR2L 0xFFFDED
-#define EDACR2 0xFFFDEE
-#define EDSAR3 0xFFFDF0
-#define EDDAR3 0xFFFDF4
-#define EDTCR3 0xFFFDF8
-#define EDMDR3 0xFFFDFC
-#define EDMDR3H 0xFFFDFC
-#define EDMDR3L 0xFFFDFD
-#define EDACR3 0xFFFDFE
-
-#define IPRA 0xFFFE00
-#define IPRB 0xFFFE02
-#define IPRC 0xFFFE04
-#define IPRD 0xFFFE06
-#define IPRE 0xFFFE08
-#define IPRF 0xFFFE0A
-#define IPRG 0xFFFE0C
-#define IPRH 0xFFFE0E
-#define IPRI 0xFFFE10
-#define IPRJ 0xFFFE12
-#define IPRK 0xFFFE14
-#define ITSR 0xFFFE16
-#define SSIER 0xFFFE18
-#define ISCRH 0xFFFE1A
-#define ISCRL 0xFFFE1C
-
-#define INTCR 0xFFFF31
-#define IER 0xFFFF32
-#define IERH 0xFFFF32
-#define IERL 0xFFFF33
-#define ISR 0xFFFF34
-#define ISRH 0xFFFF34
-#define ISRL 0xFFFF35
-
-#define P1DDR 0xFFFE20
-#define P2DDR 0xFFFE21
-#define P3DDR 0xFFFE22
-#define P4DDR 0xFFFE23
-#define P5DDR 0xFFFE24
-#define P6DDR 0xFFFE25
-#define P7DDR 0xFFFE26
-#define P8DDR 0xFFFE27
-#define P9DDR 0xFFFE28
-#define PADDR 0xFFFE29
-#define PBDDR 0xFFFE2A
-#define PCDDR 0xFFFE2B
-#define PDDDR 0xFFFE2C
-#define PEDDR 0xFFFE2D
-#define PFDDR 0xFFFE2E
-#define PGDDR 0xFFFE2F
-#define PHDDR 0xFFFF74
-
-#define PFCR0 0xFFFE32
-#define PFCR1 0xFFFE33
-#define PFCR2 0xFFFE34
-
-#define PAPCR 0xFFFE36
-#define PBPCR 0xFFFE37
-#define PCPCR 0xFFFE38
-#define PDPCR 0xFFFE39
-#define PEPCR 0xFFFE3A
-
-#define P3ODR 0xFFFE3C
-#define PAODR 0xFFFE3D
-
-#define P1DR 0xFFFF60
-#define P2DR 0xFFFF61
-#define P3DR 0xFFFF62
-#define P4DR 0xFFFF63
-#define P5DR 0xFFFF64
-#define P6DR 0xFFFF65
-#define P7DR 0xFFFF66
-#define P8DR 0xFFFF67
-#define P9DR 0xFFFF68
-#define PADR 0xFFFF69
-#define PBDR 0xFFFF6A
-#define PCDR 0xFFFF6B
-#define PDDR 0xFFFF6C
-#define PEDR 0xFFFF6D
-#define PFDR 0xFFFF6E
-#define PGDR 0xFFFF6F
-#define PHDR 0xFFFF72
-
-#define PORT1 0xFFFF50
-#define PORT2 0xFFFF51
-#define PORT3 0xFFFF52
-#define PORT4 0xFFFF53
-#define PORT5 0xFFFF54
-#define PORT6 0xFFFF55
-#define PORT7 0xFFFF56
-#define PORT8 0xFFFF57
-#define PORT9 0xFFFF58
-#define PORTA 0xFFFF59
-#define PORTB 0xFFFF5A
-#define PORTC 0xFFFF5B
-#define PORTD 0xFFFF5C
-#define PORTE 0xFFFF5D
-#define PORTF 0xFFFF5E
-#define PORTG 0xFFFF5F
-#define PORTH 0xFFFF70
-
-#define PCR 0xFFFF46
-#define PMR 0xFFFF47
-#define NDERH 0xFFFF48
-#define NDERL 0xFFFF49
-#define PODRH 0xFFFF4A
-#define PODRL 0xFFFF4B
-#define NDRH1 0xFFFF4C
-#define NDRL1 0xFFFF4D
-#define NDRH2 0xFFFF4E
-#define NDRL2 0xFFFF4F
-
-#define SMR0 0xFFFF78
-#define BRR0 0xFFFF79
-#define SCR0 0xFFFF7A
-#define TDR0 0xFFFF7B
-#define SSR0 0xFFFF7C
-#define RDR0 0xFFFF7D
-#define SCMR0 0xFFFF7E
-#define SMR1 0xFFFF80
-#define BRR1 0xFFFF81
-#define SCR1 0xFFFF82
-#define TDR1 0xFFFF83
-#define SSR1 0xFFFF84
-#define RDR1 0xFFFF85
-#define SCMR1 0xFFFF86
-#define SMR2 0xFFFF88
-#define BRR2 0xFFFF89
-#define SCR2 0xFFFF8A
-#define TDR2 0xFFFF8B
-#define SSR2 0xFFFF8C
-#define RDR2 0xFFFF8D
-#define SCMR2 0xFFFF8E
-
-#define IRCR0 0xFFFE1E
-#define SEMR 0xFFFDA8
-
-#define MDCR 0xFFFF3E
-#define SYSCR 0xFFFF3D
-#define MSTPCRH 0xFFFF40
-#define MSTPCRL 0xFFFF41
-#define FLMCR1 0xFFFFC8
-#define FLMCR2 0xFFFFC9
-#define EBR1 0xFFFFCA
-#define EBR2 0xFFFFCB
-#define CTGARC_RAMCR 0xFFFECE
-#define SBYCR 0xFFFF3A
-#define SCKCR 0xFFFF3B
-#define PLLCR 0xFFFF45
-
-#define TSTR 0xFFFFC0
-#define TSNC 0XFFFFC1
-
-#define TCR0 0xFFFFD0
-#define TMDR0 0xFFFFD1
-#define TIORH0 0xFFFFD2
-#define TIORL0 0xFFFFD3
-#define TIER0 0xFFFFD4
-#define TSR0 0xFFFFD5
-#define TCNT0 0xFFFFD6
-#define GRA0 0xFFFFD8
-#define GRB0 0xFFFFDA
-#define GRC0 0xFFFFDC
-#define GRD0 0xFFFFDE
-#define TCR1 0xFFFFE0
-#define TMDR1 0xFFFFE1
-#define TIORH1 0xFFFFE2
-#define TIORL1 0xFFFFE3
-#define TIER1 0xFFFFE4
-#define TSR1 0xFFFFE5
-#define TCNT1 0xFFFFE6
-#define GRA1 0xFFFFE8
-#define GRB1 0xFFFFEA
-#define TCR2 0xFFFFF0
-#define TMDR2 0xFFFFF1
-#define TIORH2 0xFFFFF2
-#define TIORL2 0xFFFFF3
-#define TIER2 0xFFFFF4
-#define TSR2 0xFFFFF5
-#define TCNT2 0xFFFFF6
-#define GRA2 0xFFFFF8
-#define GRB2 0xFFFFFA
-#define TCR3 0xFFFE80
-#define TMDR3 0xFFFE81
-#define TIORH3 0xFFFE82
-#define TIORL3 0xFFFE83
-#define TIER3 0xFFFE84
-#define TSR3 0xFFFE85
-#define TCNT3 0xFFFE86
-#define GRA3 0xFFFE88
-#define GRB3 0xFFFE8A
-#define GRC3 0xFFFE8C
-#define GRD3 0xFFFE8E
-#define TCR4 0xFFFE90
-#define TMDR4 0xFFFE91
-#define TIORH4 0xFFFE92
-#define TIORL4 0xFFFE93
-#define TIER4 0xFFFE94
-#define TSR4 0xFFFE95
-#define TCNT4 0xFFFE96
-#define GRA4 0xFFFE98
-#define GRB4 0xFFFE9A
-#define TCR5 0xFFFEA0
-#define TMDR5 0xFFFEA1
-#define TIORH5 0xFFFEA2
-#define TIORL5 0xFFFEA3
-#define TIER5 0xFFFEA4
-#define TSR5 0xFFFEA5
-#define TCNT5 0xFFFEA6
-#define GRA5 0xFFFEA8
-#define GRB5 0xFFFEAA
-
-#define _8TCR0 0xFFFFB0
-#define _8TCR1 0xFFFFB1
-#define _8TCSR0 0xFFFFB2
-#define _8TCSR1 0xFFFFB3
-#define _8TCORA0 0xFFFFB4
-#define _8TCORA1 0xFFFFB5
-#define _8TCORB0 0xFFFFB6
-#define _8TCORB1 0xFFFFB7
-#define _8TCNT0 0xFFFFB8
-#define _8TCNT1 0xFFFFB9
-
-#define TCSR 0xFFFFBC
-#define TCNT 0xFFFFBD
-#define RSTCSRW 0xFFFFBE
-#define RSTCSRR 0xFFFFBF
-
-#endif /* __KERNEL__ */
-#endif /* __REGS_H8S267x__ */
diff --git a/arch/h8300/include/asm/regs306x.h b/arch/h8300/include/asm/regs306x.h
deleted file mode 100644
index 027dd63..0000000
--- a/arch/h8300/include/asm/regs306x.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* internal Peripherals Register address define */
-/* CPU: H8/306x */
-
-#if !defined(__REGS_H8306x__)
-#define __REGS_H8306x__
-
-#if defined(__KERNEL__)
-
-#define DASTCR 0xFEE01A
-#define DADR0 0xFEE09C
-#define DADR1 0xFEE09D
-#define DACR 0xFEE09E
-
-#define ADDRAH 0xFFFFE0
-#define ADDRAL 0xFFFFE1
-#define ADDRBH 0xFFFFE2
-#define ADDRBL 0xFFFFE3
-#define ADDRCH 0xFFFFE4
-#define ADDRCL 0xFFFFE5
-#define ADDRDH 0xFFFFE6
-#define ADDRDL 0xFFFFE7
-#define ADCSR 0xFFFFE8
-#define ADCR 0xFFFFE9
-
-#define BRCR 0xFEE013
-#define ADRCR 0xFEE01E
-#define CSCR 0xFEE01F
-#define ABWCR 0xFEE020
-#define ASTCR 0xFEE021
-#define WCRH 0xFEE022
-#define WCRL 0xFEE023
-#define BCR 0xFEE024
-#define DRCRA 0xFEE026
-#define DRCRB 0xFEE027
-#define RTMCSR 0xFEE028
-#define RTCNT 0xFEE029
-#define RTCOR 0xFEE02A
-
-#define MAR0AR 0xFFFF20
-#define MAR0AE 0xFFFF21
-#define MAR0AH 0xFFFF22
-#define MAR0AL 0xFFFF23
-#define ETCR0AL 0xFFFF24
-#define ETCR0AH 0xFFFF25
-#define IOAR0A 0xFFFF26
-#define DTCR0A 0xFFFF27
-#define MAR0BR 0xFFFF28
-#define MAR0BE 0xFFFF29
-#define MAR0BH 0xFFFF2A
-#define MAR0BL 0xFFFF2B
-#define ETCR0BL 0xFFFF2C
-#define ETCR0BH 0xFFFF2D
-#define IOAR0B 0xFFFF2E
-#define DTCR0B 0xFFFF2F
-#define MAR1AR 0xFFFF30
-#define MAR1AE 0xFFFF31
-#define MAR1AH 0xFFFF32
-#define MAR1AL 0xFFFF33
-#define ETCR1AL 0xFFFF34
-#define ETCR1AH 0xFFFF35
-#define IOAR1A 0xFFFF36
-#define DTCR1A 0xFFFF37
-#define MAR1BR 0xFFFF38
-#define MAR1BE 0xFFFF39
-#define MAR1BH 0xFFFF3A
-#define MAR1BL 0xFFFF3B
-#define ETCR1BL 0xFFFF3C
-#define ETCR1BH 0xFFFF3D
-#define IOAR1B 0xFFFF3E
-#define DTCR1B 0xFFFF3F
-
-#define ISCR 0xFEE014
-#define IER 0xFEE015
-#define ISR 0xFEE016
-#define IPRA 0xFEE018
-#define IPRB 0xFEE019
-
-#define P1DDR 0xFEE000
-#define P2DDR 0xFEE001
-#define P3DDR 0xFEE002
-#define P4DDR 0xFEE003
-#define P5DDR 0xFEE004
-#define P6DDR 0xFEE005
-/*#define P7DDR 0xFEE006*/
-#define P8DDR 0xFEE007
-#define P9DDR 0xFEE008
-#define PADDR 0xFEE009
-#define PBDDR 0xFEE00A
-
-#define P1DR 0xFFFFD0
-#define P2DR 0xFFFFD1
-#define P3DR 0xFFFFD2
-#define P4DR 0xFFFFD3
-#define P5DR 0xFFFFD4
-#define P6DR 0xFFFFD5
-/*#define P7DR 0xFFFFD6*/
-#define P8DR 0xFFFFD7
-#define P9DR 0xFFFFD8
-#define PADR 0xFFFFD9
-#define PBDR 0xFFFFDA
-
-#define P2CR 0xFEE03C
-#define P4CR 0xFEE03E
-#define P5CR 0xFEE03F
-
-#define SMR0 0xFFFFB0
-#define BRR0 0xFFFFB1
-#define SCR0 0xFFFFB2
-#define TDR0 0xFFFFB3
-#define SSR0 0xFFFFB4
-#define RDR0 0xFFFFB5
-#define SCMR0 0xFFFFB6
-#define SMR1 0xFFFFB8
-#define BRR1 0xFFFFB9
-#define SCR1 0xFFFFBA
-#define TDR1 0xFFFFBB
-#define SSR1 0xFFFFBC
-#define RDR1 0xFFFFBD
-#define SCMR1 0xFFFFBE
-#define SMR2 0xFFFFC0
-#define BRR2 0xFFFFC1
-#define SCR2 0xFFFFC2
-#define TDR2 0xFFFFC3
-#define SSR2 0xFFFFC4
-#define RDR2 0xFFFFC5
-#define SCMR2 0xFFFFC6
-
-#define MDCR 0xFEE011
-#define SYSCR 0xFEE012
-#define DIVCR 0xFEE01B
-#define MSTCRH 0xFEE01C
-#define MSTCRL 0xFEE01D
-#define FLMCR1 0xFEE030
-#define FLMCR2 0xFEE031
-#define EBR1 0xFEE032
-#define EBR2 0xFEE033
-#define RAMCR 0xFEE077
-
-#define TSTR 0xFFFF60
-#define TSNC 0XFFFF61
-#define TMDR 0xFFFF62
-#define TOLR 0xFFFF63
-#define TISRA 0xFFFF64
-#define TISRB 0xFFFF65
-#define TISRC 0xFFFF66
-#define TCR0 0xFFFF68
-#define TIOR0 0xFFFF69
-#define TCNT0H 0xFFFF6A
-#define TCNT0L 0xFFFF6B
-#define GRA0H 0xFFFF6C
-#define GRA0L 0xFFFF6D
-#define GRB0H 0xFFFF6E
-#define GRB0L 0xFFFF6F
-#define TCR1 0xFFFF70
-#define TIOR1 0xFFFF71
-#define TCNT1H 0xFFFF72
-#define TCNT1L 0xFFFF73
-#define GRA1H 0xFFFF74
-#define GRA1L 0xFFFF75
-#define GRB1H 0xFFFF76
-#define GRB1L 0xFFFF77
-#define TCR3 0xFFFF78
-#define TIOR3 0xFFFF79
-#define TCNT3H 0xFFFF7A
-#define TCNT3L 0xFFFF7B
-#define GRA3H 0xFFFF7C
-#define GRA3L 0xFFFF7D
-#define GRB3H 0xFFFF7E
-#define GRB3L 0xFFFF7F
-
-#define _8TCR0 0xFFFF80
-#define _8TCR1 0xFFFF81
-#define _8TCSR0 0xFFFF82
-#define _8TCSR1 0xFFFF83
-#define TCORA0 0xFFFF84
-#define TCORA1 0xFFFF85
-#define TCORB0 0xFFFF86
-#define TCORB1 0xFFFF87
-#define _8TCNT0 0xFFFF88
-#define _8TCNT1 0xFFFF89
-
-#define _8TCR2 0xFFFF90
-#define _8TCR3 0xFFFF91
-#define _8TCSR2 0xFFFF92
-#define _8TCSR3 0xFFFF93
-#define TCORA2 0xFFFF94
-#define TCORA3 0xFFFF95
-#define TCORB2 0xFFFF96
-#define TCORB3 0xFFFF97
-#define _8TCNT2 0xFFFF98
-#define _8TCNT3 0xFFFF99
-
-#define TCSR 0xFFFF8C
-#define TCNT 0xFFFF8D
-#define RSTCSR 0xFFFF8F
-
-#define TPMR 0xFFFFA0
-#define TPCR 0xFFFFA1
-#define NDERB 0xFFFFA2
-#define NDERA 0xFFFFA3
-#define NDRB1 0xFFFFA4
-#define NDRA1 0xFFFFA5
-#define NDRB2 0xFFFFA6
-#define NDRA2 0xFFFFA7
-
-#define TCSR 0xFFFF8C
-#define TCNT 0xFFFF8D
-#define RSTCSRW 0xFFFF8E
-#define RSTCSRR 0xFFFF8F
-
-#endif /* __KERNEL__ */
-#endif /* __REGS_H8306x__ */
diff --git a/arch/h8300/include/asm/scatterlist.h b/arch/h8300/include/asm/scatterlist.h
deleted file mode 100644
index 82130ed..0000000
--- a/arch/h8300/include/asm/scatterlist.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_SCATTERLIST_H
-#define _H8300_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* !(_H8300_SCATTERLIST_H) */
diff --git a/arch/h8300/include/asm/sections.h b/arch/h8300/include/asm/sections.h
deleted file mode 100644
index a81743e..0000000
--- a/arch/h8300/include/asm/sections.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_SECTIONS_H_
-#define _H8300_SECTIONS_H_
-
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/arch/h8300/include/asm/segment.h b/arch/h8300/include/asm/segment.h
deleted file mode 100644
index b79a82d..0000000
--- a/arch/h8300/include/asm/segment.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _H8300_SEGMENT_H
-#define _H8300_SEGMENT_H
-
-/* define constants */
-#define USER_DATA (1)
-#ifndef __USER_DS
-#define __USER_DS (USER_DATA)
-#endif
-#define USER_PROGRAM (2)
-#define SUPER_DATA (3)
-#ifndef __KERNEL_DS
-#define __KERNEL_DS (SUPER_DATA)
-#endif
-#define SUPER_PROGRAM (4)
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-#define USER_DS MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS)
-
-/*
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-
-static inline mm_segment_t get_fs(void)
-{
- return USER_DS;
-}
-
-static inline mm_segment_t get_ds(void)
-{
- /* return the supervisor data space code */
- return KERNEL_DS;
-}
-
-static inline void set_fs(mm_segment_t val)
-{
-}
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _H8300_SEGMENT_H */
diff --git a/arch/h8300/include/asm/sh_bios.h b/arch/h8300/include/asm/sh_bios.h
deleted file mode 100644
index b6bb6e5..0000000
--- a/arch/h8300/include/asm/sh_bios.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* eCos HAL interface header */
-
-#ifndef SH_BIOS_H
-#define SH_BIOS_H
-
-#define HAL_IF_VECTOR_TABLE 0xfffe20
-#define CALL_IF_SET_CONSOLE_COMM 13
-#define QUERY_CURRENT -1
-#define MANGLER -3
-
-/* Checking for GDB stub active */
-/* suggestion Jonathan Larmour */
-static int sh_bios_in_gdb_mode(void)
-{
- static int gdb_active = -1;
- if (gdb_active == -1) {
- int (*set_console_comm)(int);
- set_console_comm = ((void **)HAL_IF_VECTOR_TABLE)[CALL_IF_SET_CONSOLE_COMM];
- gdb_active = (set_console_comm(QUERY_CURRENT) == MANGLER);
- }
- return gdb_active;
-}
-
-static void sh_bios_gdb_detach(void)
-{
-
-}
-
-#endif
diff --git a/arch/h8300/include/asm/shm.h b/arch/h8300/include/asm/shm.h
deleted file mode 100644
index ed6623c..0000000
--- a/arch/h8300/include/asm/shm.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _H8300_SHM_H
-#define _H8300_SHM_H
-
-
-/* format of page table entries that correspond to shared memory pages
- currently out in swap space (see also mm/swap.c):
- bits 0-1 (PAGE_PRESENT) is = 0
- bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
- bits 31..9 are used like this:
- bits 15..9 (SHM_ID) the id of the shared memory segment
- bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
- (actually only bits 25..16 get used since SHMMAX is so low)
- bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
-*/
-/* on the m68k both bits 0 and 1 must be zero */
-/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
- others are reduced by 2. --m */
-
-#ifndef CONFIG_SUN3
-#define SHM_ID_SHIFT 9
-#else
-#define SHM_ID_SHIFT 7
-#endif
-#define _SHM_ID_BITS 7
-#define SHM_ID_MASK ((1<<_SHM_ID_BITS)-1)
-
-#define SHM_IDX_SHIFT (SHM_ID_SHIFT+_SHM_ID_BITS)
-#define _SHM_IDX_BITS 15
-#define SHM_IDX_MASK ((1<<_SHM_IDX_BITS)-1)
-
-#endif /* _H8300_SHM_H */
diff --git a/arch/h8300/include/asm/shmparam.h b/arch/h8300/include/asm/shmparam.h
deleted file mode 100644
index d186395..0000000
--- a/arch/h8300/include/asm/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_SHMPARAM_H
-#define _H8300_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _H8300_SHMPARAM_H */
diff --git a/arch/h8300/include/asm/signal.h b/arch/h8300/include/asm/signal.h
deleted file mode 100644
index 6341e36..0000000
--- a/arch/h8300/include/asm/signal.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _H8300_SIGNAL_H
-#define _H8300_SIGNAL_H
-
-#include <uapi/asm/signal.h>
-
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#define __ARCH_HAS_SA_RESTORER
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#endif /* _H8300_SIGNAL_H */
diff --git a/arch/h8300/include/asm/smp.h b/arch/h8300/include/asm/smp.h
deleted file mode 100644
index 9e9bd7e..0000000
--- a/arch/h8300/include/asm/smp.h
+++ /dev/null
@@ -1 +0,0 @@
-/* nothing required here yet */
diff --git a/arch/h8300/include/asm/spinlock.h b/arch/h8300/include/asm/spinlock.h
deleted file mode 100644
index d5407fa..0000000
--- a/arch/h8300/include/asm/spinlock.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __H8300_SPINLOCK_H
-#define __H8300_SPINLOCK_H
-
-#error "H8/300 doesn't do SMP yet"
-
-#endif
diff --git a/arch/h8300/include/asm/string.h b/arch/h8300/include/asm/string.h
deleted file mode 100644
index ca50348..0000000
--- a/arch/h8300/include/asm/string.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _H8300_STRING_H_
-#define _H8300_STRING_H_
-
-#ifdef __KERNEL__ /* only set these up for kernel code */
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#define __HAVE_ARCH_MEMSET
-extern void * memset(void * s, int c, size_t count);
-
-#define __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *d, const void *s, size_t count);
-
-#else /* KERNEL */
-
-/*
- * let user libraries deal with these,
- * IMHO the kernel has no place defining these functions for user apps
- */
-
-#define __HAVE_ARCH_STRCPY 1
-#define __HAVE_ARCH_STRNCPY 1
-#define __HAVE_ARCH_STRCAT 1
-#define __HAVE_ARCH_STRNCAT 1
-#define __HAVE_ARCH_STRCMP 1
-#define __HAVE_ARCH_STRNCMP 1
-#define __HAVE_ARCH_STRNICMP 1
-#define __HAVE_ARCH_STRCHR 1
-#define __HAVE_ARCH_STRRCHR 1
-#define __HAVE_ARCH_STRSTR 1
-#define __HAVE_ARCH_STRLEN 1
-#define __HAVE_ARCH_STRNLEN 1
-#define __HAVE_ARCH_MEMSET 1
-#define __HAVE_ARCH_MEMCPY 1
-#define __HAVE_ARCH_MEMMOVE 1
-#define __HAVE_ARCH_MEMSCAN 1
-#define __HAVE_ARCH_MEMCMP 1
-#define __HAVE_ARCH_MEMCHR 1
-#define __HAVE_ARCH_STRTOK 1
-
-#endif /* KERNEL */
-
-#endif /* _M68K_STRING_H_ */
diff --git a/arch/h8300/include/asm/switch_to.h b/arch/h8300/include/asm/switch_to.h
deleted file mode 100644
index cdd8731..0000000
--- a/arch/h8300/include/asm/switch_to.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef _H8300_SWITCH_TO_H
-#define _H8300_SWITCH_TO_H
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing. This
- * also clears the TS-flag if the task we switched to has used the
- * math co-processor latest.
- */
-/*
- * switch_to() saves the extra registers, that are not saved
- * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
- * a0-a1. Some of these are used by schedule() and its predecessors
- * and so we might get see unexpected behaviors when a task returns
- * with unexpected register values.
- *
- * syscall stores these registers itself and none of them are used
- * by syscall after the function in the syscall has been called.
- *
- * Beware that resume now expects *next to be in d1 and the offset of
- * tss to be in a1. This saves a few instructions as we no longer have
- * to push them onto the stack and read them back right after.
- *
- * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
- *
- * Changed 96/09/19 by Andreas Schwab
- * pass prev in a0, next in a1, offset of tss in d1, and whether
- * the mm structures are shared in d2 (to avoid atc flushing).
- *
- * H8/300 Porting 2002/09/04 Yoshinori Sato
- */
-
-asmlinkage void resume(void);
-#define switch_to(prev,next,last) { \
- void *_last; \
- __asm__ __volatile__( \
- "mov.l %1, er0\n\t" \
- "mov.l %2, er1\n\t" \
- "mov.l %3, er2\n\t" \
- "jsr @_resume\n\t" \
- "mov.l er2,%0\n\t" \
- : "=r" (_last) \
- : "r" (&(prev->thread)), \
- "r" (&(next->thread)), \
- "g" (prev) \
- : "cc", "er0", "er1", "er2", "er3"); \
- (last) = _last; \
-}
-
-#endif /* _H8300_SWITCH_TO_H */
diff --git a/arch/h8300/include/asm/target_time.h b/arch/h8300/include/asm/target_time.h
deleted file mode 100644
index 9f2a9aa..0000000
--- a/arch/h8300/include/asm/target_time.h
+++ /dev/null
@@ -1,4 +0,0 @@
-extern int platform_timer_setup(void (*timer_int)(int, void *, struct pt_regs *));
-extern void platform_timer_eoi(void);
-extern void platform_gettod(unsigned int *year, unsigned int *mon, unsigned int *day,
- unsigned int *hour, unsigned int *min, unsigned int *sec);
diff --git a/arch/h8300/include/asm/termios.h b/arch/h8300/include/asm/termios.h
deleted file mode 100644
index 93a63df..0000000
--- a/arch/h8300/include/asm/termios.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef _H8300_TERMIOS_H
-#define _H8300_TERMIOS_H
-
-#include <uapi/asm/termios.h>
-
-/* intr=^C quit=^| erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
- unsigned short tmp; \
- get_user(tmp, &(termio)->c_iflag); \
- (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
- get_user(tmp, &(termio)->c_oflag); \
- (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
- get_user(tmp, &(termio)->c_cflag); \
- (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
- get_user(tmp, &(termio)->c_lflag); \
- (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
- get_user((termios)->c_line, &(termio)->c_line); \
- copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
- put_user((termios)->c_iflag, &(termio)->c_iflag); \
- put_user((termios)->c_oflag, &(termio)->c_oflag); \
- put_user((termios)->c_cflag, &(termio)->c_cflag); \
- put_user((termios)->c_lflag, &(termio)->c_lflag); \
- put_user((termios)->c_line, &(termio)->c_line); \
- copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* _H8300_TERMIOS_H */
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
deleted file mode 100644
index ec2f777..0000000
--- a/arch/h8300/include/asm/thread_info.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/* thread_info.h: h8300 low-level thread information
- * adapted from the i386 and PPC versions by Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#include <asm/page.h>
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * low level task data.
- * If you change this, change the TI_* offsets below to match.
- */
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- int cpu; /* cpu we're on */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
- struct restart_block restart_block;
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .preempt_count = INIT_PREEMPT_COUNT, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#define THREAD_SIZE_ORDER 1
-#define THREAD_SIZE 8192 /* 2 pages */
-
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
- __asm__(
- "mov.l sp, %0 \n\t"
- "and.l %1, %0"
- : "=&r"(ti)
- : "i" (~(THREAD_SIZE-1))
- );
- return ti;
-}
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * Offsets in thread_info structure, used in assembly code
- */
-#define TI_TASK 0
-#define TI_EXECDOMAIN 4
-#define TI_FLAGS 8
-#define TI_CPU 12
-#define TI_PRE_COUNT 16
-
-#define PREEMPT_ACTIVE 0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_MEMDIE 4 /* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
-#define TIF_NOTIFY_RESUME 6 /* callback before returning to user */
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
-
-#define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
- _TIF_NOTIFY_RESUME)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/h8300/include/asm/timer.h b/arch/h8300/include/asm/timer.h
deleted file mode 100644
index def8046..0000000
--- a/arch/h8300/include/asm/timer.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __H8300_TIMER_H
-#define __H8300_TIMER_H
-
-void h8300_timer_tick(void);
-void h8300_timer_setup(void);
-void h8300_gettod(unsigned int *year, unsigned int *mon, unsigned int *day,
- unsigned int *hour, unsigned int *min, unsigned int *sec);
-
-#define TIMER_FREQ (CONFIG_CPU_CLOCK*10000) /* Timer input freq. */
-
-#define calc_param(cnt, div, rate, limit) \
-do { \
- cnt = TIMER_FREQ / HZ; \
- for (div = 0; div < ARRAY_SIZE(divide_rate); div++) { \
- if (rate[div] == 0) \
- continue; \
- if ((cnt / rate[div]) > limit) \
- break; \
- } \
- if (div == ARRAY_SIZE(divide_rate)) \
- panic("Timer counter overflow"); \
- cnt /= divide_rate[div]; \
-} while(0)
-
-#endif
diff --git a/arch/h8300/include/asm/timex.h b/arch/h8300/include/asm/timex.h
deleted file mode 100644
index 23e6701..0000000
--- a/arch/h8300/include/asm/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-h8300/timex.h
- *
- * H8/300 architecture timex specifications
- */
-#ifndef _ASM_H8300_TIMEX_H
-#define _ASM_H8300_TIMEX_H
-
-#define CLOCK_TICK_RATE (CONFIG_CPU_CLOCK*1000/8192) /* Timer input freq. */
-
-typedef unsigned long cycles_t;
-extern short h8300_timer_count;
-
-static inline cycles_t get_cycles(void)
-{
- return 0;
-}
-
-#endif
diff --git a/arch/h8300/include/asm/tlb.h b/arch/h8300/include/asm/tlb.h
deleted file mode 100644
index 7f07430..0000000
--- a/arch/h8300/include/asm/tlb.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __H8300_TLB_H__
-#define __H8300_TLB_H__
-
-#define tlb_flush(tlb) do { } while(0)
-
-#include <asm-generic/tlb.h>
-
-#endif
diff --git a/arch/h8300/include/asm/tlbflush.h b/arch/h8300/include/asm/tlbflush.h
deleted file mode 100644
index 41c148a..0000000
--- a/arch/h8300/include/asm/tlbflush.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _H8300_TLBFLUSH_H
-#define _H8300_TLBFLUSH_H
-
-/*
- * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
- * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
- */
-
-#include <asm/setup.h>
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
- BUG();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
- BUG();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
- BUG();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
- BUG();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
- BUG();
-}
-
-static inline void flush_tlb_range(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- BUG();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
- BUG();
-}
-
-#endif /* _H8300_TLBFLUSH_H */
diff --git a/arch/h8300/include/asm/topology.h b/arch/h8300/include/asm/topology.h
deleted file mode 100644
index fdc1219..0000000
--- a/arch/h8300/include/asm/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_H8300_TOPOLOGY_H
-#define _ASM_H8300_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_H8300_TOPOLOGY_H */
diff --git a/arch/h8300/include/asm/traps.h b/arch/h8300/include/asm/traps.h
deleted file mode 100644
index 41cf6be..0000000
--- a/arch/h8300/include/asm/traps.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/include/asm-h8300/traps.h
- *
- * Copyright (C) 2003 Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#ifndef _H8300_TRAPS_H
-#define _H8300_TRAPS_H
-
-extern void system_call(void);
-extern void interrupt_entry(void);
-extern void trace_break(void);
-
-#define JMP_OP 0x5a000000
-#define JSR_OP 0x5e000000
-#define VECTOR(address) ((JMP_OP)|((unsigned long)address))
-#define REDIRECT(address) ((JSR_OP)|((unsigned long)address))
-
-#define TRACE_VEC 5
-
-#define TRAP0_VEC 8
-#define TRAP1_VEC 9
-#define TRAP2_VEC 10
-#define TRAP3_VEC 11
-
-#if defined(__H8300H__)
-#define NR_TRAPS 12
-#endif
-#if defined(__H8300S__)
-#define NR_TRAPS 16
-#endif
-
-#endif /* _H8300_TRAPS_H */
diff --git a/arch/h8300/include/asm/types.h b/arch/h8300/include/asm/types.h
deleted file mode 100644
index c012707..0000000
--- a/arch/h8300/include/asm/types.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _H8300_TYPES_H
-#define _H8300_TYPES_H
-
-#include <uapi/asm/types.h>
-
-
-#define BITS_PER_LONG 32
-
-#endif /* _H8300_TYPES_H */
diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h
deleted file mode 100644
index 8725d1a..0000000
--- a/arch/h8300/include/asm/uaccess.h
+++ /dev/null
@@ -1,163 +0,0 @@
-#ifndef __H8300_UACCESS_H
-#define __H8300_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/* We let the MMU do all checking */
-#define access_ok(type, addr, size) __access_ok((unsigned long)addr,size)
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-#define RANGE_CHECK_OK(addr, size, lower, upper) \
- (((addr) >= (lower)) && (((addr) + (size)) < (upper)))
-
- extern unsigned long _ramend;
- return(RANGE_CHECK_OK(addr, size, 0L, (unsigned long)&_ramend));
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- */
-
-#define put_user(x, ptr) \
-({ \
- int __pu_err = 0; \
- typeof(*(ptr)) __pu_val = (x); \
- switch (sizeof (*(ptr))) { \
- case 1: \
- case 2: \
- case 4: \
- *(ptr) = (__pu_val); \
- break; \
- case 8: \
- memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
- break; \
- default: \
- __pu_err = __put_user_bad(); \
- break; \
- } \
- __pu_err; \
-})
-#define __put_user(x, ptr) put_user(x, ptr)
-
-extern int __put_user_bad(void);
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#define __ptr(x) ((unsigned long *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#define get_user(x, ptr) \
-({ \
- int __gu_err = 0; \
- typeof(*(ptr)) __gu_val = *ptr; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- case 2: \
- case 4: \
- case 8: \
- break; \
- default: \
- __gu_err = __get_user_bad(); \
- break; \
- } \
- (x) = __gu_val; \
- __gu_err; \
-})
-#define __get_user(x, ptr) get_user(x, ptr)
-
-extern int __get_user_bad(void);
-
-#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
-#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
-
-#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
-#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-static inline long
-strncpy_from_user(char *dst, const char *src, long count)
-{
- char *tmp;
- strncpy(dst, src, count);
- for (tmp = dst; *tmp && count > 0; tmp++, count--)
- ;
- return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-static inline long strnlen_user(const char *src, long n)
-{
- return(strlen(src) + 1); /* DAVIDM make safer */
-}
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long
-clear_user(void *to, unsigned long n)
-{
- memset(to, 0, n);
- return 0;
-}
-
-#define __clear_user clear_user
-
-#endif /* _H8300_UACCESS_H */
diff --git a/arch/h8300/include/asm/ucontext.h b/arch/h8300/include/asm/ucontext.h
deleted file mode 100644
index 0bcf8f8..0000000
--- a/arch/h8300/include/asm/ucontext.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _H8300_UCONTEXT_H
-#define _H8300_UCONTEXT_H
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif
diff --git a/arch/h8300/include/asm/unaligned.h b/arch/h8300/include/asm/unaligned.h
deleted file mode 100644
index b8d06c7..0000000
--- a/arch/h8300/include/asm/unaligned.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ASM_H8300_UNALIGNED_H
-#define _ASM_H8300_UNALIGNED_H
-
-#include <linux/unaligned/be_memmove.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_be
-#define put_unaligned __put_unaligned_be
-
-#endif /* _ASM_H8300_UNALIGNED_H */
diff --git a/arch/h8300/include/asm/unistd.h b/arch/h8300/include/asm/unistd.h
deleted file mode 100644
index ab671ec..0000000
--- a/arch/h8300/include/asm/unistd.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _ASM_H8300_UNISTD_H_
-#define _ASM_H8300_UNISTD_H_
-
-#include <uapi/asm/unistd.h>
-
-
-#define NR_syscalls 321
-
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_IPC
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLD_MMAP
-#define __ARCH_WANT_SYS_OLD_SELECT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_FORK
-#define __ARCH_WANT_SYS_VFORK
-#define __ARCH_WANT_SYS_CLONE
-
-#endif /* _ASM_H8300_UNISTD_H_ */
diff --git a/arch/h8300/include/asm/user.h b/arch/h8300/include/asm/user.h
deleted file mode 100644
index 14a9e18..0000000
--- a/arch/h8300/include/asm/user.h
+++ /dev/null
@@ -1,75 +0,0 @@
-#ifndef _H8300_USER_H
-#define _H8300_USER_H
-
-#include <asm/page.h>
-
-/* Core file format: The core file is written in such a way that gdb
- can understand it and provide useful information to the user (under
- linux we use the 'trad-core' bfd). There are quite a number of
- obstacles to being able to view the contents of the floating point
- registers, and until these are solved you will not be able to view the
- contents of them. Actually, you can read in the core file and look at
- the contents of the user struct to find out what the floating point
- registers contain.
- The actual file contents are as follows:
- UPAGE: 1 page consisting of a user struct that tells gdb what is present
- in the file. Directly after this is a copy of the task_struct, which
- is currently not used by gdb, but it may come in useful at some point.
- All of the registers are stored as part of the upage. The upage should
- always be only one page.
- DATA: The data area is stored. We use current->end_text to
- current->brk to pick up all of the user variables, plus any memory
- that may have been malloced. No attempt is made to determine if a page
- is demand-zero or if a page is totally unused, we just cover the entire
- range. All of the addresses are rounded in such a way that an integral
- number of pages is written.
- STACK: We need the stack information in order to get a meaningful
- backtrace. We need to write the data from (esp) to
- current->start_stack, so we round each of these off in order to be able
- to write an integer number of pages.
- The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
- is still the layout used by user (the new pt_regs doesn't have
- all registers). */
-struct user_regs_struct {
- long er1,er2,er3,er4,er5,er6;
- long er0;
- long usp;
- long orig_er0;
- short ccr;
- long pc;
-};
-
-
-/* When the kernel dumps core, it starts by dumping the user struct -
- this will be used by gdb to figure out where the data and stack segments
- are within the file, and what virtual addresses to use. */
-struct user{
-/* We start with the registers, to mimic the way that "memory" is returned
- from the ptrace(3,...) function. */
- struct user_regs_struct regs; /* Where the registers are actually stored */
-/* ptrace does not yet supply these. Someday.... */
-/* The rest of this junk is to help gdb figure out what goes where */
- unsigned long int u_tsize; /* Text segment size (pages). */
- unsigned long int u_dsize; /* Data segment size (pages). */
- unsigned long int u_ssize; /* Stack segment size (pages). */
- unsigned long start_code; /* Starting virtual address of text. */
- unsigned long start_stack; /* Starting virtual address of stack area.
- This is actually the bottom of the stack,
- the top of the stack is always found in the
- esp register. */
- long int signal; /* Signal that caused the core dump. */
- int reserved; /* No longer used */
- unsigned long u_ar0; /* Used by gdb to help find the values for */
- /* the registers. */
- unsigned long magic; /* To uniquely identify a core file */
- char u_comm[32]; /* User command that was responsible */
-};
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif
diff --git a/arch/h8300/include/asm/virtconvert.h b/arch/h8300/include/asm/virtconvert.h
deleted file mode 100644
index 19cfd62..0000000
--- a/arch/h8300/include/asm/virtconvert.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef __H8300_VIRT_CONVERT__
-#define __H8300_VIRT_CONVERT__
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-
-#ifdef __KERNEL__
-
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#define phys_to_virt(vaddr) ((void *) (vaddr))
-#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-#endif
-#endif
diff --git a/arch/h8300/include/uapi/asm/Kbuild b/arch/h8300/include/uapi/asm/Kbuild
deleted file mode 100644
index 040178c..0000000
--- a/arch/h8300/include/uapi/asm/Kbuild
+++ /dev/null
@@ -1,34 +0,0 @@
-# UAPI Header export list
-include include/uapi/asm-generic/Kbuild.asm
-
-header-y += auxvec.h
-header-y += bitsperlong.h
-header-y += byteorder.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += kvm_para.h
-header-y += mman.h
-header-y += msgbuf.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ptrace.h
-header-y += resource.h
-header-y += sembuf.h
-header-y += setup.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += stat.h
-header-y += statfs.h
-header-y += swab.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += unistd.h
diff --git a/arch/h8300/include/uapi/asm/auxvec.h b/arch/h8300/include/uapi/asm/auxvec.h
deleted file mode 100644
index 1d36fe38..0000000
--- a/arch/h8300/include/uapi/asm/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMH8300_AUXVEC_H
-#define __ASMH8300_AUXVEC_H
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/bitsperlong.h b/arch/h8300/include/uapi/asm/bitsperlong.h
deleted file mode 100644
index 6dc0bb0..0000000
--- a/arch/h8300/include/uapi/asm/bitsperlong.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/bitsperlong.h>
diff --git a/arch/h8300/include/uapi/asm/byteorder.h b/arch/h8300/include/uapi/asm/byteorder.h
deleted file mode 100644
index 13539da..0000000
--- a/arch/h8300/include/uapi/asm/byteorder.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_BYTEORDER_H
-#define _H8300_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _H8300_BYTEORDER_H */
diff --git a/arch/h8300/include/uapi/asm/errno.h b/arch/h8300/include/uapi/asm/errno.h
deleted file mode 100644
index 0c2f564..0000000
--- a/arch/h8300/include/uapi/asm/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_ERRNO_H
-#define _H8300_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* _H8300_ERRNO_H */
diff --git a/arch/h8300/include/uapi/asm/fcntl.h b/arch/h8300/include/uapi/asm/fcntl.h
deleted file mode 100644
index 1952cb2e..0000000
--- a/arch/h8300/include/uapi/asm/fcntl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _H8300_FCNTL_H
-#define _H8300_FCNTL_H
-
-#define O_DIRECTORY 040000 /* must be a directory */
-#define O_NOFOLLOW 0100000 /* don't follow links */
-#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
-#define O_LARGEFILE 0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif /* _H8300_FCNTL_H */
diff --git a/arch/h8300/include/uapi/asm/ioctl.h b/arch/h8300/include/uapi/asm/ioctl.h
deleted file mode 100644
index b279fe0..0000000
--- a/arch/h8300/include/uapi/asm/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/arch/h8300/include/uapi/asm/ioctls.h b/arch/h8300/include/uapi/asm/ioctls.h
deleted file mode 100644
index 30eaed2..0000000
--- a/arch/h8300/include/uapi/asm/ioctls.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ARCH_H8300_IOCTLS_H__
-#define __ARCH_H8300_IOCTLS_H__
-
-#define FIOQSIZE 0x545E
-
-#include <asm-generic/ioctls.h>
-
-#endif /* __ARCH_H8300_IOCTLS_H__ */
diff --git a/arch/h8300/include/uapi/asm/ipcbuf.h b/arch/h8300/include/uapi/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51..0000000
--- a/arch/h8300/include/uapi/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/arch/h8300/include/uapi/asm/kvm_para.h b/arch/h8300/include/uapi/asm/kvm_para.h
deleted file mode 100644
index 14fab8f..0000000
--- a/arch/h8300/include/uapi/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/arch/h8300/include/uapi/asm/mman.h b/arch/h8300/include/uapi/asm/mman.h
deleted file mode 100644
index 8eebf89..0000000
--- a/arch/h8300/include/uapi/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/mman.h>
diff --git a/arch/h8300/include/uapi/asm/msgbuf.h b/arch/h8300/include/uapi/asm/msgbuf.h
deleted file mode 100644
index 6b148cd..0000000
--- a/arch/h8300/include/uapi/asm/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef _H8300_MSGBUF_H
-#define _H8300_MSGBUF_H
-
-/*
- * The msqid64_ds structure for H8/300 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _H8300_MSGBUF_H */
diff --git a/arch/h8300/include/uapi/asm/param.h b/arch/h8300/include/uapi/asm/param.h
deleted file mode 100644
index 3dd18ae..0000000
--- a/arch/h8300/include/uapi/asm/param.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _UAPI_H8300_PARAM_H
-#define _UAPI_H8300_PARAM_H
-
-#ifndef __KERNEL__
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _UAPI_H8300_PARAM_H */
diff --git a/arch/h8300/include/uapi/asm/poll.h b/arch/h8300/include/uapi/asm/poll.h
deleted file mode 100644
index f61540c..0000000
--- a/arch/h8300/include/uapi/asm/poll.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __H8300_POLL_H
-#define __H8300_POLL_H
-
-#define POLLWRNORM POLLOUT
-#define POLLWRBAND 256
-
-#include <asm-generic/poll.h>
-
-#undef POLLREMOVE
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/posix_types.h b/arch/h8300/include/uapi/asm/posix_types.h
deleted file mode 100644
index 91e62ba..0000000
--- a/arch/h8300/include/uapi/asm/posix_types.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef __ARCH_H8300_POSIX_TYPES_H
-#define __ARCH_H8300_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short __kernel_mode_t;
-#define __kernel_mode_t __kernel_mode_t
-
-typedef unsigned short __kernel_ipc_pid_t;
-#define __kernel_ipc_pid_t __kernel_ipc_pid_t
-
-typedef unsigned short __kernel_uid_t;
-typedef unsigned short __kernel_gid_t;
-#define __kernel_uid_t __kernel_uid_t
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-#define __kernel_old_uid_t __kernel_old_uid_t
-
-#include <asm-generic/posix_types.h>
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/ptrace.h b/arch/h8300/include/uapi/asm/ptrace.h
deleted file mode 100644
index ef39ec5..0000000
--- a/arch/h8300/include/uapi/asm/ptrace.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _UAPI_H8300_PTRACE_H
-#define _UAPI_H8300_PTRACE_H
-
-#ifndef __ASSEMBLY__
-
-#define PT_ER1 0
-#define PT_ER2 1
-#define PT_ER3 2
-#define PT_ER4 3
-#define PT_ER5 4
-#define PT_ER6 5
-#define PT_ER0 6
-#define PT_ORIG_ER0 7
-#define PT_CCR 8
-#define PT_PC 9
-#define PT_USP 10
-#define PT_EXR 12
-
-/* this struct defines the way the registers are stored on the
- stack during a system call. */
-
-struct pt_regs {
- long retpc;
- long er4;
- long er5;
- long er6;
- long er3;
- long er2;
- long er1;
- long orig_er0;
- unsigned short ccr;
- long er0;
- long vector;
-#if defined(CONFIG_CPU_H8S)
- unsigned short exr;
-#endif
- unsigned long pc;
-} __attribute__((aligned(2),packed));
-
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-
-#endif /* __ASSEMBLY__ */
-#endif /* _UAPI_H8300_PTRACE_H */
diff --git a/arch/h8300/include/uapi/asm/resource.h b/arch/h8300/include/uapi/asm/resource.h
deleted file mode 100644
index 46c5f43..0000000
--- a/arch/h8300/include/uapi/asm/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_RESOURCE_H
-#define _H8300_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* _H8300_RESOURCE_H */
diff --git a/arch/h8300/include/uapi/asm/sembuf.h b/arch/h8300/include/uapi/asm/sembuf.h
deleted file mode 100644
index e04a3ec..0000000
--- a/arch/h8300/include/uapi/asm/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _H8300_SEMBUF_H
-#define _H8300_SEMBUF_H
-
-/*
- * The semid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _H8300_SEMBUF_H */
diff --git a/arch/h8300/include/uapi/asm/setup.h b/arch/h8300/include/uapi/asm/setup.h
deleted file mode 100644
index e2c600e..0000000
--- a/arch/h8300/include/uapi/asm/setup.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __H8300_SETUP_H
-#define __H8300_SETUP_H
-
-#define COMMAND_LINE_SIZE 512
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/shmbuf.h b/arch/h8300/include/uapi/asm/shmbuf.h
deleted file mode 100644
index 64e7799..0000000
--- a/arch/h8300/include/uapi/asm/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _H8300_SHMBUF_H
-#define _H8300_SHMBUF_H
-
-/*
- * The shmid64_ds structure for m68k architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _H8300_SHMBUF_H */
diff --git a/arch/h8300/include/uapi/asm/sigcontext.h b/arch/h8300/include/uapi/asm/sigcontext.h
deleted file mode 100644
index e4b8150..0000000
--- a/arch/h8300/include/uapi/asm/sigcontext.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _ASM_H8300_SIGCONTEXT_H
-#define _ASM_H8300_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long sc_mask; /* old sigmask */
- unsigned long sc_usp; /* old user stack pointer */
- unsigned long sc_er0;
- unsigned long sc_er1;
- unsigned long sc_er2;
- unsigned long sc_er3;
- unsigned long sc_er4;
- unsigned long sc_er5;
- unsigned long sc_er6;
- unsigned short sc_ccr;
- unsigned long sc_pc;
-};
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/siginfo.h b/arch/h8300/include/uapi/asm/siginfo.h
deleted file mode 100644
index bc8fbea..0000000
--- a/arch/h8300/include/uapi/asm/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_SIGINFO_H
-#define _H8300_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/arch/h8300/include/uapi/asm/signal.h b/arch/h8300/include/uapi/asm/signal.h
deleted file mode 100644
index af3a6c3..0000000
--- a/arch/h8300/include/uapi/asm/signal.h
+++ /dev/null
@@ -1,115 +0,0 @@
-#ifndef _UAPI_H8300_SIGNAL_H
-#define _UAPI_H8300_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifndef __KERNEL__
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal-defs.h>
-
-#ifndef __KERNEL__
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-
-#endif /* _UAPI_H8300_SIGNAL_H */
diff --git a/arch/h8300/include/uapi/asm/socket.h b/arch/h8300/include/uapi/asm/socket.h
deleted file mode 100644
index 9490758..0000000
--- a/arch/h8300/include/uapi/asm/socket.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-#define SO_REUSEPORT 15
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-#define SO_GET_FILTER SO_ATTACH_FILTER
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#define SO_PROTOCOL 38
-#define SO_DOMAIN 39
-
-#define SO_RXQ_OVFL 40
-
-#define SO_WIFI_STATUS 41
-#define SCM_WIFI_STATUS SO_WIFI_STATUS
-#define SO_PEEK_OFF 42
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS 43
-
-#define SO_LOCK_FILTER 44
-
-#define SO_SELECT_ERR_QUEUE 45
-
-#define SO_BUSY_POLL 46
-
-#endif /* _ASM_SOCKET_H */
diff --git a/arch/h8300/include/uapi/asm/sockios.h b/arch/h8300/include/uapi/asm/sockios.h
deleted file mode 100644
index e9c7ec8..0000000
--- a/arch/h8300/include/uapi/asm/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_H8300_SOCKIOS__
-#define __ARCH_H8300_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* __ARCH_H8300_SOCKIOS__ */
diff --git a/arch/h8300/include/uapi/asm/stat.h b/arch/h8300/include/uapi/asm/stat.h
deleted file mode 100644
index 62c3cc2..0000000
--- a/arch/h8300/include/uapi/asm/stat.h
+++ /dev/null
@@ -1,78 +0,0 @@
-#ifndef _H8300_STAT_H
-#define _H8300_STAT_H
-
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
-struct stat {
- unsigned short st_dev;
- unsigned short __pad1;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned short __pad2;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long __unused1;
- unsigned long st_mtime;
- unsigned long __unused2;
- unsigned long st_ctime;
- unsigned long __unused3;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
- unsigned long long st_dev;
- unsigned char __pad1[2];
-
-#define STAT64_HAS_BROKEN_ST_INO 1
- unsigned long __st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned long long st_rdev;
- unsigned char __pad3[2];
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long __pad4; /* future possible st_blocks high bits */
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
-
- unsigned long long st_ino;
-};
-
-#endif /* _H8300_STAT_H */
diff --git a/arch/h8300/include/uapi/asm/statfs.h b/arch/h8300/include/uapi/asm/statfs.h
deleted file mode 100644
index b96efa7..0000000
--- a/arch/h8300/include/uapi/asm/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _H8300_STATFS_H
-#define _H8300_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* _H8300_STATFS_H */
diff --git a/arch/h8300/include/uapi/asm/swab.h b/arch/h8300/include/uapi/asm/swab.h
deleted file mode 100644
index 39abbf5..0000000
--- a/arch/h8300/include/uapi/asm/swab.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _H8300_SWAB_H
-#define _H8300_SWAB_H
-
-#include <linux/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _H8300_SWAB_H */
diff --git a/arch/h8300/include/uapi/asm/termbits.h b/arch/h8300/include/uapi/asm/termbits.h
deleted file mode 100644
index 3287a62..0000000
--- a/arch/h8300/include/uapi/asm/termbits.h
+++ /dev/null
@@ -1,201 +0,0 @@
-#ifndef __ARCH_H8300_TERMBITS_H__
-#define __ARCH_H8300_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-#define EXTPROC 0200000
-
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* __ARCH_H8300_TERMBITS_H__ */
diff --git a/arch/h8300/include/uapi/asm/termios.h b/arch/h8300/include/uapi/asm/termios.h
deleted file mode 100644
index 5a67d7e..0000000
--- a/arch/h8300/include/uapi/asm/termios.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _UAPI_H8300_TERMIOS_H
-#define _UAPI_H8300_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-
-#endif /* _UAPI_H8300_TERMIOS_H */
diff --git a/arch/h8300/include/uapi/asm/types.h b/arch/h8300/include/uapi/asm/types.h
deleted file mode 100644
index 9ec9d4c..0000000
--- a/arch/h8300/include/uapi/asm/types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/int-ll64.h>
diff --git a/arch/h8300/include/uapi/asm/unistd.h b/arch/h8300/include/uapi/asm/unistd.h
deleted file mode 100644
index 8cb5d42..0000000
--- a/arch/h8300/include/uapi/asm/unistd.h
+++ /dev/null
@@ -1,330 +0,0 @@
-#ifndef _UAPI_ASM_H8300_UNISTD_H_
-#define _UAPI_ASM_H8300_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_lchown 16
-#define __NR_break 17
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_mpx 56
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_oldolduname 59
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_ioperm 101
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_olduname 109
-#define __NR_iopl 110
-#define __NR_vhangup 111
-#define __NR_idle 112
-#define __NR_vm86old 113
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_modify_ldt 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_vm86 166
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_chown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_lchown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_chown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_mincore 218
-#define __NR_madvise 219
-#define __NR_madvise1 219
-#define __NR_getdents64 220
-#define __NR_fcntl64 221
-/* 223 is unused */
-#define __NR_gettid 224
-#define __NR_readahead 225
-#define __NR_setxattr 226
-#define __NR_lsetxattr 227
-#define __NR_fsetxattr 228
-#define __NR_getxattr 229
-#define __NR_lgetxattr 230
-#define __NR_fgetxattr 231
-#define __NR_listxattr 232
-#define __NR_llistxattr 233
-#define __NR_flistxattr 234
-#define __NR_removexattr 235
-#define __NR_lremovexattr 236
-#define __NR_fremovexattr 237
-#define __NR_tkill 238
-#define __NR_sendfile64 239
-#define __NR_futex 240
-#define __NR_sched_setaffinity 241
-#define __NR_sched_getaffinity 242
-#define __NR_set_thread_area 243
-#define __NR_get_thread_area 244
-#define __NR_io_setup 245
-#define __NR_io_destroy 246
-#define __NR_io_getevents 247
-#define __NR_io_submit 248
-#define __NR_io_cancel 249
-#define __NR_fadvise64 250
-/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
-#define __NR_exit_group 252
-#define __NR_lookup_dcookie 253
-#define __NR_epoll_create 254
-#define __NR_epoll_ctl 255
-#define __NR_epoll_wait 256
-#define __NR_remap_file_pages 257
-#define __NR_set_tid_address 258
-#define __NR_timer_create 259
-#define __NR_timer_settime (__NR_timer_create+1)
-#define __NR_timer_gettime (__NR_timer_create+2)
-#define __NR_timer_getoverrun (__NR_timer_create+3)
-#define __NR_timer_delete (__NR_timer_create+4)
-#define __NR_clock_settime (__NR_timer_create+5)
-#define __NR_clock_gettime (__NR_timer_create+6)
-#define __NR_clock_getres (__NR_timer_create+7)
-#define __NR_clock_nanosleep (__NR_timer_create+8)
-#define __NR_statfs64 268
-#define __NR_fstatfs64 269
-#define __NR_tgkill 270
-#define __NR_utimes 271
-#define __NR_fadvise64_64 272
-#define __NR_vserver 273
-#define __NR_mbind 274
-#define __NR_get_mempolicy 275
-#define __NR_set_mempolicy 276
-#define __NR_mq_open 277
-#define __NR_mq_unlink (__NR_mq_open+1)
-#define __NR_mq_timedsend (__NR_mq_open+2)
-#define __NR_mq_timedreceive (__NR_mq_open+3)
-#define __NR_mq_notify (__NR_mq_open+4)
-#define __NR_mq_getsetattr (__NR_mq_open+5)
-#define __NR_kexec_load 283
-#define __NR_waitid 284
-/* #define __NR_sys_setaltroot 285 */
-#define __NR_add_key 286
-#define __NR_request_key 287
-#define __NR_keyctl 288
-#define __NR_ioprio_set 289
-#define __NR_ioprio_get 290
-#define __NR_inotify_init 291
-#define __NR_inotify_add_watch 292
-#define __NR_inotify_rm_watch 293
-#define __NR_migrate_pages 294
-#define __NR_openat 295
-#define __NR_mkdirat 296
-#define __NR_mknodat 297
-#define __NR_fchownat 298
-#define __NR_futimesat 299
-#define __NR_fstatat64 300
-#define __NR_unlinkat 301
-#define __NR_renameat 302
-#define __NR_linkat 303
-#define __NR_symlinkat 304
-#define __NR_readlinkat 305
-#define __NR_fchmodat 306
-#define __NR_faccessat 307
-#define __NR_pselect6 308
-#define __NR_ppoll 309
-#define __NR_unshare 310
-#define __NR_set_robust_list 311
-#define __NR_get_robust_list 312
-#define __NR_splice 313
-#define __NR_sync_file_range 314
-#define __NR_tee 315
-#define __NR_vmsplice 316
-#define __NR_move_pages 317
-#define __NR_getcpu 318
-#define __NR_epoll_pwait 319
-#define __NR_setns 320
-
-#endif /* _UAPI_ASM_H8300_UNISTD_H_ */
diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile
deleted file mode 100644
index 1cc57f8..0000000
--- a/arch/h8300/kernel/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := vmlinux.lds
-
-obj-y := process.o traps.o ptrace.o irq.o \
- sys_h8300.o time.o signal.o \
- setup.o gpio.o syscalls.o \
- entry.o timer/
-
-obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o
diff --git a/arch/h8300/kernel/asm-offsets.c b/arch/h8300/kernel/asm-offsets.c
deleted file mode 100644
index fd961e0..0000000
--- a/arch/h8300/kernel/asm-offsets.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/kbuild.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/ptrace.h>
-
-int main(void)
-{
- /* offsets into the task struct */
- DEFINE(TASK_STATE, offsetof(struct task_struct, state));
- DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
- DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
- DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
- DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
- DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
- DEFINE(TASK_MM, offsetof(struct task_struct, mm));
- DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
-
- /* offsets into the irq_cpustat_t struct */
- DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
-
- /* offsets into the thread struct */
- DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
- DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
- DEFINE(THREAD_CCR, offsetof(struct thread_struct, ccr));
-
- /* offsets into the pt_regs struct */
- DEFINE(LER0, offsetof(struct pt_regs, er0) - sizeof(long));
- DEFINE(LER1, offsetof(struct pt_regs, er1) - sizeof(long));
- DEFINE(LER2, offsetof(struct pt_regs, er2) - sizeof(long));
- DEFINE(LER3, offsetof(struct pt_regs, er3) - sizeof(long));
- DEFINE(LER4, offsetof(struct pt_regs, er4) - sizeof(long));
- DEFINE(LER5, offsetof(struct pt_regs, er5) - sizeof(long));
- DEFINE(LER6, offsetof(struct pt_regs, er6) - sizeof(long));
- DEFINE(LORIG, offsetof(struct pt_regs, orig_er0) - sizeof(long));
- DEFINE(LCCR, offsetof(struct pt_regs, ccr) - sizeof(long));
- DEFINE(LVEC, offsetof(struct pt_regs, vector) - sizeof(long));
-#if defined(__H8300S__)
- DEFINE(LEXR, offsetof(struct pt_regs, exr) - sizeof(long));
-#endif
- DEFINE(LRET, offsetof(struct pt_regs, pc) - sizeof(long));
-
- DEFINE(PT_PTRACED, PT_PTRACED);
-
- return 0;
-}
diff --git a/arch/h8300/kernel/entry.S b/arch/h8300/kernel/entry.S
deleted file mode 100644
index 94bd30f..0000000
--- a/arch/h8300/kernel/entry.S
+++ /dev/null
@@ -1,402 +0,0 @@
-/* -*- mode: asm -*-
- *
- * linux/arch/h8300/platform/h8300h/entry.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- * David McCullough <davidm@snapgear.com>
- *
- */
-
-/*
- * entry.S
- * include exception/interrupt gateway
- * system call entry
- */
-
-#include <linux/sys.h>
-#include <asm/unistd.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/errno.h>
-
-#if defined(CONFIG_CPU_H8300H)
-#define USERRET 8
-INTERRUPTS = 64
- .h8300h
- .macro SHLL2 reg
- shll.l \reg
- shll.l \reg
- .endm
- .macro SHLR2 reg
- shlr.l \reg
- shlr.l \reg
- .endm
- .macro SAVEREGS
- mov.l er0,@-sp
- mov.l er1,@-sp
- mov.l er2,@-sp
- mov.l er3,@-sp
- .endm
- .macro RESTOREREGS
- mov.l @sp+,er3
- mov.l @sp+,er2
- .endm
- .macro SAVEEXR
- .endm
- .macro RESTOREEXR
- .endm
-#endif
-#if defined(CONFIG_CPU_H8S)
-#define USERRET 10
-#define USEREXR 8
-INTERRUPTS = 128
- .h8300s
- .macro SHLL2 reg
- shll.l #2,\reg
- .endm
- .macro SHLR2 reg
- shlr.l #2,\reg
- .endm
- .macro SAVEREGS
- stm.l er0-er3,@-sp
- .endm
- .macro RESTOREREGS
- ldm.l @sp+,er2-er3
- .endm
- .macro SAVEEXR
- mov.w @(USEREXR:16,er0),r1
- mov.w r1,@(LEXR-LER3:16,sp) /* copy EXR */
- .endm
- .macro RESTOREEXR
- mov.w @(LEXR-LER1:16,sp),r1 /* restore EXR */
- mov.b r1l,r1h
- mov.w r1,@(USEREXR:16,er0)
- .endm
-#endif
-
-
-/* CPU context save/restore macros. */
-
- .macro SAVE_ALL
- mov.l er0,@-sp
- stc ccr,r0l /* check kernel mode */
- btst #4,r0l
- bne 5f
-
- /* user mode */
- mov.l sp,@_sw_usp
- mov.l @sp,er0 /* restore saved er0 */
- orc #0x10,ccr /* switch kernel stack */
- mov.l @_sw_ksp,sp
- sub.l #(LRET-LORIG),sp /* allocate LORIG - LRET */
- SAVEREGS
- mov.l @_sw_usp,er0
- mov.l @(USERRET:16,er0),er1 /* copy the RET addr */
- mov.l er1,@(LRET-LER3:16,sp)
- SAVEEXR
-
- mov.l @(LORIG-LER3:16,sp),er0
- mov.l er0,@(LER0-LER3:16,sp) /* copy ER0 */
- mov.w e1,r1 /* e1 highbyte = ccr */
- and #0xef,r1h /* mask mode? flag */
- bra 6f
-5:
- /* kernel mode */
- mov.l @sp,er0 /* restore saved er0 */
- subs #2,sp /* set dummy ccr */
- SAVEREGS
- mov.w @(LRET-LER3:16,sp),r1 /* copy old ccr */
-6:
- mov.b r1h,r1l
- mov.b #0,r1h
- mov.w r1,@(LCCR-LER3:16,sp) /* set ccr */
- mov.l er6,@-sp /* syscall arg #6 */
- mov.l er5,@-sp /* syscall arg #5 */
- mov.l er4,@-sp /* syscall arg #4 */
- .endm /* r1 = ccr */
-
- .macro RESTORE_ALL
- mov.l @sp+,er4
- mov.l @sp+,er5
- mov.l @sp+,er6
- RESTOREREGS
- mov.w @(LCCR-LER1:16,sp),r0 /* check kernel mode */
- btst #4,r0l
- bne 7f
-
- orc #0x80,ccr
- mov.l @_sw_usp,er0
- mov.l @(LER0-LER1:16,sp),er1 /* restore ER0 */
- mov.l er1,@er0
- RESTOREEXR
- mov.w @(LCCR-LER1:16,sp),r1 /* restore the RET addr */
- mov.b r1l,r1h
- mov.b @(LRET+1-LER1:16,sp),r1l
- mov.w r1,e1
- mov.w @(LRET+2-LER1:16,sp),r1
- mov.l er1,@(USERRET:16,er0)
-
- mov.l @sp+,er1
- add.l #(LRET-LER1),sp /* remove LORIG - LRET */
- mov.l sp,@_sw_ksp
- andc #0xef,ccr /* switch to user mode */
- mov.l er0,sp
- bra 8f
-7:
- mov.l @sp+,er1
- adds #4,sp
- adds #2,sp
-8:
- mov.l @sp+,er0
- adds #4,sp /* remove the sw created LVEC */
- rte
- .endm
-
-.globl _system_call
-.globl _ret_from_exception
-.globl _ret_from_fork
-.globl _ret_from_kernel_thread
-.globl _ret_from_interrupt
-.globl _interrupt_redirect_table
-.globl _sw_ksp,_sw_usp
-.globl _resume
-.globl _interrupt_entry
-.globl _trace_break
-
-#if defined(CONFIG_ROMKERNEL)
- .section .int_redirect,"ax"
-_interrupt_redirect_table:
-#if defined(CONFIG_CPU_H8300H)
- .rept 7
- .long 0
- .endr
-#endif
-#if defined(CONFIG_CPU_H8S)
- .rept 5
- .long 0
- .endr
- jmp @_trace_break
- .long 0
-#endif
-
- jsr @_interrupt_entry /* NMI */
- jmp @_system_call /* TRAPA #0 (System call) */
- .long 0
- .long 0
- jmp @_trace_break /* TRAPA #3 (breakpoint) */
- .rept INTERRUPTS-12
- jsr @_interrupt_entry
- .endr
-#endif
-#if defined(CONFIG_RAMKERNEL)
-.globl _interrupt_redirect_table
- .section .bss
-_interrupt_redirect_table:
- .space 4
-#endif
-
- .section .text
- .align 2
-_interrupt_entry:
- SAVE_ALL
- mov.l sp,er0
- add.l #LVEC,er0
- btst #4,r1l
- bne 1f
- /* user LVEC */
- mov.l @_sw_usp,er0
- adds #4,er0
-1:
- mov.l @er0,er0 /* LVEC address */
-#if defined(CONFIG_ROMKERNEL)
- sub.l #_interrupt_redirect_table,er0
-#endif
-#if defined(CONFIG_RAMKERNEL)
- mov.l @_interrupt_redirect_table,er1
- sub.l er1,er0
-#endif
- SHLR2 er0
- dec.l #1,er0
- mov.l sp,er1
- subs #4,er1 /* adjust ret_pc */
- jsr @_do_IRQ
- jmp @_ret_from_interrupt
-
-_system_call:
- subs #4,sp /* dummy LVEC */
- SAVE_ALL
- andc #0x7f,ccr
- mov.l er0,er4
-
- /* save top of frame */
- mov.l sp,er0
- jsr @_set_esp0
- mov.l sp,er2
- and.w #0xe000,r2
- mov.b @((TI_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l
- btst #(TIF_SYSCALL_TRACE & 7),r2l
- beq 1f
- jsr @_do_syscall_trace
-1:
- cmp.l #NR_syscalls,er4
- bcc badsys
- SHLL2 er4
- mov.l #_sys_call_table,er0
- add.l er4,er0
- mov.l @er0,er4
- beq _ret_from_exception:16
- mov.l @(LER1:16,sp),er0
- mov.l @(LER2:16,sp),er1
- mov.l @(LER3:16,sp),er2
- jsr @er4
- mov.l er0,@(LER0:16,sp) /* save the return value */
- mov.l sp,er2
- and.w #0xe000,r2
- mov.b @((TI_FLAGS+3-(TIF_SYSCALL_TRACE >> 3)):16,er2),r2l
- btst #(TIF_SYSCALL_TRACE & 7),r2l
- beq 2f
- jsr @_do_syscall_trace
-2:
-#if defined(CONFIG_SYSCALL_PRINT)
- jsr @_syscall_print
-#endif
- orc #0x80,ccr
- bra resume_userspace
-
-badsys:
- mov.l #-ENOSYS,er0
- mov.l er0,@(LER0:16,sp)
- bra resume_userspace
-
-#if !defined(CONFIG_PREEMPT)
-#define resume_kernel restore_all
-#endif
-
-_ret_from_exception:
-#if defined(CONFIG_PREEMPT)
- orc #0x80,ccr
-#endif
-_ret_from_interrupt:
- mov.b @(LCCR+1:16,sp),r0l
- btst #4,r0l
- bne resume_kernel:8 /* return from kernel */
-resume_userspace:
- andc #0x7f,ccr
- mov.l sp,er4
- and.w #0xe000,r4 /* er4 <- current thread info */
- mov.l @(TI_FLAGS:16,er4),er1
- and.l #_TIF_WORK_MASK,er1
- beq restore_all:8
-work_pending:
- btst #TIF_NEED_RESCHED,r1l
- bne work_resched:8
- /* work notifysig */
- mov.l sp,er0
- subs #4,er0 /* er0: pt_regs */
- jsr @_do_notify_resume
- bra restore_all:8
-work_resched:
- mov.l sp,er0
- jsr @_set_esp0
- jsr @_schedule
- bra resume_userspace:8
-restore_all:
- RESTORE_ALL /* Does RTE */
-
-#if defined(CONFIG_PREEMPT)
-resume_kernel:
- mov.l @(TI_PRE_COUNT:16,er4),er0
- bne restore_all:8
-need_resched:
- mov.l @(TI_FLAGS:16,er4),er0
- btst #TIF_NEED_RESCHED,r0l
- beq restore_all:8
- mov.b @(LCCR+1:16,sp),r0l /* Interrupt Enabled? */
- bmi restore_all:8
- mov.l #PREEMPT_ACTIVE,er0
- mov.l er0,@(TI_PRE_COUNT:16,er4)
- andc #0x7f,ccr
- mov.l sp,er0
- jsr @_set_esp0
- jsr @_schedule
- orc #0x80,ccr
- bra need_resched:8
-#endif
-
-_ret_from_fork:
- mov.l er2,er0
- jsr @_schedule_tail
- jmp @_ret_from_exception
-
-_ret_from_kernel_thread:
- mov.l er2,er0
- jsr @_schedule_tail
- mov.l @(LER4:16,sp),er0
- mov.l @(LER5:16,sp),er1
- jsr @er1
- jmp @_ret_from_exception
-
-_resume:
- /*
- * Beware - when entering resume, offset of tss is in d1,
- * prev (the current task) is in a0, next (the new task)
- * is in a1 and d2.b is non-zero if the mm structure is
- * shared between the tasks, so don't change these
- * registers until their contents are no longer needed.
- */
-
- /* save sr */
- sub.w r3,r3
- stc ccr,r3l
- mov.w r3,@(THREAD_CCR+2:16,er0)
-
- /* disable interrupts */
- orc #0x80,ccr
- mov.l @_sw_usp,er3
- mov.l er3,@(THREAD_USP:16,er0)
- mov.l sp,@(THREAD_KSP:16,er0)
-
- /* Skip address space switching if they are the same. */
- /* FIXME: what did we hack out of here, this does nothing! */
-
- mov.l @(THREAD_USP:16,er1),er0
- mov.l er0,@_sw_usp
- mov.l @(THREAD_KSP:16,er1),sp
-
- /* restore status register */
- mov.w @(THREAD_CCR+2:16,er1),r3
-
- ldc r3l,ccr
- rts
-
-_trace_break:
- subs #4,sp
- SAVE_ALL
- sub.l er1,er1
- dec.l #1,er1
- mov.l er1,@(LORIG,sp)
- mov.l sp,er0
- jsr @_set_esp0
- mov.l @_sw_usp,er0
- mov.l @er0,er1
- mov.w @(-2:16,er1),r2
- cmp.w #0x5730,r2
- beq 1f
- subs #2,er1
- mov.l er1,@er0
-1:
- and.w #0xff,e1
- mov.l er1,er0
- jsr @_trace_trap
- jmp @_ret_from_exception
-
- .section .bss
-_sw_ksp:
- .space 4
-_sw_usp:
- .space 4
-
- .end
diff --git a/arch/h8300/kernel/gpio.c b/arch/h8300/kernel/gpio.c
deleted file mode 100644
index 084bfd0..0000000
--- a/arch/h8300/kernel/gpio.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * linux/arch/h8300/kernel/gpio.c
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- */
-
-/*
- * Internal I/O Port Management
- */
-
-#include <linux/stddef.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-
-#define _(addr) (volatile unsigned char *)(addr)
-#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
-#include <asm/regs306x.h>
-static volatile unsigned char *ddrs[] = {
- _(P1DDR),_(P2DDR),_(P3DDR),_(P4DDR),_(P5DDR),_(P6DDR),
- NULL, _(P8DDR),_(P9DDR),_(PADDR),_(PBDDR),
-};
-#define MAX_PORT 11
-#endif
-
- #if defined(CONFIG_H83002) || defined(CONFIG_H8048)
-/* Fix me!! */
-#include <asm/regs306x.h>
-static volatile unsigned char *ddrs[] = {
- _(P1DDR),_(P2DDR),_(P3DDR),_(P4DDR),_(P5DDR),_(P6DDR),
- NULL, _(P8DDR),_(P9DDR),_(PADDR),_(PBDDR),
-};
-#define MAX_PORT 11
-#endif
-
-#if defined(CONFIG_H8S2678)
-#include <asm/regs267x.h>
-static volatile unsigned char *ddrs[] = {
- _(P1DDR),_(P2DDR),_(P3DDR),NULL ,_(P5DDR),_(P6DDR),
- _(P7DDR),_(P8DDR),NULL, _(PADDR),_(PBDDR),_(PCDDR),
- _(PDDDR),_(PEDDR),_(PFDDR),_(PGDDR),_(PHDDR),
- _(PADDR),_(PBDDR),_(PCDDR),_(PDDDR),_(PEDDR),_(PFDDR),
- _(PGDDR),_(PHDDR)
-};
-#define MAX_PORT 17
-#endif
-#undef _
-
-#if !defined(P1DDR)
-#error Unsuppoted CPU Selection
-#endif
-
-static struct {
- unsigned char used;
- unsigned char ddr;
-} gpio_regs[MAX_PORT];
-
-extern char *_platform_gpio_table(int length);
-
-int h8300_reserved_gpio(int port, unsigned int bits)
-{
- unsigned char *used;
-
- if (port < 0 || port >= MAX_PORT)
- return -1;
- used = &(gpio_regs[port].used);
- if ((*used & bits) != 0)
- return 0;
- *used |= bits;
- return 1;
-}
-
-int h8300_free_gpio(int port, unsigned int bits)
-{
- unsigned char *used;
-
- if (port < 0 || port >= MAX_PORT)
- return -1;
- used = &(gpio_regs[port].used);
- if ((*used & bits) != bits)
- return 0;
- *used &= (~bits);
- return 1;
-}
-
-int h8300_set_gpio_dir(int port_bit,int dir)
-{
- int port = (port_bit >> 8) & 0xff;
- int bit = port_bit & 0xff;
-
- if (ddrs[port] == NULL)
- return 0;
- if (gpio_regs[port].used & bit) {
- if (dir)
- gpio_regs[port].ddr |= bit;
- else
- gpio_regs[port].ddr &= ~bit;
- *ddrs[port] = gpio_regs[port].ddr;
- return 1;
- } else
- return 0;
-}
-
-int h8300_get_gpio_dir(int port_bit)
-{
- int port = (port_bit >> 8) & 0xff;
- int bit = port_bit & 0xff;
-
- if (ddrs[port] == NULL)
- return 0;
- if (gpio_regs[port].used & bit) {
- return (gpio_regs[port].ddr & bit) != 0;
- } else
- return -1;
-}
-
-#if defined(CONFIG_PROC_FS)
-static char *port_status(int portno)
-{
- static char result[10];
- static const char io[2]={'I','O'};
- char *rp;
- int c;
- unsigned char used,ddr;
-
- used = gpio_regs[portno].used;
- ddr = gpio_regs[portno].ddr;
- result[8]='\0';
- rp = result + 7;
- for (c = 8; c > 0; c--,rp--,used >>= 1, ddr >>= 1)
- if (used & 0x01)
- *rp = io[ ddr & 0x01];
- else
- *rp = '-';
- return result;
-}
-
-static int gpio_proc_show(struct seq_file *m, void *v)
-{
- static const char port_name[]="123456789ABCDEFGH";
- int c;
-
- for (c = 0; c < MAX_PORT; c++) {
- if (ddrs[c] == NULL)
- continue;
- seq_printf(m, "P%c: %s\n", port_name[c], port_status(c));
- }
- return 0;
-}
-
-static int gpio_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, gpio_proc_show, PDE_DATA(inode));
-}
-
-static const struct file_operations gpio_proc_fops = {
- .open = gpio_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static __init int register_proc(void)
-{
- return proc_create("gpio", S_IRUGO, NULL, &gpio_proc_fops) != NULL;
-}
-
-__initcall(register_proc);
-#endif
-
-void __init h8300_gpio_init(void)
-{
- memcpy(gpio_regs,_platform_gpio_table(sizeof(gpio_regs)),sizeof(gpio_regs));
-}
diff --git a/arch/h8300/kernel/h8300_ksyms.c b/arch/h8300/kernel/h8300_ksyms.c
deleted file mode 100644
index 53d7c0e..0000000
--- a/arch/h8300/kernel/h8300_ksyms.c
+++ /dev/null
@@ -1,100 +0,0 @@
-#include <linux/module.h>
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-
-#include <asm/setup.h>
-#include <asm/pgalloc.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/checksum.h>
-#include <asm/current.h>
-#include <asm/gpio.h>
-
-//asmlinkage long long __ashrdi3 (long long, int);
-//asmlinkage long long __lshrdi3 (long long, int);
-extern char h8300_debug_device[];
-
-/* platform dependent support */
-
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strstr);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
-
-EXPORT_SYMBOL(ip_fast_csum);
-
-EXPORT_SYMBOL(enable_irq);
-EXPORT_SYMBOL(disable_irq);
-
-/* Networking helper routines. */
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-
-/* The following are special because they're not called
- explicitly (the C compiler generates them). Fortunately,
- their interface isn't gonna change any time soon now, so
- it's OK to leave it out of version control. */
-//EXPORT_SYMBOL(__ashrdi3);
-//EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memscan);
-EXPORT_SYMBOL(memmove);
-
-/*
- * libgcc functions - functions that are used internally by the
- * compiler... (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __gcc_bcmp(void);
-extern void __ashldi3(void);
-extern void __ashrdi3(void);
-extern void __cmpdi2(void);
-extern void __divdi3(void);
-extern void __divsi3(void);
-extern void __lshrdi3(void);
-extern void __moddi3(void);
-extern void __modsi3(void);
-extern void __muldi3(void);
-extern void __mulsi3(void);
-extern void __negdi2(void);
-extern void __ucmpdi2(void);
-extern void __udivdi3(void);
-extern void __udivmoddi4(void);
-extern void __udivsi3(void);
-extern void __umoddi3(void);
-extern void __umodsi3(void);
-
- /* gcc lib functions */
-EXPORT_SYMBOL(__gcc_bcmp);
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__cmpdi2);
-EXPORT_SYMBOL(__divdi3);
-EXPORT_SYMBOL(__divsi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__moddi3);
-EXPORT_SYMBOL(__modsi3);
-EXPORT_SYMBOL(__muldi3);
-EXPORT_SYMBOL(__mulsi3);
-EXPORT_SYMBOL(__negdi2);
-EXPORT_SYMBOL(__ucmpdi2);
-EXPORT_SYMBOL(__udivdi3);
-EXPORT_SYMBOL(__udivmoddi4);
-EXPORT_SYMBOL(__udivsi3);
-EXPORT_SYMBOL(__umoddi3);
-EXPORT_SYMBOL(__umodsi3);
-
-EXPORT_SYMBOL(h8300_reserved_gpio);
-EXPORT_SYMBOL(h8300_free_gpio);
-EXPORT_SYMBOL(h8300_set_gpio_dir);
diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c
deleted file mode 100644
index 2fa8ac7..0000000
--- a/arch/h8300/kernel/irq.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * linux/arch/h8300/kernel/irq.c
- *
- * Copyright 2007 Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/random.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/traps.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/errno.h>
-
-/*#define DEBUG*/
-
-extern unsigned long *interrupt_redirect_table;
-extern const int h8300_saved_vectors[];
-extern const h8300_vector h8300_trap_table[];
-int h8300_enable_irq_pin(unsigned int irq);
-void h8300_disable_irq_pin(unsigned int irq);
-
-#define CPU_VECTOR ((unsigned long *)0x000000)
-#define ADDR_MASK (0xffffff)
-
-static inline int is_ext_irq(unsigned int irq)
-{
- return (irq >= EXT_IRQ0 && irq <= (EXT_IRQ0 + EXT_IRQS));
-}
-
-static void h8300_enable_irq(struct irq_data *data)
-{
- if (is_ext_irq(data->irq))
- IER_REGS |= 1 << (data->irq - EXT_IRQ0);
-}
-
-static void h8300_disable_irq(struct irq_data *data)
-{
- if (is_ext_irq(data->irq))
- IER_REGS &= ~(1 << (data->irq - EXT_IRQ0));
-}
-
-static unsigned int h8300_startup_irq(struct irq_data *data)
-{
- if (is_ext_irq(data->irq))
- return h8300_enable_irq_pin(data->irq);
- else
- return 0;
-}
-
-static void h8300_shutdown_irq(struct irq_data *data)
-{
- if (is_ext_irq(data->irq))
- h8300_disable_irq_pin(data->irq);
-}
-
-/*
- * h8300 interrupt controller implementation
- */
-struct irq_chip h8300irq_chip = {
- .name = "H8300-INTC",
- .irq_startup = h8300_startup_irq,
- .irq_shutdown = h8300_shutdown_irq,
- .irq_enable = h8300_enable_irq,
- .irq_disable = h8300_disable_irq,
-};
-
-#if defined(CONFIG_RAMKERNEL)
-static unsigned long __init *get_vector_address(void)
-{
- unsigned long *rom_vector = CPU_VECTOR;
- unsigned long base,tmp;
- int vec_no;
-
- base = rom_vector[EXT_IRQ0] & ADDR_MASK;
-
- /* check romvector format */
- for (vec_no = EXT_IRQ1; vec_no <= EXT_IRQ0+EXT_IRQS; vec_no++) {
- if ((base+(vec_no - EXT_IRQ0)*4) != (rom_vector[vec_no] & ADDR_MASK))
- return NULL;
- }
-
- /* ramvector base address */
- base -= EXT_IRQ0*4;
-
- /* writerble check */
- tmp = ~(*(volatile unsigned long *)base);
- (*(volatile unsigned long *)base) = tmp;
- if ((*(volatile unsigned long *)base) != tmp)
- return NULL;
- return (unsigned long *)base;
-}
-
-static void __init setup_vector(void)
-{
- int i;
- unsigned long *ramvec,*ramvec_p;
- const h8300_vector *trap_entry;
- const int *saved_vector;
-
- ramvec = get_vector_address();
- if (ramvec == NULL)
- panic("interrupt vector serup failed.");
- else
- printk(KERN_INFO "virtual vector at 0x%08lx\n",(unsigned long)ramvec);
-
- /* create redirect table */
- ramvec_p = ramvec;
- trap_entry = h8300_trap_table;
- saved_vector = h8300_saved_vectors;
- for ( i = 0; i < NR_IRQS; i++) {
- if (i == *saved_vector) {
- ramvec_p++;
- saved_vector++;
- } else {
- if ( i < NR_TRAPS ) {
- if (*trap_entry)
- *ramvec_p = VECTOR(*trap_entry);
- ramvec_p++;
- trap_entry++;
- } else
- *ramvec_p++ = REDIRECT(interrupt_entry);
- }
- }
- interrupt_redirect_table = ramvec;
-#ifdef DEBUG
- ramvec_p = ramvec;
- for (i = 0; i < NR_IRQS; i++) {
- if ((i % 8) == 0)
- printk(KERN_DEBUG "\n%p: ",ramvec_p);
- printk(KERN_DEBUG "%p ",*ramvec_p);
- ramvec_p++;
- }
- printk(KERN_DEBUG "\n");
-#endif
-}
-#else
-#define setup_vector() do { } while(0)
-#endif
-
-void __init init_IRQ(void)
-{
- int c;
-
- setup_vector();
-
- for (c = 0; c < NR_IRQS; c++)
- irq_set_chip_and_handler(c, &h8300irq_chip, handle_simple_irq);
-}
-
-asmlinkage void do_IRQ(int irq)
-{
- irq_enter();
- generic_handle_irq(irq);
- irq_exit();
-}
diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c
deleted file mode 100644
index 1d526e0..0000000
--- a/arch/h8300/kernel/module.c
+++ /dev/null
@@ -1,75 +0,0 @@
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt...)
-#endif
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
- const char *strtab,
- unsigned int symindex,
- unsigned int relsec,
- struct module *me)
-{
- unsigned int i;
- Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
-
- DEBUGP("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
- for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
- /* This is where to make the change */
- uint32_t *loc = (uint32_t *)(sechdrs[sechdrs[relsec].sh_info].sh_addr
- + rela[i].r_offset);
- /* This is the symbol it is referring to. Note that all
- undefined symbols have been resolved. */
- Elf32_Sym *sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
- + ELF32_R_SYM(rela[i].r_info);
- uint32_t v = sym->st_value + rela[i].r_addend;
-
- switch (ELF32_R_TYPE(rela[i].r_info)) {
- case R_H8_DIR24R8:
- loc = (uint32_t *)((uint32_t)loc - 1);
- *loc = (*loc & 0xff000000) | ((*loc & 0xffffff) + v);
- break;
- case R_H8_DIR24A8:
- if (ELF32_R_SYM(rela[i].r_info))
- *loc += v;
- break;
- case R_H8_DIR32:
- case R_H8_DIR32A16:
- *loc += v;
- break;
- case R_H8_PCREL16:
- v -= (unsigned long)loc + 2;
- if ((Elf32_Sword)v > 0x7fff ||
- (Elf32_Sword)v < -(Elf32_Sword)0x8000)
- goto overflow;
- else
- *(unsigned short *)loc = v;
- break;
- case R_H8_PCREL8:
- v -= (unsigned long)loc + 1;
- if ((Elf32_Sword)v > 0x7f ||
- (Elf32_Sword)v < -(Elf32_Sword)0x80)
- goto overflow;
- else
- *(unsigned char *)loc = v;
- break;
- default:
- printk(KERN_ERR "module %s: Unknown relocation: %u\n",
- me->name, ELF32_R_TYPE(rela[i].r_info));
- return -ENOEXEC;
- }
- }
- return 0;
- overflow:
- printk(KERN_ERR "module %s: relocation offset overflow: %08x\n",
- me->name, rela[i].r_offset);
- return -ENOEXEC;
-}
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
deleted file mode 100644
index 1a744ab..0000000
--- a/arch/h8300/kernel/process.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * linux/arch/h8300/kernel/process.c
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Based on:
- *
- * linux/arch/m68knommu/kernel/process.c
- *
- * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
- * Kenneth Albanowski <kjahds@kjahds.com>,
- * The Silver Hammer Group, Ltd.
- *
- * linux/arch/m68k/kernel/process.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- */
-
-/*
- * This file handles the architecture-dependent parts of process handling..
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/rcupdate.h>
-
-#include <asm/uaccess.h>
-#include <asm/traps.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-asmlinkage void ret_from_fork(void);
-asmlinkage void ret_from_kernel_thread(void);
-
-/*
- * The idle loop on an H8/300..
- */
-#if !defined(CONFIG_H8300H_SIM) && !defined(CONFIG_H8S_SIM)
-void arch_cpu_idle(void)
-{
- local_irq_enable();
- /* XXX: race here! What if need_resched() gets set now? */
- __asm__("sleep");
-}
-#endif
-
-void machine_restart(char * __unused)
-{
- local_irq_disable();
- __asm__("jmp @@0");
-}
-
-void machine_halt(void)
-{
- local_irq_disable();
- __asm__("sleep");
- for (;;);
-}
-
-void machine_power_off(void)
-{
- local_irq_disable();
- __asm__("sleep");
- for (;;);
-}
-
-void show_regs(struct pt_regs * regs)
-{
- show_regs_print_info(KERN_DEFAULT);
-
- printk("\nPC: %08lx Status: %02x",
- regs->pc, regs->ccr);
- printk("\nORIG_ER0: %08lx ER0: %08lx ER1: %08lx",
- regs->orig_er0, regs->er0, regs->er1);
- printk("\nER2: %08lx ER3: %08lx ER4: %08lx ER5: %08lx",
- regs->er2, regs->er3, regs->er4, regs->er5);
- printk("\nER6' %08lx ",regs->er6);
- if (user_mode(regs))
- printk("USP: %08lx\n", rdusp());
- else
- printk("\n");
-}
-
-void flush_thread(void)
-{
-}
-
-int copy_thread(unsigned long clone_flags,
- unsigned long usp, unsigned long topstk,
- struct task_struct * p)
-{
- struct pt_regs * childregs;
-
- childregs = (struct pt_regs *) (THREAD_SIZE + task_stack_page(p)) - 1;
-
- if (unlikely(p->flags & PF_KTHREAD)) {
- memset(childregs, 0, sizeof(struct pt_regs));
- childregs->retpc = (unsigned long) ret_from_kernel_thread;
- childregs->er4 = topstk; /* arg */
- childregs->er5 = usp; /* fn */
- p->thread.ksp = (unsigned long)childregs;
- }
- *childregs = *current_pt_regs();
- childregs->retpc = (unsigned long) ret_from_fork;
- childregs->er0 = 0;
- p->thread.usp = usp ?: rdusp();
- p->thread.ksp = (unsigned long)childregs;
-
- return 0;
-}
-
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
- return ((struct pt_regs *)tsk->thread.esp0)->pc;
-}
-
-unsigned long get_wchan(struct task_struct *p)
-{
- unsigned long fp, pc;
- unsigned long stack_page;
- int count = 0;
- if (!p || p == current || p->state == TASK_RUNNING)
- return 0;
-
- stack_page = (unsigned long)p;
- fp = ((struct pt_regs *)p->thread.ksp)->er6;
- do {
- if (fp < stack_page+sizeof(struct thread_info) ||
- fp >= 8184+stack_page)
- return 0;
- pc = ((unsigned long *)fp)[1];
- if (!in_sched_functions(pc))
- return pc;
- fp = *(unsigned long *) fp;
- } while (count++ < 16);
- return 0;
-}
diff --git a/arch/h8300/kernel/ptrace.c b/arch/h8300/kernel/ptrace.c
deleted file mode 100644
index 748cf65..0000000
--- a/arch/h8300/kernel/ptrace.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * linux/arch/h8300/kernel/ptrace.c
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Based on:
- * linux/arch/m68k/kernel/ptrace.c
- *
- * Copyright (C) 1994 by Hamish Macdonald
- * Taken from linux/kernel/ptrace.c and modified for M680x0.
- * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/signal.h>
-
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/signal.h>
-
-/* cpu depend functions */
-extern long h8300_get_reg(struct task_struct *task, int regno);
-extern int h8300_put_reg(struct task_struct *task, int regno, unsigned long data);
-
-
-void user_disable_single_step(struct task_struct *child)
-{
-}
-
-/*
- * does not yet catch signals sent when the child dies.
- * in exit.c or in signal.c.
- */
-
-void ptrace_disable(struct task_struct *child)
-{
- user_disable_single_step(child);
-}
-
-long arch_ptrace(struct task_struct *child, long request,
- unsigned long addr, unsigned long data)
-{
- int ret;
- int regno = addr >> 2;
- unsigned long __user *datap = (unsigned long __user *) data;
-
- switch (request) {
- /* read the word at location addr in the USER area. */
- case PTRACE_PEEKUSR: {
- unsigned long tmp = 0;
-
- if ((addr & 3) || addr >= sizeof(struct user)) {
- ret = -EIO;
- break ;
- }
-
- ret = 0; /* Default return condition */
-
- if (regno < H8300_REGS_NO)
- tmp = h8300_get_reg(child, regno);
- else {
- switch (regno) {
- case 49:
- tmp = child->mm->start_code;
- break ;
- case 50:
- tmp = child->mm->start_data;
- break ;
- case 51:
- tmp = child->mm->end_code;
- break ;
- case 52:
- tmp = child->mm->end_data;
- break ;
- default:
- ret = -EIO;
- }
- }
- if (!ret)
- ret = put_user(tmp, datap);
- break ;
- }
-
- /* when I and D space are separate, this will have to be fixed. */
- case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
- if ((addr & 3) || addr >= sizeof(struct user)) {
- ret = -EIO;
- break ;
- }
-
- if (regno == PT_ORIG_ER0) {
- ret = -EIO;
- break ;
- }
- if (regno < H8300_REGS_NO) {
- ret = h8300_put_reg(child, regno, data);
- break ;
- }
- ret = -EIO;
- break ;
-
- case PTRACE_GETREGS: { /* Get all gp regs from the child. */
- int i;
- unsigned long tmp;
- for (i = 0; i < H8300_REGS_NO; i++) {
- tmp = h8300_get_reg(child, i);
- if (put_user(tmp, datap)) {
- ret = -EFAULT;
- break;
- }
- datap++;
- }
- ret = 0;
- break;
- }
-
- case PTRACE_SETREGS: { /* Set all gp regs in the child. */
- int i;
- unsigned long tmp;
- for (i = 0; i < H8300_REGS_NO; i++) {
- if (get_user(tmp, datap)) {
- ret = -EFAULT;
- break;
- }
- h8300_put_reg(child, i, tmp);
- datap++;
- }
- ret = 0;
- break;
- }
-
- default:
- ret = ptrace_request(child, request, addr, data);
- break;
- }
- return ret;
-}
-
-asmlinkage void do_syscall_trace(void)
-{
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return;
- if (!(current->ptrace & PT_PTRACED))
- return;
- ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0));
- /*
- * this isn't the same as continuing with a signal, but it will do
- * for normal use. strace only continues with a signal if the
- * stopping signal is not SIGTRAP. -brl
- */
- if (current->exit_code) {
- send_sig(current->exit_code, current, 1);
- current->exit_code = 0;
- }
-}
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
deleted file mode 100644
index d0b1607..0000000
--- a/arch/h8300/kernel/setup.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * linux/arch/h8300/kernel/setup.c
- *
- * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com}
- * Copyright (C) 1999,2000 Greg Ungerer (gerg@snapgear.com)
- * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@lineo.ca>
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1995 Hamish Macdonald
- * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
- * Copyright (C) 2001 Lineo, Inc. <www.lineo.com>
- *
- * H8/300 porting Yoshinori Sato <ysato@users.sourceforge.jp>
- */
-
-/*
- * This file handles the architecture-dependent parts of system setup
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/fb.h>
-#include <linux/console.h>
-#include <linux/genhd.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/major.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-
-#if defined(__H8300H__)
-#define CPU "H8/300H"
-#include <asm/regs306x.h>
-#endif
-
-#if defined(__H8300S__)
-#define CPU "H8S"
-#include <asm/regs267x.h>
-#endif
-
-#define STUBSIZE 0xc000
-
-unsigned long rom_length;
-unsigned long memory_start;
-unsigned long memory_end;
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-extern int _ramstart, _ramend;
-extern char _target_name[];
-extern void h8300_gpio_init(void);
-
-#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) \
- && defined(CONFIG_GDB_MAGICPRINT)
-/* printk with gdb service */
-static void gdb_console_output(struct console *c, const char *msg, unsigned len)
-{
- for (; len > 0; len--) {
- asm("mov.w %0,r2\n\t"
- "jsr @0xc4"::"r"(*msg++):"er2");
- }
-}
-
-/*
- * Setup initial baud/bits/parity. We do two things here:
- * - construct a cflag setting for the first rs_open()
- * - initialize the serial port
- * Return non-zero if we didn't find a serial port.
- */
-static int __init gdb_console_setup(struct console *co, char *options)
-{
- return 0;
-}
-
-static const struct console gdb_console = {
- .name = "gdb_con",
- .write = gdb_console_output,
- .device = NULL,
- .setup = gdb_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-#endif
-
-void __init setup_arch(char **cmdline_p)
-{
- int bootmap_size;
-
- memory_start = (unsigned long) &_ramstart;
-
- /* allow for ROMFS on the end of the kernel */
- if (memcmp((void *)memory_start, "-rom1fs-", 8) == 0) {
-#if defined(CONFIG_BLK_DEV_INITRD)
- initrd_start = memory_start;
- initrd_end = memory_start += be32_to_cpu(((unsigned long *) (memory_start))[2]);
-#else
- memory_start += be32_to_cpu(((unsigned long *) memory_start)[2]);
-#endif
- }
- memory_start = PAGE_ALIGN(memory_start);
-#if !defined(CONFIG_BLKDEV_RESERVE)
- memory_end = (unsigned long) &_ramend; /* by now the stack is part of the init task */
-#if defined(CONFIG_GDB_DEBUG)
- memory_end -= STUBSIZE;
-#endif
-#else
- if ((memory_end < CONFIG_BLKDEV_RESERVE_ADDRESS) &&
- (memory_end > CONFIG_BLKDEV_RESERVE_ADDRESS))
- /* overlap userarea */
- memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS;
-#endif
-
- init_mm.start_code = (unsigned long) _stext;
- init_mm.end_code = (unsigned long) _etext;
- init_mm.end_data = (unsigned long) _edata;
- init_mm.brk = (unsigned long) 0;
-
-#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
- register_console((struct console *)&gdb_console);
-#endif
-
- printk(KERN_INFO "\r\n\nuClinux " CPU "\n");
- printk(KERN_INFO "Target Hardware: %s\n",_target_name);
- printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
- printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
-
-#ifdef DEBUG
- printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p "
- "BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start,
- __bss_stop);
- printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx "
- "STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start,
- memory_end, memory_end, &_ramend);
-#endif
-
-#ifdef CONFIG_DEFAULT_CMDLINE
- /* set from default command line */
- if (*command_line == '\0')
- strcpy(command_line,CONFIG_KERNEL_COMMAND);
-#endif
- /* Keep a copy of command line */
- *cmdline_p = &command_line[0];
- memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE-1] = 0;
-
-#ifdef DEBUG
- if (strlen(*cmdline_p))
- printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
-#endif
-
- /*
- * give all the memory to the bootmap allocator, tell it to put the
- * boot mem_map at the start of memory
- */
- bootmap_size = init_bootmem_node(
- NODE_DATA(0),
- memory_start >> PAGE_SHIFT, /* map goes here */
- PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */
- memory_end >> PAGE_SHIFT);
- /*
- * free the usable memory, we have to make sure we do not free
- * the bootmem bitmap so we then reserve it after freeing it :-)
- */
- free_bootmem(memory_start, memory_end - memory_start);
- reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
- /*
- * get kmalloc into gear
- */
- paging_init();
- h8300_gpio_init();
-#if defined(CONFIG_H8300_AKI3068NET) && defined(CONFIG_IDE)
- {
-#define AREABIT(addr) (1 << (((addr) >> 21) & 7))
- /* setup BSC */
- volatile unsigned char *abwcr = (volatile unsigned char *)ABWCR;
- volatile unsigned char *cscr = (volatile unsigned char *)CSCR;
- *abwcr &= ~(AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT));
- *cscr |= (AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT)) | 0x0f;
- }
-#endif
-#ifdef DEBUG
- printk(KERN_DEBUG "Done setup_arch\n");
-#endif
-}
-
-/*
- * Get CPU information for use by the procfs.
- */
-
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
- char *cpu;
- int mode;
- u_long clockfreq;
-
- cpu = CPU;
- mode = *(volatile unsigned char *)MDCR & 0x07;
-
- clockfreq = CONFIG_CPU_CLOCK;
-
- seq_printf(m, "CPU:\t\t%s (mode:%d)\n"
- "Clock:\t\t%lu.%1luMHz\n"
- "BogoMips:\t%lu.%02lu\n"
- "Calibration:\t%lu loops\n",
- cpu,mode,
- clockfreq/1000,clockfreq%1000,
- (loops_per_jiffy*HZ)/500000,((loops_per_jiffy*HZ)/5000)%100,
- (loops_per_jiffy*HZ));
-
- return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- ++*pos;
- return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
- .show = show_cpuinfo,
-};
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
deleted file mode 100644
index a65ff3b..0000000
--- a/arch/h8300/kernel/signal.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * linux/arch/h8300/kernel/signal.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-/*
- * uClinux H8/300 support by Yoshinori Sato <ysato@users.sourceforge.jp>
- * and David McCullough <davidm@snapgear.com>
- *
- * Based on
- * Linux/m68k by Hamish Macdonald
- */
-
-/*
- * ++roman (07/09/96): implemented signal stacks (specially for tosemu on
- * Atari :-) Current limitation: Only one sigstack can be active at one time.
- * If a second signal with SA_ONSTACK set arrives while working on a sigstack,
- * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested
- * signal handlers!
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/syscalls.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/highuid.h>
-#include <linux/personality.h>
-#include <linux/tty.h>
-#include <linux/binfmts.h>
-#include <linux/tracehook.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/traps.h>
-#include <asm/ucontext.h>
-
-/*
- * Do a signal return; undo the signal stack.
- *
- * Keep the return code on the stack quadword aligned!
- * That makes the cache flush below easier.
- */
-
-struct sigframe
-{
- long dummy_er0;
- long dummy_vector;
-#if defined(CONFIG_CPU_H8S)
- short dummy_exr;
-#endif
- long dummy_pc;
- char *pretcode;
- unsigned char retcode[8];
- unsigned long extramask[_NSIG_WORDS-1];
- struct sigcontext sc;
- int sig;
-} __attribute__((aligned(2),packed));
-
-struct rt_sigframe
-{
- long dummy_er0;
- long dummy_vector;
-#if defined(CONFIG_CPU_H8S)
- short dummy_exr;
-#endif
- long dummy_pc;
- char *pretcode;
- struct siginfo *pinfo;
- void *puc;
- unsigned char retcode[8];
- struct siginfo info;
- struct ucontext uc;
- int sig;
-} __attribute__((aligned(2),packed));
-
-static inline int
-restore_sigcontext(struct sigcontext *usc, int *pd0)
-{
- struct pt_regs *regs = current_pt_regs();
- int err = 0;
- unsigned int ccr;
- unsigned int usp;
- unsigned int er0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-#define COPY(r) err |= __get_user(regs->r, &usc->sc_##r) /* restore passed registers */
- COPY(er1);
- COPY(er2);
- COPY(er3);
- COPY(er5);
- COPY(pc);
- ccr = regs->ccr & 0x10;
- COPY(ccr);
-#undef COPY
- regs->ccr &= 0xef;
- regs->ccr |= ccr;
- regs->orig_er0 = -1; /* disable syscall checks */
- err |= __get_user(usp, &usc->sc_usp);
- wrusp(usp);
-
- err |= __get_user(er0, &usc->sc_er0);
- *pd0 = er0;
- return err;
-}
-
-asmlinkage int sys_sigreturn(void)
-{
- unsigned long usp = rdusp();
- struct sigframe *frame = (struct sigframe *)(usp - 4);
- sigset_t set;
- int er0;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
- if (__get_user(set.sig[0], &frame->sc.sc_mask) ||
- (_NSIG_WORDS > 1 &&
- __copy_from_user(&set.sig[1], &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(&frame->sc, &er0))
- goto badframe;
- return er0;
-
-badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(void)
-{
- unsigned long usp = rdusp();
- struct rt_sigframe *frame = (struct rt_sigframe *)(usp - 4);
- sigset_t set;
- int er0;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
- goto badframe;
-
- set_current_blocked(&set);
-
- if (restore_sigcontext(&frame->uc.uc_mcontext, &er0))
- goto badframe;
-
- if (restore_altstack(&frame->uc.uc_stack))
- goto badframe;
-
- return er0;
-
-badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-static int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
- unsigned long mask)
-{
- int err = 0;
-
- err |= __put_user(regs->er0, &sc->sc_er0);
- err |= __put_user(regs->er1, &sc->sc_er1);
- err |= __put_user(regs->er2, &sc->sc_er2);
- err |= __put_user(regs->er3, &sc->sc_er3);
- err |= __put_user(regs->er4, &sc->sc_er4);
- err |= __put_user(regs->er5, &sc->sc_er5);
- err |= __put_user(regs->er6, &sc->sc_er6);
- err |= __put_user(rdusp(), &sc->sc_usp);
- err |= __put_user(regs->pc, &sc->sc_pc);
- err |= __put_user(regs->ccr, &sc->sc_ccr);
- err |= __put_user(mask, &sc->sc_mask);
-
- return err;
-}
-
-static inline void *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-{
- unsigned long usp;
-
- /* Default to using normal stack. */
- usp = rdusp();
-
- /* This is the X/Open sanctioned signal stack switching. */
- if (ka->sa.sa_flags & SA_ONSTACK) {
- if (!sas_ss_flags(usp))
- usp = current->sas_ss_sp + current->sas_ss_size;
- }
- return (void *)((usp - frame_size) & -8UL);
-}
-
-static int setup_frame (int sig, struct k_sigaction *ka,
- sigset_t *set, struct pt_regs *regs)
-{
- struct sigframe *frame;
- int err = 0;
- int usig;
- unsigned char *ret;
-
- frame = get_sigframe(ka, regs, sizeof(*frame));
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- usig = current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig;
-
- err |= __put_user(usig, &frame->sig);
- if (err)
- goto give_sigsegv;
-
- err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
- if (err)
- goto give_sigsegv;
-
- if (_NSIG_WORDS > 1) {
- err |= copy_to_user(frame->extramask, &set->sig[1],
- sizeof(frame->extramask));
- if (err)
- goto give_sigsegv;
- }
-
- ret = frame->retcode;
- if (ka->sa.sa_flags & SA_RESTORER)
- ret = (unsigned char *)(ka->sa.sa_restorer);
- else {
- /* sub.l er0,er0; mov.b #__NR_sigreturn,r0l; trapa #0 */
- err |= __put_user(0x1a80f800 + (__NR_sigreturn & 0xff),
- (unsigned long *)(frame->retcode + 0));
- err |= __put_user(0x5700, (unsigned short *)(frame->retcode + 4));
- }
-
- /* Set up to return from userspace. */
- err |= __put_user(ret, &frame->pretcode);
-
- if (err)
- goto give_sigsegv;
-
- /* Set up registers for signal handler */
- wrusp ((unsigned long) frame);
- regs->pc = (unsigned long) ka->sa.sa_handler;
- regs->er0 = (current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig);
- regs->er1 = (unsigned long)&(frame->sc);
- regs->er5 = current->mm->start_data; /* GOT base */
-
- return 0;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return -EFAULT;
-}
-
-static int setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs *regs)
-{
- struct rt_sigframe *frame;
- int err = 0;
- int usig;
- unsigned char *ret;
-
- frame = get_sigframe(ka, regs, sizeof(*frame));
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- usig = current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig;
-
- err |= __put_user(usig, &frame->sig);
- if (err)
- goto give_sigsegv;
-
- err |= __put_user(&frame->info, &frame->pinfo);
- err |= __put_user(&frame->uc, &frame->puc);
- err |= copy_siginfo_to_user(&frame->info, info);
- if (err)
- goto give_sigsegv;
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(0, &frame->uc.uc_link);
- err |= __save_altstack(&frame->uc.uc_stack, rdusp());
- err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
- err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set));
- if (err)
- goto give_sigsegv;
-
- /* Set up to return from userspace. */
- ret = frame->retcode;
- if (ka->sa.sa_flags & SA_RESTORER)
- ret = (unsigned char *)(ka->sa.sa_restorer);
- else {
- /* sub.l er0,er0; mov.b #__NR_sigreturn,r0l; trapa #0 */
- err |= __put_user(0x1a80f800 + (__NR_sigreturn & 0xff),
- (unsigned long *)(frame->retcode + 0));
- err |= __put_user(0x5700, (unsigned short *)(frame->retcode + 4));
- }
- err |= __put_user(ret, &frame->pretcode);
-
- if (err)
- goto give_sigsegv;
-
- /* Set up registers for signal handler */
- wrusp ((unsigned long) frame);
- regs->pc = (unsigned long) ka->sa.sa_handler;
- regs->er0 = (current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig);
- regs->er1 = (unsigned long)&(frame->info);
- regs->er2 = (unsigned long)&frame->uc;
- regs->er5 = current->mm->start_data; /* GOT base */
-
- return 0;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return -EFAULT;
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
- struct pt_regs * regs)
-{
- sigset_t *oldset = sigmask_to_save();
- int ret;
- /* are we from a system call? */
- if (regs->orig_er0 >= 0) {
- switch (regs->er0) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- regs->er0 = -EINTR;
- break;
-
- case -ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
- regs->er0 = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- regs->er0 = regs->orig_er0;
- regs->pc -= 2;
- }
- }
-
- /* set up the stack frame */
- if (ka->sa.sa_flags & SA_SIGINFO)
- ret = setup_rt_frame(sig, ka, info, oldset, regs);
- else
- ret = setup_frame(sig, ka, oldset, regs);
-
- if (!ret)
- signal_delivered(sig, info, ka, regs, 0);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-static void do_signal(struct pt_regs *regs)
-{
- siginfo_t info;
- int signr;
- struct k_sigaction ka;
-
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so.
- */
- if ((regs->ccr & 0x10))
- return;
-
- current->thread.esp0 = (unsigned long) regs;
-
- signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- /* Whee! Actually deliver the signal. */
- handle_signal(signr, &info, &ka, regs);
- return;
- }
- /* Did we come from a system call? */
- if (regs->orig_er0 >= 0) {
- /* Restart the system call - no handlers present */
- if (regs->er0 == -ERESTARTNOHAND ||
- regs->er0 == -ERESTARTSYS ||
- regs->er0 == -ERESTARTNOINTR) {
- regs->er0 = regs->orig_er0;
- regs->pc -= 2;
- }
- if (regs->er0 == -ERESTART_RESTARTBLOCK){
- regs->er0 = __NR_restart_syscall;
- regs->pc -= 2;
- }
- }
-
- /* If there's no signal to deliver, we just restore the saved mask. */
- restore_saved_sigmask();
-}
-
-asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
-{
- if (thread_info_flags & _TIF_SIGPENDING)
- do_signal(regs);
-
- if (thread_info_flags & _TIF_NOTIFY_RESUME) {
- clear_thread_flag(TIF_NOTIFY_RESUME);
- tracehook_notify_resume(regs);
- }
-}
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
deleted file mode 100644
index bf350cb..0000000
--- a/arch/h8300/kernel/sys_h8300.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/h8300/kernel/sys_h8300.c
- *
- * This file contains various random system calls that
- * have a non-standard calling sequence on the H8/300
- * platform.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/fs.h>
-#include <linux/ipc.h>
-
-#include <asm/setup.h>
-#include <asm/uaccess.h>
-#include <asm/cachectl.h>
-#include <asm/traps.h>
-#include <asm/unistd.h>
-
-/* sys_cacheflush -- no support. */
-asmlinkage int
-sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len)
-{
- return -EINVAL;
-}
-
-asmlinkage int sys_getpagesize(void)
-{
- return PAGE_SIZE;
-}
-
-#if defined(CONFIG_SYSCALL_PRINT)
-asmlinkage void syscall_print(void *dummy,...)
-{
- struct pt_regs *regs = (struct pt_regs *) ((unsigned char *)&dummy-4);
- printk("call %06lx:%ld 1:%08lx,2:%08lx,3:%08lx,ret:%08lx\n",
- ((regs->pc)&0xffffff)-2,regs->orig_er0,regs->er1,regs->er2,regs->er3,regs->er0);
-}
-#endif
diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S
deleted file mode 100644
index c55e0ed..0000000
--- a/arch/h8300/kernel/syscalls.S
+++ /dev/null
@@ -1,338 +0,0 @@
-/* Systemcall Entry Table */
-#include <linux/sys.h>
-#include <asm/linkage.h>
-#include <asm/unistd.h>
-
-#define CALL(x) .long _ ## x
-
-.globl _sys_call_table
-
-#if defined(CONFIG_CPU_H8300H)
- .h8300h
-#endif
-#if defined(CONFIG_CPU_H8S)
- .h8300s
-#endif
- .section .text
- .align 2
-_sys_call_table:
- CALL(sys_ni_syscall) /* 0 - old "setup()" system call*/
- CALL(sys_exit)
- CALL(sys_fork)
- CALL(sys_read)
- CALL(sys_write)
- CALL(sys_open) /* 5 */
- CALL(sys_close)
- CALL(sys_waitpid)
- CALL(sys_creat)
- CALL(sys_link)
- CALL(sys_unlink) /* 10 */
- CALL(sys_execve)
- CALL(sys_chdir)
- CALL(sys_time)
- CALL(sys_mknod)
- CALL(sys_chmod) /* 15 */
- CALL(sys_chown16)
- CALL(sys_ni_syscall) /* old break syscall holder */
- CALL(sys_stat)
- CALL(sys_lseek)
- CALL(sys_getpid) /* 20 */
- CALL(sys_mount)
- CALL(sys_oldumount)
- CALL(sys_setuid16)
- CALL(sys_getuid16)
- CALL(sys_stime) /* 25 */
- CALL(sys_ptrace)
- CALL(sys_alarm)
- CALL(sys_fstat)
- CALL(sys_pause)
- CALL(sys_utime) /* 30 */
- CALL(sys_ni_syscall) /* old stty syscall holder */
- CALL(sys_ni_syscall) /* old gtty syscall holder */
- CALL(sys_access)
- CALL(sys_nice)
- CALL(sys_ni_syscall) /* 35 old ftime syscall holder */
- CALL(sys_sync)
- CALL(sys_kill)
- CALL(sys_rename)
- CALL(sys_mkdir)
- CALL(sys_rmdir) /* 40 */
- CALL(sys_dup)
- CALL(sys_pipe)
- CALL(sys_times)
- CALL(sys_ni_syscall) /* old prof syscall holder */
- CALL(sys_brk) /* 45 */
- CALL(sys_setgid16)
- CALL(sys_getgid16)
- CALL(sys_signal)
- CALL(sys_geteuid16)
- CALL(sys_getegid16) /* 50 */
- CALL(sys_acct)
- CALL(sys_umount) /* recycled never used phys() */
- CALL(sys_ni_syscall) /* old lock syscall holder */
- CALL(sys_ioctl)
- CALL(sys_fcntl) /* 55 */
- CALL(sys_ni_syscall) /* old mpx syscall holder */
- CALL(sys_setpgid)
- CALL(sys_ni_syscall) /* old ulimit syscall holder */
- CALL(sys_ni_syscall)
- CALL(sys_umask) /* 60 */
- CALL(sys_chroot)
- CALL(sys_ustat)
- CALL(sys_dup2)
- CALL(sys_getppid)
- CALL(sys_getpgrp) /* 65 */
- CALL(sys_setsid)
- CALL(sys_sigaction)
- CALL(sys_sgetmask)
- CALL(sys_ssetmask)
- CALL(sys_setreuid16) /* 70 */
- CALL(sys_setregid16)
- CALL(sys_sigsuspend)
- CALL(sys_sigpending)
- CALL(sys_sethostname)
- CALL(sys_setrlimit) /* 75 */
- CALL(sys_old_getrlimit)
- CALL(sys_getrusage)
- CALL(sys_gettimeofday)
- CALL(sys_settimeofday)
- CALL(sys_getgroups16) /* 80 */
- CALL(sys_setgroups16)
- CALL(sys_old_select)
- CALL(sys_symlink)
- CALL(sys_lstat)
- CALL(sys_readlink) /* 85 */
- CALL(sys_uselib)
- CALL(sys_swapon)
- CALL(sys_reboot)
- CALL(sys_old_readdir)
- CALL(sys_old_mmap) /* 90 */
- CALL(sys_munmap)
- CALL(sys_truncate)
- CALL(sys_ftruncate)
- CALL(sys_fchmod)
- CALL(sys_fchown16) /* 95 */
- CALL(sys_getpriority)
- CALL(sys_setpriority)
- CALL(sys_ni_syscall) /* old profil syscall holder */
- CALL(sys_statfs)
- CALL(sys_fstatfs) /* 100 */
- CALL(sys_ni_syscall) /* ioperm for i386 */
- CALL(sys_socketcall)
- CALL(sys_syslog)
- CALL(sys_setitimer)
- CALL(sys_getitimer) /* 105 */
- CALL(sys_newstat)
- CALL(sys_newlstat)
- CALL(sys_newfstat)
- CALL(sys_ni_syscall)
- CALL(sys_ni_syscall) /* iopl for i386 */ /* 110 */
- CALL(sys_vhangup)
- CALL(sys_ni_syscall) /* obsolete idle() syscall */
- CALL(sys_ni_syscall) /* vm86old for i386 */
- CALL(sys_wait4)
- CALL(sys_swapoff) /* 115 */
- CALL(sys_sysinfo)
- CALL(sys_ipc)
- CALL(sys_fsync)
- CALL(sys_sigreturn)
- CALL(sys_clone) /* 120 */
- CALL(sys_setdomainname)
- CALL(sys_newuname)
- CALL(sys_cacheflush) /* modify_ldt for i386 */
- CALL(sys_adjtimex)
- CALL(sys_ni_syscall) /* 125 sys_mprotect */
- CALL(sys_sigprocmask)
- CALL(sys_ni_syscall) /* sys_create_module */
- CALL(sys_init_module)
- CALL(sys_delete_module)
- CALL(sys_ni_syscall) /* 130 sys_get_kernel_syms */
- CALL(sys_quotactl)
- CALL(sys_getpgid)
- CALL(sys_fchdir)
- CALL(sys_bdflush)
- CALL(sys_sysfs) /* 135 */
- CALL(sys_personality)
- CALL(sys_ni_syscall) /* for afs_syscall */
- CALL(sys_setfsuid16)
- CALL(sys_setfsgid16)
- CALL(sys_llseek) /* 140 */
- CALL(sys_getdents)
- CALL(sys_select)
- CALL(sys_flock)
- CALL(sys_ni_syscall) /* sys_msync */
- CALL(sys_readv) /* 145 */
- CALL(sys_writev)
- CALL(sys_getsid)
- CALL(sys_fdatasync)
- CALL(sys_sysctl)
- CALL(sys_ni_syscall) /* 150 sys_mlock */
- CALL(sys_ni_syscall) /* sys_munlock */
- CALL(sys_ni_syscall) /* sys_mlockall */
- CALL(sys_ni_syscall) /* sys_munlockall */
- CALL(sys_sched_setparam)
- CALL(sys_sched_getparam) /* 155 */
- CALL(sys_sched_setscheduler)
- CALL(sys_sched_getscheduler)
- CALL(sys_sched_yield)
- CALL(sys_sched_get_priority_max)
- CALL(sys_sched_get_priority_min) /* 160 */
- CALL(sys_sched_rr_get_interval)
- CALL(sys_nanosleep)
- CALL(sys_ni_syscall) /* sys_mremap */
- CALL(sys_setresuid16)
- CALL(sys_getresuid16) /* 165 */
- CALL(sys_ni_syscall) /* for vm86 */
- CALL(sys_ni_syscall) /* sys_query_module */
- CALL(sys_poll)
- CALL(sys_ni_syscall) /* old nfsservctl */
- CALL(sys_setresgid16) /* 170 */
- CALL(sys_getresgid16)
- CALL(sys_prctl)
- CALL(sys_rt_sigreturn)
- CALL(sys_rt_sigaction)
- CALL(sys_rt_sigprocmask) /* 175 */
- CALL(sys_rt_sigpending)
- CALL(sys_rt_sigtimedwait)
- CALL(sys_rt_sigqueueinfo)
- CALL(sys_rt_sigsuspend)
- CALL(sys_pread64) /* 180 */
- CALL(sys_pwrite64)
- CALL(sys_lchown16);
- CALL(sys_getcwd)
- CALL(sys_capget)
- CALL(sys_capset) /* 185 */
- CALL(sys_sigaltstack)
- CALL(sys_sendfile)
- CALL(sys_ni_syscall) /* streams1 */
- CALL(sys_ni_syscall) /* streams2 */
- CALL(sys_vfork) /* 190 */
- CALL(sys_getrlimit)
- CALL(sys_mmap_pgoff)
- CALL(sys_truncate64)
- CALL(sys_ftruncate64)
- CALL(sys_stat64) /* 195 */
- CALL(sys_lstat64)
- CALL(sys_fstat64)
- CALL(sys_chown)
- CALL(sys_getuid)
- CALL(sys_getgid) /* 200 */
- CALL(sys_geteuid)
- CALL(sys_getegid)
- CALL(sys_setreuid)
- CALL(sys_setregid)
- CALL(sys_getgroups) /* 205 */
- CALL(sys_setgroups)
- CALL(sys_fchown)
- CALL(sys_setresuid)
- CALL(sys_getresuid)
- CALL(sys_setresgid) /* 210 */
- CALL(sys_getresgid)
- CALL(sys_lchown)
- CALL(sys_setuid)
- CALL(sys_setgid)
- CALL(sys_setfsuid) /* 215 */
- CALL(sys_setfsgid)
- CALL(sys_pivot_root)
- CALL(sys_ni_syscall)
- CALL(sys_ni_syscall)
- CALL(sys_getdents64) /* 220 */
- CALL(sys_fcntl64)
- CALL(sys_ni_syscall) /* reserved TUX */
- CALL(sys_ni_syscall) /* reserved Security */
- CALL(sys_gettid)
- CALL(sys_readahead) /* 225 */
- CALL(sys_setxattr)
- CALL(sys_lsetxattr)
- CALL(sys_fsetxattr)
- CALL(sys_getxattr)
- CALL(sys_lgetxattr) /* 230 */
- CALL(sys_fgetxattr)
- CALL(sys_listxattr)
- CALL(sys_llistxattr)
- CALL(sys_flistxattr)
- CALL(sys_removexattr) /* 235 */
- CALL(sys_lremovexattr)
- CALL(sys_fremovexattr)
- CALL(sys_tkill)
- CALL(sys_sendfile64)
- CALL(sys_futex) /* 240 */
- CALL(sys_sched_setaffinity)
- CALL(sys_sched_getaffinity)
- CALL(sys_ni_syscall)
- CALL(sys_ni_syscall)
- CALL(sys_io_setup) /* 245 */
- CALL(sys_io_destroy)
- CALL(sys_io_getevents)
- CALL(sys_io_submit)
- CALL(sys_io_cancel)
- CALL(sys_fadvise64) /* 250 */
- CALL(sys_ni_syscall)
- CALL(sys_exit_group)
- CALL(sys_lookup_dcookie)
- CALL(sys_epoll_create)
- CALL(sys_epoll_ctl) /* 255 */
- CALL(sys_epoll_wait)
- CALL(sys_ni_syscall) /* sys_remap_file_pages */
- CALL(sys_set_tid_address)
- CALL(sys_timer_create)
- CALL(sys_timer_settime) /* 260 */
- CALL(sys_timer_gettime)
- CALL(sys_timer_getoverrun)
- CALL(sys_timer_delete)
- CALL(sys_clock_settime)
- CALL(sys_clock_gettime) /* 265 */
- CALL(sys_clock_getres)
- CALL(sys_clock_nanosleep)
- CALL(sys_statfs64)
- CALL(sys_fstatfs64)
- CALL(sys_tgkill) /* 270 */
- CALL(sys_utimes)
- CALL(sys_fadvise64_64)
- CALL(sys_ni_syscall) /* sys_vserver */
- CALL(sys_ni_syscall)
- CALL(sys_get_mempolicy) /* 275 */
- CALL(sys_set_mempolicy)
- CALL(sys_mq_open)
- CALL(sys_mq_unlink)
- CALL(sys_mq_timedsend)
- CALL(sys_mq_timedreceive) /* 280 */
- CALL(sys_mq_notify)
- CALL(sys_mq_getsetattr)
- CALL(sys_waitid)
- CALL(sys_ni_syscall) /* sys_kexec_load */
- CALL(sys_add_key) /* 285 */
- CALL(sys_request_key)
- CALL(sys_keyctl)
- CALL(sys_ioprio_set)
- CALL(sys_ioprio_get) /* 290 */
- CALL(sys_inotify_init)
- CALL(sys_inotify_add_watch)
- CALL(sys_inotify_rm_watch)
- CALL(sys_migrate_pages)
- CALL(sys_openat) /* 295 */
- CALL(sys_mkdirat)
- CALL(sys_mknodat)
- CALL(sys_fchownat)
- CALL(sys_futimesat)
- CALL(sys_fstatat64) /* 300 */
- CALL(sys_unlinkat)
- CALL(sys_renameat)
- CALL(sys_linkat)
- CALL(sys_symlinkat)
- CALL(sys_readlinkat) /* 305 */
- CALL(sys_fchmodat)
- CALL(sys_faccessat)
- CALL(sys_ni_syscall) /* sys_pselect6 */
- CALL(sys_ni_syscall) /* sys_ppoll */
- CALL(sys_unshare) /* 310 */
- CALL(sys_set_robust_list)
- CALL(sys_get_robust_list)
- CALL(sys_splice)
- CALL(sys_sync_file_range)
- CALL(sys_tee) /* 315 */
- CALL(sys_vmsplice)
- CALL(sys_ni_syscall) /* sys_move_pages */
- CALL(sys_getcpu)
- CALL(sys_ni_syscall) /* sys_epoll_pwait */
- CALL(sys_setns) /* 320 */
diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c
deleted file mode 100644
index e0f7419..0000000
--- a/arch/h8300/kernel/time.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/arch/h8300/kernel/time.c
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Copied/hacked from:
- *
- * linux/arch/m68k/kernel/time.c
- *
- * Copyright (C) 1991, 1992, 1995 Linus Torvalds
- *
- * This file contains the m68k-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * 1997-09-10 Updated NTP code according to technical memorandum Jan '96
- * "A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/timex.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-#include <asm/irq_regs.h>
-#include <asm/timer.h>
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-void h8300_timer_tick(void)
-{
- if (current->pid)
- profile_tick(CPU_PROFILING);
- xtime_update(1);
- update_process_times(user_mode(get_irq_regs()));
-}
-
-void read_persistent_clock(struct timespec *ts)
-{
- unsigned int year, mon, day, hour, min, sec;
-
- /* FIX by dqg : Set to zero for platforms that don't have tod */
- /* without this time is undefined and can overflow time_t, causing */
- /* very strange errors */
- year = 1980;
- mon = day = 1;
- hour = min = sec = 0;
-#ifdef CONFIG_H8300_GETTOD
- h8300_gettod (&year, &mon, &day, &hour, &min, &sec);
-#endif
- if ((year += 1900) < 1970)
- year += 100;
- ts->tv_sec = mktime(year, mon, day, hour, min, sec);
- ts->tv_nsec = 0;
-}
-
-void __init time_init(void)
-{
-
- h8300_timer_setup();
-}
diff --git a/arch/h8300/kernel/timer/Makefile b/arch/h8300/kernel/timer/Makefile
deleted file mode 100644
index bef0510..0000000
--- a/arch/h8300/kernel/timer/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# h8300 internal timer handler
-
-obj-$(CONFIG_H8300_TIMER8) := timer8.o
-obj-$(CONFIG_H8300_TIMER16) := timer16.o
-obj-$(CONFIG_H8300_ITU) := itu.o
-obj-$(CONFIG_H8300_TPU) := tpu.o
diff --git a/arch/h8300/kernel/timer/itu.c b/arch/h8300/kernel/timer/itu.c
deleted file mode 100644
index 0a8b5cd..0000000
--- a/arch/h8300/kernel/timer/itu.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * linux/arch/h8300/kernel/timer/itu.c
- *
- * Yoshinori Sato <ysato@users.sourcefoge.jp>
- *
- * ITU Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs306x.h>
-
-#if CONFIG_H8300_ITU_CH == 0
-#define ITUBASE 0xffff64
-#define ITUIRQ 24
-#elif CONFIG_H8300_ITU_CH == 1
-#define ITUBASE 0xffff6e
-#define ITUIRQ 28
-#elif CONFIG_H8300_ITU_CH == 2
-#define ITUBASE 0xffff78
-#define ITUIRQ 32
-#elif CONFIG_H8300_ITU_CH == 3
-#define ITUBASE 0xffff82
-#define ITUIRQ 36
-#elif CONFIG_H8300_ITU_CH == 4
-#define ITUBASE 0xffff92
-#define ITUIRQ 40
-#else
-#error Unknown timer channel.
-#endif
-
-#define TCR 0
-#define TIOR 1
-#define TIER 2
-#define TSR 3
-#define TCNT 4
-#define GRA 6
-#define GRB 8
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- h8300_timer_tick();
- ctrl_bclr(IMFA, ITUBASE + TSR);
- return IRQ_HANDLED;
-}
-
-static struct irqaction itu_irq = {
- .name = "itu",
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {1, 2, 4, 8};
-
-void __init h8300_timer_setup(void)
-{
- unsigned int div;
- unsigned int cnt;
-
- calc_param(cnt, div, divide_rate, 0x10000);
-
- setup_irq(ITUIRQ, &itu_irq);
-
- /* initialize timer */
- ctrl_outb(0, TSTR);
- ctrl_outb(CCLR0 | div, ITUBASE + TCR);
- ctrl_outb(0x01, ITUBASE + TIER);
- ctrl_outw(cnt, ITUBASE + GRA);
- ctrl_bset(CONFIG_H8300_ITU_CH, TSTR);
-}
diff --git a/arch/h8300/kernel/timer/timer16.c b/arch/h8300/kernel/timer/timer16.c
deleted file mode 100644
index 462d9f58..0000000
--- a/arch/h8300/kernel/timer/timer16.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * linux/arch/h8300/kernel/timer/timer16.c
- *
- * Yoshinori Sato <ysato@users.sourcefoge.jp>
- *
- * 16bit Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs306x.h>
-
-/* 16bit timer */
-#if CONFIG_H8300_TIMER16_CH == 0
-#define _16BASE 0xffff78
-#define _16IRQ 24
-#elif CONFIG_H8300_TIMER16_CH == 1
-#define _16BASE 0xffff80
-#define _16IRQ 28
-#elif CONFIG_H8300_TIMER16_CH == 2
-#define _16BASE 0xffff88
-#define _16IRQ 32
-#else
-#error Unknown timer channel.
-#endif
-
-#define TCR 0
-#define TIOR 1
-#define TCNT 2
-#define GRA 4
-#define GRB 6
-
-#define H8300_TIMER_FREQ CONFIG_CPU_CLOCK*10000 /* Timer input freq. */
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- h8300_timer_tick();
- ctrl_bclr(CONFIG_H8300_TIMER16_CH, TISRA);
- return IRQ_HANDLED;
-}
-
-static struct irqaction timer16_irq = {
- .name = "timer-16",
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {1, 2, 4, 8};
-
-void __init h8300_timer_setup(void)
-{
- unsigned int div;
- unsigned int cnt;
-
- calc_param(cnt, div, divide_rate, 0x10000);
-
- setup_irq(_16IRQ, &timer16_irq);
-
- /* initialize timer */
- ctrl_outb(0, TSTR);
- ctrl_outb(CCLR0 | div, _16BASE + TCR);
- ctrl_outw(cnt, _16BASE + GRA);
- ctrl_bset(4 + CONFIG_H8300_TIMER16_CH, TISRA);
- ctrl_bset(CONFIG_H8300_TIMER16_CH, TSTR);
-}
diff --git a/arch/h8300/kernel/timer/timer8.c b/arch/h8300/kernel/timer/timer8.c
deleted file mode 100644
index 505f341..0000000
--- a/arch/h8300/kernel/timer/timer8.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * linux/arch/h8300/kernel/cpu/timer/timer8.c
- *
- * Yoshinori Sato <ysato@users.sourcefoge.jp>
- *
- * 8bit Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/timer.h>
-#if defined(CONFIG_CPU_H8300H)
-#include <asm/regs306x.h>
-#endif
-#if defined(CONFIG_CPU_H8S)
-#include <asm/regs267x.h>
-#endif
-
-/* 8bit timer x2 */
-#define CMFA 6
-
-#if defined(CONFIG_H8300_TIMER8_CH0)
-#define _8BASE _8TCR0
-#ifdef CONFIG_CPU_H8300H
-#define _8IRQ 36
-#endif
-#ifdef CONFIG_CPU_H8S
-#define _8IRQ 72
-#endif
-#elif defined(CONFIG_H8300_TIMER8_CH2)
-#ifdef CONFIG_CPU_H8300H
-#define _8BASE _8TCR2
-#define _8IRQ 40
-#endif
-#endif
-
-#ifndef _8BASE
-#error Unknown timer channel.
-#endif
-
-#define _8TCR 0
-#define _8TCSR 2
-#define TCORA 4
-#define TCORB 6
-#define _8TCNT 8
-
-#define CMIEA 0x40
-#define CCLR_CMA 0x08
-#define CKS2 0x04
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "xtime_update()" routine every clocktick
- */
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- h8300_timer_tick();
- ctrl_bclr(CMFA, _8BASE + _8TCSR);
- return IRQ_HANDLED;
-}
-
-static struct irqaction timer8_irq = {
- .name = "timer-8",
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {8, 64, 8192};
-
-void __init h8300_timer_setup(void)
-{
- unsigned int div;
- unsigned int cnt;
-
- calc_param(cnt, div, divide_rate, 0x10000);
- div++;
-
- setup_irq(_8IRQ, &timer8_irq);
-
-#if defined(CONFIG_CPU_H8S)
- /* Timer module enable */
- ctrl_bclr(0, MSTPCRL)
-#endif
-
- /* initialize timer */
- ctrl_outw(cnt, _8BASE + TCORA);
- ctrl_outw(0x0000, _8BASE + _8TCSR);
- ctrl_outw((CMIEA|CCLR_CMA|CKS2) << 8 | div,
- _8BASE + _8TCR);
-}
diff --git a/arch/h8300/kernel/timer/tpu.c b/arch/h8300/kernel/timer/tpu.c
deleted file mode 100644
index 0350f62..0000000
--- a/arch/h8300/kernel/timer/tpu.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/arch/h8300/kernel/timer/tpu.c
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * TPU Timer Handler
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/regs267x.h>
-
-/* TPU */
-#if CONFIG_H8300_TPU_CH == 0
-#define TPUBASE 0xffffd0
-#define TPUIRQ 40
-#elif CONFIG_H8300_TPU_CH == 1
-#define TPUBASE 0xffffe0
-#define TPUIRQ 48
-#elif CONFIG_H8300_TPU_CH == 2
-#define TPUBASE 0xfffff0
-#define TPUIRQ 52
-#elif CONFIG_H8300_TPU_CH == 3
-#define TPUBASE 0xfffe80
-#define TPUIRQ 56
-#elif CONFIG_H8300_TPU_CH == 4
-#define TPUBASE 0xfffe90
-#define TPUIRQ 64
-#else
-#error Unknown timer channel.
-#endif
-
-#define _TCR 0
-#define _TMDR 1
-#define _TIOR 2
-#define _TIER 4
-#define _TSR 5
-#define _TCNT 6
-#define _GRA 8
-#define _GRB 10
-
-#define CCLR0 0x20
-
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- h8300_timer_tick();
- ctrl_bclr(0, TPUBASE + _TSR);
- return IRQ_HANDLED;
-}
-
-static struct irqaction tpu_irq = {
- .name = "tpu",
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER,
-};
-
-static const int __initconst divide_rate[] = {
-#if CONFIG_H8300_TPU_CH == 0
- 1,4,16,64,0,0,0,0,
-#elif (CONFIG_H8300_TPU_CH == 1) || (CONFIG_H8300_TPU_CH == 5)
- 1,4,16,64,0,0,256,0,
-#elif (CONFIG_H8300_TPU_CH == 2) || (CONFIG_H8300_TPU_CH == 4)
- 1,4,16,64,0,0,0,1024,
-#elif CONFIG_H8300_TPU_CH == 3
- 1,4,16,64,0,1024,256,4096,
-#endif
-};
-
-void __init h8300_timer_setup(void)
-{
- unsigned int cnt;
- unsigned int div;
-
- calc_param(cnt, div, divide_rate, 0x10000);
-
- setup_irq(TPUIRQ, &tpu_irq);
-
- /* TPU module enabled */
- ctrl_bclr(3, MSTPCRH);
-
- ctrl_outb(0, TSTR);
- ctrl_outb(CCLR0 | div, TPUBASE + _TCR);
- ctrl_outb(0, TPUBASE + _TMDR);
- ctrl_outw(0, TPUBASE + _TIOR);
- ctrl_outb(0x01, TPUBASE + _TIER);
- ctrl_outw(cnt, TPUBASE + _GRA);
- ctrl_bset(CONFIG_H8300_TPU_CH, TSTR);
-}
diff --git a/arch/h8300/kernel/traps.c b/arch/h8300/kernel/traps.c
deleted file mode 100644
index cfe494d..0000000
--- a/arch/h8300/kernel/traps.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * linux/arch/h8300/boot/traps.c -- general exception handling code
- * H8/300 support Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Cloned from Linux/m68k.
- *
- * No original Copyright holder listed,
- * Probable original (C) Roman Zippel (assigned DJD, 1999)
- *
- * Copyright 1999-2000 D. Jeff Dionne, <jeff@rt-control.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/bug.h>
-
-#include <asm/irq.h>
-#include <asm/traps.h>
-#include <asm/page.h>
-
-static DEFINE_SPINLOCK(die_lock);
-
-/*
- * this must be called very early as the kernel might
- * use some instruction that are emulated on the 060
- */
-
-void __init base_trap_init(void)
-{
-}
-
-void __init trap_init (void)
-{
-}
-
-asmlinkage void set_esp0 (unsigned long ssp)
-{
- current->thread.esp0 = ssp;
-}
-
-/*
- * Generic dumping code. Used for panic and debug.
- */
-
-static void dump(struct pt_regs *fp)
-{
- unsigned long *sp;
- unsigned char *tp;
- int i;
-
- printk("\nCURRENT PROCESS:\n\n");
- printk("COMM=%s PID=%d\n", current->comm, current->pid);
- if (current->mm) {
- printk("TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n",
- (int) current->mm->start_code,
- (int) current->mm->end_code,
- (int) current->mm->start_data,
- (int) current->mm->end_data,
- (int) current->mm->end_data,
- (int) current->mm->brk);
- printk("USER-STACK=%08x KERNEL-STACK=%08lx\n\n",
- (int) current->mm->start_stack,
- (int) PAGE_SIZE+(unsigned long)current);
- }
-
- show_regs(fp);
- printk("\nCODE:");
- tp = ((unsigned char *) fp->pc) - 0x20;
- for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
- if ((i % 0x10) == 0)
- printk("\n%08x: ", (int) (tp + i));
- printk("%08x ", (int) *sp++);
- }
- printk("\n");
-
- printk("\nKERNEL STACK:");
- tp = ((unsigned char *) fp) - 0x40;
- for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
- if ((i % 0x10) == 0)
- printk("\n%08x: ", (int) (tp + i));
- printk("%08x ", (int) *sp++);
- }
- printk("\n");
- if (STACK_MAGIC != *(unsigned long *)((unsigned long)current+PAGE_SIZE))
- printk("(Possibly corrupted stack page??)\n");
-
- printk("\n\n");
-}
-
-void die(const char *str, struct pt_regs *fp, unsigned long err)
-{
- static int diecount;
-
- oops_enter();
-
- console_verbose();
- spin_lock_irq(&die_lock);
- report_bug(fp->pc, fp);
- printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++diecount);
- dump(fp);
-
- spin_unlock_irq(&die_lock);
- do_exit(SIGSEGV);
-}
-
-extern char _start, _etext;
-#define check_kernel_text(addr) \
- ((addr >= (unsigned long)(&_start)) && \
- (addr < (unsigned long)(&_etext)))
-
-static int kstack_depth_to_print = 24;
-
-void show_stack(struct task_struct *task, unsigned long *esp)
-{
- unsigned long *stack, addr;
- int i;
-
- if (esp == NULL)
- esp = (unsigned long *) &esp;
-
- stack = esp;
-
- printk("Stack from %08lx:", (unsigned long)stack);
- for (i = 0; i < kstack_depth_to_print; i++) {
- if (((unsigned long)stack & (THREAD_SIZE - 1)) == 0)
- break;
- if (i % 8 == 0)
- printk("\n ");
- printk(" %08lx", *stack++);
- }
-
- printk("\nCall Trace:");
- i = 0;
- stack = esp;
- while (((unsigned long)stack & (THREAD_SIZE - 1)) != 0) {
- addr = *stack++;
- /*
- * If the address is either in the text segment of the
- * kernel, or in the region which contains vmalloc'ed
- * memory, it *may* be the address of a calling
- * routine; if so, print it so that someone tracing
- * down the cause of the crash will be able to figure
- * out the call path that was taken.
- */
- if (check_kernel_text(addr)) {
- if (i % 4 == 0)
- printk("\n ");
- printk(" [<%08lx>]", addr);
- i++;
- }
- }
- printk("\n");
-}
-
-void show_trace_task(struct task_struct *tsk)
-{
- show_stack(tsk,(unsigned long *)tsk->thread.esp0);
-}
diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
deleted file mode 100644
index 3253fed..0000000
--- a/arch/h8300/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,157 +0,0 @@
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/page.h>
-
-/* target memory map */
-#ifdef CONFIG_H8300H_GENERIC
-#define ROMTOP 0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x400000
-#endif
-
-#ifdef CONFIG_H8300H_AKI3068NET
-#define ROMTOP 0x000000
-#define ROMSIZE 0x080000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x200000
-#endif
-
-#ifdef CONFIG_H8300H_H8MAX
-#define ROMTOP 0x000000
-#define ROMSIZE 0x080000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x200000
-#endif
-
-#ifdef CONFIG_H8300H_SIM
-#define ROMTOP 0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x400000
-#endif
-
-#ifdef CONFIG_H8S_SIM
-#define ROMTOP 0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x800000
-#endif
-
-#ifdef CONFIG_H8S_EDOSK2674
-#define ROMTOP 0x000000
-#define ROMSIZE 0x400000
-#define RAMTOP 0x400000
-#define RAMSIZE 0x800000
-#endif
-
-#if defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)
-INPUT(romfs.o)
-#endif
-
-_jiffies = _jiffies_64 + 4;
-
-ENTRY(__start)
-
-SECTIONS
-{
-#if defined(CONFIG_ROMKERNEL)
- . = ROMTOP;
- .vectors :
- {
- __vector = . ;
- *(.vectors*)
- }
-#else
- . = RAMTOP;
- .bootvec :
- {
- *(.bootvec)
- }
-#endif
- .text :
- {
- _text = .;
-#if defined(CONFIG_ROMKERNEL)
- *(.int_redirect)
-#endif
- __stext = . ;
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- __etext = . ;
- }
- EXCEPTION_TABLE(16)
-
- RODATA
-#if defined(CONFIG_ROMKERNEL)
- SECURITY_INIT
-#endif
- ROEND = .;
-#if defined(CONFIG_ROMKERNEL)
- . = RAMTOP;
- .data : AT(ROEND)
-#else
- .data :
-#endif
- {
- __sdata = . ;
- ___data_start = . ;
-
- INIT_TASK_DATA(0x2000)
- . = ALIGN(0x4) ;
- DATA_DATA
- . = ALIGN(0x4) ;
- *(.data.*)
-
- . = ALIGN(0x4) ;
- ___init_begin = .;
- __sinittext = .;
- INIT_TEXT
- __einittext = .;
- INIT_DATA
- . = ALIGN(0x4) ;
- INIT_SETUP(0x4)
- ___setup_start = .;
- *(.init.setup)
- . = ALIGN(0x4) ;
- ___setup_end = .;
- INIT_CALLS
- CON_INITCALL
- EXIT_TEXT
- EXIT_DATA
- INIT_RAM_FS
- . = ALIGN(0x4) ;
- ___init_end = .;
- __edata = . ;
- }
-#if defined(CONFIG_RAMKERNEL)
- SECURITY_INIT
-#endif
- __begin_data = LOADADDR(.data);
- .bss :
- {
- . = ALIGN(0x4) ;
- __sbss = . ;
- ___bss_start = . ;
- *(.bss*)
- . = ALIGN(0x4) ;
- *(COMMON)
- . = ALIGN(0x4) ;
- ___bss_stop = . ;
- __ebss = . ;
- __end = . ;
- __ramstart = .;
- }
- .romfs :
- {
- *(.romfs*)
- }
- . = RAMTOP+RAMSIZE;
- .dummy :
- {
- COMMAND_START = . - 0x200 ;
- __ramend = . ;
- }
-
- DISCARDS
-}
diff --git a/arch/h8300/lib/Makefile b/arch/h8300/lib/Makefile
deleted file mode 100644
index 1577f507..0000000
--- a/arch/h8300/lib/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for H8/300-specific library files..
-#
-
-lib-y = ashrdi3.o checksum.o memcpy.o memset.o abs.o romfs.o
diff --git a/arch/h8300/lib/abs.S b/arch/h8300/lib/abs.S
deleted file mode 100644
index ddd1fb3..0000000
--- a/arch/h8300/lib/abs.S
+++ /dev/null
@@ -1,21 +0,0 @@
-;;; abs.S
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__)
- .h8300h
-#endif
-#if defined(__H8300S__)
- .h8300s
-#endif
- .text
-.global _abs
-
-;;; int abs(int n)
-_abs:
- mov.l er0,er0
- bpl 1f
- neg.l er0
-1:
- rts
-
diff --git a/arch/h8300/lib/ashrdi3.c b/arch/h8300/lib/ashrdi3.c
deleted file mode 100644
index 78efb65..0000000
--- a/arch/h8300/lib/ashrdi3.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-#define BITS_PER_UNIT 8
-
-typedef int SItype __attribute__ ((mode (SI)));
-typedef unsigned int USItype __attribute__ ((mode (SI)));
-typedef int DItype __attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
- struct DIstruct s;
- DItype ll;
-} DIunion;
-
-DItype
-__ashrdi3 (DItype u, word_type b)
-{
- DIunion w;
- word_type bm;
- DIunion uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
- if (bm <= 0)
- {
- /* w.s.high = 1..1 or 0..0 */
- w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
- w.s.low = uu.s.high >> -bm;
- }
- else
- {
- USItype carries = (USItype)uu.s.high << bm;
- w.s.high = uu.s.high >> b;
- w.s.low = ((USItype)uu.s.low >> b) | carries;
- }
-
- return w.ll;
-}
diff --git a/arch/h8300/lib/checksum.c b/arch/h8300/lib/checksum.c
deleted file mode 100644
index bdc5b03..0000000
--- a/arch/h8300/lib/checksum.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * INET An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
- *
- * IP/TCP/UDP checksumming routines
- *
- * Authors: Jorge Cwik, <jorge@laser.satlink.net>
- * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- * Tom May, <ftom@netcom.com>
- * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- * Lots of code moved from tcp.c and ip.c; see those files
- * for more names.
- *
- * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek:
- * Fixed some nasty bugs, causing some horrible crashes.
- * A: At some points, the sum (%0) was used as
- * length-counter instead of the length counter
- * (%1). Thanks to Roman Hodek for pointing this out.
- * B: GCC seems to mess up if one uses too many
- * data-registers to hold input values and one tries to
- * specify d0 and d1 as scratch registers. Letting gcc choose these
- * registers itself solves the problem.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most
- of the assembly has to go. */
-
-#include <net/checksum.h>
-#include <linux/module.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
- /* add up 16-bit and 16-bit for 16+c bit */
- x = (x & 0xffff) + (x >> 16);
- /* add up carry.. */
- x = (x & 0xffff) + (x >> 16);
- return x;
-}
-
-static unsigned long do_csum(const unsigned char * buff, int len)
-{
- int odd, count;
- unsigned long result = 0;
-
- if (len <= 0)
- goto out;
- odd = 1 & (unsigned long) buff;
- if (odd) {
- result = *buff;
- len--;
- buff++;
- }
- count = len >> 1; /* nr of 16-bit words.. */
- if (count) {
- if (2 & (unsigned long) buff) {
- result += *(unsigned short *) buff;
- count--;
- len -= 2;
- buff += 2;
- }
- count >>= 1; /* nr of 32-bit words.. */
- if (count) {
- unsigned long carry = 0;
- do {
- unsigned long w = *(unsigned long *) buff;
- count--;
- buff += 4;
- result += carry;
- result += w;
- carry = (w > result);
- } while (count);
- result += carry;
- result = (result & 0xffff) + (result >> 16);
- }
- if (len & 2) {
- result += *(unsigned short *) buff;
- buff += 2;
- }
- }
- if (len & 1)
- result += (*buff << 8);
- result = from32to16(result);
- if (odd)
- result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
- return result;
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- return (__force __sum16)~do_csum(iph,ihl*4);
-}
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-/*
- * Egads... That thing apparently assumes that *all* checksums it ever sees will
- * be folded. Very likely a bug.
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
- unsigned int result = do_csum(buff, len);
-
- /* add in old sum, and carry.. */
- result += (__force u32)sum;
- /* 16+c bits -> 16 bits */
- result = (result & 0xffff) + (result >> 16);
- return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
- return (__force __sum16)~do_csum(buff,len);
-}
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
- __wsum sum, int *csum_err)
-{
- if (csum_err) *csum_err = 0;
- memcpy(dst, (__force const void *)src, len);
- return csum_partial(dst, len, sum);
-}
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
-{
- memcpy(dst, src, len);
- return csum_partial(dst, len, sum);
-}
diff --git a/arch/h8300/lib/memcpy.S b/arch/h8300/lib/memcpy.S
deleted file mode 100644
index cad325e..0000000
--- a/arch/h8300/lib/memcpy.S
+++ /dev/null
@@ -1,84 +0,0 @@
-;;; memcpy.S
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__)
- .h8300h
-#endif
-#if defined(__H8300S__)
- .h8300s
-#endif
-
- .text
-.global _memcpy
-
-;;; void *memcpy(void *to, void *from, size_t n)
-_memcpy:
- mov.l er2,er2
- bne 1f
- rts
-1:
- ;; address check
- bld #0,r0l
- bxor #0,r1l
- bcs 4f
- mov.l er4,@-sp
- mov.l er0,@-sp
- btst #0,r0l
- beq 1f
- ;; (aligned even) odd address
- mov.b @er1,r3l
- mov.b r3l,@er0
- adds #1,er1
- adds #1,er0
- dec.l #1,er2
- beq 3f
-1:
- ;; n < sizeof(unsigned long) check
- sub.l er4,er4
- adds #4,er4 ; loop count check value
- cmp.l er4,er2
- blo 2f
- ;; unsigned long copy
-1:
- mov.l @er1,er3
- mov.l er3,@er0
- adds #4,er0
- adds #4,er1
- subs #4,er2
- cmp.l er4,er2
- bcc 1b
- ;; rest
-2:
- mov.l er2,er2
- beq 3f
-1:
- mov.b @er1,r3l
- mov.b r3l,@er0
- adds #1,er1
- adds #1,er0
- dec.l #1,er2
- bne 1b
-3:
- mov.l @sp+,er0
- mov.l @sp+,er4
- rts
-
- ;; odd <- even / even <- odd
-4:
- mov.l er4,er3
- mov.l er2,er4
- mov.l er5,er2
- mov.l er1,er5
- mov.l er6,er1
- mov.l er0,er6
-1:
- eepmov.w
- mov.w r4,r4
- bne 1b
- dec.w #1,e4
- bpl 1b
- mov.l er1,er6
- mov.l er2,er5
- mov.l er3,er4
- rts
diff --git a/arch/h8300/lib/memset.S b/arch/h8300/lib/memset.S
deleted file mode 100644
index 4549a64..0000000
--- a/arch/h8300/lib/memset.S
+++ /dev/null
@@ -1,61 +0,0 @@
-/* memset.S */
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__)
- .h8300h
-#endif
-#if defined(__H8300S__)
- .h8300s
-#endif
- .text
-
-.global _memset
-
-;;void *memset(*ptr, int c, size_t count)
-;; ptr = er0
-;; c = er1(r1l)
-;; count = er2
-_memset:
- btst #0,r0l
- beq 2f
-
- ;; odd address
-1:
- mov.b r1l,@er0
- adds #1,er0
- dec.l #1,er2
- beq 6f
-
- ;; even address
-2:
- mov.l er2,er3
- cmp.l #4,er2
- blo 4f
- ;; count>=4 -> count/4
-#if defined(__H8300H__)
- shlr.l er2
- shlr.l er2
-#endif
-#if defined(__H8300S__)
- shlr.l #2,er2
-#endif
- ;; byte -> long
- mov.b r1l,r1h
- mov.w r1,e1
-3:
- mov.l er1,@er0
- adds #4,er0
- dec.l #1,er2
- bne 3b
-4:
- ;; count % 4
- and.b #3,r3l
- beq 6f
-5:
- mov.b r1l,@er0
- adds #1,er0
- dec.b r3l
- bne 5b
-6:
- rts
diff --git a/arch/h8300/lib/romfs.S b/arch/h8300/lib/romfs.S
deleted file mode 100644
index 68910d8..0000000
--- a/arch/h8300/lib/romfs.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/* romfs move to __ebss */
-
-#include <asm/linkage.h>
-
-#if defined(__H8300H__)
- .h8300h
-#endif
-#if defined(__H8300S__)
- .h8300s
-#endif
-
-#define BLKOFFSET 512
-
- .text
-.globl __move_romfs
-_romfs_sig_len = 8
-
-__move_romfs:
- mov.l #__sbss,er0
- mov.l #_romfs_sig,er1
- mov.b #_romfs_sig_len,r3l
-1: /* check romfs image */
- mov.b @er0+,r2l
- mov.b @er1+,r2h
- cmp.b r2l,r2h
- bne 2f
- dec.b r3l
- bne 1b
-
- /* find romfs image */
- mov.l @__sbss+8,er0 /* romfs length(be) */
- mov.l #__sbss,er1
- add.l er0,er1 /* romfs image end */
- mov.l #__ebss,er2
- add.l er0,er2 /* distination address */
-#if defined(CONFIG_INTELFLASH)
- add.l #BLKOFFSET,er2
-#endif
- adds #2,er0
- adds #1,er0
- shlr er0
- shlr er0 /* transfer length */
-1:
- mov.l @er1,er3 /* copy image */
- mov.l er3,@er2
- subs #4,er1
- subs #4,er2
- dec.l #1,er0
- bpl 1b
-2:
- rts
-
- .section .rodata
-_romfs_sig:
- .ascii "-rom1fs-"
-
- .end
diff --git a/arch/h8300/mm/Makefile b/arch/h8300/mm/Makefile
deleted file mode 100644
index 5f4bc42..0000000
--- a/arch/h8300/mm/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux m68k-specific parts of the memory manager.
-#
-
-obj-y := init.o fault.o memory.o kmap.o
diff --git a/arch/h8300/mm/fault.c b/arch/h8300/mm/fault.c
deleted file mode 100644
index 4725359..0000000
--- a/arch/h8300/mm/fault.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * linux/arch/h8300/mm/fault.c
- *
- * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
- * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
- *
- * Based on:
- *
- * linux/arch/m68knommu/mm/fault.c
- * linux/arch/m68k/mm/fault.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-
-#include <asm/pgtable.h>
-
-/*
- * This routine handles page faults. It determines the problem, and
- * then passes it off to one of the appropriate routines.
- *
- * error_code:
- * bit 0 == 0 means no page found, 1 means protection fault
- * bit 1 == 0 means read, 1 means write
- *
- * If this routine detects a bad access, it returns 1, otherwise it
- * returns 0.
- */
-asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
- unsigned long error_code)
-{
-#ifdef DEBUG
- printk ("regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
- regs->sr, regs->pc, address, error_code);
-#endif
-
-/*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
- if ((unsigned long) address < PAGE_SIZE) {
- printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
- } else
- printk(KERN_ALERT "Unable to handle kernel access");
- printk(" at virtual address %08lx\n",address);
- if (!user_mode(regs))
- die("Oops", regs, error_code);
- do_exit(SIGKILL);
-
- return 1;
-}
-
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
deleted file mode 100644
index 6c1251e..0000000
--- a/arch/h8300/mm/init.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * linux/arch/h8300/mm/init.c
- *
- * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
- * Kenneth Albanowski <kjahds@kjahds.com>,
- * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
- *
- * Based on:
- *
- * linux/arch/m68knommu/mm/init.c
- * linux/arch/m68k/mm/init.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- *
- * JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com)
- * DEC/2000 -- linux 2.4 support <davidm@snapgear.com>
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <linux/bootmem.h>
-#include <linux/gfp.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-
-#undef DEBUG
-
-/*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving a inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-static unsigned long empty_bad_page_table;
-
-static unsigned long empty_bad_page;
-
-unsigned long empty_zero_page;
-
-extern unsigned long rom_length;
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-/*
- * paging_init() continues the virtual memory environment setup which
- * was begun by the code in arch/head.S.
- * The parameters are pointers to where to stick the starting and ending
- * addresses of available kernel virtual memory.
- */
-void __init paging_init(void)
-{
- /*
- * Make sure start_mem is page aligned, otherwise bootmem and
- * page_alloc get different views og the world.
- */
-#ifdef DEBUG
- unsigned long start_mem = PAGE_ALIGN(memory_start);
-#endif
- unsigned long end_mem = memory_end & PAGE_MASK;
-
-#ifdef DEBUG
- printk ("start_mem is %#lx\nvirtual_end is %#lx\n",
- start_mem, end_mem);
-#endif
-
- /*
- * Initialize the bad page table and bad page to point
- * to a couple of allocated pages.
- */
- empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
- empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
- empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
- memset((void *)empty_zero_page, 0, PAGE_SIZE);
-
- /*
- * Set up SFC/DFC registers (user data space).
- */
- set_fs (USER_DS);
-
-#ifdef DEBUG
- printk ("before free_area_init\n");
-
- printk ("free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n",
- start_mem, end_mem);
-#endif
-
- {
- unsigned long zones_size[MAX_NR_ZONES] = {0, };
-
- zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT;
- zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
-#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = 0;
-#endif
- free_area_init(zones_size);
- }
-}
-
-void __init mem_init(void)
-{
- unsigned long codesize = _etext - _stext;
-
- pr_devel("Mem_init: start=%lx, end=%lx\n", memory_start, memory_end);
-
- high_memory = (void *) (memory_end & PAGE_MASK);
- max_mapnr = MAP_NR(high_memory);
-
- /* this will put all low memory onto the freelists */
- free_all_bootmem();
-
- mem_init_print_info(NULL);
- if (rom_length > 0 && rom_length > codesize)
- pr_info("Memory available: %luK/%luK ROM\n",
- (rom_length - codesize) >> 10, rom_length >> 10);
-}
-
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
- free_reserved_area((void *)start, (void *)end, -1, "initrd");
-}
-#endif
-
-void
-free_initmem(void)
-{
-#ifdef CONFIG_RAMKERNEL
- free_initmem_default(-1);
-#endif
-}
-
diff --git a/arch/h8300/mm/kmap.c b/arch/h8300/mm/kmap.c
deleted file mode 100644
index f79edcd..0000000
--- a/arch/h8300/mm/kmap.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * linux/arch/h8300/mm/kmap.c
- *
- * Based on
- * linux/arch/m68knommu/mm/kmap.c
- *
- * Copyright (C) 2000 Lineo, <davidm@snapgear.com>
- * Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com>
- */
-
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/vmalloc.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/io.h>
-
-#undef DEBUG
-
-#define VIRT_OFFSET (0x01000000)
-
-/*
- * Map some physical address range into the kernel address space.
- */
-void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
-{
- return (void *)(physaddr + VIRT_OFFSET);
-}
-
-/*
- * Unmap a ioremap()ed region again.
- */
-void iounmap(void *addr)
-{
-}
-
-/*
- * __iounmap unmaps nearly everything, so be careful
- * it doesn't free currently pointer/page tables anymore but it
- * wans't used anyway and might be added later.
- */
-void __iounmap(void *addr, unsigned long size)
-{
-}
-
-/*
- * Set new cache mode for some kernel address space.
- * The caller must push data for that range itself, if such data may already
- * be in the cache.
- */
-void kernel_set_cachemode(void *addr, unsigned long size, int cmode)
-{
-}
diff --git a/arch/h8300/mm/memory.c b/arch/h8300/mm/memory.c
deleted file mode 100644
index 06e3646..0000000
--- a/arch/h8300/mm/memory.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/arch/h8300/mm/memory.c
- *
- * Copyright (C) 2002 Yoshinori Sato <ysato@users.sourceforge.jp>,
- *
- * Based on:
- *
- * linux/arch/m68knommu/mm/memory.c
- *
- * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
- * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *
- * Based on:
- *
- * linux/arch/m68k/mm/memory.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/traps.h>
-#include <asm/io.h>
-
-void cache_clear (unsigned long paddr, int len)
-{
-}
-
-
-void cache_push (unsigned long paddr, int len)
-{
-}
-
-void cache_push_v (unsigned long vaddr, int len)
-{
-}
-
-/*
- * Map some physical address range into the kernel address space.
- */
-
-unsigned long kernel_map(unsigned long paddr, unsigned long size,
- int nocacheflag, unsigned long *memavailp )
-{
- return paddr;
-}
-
diff --git a/arch/h8300/platform/h8300h/Makefile b/arch/h8300/platform/h8300h/Makefile
deleted file mode 100644
index 420f73b..0000000
--- a/arch/h8300/platform/h8300h/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-# Reuse any files we can from the H8/300H
-#
-
-obj-y := irq.o ptrace_h8300h.o
diff --git a/arch/h8300/platform/h8300h/aki3068net/Makefile b/arch/h8300/platform/h8300h/aki3068net/Makefile
deleted file mode 100644
index b7ff780..0000000
--- a/arch/h8300/platform/h8300h/aki3068net/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := crt0_ram.o
diff --git a/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S b/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S
deleted file mode 100644
index b2ad0f2..0000000
--- a/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8300h/aki3068net/crt0_ram.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: AE-3068 (aka. aki3068net)
- * Memory Layout : RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-
- .global __start
- .global _command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300h
-
- .section .text
- .file "crt0_ram.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #RAMEND,sp
- ldc #0x80,ccr
-
- /* Peripheral Setup */
-
-#if defined(CONFIG_MTD_UCLINUX)
- /* move romfs image */
- jsr @__move_romfs
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr er4
- shlr er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #_command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* uClinux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- .byte 0xff,0xff
- ;; P2DDR
- .byte 0xff,0xff
- ;; P3DDR
- .byte 0xff,0x00
- ;; P4DDR
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x01,0x01
- ;; P6DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x0c,0x0c
- ;; P9DDR
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x30,0x30
-
-__target_name:
- .asciz "AE-3068"
-
- .section .bootvec,"ax"
- jmp @__start
diff --git a/arch/h8300/platform/h8300h/generic/Makefile b/arch/h8300/platform/h8300h/generic/Makefile
deleted file mode 100644
index 2b12a17..0000000
--- a/arch/h8300/platform/h8300h/generic/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := crt0_$(MODEL).o
diff --git a/arch/h8300/platform/h8300h/generic/crt0_ram.S b/arch/h8300/platform/h8300h/generic/crt0_ram.S
deleted file mode 100644
index 5ab7d9c..0000000
--- a/arch/h8300/platform/h8300h/generic/crt0_ram.S
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8300h/generic/crt0_ram.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: AE-3068 (aka. aki3068net)
- * Memory Layout : RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-
- .global __start
- .global _command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300h
-
- .section .text
- .file "crt0_ram.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #RAMEND,sp
- ldc #0x80,ccr
-
- /* Peripheral Setup */
-
-#if defined(CONFIG_BLK_DEV_BLKMEM)
- /* move romfs image */
- jsr @__move_romfs
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr er4
- shlr er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #_command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* uClinux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x00,0x00
- ;; P4DDR
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; P9DDR
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x00,0x00
-
-__target_name:
- .asciz "generic"
diff --git a/arch/h8300/platform/h8300h/generic/crt0_rom.S b/arch/h8300/platform/h8300h/generic/crt0_rom.S
deleted file mode 100644
index dda1dfa..0000000
--- a/arch/h8300/platform/h8300h/generic/crt0_rom.S
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8300h/generic/crt0_rom.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: generic
- * Memory Layout : ROM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-
- .global __start
- .global __command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300h
- .section .text
- .file "crt0_rom.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #__ramend,sp
- ldc #0x80,ccr
-
- /* Peripheral Setup */
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr er4
- shlr er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy .data */
-#if !defined(CONFIG_H8300H_SIM)
- /* copy .data */
- mov.l #__begin_data,er5
- mov.l #__sdata,er6
- mov.l #__edata,er4
- sub.l er6,er4
- shlr.l er4
- shlr.l er4
-1:
- mov.l @er5+,er0
- mov.l er0,@er6
- adds #4,er6
- dec.l #1,er4
- bne 1b
-#endif
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #__command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* linux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x00,0x00
- ;; P4DDR
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; P9DDR
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x00,0x00
-
- .section .rodata
-__target_name:
- .asciz "generic"
-
- .section .bss
-__command_line:
- .space 512
-
- /* interrupt vector */
- .section .vectors,"ax"
- .long __start
-vector = 1
- .rept 64-1
- .long _interrupt_redirect_table+vector*4
-vector = vector + 1
- .endr
diff --git a/arch/h8300/platform/h8300h/h8max/Makefile b/arch/h8300/platform/h8300h/h8max/Makefile
deleted file mode 100644
index b7ff780..0000000
--- a/arch/h8300/platform/h8300h/h8max/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := crt0_ram.o
diff --git a/arch/h8300/platform/h8300h/h8max/crt0_ram.S b/arch/h8300/platform/h8300h/h8max/crt0_ram.S
deleted file mode 100644
index 6a0d4e2..0000000
--- a/arch/h8300/platform/h8300h/h8max/crt0_ram.S
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8300h/h8max/crt0_ram.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: H8MAX
- * Memory Layout : RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-
- .global __start
- .global _command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300h
-
- .section .text
- .file "crt0_ram.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #RAMEND,sp
- ldc #0x80,ccr
-
- /* Peripheral Setup */
-
-#if defined(CONFIG_MTD_UCLINUX)
- /* move romfs image */
- jsr @__move_romfs
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr er4
- shlr er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #_command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* uClinux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- .byte 0xff,0xff
- ;; P2DDR
- .byte 0xff,0xff
- ;; P3DDR
- .byte 0x00,0x00
- ;; P4DDR
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x01,0x01
- ;; P6DDR
- .byte 0xf6,0xf6
- ;; dummy
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0xee,0xee
- ;; P9DDR
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x30,0x30
-
-__target_name:
- .asciz "H8MAX"
-
- .section .bootvec,"ax"
- jmp @__start
diff --git a/arch/h8300/platform/h8300h/irq.c b/arch/h8300/platform/h8300h/irq.c
deleted file mode 100644
index 0a50353..0000000
--- a/arch/h8300/platform/h8300h/irq.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Interrupt handling H8/300H depend.
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/gpio-internal.h>
-#include <asm/regs306x.h>
-
-const int __initconst h8300_saved_vectors[] = {
-#if defined(CONFIG_GDB_DEBUG)
- TRAP3_VEC, /* TRAPA #3 is GDB breakpoint */
-#endif
- -1,
-};
-
-const h8300_vector __initconst h8300_trap_table[] = {
- 0, 0, 0, 0, 0, 0, 0, 0,
- system_call,
- 0,
- 0,
- trace_break,
-};
-
-int h8300_enable_irq_pin(unsigned int irq)
-{
- int bitmask;
- if (irq < EXT_IRQ0 || irq > EXT_IRQ5)
- return 0;
-
- /* initialize IRQ pin */
- bitmask = 1 << (irq - EXT_IRQ0);
- switch(irq) {
- case EXT_IRQ0:
- case EXT_IRQ1:
- case EXT_IRQ2:
- case EXT_IRQ3:
- if (H8300_GPIO_RESERVE(H8300_GPIO_P8, bitmask) == 0)
- return -EBUSY;
- H8300_GPIO_DDR(H8300_GPIO_P8, bitmask, H8300_GPIO_INPUT);
- break;
- case EXT_IRQ4:
- case EXT_IRQ5:
- if (H8300_GPIO_RESERVE(H8300_GPIO_P9, bitmask) == 0)
- return -EBUSY;
- H8300_GPIO_DDR(H8300_GPIO_P9, bitmask, H8300_GPIO_INPUT);
- break;
- }
-
- return 0;
-}
-
-void h8300_disable_irq_pin(unsigned int irq)
-{
- int bitmask;
- if (irq < EXT_IRQ0 || irq > EXT_IRQ5)
- return;
-
- /* disable interrupt & release IRQ pin */
- bitmask = 1 << (irq - EXT_IRQ0);
- switch(irq) {
- case EXT_IRQ0:
- case EXT_IRQ1:
- case EXT_IRQ2:
- case EXT_IRQ3:
- *(volatile unsigned char *)IER &= ~bitmask;
- H8300_GPIO_FREE(H8300_GPIO_P8, bitmask);
- break ;
- case EXT_IRQ4:
- case EXT_IRQ5:
- *(volatile unsigned char *)IER &= ~bitmask;
- H8300_GPIO_FREE(H8300_GPIO_P9, bitmask);
- break;
- }
-}
diff --git a/arch/h8300/platform/h8300h/ptrace_h8300h.c b/arch/h8300/platform/h8300h/ptrace_h8300h.c
deleted file mode 100644
index 4f1ed02..0000000
--- a/arch/h8300/platform/h8300h/ptrace_h8300h.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8300h/ptrace_h8300h.c
- * ptrace cpu depend helper functions
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <asm/ptrace.h>
-
-#define CCR_MASK 0x6f /* mode/imask not set */
-#define BREAKINST 0x5730 /* trapa #3 */
-
-/* Mapping from PT_xxx to the stack offset at which the register is
- saved. Notice that usp has no stack-slot and needs to be treated
- specially (see get_reg/put_reg below). */
-static const int h8300_register_offset[] = {
- PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4),
- PT_REG(er5), PT_REG(er6), PT_REG(er0), PT_REG(orig_er0),
- PT_REG(ccr), PT_REG(pc)
-};
-
-/* read register */
-long h8300_get_reg(struct task_struct *task, int regno)
-{
- switch (regno) {
- case PT_USP:
- return task->thread.usp + sizeof(long)*2;
- case PT_CCR:
- return *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
- default:
- return *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]);
- }
-}
-
-/* write register */
-int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
-{
- unsigned short oldccr;
- switch (regno) {
- case PT_USP:
- task->thread.usp = data - sizeof(long)*2;
- case PT_CCR:
- oldccr = *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
- oldccr &= ~CCR_MASK;
- data &= CCR_MASK;
- data |= oldccr;
- *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
- break;
- default:
- *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
- break;
- }
- return 0;
-}
-
-/* disable singlestep */
-void user_disable_single_step(struct task_struct *child)
-{
- if((long)child->thread.breakinfo.addr != -1L) {
- *child->thread.breakinfo.addr = child->thread.breakinfo.inst;
- child->thread.breakinfo.addr = (unsigned short *)-1L;
- }
-}
-
-/* calculate next pc */
-enum jump_type {none, /* normal instruction */
- jabs, /* absolute address jump */
- ind, /* indirect address jump */
- ret, /* return to subrutine */
- reg, /* register indexed jump */
- relb, /* pc relative jump (byte offset) */
- relw, /* pc relative jump (word offset) */
- };
-
-/* opcode decode table define
- ptn: opcode pattern
- msk: opcode bitmask
- len: instruction length (<0 next table index)
- jmp: jump operation mode */
-struct optable {
- unsigned char bitpattern;
- unsigned char bitmask;
- signed char length;
- signed char type;
-} __attribute__((aligned(1),packed));
-
-#define OPTABLE(ptn,msk,len,jmp) \
- { \
- .bitpattern = ptn, \
- .bitmask = msk, \
- .length = len, \
- .type = jmp, \
- }
-
-static const struct optable optable_0[] = {
- OPTABLE(0x00,0xff, 1,none), /* 0x00 */
- OPTABLE(0x01,0xff,-1,none), /* 0x01 */
- OPTABLE(0x02,0xfe, 1,none), /* 0x02-0x03 */
- OPTABLE(0x04,0xee, 1,none), /* 0x04-0x05/0x14-0x15 */
- OPTABLE(0x06,0xfe, 1,none), /* 0x06-0x07 */
- OPTABLE(0x08,0xea, 1,none), /* 0x08-0x09/0x0c-0x0d/0x18-0x19/0x1c-0x1d */
- OPTABLE(0x0a,0xee, 1,none), /* 0x0a-0x0b/0x1a-0x1b */
- OPTABLE(0x0e,0xee, 1,none), /* 0x0e-0x0f/0x1e-0x1f */
- OPTABLE(0x10,0xfc, 1,none), /* 0x10-0x13 */
- OPTABLE(0x16,0xfe, 1,none), /* 0x16-0x17 */
- OPTABLE(0x20,0xe0, 1,none), /* 0x20-0x3f */
- OPTABLE(0x40,0xf0, 1,relb), /* 0x40-0x4f */
- OPTABLE(0x50,0xfc, 1,none), /* 0x50-0x53 */
- OPTABLE(0x54,0xfd, 1,ret ), /* 0x54/0x56 */
- OPTABLE(0x55,0xff, 1,relb), /* 0x55 */
- OPTABLE(0x57,0xff, 1,none), /* 0x57 */
- OPTABLE(0x58,0xfb, 2,relw), /* 0x58/0x5c */
- OPTABLE(0x59,0xfb, 1,reg ), /* 0x59/0x5b */
- OPTABLE(0x5a,0xfb, 2,jabs), /* 0x5a/0x5e */
- OPTABLE(0x5b,0xfb, 2,ind ), /* 0x5b/0x5f */
- OPTABLE(0x60,0xe8, 1,none), /* 0x60-0x67/0x70-0x77 */
- OPTABLE(0x68,0xfa, 1,none), /* 0x68-0x69/0x6c-0x6d */
- OPTABLE(0x6a,0xfe,-2,none), /* 0x6a-0x6b */
- OPTABLE(0x6e,0xfe, 2,none), /* 0x6e-0x6f */
- OPTABLE(0x78,0xff, 4,none), /* 0x78 */
- OPTABLE(0x79,0xff, 2,none), /* 0x79 */
- OPTABLE(0x7a,0xff, 3,none), /* 0x7a */
- OPTABLE(0x7b,0xff, 2,none), /* 0x7b */
- OPTABLE(0x7c,0xfc, 2,none), /* 0x7c-0x7f */
- OPTABLE(0x80,0x80, 1,none), /* 0x80-0xff */
-};
-
-static const struct optable optable_1[] = {
- OPTABLE(0x00,0xff,-3,none), /* 0x0100 */
- OPTABLE(0x40,0xf0,-3,none), /* 0x0140-0x14f */
- OPTABLE(0x80,0xf0, 1,none), /* 0x0180-0x018f */
- OPTABLE(0xc0,0xc0, 2,none), /* 0x01c0-0x01ff */
-};
-
-static const struct optable optable_2[] = {
- OPTABLE(0x00,0x20, 2,none), /* 0x6a0?/0x6a8?/0x6b0?/0x6b8? */
- OPTABLE(0x20,0x20, 3,none), /* 0x6a2?/0x6aa?/0x6b2?/0x6ba? */
-};
-
-static const struct optable optable_3[] = {
- OPTABLE(0x69,0xfb, 2,none), /* 0x010069/0x01006d/014069/0x01406d */
- OPTABLE(0x6b,0xff,-4,none), /* 0x01006b/0x01406b */
- OPTABLE(0x6f,0xff, 3,none), /* 0x01006f/0x01406f */
- OPTABLE(0x78,0xff, 5,none), /* 0x010078/0x014078 */
-};
-
-static const struct optable optable_4[] = {
- OPTABLE(0x00,0x78, 3,none), /* 0x0100690?/0x01006d0?/0140690/0x01406d0?/0x0100698?/0x01006d8?/0140698?/0x01406d8? */
- OPTABLE(0x20,0x78, 4,none), /* 0x0100692?/0x01006d2?/0140692/0x01406d2?/0x010069a?/0x01006da?/014069a?/0x01406da? */
-};
-
-static const struct optables_list {
- const struct optable *ptr;
- int size;
-} optables[] = {
-#define OPTABLES(no) \
- { \
- .ptr = optable_##no, \
- .size = sizeof(optable_##no) / sizeof(struct optable), \
- }
- OPTABLES(0),
- OPTABLES(1),
- OPTABLES(2),
- OPTABLES(3),
- OPTABLES(4),
-
-};
-
-const unsigned char condmask[] = {
- 0x00,0x40,0x01,0x04,0x02,0x08,0x10,0x20
-};
-
-static int isbranch(struct task_struct *task,int reson)
-{
- unsigned char cond = h8300_get_reg(task, PT_CCR);
- /* encode complex conditions */
- /* B4: N^V
- B5: Z|(N^V)
- B6: C|Z */
- __asm__("bld #3,%w0\n\t"
- "bxor #1,%w0\n\t"
- "bst #4,%w0\n\t"
- "bor #2,%w0\n\t"
- "bst #5,%w0\n\t"
- "bld #2,%w0\n\t"
- "bor #0,%w0\n\t"
- "bst #6,%w0\n\t"
- :"=&r"(cond)::"cc");
- cond &= condmask[reson >> 1];
- if (!(reson & 1))
- return cond == 0;
- else
- return cond != 0;
-}
-
-static unsigned short *getnextpc(struct task_struct *child, unsigned short *pc)
-{
- const struct optable *op;
- unsigned char *fetch_p;
- unsigned char inst;
- unsigned long addr;
- unsigned long *sp;
- int op_len,regno;
- op = optables[0].ptr;
- op_len = optables[0].size;
- fetch_p = (unsigned char *)pc;
- inst = *fetch_p++;
- do {
- if ((inst & op->bitmask) == op->bitpattern) {
- if (op->length < 0) {
- op = optables[-op->length].ptr;
- op_len = optables[-op->length].size + 1;
- inst = *fetch_p++;
- } else {
- switch (op->type) {
- case none:
- return pc + op->length;
- case jabs:
- addr = *(unsigned long *)pc;
- return (unsigned short *)(addr & 0x00ffffff);
- case ind:
- addr = *pc & 0xff;
- return (unsigned short *)(*(unsigned long *)addr);
- case ret:
- sp = (unsigned long *)h8300_get_reg(child, PT_USP);
- /* user stack frames
- | er0 | temporary saved
- +--------+
- | exp | exception stack frames
- +--------+
- | ret pc | userspace return address
- */
- return (unsigned short *)(*(sp+2) & 0x00ffffff);
- case reg:
- regno = (*pc >> 4) & 0x07;
- if (regno == 0)
- addr = h8300_get_reg(child, PT_ER0);
- else
- addr = h8300_get_reg(child, regno-1+PT_ER1);
- return (unsigned short *)addr;
- case relb:
- if (inst == 0x55 || isbranch(child,inst & 0x0f))
- pc = (unsigned short *)((unsigned long)pc +
- ((signed char)(*fetch_p)));
- return pc+1; /* skip myself */
- case relw:
- if (inst == 0x5c || isbranch(child,(*fetch_p & 0xf0) >> 4))
- pc = (unsigned short *)((unsigned long)pc +
- ((signed short)(*(pc+1))));
- return pc+2; /* skip myself */
- }
- }
- } else
- op++;
- } while(--op_len > 0);
- return NULL;
-}
-
-/* Set breakpoint(s) to simulate a single step from the current PC. */
-
-void user_enable_single_step(struct task_struct *child)
-{
- unsigned short *nextpc;
- nextpc = getnextpc(child,(unsigned short *)h8300_get_reg(child, PT_PC));
- child->thread.breakinfo.addr = nextpc;
- child->thread.breakinfo.inst = *nextpc;
- *nextpc = BREAKINST;
-}
-
-asmlinkage void trace_trap(unsigned long bp)
-{
- if ((unsigned long)current->thread.breakinfo.addr == bp) {
- user_disable_single_step(current);
- force_sig(SIGTRAP,current);
- } else
- force_sig(SIGILL,current);
-}
-
diff --git a/arch/h8300/platform/h8s/Makefile b/arch/h8300/platform/h8s/Makefile
deleted file mode 100644
index bf12418..0000000
--- a/arch/h8300/platform/h8s/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-# Reuse any files we can from the H8S
-#
-
-obj-y := ints_h8s.o ptrace_h8s.o
diff --git a/arch/h8300/platform/h8s/edosk2674/Makefile b/arch/h8300/platform/h8s/edosk2674/Makefile
deleted file mode 100644
index 8e34972..0000000
--- a/arch/h8300/platform/h8s/edosk2674/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y := crt0_$(MODEL).o
diff --git a/arch/h8300/platform/h8s/edosk2674/crt0_ram.S b/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
deleted file mode 100644
index 5ed191b..0000000
--- a/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: EDOSK-2674
- * Memory Layout : RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-
- .global __start
- .global __command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300s
-
- .section .text
- .file "crt0_ram.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #RAMEND,sp
- ldc #0x80,ccr
- ldc #0x00,exr
-
- /* Peripheral Setup */
- bclr #4,@INTCR:8 /* interrupt mode 2 */
- bset #5,@INTCR:8
- bclr #0,@IER+1:16
- bset #1,@ISCRL+1:16 /* IRQ0 Positive Edge */
- bclr #0,@ISCRL+1:16
-
-#if defined(CONFIG_MTD_UCLINUX)
- /* move romfs image */
- jsr @__move_romfs
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l er5,er6
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr #2,er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #_command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* uClinux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- ;; used,ddr
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x3f,0x3a
- ;; dummy
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; P7DDR
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; PADDR
- .byte 0xff,0xff
- ;; PBDDR
- .byte 0xff,0x00
- ;; PCDDR
- .byte 0xff,0x00
- ;; PDDDR
- .byte 0xff,0x00
- ;; PEDDR
- .byte 0xff,0x00
- ;; PFDDR
- .byte 0xff,0xff
- ;; PGDDR
- .byte 0x0f,0x0f
- ;; PHDDR
- .byte 0x0f,0x0f
-
-__target_name:
- .asciz "EDOSK-2674"
-
- .section .bootvec,"ax"
- jmp @__start
diff --git a/arch/h8300/platform/h8s/edosk2674/crt0_rom.S b/arch/h8300/platform/h8s/edosk2674/crt0_rom.S
deleted file mode 100644
index 06d1d7f..0000000
--- a/arch/h8300/platform/h8s/edosk2674/crt0_rom.S
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8s/edosk2674/crt0_rom.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: EDOSK-2674
- * Memory Layout : ROM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-
- .global __start
- .global __command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300s
- .section .text
- .file "crt0_rom.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #__ramend,sp
- ldc #0x80,ccr
- ldc #0,exr
-
- /* Peripheral Setup */
-;BSC/GPIO setup
- mov.l #init_regs,er0
- mov.w #0xffff,e2
-1:
- mov.w @er0+,r2
- beq 2f
- mov.w @er0+,r1
- mov.b r1l,@er2
- bra 1b
-
-2:
-;SDRAM setup
-#define SDRAM_SMR 0x400040
-
- mov.b #0,r0l
- mov.b r0l,@DRACCR:16
- mov.w #0x188,r0
- mov.w r0,@REFCR:16
- mov.w #0x85b4,r0
- mov.w r0,@DRAMCR:16
- mov.b #0,r1l
- mov.b r1l,@SDRAM_SMR
- mov.w #0x84b4,r0
- mov.w r0,@DRAMCR:16
-;special thanks to Arizona Cooperative Power
-
- /* copy .data */
- mov.l #__begin_data,er5
- mov.l #__sdata,er6
- mov.l #__edata,er4
- sub.l er6,er4
- shlr.l #2,er4
-1:
- mov.l @er5+,er0
- mov.l er0,@er6
- adds #4,er6
- dec.l #1,er4
- bne 1b
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr.l #2,er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #__command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* linux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-#define INIT_REGS_DATA(REGS,DATA) \
- .word ((REGS) & 0xffff),DATA
-
-init_regs:
-INIT_REGS_DATA(ASTCR,0xff)
-INIT_REGS_DATA(RDNCR,0x00)
-INIT_REGS_DATA(ABWCR,0x80)
-INIT_REGS_DATA(WTCRAH,0x27)
-INIT_REGS_DATA(WTCRAL,0x77)
-INIT_REGS_DATA(WTCRBH,0x71)
-INIT_REGS_DATA(WTCRBL,0x22)
-INIT_REGS_DATA(CSACRH,0x80)
-INIT_REGS_DATA(CSACRL,0x80)
-INIT_REGS_DATA(BROMCRH,0xa0)
-INIT_REGS_DATA(BROMCRL,0xa0)
-INIT_REGS_DATA(P3DDR,0x3a)
-INIT_REGS_DATA(P3ODR,0x06)
-INIT_REGS_DATA(PADDR,0xff)
-INIT_REGS_DATA(PFDDR,0xfe)
-INIT_REGS_DATA(PGDDR,0x0f)
-INIT_REGS_DATA(PHDDR,0x0f)
-INIT_REGS_DATA(PFCR0,0xff)
-INIT_REGS_DATA(PFCR2,0x0d)
-INIT_REGS_DATA(ITSR, 0x00)
-INIT_REGS_DATA(ITSR+1,0x3f)
-INIT_REGS_DATA(INTCR,0x20)
-
- .word 0
-
-gpio_table:
- ;; P1DDR
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; P7DDR
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x00,0x00
- ;; PCDDR
- .byte 0x00,0x00
- ;; PDDDR
- .byte 0x00,0x00
- ;; PEDDR
- .byte 0x00,0x00
- ;; PFDDR
- .byte 0x00,0x00
- ;; PGDDR
- .byte 0x00,0x00
- ;; PHDDR
- .byte 0x00,0x00
-
- .section .rodata
-__target_name:
- .asciz "EDOSK-2674"
-
- .section .bss
-__command_line:
- .space 512
-
- /* interrupt vector */
- .section .vectors,"ax"
- .long __start
- .long __start
-vector = 2
- .rept 126
- .long _interrupt_redirect_table+vector*4
-vector = vector + 1
- .endr
diff --git a/arch/h8300/platform/h8s/generic/Makefile b/arch/h8300/platform/h8s/generic/Makefile
deleted file mode 100644
index 44b4685..0000000
--- a/arch/h8300/platform/h8s/generic/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-extra-y = crt0_$(MODEL).o
diff --git a/arch/h8300/platform/h8s/generic/crt0_ram.S b/arch/h8300/platform/h8s/generic/crt0_ram.S
deleted file mode 100644
index 7018915..0000000
--- a/arch/h8300/platform/h8s/generic/crt0_ram.S
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8s/edosk2674/crt0_ram.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: generic
- * Memory Layout : RAM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-
-#if !defined(CONFIG_BLKDEV_RESERVE)
-#if defined(CONFIG_GDB_DEBUG)
-#define RAMEND (__ramend - 0xc000)
-#else
-#define RAMEND __ramend
-#endif
-#else
-#define RAMEND CONFIG_BLKDEV_RESERVE_ADDRESS
-#endif
-
- .global __start
- .global __command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300s
-
- .section .text
- .file "crt0_ram.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #RAMEND,sp
- ldc #0x80,ccr
- ldc #0x00,exr
-
- /* Peripheral Setup */
- bclr #4,@INTCR:8 /* interrupt mode 2 */
- bset #5,@INTCR:8
-
-#if defined(CONFIG_MTD_UCLINUX)
- /* move romfs image */
- jsr @__move_romfs
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l er5,er6
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr #2,er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* copy kernel commandline */
- mov.l #COMMAND_START,er5
- mov.l #_command_line,er6
- mov.w #512,r4
- eepmov.w
-
- /* uClinux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- ;; used,ddr
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; P7DDR
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x00,0x00
- ;; PCDDR
- .byte 0x00,0x00
- ;; PDDDR
- .byte 0x00,0x00
- ;; PEDDR
- .byte 0x00,0x00
- ;; PFDDR
- .byte 0x00,0x00
- ;; PGDDR
- .byte 0x00,0x00
- ;; PHDDR
- .byte 0x00,0x00
-
-__target_name:
- .asciz "generic"
-
- .section .bootvec,"ax"
- jmp @__start
diff --git a/arch/h8300/platform/h8s/generic/crt0_rom.S b/arch/h8300/platform/h8s/generic/crt0_rom.S
deleted file mode 100644
index 623ba78..0000000
--- a/arch/h8300/platform/h8s/generic/crt0_rom.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8s/generic/crt0_rom.S
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * Platform depend startup
- * Target Archtecture: generic
- * Memory Layout : ROM
- */
-
-#define ASSEMBLY
-
-#include <asm/linkage.h>
-#include <asm/regs267x.h>
-
- .global __start
- .global __command_line
- .global __platform_gpio_table
- .global __target_name
-
- .h8300s
- .section .text
- .file "crt0_rom.S"
-
- /* CPU Reset entry */
-__start:
- mov.l #__ramend,sp
- ldc #0x80,ccr
- ldc #0,exr
- bclr #4,@INTCR:8
- bset #5,@INTCR:8 /* Interrupt mode 2 */
-
- /* Peripheral Setup */
-
- /* copy .data */
-#if !defined(CONFIG_H8S_SIM)
- mov.l #__begin_data,er5
- mov.l #__sdata,er6
- mov.l #__edata,er4
- sub.l er6,er4
- shlr.l #2,er4
-1:
- mov.l @er5+,er0
- mov.l er0,@er6
- adds #4,er6
- dec.l #1,er4
- bne 1b
-#endif
-
- /* .bss clear */
- mov.l #__sbss,er5
- mov.l #__ebss,er4
- sub.l er5,er4
- shlr.l #2,er4
- sub.l er0,er0
-1:
- mov.l er0,@er5
- adds #4,er5
- dec.l #1,er4
- bne 1b
-
- /* linux kernel start */
- ldc #0x90,ccr /* running kernel */
- mov.l #_init_thread_union,sp
- add.l #0x2000,sp
- jsr @_start_kernel
-_exit:
-
- jmp _exit
-
- rts
-
- /* I/O port assign information */
-__platform_gpio_table:
- mov.l #gpio_table,er0
- rts
-
-gpio_table:
- ;; P1DDR
- .byte 0x00,0x00
- ;; P2DDR
- .byte 0x00,0x00
- ;; P3DDR
- .byte 0x00,0x00
- ;; P4DDR
- .byte 0x00,0x00
- ;; P5DDR
- .byte 0x00,0x00
- ;; P6DDR
- .byte 0x00,0x00
- ;; dummy
- .byte 0x00,0x00
- ;; P8DDR
- .byte 0x00,0x00
- ;; PADDR
- .byte 0x00,0x00
- ;; PBDDR
- .byte 0x00,0x00
- ;; PCDDR
- .byte 0x00,0x00
- ;; PDDDR
- .byte 0x00,0x00
- ;; PEDDR
- .byte 0x00,0x00
- ;; PFDDR
- .byte 0x00,0x00
- ;; PGDDR
- .byte 0x00,0x00
- ;; PHDDR
- .byte 0x00,0x00
-
- .section .rodata
-__target_name:
- .asciz "generic"
-
- .section .bss
-__command_line:
- .space 512
-
- /* interrupt vector */
- .section .vectors,"ax"
- .long __start
- .long __start
-vector = 2
- .rept 126-1
- .long _interrupt_redirect_table+vector*4
-vector = vector + 1
- .endr
diff --git a/arch/h8300/platform/h8s/irq.c b/arch/h8300/platform/h8s/irq.c
deleted file mode 100644
index f3a5511..0000000
--- a/arch/h8300/platform/h8s/irq.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8s/ints_h8s.c
- * Interrupt handling CPU variants
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-
-#include <asm/ptrace.h>
-#include <asm/traps.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/gpio-internal.h>
-#include <asm/regs267x.h>
-
-/* saved vector list */
-const int __initconst h8300_saved_vectors[] = {
-#if defined(CONFIG_GDB_DEBUG)
- TRACE_VEC,
- TRAP3_VEC,
-#endif
- -1
-};
-
-/* trap entry table */
-const H8300_VECTOR __initconst h8300_trap_table[] = {
- 0,0,0,0,0,
- trace_break, /* TRACE */
- 0,0,
- system_call, /* TRAPA #0 */
- 0,0,0,0,0,0,0
-};
-
-/* IRQ pin assignment */
-struct irq_pins {
- unsigned char port_no;
- unsigned char bit_no;
-} __attribute__((aligned(1),packed));
-/* ISTR = 0 */
-static const struct irq_pins irq_assign_table0[16]={
- {H8300_GPIO_P5,H8300_GPIO_B0},{H8300_GPIO_P5,H8300_GPIO_B1},
- {H8300_GPIO_P5,H8300_GPIO_B2},{H8300_GPIO_P5,H8300_GPIO_B3},
- {H8300_GPIO_P5,H8300_GPIO_B4},{H8300_GPIO_P5,H8300_GPIO_B5},
- {H8300_GPIO_P5,H8300_GPIO_B6},{H8300_GPIO_P5,H8300_GPIO_B7},
- {H8300_GPIO_P6,H8300_GPIO_B0},{H8300_GPIO_P6,H8300_GPIO_B1},
- {H8300_GPIO_P6,H8300_GPIO_B2},{H8300_GPIO_P6,H8300_GPIO_B3},
- {H8300_GPIO_P6,H8300_GPIO_B4},{H8300_GPIO_P6,H8300_GPIO_B5},
- {H8300_GPIO_PF,H8300_GPIO_B1},{H8300_GPIO_PF,H8300_GPIO_B2},
-};
-/* ISTR = 1 */
-static const struct irq_pins irq_assign_table1[16]={
- {H8300_GPIO_P8,H8300_GPIO_B0},{H8300_GPIO_P8,H8300_GPIO_B1},
- {H8300_GPIO_P8,H8300_GPIO_B2},{H8300_GPIO_P8,H8300_GPIO_B3},
- {H8300_GPIO_P8,H8300_GPIO_B4},{H8300_GPIO_P8,H8300_GPIO_B5},
- {H8300_GPIO_PH,H8300_GPIO_B2},{H8300_GPIO_PH,H8300_GPIO_B3},
- {H8300_GPIO_P2,H8300_GPIO_B0},{H8300_GPIO_P2,H8300_GPIO_B1},
- {H8300_GPIO_P2,H8300_GPIO_B2},{H8300_GPIO_P2,H8300_GPIO_B3},
- {H8300_GPIO_P2,H8300_GPIO_B4},{H8300_GPIO_P2,H8300_GPIO_B5},
- {H8300_GPIO_P2,H8300_GPIO_B6},{H8300_GPIO_P2,H8300_GPIO_B7},
-};
-
-/* IRQ to GPIO pin translation */
-#define IRQ_GPIO_MAP(irqbit,irq,port,bit) \
-do { \
- if (*(volatile unsigned short *)ITSR & irqbit) { \
- port = irq_assign_table1[irq - EXT_IRQ0].port_no; \
- bit = irq_assign_table1[irq - EXT_IRQ0].bit_no; \
- } else { \
- port = irq_assign_table0[irq - EXT_IRQ0].port_no; \
- bit = irq_assign_table0[irq - EXT_IRQ0].bit_no; \
- } \
-} while(0)
-
-int h8300_enable_irq_pin(unsigned int irq)
-{
- if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) {
- unsigned short ptn = 1 << (irq - EXT_IRQ0);
- unsigned int port_no,bit_no;
- IRQ_GPIO_MAP(ptn, irq, port_no, bit_no);
- if (H8300_GPIO_RESERVE(port_no, bit_no) == 0)
- return -EBUSY; /* pin already use */
- H8300_GPIO_DDR(port_no, bit_no, H8300_GPIO_INPUT);
- *(volatile unsigned short *)ISR &= ~ptn; /* ISR clear */
- }
-
- return 0;
-}
-
-void h8300_disable_irq_pin(unsigned int irq)
-{
- if (irq >= EXT_IRQ0 && irq <= EXT_IRQ15) {
- /* disable interrupt & release IRQ pin */
- unsigned short ptn = 1 << (irq - EXT_IRQ0);
- unsigned short port_no,bit_no;
- *(volatile unsigned short *)ISR &= ~ptn;
- *(volatile unsigned short *)IER &= ~ptn;
- IRQ_GPIO_MAP(ptn, irq, port_no, bit_no);
- H8300_GPIO_FREE(port_no, bit_no);
- }
-}
diff --git a/arch/h8300/platform/h8s/ptrace_h8s.c b/arch/h8300/platform/h8s/ptrace_h8s.c
deleted file mode 100644
index c058ab1..0000000
--- a/arch/h8300/platform/h8s/ptrace_h8s.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * linux/arch/h8300/platform/h8s/ptrace_h8s.c
- * ptrace cpu depend helper functions
- *
- * Yoshinori Sato <ysato@users.sourceforge.jp>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of
- * this archive for more details.
- */
-
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-
-#define CCR_MASK 0x6f
-#define EXR_TRACE 0x80
-
-/* Mapping from PT_xxx to the stack offset at which the register is
- saved. Notice that usp has no stack-slot and needs to be treated
- specially (see get_reg/put_reg below). */
-static const int h8300_register_offset[] = {
- PT_REG(er1), PT_REG(er2), PT_REG(er3), PT_REG(er4),
- PT_REG(er5), PT_REG(er6), PT_REG(er0), PT_REG(orig_er0),
- PT_REG(ccr), PT_REG(pc), 0, PT_REG(exr)
-};
-
-/* read register */
-long h8300_get_reg(struct task_struct *task, int regno)
-{
- switch (regno) {
- case PT_USP:
- return task->thread.usp + sizeof(long)*2 + 2;
- case PT_CCR:
- case PT_EXR:
- return *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
- default:
- return *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]);
- }
-}
-
-/* write register */
-int h8300_put_reg(struct task_struct *task, int regno, unsigned long data)
-{
- unsigned short oldccr;
- switch (regno) {
- case PT_USP:
- task->thread.usp = data - sizeof(long)*2 - 2;
- case PT_CCR:
- oldccr = *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]);
- oldccr &= ~CCR_MASK;
- data &= CCR_MASK;
- data |= oldccr;
- *(unsigned short *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
- break;
- case PT_EXR:
- /* exr modify not support */
- return -EIO;
- default:
- *(unsigned long *)(task->thread.esp0 + h8300_register_offset[regno]) = data;
- break;
- }
- return 0;
-}
-
-/* disable singlestep */
-void user_disable_single_step(struct task_struct *child)
-{
- *(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) &= ~EXR_TRACE;
-}
-
-/* enable singlestep */
-void user_enable_single_step(struct task_struct *child)
-{
- *(unsigned short *)(child->thread.esp0 + h8300_register_offset[PT_EXR]) |= EXR_TRACE;
-}
-
-asmlinkage void trace_trap(unsigned long bp)
-{
- (void)bp;
- force_sig(SIGTRAP,current);
-}
-
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index d340497..50fe651 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -5,7 +5,7 @@
#include <linux/sh_dma.h>
/*
- * Generic header for SuperH (H)SCI(F) (used by sh/sh64/h8300 and related parts)
+ * Generic header for SuperH (H)SCI(F) (used by sh/sh64 and related parts)
*/
#define SCIx_NOT_SUPPORTED (-1)
diff --git a/tools/testing/ktest/examples/crosstests.conf b/tools/testing/ktest/examples/crosstests.conf
index 4673660..a1203148 100644
--- a/tools/testing/ktest/examples/crosstests.conf
+++ b/tools/testing/ktest/examples/crosstests.conf
@@ -133,12 +133,6 @@ CROSS = frv-linux
ARCH = frv
GCC_VER = 4.5.1
-# h8300 - failed make defconfig??
-TEST_START IF ${RUN} == h8300 || ${DO_FAILED}
-CROSS = h8300-elf
-ARCH = h8300
-GCC_VER = 4.5.1
-
# m68k fails with error?
TEST_START IF ${RUN} == m68k || ${DO_DEFAULT}
CROSS = m68k-linux
--
1.7.9.7
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 2/7] ide: Drop H8/300 driver
2013-08-30 16:40 [PATCH 0/7] Drop support for Renesys H8/300 architecture Guenter Roeck
2013-08-30 16:40 ` [PATCH 1/7] Drop support for Renesys H8/300 (h8300) architecture Guenter Roeck
@ 2013-08-30 16:40 ` Guenter Roeck
2013-08-30 16:40 ` [PATCH 3/7] net/ethernet: smsc: Drop conditional code for H8/300 Guenter Roeck
` (6 subsequent siblings)
8 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2013-08-30 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: linux-ide, netdev, linux-watchdog, Wim Van Sebroeck,
David S. Miller, Al Viro, Eric Paris, Greg Kroah-Hartman,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell,
Linus Torvalds, Guenter Roeck
Architecture is gone, so there is no need to keep its ide driver around.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/ide/Kconfig | 7 ---
drivers/ide/Makefile | 2 -
drivers/ide/ide-h8300.c | 109 -----------------------------------------------
3 files changed, 118 deletions(-)
delete mode 100644 drivers/ide/ide-h8300.c
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 02906ca..5dba90a 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -722,13 +722,6 @@ config BLK_DEV_IDE_RAPIDE
Say Y here if you want to support the Yellowstone RapIDE controller
manufactured for use with Acorn computers.
-config IDE_H8300
- tristate "H8300 IDE support"
- depends on H8300
- default y
- help
- Enables the H8300 IDE driver.
-
config BLK_DEV_GAYLE
tristate "Amiga Gayle IDE interface support"
depends on AMIGA
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index af8d016..a04ee82 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -78,8 +78,6 @@ obj-$(CONFIG_BLK_DEV_CMD640) += cmd640.o
obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o
-obj-$(CONFIG_IDE_H8300) += ide-h8300.o
-
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
diff --git a/drivers/ide/ide-h8300.c b/drivers/ide/ide-h8300.c
deleted file mode 100644
index 520f42c..0000000
--- a/drivers/ide/ide-h8300.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * H8/300 generic IDE interface
- */
-
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define DRV_NAME "ide-h8300"
-
-#define bswap(d) \
-({ \
- u16 r; \
- __asm__("mov.b %w1,r1h\n\t" \
- "mov.b %x1,r1l\n\t" \
- "mov.w r1,%0" \
- :"=r"(r) \
- :"r"(d) \
- :"er1"); \
- (r); \
-})
-
-static void mm_outsw(unsigned long addr, void *buf, u32 len)
-{
- unsigned short *bp = (unsigned short *)buf;
- for (; len > 0; len--, bp++)
- *(volatile u16 *)addr = bswap(*bp);
-}
-
-static void mm_insw(unsigned long addr, void *buf, u32 len)
-{
- unsigned short *bp = (unsigned short *)buf;
- for (; len > 0; len--, bp++)
- *bp = bswap(*(volatile u16 *)addr);
-}
-
-static void h8300_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- mm_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
-}
-
-static void h8300_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
- void *buf, unsigned int len)
-{
- mm_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2);
-}
-
-static const struct ide_tp_ops h8300_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = ide_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = h8300_input_data,
- .output_data = h8300_output_data,
-};
-
-#define H8300_IDE_GAP (2)
-
-static inline void hw_setup(struct ide_hw *hw)
-{
- int i;
-
- memset(hw, 0, sizeof(*hw));
- for (i = 0; i <= 7; i++)
- hw->io_ports_array[i] = CONFIG_H8300_IDE_BASE + H8300_IDE_GAP*i;
- hw->io_ports.ctl_addr = CONFIG_H8300_IDE_ALT;
- hw->irq = EXT_IRQ0 + CONFIG_H8300_IDE_IRQ;
-}
-
-static const struct ide_port_info h8300_port_info = {
- .tp_ops = &h8300_tp_ops,
- .host_flags = IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA,
- .chipset = ide_generic,
-};
-
-static int __init h8300_ide_init(void)
-{
- struct ide_hw hw, *hws[] = { &hw };
-
- printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n");
-
- if (!request_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8, "ide-h8300"))
- goto out_busy;
- if (!request_region(CONFIG_H8300_IDE_ALT, H8300_IDE_GAP, "ide-h8300")) {
- release_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8);
- goto out_busy;
- }
-
- hw_setup(&hw);
-
- return ide_host_add(&h8300_port_info, hws, 1, NULL);
-
-out_busy:
- printk(KERN_ERR "ide-h8300: IDE I/F resource already used.\n");
-
- return -EBUSY;
-}
-
-module_init(h8300_ide_init);
-
-MODULE_LICENSE("GPL");
--
1.7.9.7
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 3/7] net/ethernet: smsc: Drop conditional code for H8/300
2013-08-30 16:40 [PATCH 0/7] Drop support for Renesys H8/300 architecture Guenter Roeck
2013-08-30 16:40 ` [PATCH 1/7] Drop support for Renesys H8/300 (h8300) architecture Guenter Roeck
2013-08-30 16:40 ` [PATCH 2/7] ide: Drop H8/300 driver Guenter Roeck
@ 2013-08-30 16:40 ` Guenter Roeck
2013-08-30 16:40 ` [PATCH 4/7] net/ethernet: Drop H8/300 Ethernet driver Guenter Roeck
` (5 subsequent siblings)
8 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2013-08-30 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: linux-ide, netdev, linux-watchdog, Wim Van Sebroeck,
David S. Miller, Al Viro, Eric Paris, Greg Kroah-Hartman,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell,
Linus Torvalds, Guenter Roeck
With the H8/300 architecture gone, this code is no longer necessary.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/net/ethernet/smsc/smc9194.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c
index e85c2e7..814f59b 100644
--- a/drivers/net/ethernet/smsc/smc9194.c
+++ b/drivers/net/ethernet/smsc/smc9194.c
@@ -95,14 +95,6 @@ static const char version[] =
#define USE_32_BIT 1
#endif
-#if defined(__H8300H__) || defined(__H8300S__)
-#define NO_AUTOPROBE
-#undef insl
-#undef outsl
-#define insl(a,b,l) io_insl_noswap(a,b,l)
-#define outsl(a,b,l) io_outsl_noswap(a,b,l)
-#endif
-
/*
.the SMC9194 can be at any of the following port addresses. To change,
.for a slightly different card, you can add it to the array. Keep in
@@ -651,11 +643,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
#ifdef USE_32_BIT
if ( length & 0x2 ) {
outsl(ioaddr + DATA_1, buf, length >> 2 );
-#if !defined(__H8300H__) && !defined(__H8300S__)
outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
-#else
- ctrl_outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
-#endif
}
else
outsl(ioaddr + DATA_1, buf, length >> 2 );
--
1.7.9.7
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 4/7] net/ethernet: Drop H8/300 Ethernet driver
2013-08-30 16:40 [PATCH 0/7] Drop support for Renesys H8/300 architecture Guenter Roeck
` (2 preceding siblings ...)
2013-08-30 16:40 ` [PATCH 3/7] net/ethernet: smsc: Drop conditional code for H8/300 Guenter Roeck
@ 2013-08-30 16:40 ` Guenter Roeck
2013-08-30 16:40 ` [PATCH 5/7] watchdog: Drop references to H8300 architecture Guenter Roeck
` (4 subsequent siblings)
8 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2013-08-30 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: linux-ide, netdev, linux-watchdog, Wim Van Sebroeck,
David S. Miller, Al Viro, Eric Paris, Greg Kroah-Hartman,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell,
Linus Torvalds, Guenter Roeck
Architecture is gone, so this driver is no longer needed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/net/Space.c | 3 +-
drivers/net/ethernet/8390/Kconfig | 7 -
drivers/net/ethernet/8390/Makefile | 1 -
drivers/net/ethernet/8390/ne-h8300.c | 684 ----------------------------------
4 files changed, 1 insertion(+), 694 deletions(-)
delete mode 100644 drivers/net/ethernet/8390/ne-h8300.c
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 3a8c753..a7271e0 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -102,8 +102,7 @@ static struct devprobe2 isa_probes[] __initdata = {
#ifdef CONFIG_WD80x3
{wd_probe, 0},
#endif
-#if defined(CONFIG_NE2000) || \
- defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */
+#if defined(CONFIG_NE2000) /* ISA (use ne2k-pci for PCI cards) */
{ne_probe, 0},
#endif
#ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index a5f91e1..0988811 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -146,13 +146,6 @@ config PCMCIA_PCNET
To compile this driver as a module, choose M here: the module will be
called pcnet_cs. If unsure, say N.
-config NE_H8300
- tristate "NE2000 compatible support for H8/300"
- depends on H8300
- ---help---
- Say Y here if you want to use the NE2000 compatible
- controller on the Renesas H8/300 processor.
-
config STNIC
tristate "National DP83902AV support"
depends on SUPERH
diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile
index 588954a..ff3b318 100644
--- a/drivers/net/ethernet/8390/Makefile
+++ b/drivers/net/ethernet/8390/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_HYDRA) += hydra.o 8390.o
obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o
obj-$(CONFIG_NE2000) += ne.o 8390p.o
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
-obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
obj-$(CONFIG_PCMCIA_AXNET) += axnet_cs.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o 8390.o
obj-$(CONFIG_STNIC) += stnic.o 8390.o
diff --git a/drivers/net/ethernet/8390/ne-h8300.c b/drivers/net/ethernet/8390/ne-h8300.c
deleted file mode 100644
index 7fc28f2..0000000
--- a/drivers/net/ethernet/8390/ne-h8300.c
+++ /dev/null
@@ -1,684 +0,0 @@
-/* ne-h8300.c: A NE2000 clone on H8/300 driver for linux. */
-/*
- original ne.c
- Written 1992-94 by Donald Becker.
-
- Copyright 1993 United States Government as represented by the
- Director, National Security Agency.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- The author may be reached as becker@scyld.com, or C/O
- Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
-
- H8/300 modified
- Yoshinori Sato <ysato@users.sourceforge.jp>
-*/
-
-static const char version1[] =
-"ne-h8300.c:v1.00 2004/04/11 ysato\n";
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/jiffies.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define EI_SHIFT(x) (ei_local->reg_offset[x])
-
-#include "8390.h"
-
-#define DRV_NAME "ne-h8300"
-
-/* Some defines that people can play with if so inclined. */
-
-/* Do we perform extra sanity checks on stuff ? */
-/* #define NE_SANITY_CHECK */
-
-/* Do we implement the read before write bugfix ? */
-/* #define NE_RW_BUGFIX */
-
-/* Do we have a non std. amount of memory? (in units of 256 byte pages) */
-/* #define PACKETBUF_MEMSIZE 0x40 */
-
-/* A zero-terminated list of I/O addresses to be probed at boot. */
-
-/* ---- No user-serviceable parts below ---- */
-
-static const char version[] =
- "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-#include "lib8390.c"
-
-#define NE_BASE (dev->base_addr)
-#define NE_CMD 0x00
-#define NE_DATAPORT (ei_status.word16?0x20:0x10) /* NatSemi-defined port window offset. */
-#define NE_RESET (ei_status.word16?0x3f:0x1f) /* Issue a read to reset, a write to clear. */
-#define NE_IO_EXTENT (ei_status.word16?0x40:0x20)
-
-#define NESM_START_PG 0x40 /* First page of TX buffer */
-#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
-
-static int ne_probe1(struct net_device *dev, int ioaddr);
-
-static int ne_open(struct net_device *dev);
-static int ne_close(struct net_device *dev);
-
-static void ne_reset_8390(struct net_device *dev);
-static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page);
-static void ne_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset);
-static void ne_block_output(struct net_device *dev, const int count,
- const unsigned char *buf, const int start_page);
-
-
-static u32 reg_offset[16];
-
-static int __init init_reg_offset(struct net_device *dev,unsigned long base_addr)
-{
- struct ei_device *ei_local = netdev_priv(dev);
- int i;
- unsigned char bus_width;
-
- bus_width = *(volatile unsigned char *)ABWCR;
- bus_width &= 1 << ((base_addr >> 21) & 7);
-
- for (i = 0; i < ARRAY_SIZE(reg_offset); i++)
- if (bus_width == 0)
- reg_offset[i] = i * 2 + 1;
- else
- reg_offset[i] = i;
-
- ei_local->reg_offset = reg_offset;
- return 0;
-}
-
-static int __initdata h8300_ne_count = 0;
-#ifdef CONFIG_H8300H_H8MAX
-static unsigned long __initdata h8300_ne_base[] = { 0x800600 };
-static int h8300_ne_irq[] = {EXT_IRQ4};
-#endif
-#ifdef CONFIG_H8300H_AKI3068NET
-static unsigned long __initdata h8300_ne_base[] = { 0x200000 };
-static int h8300_ne_irq[] = {EXT_IRQ5};
-#endif
-
-static inline int init_dev(struct net_device *dev)
-{
- if (h8300_ne_count < ARRAY_SIZE(h8300_ne_base)) {
- dev->base_addr = h8300_ne_base[h8300_ne_count];
- dev->irq = h8300_ne_irq[h8300_ne_count];
- h8300_ne_count++;
- return 0;
- } else
- return -ENODEV;
-}
-
-/* Probe for various non-shared-memory ethercards.
-
- NEx000-clone boards have a Station Address PROM (SAPROM) in the packet
- buffer memory space. NE2000 clones have 0x57,0x57 in bytes 0x0e,0x0f of
- the SAPROM, while other supposed NE2000 clones must be detected by their
- SA prefix.
-
- Reading the SAPROM from a word-wide card with the 8390 set in byte-wide
- mode results in doubled values, which can be detected and compensated for.
-
- The probe is also responsible for initializing the card and filling
- in the 'dev' and 'ei_status' structures.
-
- We use the minimum memory size for some ethercard product lines, iff we can't
- distinguish models. You can increase the packet buffer size by setting
- PACKETBUF_MEMSIZE. Reported Cabletron packet buffer locations are:
- E1010 starts at 0x100 and ends at 0x2000.
- E1010-x starts at 0x100 and ends at 0x8000. ("-x" means "more memory")
- E2010 starts at 0x100 and ends at 0x4000.
- E2010-x starts at 0x100 and ends at 0xffff. */
-
-static int __init do_ne_probe(struct net_device *dev)
-{
- unsigned int base_addr = dev->base_addr;
-
- /* First check any supplied i/o locations. User knows best. <cough> */
- if (base_addr > 0x1ff) /* Check a single specified location. */
- return ne_probe1(dev, base_addr);
- else if (base_addr != 0) /* Don't probe at all. */
- return -ENXIO;
-
- return -ENODEV;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
- free_irq(dev->irq, dev);
- release_region(dev->base_addr, NE_IO_EXTENT);
-}
-
-#ifndef MODULE
-struct net_device * __init ne_probe(int unit)
-{
- struct net_device *dev = ____alloc_ei_netdev(0);
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- if (init_dev(dev))
- return ERR_PTR(-ENODEV);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = init_reg_offset(dev, dev->base_addr);
- if (err)
- goto out;
-
- err = do_ne_probe(dev);
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops ne_netdev_ops = {
- .ndo_open = ne_open,
- .ndo_stop = ne_close,
-
- .ndo_start_xmit = __ei_start_xmit,
- .ndo_tx_timeout = __ei_tx_timeout,
- .ndo_get_stats = __ei_get_stats,
- .ndo_set_rx_mode = __ei_set_multicast_list,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_change_mtu = eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = __ei_poll,
-#endif
-};
-
-static int __init ne_probe1(struct net_device *dev, int ioaddr)
-{
- int i;
- unsigned char SA_prom[16];
- int wordlength = 2;
- const char *name = NULL;
- int start_page, stop_page;
- int reg0, ret;
- static unsigned version_printed;
- struct ei_device *ei_local = netdev_priv(dev);
- unsigned char bus_width;
-
- if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME))
- return -EBUSY;
-
- reg0 = inb_p(ioaddr);
- if (reg0 == 0xFF) {
- ret = -ENODEV;
- goto err_out;
- }
-
- /* Do a preliminary verification that we have a 8390. */
- {
- int regd;
- outb_p(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
- regd = inb_p(ioaddr + EI_SHIFT(0x0d));
- outb_p(0xff, ioaddr + EI_SHIFT(0x0d));
- outb_p(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
- inb_p(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
- if (inb_p(ioaddr + EN0_COUNTER0) != 0) {
- outb_p(reg0, ioaddr + EI_SHIFT(0));
- outb_p(regd, ioaddr + EI_SHIFT(0x0d)); /* Restore the old values. */
- ret = -ENODEV;
- goto err_out;
- }
- }
-
- if (ei_debug && version_printed++ == 0)
- printk(KERN_INFO "%s", version1);
-
- printk(KERN_INFO "NE*000 ethercard probe at %08x:", ioaddr);
-
- /* Read the 16 bytes of station address PROM.
- We must first initialize registers, similar to NS8390_init(eifdev, 0).
- We can't reliably read the SAPROM address without this.
- (I learned the hard way!). */
- {
- struct {unsigned char value, offset; } program_seq[] =
- {
- {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
- {0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
- {0x00, EN0_RCNTLO}, /* Clear the count regs. */
- {0x00, EN0_RCNTHI},
- {0x00, EN0_IMR}, /* Mask completion irq. */
- {0xFF, EN0_ISR},
- {E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
- {E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
- {32, EN0_RCNTLO},
- {0x00, EN0_RCNTHI},
- {0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
- {0x00, EN0_RSARHI},
- {E8390_RREAD+E8390_START, E8390_CMD},
- };
-
- for (i = 0; i < ARRAY_SIZE(program_seq); i++)
- outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
-
- }
- bus_width = *(volatile unsigned char *)ABWCR;
- bus_width &= 1 << ((ioaddr >> 21) & 7);
- ei_status.word16 = (bus_width == 0); /* temporary setting */
- for(i = 0; i < 16 /*sizeof(SA_prom)*/; i++) {
- SA_prom[i] = inb_p(ioaddr + NE_DATAPORT);
- inb_p(ioaddr + NE_DATAPORT); /* dummy read */
- }
-
- start_page = NESM_START_PG;
- stop_page = NESM_STOP_PG;
-
- if (bus_width)
- wordlength = 1;
- else
- outb_p(0x49, ioaddr + EN0_DCFG);
-
- /* Set up the rest of the parameters. */
- name = (wordlength == 2) ? "NE2000" : "NE1000";
-
- if (! dev->irq) {
- printk(" failed to detect IRQ line.\n");
- ret = -EAGAIN;
- goto err_out;
- }
-
- /* Snarf the interrupt now. There's no point in waiting since we cannot
- share and the board will usually be enabled. */
- ret = request_irq(dev->irq, __ei_interrupt, 0, name, dev);
- if (ret) {
- printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret);
- goto err_out;
- }
-
- dev->base_addr = ioaddr;
-
- for (i = 0; i < ETH_ALEN; i++)
- dev->dev_addr[i] = SA_prom[i];
- printk(" %pM\n", dev->dev_addr);
-
- printk("%s: %s found at %#x, using IRQ %d.\n",
- dev->name, name, ioaddr, dev->irq);
-
- ei_status.name = name;
- ei_status.tx_start_page = start_page;
- ei_status.stop_page = stop_page;
- ei_status.word16 = (wordlength == 2);
-
- ei_status.rx_start_page = start_page + TX_PAGES;
-#ifdef PACKETBUF_MEMSIZE
- /* Allow the packet buffer size to be overridden by know-it-alls. */
- ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;
-#endif
-
- ei_status.reset_8390 = &ne_reset_8390;
- ei_status.block_input = &ne_block_input;
- ei_status.block_output = &ne_block_output;
- ei_status.get_8390_hdr = &ne_get_8390_hdr;
- ei_status.priv = 0;
-
- dev->netdev_ops = &ne_netdev_ops;
-
- __NS8390_init(dev, 0);
-
- ret = register_netdev(dev);
- if (ret)
- goto out_irq;
- return 0;
-out_irq:
- free_irq(dev->irq, dev);
-err_out:
- release_region(ioaddr, NE_IO_EXTENT);
- return ret;
-}
-
-static int ne_open(struct net_device *dev)
-{
- __ei_open(dev);
- return 0;
-}
-
-static int ne_close(struct net_device *dev)
-{
- if (ei_debug > 1)
- printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name);
- __ei_close(dev);
- return 0;
-}
-
-/* Hard reset the card. This used to pause for the same period that a
- 8390 reset command required, but that shouldn't be necessary. */
-
-static void ne_reset_8390(struct net_device *dev)
-{
- unsigned long reset_start_time = jiffies;
- struct ei_device *ei_local = netdev_priv(dev);
-
- if (ei_debug > 1)
- printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies);
-
- /* DON'T change these to inb_p/outb_p or reset will fail on clones. */
- outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
-
- ei_status.txing = 0;
- ei_status.dmaing = 0;
-
- /* This check _should_not_ be necessary, omit eventually. */
- while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
- if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
- printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name);
- break;
- }
- outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */
-}
-
-/* Grab the 8390 specific header. Similar to the block_input routine, but
- we don't need to be concerned with ring wrap as the header will be at
- the start of a page, so we optimize accordingly. */
-
-static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
- struct ei_device *ei_local = netdev_priv(dev);
- /* This *shouldn't* happen. If it does, it's the last thing you'll see */
-
- if (ei_status.dmaing)
- {
- printk(KERN_EMERG "%s: DMAing conflict in ne_get_8390_hdr "
- "[DMAstat:%d][irqlock:%d].\n",
- dev->name, ei_status.dmaing, ei_status.irqlock);
- return;
- }
-
- ei_status.dmaing |= 0x01;
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, NE_BASE + NE_CMD);
- outb_p(sizeof(struct e8390_pkt_hdr), NE_BASE + EN0_RCNTLO);
- outb_p(0, NE_BASE + EN0_RCNTHI);
- outb_p(0, NE_BASE + EN0_RSARLO); /* On page boundary */
- outb_p(ring_page, NE_BASE + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD);
-
- if (ei_status.word16) {
- int len;
- unsigned short *p = (unsigned short *)hdr;
- for (len = sizeof(struct e8390_pkt_hdr)>>1; len > 0; len--)
- *p++ = inw(NE_BASE + NE_DATAPORT);
- } else
- insb(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
-
- outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */
- ei_status.dmaing &= ~0x01;
-
- le16_to_cpus(&hdr->count);
-}
-
-/* Block input and output, similar to the Crynwr packet driver. If you
- are porting to a new ethercard, look at the packet driver source for hints.
- The NEx000 doesn't share the on-board packet memory -- you have to put
- the packet out through the "remote DMA" dataport using outb. */
-
-static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
-{
- struct ei_device *ei_local = netdev_priv(dev);
-#ifdef NE_SANITY_CHECK
- int xfer_count = count;
-#endif
- char *buf = skb->data;
-
- /* This *shouldn't* happen. If it does, it's the last thing you'll see */
- if (ei_status.dmaing)
- {
- printk(KERN_EMERG "%s: DMAing conflict in ne_block_input "
- "[DMAstat:%d][irqlock:%d].\n",
- dev->name, ei_status.dmaing, ei_status.irqlock);
- return;
- }
- ei_status.dmaing |= 0x01;
- outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, NE_BASE + NE_CMD);
- outb_p(count & 0xff, NE_BASE + EN0_RCNTLO);
- outb_p(count >> 8, NE_BASE + EN0_RCNTHI);
- outb_p(ring_offset & 0xff, NE_BASE + EN0_RSARLO);
- outb_p(ring_offset >> 8, NE_BASE + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD);
- if (ei_status.word16)
- {
- int len;
- unsigned short *p = (unsigned short *)buf;
- for (len = count>>1; len > 0; len--)
- *p++ = inw(NE_BASE + NE_DATAPORT);
- if (count & 0x01)
- {
- buf[count-1] = inb(NE_BASE + NE_DATAPORT);
-#ifdef NE_SANITY_CHECK
- xfer_count++;
-#endif
- }
- } else {
- insb(NE_BASE + NE_DATAPORT, buf, count);
- }
-
-#ifdef NE_SANITY_CHECK
- /* This was for the ALPHA version only, but enough people have
- been encountering problems so it is still here. If you see
- this message you either 1) have a slightly incompatible clone
- or 2) have noise/speed problems with your bus. */
-
- if (ei_debug > 1)
- {
- /* DMA termination address check... */
- int addr, tries = 20;
- do {
- /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here
- -- it's broken for Rx on some cards! */
- int high = inb_p(NE_BASE + EN0_RSARHI);
- int low = inb_p(NE_BASE + EN0_RSARLO);
- addr = (high << 8) + low;
- if (((ring_offset + xfer_count) & 0xff) == low)
- break;
- } while (--tries > 0);
- if (tries <= 0)
- printk(KERN_WARNING "%s: RX transfer address mismatch,"
- "%#4.4x (expected) vs. %#4.4x (actual).\n",
- dev->name, ring_offset + xfer_count, addr);
- }
-#endif
- outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */
- ei_status.dmaing &= ~0x01;
-}
-
-static void ne_block_output(struct net_device *dev, int count,
- const unsigned char *buf, const int start_page)
-{
- struct ei_device *ei_local = netdev_priv(dev);
- unsigned long dma_start;
-#ifdef NE_SANITY_CHECK
- int retries = 0;
-#endif
-
- /* Round the count up for word writes. Do we need to do this?
- What effect will an odd byte count have on the 8390?
- I should check someday. */
-
- if (ei_status.word16 && (count & 0x01))
- count++;
-
- /* This *shouldn't* happen. If it does, it's the last thing you'll see */
- if (ei_status.dmaing)
- {
- printk(KERN_EMERG "%s: DMAing conflict in ne_block_output."
- "[DMAstat:%d][irqlock:%d]\n",
- dev->name, ei_status.dmaing, ei_status.irqlock);
- return;
- }
- ei_status.dmaing |= 0x01;
- /* We should already be in page 0, but to be safe... */
- outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, NE_BASE + NE_CMD);
-
-#ifdef NE_SANITY_CHECK
-retry:
-#endif
-
-#ifdef NE8390_RW_BUGFIX
- /* Handle the read-before-write bug the same way as the
- Crynwr packet driver -- the NatSemi method doesn't work.
- Actually this doesn't always work either, but if you have
- problems with your NEx000 this is better than nothing! */
-
- outb_p(0x42, NE_BASE + EN0_RCNTLO);
- outb_p(0x00, NE_BASE + EN0_RCNTHI);
- outb_p(0x42, NE_BASE + EN0_RSARLO);
- outb_p(0x00, NE_BASE + EN0_RSARHI);
- outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD);
- /* Make certain that the dummy read has occurred. */
- udelay(6);
-#endif
-
- outb_p(ENISR_RDC, NE_BASE + EN0_ISR);
-
- /* Now the normal output. */
- outb_p(count & 0xff, NE_BASE + EN0_RCNTLO);
- outb_p(count >> 8, NE_BASE + EN0_RCNTHI);
- outb_p(0x00, NE_BASE + EN0_RSARLO);
- outb_p(start_page, NE_BASE + EN0_RSARHI);
-
- outb_p(E8390_RWRITE+E8390_START, NE_BASE + NE_CMD);
- if (ei_status.word16) {
- int len;
- unsigned short *p = (unsigned short *)buf;
- for (len = count>>1; len > 0; len--)
- outw(*p++, NE_BASE + NE_DATAPORT);
- } else {
- outsb(NE_BASE + NE_DATAPORT, buf, count);
- }
-
- dma_start = jiffies;
-
-#ifdef NE_SANITY_CHECK
- /* This was for the ALPHA version only, but enough people have
- been encountering problems so it is still here. */
-
- if (ei_debug > 1)
- {
- /* DMA termination address check... */
- int addr, tries = 20;
- do {
- int high = inb_p(NE_BASE + EN0_RSARHI);
- int low = inb_p(NE_BASE + EN0_RSARLO);
- addr = (high << 8) + low;
- if ((start_page << 8) + count == addr)
- break;
- } while (--tries > 0);
-
- if (tries <= 0)
- {
- printk(KERN_WARNING "%s: Tx packet transfer address mismatch,"
- "%#4.4x (expected) vs. %#4.4x (actual).\n",
- dev->name, (start_page << 8) + count, addr);
- if (retries++ == 0)
- goto retry;
- }
- }
-#endif
-
- while ((inb_p(NE_BASE + EN0_ISR) & ENISR_RDC) == 0)
- if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
- printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
- ne_reset_8390(dev);
- __NS8390_init(dev,1);
- break;
- }
-
- outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */
- ei_status.dmaing &= ~0x01;
-}
-
-
-#ifdef MODULE
-#define MAX_NE_CARDS 1 /* Max number of NE cards per module */
-static struct net_device *dev_ne[MAX_NE_CARDS];
-static int io[MAX_NE_CARDS];
-static int irq[MAX_NE_CARDS];
-static int bad[MAX_NE_CARDS]; /* 0xbad = bad sig or no reset ack */
-
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(bad, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O base address(es)");
-MODULE_PARM_DESC(irq, "IRQ number(s)");
-MODULE_DESCRIPTION("H8/300 NE2000 Ethernet driver");
-MODULE_LICENSE("GPL");
-
-/* This is set up so that no ISA autoprobe takes place. We can't guarantee
-that the ne2k probe is the last 8390 based probe to take place (as it
-is at boot) and so the probe will get confused by any other 8390 cards.
-ISA device autoprobes on a running machine are not recommended anyway. */
-
-int init_module(void)
-{
- int this_dev, found = 0;
- int err;
-
- for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
- struct net_device *dev = ____alloc_ei_netdev(0);
- if (!dev)
- break;
- if (io[this_dev]) {
- dev->irq = irq[this_dev];
- dev->mem_end = bad[this_dev];
- dev->base_addr = io[this_dev];
- } else {
- dev->base_addr = h8300_ne_base[this_dev];
- dev->irq = h8300_ne_irq[this_dev];
- }
- err = init_reg_offset(dev, dev->base_addr);
- if (!err) {
- if (do_ne_probe(dev) == 0) {
- dev_ne[found++] = dev;
- continue;
- }
- }
- free_netdev(dev);
- if (found)
- break;
- if (io[this_dev] != 0)
- printk(KERN_WARNING "ne.c: No NE*000 card found at i/o = %#x\n", dev->base_addr);
- else
- printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\" value(s) for ISA cards.\n");
- return -ENXIO;
- }
- if (found)
- return 0;
- return -ENODEV;
-}
-
-void cleanup_module(void)
-{
- int this_dev;
-
- for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
- struct net_device *dev = dev_ne[this_dev];
- if (dev) {
- unregister_netdev(dev);
- cleanup_card(dev);
- free_netdev(dev);
- }
- }
-}
-#endif /* MODULE */
--
1.7.9.7
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 5/7] watchdog: Drop references to H8300 architecture
2013-08-30 16:40 [PATCH 0/7] Drop support for Renesys H8/300 architecture Guenter Roeck
` (3 preceding siblings ...)
2013-08-30 16:40 ` [PATCH 4/7] net/ethernet: Drop H8/300 Ethernet driver Guenter Roeck
@ 2013-08-30 16:40 ` Guenter Roeck
2013-08-30 16:40 ` [PATCH 6/7] Drop MAINTAINERS entry for H8/300 Guenter Roeck
` (3 subsequent siblings)
8 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2013-08-30 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: linux-ide, netdev, linux-watchdog, Wim Van Sebroeck,
David S. Miller, Al Viro, Eric Paris, Greg Kroah-Hartman,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell,
Linus Torvalds, Guenter Roeck
Architecture is gone.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/watchdog/Kconfig | 2 --
drivers/watchdog/Makefile | 2 --
2 files changed, 4 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 362085d..08a8a4d 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -408,8 +408,6 @@ config BFIN_WDT
# FRV Architecture
-# H8300 Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
config ACQUIRE_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 2f26a0b..3989d3e 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -65,8 +65,6 @@ obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
# FRV Architecture
-# H8300 Architecture
-
# X86 (i386 + ia64 + x86_64) Architecture
obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
--
1.7.9.7
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 6/7] Drop MAINTAINERS entry for H8/300
2013-08-30 16:40 [PATCH 0/7] Drop support for Renesys H8/300 architecture Guenter Roeck
` (4 preceding siblings ...)
2013-08-30 16:40 ` [PATCH 5/7] watchdog: Drop references to H8300 architecture Guenter Roeck
@ 2013-08-30 16:40 ` Guenter Roeck
2013-08-30 16:40 ` [PATCH 7/7] Drop remaining references to H8/300 architecture Guenter Roeck
` (2 subsequent siblings)
8 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2013-08-30 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: linux-ide, netdev, linux-watchdog, Wim Van Sebroeck,
David S. Miller, Al Viro, Eric Paris, Greg Kroah-Hartman,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell,
Linus Torvalds, Guenter Roeck
The architecture is gone.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
MAINTAINERS | 8 --------
1 file changed, 8 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 8197fbd..62e513e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8482,14 +8482,6 @@ S: Maintained
F: arch/m68k/*/*_no.*
F: arch/m68k/include/asm/*_no.*
-UCLINUX FOR RENESAS H8/300 (H8300)
-M: Yoshinori Sato <ysato@users.sourceforge.jp>
-W: http://uclinux-h8.sourceforge.jp/
-S: Supported
-F: arch/h8300/
-F: drivers/ide/ide-h8300.c
-F: drivers/net/ethernet/8390/ne-h8300.c
-
UDF FILESYSTEM
M: Jan Kara <jack@suse.cz>
S: Maintained
--
1.7.9.7
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH 7/7] Drop remaining references to H8/300 architecture
2013-08-30 16:40 [PATCH 0/7] Drop support for Renesys H8/300 architecture Guenter Roeck
` (5 preceding siblings ...)
2013-08-30 16:40 ` [PATCH 6/7] Drop MAINTAINERS entry for H8/300 Guenter Roeck
@ 2013-08-30 16:40 ` Guenter Roeck
2013-08-30 16:55 ` [PATCH 0/7] Drop support for Renesys " Greg Kroah-Hartman
2013-08-30 18:46 ` Wim Van Sebroeck
8 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2013-08-30 16:40 UTC (permalink / raw)
To: linux-kernel
Cc: linux-ide, netdev, linux-watchdog, Wim Van Sebroeck,
David S. Miller, Al Viro, Eric Paris, Greg Kroah-Hartman,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell,
Linus Torvalds, Guenter Roeck
With the architecture gone, any references to it are no longer needed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
include/uapi/linux/audit.h | 1 -
include/uapi/linux/elf-em.h | 1 -
2 files changed, 2 deletions(-)
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 75cef3f..db0b825 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -329,7 +329,6 @@ enum {
#define AUDIT_ARCH_ARMEB (EM_ARM)
#define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_FRV (EM_FRV)
-#define AUDIT_ARCH_H8300 (EM_H8_300)
#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
#define AUDIT_ARCH_M32R (EM_M32R)
diff --git a/include/uapi/linux/elf-em.h b/include/uapi/linux/elf-em.h
index 8e2b7ba..dcca7ed 100644
--- a/include/uapi/linux/elf-em.h
+++ b/include/uapi/linux/elf-em.h
@@ -30,7 +30,6 @@
#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */
#define EM_V850 87 /* NEC v850 */
#define EM_M32R 88 /* Renesas M32R */
-#define EM_H8_300 46 /* Renesas H8/300,300H,H8S */
#define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */
#define EM_BLACKFIN 106 /* ADI Blackfin Processor */
#define EM_TI_C6000 140 /* TI C6X DSPs */
--
1.7.9.7
^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [PATCH 0/7] Drop support for Renesys H8/300 architecture
2013-08-30 16:40 [PATCH 0/7] Drop support for Renesys H8/300 architecture Guenter Roeck
` (6 preceding siblings ...)
2013-08-30 16:40 ` [PATCH 7/7] Drop remaining references to H8/300 architecture Guenter Roeck
@ 2013-08-30 16:55 ` Greg Kroah-Hartman
2013-08-30 18:30 ` David Miller
2013-08-30 18:46 ` Wim Van Sebroeck
8 siblings, 1 reply; 18+ messages in thread
From: Greg Kroah-Hartman @ 2013-08-30 16:55 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-kernel, linux-ide, netdev, linux-watchdog,
Wim Van Sebroeck, David S. Miller, Al Viro, Eric Paris,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell,
Linus Torvalds
On Fri, Aug 30, 2013 at 09:40:35AM -0700, Guenter Roeck wrote:
> H8/300 has been dead for several years, the kernel for it has
> not compiled for ages, and recent versions of gcc for it are broken.
> It is time to drop support for it.
>
> Yes, I understand it is not that simple to drop an architecture,
> and it may need some discussion, but someone has to put a stake
> into the ground. Keeping a virtually dead architecture on life support
> takes resources which are better spent elsewhere.
If this doesn't build, and no one is using it anymore, I agree, it
should be removed. If someone wants to revive it, 'git revert' works
just fine.
You can put my:
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
on these patches, unless someone steps up to be the active maintainer of
the arch and gets it building/working again.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 0/7] Drop support for Renesys H8/300 architecture
2013-08-30 16:55 ` [PATCH 0/7] Drop support for Renesys " Greg Kroah-Hartman
@ 2013-08-30 18:30 ` David Miller
0 siblings, 0 replies; 18+ messages in thread
From: David Miller @ 2013-08-30 18:30 UTC (permalink / raw)
To: gregkh
Cc: linux, linux-kernel, linux-ide, netdev, linux-watchdog, wim,
viro, eparis, jiang.liu, dhowells, tglx, sfr, torvalds
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Fri, 30 Aug 2013 09:55:50 -0700
> On Fri, Aug 30, 2013 at 09:40:35AM -0700, Guenter Roeck wrote:
>> H8/300 has been dead for several years, the kernel for it has
>> not compiled for ages, and recent versions of gcc for it are broken.
>> It is time to drop support for it.
>>
>> Yes, I understand it is not that simple to drop an architecture,
>> and it may need some discussion, but someone has to put a stake
>> into the ground. Keeping a virtually dead architecture on life support
>> takes resources which are better spent elsewhere.
>
> If this doesn't build, and no one is using it anymore, I agree, it
> should be removed. If someone wants to revive it, 'git revert' works
> just fine.
>
> You can put my:
>
> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> on these patches, unless someone steps up to be the active maintainer of
> the arch and gets it building/working again.
I completely agree with Greg, and for the IDE and networking bits:
Acked-by: David S. Miller <davem@davemloft.net>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 0/7] Drop support for Renesys H8/300 architecture
2013-08-30 16:40 [PATCH 0/7] Drop support for Renesys H8/300 architecture Guenter Roeck
` (7 preceding siblings ...)
2013-08-30 16:55 ` [PATCH 0/7] Drop support for Renesys " Greg Kroah-Hartman
@ 2013-08-30 18:46 ` Wim Van Sebroeck
2013-08-30 19:11 ` Guenter Roeck
8 siblings, 1 reply; 18+ messages in thread
From: Wim Van Sebroeck @ 2013-08-30 18:46 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-kernel, linux-ide, netdev, linux-watchdog, David S. Miller,
Al Viro, Eric Paris, Greg Kroah-Hartman, Jiang Liu,
David Howells, Thomas Gleixner, Stephen Rothwell, Linus Torvalds
Hi Guenter,
> H8/300 has been dead for several years, the kernel for it has
> not compiled for ages, and recent versions of gcc for it are broken.
> It is time to drop support for it.
>
> Yes, I understand it is not that simple to drop an architecture,
> and it may need some discussion, but someone has to put a stake
> into the ground. Keeping a virtually dead architecture on life support
> takes resources which are better spent elsewhere.
Agree. You may add my Acked-by.
How do you plan to get this upstream? Do I need to take the watchdog in my tree or do you plan to keep the set of patches together in one tree?
Kind regards,
Wim.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 0/7] Drop support for Renesys H8/300 architecture
2013-08-30 18:46 ` Wim Van Sebroeck
@ 2013-08-30 19:11 ` Guenter Roeck
2013-08-30 19:14 ` Linus Torvalds
0 siblings, 1 reply; 18+ messages in thread
From: Guenter Roeck @ 2013-08-30 19:11 UTC (permalink / raw)
To: Wim Van Sebroeck
Cc: linux-kernel, linux-ide, netdev, linux-watchdog, David S. Miller,
Al Viro, Eric Paris, Greg Kroah-Hartman, Jiang Liu,
David Howells, Thomas Gleixner, Stephen Rothwell, Linus Torvalds
On Fri, Aug 30, 2013 at 08:46:11PM +0200, Wim Van Sebroeck wrote:
> Hi Guenter,
>
> > H8/300 has been dead for several years, the kernel for it has
> > not compiled for ages, and recent versions of gcc for it are broken.
> > It is time to drop support for it.
> >
> > Yes, I understand it is not that simple to drop an architecture,
> > and it may need some discussion, but someone has to put a stake
> > into the ground. Keeping a virtually dead architecture on life support
> > takes resources which are better spent elsewhere.
>
> Agree. You may add my Acked-by.
> How do you plan to get this upstream? Do I need to take the watchdog in my tree or do you plan to keep the set of patches together in one tree?
>
My plan is create a branch on my repository on kernel.org, ask Stephen
to add it to linux-next, and then ask Linus to pull it after one
release cycle (ie for 3.13). This should give people enough time
to find out about it and complain, and give everyone else enough time
to find any missing pieces.
I would not mind if Linus would agree to pull it right away for 3.12,
but that seems to be a bit on the fast side.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 0/7] Drop support for Renesys H8/300 architecture
2013-08-30 19:11 ` Guenter Roeck
@ 2013-08-30 19:14 ` Linus Torvalds
2013-08-30 19:37 ` Guenter Roeck
0 siblings, 1 reply; 18+ messages in thread
From: Linus Torvalds @ 2013-08-30 19:14 UTC (permalink / raw)
To: Guenter Roeck
Cc: Wim Van Sebroeck, Linux Kernel Mailing List, IDE-ML,
Network Development, Linux Watchdog Mailing List,
David S. Miller, Al Viro, Eric Paris, Greg Kroah-Hartman,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell
On Fri, Aug 30, 2013 at 12:11 PM, Guenter Roeck <linux@roeck-us.net> wrote:
>
> I would not mind if Linus would agree to pull it right away for 3.12,
> but that seems to be a bit on the fast side.
I'm ok with code deletion patches, I don't think that would be a
problem. I didn't check them, but I assume this is all literally just
removing code that is conditional on h8/300 config options?
Linus
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 0/7] Drop support for Renesys H8/300 architecture
2013-08-30 19:14 ` Linus Torvalds
@ 2013-08-30 19:37 ` Guenter Roeck
2013-08-31 6:44 ` Geert Uytterhoeven
0 siblings, 1 reply; 18+ messages in thread
From: Guenter Roeck @ 2013-08-30 19:37 UTC (permalink / raw)
To: Linus Torvalds
Cc: Wim Van Sebroeck, Linux Kernel Mailing List, IDE-ML,
Network Development, Linux Watchdog Mailing List,
David S. Miller, Al Viro, Eric Paris, Greg Kroah-Hartman,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell
On Fri, Aug 30, 2013 at 12:14:20PM -0700, Linus Torvalds wrote:
> On Fri, Aug 30, 2013 at 12:11 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> >
> > I would not mind if Linus would agree to pull it right away for 3.12,
> > but that seems to be a bit on the fast side.
>
> I'm ok with code deletion patches, I don't think that would be a
> problem. I didn't check them, but I assume this is all literally just
> removing code that is conditional on h8/300 config options?
>
Yes.
I found a couple more since I sent the series, but nothing significant.
What is your preference - keep it until 3.13, or prepare it now and send you
a pull request for 3.12 ?
Thanks,
Guenter
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/7] Drop support for Renesys H8/300 (h8300) architecture
2013-08-30 16:40 ` [PATCH 1/7] Drop support for Renesys H8/300 (h8300) architecture Guenter Roeck
@ 2013-08-30 23:01 ` Sergei Shtylyov
2013-08-30 23:47 ` Guenter Roeck
0 siblings, 1 reply; 18+ messages in thread
From: Sergei Shtylyov @ 2013-08-30 23:01 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-kernel, linux-ide, netdev, linux-watchdog,
Wim Van Sebroeck, David S. Miller, Al Viro, Eric Paris,
Greg Kroah-Hartman, Jiang Liu, David Howells, Thomas Gleixner,
Stephen Rothwell, Linus Torvalds
Hello.
On 08/30/2013 08:40 PM, Guenter Roeck wrote:
Subject typo: it's Renesas, not Renesys, according to the MAINTAINERS entry.
> H8/300 has been dead for several years, and the kernel for it
> has not compiled for ages. Drop support for it.
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
WBR, Sergei
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/7] Drop support for Renesys H8/300 (h8300) architecture
2013-08-30 23:01 ` Sergei Shtylyov
@ 2013-08-30 23:47 ` Guenter Roeck
0 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2013-08-30 23:47 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: linux-kernel, linux-ide, netdev, linux-watchdog,
Wim Van Sebroeck, David S. Miller, Al Viro, Eric Paris,
Greg Kroah-Hartman, Jiang Liu, David Howells, Thomas Gleixner,
Stephen Rothwell, Linus Torvalds
On 08/30/2013 04:01 PM, Sergei Shtylyov wrote:
> Hello.
>
> On 08/30/2013 08:40 PM, Guenter Roeck wrote:
>
> Subject typo: it's Renesas, not Renesys, according to the MAINTAINERS entry.
>
Yes, I noticed. Will be fixed in the next version.
Guenter
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 0/7] Drop support for Renesys H8/300 architecture
2013-08-30 19:37 ` Guenter Roeck
@ 2013-08-31 6:44 ` Geert Uytterhoeven
2013-08-31 13:56 ` Guenter Roeck
0 siblings, 1 reply; 18+ messages in thread
From: Geert Uytterhoeven @ 2013-08-31 6:44 UTC (permalink / raw)
To: Guenter Roeck, Yoshinori Sato
Cc: Linus Torvalds, Wim Van Sebroeck, Linux Kernel Mailing List,
IDE-ML, Network Development, Linux Watchdog Mailing List,
David S. Miller, Al Viro, Eric Paris, Greg Kroah-Hartman,
Jiang Liu, David Howells, Thomas Gleixner, Stephen Rothwell
On Fri, Aug 30, 2013 at 9:37 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Fri, Aug 30, 2013 at 12:14:20PM -0700, Linus Torvalds wrote:
>> On Fri, Aug 30, 2013 at 12:11 PM, Guenter Roeck <linux@roeck-us.net> wrote:
>> >
>> > I would not mind if Linus would agree to pull it right away for 3.12,
>> > but that seems to be a bit on the fast side.
>>
>> I'm ok with code deletion patches, I don't think that would be a
>> problem. I didn't check them, but I assume this is all literally just
>> removing code that is conditional on h8/300 config options?
>>
> Yes.
>
> I found a couple more since I sent the series, but nothing significant.
>
> What is your preference - keep it until 3.13, or prepare it now and send you
> a pull request for 3.12 ?
It would be nice to check with Sato-san, who wanted to attend Kernel
Summit as a hobbyist architecture maintainer, and see what are his plans
and opinions.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 0/7] Drop support for Renesys H8/300 architecture
2013-08-31 6:44 ` Geert Uytterhoeven
@ 2013-08-31 13:56 ` Guenter Roeck
0 siblings, 0 replies; 18+ messages in thread
From: Guenter Roeck @ 2013-08-31 13:56 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Yoshinori Sato, Linus Torvalds, Wim Van Sebroeck,
Linux Kernel Mailing List, IDE-ML, Network Development,
Linux Watchdog Mailing List, David S. Miller, Al Viro,
Eric Paris, Greg Kroah-Hartman, Jiang Liu, David Howells,
Thomas Gleixner, Stephen Rothwell
On 08/30/2013 11:44 PM, Geert Uytterhoeven wrote:
> On Fri, Aug 30, 2013 at 9:37 PM, Guenter Roeck <linux@roeck-us.net> wrote:
>> On Fri, Aug 30, 2013 at 12:14:20PM -0700, Linus Torvalds wrote:
>>> On Fri, Aug 30, 2013 at 12:11 PM, Guenter Roeck <linux@roeck-us.net> wrote:
>>>>
>>>> I would not mind if Linus would agree to pull it right away for 3.12,
>>>> but that seems to be a bit on the fast side.
>>>
>>> I'm ok with code deletion patches, I don't think that would be a
>>> problem. I didn't check them, but I assume this is all literally just
>>> removing code that is conditional on h8/300 config options?
>>>
>> Yes.
>>
>> I found a couple more since I sent the series, but nothing significant.
>>
>> What is your preference - keep it until 3.13, or prepare it now and send you
>> a pull request for 3.12 ?
>
> It would be nice to check with Sato-san, who wanted to attend Kernel
> Summit as a hobbyist architecture maintainer, and see what are his plans
> and opinions.
>
Yes, of course. My bad that my send script dropped him of all people from the
original e-mail :(. I fixed that in version 2.
Guenter
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2013-08-31 13:56 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-30 16:40 [PATCH 0/7] Drop support for Renesys H8/300 architecture Guenter Roeck
2013-08-30 16:40 ` [PATCH 1/7] Drop support for Renesys H8/300 (h8300) architecture Guenter Roeck
2013-08-30 23:01 ` Sergei Shtylyov
2013-08-30 23:47 ` Guenter Roeck
2013-08-30 16:40 ` [PATCH 2/7] ide: Drop H8/300 driver Guenter Roeck
2013-08-30 16:40 ` [PATCH 3/7] net/ethernet: smsc: Drop conditional code for H8/300 Guenter Roeck
2013-08-30 16:40 ` [PATCH 4/7] net/ethernet: Drop H8/300 Ethernet driver Guenter Roeck
2013-08-30 16:40 ` [PATCH 5/7] watchdog: Drop references to H8300 architecture Guenter Roeck
2013-08-30 16:40 ` [PATCH 6/7] Drop MAINTAINERS entry for H8/300 Guenter Roeck
2013-08-30 16:40 ` [PATCH 7/7] Drop remaining references to H8/300 architecture Guenter Roeck
2013-08-30 16:55 ` [PATCH 0/7] Drop support for Renesys " Greg Kroah-Hartman
2013-08-30 18:30 ` David Miller
2013-08-30 18:46 ` Wim Van Sebroeck
2013-08-30 19:11 ` Guenter Roeck
2013-08-30 19:14 ` Linus Torvalds
2013-08-30 19:37 ` Guenter Roeck
2013-08-31 6:44 ` Geert Uytterhoeven
2013-08-31 13:56 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).