From: "Michael S. Tsirkin" <mst@redhat.com>
To: Lan Tianyu <tianyu.lan@intel.com>
Cc: bhelgaas@google.com, carolyn.wyborny@intel.com,
donald.c.skidmore@intel.com, eddie.dong@intel.com,
nrupal.jani@intel.com, yang.z.zhang@intel.com, agraf@suse.de,
kvm@vger.kernel.org, pbonzini@redhat.com, qemu-devel@nongnu.org,
emil.s.tantilov@intel.com, intel-wired-lan@lists.osuosl.org,
jeffrey.t.kirsher@intel.com, jesse.brandeburg@intel.com,
john.ronciak@intel.com, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, matthew.vick@intel.com,
mitch.a.williams@intel.com, netdev@vger.kernel.org,
shannon.nelson@intel.com
Subject: Re: [RFC Patch 09/12] IXGBEVF: Add live migration support for VF driver
Date: Thu, 22 Oct 2015 15:46:47 +0300 [thread overview]
Message-ID: <20151022154120-mutt-send-email-mst@redhat.com> (raw)
In-Reply-To: <1445445464-5056-10-git-send-email-tianyu.lan@intel.com>
On Thu, Oct 22, 2015 at 12:37:41AM +0800, Lan Tianyu wrote:
> To let VF driver in the guest to know migration status, Qemu will
> fake PCI configure reg 0xF0 and 0xF1 to show migrate status and
> get ack from VF driver.
I guess this works for current devices but not using
0xF0/0xF1 registers is not architectural, is it?
So it could conflict with future devices.
Maybe it's better to just have a dedicated para-virtualized
device (PCI,ACPI,etc) for this migration-related activity.
This driver would then register with this it.
> When migration starts, Qemu will set reg "0xF0" to 1, notify
> VF driver via triggering mail box msg and wait for VF driver to tell
> it's ready for migration(set reg "0xF1" to 1).
This waiting for driver is problematic: high load is one of the reasons
people migrate VMs out. It would be much better if we could support
migration while VM is completely stopped.
> After migration, Qemu
> will set reg "0xF0" to 0 and notify VF driver by mail box irq. VF
> driver begins to restore tx/rx function after detecting sttatus change.
>
> When VF receives mail box irq, it will check reg "0xF0" in the service
> task function to get migration status and performs related operations
> according its value.
>
> Steps of restarting receive and transmit function
> 1) Restore VF status in the PF driver via sending mail event to PF driver
> 2) Write back reg values recorded by self emulation layer
> 3) Restart rx/tx ring
> 4) Recovery interrupt
>
> Transmit/Receive descriptor head regs are read-only and can't
> be restored via writing back recording reg value directly and they
> are set to 0 during VF reset. To reuse original tx/rx rings, shift
> desc ring in order to move the desc pointed by original head reg to
> first entry of the ring and then enable tx/rx rings. VF restarts to
> receive and transmit from original head desc.
>
> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
> ---
> drivers/net/ethernet/intel/ixgbevf/defines.h | 6 ++
> drivers/net/ethernet/intel/ixgbevf/ixgbevf.h | 7 +-
> drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 115 ++++++++++++++++++++-
> .../net/ethernet/intel/ixgbevf/self-emulation.c | 107 +++++++++++++++++++
> 4 files changed, 232 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/ixgbevf/defines.h b/drivers/net/ethernet/intel/ixgbevf/defines.h
> index 770e21a..113efd2 100644
> --- a/drivers/net/ethernet/intel/ixgbevf/defines.h
> +++ b/drivers/net/ethernet/intel/ixgbevf/defines.h
> @@ -239,6 +239,12 @@ struct ixgbe_adv_tx_context_desc {
> __le32 mss_l4len_idx;
> };
>
> +union ixgbevf_desc {
> + union ixgbe_adv_tx_desc rx_desc;
> + union ixgbe_adv_rx_desc tx_desc;
> + struct ixgbe_adv_tx_context_desc tx_context_desc;
> +};
> +
> /* Adv Transmit Descriptor Config Masks */
> #define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */
> #define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Desc */
> diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
> index c823616..6eab402e 100644
> --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
> +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf.h
> @@ -109,7 +109,7 @@ struct ixgbevf_ring {
> struct ixgbevf_ring *next;
> struct net_device *netdev;
> struct device *dev;
> - void *desc; /* descriptor ring memory */
> + union ixgbevf_desc *desc; /* descriptor ring memory */
> dma_addr_t dma; /* phys. address of descriptor ring */
> unsigned int size; /* length in bytes */
> u16 count; /* amount of descriptors */
> @@ -493,6 +493,11 @@ extern void ixgbevf_write_eitr(struct ixgbevf_q_vector *q_vector);
>
> void ixgbe_napi_add_all(struct ixgbevf_adapter *adapter);
> void ixgbe_napi_del_all(struct ixgbevf_adapter *adapter);
> +int ixgbevf_tx_ring_shift(struct ixgbevf_ring *r, u32 head);
> +int ixgbevf_rx_ring_shift(struct ixgbevf_ring *r, u32 head);
> +void ixgbevf_restore_state(struct ixgbevf_adapter *adapter);
> +inline void ixgbevf_irq_enable(struct ixgbevf_adapter *adapter);
> +
>
> #ifdef DEBUG
> char *ixgbevf_get_hw_dev_name(struct ixgbe_hw *hw);
> diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
> index 056841c..15ec361 100644
> --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
> +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
> @@ -91,6 +91,10 @@ MODULE_DESCRIPTION("Intel(R) 10 Gigabit Virtual Function Network Driver");
> MODULE_LICENSE("GPL");
> MODULE_VERSION(DRV_VERSION);
>
> +
> +#define MIGRATION_COMPLETED 0x00
> +#define MIGRATION_IN_PROGRESS 0x01
> +
> #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
> static int debug = -1;
> module_param(debug, int, 0);
> @@ -221,6 +225,78 @@ static u64 ixgbevf_get_tx_completed(struct ixgbevf_ring *ring)
> return ring->stats.packets;
> }
>
> +int ixgbevf_tx_ring_shift(struct ixgbevf_ring *r, u32 head)
> +{
> + struct ixgbevf_tx_buffer *tx_buffer = NULL;
> + static union ixgbevf_desc *tx_desc = NULL;
> +
> + tx_buffer = vmalloc(sizeof(struct ixgbevf_tx_buffer) * (r->count));
> + if (!tx_buffer)
> + return -ENOMEM;
> +
> + tx_desc = vmalloc(sizeof(union ixgbevf_desc) * r->count);
> + if (!tx_desc)
> + return -ENOMEM;
> +
> + memcpy(tx_desc, r->desc, sizeof(union ixgbevf_desc) * r->count);
> + memcpy(r->desc, &tx_desc[head], sizeof(union ixgbevf_desc) * (r->count - head));
> + memcpy(&r->desc[r->count - head], tx_desc, sizeof(union ixgbevf_desc) * head);
> +
> + memcpy(tx_buffer, r->tx_buffer_info, sizeof(struct ixgbevf_tx_buffer) * r->count);
> + memcpy(r->tx_buffer_info, &tx_buffer[head], sizeof(struct ixgbevf_tx_buffer) * (r->count - head));
> + memcpy(&r->tx_buffer_info[r->count - head], tx_buffer, sizeof(struct ixgbevf_tx_buffer) * head);
> +
> + if (r->next_to_clean >= head)
> + r->next_to_clean -= head;
> + else
> + r->next_to_clean += (r->count - head);
> +
> + if (r->next_to_use >= head)
> + r->next_to_use -= head;
> + else
> + r->next_to_use += (r->count - head);
> +
> + vfree(tx_buffer);
> + vfree(tx_desc);
> + return 0;
> +}
> +
> +int ixgbevf_rx_ring_shift(struct ixgbevf_ring *r, u32 head)
> +{
> + struct ixgbevf_rx_buffer *rx_buffer = NULL;
> + static union ixgbevf_desc *rx_desc = NULL;
> +
> + rx_buffer = vmalloc(sizeof(struct ixgbevf_rx_buffer) * (r->count));
> + if (!rx_buffer)
> + return -ENOMEM;
> +
> + rx_desc = vmalloc(sizeof(union ixgbevf_desc) * (r->count));
> + if (!rx_desc)
> + return -ENOMEM;
> +
> + memcpy(rx_desc, r->desc, sizeof(union ixgbevf_desc) * (r->count));
> + memcpy(r->desc, &rx_desc[head], sizeof(union ixgbevf_desc) * (r->count - head));
> + memcpy(&r->desc[r->count - head], rx_desc, sizeof(union ixgbevf_desc) * head);
> +
> + memcpy(rx_buffer, r->rx_buffer_info, sizeof(struct ixgbevf_rx_buffer) * (r->count));
> + memcpy(r->rx_buffer_info, &rx_buffer[head], sizeof(struct ixgbevf_rx_buffer) * (r->count - head));
> + memcpy(&r->rx_buffer_info[r->count - head], rx_buffer, sizeof(struct ixgbevf_rx_buffer) * head);
> +
> + if (r->next_to_clean >= head)
> + r->next_to_clean -= head;
> + else
> + r->next_to_clean += (r->count - head);
> +
> + if (r->next_to_use >= head)
> + r->next_to_use -= head;
> + else
> + r->next_to_use += (r->count - head);
> +
> + vfree(rx_buffer);
> + vfree(rx_desc);
> + return 0;
> +}
> +
> static u32 ixgbevf_get_tx_pending(struct ixgbevf_ring *ring)
> {
> struct ixgbevf_adapter *adapter = netdev_priv(ring->netdev);
> @@ -1122,7 +1198,7 @@ static int ixgbevf_busy_poll_recv(struct napi_struct *napi)
> * ixgbevf_configure_msix sets up the hardware to properly generate MSI-X
> * interrupts.
> **/
> -static void ixgbevf_configure_msix(struct ixgbevf_adapter *adapter)
> +static void ixgbevf_configure_msix(struct ixgbevf_adapter *adapter)
> {
> struct ixgbevf_q_vector *q_vector;
> int q_vectors, v_idx;
> @@ -1534,7 +1610,7 @@ static inline void ixgbevf_irq_disable(struct ixgbevf_adapter *adapter)
> * ixgbevf_irq_enable - Enable default interrupt generation settings
> * @adapter: board private structure
> **/
> -static inline void ixgbevf_irq_enable(struct ixgbevf_adapter *adapter)
> +inline void ixgbevf_irq_enable(struct ixgbevf_adapter *adapter)
> {
> struct ixgbe_hw *hw = &adapter->hw;
>
> @@ -2901,6 +2977,36 @@ static void ixgbevf_watchdog_subtask(struct ixgbevf_adapter *adapter)
> ixgbevf_update_stats(adapter);
> }
>
> +int ixgbevf_live_mg(struct ixgbevf_adapter *adapter)
> +{
> + struct pci_dev *pdev = adapter->pdev;
> + static int migration_status = MIGRATION_COMPLETED;
> + u8 val;
> +
> + if (migration_status == MIGRATION_COMPLETED) {
> + pci_read_config_byte(pdev, 0xf0, &val);
> + if (!val)
> + return 0;
> +
> + del_timer_sync(&adapter->service_timer);
> + pr_info("migration start\n");
> + migration_status = MIGRATION_IN_PROGRESS;
> +
> + /* Tell Qemu VF is ready for migration. */
> + pci_write_config_byte(pdev, 0xf1, 0x1);
> + return 1;
> + } else {
> + pci_read_config_byte(pdev, 0xf0, &val);
> + if (val)
> + return 1;
> +
> + ixgbevf_restore_state(adapter);
> + migration_status = MIGRATION_COMPLETED;
> + pr_info("migration end\n");
> + return 0;
> + }
> +}
> +
> /**
> * ixgbevf_service_task - manages and runs subtasks
> * @work: pointer to work_struct containing our data
> @@ -2912,6 +3018,11 @@ static void ixgbevf_service_task(struct work_struct *work)
> service_task);
> struct ixgbe_hw *hw = &adapter->hw;
>
> + if (ixgbevf_live_mg(adapter)) {
> + ixgbevf_service_event_complete(adapter);
> + return;
> + }
> +
> if (IXGBE_REMOVED(hw->hw_addr)) {
> if (!test_bit(__IXGBEVF_DOWN, &adapter->state)) {
> rtnl_lock();
> diff --git a/drivers/net/ethernet/intel/ixgbevf/self-emulation.c b/drivers/net/ethernet/intel/ixgbevf/self-emulation.c
> index d74b2da..4476428 100644
> --- a/drivers/net/ethernet/intel/ixgbevf/self-emulation.c
> +++ b/drivers/net/ethernet/intel/ixgbevf/self-emulation.c
> @@ -9,6 +9,8 @@
>
> static u32 hw_regs[0x4000];
>
> +#define RESTORE_REG(hw, reg) IXGBE_WRITE_REG(hw, reg, hw_regs[reg])
> +
> u32 ixgbe_self_emul_readl(volatile void __iomem *base, u32 addr)
> {
> u32 tmp;
> @@ -24,3 +26,108 @@ void ixgbe_self_emul_writel(u32 val, volatile void __iomem *base, u32 addr)
> hw_regs[(unsigned long)addr] = val;
> writel(val, (volatile void __iomem *)(base + addr));
> }
> +
> +static u32 restore_regs[] = {
> + IXGBE_VTIVAR(0),
> + IXGBE_VTIVAR(1),
> + IXGBE_VTIVAR(2),
> + IXGBE_VTIVAR(3),
> + IXGBE_VTIVAR_MISC,
> + IXGBE_VTEITR(0),
> + IXGBE_VTEITR(1),
> + IXGBE_VFPSRTYPE,
> +};
> +
> +void ixgbevf_restore_state(struct ixgbevf_adapter *adapter)
> +{
> + struct ixgbe_hw *hw = &adapter->hw;
> + struct ixgbe_mbx_info *mbx = &hw->mbx;
> + int i;
> + u32 timeout = IXGBE_VF_INIT_TIMEOUT, rdh, tdh, rxdctl, txdctl;
> + u32 wait_loop = 10;
> +
> + /* VF resetting */
> + IXGBE_WRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
> + IXGBE_WRITE_FLUSH(hw);
> +
> + while (!mbx->ops.check_for_rst(hw) && timeout) {
> + timeout--;
> + udelay(5);
> + }
> + if (!timeout)
> + printk(KERN_ERR "[IXGBEVF] Unable to reset VF.\n");
> +
> + /* Restoring VF status in the status */
> + hw->mac.ops.notify_resume(hw);
> +
> + /* Restoring regs value */
> + for (i = 0; i < sizeof(restore_regs)/sizeof(u32); i++)
> + writel(hw_regs[restore_regs[i]], (volatile void *)(restore_regs[i] + hw->hw_addr));
> +
> + /* Restoring rx ring */
> + for (i = 0; i < adapter->num_rx_queues; i++) {
> + if (hw_regs[IXGBE_VFRXDCTL(i)] & IXGBE_RXDCTL_ENABLE) {
> + RESTORE_REG(hw, IXGBE_VFRDBAL(i));
> + RESTORE_REG(hw, IXGBE_VFRDBAH(i));
> + RESTORE_REG(hw, IXGBE_VFRDLEN(i));
> + RESTORE_REG(hw, IXGBE_VFDCA_RXCTRL(i));
> + RESTORE_REG(hw, IXGBE_VFSRRCTL(i));
> +
> + rdh = adapter->rx_ring[i]->next_to_clean;
> + while (IXGBEVF_RX_DESC(adapter->rx_ring[i], rdh)->wb.upper.status_error
> + & cpu_to_le32(IXGBE_RXD_STAT_DD))
> + rdh = (rdh + 1) % adapter->rx_ring[i]->count;
> +
> + ixgbevf_rx_ring_shift(adapter->rx_ring[i], rdh);
> +
> + wait_loop = 10;
> + RESTORE_REG(hw, IXGBE_VFRXDCTL(i));
> + do {
> + udelay(10);
> + rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
> + } while (--wait_loop && !(rxdctl & IXGBE_RXDCTL_ENABLE));
> +
> + if (!wait_loop)
> + pr_err("RXDCTL.ENABLE queue %d not cleared while polling\n",
> + i);
> +
> + IXGBE_WRITE_REG(hw, IXGBE_VFRDT(i), adapter->rx_ring[i]->next_to_use);
> + }
> + }
> +
> + /* Restoring tx ring */
> + for (i = 0; i < adapter->num_tx_queues; i++) {
> + if (hw_regs[IXGBE_VFTXDCTL(i)] & IXGBE_TXDCTL_ENABLE) {
> + RESTORE_REG(hw, IXGBE_VFTDBAL(i));
> + RESTORE_REG(hw, IXGBE_VFTDBAH(i));
> + RESTORE_REG(hw, IXGBE_VFTDLEN(i));
> + RESTORE_REG(hw, IXGBE_VFDCA_TXCTRL(i));
> +
> + tdh = adapter->tx_ring[i]->next_to_clean;
> + while (IXGBEVF_TX_DESC(adapter->tx_ring[i], tdh)->wb.status
> + & cpu_to_le32(IXGBE_TXD_STAT_DD))
> + tdh = (tdh + 1) % adapter->rx_ring[i]->count;
> + ixgbevf_tx_ring_shift(adapter->tx_ring[i], tdh);
> +
> + wait_loop = 10;
> + RESTORE_REG(hw, IXGBE_VFTXDCTL(i));
> + do {
> + udelay(2000);
> + txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
> + } while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE));
> +
> + if (!wait_loop)
> + pr_err("Could not enable Tx Queue %d\n", i);
> +
> + IXGBE_WRITE_REG(hw, IXGBE_VFTDT(i), adapter->tx_ring[i]->next_to_use);
> + }
> + }
> +
> + /* Restore irq */
> + IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, hw_regs[IXGBE_VTEIMS] & 0x7);
> + IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, (~hw_regs[IXGBE_VTEIMS]) & 0x7);
> + IXGBE_WRITE_REG(hw, IXGBE_VTEICS, hw_regs[IXGBE_VTEICS]);
> +
> + ixgbevf_irq_enable(adapter);
> +}
> +
> --
> 1.8.4.rc0.1.g8f6a3e5.dirty
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2015-10-22 12:46 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-21 16:37 [RFC Patch 00/12] IXGBE: Add live migration support for SRIOV NIC Lan Tianyu
2015-10-21 16:37 ` [RFC Patch 01/12] PCI: Add virtfn_index for struct pci_device Lan Tianyu
2015-10-21 18:07 ` Alexander Duyck
2015-10-24 14:46 ` Lan, Tianyu
2015-10-21 16:37 ` [RFC Patch 02/12] IXGBE: Add new mail box event to restore VF status in the PF driver Lan Tianyu
2015-10-21 20:34 ` Alexander Duyck
2015-10-21 16:37 ` [RFC Patch 03/12] IXGBE: Add sysfs interface for Qemu to migrate " Lan Tianyu
2015-10-21 20:45 ` Alexander Duyck
2015-10-25 7:21 ` Lan, Tianyu
2015-10-21 16:37 ` [RFC Patch 04/12] IXGBE: Add ixgbe_ping_vf() to notify a specified VF via mailbox msg Lan Tianyu
2015-10-21 16:37 ` [RFC Patch 05/12] IXGBE: Add new sysfs interface of "notify_vf" Lan Tianyu
2015-10-21 20:52 ` Alexander Duyck
2015-10-22 12:51 ` Michael S. Tsirkin
2015-10-24 15:43 ` Lan, Tianyu
2015-10-25 6:03 ` Alexander Duyck
2015-10-25 6:45 ` Lan, Tianyu
2015-10-21 16:37 ` [RFC Patch 06/12] IXGBEVF: Add self emulation layer Lan Tianyu
2015-10-21 20:58 ` Alexander Duyck
2015-10-22 12:50 ` [Qemu-devel] " Michael S. Tsirkin
2015-10-22 15:50 ` Alexander Duyck
2015-10-21 16:37 ` [RFC Patch 07/12] IXGBEVF: Add new mail box event for migration Lan Tianyu
2015-10-21 16:37 ` [RFC Patch 08/12] IXGBEVF: Rework code of finding the end transmit desc of package Lan Tianyu
2015-10-21 21:14 ` Alexander Duyck
2015-10-24 16:12 ` Lan, Tianyu
2015-10-22 12:58 ` Michael S. Tsirkin
2015-10-24 16:08 ` Lan, Tianyu
2015-10-21 16:37 ` [RFC Patch 09/12] IXGBEVF: Add live migration support for VF driver Lan Tianyu
2015-10-21 21:48 ` Alexander Duyck
2015-10-22 12:46 ` Michael S. Tsirkin [this message]
2015-10-21 16:37 ` [RFC Patch 10/12] IXGBEVF: Add lock to protect tx/rx ring operation Lan Tianyu
2015-10-21 21:55 ` Alexander Duyck
2015-10-22 12:40 ` Michael S. Tsirkin
2015-10-21 16:37 ` [RFC Patch 11/12] IXGBEVF: Migrate VF statistic data Lan Tianyu
2015-10-22 12:36 ` Michael S. Tsirkin
2015-10-21 16:37 ` [RFC Patch 12/12] IXGBEVF: Track dma dirty pages Lan Tianyu
2015-10-22 12:30 ` Michael S. Tsirkin
2015-10-21 18:45 ` [RFC Patch 00/12] IXGBE: Add live migration support for SRIOV NIC Or Gerlitz
2015-10-21 19:20 ` Alex Williamson
2015-10-21 23:26 ` Alexander Duyck
2015-10-22 12:32 ` [Qemu-devel] " Michael S. Tsirkin
2015-10-22 13:01 ` Alex Williamson
2015-10-22 13:06 ` Michael S. Tsirkin
2015-10-22 15:58 ` Or Gerlitz
2015-10-22 16:17 ` Alex Williamson
2015-10-22 12:55 ` [Qemu-devel] " Michael S. Tsirkin
2015-10-23 18:36 ` Alexander Duyck
2015-10-23 19:05 ` Alex Williamson
2015-10-23 20:01 ` Alexander Duyck
2015-10-26 5:36 ` Lan Tianyu
2015-10-26 15:03 ` Alexander Duyck
2015-10-29 6:12 ` Lan Tianyu
2015-10-29 6:58 ` Alexander Duyck
2015-10-29 8:33 ` Lan Tianyu
2015-10-29 16:17 ` Alexander Duyck
2015-10-30 2:41 ` Lan Tianyu
2015-10-30 18:04 ` Alexander Duyck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151022154120-mutt-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=agraf@suse.de \
--cc=bhelgaas@google.com \
--cc=carolyn.wyborny@intel.com \
--cc=donald.c.skidmore@intel.com \
--cc=eddie.dong@intel.com \
--cc=emil.s.tantilov@intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jesse.brandeburg@intel.com \
--cc=john.ronciak@intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=matthew.vick@intel.com \
--cc=mitch.a.williams@intel.com \
--cc=netdev@vger.kernel.org \
--cc=nrupal.jani@intel.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=shannon.nelson@intel.com \
--cc=tianyu.lan@intel.com \
--cc=yang.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).