From: Thomas Graf <tgraf@suug.ch>
To: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>,
Sasha Levin <sasha.levin@oracle.com>,
paulmck@linux.vnet.ibm.com,
Nikolay Aleksandrov <nikolay@redhat.com>,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Ursula Braun <braunu@de.ibm.com>
Subject: [PATCH] netlink: Re-add locking to netlink_lookup() and seq walker
Date: Mon, 20 Oct 2014 20:53:55 +0100 [thread overview]
Message-ID: <20141020195355.GA2299@casper.infradead.org> (raw)
In-Reply-To: <20141020082107.GB4268@osiris>
Heiko,
Can you test the following patch:
The synchronize_rcu() in netlink_release() introduces unacceptable
latency. Reintroduce minimal lookup so we can drop the
synchronize_rcu() until socket destruction has been RCUfied.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
---
net/netlink/af_netlink.c | 37 +++++++++++++++++++++++++------------
1 file changed, 25 insertions(+), 12 deletions(-)
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 7a186e7..f1de72d 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -96,6 +96,14 @@ static DECLARE_WAIT_QUEUE_HEAD(nl_table_wait);
static int netlink_dump(struct sock *sk);
static void netlink_skb_destructor(struct sk_buff *skb);
+/* nl_table locking explained:
+ * Lookup and traversal are protected with nl_sk_hash_lock or nl_table_lock
+ * combined with an RCU read-side lock. Insertion and removal are protected
+ * with nl_sk_hash_lock while using RCU list modification primitives and may
+ * run in parallel to nl_table_lock protected lookups. Destruction of the
+ * Netlink socket may only occur *after* nl_table_lock has been acquired
+ * either during or after the socket has been removed from the list.
+ */
DEFINE_RWLOCK(nl_table_lock);
EXPORT_SYMBOL_GPL(nl_table_lock);
static atomic_t nl_table_users = ATOMIC_INIT(0);
@@ -109,10 +117,10 @@ EXPORT_SYMBOL_GPL(nl_sk_hash_lock);
static int lockdep_nl_sk_hash_is_held(void)
{
#ifdef CONFIG_LOCKDEP
- return (debug_locks) ? lockdep_is_held(&nl_sk_hash_lock) : 1;
-#else
- return 1;
+ if (debug_locks)
+ return lockdep_is_held(&nl_sk_hash_lock) || lockdep_is_held(&nl_table_lock);
#endif
+ return 1;
}
static ATOMIC_NOTIFIER_HEAD(netlink_chain);
@@ -1028,11 +1036,13 @@ static struct sock *netlink_lookup(struct net *net, int protocol, u32 portid)
struct netlink_table *table = &nl_table[protocol];
struct sock *sk;
+ read_lock(&nl_table_lock);
rcu_read_lock();
sk = __netlink_lookup(table, portid, net);
if (sk)
sock_hold(sk);
rcu_read_unlock();
+ read_unlock(&nl_table_lock);
return sk;
}
@@ -1257,9 +1267,6 @@ static int netlink_release(struct socket *sock)
}
netlink_table_ungrab();
- /* Wait for readers to complete */
- synchronize_net();
-
kfree(nlk->groups);
nlk->groups = NULL;
@@ -1281,6 +1288,7 @@ static int netlink_autobind(struct socket *sock)
retry:
cond_resched();
+ netlink_table_grab();
rcu_read_lock();
if (__netlink_lookup(table, portid, net)) {
/* Bind collision, search negative portid values. */
@@ -1288,9 +1296,11 @@ retry:
if (rover > -4097)
rover = -4097;
rcu_read_unlock();
+ netlink_table_ungrab();
goto retry;
}
rcu_read_unlock();
+ netlink_table_ungrab();
err = netlink_insert(sk, net, portid);
if (err == -EADDRINUSE)
@@ -2921,14 +2931,16 @@ static struct sock *netlink_seq_socket_idx(struct seq_file *seq, loff_t pos)
}
static void *netlink_seq_start(struct seq_file *seq, loff_t *pos)
- __acquires(RCU)
+ __acquires(nl_table_lock) __acquires(RCU)
{
+ read_lock(&nl_table_lock);
rcu_read_lock();
return *pos ? netlink_seq_socket_idx(seq, *pos - 1) : SEQ_START_TOKEN;
}
static void *netlink_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
+ struct rhashtable *ht;
struct netlink_sock *nlk;
struct nl_seq_iter *iter;
struct net *net;
@@ -2943,19 +2955,19 @@ static void *netlink_seq_next(struct seq_file *seq, void *v, loff_t *pos)
iter = seq->private;
nlk = v;
- rht_for_each_entry_rcu(nlk, nlk->node.next, node)
+ i = iter->link;
+ ht = &nl_table[i].hash;
+ rht_for_each_entry(nlk, nlk->node.next, ht, node)
if (net_eq(sock_net((struct sock *)nlk), net))
return nlk;
- i = iter->link;
j = iter->hash_idx + 1;
do {
- struct rhashtable *ht = &nl_table[i].hash;
const struct bucket_table *tbl = rht_dereference_rcu(ht->tbl, ht);
for (; j < tbl->size; j++) {
- rht_for_each_entry_rcu(nlk, tbl->buckets[j], node) {
+ rht_for_each_entry(nlk, tbl->buckets[j], ht, node) {
if (net_eq(sock_net((struct sock *)nlk), net)) {
iter->link = i;
iter->hash_idx = j;
@@ -2971,9 +2983,10 @@ static void *netlink_seq_next(struct seq_file *seq, void *v, loff_t *pos)
}
static void netlink_seq_stop(struct seq_file *seq, void *v)
- __releases(RCU)
+ __releases(RCU) __releases(nl_table_lock)
{
rcu_read_unlock();
+ read_unlock(&nl_table_lock);
}
--
1.9.3
next prev parent reply other threads:[~2014-10-20 19:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-11 8:36 [bisected] e341694e3eb5 netlink_lookup() rcu conversion causes latencies Heiko Carstens
2014-10-11 19:32 ` Eric Dumazet
2014-10-11 22:25 ` Thomas Graf
2014-10-11 23:08 ` David Miller
2014-10-20 8:21 ` Heiko Carstens
2014-10-20 19:53 ` Thomas Graf [this message]
2014-10-21 7:04 ` [PATCH] netlink: Re-add locking to netlink_lookup() and seq walker Heiko Carstens
2014-10-21 20:05 Thomas Graf
2014-10-22 1:36 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141020195355.GA2299@casper.infradead.org \
--to=tgraf@suug.ch \
--cc=braunu@de.ibm.com \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nikolay@redhat.com \
--cc=paulmck@linux.vnet.ibm.com \
--cc=sasha.levin@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).