* [PATCH] net: phy: Pass mdix ethtool setting through to phy driver
@ 2015-07-10 1:56 David Thomson
2015-07-10 2:33 ` Florian Fainelli
2015-07-11 6:17 ` David Miller
0 siblings, 2 replies; 3+ messages in thread
From: David Thomson @ 2015-07-10 1:56 UTC (permalink / raw)
To: f.fainelli; +Cc: netdev, David Thomson
Pass the mdix setting from ethtool down to the phy driver, to allow
driver specific implementations of manually setting the polarity.
Signed-off-by: David Thomson <david.thomson@alliedtelesis.co.nz>
---
drivers/net/phy/phy.c | 2 ++
include/linux/phy.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index b2197b5..47693a9 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -353,6 +353,8 @@ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
phydev->duplex = cmd->duplex;
+ phydev->mdix = cmd->eth_tp_mdix_ctrl;
+
/* Restart the PHY */
phy_start_aneg(phydev);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index a26c3f8..e5fb1d4 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -424,6 +424,8 @@ struct phy_device {
struct net_device *attached_dev;
+ u8 mdix;
+
void (*adjust_link)(struct net_device *dev);
};
#define to_phy_device(d) container_of(d, struct phy_device, dev)
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] net: phy: Pass mdix ethtool setting through to phy driver
2015-07-10 1:56 [PATCH] net: phy: Pass mdix ethtool setting through to phy driver David Thomson
@ 2015-07-10 2:33 ` Florian Fainelli
2015-07-11 6:17 ` David Miller
1 sibling, 0 replies; 3+ messages in thread
From: Florian Fainelli @ 2015-07-10 2:33 UTC (permalink / raw)
To: David Thomson; +Cc: netdev
Le 07/09/15 18:56, David Thomson a écrit :
> Pass the mdix setting from ethtool down to the phy driver, to allow
> driver specific implementations of manually setting the polarity.
>
> Signed-off-by: David Thomson <david.thomson@alliedtelesis.co.nz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Looking forwarding to see an user of this!
> ---
> drivers/net/phy/phy.c | 2 ++
> include/linux/phy.h | 2 ++
> 2 files changed, 4 insertions(+)
>
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index b2197b5..47693a9 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -353,6 +353,8 @@ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
>
> phydev->duplex = cmd->duplex;
>
> + phydev->mdix = cmd->eth_tp_mdix_ctrl;
> +
> /* Restart the PHY */
> phy_start_aneg(phydev);
>
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index a26c3f8..e5fb1d4 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -424,6 +424,8 @@ struct phy_device {
>
> struct net_device *attached_dev;
>
> + u8 mdix;
> +
> void (*adjust_link)(struct net_device *dev);
> };
> #define to_phy_device(d) container_of(d, struct phy_device, dev)
>
--
Florian
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] net: phy: Pass mdix ethtool setting through to phy driver
2015-07-10 1:56 [PATCH] net: phy: Pass mdix ethtool setting through to phy driver David Thomson
2015-07-10 2:33 ` Florian Fainelli
@ 2015-07-11 6:17 ` David Miller
1 sibling, 0 replies; 3+ messages in thread
From: David Miller @ 2015-07-11 6:17 UTC (permalink / raw)
To: david.thomson; +Cc: f.fainelli, netdev
From: David Thomson <david.thomson@alliedtelesis.co.nz>
Date: Fri, 10 Jul 2015 13:56:54 +1200
> Pass the mdix setting from ethtool down to the phy driver, to allow
> driver specific implementations of manually setting the polarity.
>
> Signed-off-by: David Thomson <david.thomson@alliedtelesis.co.nz>
Applied to net-next.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-07-11 6:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-10 1:56 [PATCH] net: phy: Pass mdix ethtool setting through to phy driver David Thomson
2015-07-10 2:33 ` Florian Fainelli
2015-07-11 6:17 ` David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).