* [PATCH net-next 0/6] bnx2x: update FW, rebrand and more
@ 2015-07-22 6:16 Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 1/6] bnx2x: Utilize FW 7.12.30 Yuval Mintz
` (6 more replies)
0 siblings, 7 replies; 8+ messages in thread
From: Yuval Mintz @ 2015-07-22 6:16 UTC (permalink / raw)
To: davem, netdev; +Cc: Ariel.Elior, Yuval Mintz
This patch series does several things - it updates the bnx2x FW into
7.12.30 which both contains some small fixes as well as opening the door
for several new features for the device - mainly vxlan/geneve offloads
and vlan filtering offload.
It then adds a new Multi-function mode [BD] which requires this FW in
order to operate.
In addition, this finally rebrands the driver from a 'broadcom' driver
into a 'qlogic' driver [although it would still reside under Broadcom's
tree in the kernel].
Dave,
Please consider applying this series to `net-next'.
[Do notice some of these don't pass checkpatch cleanly, usually due
to confirming with already existing 'bad' styles.
E.g., preprocessor `#define' which is shifted]
Thanks,
Yuval
--
1.8.3.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH net-next 1/6] bnx2x: Utilize FW 7.12.30
2015-07-22 6:16 [PATCH net-next 0/6] bnx2x: update FW, rebrand and more Yuval Mintz
@ 2015-07-22 6:16 ` Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 2/6] bnx2x: Rebrand from 'broadcom' into 'qlogic' Yuval Mintz
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Yuval Mintz @ 2015-07-22 6:16 UTC (permalink / raw)
To: davem, netdev; +Cc: Ariel.Elior, Yuval Mintz
This moves bnx2x into using 7.12.30 FW. Said firmware fixes the following:
- Packets from a VF with pvid configured which were sent with a
different vlan were transmitted instead of being discarded.
- FCoE traffic might not recover after a failue while there's traffic
to another function.
In addition, this FW opens the door for the driver to implement several
new features; Specifically, this enhances the device's support for
encapsulated packets and will allow vxlan/geneve offloads to be added in
the future, as well as vlan filtering offload.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 11 ++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 2 +
.../net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 87 +++++++++++++---------
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 +
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 53 +++++++++----
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h | 45 +++++++----
8 files changed, 136 insertions(+), 70 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index a90d736..fc32821 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2103,9 +2103,14 @@ int bnx2x_rss(struct bnx2x *bp, struct bnx2x_rss_config_obj *rss_obj,
if (rss_obj->udp_rss_v6)
__set_bit(BNX2X_RSS_IPV6_UDP, ¶ms.rss_flags);
- if (!CHIP_IS_E1x(bp))
+ if (!CHIP_IS_E1x(bp)) {
+ /* valid only for TUNN_MODE_VXLAN tunnel mode */
+ __set_bit(BNX2X_RSS_IPV4_VXLAN, ¶ms.rss_flags);
+ __set_bit(BNX2X_RSS_IPV6_VXLAN, ¶ms.rss_flags);
+
/* valid only for TUNN_MODE_GRE tunnel mode */
- __set_bit(BNX2X_RSS_GRE_INNER_HDRS, ¶ms.rss_flags);
+ __set_bit(BNX2X_RSS_TUNN_INNER_HDRS, ¶ms.rss_flags);
+ }
} else {
__set_bit(BNX2X_RSS_MODE_DISABLED, ¶ms.rss_flags);
}
@@ -3677,7 +3682,7 @@ static void bnx2x_update_pbds_gso_enc(struct sk_buff *skb,
pbd2->fw_ip_hdr_to_payload_w =
hlen_w - ((sizeof(struct ipv6hdr)) >> 1);
pbd_e2->data.tunnel_data.flags |=
- ETH_TUNNEL_DATA_IP_HDR_TYPE_OUTER;
+ ETH_TUNNEL_DATA_IPV6_OUTER;
}
pbd2->tcp_send_seq = bswab32(inner_tcp_hdr(skb)->seq);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index 03b7404..ec50d12 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -936,9 +936,7 @@ static inline int bnx2x_func_start(struct bnx2x *bp)
else /* CHIP_IS_E1X */
start_params->network_cos_mode = FW_WRR;
- start_params->tunnel_mode = TUNN_MODE_GRE;
- start_params->gre_tunnel_type = IPGRE_TUNNEL;
- start_params->inner_gre_rss_en = 1;
+ start_params->inner_rss = 1;
if (IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) {
start_params->class_fail_ethtype = ETH_P_FIP;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
index 6e4294e..b50f154 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
@@ -1850,6 +1850,8 @@ static void bnx2x_dcbx_fw_struct(struct bnx2x *bp,
if (bp->dcbx_port_params.ets.cos_params[cos].
pri_bitmask & pri_bit)
tt2cos[pri].cos = cos;
+
+ pfc_fw_cfg->dcb_outer_pri[pri] = ttp[pri];
}
/* we never want the FW to add a 0 vlan tag */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
index 7636e3c..bfda526 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
@@ -372,7 +372,7 @@
#define MAX_COS_NUMBER 4
#define MAX_TRAFFIC_TYPES 8
#define MAX_PFC_PRIORITIES 8
-
+#define MAX_VLAN_PRIORITIES 8
/* used by array traffic_type_to_priority[] to mark traffic type \
that is not mapped to priority*/
#define LLFC_TRAFFIC_TYPE_TO_PRIORITY_UNMAPPED 0xFF
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 058bc73..2b6f97b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -2898,8 +2898,8 @@ struct afex_stats {
};
#define BCM_5710_FW_MAJOR_VERSION 7
-#define BCM_5710_FW_MINOR_VERSION 10
-#define BCM_5710_FW_REVISION_VERSION 51
+#define BCM_5710_FW_MINOR_VERSION 12
+#define BCM_5710_FW_REVISION_VERSION 30
#define BCM_5710_FW_ENGINEERING_VERSION 0
#define BCM_5710_FW_COMPILE_FLAGS 1
@@ -3901,7 +3901,11 @@ struct eth_fast_path_rx_cqe {
__le16 len_on_bd;
struct parsing_flags pars_flags;
union eth_sgl_or_raw_data sgl_or_raw_data;
- __le32 reserved1[7];
+ u8 tunn_type;
+ u8 tunn_inner_hdrs_offset;
+ __le16 reserved1;
+ __le32 tunn_tenant_id;
+ __le32 padding[5];
u32 marker;
};
@@ -4012,8 +4016,8 @@ struct eth_tunnel_data {
__le16 pseudo_csum;
u8 ip_hdr_start_inner_w;
u8 flags;
-#define ETH_TUNNEL_DATA_IP_HDR_TYPE_OUTER (0x1<<0)
-#define ETH_TUNNEL_DATA_IP_HDR_TYPE_OUTER_SHIFT 0
+#define ETH_TUNNEL_DATA_IPV6_OUTER (0x1<<0)
+#define ETH_TUNNEL_DATA_IPV6_OUTER_SHIFT 0
#define ETH_TUNNEL_DATA_RESERVED (0x7F<<1)
#define ETH_TUNNEL_DATA_RESERVED_SHIFT 1
};
@@ -4120,16 +4124,12 @@ struct eth_rss_update_ramrod_data {
#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_UDP_CAPABILITY_SHIFT 6
#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_VXLAN_CAPABILITY (0x1<<7)
#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_VXLAN_CAPABILITY_SHIFT 7
-#define ETH_RSS_UPDATE_RAMROD_DATA_EN_5_TUPLE_CAPABILITY (0x1<<8)
-#define ETH_RSS_UPDATE_RAMROD_DATA_EN_5_TUPLE_CAPABILITY_SHIFT 8
-#define ETH_RSS_UPDATE_RAMROD_DATA_NVGRE_KEY_ENTROPY_CAPABILITY (0x1<<9)
-#define ETH_RSS_UPDATE_RAMROD_DATA_NVGRE_KEY_ENTROPY_CAPABILITY_SHIFT 9
-#define ETH_RSS_UPDATE_RAMROD_DATA_GRE_INNER_HDRS_CAPABILITY (0x1<<10)
-#define ETH_RSS_UPDATE_RAMROD_DATA_GRE_INNER_HDRS_CAPABILITY_SHIFT 10
-#define ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY (0x1<<11)
-#define ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY_SHIFT 11
-#define ETH_RSS_UPDATE_RAMROD_DATA_RESERVED (0xF<<12)
-#define ETH_RSS_UPDATE_RAMROD_DATA_RESERVED_SHIFT 12
+#define ETH_RSS_UPDATE_RAMROD_DATA_TUNN_INNER_HDRS_CAPABILITY (0x1<<8)
+#define ETH_RSS_UPDATE_RAMROD_DATA_TUNN_INNER_HDRS_CAPABILITY_SHIFT 8
+#define ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY (0x1<<9)
+#define ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY_SHIFT 9
+#define ETH_RSS_UPDATE_RAMROD_DATA_RESERVED (0x3F<<10)
+#define ETH_RSS_UPDATE_RAMROD_DATA_RESERVED_SHIFT 10
u8 rss_result_mask;
u8 reserved3;
__le16 reserved4;
@@ -4314,6 +4314,18 @@ enum eth_tunnel_non_lso_csum_location {
MAX_ETH_TUNNEL_NON_LSO_CSUM_LOCATION
};
+enum eth_tunn_type {
+ TUNN_TYPE_NONE,
+ TUNN_TYPE_VXLAN,
+ TUNN_TYPE_L2_GRE,
+ TUNN_TYPE_IPV4_GRE,
+ TUNN_TYPE_IPV6_GRE,
+ TUNN_TYPE_L2_GENEVE,
+ TUNN_TYPE_IPV4_GENEVE,
+ TUNN_TYPE_IPV6_GENEVE,
+ MAX_ETH_TUNN_TYPE
+};
+
/*
* Tx regular BD structure
*/
@@ -4758,6 +4770,9 @@ struct afex_vif_list_ramrod_data {
__le16 reserved1;
};
+struct c2s_pri_trans_table_entry {
+ u8 val[MAX_VLAN_PRIORITIES];
+};
/*
* cfc delete event data
@@ -5246,6 +5261,7 @@ struct flow_control_configuration {
u8 dont_add_pri_0_en;
u8 reserved1;
__le32 reserved2;
+ u8 dcb_outer_pri[MAX_TRAFFIC_TYPES];
};
@@ -5260,18 +5276,25 @@ struct function_start_data {
u8 path_id;
u8 network_cos_mode;
u8 dmae_cmd_id;
- u8 tunnel_mode;
- u8 gre_tunnel_type;
- u8 tunn_clss_en;
- u8 inner_gre_rss_en;
- u8 sd_accept_mf_clss_fail;
+ u8 no_added_tags;
+ __le16 reserved0;
+ __le32 reserved1;
+ u8 inner_clss_vxlan;
+ u8 inner_clss_l2gre;
+ u8 inner_clss_l2geneve;
+ u8 inner_rss;
__le16 vxlan_dst_port;
+ __le16 geneve_dst_port;
+ u8 sd_accept_mf_clss_fail;
+ u8 sd_accept_mf_clss_fail_match_ethtype;
__le16 sd_accept_mf_clss_fail_ethtype;
__le16 sd_vlan_eth_type;
u8 sd_vlan_force_pri_flg;
u8 sd_vlan_force_pri_val;
- u8 sd_accept_mf_clss_fail_match_ethtype;
- u8 no_added_tags;
+ u8 c2s_pri_tt_valid;
+ u8 c2s_pri_default;
+ u8 reserved2[6];
+ struct c2s_pri_trans_table_entry c2s_pri_trans_table;
};
struct function_update_data {
@@ -5289,11 +5312,12 @@ struct function_update_data {
u8 tx_switch_suspend;
u8 echo;
u8 update_tunn_cfg_flg;
- u8 tunnel_mode;
- u8 gre_tunnel_type;
- u8 tunn_clss_en;
- u8 inner_gre_rss_en;
+ u8 inner_clss_vxlan;
+ u8 inner_clss_l2gre;
+ u8 inner_clss_l2geneve;
+ u8 inner_rss;
__le16 vxlan_dst_port;
+ __le16 geneve_dst_port;
u8 sd_vlan_force_pri_change_flg;
u8 sd_vlan_force_pri_flg;
u8 sd_vlan_force_pri_val;
@@ -5302,6 +5326,8 @@ struct function_update_data {
u8 reserved1;
__le16 sd_vlan_tag;
__le16 sd_vlan_eth_type;
+ __le16 reserved0;
+ __le32 reserved2;
};
/*
@@ -5330,15 +5356,6 @@ struct fw_version {
#define __FW_VERSION_RESERVED_SHIFT 4
};
-
-/* GRE Tunnel Mode */
-enum gre_tunnel_type {
- NVGRE_TUNNEL,
- L2GRE_TUNNEL,
- IPGRE_TUNNEL,
- MAX_GRE_TUNNEL_TYPE
-};
-
/*
* Dynamic Host-Coalescing - Driver(host) counters
*/
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index c27af12..845471b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -5568,6 +5568,8 @@ static void bnx2x_eq_int(struct bnx2x *bp)
BNX2X_STATE_OPEN):
case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
BNX2X_STATE_OPENING_WAIT4_PORT):
+ case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
+ BNX2X_STATE_CLOSING_WAIT4_HALT):
cid = elem->message.data.eth_event.echo &
BNX2X_SWCID_MASK;
DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n",
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index 4ad415a..c55f780 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -4060,8 +4060,14 @@ static int bnx2x_setup_rss(struct bnx2x *bp,
if (test_bit(BNX2X_RSS_IPV6_UDP, &p->rss_flags))
caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV6_UDP_CAPABILITY;
- if (test_bit(BNX2X_RSS_GRE_INNER_HDRS, &p->rss_flags))
- caps |= ETH_RSS_UPDATE_RAMROD_DATA_GRE_INNER_HDRS_CAPABILITY;
+ if (test_bit(BNX2X_RSS_IPV4_VXLAN, &p->rss_flags))
+ caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV4_VXLAN_CAPABILITY;
+
+ if (test_bit(BNX2X_RSS_IPV6_VXLAN, &p->rss_flags))
+ caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV6_VXLAN_CAPABILITY;
+
+ if (test_bit(BNX2X_RSS_TUNN_INNER_HDRS, &p->rss_flags))
+ caps |= ETH_RSS_UPDATE_RAMROD_DATA_TUNN_INNER_HDRS_CAPABILITY;
/* RSS keys */
if (test_bit(BNX2X_RSS_SET_SRCH, &p->rss_flags)) {
@@ -5669,10 +5675,14 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
rdata->sd_vlan_tag = cpu_to_le16(start_params->sd_vlan_tag);
rdata->path_id = BP_PATH(bp);
rdata->network_cos_mode = start_params->network_cos_mode;
- rdata->tunnel_mode = start_params->tunnel_mode;
- rdata->gre_tunnel_type = start_params->gre_tunnel_type;
- rdata->inner_gre_rss_en = start_params->inner_gre_rss_en;
- rdata->vxlan_dst_port = cpu_to_le16(4789);
+
+ rdata->vxlan_dst_port = cpu_to_le16(start_params->vxlan_dst_port);
+ rdata->geneve_dst_port = cpu_to_le16(start_params->geneve_dst_port);
+ rdata->inner_clss_l2gre = start_params->inner_clss_l2gre;
+ rdata->inner_clss_l2geneve = start_params->inner_clss_l2geneve;
+ rdata->inner_clss_vxlan = start_params->inner_clss_vxlan;
+ rdata->inner_rss = start_params->inner_rss;
+
rdata->sd_accept_mf_clss_fail = start_params->class_fail;
if (start_params->class_fail_ethtype) {
rdata->sd_accept_mf_clss_fail_match_ethtype = 1;
@@ -5690,6 +5700,14 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
cpu_to_le16(0x8100);
rdata->no_added_tags = start_params->no_added_tags;
+
+ rdata->c2s_pri_tt_valid = start_params->c2s_pri_valid;
+ if (rdata->c2s_pri_tt_valid) {
+ memcpy(rdata->c2s_pri_trans_table.val,
+ start_params->c2s_pri,
+ MAX_VLAN_PRIORITIES);
+ rdata->c2s_pri_default = start_params->c2s_pri_default;
+ }
/* No need for an explicit memory barrier here as long we would
* need to ensure the ordering of writing to the SPQ element
* and updating of the SPQ producer which involves a memory
@@ -5750,15 +5768,22 @@ static inline int bnx2x_func_send_switch_update(struct bnx2x *bp,
if (test_bit(BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
&switch_update_params->changes)) {
rdata->update_tunn_cfg_flg = 1;
- if (test_bit(BNX2X_F_UPDATE_TUNNEL_CLSS_EN,
+ if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GRE,
+ &switch_update_params->changes))
+ rdata->inner_clss_l2gre = 1;
+ if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_VXLAN,
+ &switch_update_params->changes))
+ rdata->inner_clss_vxlan = 1;
+ if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GENEVE,
&switch_update_params->changes))
- rdata->tunn_clss_en = 1;
- if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_GRE_RSS_EN,
+ rdata->inner_clss_l2geneve = 1;
+ if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_RSS,
&switch_update_params->changes))
- rdata->inner_gre_rss_en = 1;
- rdata->tunnel_mode = switch_update_params->tunnel_mode;
- rdata->gre_tunnel_type = switch_update_params->gre_tunnel_type;
- rdata->vxlan_dst_port = cpu_to_le16(4789);
+ rdata->inner_rss = 1;
+ rdata->vxlan_dst_port =
+ cpu_to_le16(switch_update_params->vxlan_dst_port);
+ rdata->geneve_dst_port =
+ cpu_to_le16(switch_update_params->geneve_dst_port);
}
rdata->echo = SWITCH_UPDATE;
@@ -5885,6 +5910,8 @@ static inline int bnx2x_func_send_tx_start(struct bnx2x *bp,
rdata->traffic_type_to_priority_cos[i] =
tx_start_params->traffic_type_to_priority_cos[i];
+ for (i = 0; i < MAX_TRAFFIC_TYPES; i++)
+ rdata->dcb_outer_pri[i] = tx_start_params->dcb_outer_pri[i];
/* No need for an explicit memory barrier here as long as we
* ensure the ordering of writing to the SPQ element
* and updating of the SPQ producer which involves a memory
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
index 86baecb..df27bb8 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
@@ -711,7 +711,10 @@ enum {
BNX2X_RSS_IPV6,
BNX2X_RSS_IPV6_TCP,
BNX2X_RSS_IPV6_UDP,
- BNX2X_RSS_GRE_INNER_HDRS,
+
+ BNX2X_RSS_IPV4_VXLAN,
+ BNX2X_RSS_IPV6_VXLAN,
+ BNX2X_RSS_TUNN_INNER_HDRS,
};
struct bnx2x_config_rss_params {
@@ -1105,8 +1108,10 @@ enum {
BNX2X_F_UPDATE_VLAN_FORCE_PRIO_CHNG,
BNX2X_F_UPDATE_VLAN_FORCE_PRIO_FLAG,
BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
- BNX2X_F_UPDATE_TUNNEL_CLSS_EN,
- BNX2X_F_UPDATE_TUNNEL_INNER_GRE_RSS_EN,
+ BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GRE,
+ BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_VXLAN,
+ BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GENEVE,
+ BNX2X_F_UPDATE_TUNNEL_INNER_RSS,
};
/* Allowed Function states */
@@ -1171,19 +1176,23 @@ struct bnx2x_func_start_params {
/* Function cos mode */
u8 network_cos_mode;
- /* TUNN_MODE_NONE/TUNN_MODE_VXLAN/TUNN_MODE_GRE */
- u8 tunnel_mode;
+ /* UDP dest port for VXLAN */
+ u16 vxlan_dst_port;
- /* tunneling classification enablement */
- u8 tunn_clss_en;
+ /* UDP dest port for Geneve */
+ u16 geneve_dst_port;
- /* NVGRE_TUNNEL/L2GRE_TUNNEL/IPGRE_TUNNEL */
- u8 gre_tunnel_type;
+ /* Enable inner Rx classifications for L2GRE packets */
+ u8 inner_clss_l2gre;
- /* Enables Inner GRE RSS on the function, depends on the client RSS
- * capailities
- */
- u8 inner_gre_rss_en;
+ /* Enable inner Rx classifications for L2-Geneve packets */
+ u8 inner_clss_l2geneve;
+
+ /* Enable inner Rx classification for vxlan packets */
+ u8 inner_clss_vxlan;
+
+ /* Enable RSS according to inner header */
+ u8 inner_rss;
/* Allows accepting of packets failing MF classification, possibly
* only matching a given ethertype
@@ -1200,6 +1209,11 @@ struct bnx2x_func_start_params {
/* Prevent inner vlans from being added by FW */
u8 no_added_tags;
+
+ /* Inner-to-Outer vlan priority mapping */
+ u8 c2s_pri[MAX_VLAN_PRIORITIES];
+ u8 c2s_pri_default;
+ u8 c2s_pri_valid;
};
struct bnx2x_func_switch_update_params {
@@ -1207,8 +1221,8 @@ struct bnx2x_func_switch_update_params {
u16 vlan;
u16 vlan_eth_type;
u8 vlan_force_prio;
- u8 tunnel_mode;
- u8 gre_tunnel_type;
+ u16 vxlan_dst_port;
+ u16 geneve_dst_port;
};
struct bnx2x_func_afex_update_params {
@@ -1229,6 +1243,7 @@ struct bnx2x_func_tx_start_params {
u8 dcb_enabled;
u8 dcb_version;
u8 dont_add_pri_0_en;
+ u8 dcb_outer_pri[MAX_TRAFFIC_TYPES];
};
struct bnx2x_func_set_timesync_params {
--
1.9.3
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH net-next 2/6] bnx2x: Rebrand from 'broadcom' into 'qlogic'
2015-07-22 6:16 [PATCH net-next 0/6] bnx2x: update FW, rebrand and more Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 1/6] bnx2x: Utilize FW 7.12.30 Yuval Mintz
@ 2015-07-22 6:16 ` Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 3/6] bnx2x: Add 84858 phy support Yuval Mintz
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Yuval Mintz @ 2015-07-22 6:16 UTC (permalink / raw)
To: davem, netdev; +Cc: Ariel.Elior, Yuval Mintz
bnx2x still appears as a Broadcom driver even though the devices it
utilizes belong to Qlogic for more than a year.
This patch changes the various headers and the device strings to indicate
the correct ownership of the device.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 10 +++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h | 10 +++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h | 10 +++--
.../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 4 +-
.../net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h | 4 +-
.../ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h | 2 +
drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h | 4 +-
.../net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 10 +++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h | 10 +++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 50 +++++++++++-----------
.../net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 14 +++---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h | 14 +++---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 10 +++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 10 +++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h | 4 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 10 +++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h | 22 ++++++----
25 files changed, 142 insertions(+), 88 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index cd4ae76..a59f0b9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1,6 +1,8 @@
-/* bnx2x.h: Broadcom Everest network driver.
+/* bnx2x.h: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index fc32821..e395ae9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -1,6 +1,8 @@
-/* bnx2x_cmn.c: Broadcom Everest network driver.
+/* bnx2x_cmn.c: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index ec50d12..77693d3 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -1,6 +1,8 @@
-/* bnx2x_cmn.h: Broadcom Everest network driver.
+/* bnx2x_cmn.h: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
index b50f154..7ccf668 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
@@ -1,15 +1,17 @@
-/* bnx2x_dcb.c: Broadcom Everest network driver.
+/* bnx2x_dcb.c: QLogic Everest network driver.
*
* Copyright 2009-2013 Broadcom Corporation
+ * Copyright 2014 QLogic Corporation
+ * All rights reserved
*
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h
index c6939ec..9a9517c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h
@@ -1,15 +1,17 @@
-/* bnx2x_dcb.h: Broadcom Everest network driver.
+/* bnx2x_dcb.h: QLogic Everest network driver.
*
* Copyright 2009-2013 Broadcom Corporation
+ * Copyright 2014 QLogic Corporation
+ * All rights reserved
*
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h
index 741aa13..eccfa13 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h
@@ -1,15 +1,17 @@
-/* bnx2x_dump.h: Broadcom Everest network driver.
+/* bnx2x_dump.h: QLogic Everest network driver.
*
* Copyright (c) 2012-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
* consent.
*/
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 76b9052..93c78a8 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -1,6 +1,8 @@
-/* bnx2x_ethtool.c: Broadcom Everest network driver.
+/* bnx2x_ethtool.c: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
index bfda526..226ab29 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
@@ -1,6 +1,8 @@
-/* bnx2x_fw_defs.h: Broadcom Everest network driver.
+/* bnx2x_fw_defs.h: Qlogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h
index 8aafd9b..9e3b5a1 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h
@@ -1,6 +1,8 @@
/* bnx2x_fw_file_hdr.h: FW binary file header structure.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 2b6f97b..a838b6e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -1,6 +1,8 @@
-/* bnx2x_hsi.h: Broadcom Everest network driver.
+/* bnx2x_hsi.h: Qlogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
index d6e1975..46ee2c0 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
@@ -1,7 +1,9 @@
-/* bnx2x_init.h: Broadcom Everest network driver.
+/* bnx2x_init.h: Qlogic Everest network driver.
* Structures and macroes needed during the initialization.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
index 5669ed2..1835d2e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
@@ -1,8 +1,10 @@
-/* bnx2x_init_ops.h: Broadcom Everest network driver.
+/* bnx2x_init_ops.h: Qlogic Everest network driver.
* Static functions needed during the initialization.
* This file is "included" in bnx2x_main.c.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index a0b03c2..7f9ec51 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -1,13 +1,15 @@
/* Copyright 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
- * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other Qlogic software provided under a
+ * license other than the GPL, without Qlogic's express prior written
* consent.
*
* Written by Yaniv Rosner
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
index d9cce4c..b7d2511 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
@@ -1,13 +1,15 @@
/* Copyright 2008-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
- * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other Qlogic software provided under a
+ * license other than the GPL, without Qlogic's express prior written
* consent.
*
* Written by Yaniv Rosner
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 845471b..e85e6ff 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -1,6 +1,8 @@
-/* bnx2x_main.c: Broadcom Everest network driver.
+/* bnx2x_main.c: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -81,11 +83,11 @@
#define TX_TIMEOUT (5*HZ)
static char version[] =
- "Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver "
+ "QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver "
DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
MODULE_AUTHOR("Eliezer Tamir");
-MODULE_DESCRIPTION("Broadcom NetXtreme II "
+MODULE_DESCRIPTION("QLogic "
"BCM57710/57711/57711E/"
"57712/57712_MF/57800/57800_MF/57810/57810_MF/"
"57840/57840_MF Driver");
@@ -163,27 +165,27 @@ enum bnx2x_board_type {
static struct {
char *name;
} board_info[] = {
- [BCM57710] = { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" },
- [BCM57711] = { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" },
- [BCM57711E] = { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" },
- [BCM57712] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" },
- [BCM57712_MF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" },
- [BCM57712_VF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Virtual Function" },
- [BCM57800] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" },
- [BCM57800_MF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" },
- [BCM57800_VF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Virtual Function" },
- [BCM57810] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" },
- [BCM57810_MF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" },
- [BCM57810_VF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Virtual Function" },
- [BCM57840_4_10] = { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" },
- [BCM57840_2_20] = { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" },
- [BCM57840_MF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
- [BCM57840_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" },
- [BCM57811] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet" },
- [BCM57811_MF] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function" },
- [BCM57840_O] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" },
- [BCM57840_MFO] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
- [BCM57811_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" }
+ [BCM57710] = { "QLogic BCM57710 10 Gigabit PCIe [Everest]" },
+ [BCM57711] = { "QLogic BCM57711 10 Gigabit PCIe" },
+ [BCM57711E] = { "QLogic BCM57711E 10 Gigabit PCIe" },
+ [BCM57712] = { "QLogic BCM57712 10 Gigabit Ethernet" },
+ [BCM57712_MF] = { "QLogic BCM57712 10 Gigabit Ethernet Multi Function" },
+ [BCM57712_VF] = { "QLogic BCM57712 10 Gigabit Ethernet Virtual Function" },
+ [BCM57800] = { "QLogic BCM57800 10 Gigabit Ethernet" },
+ [BCM57800_MF] = { "QLogic BCM57800 10 Gigabit Ethernet Multi Function" },
+ [BCM57800_VF] = { "QLogic BCM57800 10 Gigabit Ethernet Virtual Function" },
+ [BCM57810] = { "QLogic BCM57810 10 Gigabit Ethernet" },
+ [BCM57810_MF] = { "QLogic BCM57810 10 Gigabit Ethernet Multi Function" },
+ [BCM57810_VF] = { "QLogic BCM57810 10 Gigabit Ethernet Virtual Function" },
+ [BCM57840_4_10] = { "QLogic BCM57840 10 Gigabit Ethernet" },
+ [BCM57840_2_20] = { "QLogic BCM57840 20 Gigabit Ethernet" },
+ [BCM57840_MF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" },
+ [BCM57840_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" },
+ [BCM57811] = { "QLogic BCM57811 10 Gigabit Ethernet" },
+ [BCM57811_MF] = { "QLogic BCM57811 10 Gigabit Ethernet Multi Function" },
+ [BCM57840_O] = { "QLogic BCM57840 10/20 Gigabit Ethernet" },
+ [BCM57840_MFO] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" },
+ [BCM57811_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" }
};
#ifndef PCI_DEVICE_ID_NX2_57710
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h
index caf1aef..a91ccbf 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h
@@ -1,6 +1,8 @@
-/* bnx2x_mfw_req.h: Broadcom Everest network driver.
+/* bnx2x_mfw_req.h: Qlogic Everest network driver.
*
* Copyright (c) 2012-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index 49d5110..b7d33a1 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -1,6 +1,8 @@
-/* bnx2x_reg.h: Broadcom Everest network driver.
+/* bnx2x_reg.h: Qlogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index c55f780..0d7468e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -1,15 +1,17 @@
-/* bnx2x_sp.c: Broadcom Everest network driver.
+/* bnx2x_sp.c: Qlogic Everest network driver.
*
- * Copyright (c) 2011-2013 Broadcom Corporation
+ * Copyright 2011-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and Qlogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
- * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other Qlogic software provided under a
+ * license other than the GPL, without Qlogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
index df27bb8..324e9f9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
@@ -1,15 +1,17 @@
-/* bnx2x_sp.h: Broadcom Everest network driver.
+/* bnx2x_sp.h: Qlogic Everest network driver.
*
- * Copyright (c) 2011-2013 Broadcom Corporation
+ * Copyright 2011-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and Qlogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
- * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ * at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other Qlogic software provided under a
+ * license other than the GPL, without Qlogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index f67348d..4d5c7b3 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -1,15 +1,17 @@
-/* bnx2x_sriov.c: Broadcom Everest network driver.
+/* bnx2x_sriov.c: QLogic Everest network driver.
*
* Copyright 2009-2013 Broadcom Corporation
+ * Copyright 2014 QLogic Corporation
+ * All rights reserved
*
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index 66ee62a..2011205 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -1,15 +1,17 @@
-/* bnx2x_sriov.h: Broadcom Everest network driver.
+/* bnx2x_sriov.h: QLogic Everest network driver.
*
* Copyright 2009-2013 Broadcom Corporation
+ * Copyright 2014 QLogic Corporation
+ * All rights reserved
*
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
index 69d699f0..7e0919a 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
@@ -1,6 +1,8 @@
-/* bnx2x_stats.c: Broadcom Everest network driver.
+/* bnx2x_stats.c: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
index 965539a..b2644ed 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
@@ -1,6 +1,8 @@
-/* bnx2x_stats.h: Broadcom Everest network driver.
+/* bnx2x_stats.h: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index 06b8c0d..31b79bd 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -1,15 +1,17 @@
-/* bnx2x_vfpf.c: Broadcom Everest network driver.
+/* bnx2x_vfpf.c: QLogic Everest network driver.
*
* Copyright 2009-2013 Broadcom Corporation
+ * Copyright 2014 QLogic Corporation
+ * All rights reserved
*
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
+ * software in any way with any other QLogic software provided under a
+ * license other than the GPL, without QLogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h
index b86479f..f0110f4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h
@@ -1,16 +1,22 @@
-/* bnx2x_vfpf.h: Broadcom Everest network driver.
+/* bnx2x_vfpf.h: Qlogic Everest network driver.
*
* Copyright (c) 2011-2013 Broadcom Corporation
+ * Copyright (c) 2014 QLogic Corporation
+ * All rights reserved
*
- * Unless you and Broadcom execute a separate written software license
+ * Unless you and Qlogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
- * under the terms of the GNU General Public License version 2, available
- * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ * under the terms of the GNU General Public License version 2 (the “GPL”),
+ * available at http://www.gnu.org/licenses/gpl-2.0.html, with the following
+ * added to such license:
*
- * Notwithstanding the above, under no circumstances may you combine this
- * software in any way with any other Broadcom software provided under a
- * license other than the GPL, without Broadcom's express prior written
- * consent.
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions
+ * of the license of that module. An independent module is a module which is
+ * not derived from this software. The special exception does not apply to any
+ * modifications of the software.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
* Written by: Ariel Elior <ariel.elior@qlogic.com>
--
1.9.3
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH net-next 3/6] bnx2x: Add 84858 phy support
2015-07-22 6:16 [PATCH net-next 0/6] bnx2x: update FW, rebrand and more Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 1/6] bnx2x: Utilize FW 7.12.30 Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 2/6] bnx2x: Rebrand from 'broadcom' into 'qlogic' Yuval Mintz
@ 2015-07-22 6:16 ` Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 4/6] bnx2x: new Multi-function mode - BD Yuval Mintz
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Yuval Mintz @ 2015-07-22 6:16 UTC (permalink / raw)
To: davem, netdev; +Cc: Ariel.Elior, Yaniv Rosner, Yuval Mintz
From: Yaniv Rosner <Yaniv.Rosner@qlogic.com>
This adds support to a new copper phy.
Signed-off-by: Yaniv Rosner <Yaniv.Rosner@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 3 +
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 244 ++++++++++++++++++-----
drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 58 +++---
3 files changed, 232 insertions(+), 73 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index a838b6e..5425de0 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -731,6 +731,7 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8722 0x00000f00
#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM54616 0x00001000
#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84834 0x00001100
+ #define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84858 0x00001200
#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_FAILURE 0x0000fd00
#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_NOT_CONN 0x0000ff00
@@ -788,6 +789,7 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722 0x00000f00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616 0x00001000
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834 0x00001100
+ #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858 0x00001200
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT_WC 0x0000fc00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00
@@ -2253,6 +2255,7 @@ struct shmem2_region {
u32 reserved4; /* Offset 0x150 */
u32 link_attr_sync[PORT_MAX]; /* Offset 0x154 */
#define LINK_ATTR_SYNC_KR2_ENABLE 0x00000001
+ #define LINK_ATTR_84858 0x00000002
#define LINK_SFP_EEPROM_COMP_CODE_MASK 0x0000ff00
#define LINK_SFP_EEPROM_COMP_CODE_SHIFT 8
#define LINK_SFP_EEPROM_COMP_CODE_SR 0x00001000
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 7f9ec51..d946bba 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -9654,6 +9654,13 @@ static void bnx2x_8727_link_reset(struct bnx2x_phy *phy,
/******************************************************************/
/* BCM8481/BCM84823/BCM84833 PHY SECTION */
/******************************************************************/
+static int bnx2x_is_8483x_8485x(struct bnx2x_phy *phy)
+{
+ return ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
+ (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) ||
+ (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858));
+}
+
static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy,
struct bnx2x *bp,
u8 port)
@@ -9668,8 +9675,7 @@ static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy,
};
u16 fw_ver1;
- if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) {
+ if (bnx2x_is_8483x_8485x(phy)) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, 0x400f, &fw_ver1);
bnx2x_save_spirom_version(bp, port, fw_ver1 & 0xfff,
phy->ver_addr);
@@ -9751,8 +9757,7 @@ static void bnx2x_848xx_set_led(struct bnx2x *bp,
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
- if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834))
+ if (bnx2x_is_8483x_8485x(phy))
offset = MDIO_PMA_REG_84833_CTL_LED_CTL_1;
else
offset = MDIO_PMA_REG_84823_CTL_LED_CTL_1;
@@ -9770,8 +9775,7 @@ static void bnx2x_848xx_specific_func(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
switch (action) {
case PHY_INIT:
- if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) &&
- (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) {
+ if (!bnx2x_is_8483x_8485x(phy)) {
/* Save spirom version */
bnx2x_save_848xx_spirom_version(phy, bp, params->port);
}
@@ -9903,8 +9907,7 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
/* Always write this if this is not 84833/4.
* For 84833/4, write it only when it's a forced speed.
*/
- if (((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) &&
- (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) ||
+ if (!bnx2x_is_8483x_8485x(phy) ||
((autoneg_val & (1<<12)) == 0))
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD,
@@ -9951,8 +9954,86 @@ static int bnx2x_8481_config_init(struct bnx2x_phy *phy,
return bnx2x_848xx_cmn_config_init(phy, params, vars);
}
-#define PHY84833_CMDHDLR_WAIT 300
-#define PHY84833_CMDHDLR_MAX_ARGS 5
+#define PHY848xx_CMDHDLR_WAIT 300
+#define PHY848xx_CMDHDLR_MAX_ARGS 5
+
+static int bnx2x_84858_cmd_hdlr(struct bnx2x_phy *phy,
+ struct link_params *params,
+ u16 fw_cmd,
+ u16 cmd_args[], int argc)
+{
+ int idx;
+ u16 val;
+ struct bnx2x *bp = params->bp;
+
+ /* Step 1: Poll the STATUS register to see whether the previous command
+ * is in progress or the system is busy (CMD_IN_PROGRESS or
+ * SYSTEM_BUSY). If previous command is in progress or system is busy,
+ * check again until the previous command finishes execution and the
+ * system is available for taking command
+ */
+
+ for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
+ bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
+ MDIO_848xx_CMD_HDLR_STATUS, &val);
+ if ((val != PHY84858_STATUS_CMD_IN_PROGRESS) &&
+ (val != PHY84858_STATUS_CMD_SYSTEM_BUSY))
+ break;
+ usleep_range(1000, 2000);
+ }
+ if (idx >= PHY848xx_CMDHDLR_WAIT) {
+ DP(NETIF_MSG_LINK, "FW cmd: FW not ready.\n");
+ return -EINVAL;
+ }
+
+ /* Step2: If any parameters are required for the function, write them
+ * to the required DATA registers
+ */
+
+ for (idx = 0; idx < argc; idx++) {
+ bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
+ MDIO_848xx_CMD_HDLR_DATA1 + idx,
+ cmd_args[idx]);
+ }
+
+ /* Step3: When the firmware is ready for commands, write the 'Command
+ * code' to the CMD register
+ */
+ bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
+ MDIO_848xx_CMD_HDLR_COMMAND, fw_cmd);
+
+ /* Step4: Once the command has been written, poll the STATUS register
+ * to check whether the command has completed (CMD_COMPLETED_PASS/
+ * CMD_FOR_CMDS or CMD_COMPLETED_ERROR).
+ */
+
+ for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
+ bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
+ MDIO_848xx_CMD_HDLR_STATUS, &val);
+ if ((val == PHY84858_STATUS_CMD_COMPLETE_PASS) ||
+ (val == PHY84858_STATUS_CMD_COMPLETE_ERROR))
+ break;
+ usleep_range(1000, 2000);
+ }
+ if ((idx >= PHY848xx_CMDHDLR_WAIT) ||
+ (val == PHY84858_STATUS_CMD_COMPLETE_ERROR)) {
+ DP(NETIF_MSG_LINK, "FW cmd failed.\n");
+ return -EINVAL;
+ }
+ /* Step5: Once the command has completed, read the specficied DATA
+ * registers for any saved results for the command, if applicable
+ */
+
+ /* Gather returning data */
+ for (idx = 0; idx < argc; idx++) {
+ bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
+ MDIO_848xx_CMD_HDLR_DATA1 + idx,
+ &cmd_args[idx]);
+ }
+
+ return 0;
+}
+
static int bnx2x_84833_cmd_hdlr(struct bnx2x_phy *phy,
struct link_params *params, u16 fw_cmd,
u16 cmd_args[], int argc)
@@ -9962,16 +10043,16 @@ static int bnx2x_84833_cmd_hdlr(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
/* Write CMD_OPEN_OVERRIDE to STATUS reg */
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_STATUS,
+ MDIO_848xx_CMD_HDLR_STATUS,
PHY84833_STATUS_CMD_OPEN_OVERRIDE);
- for (idx = 0; idx < PHY84833_CMDHDLR_WAIT; idx++) {
+ for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_STATUS, &val);
+ MDIO_848xx_CMD_HDLR_STATUS, &val);
if (val == PHY84833_STATUS_CMD_OPEN_FOR_CMDS)
break;
usleep_range(1000, 2000);
}
- if (idx >= PHY84833_CMDHDLR_WAIT) {
+ if (idx >= PHY848xx_CMDHDLR_WAIT) {
DP(NETIF_MSG_LINK, "FW cmd: FW not ready.\n");
return -EINVAL;
}
@@ -9979,42 +10060,62 @@ static int bnx2x_84833_cmd_hdlr(struct bnx2x_phy *phy,
/* Prepare argument(s) and issue command */
for (idx = 0; idx < argc; idx++) {
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_DATA1 + idx,
+ MDIO_848xx_CMD_HDLR_DATA1 + idx,
cmd_args[idx]);
}
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_COMMAND, fw_cmd);
- for (idx = 0; idx < PHY84833_CMDHDLR_WAIT; idx++) {
+ MDIO_848xx_CMD_HDLR_COMMAND, fw_cmd);
+ for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_STATUS, &val);
+ MDIO_848xx_CMD_HDLR_STATUS, &val);
if ((val == PHY84833_STATUS_CMD_COMPLETE_PASS) ||
- (val == PHY84833_STATUS_CMD_COMPLETE_ERROR))
+ (val == PHY84833_STATUS_CMD_COMPLETE_ERROR))
break;
usleep_range(1000, 2000);
}
- if ((idx >= PHY84833_CMDHDLR_WAIT) ||
- (val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) {
+ if ((idx >= PHY848xx_CMDHDLR_WAIT) ||
+ (val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) {
DP(NETIF_MSG_LINK, "FW cmd failed.\n");
return -EINVAL;
}
/* Gather returning data */
for (idx = 0; idx < argc; idx++) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_DATA1 + idx,
+ MDIO_848xx_CMD_HDLR_DATA1 + idx,
&cmd_args[idx]);
}
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
- MDIO_84833_CMD_HDLR_STATUS,
+ MDIO_848xx_CMD_HDLR_STATUS,
PHY84833_STATUS_CMD_CLEAR_COMPLETE);
return 0;
}
-static int bnx2x_84833_pair_swap_cfg(struct bnx2x_phy *phy,
- struct link_params *params,
- struct link_vars *vars)
+static int bnx2x_848xx_cmd_hdlr(struct bnx2x_phy *phy,
+ struct link_params *params,
+ u16 fw_cmd,
+ u16 cmd_args[], int argc)
+{
+ struct bnx2x *bp = params->bp;
+
+ if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) ||
+ (REG_RD(bp, params->shmem2_base +
+ offsetof(struct shmem2_region,
+ link_attr_sync[params->port])) &
+ LINK_ATTR_84858)) {
+ return bnx2x_84858_cmd_hdlr(phy, params, fw_cmd, cmd_args,
+ argc);
+ } else {
+ return bnx2x_84833_cmd_hdlr(phy, params, fw_cmd, cmd_args,
+ argc);
+ }
+}
+
+static int bnx2x_848xx_pair_swap_cfg(struct bnx2x_phy *phy,
+ struct link_params *params,
+ struct link_vars *vars)
{
u32 pair_swap;
- u16 data[PHY84833_CMDHDLR_MAX_ARGS];
+ u16 data[PHY848xx_CMDHDLR_MAX_ARGS];
int status;
struct bnx2x *bp = params->bp;
@@ -10030,8 +10131,9 @@ static int bnx2x_84833_pair_swap_cfg(struct bnx2x_phy *phy,
/* Only the second argument is used for this command */
data[1] = (u16)pair_swap;
- status = bnx2x_84833_cmd_hdlr(phy, params,
- PHY84833_CMD_SET_PAIR_SWAP, data, PHY84833_CMDHDLR_MAX_ARGS);
+ status = bnx2x_848xx_cmd_hdlr(phy, params,
+ PHY848xx_CMD_SET_PAIR_SWAP, data,
+ PHY848xx_CMDHDLR_MAX_ARGS);
if (status == 0)
DP(NETIF_MSG_LINK, "Pairswap OK, val=0x%x\n", data[1]);
@@ -10120,8 +10222,8 @@ static int bnx2x_8483x_disable_eee(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "Don't Advertise 10GBase-T EEE\n");
/* Prevent Phy from working in EEE and advertising it */
- rc = bnx2x_84833_cmd_hdlr(phy, params,
- PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1);
+ rc = bnx2x_848xx_cmd_hdlr(phy, params,
+ PHY848xx_CMD_SET_EEE_MODE, &cmd_args, 1);
if (rc) {
DP(NETIF_MSG_LINK, "EEE disable failed.\n");
return rc;
@@ -10138,8 +10240,8 @@ static int bnx2x_8483x_enable_eee(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
u16 cmd_args = 1;
- rc = bnx2x_84833_cmd_hdlr(phy, params,
- PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1);
+ rc = bnx2x_848xx_cmd_hdlr(phy, params,
+ PHY848xx_CMD_SET_EEE_MODE, &cmd_args, 1);
if (rc) {
DP(NETIF_MSG_LINK, "EEE enable failed.\n");
return rc;
@@ -10157,7 +10259,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
u8 port, initialize = 1;
u16 val;
u32 actual_phy_selection;
- u16 cmd_args[PHY84833_CMDHDLR_MAX_ARGS];
+ u16 cmd_args[PHY848xx_CMDHDLR_MAX_ARGS];
int rc = 0;
usleep_range(1000, 2000);
@@ -10182,8 +10284,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
/* Wait for GPHY to come out of reset */
msleep(50);
- if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) &&
- (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) {
+ if (!bnx2x_is_8483x_8485x(phy)) {
/* BCM84823 requires that XGXS links up first @ 10G for normal
* behavior.
*/
@@ -10194,7 +10295,19 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
bnx2x_program_serdes(¶ms->phy[INT_PHY], params, vars);
vars->line_speed = temp;
}
+ /* Check if this is actually BCM84858 */
+ if (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) {
+ u16 hw_rev;
+ bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
+ MDIO_AN_REG_848xx_ID_MSB, &hw_rev);
+ if (hw_rev == BCM84858_PHY_ID) {
+ params->link_attr_sync |= LINK_ATTR_84858;
+ bnx2x_update_link_attr(params, params->link_attr_sync);
+ }
+ }
+
+ /* Set dual-media configuration according to configuration */
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
MDIO_CTL_REG_84823_MEDIA, &val);
val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK |
@@ -10239,18 +10352,17 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n",
params->multi_phy_config, val);
- if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) {
- bnx2x_84833_pair_swap_cfg(phy, params, vars);
+ if (bnx2x_is_8483x_8485x(phy)) {
+ bnx2x_848xx_pair_swap_cfg(phy, params, vars);
/* Keep AutogrEEEn disabled. */
cmd_args[0] = 0x0;
cmd_args[1] = 0x0;
cmd_args[2] = PHY84833_CONSTANT_LATENCY + 1;
cmd_args[3] = PHY84833_CONSTANT_LATENCY;
- rc = bnx2x_84833_cmd_hdlr(phy, params,
- PHY84833_CMD_SET_EEE_MODE, cmd_args,
- PHY84833_CMDHDLR_MAX_ARGS);
+ rc = bnx2x_848xx_cmd_hdlr(phy, params,
+ PHY848xx_CMD_SET_EEE_MODE, cmd_args,
+ PHY848xx_CMDHDLR_MAX_ARGS);
if (rc)
DP(NETIF_MSG_LINK, "Cfg AutogrEEEn failed.\n");
}
@@ -10304,8 +10416,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
vars->eee_status &= ~SHMEM_EEE_SUPPORTED_MASK;
}
- if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) {
+ if (bnx2x_is_8483x_8485x(phy)) {
/* Bring PHY out of super isolate mode as the final step. */
bnx2x_cl45_read_and_write(bp, phy,
MDIO_CTL_DEVAD,
@@ -10437,8 +10548,7 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
/* Determine if EEE was negotiated */
- if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834))
+ if (bnx2x_is_8483x_8485x(phy))
bnx2x_eee_an_resolve(phy, params, vars);
}
@@ -11844,6 +11954,40 @@ static const struct bnx2x_phy phy_84834 = {
.phy_specific_func = (phy_specific_func_t)bnx2x_848xx_specific_func
};
+static const struct bnx2x_phy phy_84858 = {
+ .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858,
+ .addr = 0xff,
+ .def_md_devad = 0,
+ .flags = FLAGS_FAN_FAILURE_DET_REQ |
+ FLAGS_REARM_LATCH_SIGNAL,
+ .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
+ .mdio_ctrl = 0,
+ .supported = (SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_TP |
+ SUPPORTED_Autoneg |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause),
+ .media_type = ETH_PHY_BASE_T,
+ .ver_addr = 0,
+ .req_flow_ctrl = 0,
+ .req_line_speed = 0,
+ .speed_cap_mask = 0,
+ .req_duplex = 0,
+ .rsrv = 0,
+ .config_init = (config_init_t)bnx2x_848x3_config_init,
+ .read_status = (read_status_t)bnx2x_848xx_read_status,
+ .link_reset = (link_reset_t)bnx2x_848x3_link_reset,
+ .config_loopback = (config_loopback_t)NULL,
+ .format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver,
+ .hw_reset = (hw_reset_t)bnx2x_84833_hw_reset_phy,
+ .set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led,
+ .phy_specific_func = (phy_specific_func_t)bnx2x_848xx_specific_func
+};
+
static const struct bnx2x_phy phy_54618se = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE,
.addr = 0xff,
@@ -12130,6 +12274,9 @@ static int bnx2x_populate_ext_phy(struct bnx2x *bp,
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834:
*phy = phy_84834;
break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858:
+ *phy = phy_84858;
+ break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE:
*phy = phy_54618se;
@@ -12186,9 +12333,7 @@ static int bnx2x_populate_ext_phy(struct bnx2x *bp,
}
phy->mdio_ctrl = bnx2x_get_emac_base(bp, mdc_mdio_access, port);
- if (((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
- (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) &&
- (phy->ver_addr)) {
+ if (bnx2x_is_8483x_8485x(phy) && (phy->ver_addr)) {
/* Remove 100Mb link supported for BCM84833/4 when phy fw
* version lower than or equal to 1.39
*/
@@ -13283,6 +13428,7 @@ static int bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[],
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834:
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858:
/* GPIO3's are linked, and so both need to be toggled
* to obtain required 2us pulse.
*/
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index b7d33a1..f18bf51 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -7242,6 +7242,9 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0
#define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40
#define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1
+#define MDIO_AN_REG_848xx_ID_MSB 0xffe2
+#define BCM84858_PHY_ID 0x600d
+#define MDIO_AN_REG_848xx_ID_LSB 0xffe3
#define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4
#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6
#define MDIO_AN_REG_8481_1000T_CTRL 0xffe9
@@ -7285,31 +7288,31 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_84833_TOP_CFG_FW_NO_EEE 0x1f81
#define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a
#define MDIO_84833_SUPER_ISOLATE 0x8000
-/* These are mailbox register set used by 84833. */
-#define MDIO_84833_TOP_CFG_SCRATCH_REG0 0x4005
-#define MDIO_84833_TOP_CFG_SCRATCH_REG1 0x4006
-#define MDIO_84833_TOP_CFG_SCRATCH_REG2 0x4007
-#define MDIO_84833_TOP_CFG_SCRATCH_REG3 0x4008
-#define MDIO_84833_TOP_CFG_SCRATCH_REG4 0x4009
-#define MDIO_84833_TOP_CFG_SCRATCH_REG26 0x4037
-#define MDIO_84833_TOP_CFG_SCRATCH_REG27 0x4038
-#define MDIO_84833_TOP_CFG_SCRATCH_REG28 0x4039
-#define MDIO_84833_TOP_CFG_SCRATCH_REG29 0x403a
-#define MDIO_84833_TOP_CFG_SCRATCH_REG30 0x403b
-#define MDIO_84833_TOP_CFG_SCRATCH_REG31 0x403c
-#define MDIO_84833_CMD_HDLR_COMMAND MDIO_84833_TOP_CFG_SCRATCH_REG0
-#define MDIO_84833_CMD_HDLR_STATUS MDIO_84833_TOP_CFG_SCRATCH_REG26
-#define MDIO_84833_CMD_HDLR_DATA1 MDIO_84833_TOP_CFG_SCRATCH_REG27
-#define MDIO_84833_CMD_HDLR_DATA2 MDIO_84833_TOP_CFG_SCRATCH_REG28
-#define MDIO_84833_CMD_HDLR_DATA3 MDIO_84833_TOP_CFG_SCRATCH_REG29
-#define MDIO_84833_CMD_HDLR_DATA4 MDIO_84833_TOP_CFG_SCRATCH_REG30
-#define MDIO_84833_CMD_HDLR_DATA5 MDIO_84833_TOP_CFG_SCRATCH_REG31
+/* These are mailbox register set used by 84833/84858. */
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG0 0x4005
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG1 0x4006
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG2 0x4007
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG3 0x4008
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG4 0x4009
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG26 0x4037
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG27 0x4038
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG28 0x4039
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG29 0x403a
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG30 0x403b
+#define MDIO_848xx_TOP_CFG_SCRATCH_REG31 0x403c
+#define MDIO_848xx_CMD_HDLR_COMMAND (MDIO_848xx_TOP_CFG_SCRATCH_REG0)
+#define MDIO_848xx_CMD_HDLR_STATUS (MDIO_848xx_TOP_CFG_SCRATCH_REG26)
+#define MDIO_848xx_CMD_HDLR_DATA1 (MDIO_848xx_TOP_CFG_SCRATCH_REG27)
+#define MDIO_848xx_CMD_HDLR_DATA2 (MDIO_848xx_TOP_CFG_SCRATCH_REG28)
+#define MDIO_848xx_CMD_HDLR_DATA3 (MDIO_848xx_TOP_CFG_SCRATCH_REG29)
+#define MDIO_848xx_CMD_HDLR_DATA4 (MDIO_848xx_TOP_CFG_SCRATCH_REG30)
+#define MDIO_848xx_CMD_HDLR_DATA5 (MDIO_848xx_TOP_CFG_SCRATCH_REG31)
-/* Mailbox command set used by 84833. */
-#define PHY84833_CMD_SET_PAIR_SWAP 0x8001
-#define PHY84833_CMD_GET_EEE_MODE 0x8008
-#define PHY84833_CMD_SET_EEE_MODE 0x8009
-/* Mailbox status set used by 84833. */
+/* Mailbox command set used by 84833/84858 */
+#define PHY848xx_CMD_SET_PAIR_SWAP 0x8001
+#define PHY848xx_CMD_GET_EEE_MODE 0x8008
+#define PHY848xx_CMD_SET_EEE_MODE 0x8009
+/* Mailbox status set used by 84833 only */
#define PHY84833_STATUS_CMD_RECEIVED 0x0001
#define PHY84833_STATUS_CMD_IN_PROGRESS 0x0002
#define PHY84833_STATUS_CMD_COMPLETE_PASS 0x0004
@@ -7320,6 +7323,13 @@ Theotherbitsarereservedandshouldbezero*/
#define PHY84833_STATUS_CMD_CLEAR_COMPLETE 0x0080
#define PHY84833_STATUS_CMD_OPEN_OVERRIDE 0xa5a5
+/* Mailbox status set used by 84858 only */
+#define PHY84858_STATUS_CMD_RECEIVED 0x0001
+#define PHY84858_STATUS_CMD_IN_PROGRESS 0x0002
+#define PHY84858_STATUS_CMD_COMPLETE_PASS 0x0004
+#define PHY84858_STATUS_CMD_COMPLETE_ERROR 0x0008
+#define PHY84858_STATUS_CMD_SYSTEM_BUSY 0xbbbb
+
/* Warpcore clause 45 addressing */
#define MDIO_WC_DEVAD 0x3
--
1.9.3
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH net-next 4/6] bnx2x: new Multi-function mode - BD
2015-07-22 6:16 [PATCH net-next 0/6] bnx2x: update FW, rebrand and more Yuval Mintz
` (2 preceding siblings ...)
2015-07-22 6:16 ` [PATCH net-next 3/6] bnx2x: Add 84858 phy support Yuval Mintz
@ 2015-07-22 6:16 ` Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 5/6] bnx2x: Add MFW dump support Yuval Mintz
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Yuval Mintz @ 2015-07-22 6:16 UTC (permalink / raw)
To: davem, netdev; +Cc: Ariel.Elior, Yuval Mintz
This adds support to a new multi-function mode, enabling driver to
initialize such devices and correctly interacting with management FW
for fully utilizing their features.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 3 +
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 74 +++++++++++++++++++++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 36 +++++++++++
.../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 3 +
drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 74 ++++++++++++++++++++++
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 56 ++++++++++++----
drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 17 ++++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 3 +
8 files changed, 251 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index a59f0b9..ecf1d7f 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1424,6 +1424,7 @@ enum {
SUB_MF_MODE_UNKNOWN = 0,
SUB_MF_MODE_UFP,
SUB_MF_MODE_NPAR1_DOT_5,
+ SUB_MF_MODE_BD,
};
struct bnx2x {
@@ -1638,6 +1639,8 @@ struct bnx2x {
u8 mf_sub_mode;
#define IS_MF_UFP(bp) (IS_MF_SD(bp) && \
bp->mf_sub_mode == SUB_MF_MODE_UFP)
+#define IS_MF_BD(bp) (IS_MF_SD(bp) && \
+ bp->mf_sub_mode == SUB_MF_MODE_BD)
u8 wol;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index e395ae9..0e392ca 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2517,6 +2517,20 @@ static void bnx2x_bz_fp(struct bnx2x *bp, int index)
fp->mode = TPA_MODE_DISABLED;
}
+void bnx2x_set_os_driver_state(struct bnx2x *bp, u32 state)
+{
+ u32 cur;
+
+ if (!IS_MF_BD(bp) || !SHMEM2_HAS(bp, os_driver_state) || IS_VF(bp))
+ return;
+
+ cur = SHMEM2_RD(bp, os_driver_state[BP_FW_MB_IDX(bp)]);
+ DP(NETIF_MSG_IFUP, "Driver state %08x-->%08x\n",
+ cur, state);
+
+ SHMEM2_WR(bp, os_driver_state[BP_FW_MB_IDX(bp)], state);
+}
+
int bnx2x_load_cnic(struct bnx2x *bp)
{
int i, rc, port = BP_PORT(bp);
@@ -2880,6 +2894,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
/* mark driver is loaded in shmem2 */
u32 val;
val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]);
+ val &= ~DRV_FLAGS_MTU_MASK;
+ val |= (bp->dev->mtu << DRV_FLAGS_MTU_SHIFT);
SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)],
val | DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
DRV_FLAGS_CAPABILITIES_LOADED_L2);
@@ -2896,6 +2912,9 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
if (bp->port.pmf && (bp->state != BNX2X_STATE_DIAG))
bnx2x_dcbx_init(bp, false);
+ if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
+ bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_ACTIVE);
+
DP(NETIF_MSG_IFUP, "Ending successfully NIC load\n");
return 0;
@@ -2963,6 +2982,9 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link)
DP(NETIF_MSG_IFUP, "Starting NIC unload\n");
+ if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
+ bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED);
+
/* mark driver is unloaded in shmem2 */
if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
u32 val;
@@ -4191,6 +4213,41 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
return NETDEV_TX_OK;
}
+void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default)
+{
+ int mfw_vn = BP_FW_MB_IDX(bp);
+ u32 tmp;
+
+ /* If the shmem shouldn't affect configuration, reflect */
+ if (!IS_MF_BD(bp)) {
+ int i;
+
+ for (i = 0; i < BNX2X_MAX_PRIORITY; i++)
+ c2s_map[i] = i;
+ *c2s_default = 0;
+
+ return;
+ }
+
+ tmp = SHMEM2_RD(bp, c2s_pcp_map_lower[mfw_vn]);
+ tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
+ c2s_map[0] = tmp & 0xff;
+ c2s_map[1] = (tmp >> 8) & 0xff;
+ c2s_map[2] = (tmp >> 16) & 0xff;
+ c2s_map[3] = (tmp >> 24) & 0xff;
+
+ tmp = SHMEM2_RD(bp, c2s_pcp_map_upper[mfw_vn]);
+ tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
+ c2s_map[4] = tmp & 0xff;
+ c2s_map[5] = (tmp >> 8) & 0xff;
+ c2s_map[6] = (tmp >> 16) & 0xff;
+ c2s_map[7] = (tmp >> 24) & 0xff;
+
+ tmp = SHMEM2_RD(bp, c2s_pcp_map_default[mfw_vn]);
+ tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
+ *c2s_default = (tmp >> (8 * mfw_vn)) & 0xff;
+}
+
/**
* bnx2x_setup_tc - routine to configure net_device for multi tc
*
@@ -4201,8 +4258,9 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
*/
int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
{
- int cos, prio, count, offset;
struct bnx2x *bp = netdev_priv(dev);
+ u8 c2s_map[BNX2X_MAX_PRIORITY], c2s_def;
+ int cos, prio, count, offset;
/* setup tc must be called under rtnl lock */
ASSERT_RTNL();
@@ -4226,12 +4284,16 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
return -EINVAL;
}
+ bnx2x_get_c2s_mapping(bp, c2s_map, &c2s_def);
+
/* configure priority to traffic class mapping */
for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
- netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
+ int outer_prio = c2s_map[prio];
+
+ netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[outer_prio]);
DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
"mapping priority %d to tc %d\n",
- prio, bp->prio_to_cos[prio]);
+ outer_prio, bp->prio_to_cos[outer_prio]);
}
/* Use this configuration to differentiate tc0 from other COSes
@@ -4285,6 +4347,9 @@ int bnx2x_change_mac_addr(struct net_device *dev, void *p)
if (netif_running(dev))
rc = bnx2x_set_eth_mac(bp, true);
+ if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg))
+ SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
+
return rc;
}
@@ -4838,6 +4903,9 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
*/
dev->mtu = new_mtu;
+ if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg))
+ SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
+
return bnx2x_reload_if_running(dev);
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index 77693d3..b1a6ff2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -622,6 +622,14 @@ int bnx2x_set_features(struct net_device *dev, netdev_features_t features);
*/
void bnx2x_tx_timeout(struct net_device *dev);
+/** bnx2x_get_c2s_mapping - read inner-to-outer vlan configuration
+ * c2s_map should have BNX2X_MAX_PRIORITY entries.
+ * @bp: driver handle
+ * @c2s_map: should have BNX2X_MAX_PRIORITY entries for mapping
+ * @c2s_default: entry for non-tagged configuration
+ */
+void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default);
+
/*********************** Inlines **********************************/
/*********************** Fast path ********************************/
static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
@@ -933,6 +941,27 @@ static inline int bnx2x_func_start(struct bnx2x *bp)
start_params->mf_mode = bp->mf_mode;
start_params->sd_vlan_tag = bp->mf_ov;
+ /* Configure Ethertype for BD mode */
+ if (IS_MF_BD(bp)) {
+ DP(NETIF_MSG_IFUP, "Configuring ethertype 0x88a8 for BD\n");
+ start_params->sd_vlan_eth_type = ETH_P_8021AD;
+ REG_WR(bp, PRS_REG_VLAN_TYPE_0, ETH_P_8021AD);
+ REG_WR(bp, PBF_REG_VLAN_TYPE_0, ETH_P_8021AD);
+ REG_WR(bp, NIG_REG_LLH_E1HOV_TYPE_1, ETH_P_8021AD);
+
+ bnx2x_get_c2s_mapping(bp, start_params->c2s_pri,
+ &start_params->c2s_pri_default);
+ start_params->c2s_pri_valid = 1;
+
+ DP(NETIF_MSG_IFUP,
+ "Inner-to-Outer priority: %02x %02x %02x %02x %02x %02x %02x %02x [Default %02x]\n",
+ start_params->c2s_pri[0], start_params->c2s_pri[1],
+ start_params->c2s_pri[2], start_params->c2s_pri[3],
+ start_params->c2s_pri[4], start_params->c2s_pri[5],
+ start_params->c2s_pri[6], start_params->c2s_pri[7],
+ start_params->c2s_pri_default);
+ }
+
if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp))
start_params->network_cos_mode = STATIC_COS;
else /* CHIP_IS_E1X */
@@ -1339,4 +1368,11 @@ void bnx2x_squeeze_objects(struct bnx2x *bp);
void bnx2x_schedule_sp_rtnl(struct bnx2x*, enum sp_rtnl_flag,
u32 verbose);
+/**
+ * bnx2x_set_os_driver_state - write driver state for management FW usage
+ *
+ * @bp: driver handle
+ * @state: OS_DRIVER_STATE_* value reflecting current driver state
+ */
+void bnx2x_set_os_driver_state(struct bnx2x *bp, u32 state);
#endif /* BNX2X_CMN_H */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 93c78a8..e764ca0 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -1131,6 +1131,9 @@ static int bnx2x_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
} else
bp->wol = 0;
+ if (SHMEM2_HAS(bp, curr_cfg))
+ SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
+
return 0;
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 5425de0..23960df 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -868,6 +868,7 @@ struct shared_feat_cfg { /* NVRAM Offset */
#define SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4 0x00000200
#define SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT 0x00000300
#define SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE 0x00000400
+ #define SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE 0x00000500
#define SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE 0x00000600
#define SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE 0x00000700
@@ -2068,6 +2069,12 @@ struct ncsi_oem_fcoe_features {
#define FCOE_FEATURES4_FEATURE_SETTINGS_OFFSET 0
};
+enum curr_cfg_method_e {
+ CURR_CFG_MET_NONE = 0, /* default config */
+ CURR_CFG_MET_OS = 1,
+ CURR_CFG_MET_VENDOR_SPEC = 2,/* e.g. Option ROM, NPAR, O/S Cfg Utils */
+};
+
struct ncsi_oem_data {
u32 driver_version[4];
struct ncsi_oem_fcoe_features ncsi_oem_fcoe_features;
@@ -2191,6 +2198,8 @@ struct shmem2_region {
#define DRV_FLAGS_CAPABILITIES_LOADED_L2 0x00000002
#define DRV_FLAGS_CAPABILITIES_LOADED_FCOE 0x00000004
#define DRV_FLAGS_CAPABILITIES_LOADED_ISCSI 0x00000008
+#define DRV_FLAGS_MTU_MASK 0xffff0000
+#define DRV_FLAGS_MTU_SHIFT 16
u32 extended_dev_info_shared_cfg_size;
@@ -2273,6 +2282,71 @@ struct shmem2_region {
/* We use indication for each PF (0..3) */
#define MFW_DRV_IND_READ_DONE_OFFSET(_pf_) (1 << (_pf_))
+ union { /* For various OEMs */ /* Offset 0x1a0 */
+ u8 storage_boot_prog[E2_FUNC_MAX];
+ #define STORAGE_BOOT_PROG_MASK 0x000000FF
+ #define STORAGE_BOOT_PROG_NONE 0x00000000
+ #define STORAGE_BOOT_PROG_ISCSI_IP_ACQUIRED 0x00000002
+ #define STORAGE_BOOT_PROG_FCOE_FABRIC_LOGIN_SUCCESS 0x00000002
+ #define STORAGE_BOOT_PROG_TARGET_FOUND 0x00000004
+ #define STORAGE_BOOT_PROG_ISCSI_CHAP_SUCCESS 0x00000008
+ #define STORAGE_BOOT_PROG_FCOE_LUN_FOUND 0x00000008
+ #define STORAGE_BOOT_PROG_LOGGED_INTO_TGT 0x00000010
+ #define STORAGE_BOOT_PROG_IMG_DOWNLOADED 0x00000020
+ #define STORAGE_BOOT_PROG_OS_HANDOFF 0x00000040
+ #define STORAGE_BOOT_PROG_COMPLETED 0x00000080
+
+ u32 oem_i2c_data_addr;
+ };
+
+ /* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */
+ /* For PCP values 0-3 use the map lower */
+ /* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1,
+ * 0x0000FF00 - PCP 2, 0x000000FF PCP 3
+ */
+ u32 c2s_pcp_map_lower[E2_FUNC_MAX]; /* 0x1a4 */
+
+ /* For PCP values 4-7 use the map upper */
+ /* 0xFF000000 - PCP 4, 0x00FF0000 - PCP 5,
+ * 0x0000FF00 - PCP 6, 0x000000FF PCP 7
+ */
+ u32 c2s_pcp_map_upper[E2_FUNC_MAX]; /* 0x1b4 */
+
+ /* For PCP default value get the MSB byte of the map default */
+ u32 c2s_pcp_map_default[E2_FUNC_MAX]; /* 0x1c4 */
+
+ /* FC_NPIV table offset in NVRAM */
+ u32 fc_npiv_nvram_tbl_addr[PORT_MAX]; /* 0x1d4 */
+
+ /* Shows last method that changed configuration of this device */
+ enum curr_cfg_method_e curr_cfg; /* 0x1dc */
+
+ /* Storm FW version, shold be kept in the format 0xMMmmbbdd:
+ * MM - Major, mm - Minor, bb - Build ,dd - Drop
+ */
+ u32 netproc_fw_ver; /* 0x1e0 */
+
+ /* Option ROM SMASH CLP version */
+ u32 clp_ver; /* 0x1e4 */
+
+ u32 pcie_bus_num; /* 0x1e8 */
+
+ u32 sriov_switch_mode; /* 0x1ec */
+ #define SRIOV_SWITCH_MODE_NONE 0x0
+ #define SRIOV_SWITCH_MODE_VEB 0x1
+ #define SRIOV_SWITCH_MODE_VEPA 0x2
+
+ u8 rsrv2[E2_FUNC_MAX]; /* 0x1f0 */
+
+ u32 img_inv_table_addr; /* Address to INV_TABLE_P */ /* 0x1f4 */
+
+ u32 mtu_size[E2_FUNC_MAX]; /* 0x1f8 */
+
+ u32 os_driver_state[E2_FUNC_MAX]; /* 0x208 */
+ #define OS_DRIVER_STATE_NOT_LOADED 0 /* not installed */
+ #define OS_DRIVER_STATE_LOADING 1 /* transition state */
+ #define OS_DRIVER_STATE_DISABLED 2 /* installed but disabled */
+ #define OS_DRIVER_STATE_ACTIVE 3 /* installed and active */
};
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index e85e6ff..0a069fa 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -2918,7 +2918,7 @@ static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp)
func_params.f_obj = &bp->func_obj;
func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
- if (IS_MF_UFP(bp)) {
+ if (IS_MF_UFP(bp) || IS_MF_BD(bp)) {
int func = BP_ABS_FUNC(bp);
u32 val;
@@ -2945,16 +2945,16 @@ static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp)
BNX2X_ERR("Failed to configure FW of S-tag Change to %02x\n",
bp->mf_ov);
goto fail;
+ } else {
+ DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n",
+ bp->mf_ov);
}
-
- DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n", bp->mf_ov);
-
- bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0);
-
- return;
+ } else {
+ goto fail;
}
- /* not supported by SW yet */
+ bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0);
+ return;
fail:
bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE, 0);
}
@@ -7433,6 +7433,9 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
} else
BNX2X_ERR("Bootcode is missing - can not initialize link\n");
+ if (SHMEM2_HAS(bp, netproc_fw_ver))
+ SHMEM2_WR(bp, netproc_fw_ver, REG_RD(bp, XSEM_REG_PRAM));
+
return 0;
}
@@ -11682,7 +11685,7 @@ static void validate_set_si_mode(struct bnx2x *bp)
static int bnx2x_get_hwinfo(struct bnx2x *bp)
{
int /*abs*/func = BP_ABS_FUNC(bp);
- int vn;
+ int vn, mfw_vn;
u32 val = 0, val2 = 0;
int rc = 0;
@@ -11772,6 +11775,7 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
bp->mf_mode = 0;
bp->mf_sub_mode = 0;
vn = BP_VN(bp);
+ mfw_vn = BP_FW_MB_IDX(bp);
if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
@@ -11828,6 +11832,31 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
} else
BNX2X_DEV_INFO("illegal OV for SD\n");
break;
+ case SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE:
+ bp->mf_mode = MULTI_FUNCTION_SD;
+ bp->mf_sub_mode = SUB_MF_MODE_BD;
+ bp->mf_config[vn] =
+ MF_CFG_RD(bp,
+ func_mf_config[func].config);
+
+ if (SHMEM2_HAS(bp, mtu_size)) {
+ int mtu_idx = BP_FW_MB_IDX(bp);
+ u16 mtu_size;
+ u32 mtu;
+
+ mtu = SHMEM2_RD(bp, mtu_size[mtu_idx]);
+ mtu_size = (u16)mtu;
+ DP(NETIF_MSG_IFUP, "Read MTU size %04x [%08x]\n",
+ mtu_size, mtu);
+
+ /* if valid: update device mtu */
+ if (((mtu_size + ETH_HLEN) >=
+ ETH_MIN_PACKET_SIZE) &&
+ (mtu_size <=
+ ETH_MAX_JUMBO_PACKET_SIZE))
+ bp->dev->mtu = mtu_size;
+ }
+ break;
case SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE:
bp->mf_mode = MULTI_FUNCTION_SD;
bp->mf_sub_mode = SUB_MF_MODE_UFP;
@@ -11875,9 +11904,10 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n",
func, bp->mf_ov, bp->mf_ov);
- } else if (bp->mf_sub_mode == SUB_MF_MODE_UFP) {
+ } else if ((bp->mf_sub_mode == SUB_MF_MODE_UFP) ||
+ (bp->mf_sub_mode == SUB_MF_MODE_BD)) {
dev_err(&bp->pdev->dev,
- "Unexpected - no valid MF OV for func %d in UFP mode\n",
+ "Unexpected - no valid MF OV for func %d in UFP/BD mode\n",
func);
bp->path_has_ovlan = true;
} else {
@@ -13565,6 +13595,9 @@ static int bnx2x_init_one(struct pci_dev *pdev,
bnx2x_register_phc(bp);
+ if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
+ bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED);
+
return 0;
init_one_exit:
@@ -13627,6 +13660,7 @@ static void __bnx2x_remove(struct pci_dev *pdev,
/* Power on: we can't let PCI layer write to us while we are in D3 */
if (IS_PF(bp)) {
bnx2x_set_power_state(bp, PCI_D0);
+ bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_NOT_LOADED);
/* Set endianity registers to reset values in case next driver
* boots in different endianty environment.
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
index f18bf51..4dead49 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
@@ -2139,6 +2139,10 @@
/* [RW 1] When this bit is set; the LLH will expect all packets to be with
e1hov */
#define NIG_REG_LLH_E1HOV_MODE 0x160d8
+/* [RW 16] Outer VLAN type identifier for multi-function mode. In non
+ * multi-function mode; it will hold the inner VLAN type. Typically 0x8100.
+ */
+#define NIG_REG_LLH_E1HOV_TYPE_1 0x16028
/* [RW 1] When this bit is set; the LLH will classify the packet before
sending it to the BRB or calculating WoL on it. */
#define NIG_REG_LLH_MF_MODE 0x16024
@@ -2955,7 +2959,12 @@
#define PBF_REG_TQ_OCCUPANCY_Q0 0x1403ac
/* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */
#define PBF_REG_TQ_OCCUPANCY_Q1 0x1403b0
-#define PB_REG_CONTROL 0
+/* [RW 16] One of 8 values that should be compared to type in Ethernet
+ * parsing. If there is a match; the field after Ethernet is the first VLAN.
+ * Reset value is 0x8100 which is the standard VLAN type. Note that when
+ * checking second VLAN; type is compared only to 0x8100.
+ */
+#define PBF_REG_VLAN_TYPE_0 0x15c06c
/* [RW 2] Interrupt mask register #0 read/write */
#define PB_REG_PB_INT_MASK 0x28
/* [R 2] Interrupt register #0 read */
@@ -3374,6 +3383,12 @@
#define PRS_REG_TCM_CURRENT_CREDIT 0x40160
/* [R 8] debug only: TSDM current credit. Transaction based. */
#define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c
+/* [RW 16] One of 8 values that should be compared to type in Ethernet
+ * parsing. If there is a match; the field after Ethernet is the first VLAN.
+ * Reset value is 0x8100 which is the standard VLAN type. Note that when
+ * checking second VLAN; type is compared only to 0x8100.
+ */
+#define PRS_REG_VLAN_TYPE_0 0x401a8
#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT (0x1<<19)
#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF (0x1<<20)
#define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN (0x1<<22)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 4d5c7b3..5b243bc 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -1340,6 +1340,9 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param,
mutex_init(&bp->vfdb->bulletin_mutex);
+ if (SHMEM2_HAS(bp, sriov_switch_mode))
+ SHMEM2_WR(bp, sriov_switch_mode, SRIOV_SWITCH_MODE_VEB);
+
return 0;
failed:
DP(BNX2X_MSG_IOV, "Failed err=%d\n", err);
--
1.9.3
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH net-next 5/6] bnx2x: Add MFW dump support
2015-07-22 6:16 [PATCH net-next 0/6] bnx2x: update FW, rebrand and more Yuval Mintz
` (3 preceding siblings ...)
2015-07-22 6:16 ` [PATCH net-next 4/6] bnx2x: new Multi-function mode - BD Yuval Mintz
@ 2015-07-22 6:16 ` Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 6/6] bnx2x: Bump up driver version to 1.712.30 Yuval Mintz
2015-07-22 17:47 ` [PATCH net-next 0/6] bnx2x: update FW, rebrand and more David Miller
6 siblings, 0 replies; 8+ messages in thread
From: Yuval Mintz @ 2015-07-22 6:16 UTC (permalink / raw)
To: davem, netdev; +Cc: Ariel.Elior, Yuval Mintz
Devices with up-to-date management FW will be able to store register dumps
on their persistent storage - in case management FW identifies a fatal
error it would gather and store such dumps, which could later be retrieved
using specific debug tools.
This patch adds the necessary part in the driver in order to make the
feature operational, as well as update users [under debug] during load
in case their device contains a dump of a previous crash.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 ++
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 ++++
drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 17 ++++++++++++++
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 28 ++++++++++++++++++++++++
4 files changed, 51 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index ecf1d7f..2fe3563 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2582,6 +2582,8 @@ void bnx2x_set_local_cmng(struct bnx2x *bp);
void bnx2x_update_mng_version(struct bnx2x *bp);
+void bnx2x_update_mfw_dump(struct bnx2x *bp);
+
#define MCPR_SCRATCH_BASE(bp) \
(CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 4ad9eeb..7d29bf2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2908,6 +2908,10 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
return -EBUSY;
}
+ /* Update driver data for On-Chip MFW dump. */
+ if (IS_PF(bp))
+ bnx2x_update_mfw_dump(bp);
+
/* If PMF - send ADMIN DCBX msg to MFW to initiate DCBX FSM */
if (bp->port.pmf && (bp->state != BNX2X_STATE_DIAG))
bnx2x_dcbx_init(bp, false);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 53c8818..931b1b9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -2075,6 +2075,20 @@ enum curr_cfg_method_e {
CURR_CFG_MET_VENDOR_SPEC = 2,/* e.g. Option ROM, NPAR, O/S Cfg Utils */
};
+struct mdump_driver_info {
+ u32 epoc;
+ u32 drv_ver;
+ u32 fw_ver;
+
+ u32 valid_dump;
+ #define FIRST_DUMP_VALID (1 << 0)
+ #define SECOND_DUMP_VALID (1 << 1)
+
+ u32 flags;
+ #define ENABLE_ALL_TRIGGERS (0x7fffffff)
+ #define TRIGGER_MDUMP_ONCE (1 << 31)
+};
+
struct ncsi_oem_data {
u32 driver_version[4];
struct ncsi_oem_fcoe_features ncsi_oem_fcoe_features;
@@ -2347,6 +2361,9 @@ struct shmem2_region {
#define OS_DRIVER_STATE_LOADING 1 /* transition state */
#define OS_DRIVER_STATE_DISABLED 2 /* installed but disabled */
#define OS_DRIVER_STATE_ACTIVE 3 /* installed and active */
+
+ /* mini dump driver info */
+ struct mdump_driver_info drv_info; /* 0x218 */
};
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 0a069fa..78e55fe 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -3709,6 +3709,34 @@ out:
ethver, iscsiver, fcoever);
}
+void bnx2x_update_mfw_dump(struct bnx2x *bp)
+{
+ struct timeval epoc;
+ u32 drv_ver;
+ u32 valid_dump;
+
+ if (!SHMEM2_HAS(bp, drv_info))
+ return;
+
+ /* Update Driver load time */
+ do_gettimeofday(&epoc);
+ SHMEM2_WR(bp, drv_info.epoc, epoc.tv_sec);
+
+ drv_ver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true);
+ SHMEM2_WR(bp, drv_info.drv_ver, drv_ver);
+
+ SHMEM2_WR(bp, drv_info.fw_ver, REG_RD(bp, XSEM_REG_PRAM));
+
+ /* Check & notify On-Chip dump. */
+ valid_dump = SHMEM2_RD(bp, drv_info.valid_dump);
+
+ if (valid_dump & FIRST_DUMP_VALID)
+ DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 1st partition\n");
+
+ if (valid_dump & SECOND_DUMP_VALID)
+ DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 2nd partition\n");
+}
+
static void bnx2x_oem_event(struct bnx2x *bp, u32 event)
{
u32 cmd_ok, cmd_fail;
--
1.9.3
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH net-next 6/6] bnx2x: Bump up driver version to 1.712.30
2015-07-22 6:16 [PATCH net-next 0/6] bnx2x: update FW, rebrand and more Yuval Mintz
` (4 preceding siblings ...)
2015-07-22 6:16 ` [PATCH net-next 5/6] bnx2x: Add MFW dump support Yuval Mintz
@ 2015-07-22 6:16 ` Yuval Mintz
2015-07-22 17:47 ` [PATCH net-next 0/6] bnx2x: update FW, rebrand and more David Miller
6 siblings, 0 replies; 8+ messages in thread
From: Yuval Mintz @ 2015-07-22 6:16 UTC (permalink / raw)
To: davem, netdev; +Cc: Ariel.Elior, Yuval Mintz
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 2fe3563..a1f9785 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -32,7 +32,7 @@
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.710.51-0"
+#define DRV_MODULE_VERSION "1.712.30-0"
#define DRV_MODULE_RELDATE "2014/02/10"
#define BNX2X_BC_VER 0x040200
--
1.9.3
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH net-next 0/6] bnx2x: update FW, rebrand and more
2015-07-22 6:16 [PATCH net-next 0/6] bnx2x: update FW, rebrand and more Yuval Mintz
` (5 preceding siblings ...)
2015-07-22 6:16 ` [PATCH net-next 6/6] bnx2x: Bump up driver version to 1.712.30 Yuval Mintz
@ 2015-07-22 17:47 ` David Miller
6 siblings, 0 replies; 8+ messages in thread
From: David Miller @ 2015-07-22 17:47 UTC (permalink / raw)
To: Yuval.Mintz; +Cc: netdev, Ariel.Elior
From: Yuval Mintz <Yuval.Mintz@qlogic.com>
Date: Wed, 22 Jul 2015 09:16:21 +0300
> This patch series does several things - it updates the bnx2x FW into
> 7.12.30 which both contains some small fixes as well as opening the door
> for several new features for the device - mainly vxlan/geneve offloads
> and vlan filtering offload.
> It then adds a new Multi-function mode [BD] which requires this FW in
> order to operate.
>
> In addition, this finally rebrands the driver from a 'broadcom' driver
> into a 'qlogic' driver [although it would still reside under Broadcom's
> tree in the kernel].
Series applied, thanks.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-07-22 17:47 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-22 6:16 [PATCH net-next 0/6] bnx2x: update FW, rebrand and more Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 1/6] bnx2x: Utilize FW 7.12.30 Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 2/6] bnx2x: Rebrand from 'broadcom' into 'qlogic' Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 3/6] bnx2x: Add 84858 phy support Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 4/6] bnx2x: new Multi-function mode - BD Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 5/6] bnx2x: Add MFW dump support Yuval Mintz
2015-07-22 6:16 ` [PATCH net-next 6/6] bnx2x: Bump up driver version to 1.712.30 Yuval Mintz
2015-07-22 17:47 ` [PATCH net-next 0/6] bnx2x: update FW, rebrand and more David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).