* [PATCH net-next v2 0/9] bnxt_en: Updates for net-next.
@ 2016-04-05 18:08 Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 1/9] bnxt_en: Update to Firmware 1.2.2 spec Michael Chan
` (9 more replies)
0 siblings, 10 replies; 15+ messages in thread
From: Michael Chan @ 2016-04-05 18:08 UTC (permalink / raw)
To: davem; +Cc: netdev
Update to latest firmware interface, add EEE feature, unsupported SFP+
module warning, and ethtool -s improvements.
v2: Removed the GEEPROM patch and added more comments to the get_eee patch.
Michael Chan (9):
bnxt_en: Update to Firmware 1.2.2 spec.
bnxt_en: Improve flow control autoneg with Firmware 1.2.1 interface.
bnxt_en: Add basic EEE support.
bnxt_en: Add EEE setup code.
bnxt_en: Add get_eee() and set_eee() ethtool support.
bnxt_en: Set async event bits when registering with the firmware.
bnxt_en: Add unsupported SFP+ module warnings.
bnxt_en: Check for valid forced speed during ethtool -s.
bnxt_en: Improve ethtool .get_settings().
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 259 ++++++++++--
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 17 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 165 ++++++--
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h | 4 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_fw_hdr.h | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h | 433 +++++++++++++++++++--
drivers/net/ethernet/broadcom/bnxt/bnxt_nvm_defs.h | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 14 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h | 2 +-
9 files changed, 803 insertions(+), 95 deletions(-)
--
1.8.3.1
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH net-next v2 1/9] bnxt_en: Update to Firmware 1.2.2 spec.
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
@ 2016-04-05 18:08 ` Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 2/9] bnxt_en: Improve flow control autoneg with Firmware 1.2.1 interface Michael Chan
` (8 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Michael Chan @ 2016-04-05 18:08 UTC (permalink / raw)
To: davem; +Cc: netdev
Use new field names in API structs and stop using deprecated fields
auto_link_speed and auto_duplex in phy_cfg/phy_qcfg structs.
Update copyright year to 2016.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 20 +-
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 8 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 4 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_fw_hdr.h | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h | 433 +++++++++++++++++++--
drivers/net/ethernet/broadcom/bnxt/bnxt_nvm_defs.h | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 14 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h | 2 +-
9 files changed, 431 insertions(+), 56 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 12a009d..bfe98cb 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1,6 +1,6 @@
/* Broadcom NetXtreme-C/E network driver.
*
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -2763,7 +2763,7 @@ static int bnxt_hwrm_func_drv_rgtr(struct bnxt *bp)
* only checks if it is non-zero to enable async event forwarding
*/
req.async_event_fwd[0] |= cpu_to_le32(1);
- req.os_type = cpu_to_le16(1);
+ req.os_type = cpu_to_le16(FUNC_DRV_RGTR_REQ_OS_TYPE_LINUX);
req.ver_maj = DRV_VER_MAJ;
req.ver_min = DRV_VER_MIN;
req.ver_upd = DRV_VER_UPD;
@@ -3726,7 +3726,7 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
pf->fw_fid = le16_to_cpu(resp->fid);
pf->port_id = le16_to_cpu(resp->port_id);
- memcpy(pf->mac_addr, resp->perm_mac_address, ETH_ALEN);
+ memcpy(pf->mac_addr, resp->mac_address, ETH_ALEN);
memcpy(bp->dev->dev_addr, pf->mac_addr, ETH_ALEN);
pf->max_rsscos_ctxs = le16_to_cpu(resp->max_rsscos_ctx);
pf->max_cp_rings = le16_to_cpu(resp->max_cmpl_rings);
@@ -3751,7 +3751,7 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
struct bnxt_vf_info *vf = &bp->vf;
vf->fw_fid = le16_to_cpu(resp->fid);
- memcpy(vf->mac_addr, resp->perm_mac_address, ETH_ALEN);
+ memcpy(vf->mac_addr, resp->mac_address, ETH_ALEN);
if (is_valid_ether_addr(vf->mac_addr))
/* overwrite netdev dev_adr with admin VF MAC */
memcpy(bp->dev->dev_addr, vf->mac_addr, ETH_ALEN);
@@ -3842,6 +3842,8 @@ static int bnxt_hwrm_ver_get(struct bnxt *bp)
memcpy(&bp->ver_resp, resp, sizeof(struct hwrm_ver_get_output));
+ bp->hwrm_spec_code = resp->hwrm_intf_maj << 16 |
+ resp->hwrm_intf_min << 8 | resp->hwrm_intf_upd;
if (resp->hwrm_intf_maj < 1) {
netdev_warn(bp->dev, "HWRM interface %d.%d.%d is older than 1.0.0.\n",
resp->hwrm_intf_maj, resp->hwrm_intf_min,
@@ -4523,7 +4525,6 @@ static int bnxt_update_link(struct bnxt *bp, bool chng_link_state)
else
link_info->link_speed = 0;
link_info->force_link_speed = le16_to_cpu(resp->force_link_speed);
- link_info->auto_link_speed = le16_to_cpu(resp->auto_link_speed);
link_info->support_speeds = le16_to_cpu(resp->support_speeds);
link_info->auto_link_speeds = le16_to_cpu(resp->auto_link_speed_mask);
link_info->lp_auto_link_speeds =
@@ -4533,8 +4534,8 @@ static int bnxt_update_link(struct bnxt *bp, bool chng_link_state)
link_info->phy_ver[1] = resp->phy_min;
link_info->phy_ver[2] = resp->phy_bld;
link_info->media_type = resp->media_type;
- link_info->transceiver = resp->transceiver_type;
- link_info->phy_addr = resp->phy_addr;
+ link_info->transceiver = resp->xcvr_pkg_type;
+ link_info->phy_addr = resp->eee_config_phy_addr;
/* TODO: need to add more logic to report VF link */
if (chng_link_state) {
@@ -4581,7 +4582,7 @@ static void bnxt_hwrm_set_link_common(struct bnxt *bp,
if (autoneg & BNXT_AUTONEG_SPEED) {
req->auto_mode |=
- PORT_PHY_CFG_REQ_AUTO_MODE_MASK;
+ PORT_PHY_CFG_REQ_AUTO_MODE_SPEED_MASK;
req->enables |= cpu_to_le32(
PORT_PHY_CFG_REQ_ENABLES_AUTO_LINK_SPEED_MASK);
@@ -4595,9 +4596,6 @@ static void bnxt_hwrm_set_link_common(struct bnxt *bp,
req->flags |= cpu_to_le32(PORT_PHY_CFG_REQ_FLAGS_FORCE);
}
- /* currently don't support half duplex */
- req->auto_duplex = PORT_PHY_CFG_REQ_AUTO_DUPLEX_FULL;
- req->enables |= cpu_to_le32(PORT_PHY_CFG_REQ_ENABLES_AUTO_DUPLEX);
/* tell chimp that the setting takes effect immediately */
req->flags |= cpu_to_le32(PORT_PHY_CFG_REQ_FLAGS_RESET_PHY);
}
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 709b95b..e98c37a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1,6 +1,6 @@
/* Broadcom NetXtreme-C/E network driver.
*
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -11,7 +11,7 @@
#define BNXT_H
#define DRV_MODULE_NAME "bnxt_en"
-#define DRV_MODULE_VERSION "1.0.0"
+#define DRV_MODULE_VERSION "1.2.0"
#define DRV_VER_MAJ 1
#define DRV_VER_MIN 0
@@ -788,7 +788,7 @@ struct bnxt_link_info {
#define BNXT_LINK_AUTO_ALLSPDS PORT_PHY_QCFG_RESP_AUTO_MODE_ALL_SPEEDS
#define BNXT_LINK_AUTO_ONESPD PORT_PHY_QCFG_RESP_AUTO_MODE_ONE_SPEED
#define BNXT_LINK_AUTO_ONEORBELOW PORT_PHY_QCFG_RESP_AUTO_MODE_ONE_OR_BELOW
-#define BNXT_LINK_AUTO_MSK PORT_PHY_QCFG_RESP_AUTO_MODE_MASK
+#define BNXT_LINK_AUTO_MSK PORT_PHY_QCFG_RESP_AUTO_MODE_SPEED_MASK
#define PHY_VER_LEN 3
u8 phy_ver[PHY_VER_LEN];
u16 link_speed;
@@ -813,7 +813,6 @@ struct bnxt_link_info {
#define BNXT_LINK_SPEED_MSK_40GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_40GB
#define BNXT_LINK_SPEED_MSK_50GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_50GB
u16 lp_auto_link_speeds;
- u16 auto_link_speed;
u16 force_link_speed;
u32 preemphasis;
@@ -940,6 +939,7 @@ struct bnxt {
u32 msg_enable;
+ u32 hwrm_spec_code;
u16 hwrm_cmd_seq;
u32 hwrm_intr_seq_id;
void *hwrm_cmd_resp_addr;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 2e472f6..f103f9b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -1,6 +1,6 @@
/* Broadcom NetXtreme-C/E network driver.
*
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -728,7 +728,7 @@ static int bnxt_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
ethtool_speed = bnxt_fw_to_ethtool_speed(link_info->link_speed);
ethtool_cmd_speed_set(cmd, ethtool_speed);
if (link_info->transceiver ==
- PORT_PHY_QCFG_RESP_TRANSCEIVER_TYPE_XCVR_INTERNAL)
+ PORT_PHY_QCFG_RESP_XCVR_PKG_TYPE_XCVR_INTERNAL)
cmd->transceiver = XCVR_INTERNAL;
else
cmd->transceiver = XCVR_EXTERNAL;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
index 98fa81e..b2d8bd3 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
@@ -1,6 +1,6 @@
/* Broadcom NetXtreme-C/E network driver.
*
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_fw_hdr.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_fw_hdr.h
index e0aac65..461675c 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_fw_hdr.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_fw_hdr.h
@@ -1,6 +1,6 @@
/* Broadcom NetXtreme-C/E network driver.
*
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h
index 4badbed..80f9556 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h
@@ -1,6 +1,6 @@
/* Broadcom NetXtreme-C/E network driver.
*
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -104,6 +104,7 @@ struct hwrm_async_event_cmpl {
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE (0x3UL << 0)
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED (0x4UL << 0)
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED (0x5UL << 0)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE (0x6UL << 0)
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD (0x10UL << 0)
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD (0x11UL << 0)
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD (0x20UL << 0)
@@ -111,6 +112,7 @@ struct hwrm_async_event_cmpl {
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR (0x30UL << 0)
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE (0x31UL << 0)
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE (0x32UL << 0)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE (0x33UL << 0)
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR (0xffUL << 0)
__le32 event_data2;
u8 opaque_v;
@@ -141,6 +143,7 @@ struct hwrm_async_event_cmpl_link_status_change {
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE 0x1UL
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_DOWN (0x0UL << 0)
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP (0x1UL << 0)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_LAST HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_MASK 0xeUL
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_SFT 1
#define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_MASK 0xffff0UL
@@ -195,6 +198,9 @@ struct hwrm_async_event_cmpl_link_speed_change {
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_25GB (0xfaUL << 1)
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_40GB (0x190UL << 1)
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_50GB (0x1f4UL << 1)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100GB (0x3e8UL << 1)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_10MB (0xffffUL << 1)
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_LAST HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_10MB
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_MASK 0xffff0000UL
#define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_SFT 16
};
@@ -237,6 +243,55 @@ struct hwrm_async_event_cmpl_port_conn_not_allowed {
__le32 event_data1;
#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK 0xffffUL
#define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT 0
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_MASK 0xff0000UL
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_SFT 16
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_NONE (0x0UL << 16)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_DISABLETX (0x1UL << 16)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_WARNINGMSG (0x2UL << 16)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN (0x3UL << 16)
+ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_LAST HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN
+};
+
+/* HWRM Asynchronous Event Completion Record for link speed config not allowed (16 bytes) */
+struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed {
+ __le16 type;
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_MASK 0x3fUL
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_SFT 0
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT (0x2eUL << 0)
+ __le16 event_id;
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED (0x5UL << 0)
+ __le32 event_data2;
+ u8 opaque_v;
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_V 0x1UL
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_MASK 0xfeUL
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_SFT 1
+ u8 timestamp_lo;
+ __le16 timestamp_hi;
+ __le32 event_data1;
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK 0xffffUL
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT 0
+};
+
+/* HWRM Asynchronous Event Completion Record for link speed configuration change (16 bytes) */
+struct hwrm_async_event_cmpl_link_speed_cfg_change {
+ __le16 type;
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_MASK 0x3fUL
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_SFT 0
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT (0x2eUL << 0)
+ __le16 event_id;
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE (0x6UL << 0)
+ __le32 event_data2;
+ u8 opaque_v;
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_V 0x1UL
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_MASK 0xfeUL
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_SFT 1
+ u8 timestamp_lo;
+ __le16 timestamp_hi;
+ __le32 event_data1;
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK 0xffffUL
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT 0
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_SUPPORTED_LINK_SPEEDS_CHANGE 0x10000UL
+ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_ILLEGAL_LINK_SPEED_CFG 0x20000UL
};
/* HWRM Asynchronous Event Completion Record for Function Driver Unload (16 bytes) */
@@ -363,6 +418,47 @@ struct hwrm_async_event_cmpl_vf_mac_addr_change {
#define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_SFT 0
};
+/* HWRM Asynchronous Event Completion Record for PF-VF communication status change (16 bytes) */
+struct hwrm_async_event_cmpl_pf_vf_comm_status_change {
+ __le16 type;
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_MASK 0x3fUL
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_SFT 0
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT (0x2eUL << 0)
+ __le16 event_id;
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE (0x32UL << 0)
+ __le32 event_data2;
+ u8 opaque_v;
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_V 0x1UL
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_MASK 0xfeUL
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_SFT 1
+ u8 timestamp_lo;
+ __le16 timestamp_hi;
+ __le32 event_data1;
+ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_DATA1_COMM_ESTABLISHED 0x1UL
+};
+
+/* HWRM Asynchronous Event Completion Record for VF configuration change (16 bytes) */
+struct hwrm_async_event_cmpl_vf_cfg_change {
+ __le16 type;
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK 0x3fUL
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_SFT 0
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT (0x2eUL << 0)
+ __le16 event_id;
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE (0x33UL << 0)
+ __le32 event_data2;
+ u8 opaque_v;
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V 0x1UL
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_MASK 0xfeUL
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_SFT 1
+ u8 timestamp_lo;
+ __le16 timestamp_hi;
+ __le32 event_data1;
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MTU_CHANGE 0x1UL
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MRU_CHANGE 0x2UL
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_MAC_ADDR_CHANGE 0x4UL
+ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_VLAN_CHANGE 0x8UL
+};
+
/* HWRM Asynchronous Event Completion Record for HWRM Error (16 bytes) */
struct hwrm_async_event_cmpl_hwrm_error {
__le16 type;
@@ -377,6 +473,7 @@ struct hwrm_async_event_cmpl_hwrm_error {
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING (0x0UL << 0)
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL (0x1UL << 0)
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL (0x2UL << 0)
+ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL
u8 opaque_v;
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V 0x1UL
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK 0xfeUL
@@ -387,12 +484,12 @@ struct hwrm_async_event_cmpl_hwrm_error {
#define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP 0x1UL
};
-/* HW Resource Manager Specification 1.0.0 */
+/* HW Resource Manager Specification 1.2.2 */
#define HWRM_VERSION_MAJOR 1
-#define HWRM_VERSION_MINOR 0
-#define HWRM_VERSION_UPDATE 0
+#define HWRM_VERSION_MINOR 2
+#define HWRM_VERSION_UPDATE 2
-#define HWRM_VERSION_STR "1.0.0"
+#define HWRM_VERSION_STR "1.2.2"
/*
* Following is the signature for HWRM message field that indicates not
* applicable (All F's). Need to cast it the size of the field if needed.
@@ -444,7 +541,7 @@ struct cmd_nums {
#define HWRM_FUNC_BUF_RGTR (0x1fUL)
#define HWRM_PORT_PHY_CFG (0x20UL)
#define HWRM_PORT_MAC_CFG (0x21UL)
- #define RESERVED2 (0x22UL)
+ #define HWRM_PORT_TS_QUERY (0x22UL)
#define HWRM_PORT_QSTATS (0x23UL)
#define HWRM_PORT_LPBK_QSTATS (0x24UL)
#define HWRM_PORT_CLR_STATS (0x25UL)
@@ -452,6 +549,9 @@ struct cmd_nums {
#define HWRM_PORT_PHY_QCFG (0x27UL)
#define HWRM_PORT_MAC_QCFG (0x28UL)
#define HWRM_PORT_BLINK_LED (0x29UL)
+ #define HWRM_PORT_PHY_QCAPS (0x2aUL)
+ #define HWRM_PORT_PHY_I2C_WRITE (0x2bUL)
+ #define HWRM_PORT_PHY_I2C_READ (0x2cUL)
#define HWRM_QUEUE_QPORTCFG (0x30UL)
#define HWRM_QUEUE_QCFG (0x31UL)
#define HWRM_QUEUE_CFG (0x32UL)
@@ -531,6 +631,7 @@ struct cmd_nums {
__le16 unused_0[3];
};
+/* Return Codes (8 bytes) */
struct ret_codes {
__le16 error_code;
#define HWRM_ERR_CODE_SUCCESS (0x0UL)
@@ -875,10 +976,11 @@ struct hwrm_func_vf_cfg_input {
#define FUNC_VF_CFG_REQ_ENABLES_MTU 0x1UL
#define FUNC_VF_CFG_REQ_ENABLES_GUEST_VLAN 0x2UL
#define FUNC_VF_CFG_REQ_ENABLES_ASYNC_EVENT_CR 0x4UL
+ #define FUNC_VF_CFG_REQ_ENABLES_DFLT_MAC_ADDR 0x8UL
__le16 mtu;
__le16 guest_vlan;
__le16 async_event_cr;
- __le16 unused_0[3];
+ u8 dflt_mac_addr[6];
};
/* Output (16 bytes) */
@@ -917,7 +1019,8 @@ struct hwrm_func_qcaps_output {
__le32 flags;
#define FUNC_QCAPS_RESP_FLAGS_PUSH_MODE_SUPPORTED 0x1UL
#define FUNC_QCAPS_RESP_FLAGS_GLOBAL_MSIX_AUTOMASKING 0x2UL
- u8 perm_mac_address[6];
+ #define FUNC_QCAPS_RESP_FLAGS_PTP_SUPPORTED 0x4UL
+ u8 mac_address[6];
__le16 max_rsscos_ctx;
__le16 max_cmpl_rings;
__le16 max_tx_rings;
@@ -942,6 +1045,67 @@ struct hwrm_func_qcaps_output {
u8 valid;
};
+/* hwrm_func_qcfg */
+/* Input (24 bytes) */
+struct hwrm_func_qcfg_input {
+ __le16 req_type;
+ __le16 cmpl_ring;
+ __le16 seq_id;
+ __le16 target_id;
+ __le64 resp_addr;
+ __le16 fid;
+ __le16 unused_0[3];
+};
+
+/* Output (72 bytes) */
+struct hwrm_func_qcfg_output {
+ __le16 error_code;
+ __le16 req_type;
+ __le16 seq_id;
+ __le16 resp_len;
+ __le16 fid;
+ __le16 port_id;
+ __le16 vlan;
+ u8 unused_0;
+ u8 unused_1;
+ u8 mac_address[6];
+ __le16 pci_id;
+ __le16 alloc_rsscos_ctx;
+ __le16 alloc_cmpl_rings;
+ __le16 alloc_tx_rings;
+ __le16 alloc_rx_rings;
+ __le16 alloc_l2_ctx;
+ __le16 alloc_vnics;
+ __le16 mtu;
+ __le16 mru;
+ __le16 stat_ctx_id;
+ u8 port_partition_type;
+ #define FUNC_QCFG_RESP_PORT_PARTITION_TYPE_SPF (0x0UL << 0)
+ #define FUNC_QCFG_RESP_PORT_PARTITION_TYPE_MPFS (0x1UL << 0)
+ #define FUNC_QCFG_RESP_PORT_PARTITION_TYPE_NPAR1_0 (0x2UL << 0)
+ #define FUNC_QCFG_RESP_PORT_PARTITION_TYPE_NPAR1_5 (0x3UL << 0)
+ #define FUNC_QCFG_RESP_PORT_PARTITION_TYPE_NPAR2_0 (0x4UL << 0)
+ #define FUNC_QCFG_RESP_PORT_PARTITION_TYPE_UNKNOWN (0xffUL << 0)
+ u8 unused_2;
+ __le16 dflt_vnic_id;
+ u8 unused_3;
+ u8 unused_4;
+ __le32 min_bw;
+ __le32 max_bw;
+ u8 evb_mode;
+ #define FUNC_QCFG_RESP_EVB_MODE_NO_EVB (0x0UL << 0)
+ #define FUNC_QCFG_RESP_EVB_MODE_VEB (0x1UL << 0)
+ #define FUNC_QCFG_RESP_EVB_MODE_VEPA (0x2UL << 0)
+ u8 unused_5;
+ __le16 unused_6;
+ __le32 alloc_mcast_filters;
+ __le32 alloc_hw_ring_grps;
+ u8 unused_7;
+ u8 unused_8;
+ u8 unused_9;
+ u8 valid;
+};
+
/* hwrm_func_cfg */
/* Input (88 bytes) */
struct hwrm_func_cfg_input {
@@ -1171,6 +1335,7 @@ struct hwrm_func_drv_rgtr_input {
#define FUNC_DRV_RGTR_REQ_OS_TYPE_UNKNOWN (0x0UL << 0)
#define FUNC_DRV_RGTR_REQ_OS_TYPE_OTHER (0x1UL << 0)
#define FUNC_DRV_RGTR_REQ_OS_TYPE_MSDOS (0xeUL << 0)
+ #define FUNC_DRV_RGTR_REQ_OS_TYPE_WINDOWS (0x12UL << 0)
#define FUNC_DRV_RGTR_REQ_OS_TYPE_SOLARIS (0x1dUL << 0)
#define FUNC_DRV_RGTR_REQ_OS_TYPE_LINUX (0x24UL << 0)
#define FUNC_DRV_RGTR_REQ_OS_TYPE_FREEBSD (0x2aUL << 0)
@@ -1302,6 +1467,7 @@ struct hwrm_func_drv_qver_output {
#define FUNC_DRV_QVER_RESP_OS_TYPE_UNKNOWN (0x0UL << 0)
#define FUNC_DRV_QVER_RESP_OS_TYPE_OTHER (0x1UL << 0)
#define FUNC_DRV_QVER_RESP_OS_TYPE_MSDOS (0xeUL << 0)
+ #define FUNC_DRV_QVER_RESP_OS_TYPE_WINDOWS (0x12UL << 0)
#define FUNC_DRV_QVER_RESP_OS_TYPE_SOLARIS (0x1dUL << 0)
#define FUNC_DRV_QVER_RESP_OS_TYPE_LINUX (0x24UL << 0)
#define FUNC_DRV_QVER_RESP_OS_TYPE_FREEBSD (0x2aUL << 0)
@@ -1317,7 +1483,7 @@ struct hwrm_func_drv_qver_output {
};
/* hwrm_port_phy_cfg */
-/* Input (48 bytes) */
+/* Input (56 bytes) */
struct hwrm_port_phy_cfg_input {
__le16 req_type;
__le16 cmpl_ring;
@@ -1329,6 +1495,10 @@ struct hwrm_port_phy_cfg_input {
#define PORT_PHY_CFG_REQ_FLAGS_FORCE_LINK_DOWN 0x2UL
#define PORT_PHY_CFG_REQ_FLAGS_FORCE 0x4UL
#define PORT_PHY_CFG_REQ_FLAGS_RESTART_AUTONEG 0x8UL
+ #define PORT_PHY_CFG_REQ_FLAGS_EEE_ENABLE 0x10UL
+ #define PORT_PHY_CFG_REQ_FLAGS_EEE_DISABLE 0x20UL
+ #define PORT_PHY_CFG_REQ_FLAGS_EEE_TX_LPI_ENABLE 0x40UL
+ #define PORT_PHY_CFG_REQ_FLAGS_EEE_TX_LPI_DISABLE 0x80UL
__le32 enables;
#define PORT_PHY_CFG_REQ_ENABLES_AUTO_MODE 0x1UL
#define PORT_PHY_CFG_REQ_ENABLES_AUTO_DUPLEX 0x2UL
@@ -1339,6 +1509,8 @@ struct hwrm_port_phy_cfg_input {
#define PORT_PHY_CFG_REQ_ENABLES_LPBK 0x40UL
#define PORT_PHY_CFG_REQ_ENABLES_PREEMPHASIS 0x80UL
#define PORT_PHY_CFG_REQ_ENABLES_FORCE_PAUSE 0x100UL
+ #define PORT_PHY_CFG_REQ_ENABLES_EEE_LINK_SPEED_MASK 0x200UL
+ #define PORT_PHY_CFG_REQ_ENABLES_TX_LPI_TIMER 0x400UL
__le16 port_id;
__le16 force_link_speed;
#define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_100MB (0x1UL << 0)
@@ -1350,12 +1522,14 @@ struct hwrm_port_phy_cfg_input {
#define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_25GB (0xfaUL << 0)
#define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_40GB (0x190UL << 0)
#define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_50GB (0x1f4UL << 0)
+ #define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_100GB (0x3e8UL << 0)
+ #define PORT_PHY_CFG_REQ_FORCE_LINK_SPEED_10MB (0xffffUL << 0)
u8 auto_mode;
#define PORT_PHY_CFG_REQ_AUTO_MODE_NONE (0x0UL << 0)
#define PORT_PHY_CFG_REQ_AUTO_MODE_ALL_SPEEDS (0x1UL << 0)
#define PORT_PHY_CFG_REQ_AUTO_MODE_ONE_SPEED (0x2UL << 0)
#define PORT_PHY_CFG_REQ_AUTO_MODE_ONE_OR_BELOW (0x3UL << 0)
- #define PORT_PHY_CFG_REQ_AUTO_MODE_MASK (0x4UL << 0)
+ #define PORT_PHY_CFG_REQ_AUTO_MODE_SPEED_MASK (0x4UL << 0)
u8 auto_duplex;
#define PORT_PHY_CFG_REQ_AUTO_DUPLEX_HALF (0x0UL << 0)
#define PORT_PHY_CFG_REQ_AUTO_DUPLEX_FULL (0x1UL << 0)
@@ -1363,6 +1537,7 @@ struct hwrm_port_phy_cfg_input {
u8 auto_pause;
#define PORT_PHY_CFG_REQ_AUTO_PAUSE_TX 0x1UL
#define PORT_PHY_CFG_REQ_AUTO_PAUSE_RX 0x2UL
+ #define PORT_PHY_CFG_REQ_AUTO_PAUSE_AUTONEG_PAUSE 0x4UL
u8 unused_0;
__le16 auto_link_speed;
#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_100MB (0x1UL << 0)
@@ -1374,6 +1549,8 @@ struct hwrm_port_phy_cfg_input {
#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_25GB (0xfaUL << 0)
#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_40GB (0x190UL << 0)
#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_50GB (0x1f4UL << 0)
+ #define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_100GB (0x3e8UL << 0)
+ #define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_10MB (0xffffUL << 0)
__le16 auto_link_speed_mask;
#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_100MBHD 0x1UL
#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_100MB 0x2UL
@@ -1386,6 +1563,9 @@ struct hwrm_port_phy_cfg_input {
#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_25GB 0x100UL
#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_40GB 0x200UL
#define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_50GB 0x400UL
+ #define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_100GB 0x800UL
+ #define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_10MBHD 0x1000UL
+ #define PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_MASK_10MB 0x2000UL
u8 wirespeed;
#define PORT_PHY_CFG_REQ_WIRESPEED_OFF (0x0UL << 0)
#define PORT_PHY_CFG_REQ_WIRESPEED_ON (0x1UL << 0)
@@ -1398,7 +1578,20 @@ struct hwrm_port_phy_cfg_input {
#define PORT_PHY_CFG_REQ_FORCE_PAUSE_RX 0x2UL
u8 unused_1;
__le32 preemphasis;
- __le32 unused_2;
+ __le16 eee_link_speed_mask;
+ #define PORT_PHY_CFG_REQ_EEE_LINK_SPEED_MASK_RSVD1 0x1UL
+ #define PORT_PHY_CFG_REQ_EEE_LINK_SPEED_MASK_100MB 0x2UL
+ #define PORT_PHY_CFG_REQ_EEE_LINK_SPEED_MASK_RSVD2 0x4UL
+ #define PORT_PHY_CFG_REQ_EEE_LINK_SPEED_MASK_1GB 0x8UL
+ #define PORT_PHY_CFG_REQ_EEE_LINK_SPEED_MASK_RSVD3 0x10UL
+ #define PORT_PHY_CFG_REQ_EEE_LINK_SPEED_MASK_RSVD4 0x20UL
+ #define PORT_PHY_CFG_REQ_EEE_LINK_SPEED_MASK_10GB 0x40UL
+ u8 unused_2;
+ u8 unused_3;
+ __le32 tx_lpi_timer;
+ __le32 unused_4;
+ #define PORT_PHY_CFG_REQ_TX_LPI_TIMER_MASK 0xffffffUL
+ #define PORT_PHY_CFG_REQ_TX_LPI_TIMER_SFT 0
};
/* Output (16 bytes) */
@@ -1426,7 +1619,7 @@ struct hwrm_port_phy_qcfg_input {
__le16 unused_0[3];
};
-/* Output (48 bytes) */
+/* Output (96 bytes) */
struct hwrm_port_phy_qcfg_output {
__le16 error_code;
__le16 req_type;
@@ -1447,6 +1640,8 @@ struct hwrm_port_phy_qcfg_output {
#define PORT_PHY_QCFG_RESP_LINK_SPEED_25GB (0xfaUL << 0)
#define PORT_PHY_QCFG_RESP_LINK_SPEED_40GB (0x190UL << 0)
#define PORT_PHY_QCFG_RESP_LINK_SPEED_50GB (0x1f4UL << 0)
+ #define PORT_PHY_QCFG_RESP_LINK_SPEED_100GB (0x3e8UL << 0)
+ #define PORT_PHY_QCFG_RESP_LINK_SPEED_10MB (0xffffUL << 0)
u8 duplex;
#define PORT_PHY_QCFG_RESP_DUPLEX_HALF (0x0UL << 0)
#define PORT_PHY_QCFG_RESP_DUPLEX_FULL (0x1UL << 0)
@@ -1465,6 +1660,9 @@ struct hwrm_port_phy_qcfg_output {
#define PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_25GB 0x100UL
#define PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_40GB 0x200UL
#define PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_50GB 0x400UL
+ #define PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_100GB 0x800UL
+ #define PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_10MBHD 0x1000UL
+ #define PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_10MB 0x2000UL
__le16 force_link_speed;
#define PORT_PHY_QCFG_RESP_FORCE_LINK_SPEED_100MB (0x1UL << 0)
#define PORT_PHY_QCFG_RESP_FORCE_LINK_SPEED_1GB (0xaUL << 0)
@@ -1475,15 +1673,18 @@ struct hwrm_port_phy_qcfg_output {
#define PORT_PHY_QCFG_RESP_FORCE_LINK_SPEED_25GB (0xfaUL << 0)
#define PORT_PHY_QCFG_RESP_FORCE_LINK_SPEED_40GB (0x190UL << 0)
#define PORT_PHY_QCFG_RESP_FORCE_LINK_SPEED_50GB (0x1f4UL << 0)
+ #define PORT_PHY_QCFG_RESP_FORCE_LINK_SPEED_100GB (0x3e8UL << 0)
+ #define PORT_PHY_QCFG_RESP_FORCE_LINK_SPEED_10MB (0xffffUL << 0)
u8 auto_mode;
#define PORT_PHY_QCFG_RESP_AUTO_MODE_NONE (0x0UL << 0)
#define PORT_PHY_QCFG_RESP_AUTO_MODE_ALL_SPEEDS (0x1UL << 0)
#define PORT_PHY_QCFG_RESP_AUTO_MODE_ONE_SPEED (0x2UL << 0)
#define PORT_PHY_QCFG_RESP_AUTO_MODE_ONE_OR_BELOW (0x3UL << 0)
- #define PORT_PHY_QCFG_RESP_AUTO_MODE_MASK (0x4UL << 0)
+ #define PORT_PHY_QCFG_RESP_AUTO_MODE_SPEED_MASK (0x4UL << 0)
u8 auto_pause;
#define PORT_PHY_QCFG_RESP_AUTO_PAUSE_TX 0x1UL
#define PORT_PHY_QCFG_RESP_AUTO_PAUSE_RX 0x2UL
+ #define PORT_PHY_QCFG_RESP_AUTO_PAUSE_AUTONEG_PAUSE 0x4UL
__le16 auto_link_speed;
#define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_100MB (0x1UL << 0)
#define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_1GB (0xaUL << 0)
@@ -1494,6 +1695,8 @@ struct hwrm_port_phy_qcfg_output {
#define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_25GB (0xfaUL << 0)
#define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_40GB (0x190UL << 0)
#define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_50GB (0x1f4UL << 0)
+ #define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_100GB (0x3e8UL << 0)
+ #define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_10MB (0xffffUL << 0)
__le16 auto_link_speed_mask;
#define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_MASK_100MBHD 0x1UL
#define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_MASK_100MB 0x2UL
@@ -1506,6 +1709,9 @@ struct hwrm_port_phy_qcfg_output {
#define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_MASK_25GB 0x100UL
#define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_MASK_40GB 0x200UL
#define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_MASK_50GB 0x400UL
+ #define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_MASK_100GB 0x800UL
+ #define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_MASK_10MBHD 0x1000UL
+ #define PORT_PHY_QCFG_RESP_AUTO_LINK_SPEED_MASK_10MB 0x2000UL
u8 wirespeed;
#define PORT_PHY_QCFG_RESP_WIRESPEED_OFF (0x0UL << 0)
#define PORT_PHY_QCFG_RESP_WIRESPEED_ON (0x1UL << 0)
@@ -1516,31 +1722,49 @@ struct hwrm_port_phy_qcfg_output {
u8 force_pause;
#define PORT_PHY_QCFG_RESP_FORCE_PAUSE_TX 0x1UL
#define PORT_PHY_QCFG_RESP_FORCE_PAUSE_RX 0x2UL
- u8 reserved1;
+ u8 module_status;
+ #define PORT_PHY_QCFG_RESP_MODULE_STATUS_NONE (0x0UL << 0)
+ #define PORT_PHY_QCFG_RESP_MODULE_STATUS_DISABLETX (0x1UL << 0)
+ #define PORT_PHY_QCFG_RESP_MODULE_STATUS_WARNINGMSG (0x2UL << 0)
+ #define PORT_PHY_QCFG_RESP_MODULE_STATUS_PWRDOWN (0x3UL << 0)
+ #define PORT_PHY_QCFG_RESP_MODULE_STATUS_NOTINSERTED (0x4UL << 0)
+ #define PORT_PHY_QCFG_RESP_MODULE_STATUS_NOTAPPLICABLE (0xffUL << 0)
__le32 preemphasis;
u8 phy_maj;
u8 phy_min;
u8 phy_bld;
u8 phy_type;
- #define PORT_PHY_QCFG_RESP_PHY_TYPE_BASECR4 (0x1UL << 0)
+ #define PORT_PHY_QCFG_RESP_PHY_TYPE_UNKNOWN (0x0UL << 0)
+ #define PORT_PHY_QCFG_RESP_PHY_TYPE_BASECR (0x1UL << 0)
#define PORT_PHY_QCFG_RESP_PHY_TYPE_BASEKR4 (0x2UL << 0)
- #define PORT_PHY_QCFG_RESP_PHY_TYPE_BASELR4 (0x3UL << 0)
- #define PORT_PHY_QCFG_RESP_PHY_TYPE_BASESR4 (0x4UL << 0)
+ #define PORT_PHY_QCFG_RESP_PHY_TYPE_BASELR (0x3UL << 0)
+ #define PORT_PHY_QCFG_RESP_PHY_TYPE_BASESR (0x4UL << 0)
#define PORT_PHY_QCFG_RESP_PHY_TYPE_BASEKR2 (0x5UL << 0)
- #define PORT_PHY_QCFG_RESP_PHY_TYPE_BASEKX4 (0x6UL << 0)
+ #define PORT_PHY_QCFG_RESP_PHY_TYPE_BASEKX (0x6UL << 0)
#define PORT_PHY_QCFG_RESP_PHY_TYPE_BASEKR (0x7UL << 0)
#define PORT_PHY_QCFG_RESP_PHY_TYPE_BASET (0x8UL << 0)
+ #define PORT_PHY_QCFG_RESP_PHY_TYPE_BASETE (0x9UL << 0)
+ #define PORT_PHY_QCFG_RESP_PHY_TYPE_SGMIIEXTPHY (0xaUL << 0)
u8 media_type;
+ #define PORT_PHY_QCFG_RESP_MEDIA_TYPE_UNKNOWN (0x0UL << 0)
#define PORT_PHY_QCFG_RESP_MEDIA_TYPE_TP (0x1UL << 0)
#define PORT_PHY_QCFG_RESP_MEDIA_TYPE_DAC (0x2UL << 0)
#define PORT_PHY_QCFG_RESP_MEDIA_TYPE_FIBRE (0x3UL << 0)
- u8 transceiver_type;
- #define PORT_PHY_QCFG_RESP_TRANSCEIVER_TYPE_XCVR_INTERNAL (0x1UL << 0)
- #define PORT_PHY_QCFG_RESP_TRANSCEIVER_TYPE_XCVR_EXTERNAL (0x2UL << 0)
- u8 phy_addr;
+ u8 xcvr_pkg_type;
+ #define PORT_PHY_QCFG_RESP_XCVR_PKG_TYPE_XCVR_INTERNAL (0x1UL << 0)
+ #define PORT_PHY_QCFG_RESP_XCVR_PKG_TYPE_XCVR_EXTERNAL (0x2UL << 0)
+ u8 eee_config_phy_addr;
#define PORT_PHY_QCFG_RESP_PHY_ADDR_MASK 0x1fUL
#define PORT_PHY_QCFG_RESP_PHY_ADDR_SFT 0
- u8 unused_2;
+ #define PORT_PHY_QCFG_RESP_EEE_CONFIG_EEE_ENABLED 0x20UL
+ #define PORT_PHY_QCFG_RESP_EEE_CONFIG_EEE_ACTIVE 0x40UL
+ #define PORT_PHY_QCFG_RESP_EEE_CONFIG_EEE_TX_LPI 0x80UL
+ #define PORT_PHY_QCFG_RESP_EEE_CONFIG_MASK 0xe0UL
+ #define PORT_PHY_QCFG_RESP_EEE_CONFIG_SFT 5
+ u8 parallel_detect;
+ #define PORT_PHY_QCFG_RESP_PARALLEL_DETECT 0x1UL
+ #define PORT_PHY_QCFG_RESP_RESERVED_MASK 0xfeUL
+ #define PORT_PHY_QCFG_RESP_RESERVED_SFT 1
__le16 link_partner_adv_speeds;
#define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_SPEEDS_100MBHD 0x1UL
#define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_SPEEDS_100MB 0x2UL
@@ -1553,15 +1777,48 @@ struct hwrm_port_phy_qcfg_output {
#define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_SPEEDS_25GB 0x100UL
#define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_SPEEDS_40GB 0x200UL
#define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_SPEEDS_50GB 0x400UL
+ #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_SPEEDS_100GB 0x800UL
+ #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_SPEEDS_10MBHD 0x1000UL
+ #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_SPEEDS_10MB 0x2000UL
u8 link_partner_adv_auto_mode;
#define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_AUTO_MODE_NONE (0x0UL << 0)
#define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS (0x1UL << 0)
#define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED (0x2UL << 0)
#define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW (0x3UL << 0)
- #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_AUTO_MODE_MASK (0x4UL << 0)
+ #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK (0x4UL << 0)
u8 link_partner_adv_pause;
#define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_PAUSE_TX 0x1UL
#define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_PAUSE_RX 0x2UL
+ __le16 adv_eee_link_speed_mask;
+ #define PORT_PHY_QCFG_RESP_ADV_EEE_LINK_SPEED_MASK_RSVD1 0x1UL
+ #define PORT_PHY_QCFG_RESP_ADV_EEE_LINK_SPEED_MASK_100MB 0x2UL
+ #define PORT_PHY_QCFG_RESP_ADV_EEE_LINK_SPEED_MASK_RSVD2 0x4UL
+ #define PORT_PHY_QCFG_RESP_ADV_EEE_LINK_SPEED_MASK_1GB 0x8UL
+ #define PORT_PHY_QCFG_RESP_ADV_EEE_LINK_SPEED_MASK_RSVD3 0x10UL
+ #define PORT_PHY_QCFG_RESP_ADV_EEE_LINK_SPEED_MASK_RSVD4 0x20UL
+ #define PORT_PHY_QCFG_RESP_ADV_EEE_LINK_SPEED_MASK_10GB 0x40UL
+ __le16 link_partner_adv_eee_link_speed_mask;
+ #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 0x1UL
+ #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB 0x2UL
+ #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 0x4UL
+ #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB 0x8UL
+ #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 0x10UL
+ #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 0x20UL
+ #define PORT_PHY_QCFG_RESP_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB 0x40UL
+ __le32 xcvr_identifier_type_tx_lpi_timer;
+ #define PORT_PHY_QCFG_RESP_TX_LPI_TIMER_MASK 0xffffffUL
+ #define PORT_PHY_QCFG_RESP_TX_LPI_TIMER_SFT 0
+ #define PORT_PHY_QCFG_RESP_XCVR_IDENTIFIER_TYPE_MASK 0xff000000UL
+ #define PORT_PHY_QCFG_RESP_XCVR_IDENTIFIER_TYPE_SFT 24
+ #define PORT_PHY_QCFG_RESP_XCVR_IDENTIFIER_TYPE_UNKNOWN (0x0UL << 24)
+ #define PORT_PHY_QCFG_RESP_XCVR_IDENTIFIER_TYPE_SFP (0x3UL << 24)
+ #define PORT_PHY_QCFG_RESP_XCVR_IDENTIFIER_TYPE_QSFP (0xcUL << 24)
+ #define PORT_PHY_QCFG_RESP_XCVR_IDENTIFIER_TYPE_QSFPPLUS (0xdUL << 24)
+ #define PORT_PHY_QCFG_RESP_XCVR_IDENTIFIER_TYPE_QSFP28 (0x11UL << 24)
+ __le32 unused_1;
+ char phy_vendor_name[16];
+ char phy_vendor_partnumber[16];
+ __le32 unused_2;
u8 unused_3;
u8 unused_4;
u8 unused_5;
@@ -1569,7 +1826,7 @@ struct hwrm_port_phy_qcfg_output {
};
/* hwrm_port_mac_cfg */
-/* Input (32 bytes) */
+/* Input (40 bytes) */
struct hwrm_port_mac_cfg_input {
__le16 req_type;
__le16 cmpl_ring;
@@ -1581,6 +1838,10 @@ struct hwrm_port_mac_cfg_input {
#define PORT_MAC_CFG_REQ_FLAGS_COS_ASSIGNMENT_ENABLE 0x2UL
#define PORT_MAC_CFG_REQ_FLAGS_TUNNEL_PRI2COS_ENABLE 0x4UL
#define PORT_MAC_CFG_REQ_FLAGS_IP_DSCP2COS_ENABLE 0x8UL
+ #define PORT_MAC_CFG_REQ_FLAGS_PTP_RX_TS_CAPTURE_ENABLE 0x10UL
+ #define PORT_MAC_CFG_REQ_FLAGS_PTP_RX_TS_CAPTURE_DISABLE 0x20UL
+ #define PORT_MAC_CFG_REQ_FLAGS_PTP_TX_TS_CAPTURE_ENABLE 0x40UL
+ #define PORT_MAC_CFG_REQ_FLAGS_PTP_TX_TS_CAPTURE_DISABLE 0x80UL
__le32 enables;
#define PORT_MAC_CFG_REQ_ENABLES_IPG 0x1UL
#define PORT_MAC_CFG_REQ_ENABLES_LPBK 0x2UL
@@ -1588,6 +1849,8 @@ struct hwrm_port_mac_cfg_input {
#define PORT_MAC_CFG_REQ_ENABLES_LCOS_MAP_PRI 0x8UL
#define PORT_MAC_CFG_REQ_ENABLES_TUNNEL_PRI2COS_MAP_PRI 0x10UL
#define PORT_MAC_CFG_REQ_ENABLES_DSCP2COS_MAP_PRI 0x20UL
+ #define PORT_MAC_CFG_REQ_ENABLES_RX_TS_CAPTURE_PTP_MSG_TYPE 0x40UL
+ #define PORT_MAC_CFG_REQ_ENABLES_TX_TS_CAPTURE_PTP_MSG_TYPE 0x80UL
__le16 port_id;
u8 ipg;
u8 lpbk;
@@ -1598,6 +1861,9 @@ struct hwrm_port_mac_cfg_input {
u8 lcos_map_pri;
u8 tunnel_pri2cos_map_pri;
u8 dscp2pri_map_pri;
+ __le16 rx_ts_capture_ptp_msg_type;
+ __le16 tx_ts_capture_ptp_msg_type;
+ __le32 unused_0;
};
/* Output (16 bytes) */
@@ -1754,7 +2020,79 @@ struct hwrm_port_blink_led_output {
u8 valid;
};
-/* hwrm_queue_qportcfg */
+/* hwrm_port_phy_qcaps */
+/* Input (24 bytes) */
+struct hwrm_port_phy_qcaps_input {
+ __le16 req_type;
+ __le16 cmpl_ring;
+ __le16 seq_id;
+ __le16 target_id;
+ __le64 resp_addr;
+ __le16 port_id;
+ __le16 unused_0[3];
+};
+
+/* Output (24 bytes) */
+struct hwrm_port_phy_qcaps_output {
+ __le16 error_code;
+ __le16 req_type;
+ __le16 seq_id;
+ __le16 resp_len;
+ u8 eee_supported;
+ #define PORT_PHY_QCAPS_RESP_EEE_SUPPORTED 0x1UL
+ #define PORT_PHY_QCAPS_RESP_RSVD1_MASK 0xfeUL
+ #define PORT_PHY_QCAPS_RESP_RSVD1_SFT 1
+ u8 unused_0;
+ __le16 supported_speeds_force_mode;
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_100MBHD 0x1UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_100MB 0x2UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_1GBHD 0x4UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_1GB 0x8UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_2GB 0x10UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_2_5GB 0x20UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_10GB 0x40UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_20GB 0x80UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_25GB 0x100UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_40GB 0x200UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_50GB 0x400UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_100GB 0x800UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_10MBHD 0x1000UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_FORCE_MODE_10MB 0x2000UL
+ __le16 supported_speeds_auto_mode;
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_100MBHD 0x1UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_100MB 0x2UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_1GBHD 0x4UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_1GB 0x8UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_2GB 0x10UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_2_5GB 0x20UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_10GB 0x40UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_20GB 0x80UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_25GB 0x100UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_40GB 0x200UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_50GB 0x400UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_100GB 0x800UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_10MBHD 0x1000UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_AUTO_MODE_10MB 0x2000UL
+ __le16 supported_speeds_eee_mode;
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_EEE_MODE_RSVD1 0x1UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_EEE_MODE_100MB 0x2UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_EEE_MODE_RSVD2 0x4UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_EEE_MODE_1GB 0x8UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_EEE_MODE_RSVD3 0x10UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_EEE_MODE_RSVD4 0x20UL
+ #define PORT_PHY_QCAPS_RESP_SUPPORTED_SPEEDS_EEE_MODE_10GB 0x40UL
+ __le32 tx_lpi_timer_low;
+ #define PORT_PHY_QCAPS_RESP_TX_LPI_TIMER_LOW_MASK 0xffffffUL
+ #define PORT_PHY_QCAPS_RESP_TX_LPI_TIMER_LOW_SFT 0
+ #define PORT_PHY_QCAPS_RESP_RSVD2_MASK 0xff000000UL
+ #define PORT_PHY_QCAPS_RESP_RSVD2_SFT 24
+ __le32 valid_tx_lpi_timer_high;
+ #define PORT_PHY_QCAPS_RESP_TX_LPI_TIMER_HIGH_MASK 0xffffffUL
+ #define PORT_PHY_QCAPS_RESP_TX_LPI_TIMER_HIGH_SFT 0
+ #define PORT_PHY_QCAPS_RESP_VALID_MASK 0xff000000UL
+ #define PORT_PHY_QCAPS_RESP_VALID_SFT 24
+};
+
/* Input (24 bytes) */
struct hwrm_queue_qportcfg_input {
__le16 req_type;
@@ -1766,6 +2104,7 @@ struct hwrm_queue_qportcfg_input {
#define QUEUE_QPORTCFG_REQ_FLAGS_PATH 0x1UL
#define QUEUE_QPORTCFG_REQ_FLAGS_PATH_TX (0x0UL << 0)
#define QUEUE_QPORTCFG_REQ_FLAGS_PATH_RX (0x1UL << 0)
+ #define QUEUE_QPORTCFG_REQ_FLAGS_PATH_LAST QUEUE_QPORTCFG_REQ_FLAGS_PATH_RX
__le16 port_id;
__le16 unused_0;
};
@@ -1838,6 +2177,7 @@ struct hwrm_queue_cfg_input {
#define QUEUE_CFG_REQ_FLAGS_PATH 0x1UL
#define QUEUE_CFG_REQ_FLAGS_PATH_TX (0x0UL << 0)
#define QUEUE_CFG_REQ_FLAGS_PATH_RX (0x1UL << 0)
+ #define QUEUE_CFG_REQ_FLAGS_PATH_LAST QUEUE_CFG_REQ_FLAGS_PATH_RX
__le32 enables;
#define QUEUE_CFG_REQ_ENABLES_DFLT_LEN 0x1UL
#define QUEUE_CFG_REQ_ENABLES_SERVICE_PROFILE 0x2UL
@@ -1875,6 +2215,7 @@ struct hwrm_queue_buffers_cfg_input {
#define QUEUE_BUFFERS_CFG_REQ_FLAGS_PATH 0x1UL
#define QUEUE_BUFFERS_CFG_REQ_FLAGS_PATH_TX (0x0UL << 0)
#define QUEUE_BUFFERS_CFG_REQ_FLAGS_PATH_RX (0x1UL << 0)
+ #define QUEUE_BUFFERS_CFG_REQ_FLAGS_PATH_LAST QUEUE_BUFFERS_CFG_REQ_FLAGS_PATH_RX
__le32 enables;
#define QUEUE_BUFFERS_CFG_REQ_ENABLES_RESERVED 0x1UL
#define QUEUE_BUFFERS_CFG_REQ_ENABLES_SHARED 0x2UL
@@ -1952,6 +2293,7 @@ struct hwrm_queue_pri2cos_cfg_input {
#define QUEUE_PRI2COS_CFG_REQ_FLAGS_PATH 0x1UL
#define QUEUE_PRI2COS_CFG_REQ_FLAGS_PATH_TX (0x0UL << 0)
#define QUEUE_PRI2COS_CFG_REQ_FLAGS_PATH_RX (0x1UL << 0)
+ #define QUEUE_PRI2COS_CFG_REQ_FLAGS_PATH_LAST QUEUE_PRI2COS_CFG_REQ_FLAGS_PATH_RX
#define QUEUE_PRI2COS_CFG_REQ_FLAGS_IVLAN 0x2UL
__le32 enables;
u8 port_id;
@@ -2158,6 +2500,8 @@ struct hwrm_vnic_cfg_input {
#define VNIC_CFG_REQ_FLAGS_DEFAULT 0x1UL
#define VNIC_CFG_REQ_FLAGS_VLAN_STRIP_MODE 0x2UL
#define VNIC_CFG_REQ_FLAGS_BD_STALL_MODE 0x4UL
+ #define VNIC_CFG_REQ_FLAGS_ROCE_DUAL_VNIC_MODE 0x8UL
+ #define VNIC_CFG_REQ_FLAGS_ROCE_ONLY_VNIC_MODE 0x10UL
__le32 enables;
#define VNIC_CFG_REQ_ENABLES_DFLT_RING_GRP 0x1UL
#define VNIC_CFG_REQ_ENABLES_RSS_RULE 0x2UL
@@ -2622,6 +2966,7 @@ struct hwrm_cfa_l2_filter_alloc_input {
#define CFA_L2_FILTER_ALLOC_REQ_FLAGS_PATH 0x1UL
#define CFA_L2_FILTER_ALLOC_REQ_FLAGS_PATH_TX (0x0UL << 0)
#define CFA_L2_FILTER_ALLOC_REQ_FLAGS_PATH_RX (0x1UL << 0)
+ #define CFA_L2_FILTER_ALLOC_REQ_FLAGS_PATH_LAST CFA_L2_FILTER_ALLOC_REQ_FLAGS_PATH_RX
#define CFA_L2_FILTER_ALLOC_REQ_FLAGS_LOOPBACK 0x2UL
#define CFA_L2_FILTER_ALLOC_REQ_FLAGS_DROP 0x4UL
#define CFA_L2_FILTER_ALLOC_REQ_FLAGS_OUTERMOST 0x8UL
@@ -2747,6 +3092,7 @@ struct hwrm_cfa_l2_filter_cfg_input {
#define CFA_L2_FILTER_CFG_REQ_FLAGS_PATH 0x1UL
#define CFA_L2_FILTER_CFG_REQ_FLAGS_PATH_TX (0x0UL << 0)
#define CFA_L2_FILTER_CFG_REQ_FLAGS_PATH_RX (0x1UL << 0)
+ #define CFA_L2_FILTER_CFG_REQ_FLAGS_PATH_LAST CFA_L2_FILTER_CFG_REQ_FLAGS_PATH_RX
#define CFA_L2_FILTER_CFG_REQ_FLAGS_DROP 0x2UL
__le32 enables;
#define CFA_L2_FILTER_CFG_REQ_ENABLES_DST_ID 0x1UL
@@ -3337,6 +3683,41 @@ struct hwrm_fw_reset_output {
u8 valid;
};
+/* hwrm_fw_qstatus */
+/* Input (24 bytes) */
+struct hwrm_fw_qstatus_input {
+ __le16 req_type;
+ __le16 cmpl_ring;
+ __le16 seq_id;
+ __le16 target_id;
+ __le64 resp_addr;
+ u8 embedded_proc_type;
+ #define FW_QSTATUS_REQ_EMBEDDED_PROC_TYPE_BOOT (0x0UL << 0)
+ #define FW_QSTATUS_REQ_EMBEDDED_PROC_TYPE_MGMT (0x1UL << 0)
+ #define FW_QSTATUS_REQ_EMBEDDED_PROC_TYPE_NETCTRL (0x2UL << 0)
+ #define FW_QSTATUS_REQ_EMBEDDED_PROC_TYPE_ROCE (0x3UL << 0)
+ #define FW_QSTATUS_REQ_EMBEDDED_PROC_TYPE_RSVD (0x4UL << 0)
+ u8 unused_0[7];
+};
+
+/* Output (16 bytes) */
+struct hwrm_fw_qstatus_output {
+ __le16 error_code;
+ __le16 req_type;
+ __le16 seq_id;
+ __le16 resp_len;
+ u8 selfrst_status;
+ #define FW_QSTATUS_RESP_SELFRST_STATUS_SELFRSTNONE (0x0UL << 0)
+ #define FW_QSTATUS_RESP_SELFRST_STATUS_SELFRSTASAP (0x1UL << 0)
+ #define FW_QSTATUS_RESP_SELFRST_STATUS_SELFRSTPCIERST (0x2UL << 0)
+ u8 unused_0;
+ __le16 unused_1;
+ u8 unused_2;
+ u8 unused_3;
+ u8 unused_4;
+ u8 valid;
+};
+
/* hwrm_exec_fwd_resp */
/* Input (128 bytes) */
struct hwrm_exec_fwd_resp_input {
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_nvm_defs.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_nvm_defs.h
index 43ef392..40a7b0e 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_nvm_defs.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_nvm_defs.h
@@ -1,6 +1,6 @@
/* Broadcom NetXtreme-C/E network driver.
*
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
index 0c5f510..8457850 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c
@@ -1,6 +1,6 @@
/* Broadcom NetXtreme-C/E network driver.
*
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -771,12 +771,8 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf)
PORT_PHY_QCFG_RESP_LINK_NO_LINK) {
phy_qcfg_resp.link =
PORT_PHY_QCFG_RESP_LINK_LINK;
- if (phy_qcfg_resp.auto_link_speed)
- phy_qcfg_resp.link_speed =
- phy_qcfg_resp.auto_link_speed;
- else
- phy_qcfg_resp.link_speed =
- phy_qcfg_resp.force_link_speed;
+ phy_qcfg_resp.link_speed = cpu_to_le16(
+ PORT_PHY_QCFG_RESP_LINK_SPEED_10GB);
phy_qcfg_resp.duplex =
PORT_PHY_QCFG_RESP_DUPLEX_FULL;
phy_qcfg_resp.pause =
@@ -859,8 +855,8 @@ void bnxt_update_vf_mac(struct bnxt *bp)
* default but the stored zero MAC will allow the VF user to change
* the random MAC address using ndo_set_mac_address() if he wants.
*/
- if (!ether_addr_equal(resp->perm_mac_address, bp->vf.mac_addr))
- memcpy(bp->vf.mac_addr, resp->perm_mac_address, ETH_ALEN);
+ if (!ether_addr_equal(resp->mac_address, bp->vf.mac_addr))
+ memcpy(bp->vf.mac_addr, resp->mac_address, ETH_ALEN);
/* overwrite netdev dev_addr with admin VF MAC */
if (is_valid_ether_addr(bp->vf.mac_addr))
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h
index c151280..3f08354 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.h
@@ -1,6 +1,6 @@
/* Broadcom NetXtreme-C/E network driver.
*
- * Copyright (c) 2014-2015 Broadcom Corporation
+ * Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
--
1.8.3.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH net-next v2 2/9] bnxt_en: Improve flow control autoneg with Firmware 1.2.1 interface.
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 1/9] bnxt_en: Update to Firmware 1.2.2 spec Michael Chan
@ 2016-04-05 18:08 ` Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 3/9] bnxt_en: Add basic EEE support Michael Chan
` (7 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Michael Chan @ 2016-04-05 18:08 UTC (permalink / raw)
To: davem; +Cc: netdev
Make use of the new AUTONEG_PAUSE bit in the new interface to better
control autoneg flow control settings, independent of RX and TX
advertisement settings.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 28 +++++++++++++++++++----
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 10 ++++----
2 files changed, 27 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index bfe98cb..2b5a541 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4557,6 +4557,9 @@ static void
bnxt_hwrm_set_pause_common(struct bnxt *bp, struct hwrm_port_phy_cfg_input *req)
{
if (bp->link_info.autoneg & BNXT_AUTONEG_FLOW_CTRL) {
+ if (bp->hwrm_spec_code >= 0x10201)
+ req->auto_pause =
+ PORT_PHY_CFG_REQ_AUTO_PAUSE_AUTONEG_PAUSE;
if (bp->link_info.req_flow_ctrl & BNXT_LINK_PAUSE_RX)
req->auto_pause |= PORT_PHY_CFG_REQ_AUTO_PAUSE_RX;
if (bp->link_info.req_flow_ctrl & BNXT_LINK_PAUSE_TX)
@@ -4570,6 +4573,11 @@ bnxt_hwrm_set_pause_common(struct bnxt *bp, struct hwrm_port_phy_cfg_input *req)
req->force_pause |= PORT_PHY_CFG_REQ_FORCE_PAUSE_TX;
req->enables |=
cpu_to_le32(PORT_PHY_CFG_REQ_ENABLES_FORCE_PAUSE);
+ if (bp->hwrm_spec_code >= 0x10201) {
+ req->auto_pause = req->force_pause;
+ req->enables |= cpu_to_le32(
+ PORT_PHY_CFG_REQ_ENABLES_AUTO_PAUSE);
+ }
}
}
@@ -4656,7 +4664,8 @@ static int bnxt_update_phy_setting(struct bnxt *bp)
return rc;
}
if ((link_info->autoneg & BNXT_AUTONEG_FLOW_CTRL) &&
- link_info->auto_pause_setting != link_info->req_flow_ctrl)
+ (link_info->auto_pause_setting & BNXT_LINK_PAUSE_BOTH) !=
+ link_info->req_flow_ctrl)
update_pause = true;
if (!(link_info->autoneg & BNXT_AUTONEG_FLOW_CTRL) &&
link_info->force_pause_setting != link_info->req_flow_ctrl)
@@ -5825,15 +5834,24 @@ static int bnxt_probe_phy(struct bnxt *bp)
/*initialize the ethool setting copy with NVM settings */
if (BNXT_AUTO_MODE(link_info->auto_mode)) {
- link_info->autoneg = BNXT_AUTONEG_SPEED |
- BNXT_AUTONEG_FLOW_CTRL;
+ link_info->autoneg = BNXT_AUTONEG_SPEED;
+ if (bp->hwrm_spec_code >= 0x10201) {
+ if (link_info->auto_pause_setting &
+ PORT_PHY_CFG_REQ_AUTO_PAUSE_AUTONEG_PAUSE)
+ link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
+ } else {
+ link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
+ }
link_info->advertising = link_info->auto_link_speeds;
- link_info->req_flow_ctrl = link_info->auto_pause_setting;
} else {
link_info->req_link_speed = link_info->force_link_speed;
link_info->req_duplex = link_info->duplex_setting;
- link_info->req_flow_ctrl = link_info->force_pause_setting;
}
+ if (link_info->autoneg & BNXT_AUTONEG_FLOW_CTRL)
+ link_info->req_flow_ctrl =
+ link_info->auto_pause_setting & BNXT_LINK_PAUSE_BOTH;
+ else
+ link_info->req_flow_ctrl = link_info->force_pause_setting;
return rc;
}
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index f103f9b..99b1740 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -874,7 +874,9 @@ static int bnxt_set_pauseparam(struct net_device *dev,
return -EINVAL;
link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
- link_info->req_flow_ctrl |= BNXT_LINK_PAUSE_BOTH;
+ if (bp->hwrm_spec_code >= 0x10201)
+ link_info->req_flow_ctrl =
+ PORT_PHY_CFG_REQ_AUTO_PAUSE_AUTONEG_PAUSE;
} else {
/* when transition from auto pause to force pause,
* force a link change
@@ -882,17 +884,13 @@ static int bnxt_set_pauseparam(struct net_device *dev,
if (link_info->autoneg & BNXT_AUTONEG_FLOW_CTRL)
link_info->force_link_chng = true;
link_info->autoneg &= ~BNXT_AUTONEG_FLOW_CTRL;
- link_info->req_flow_ctrl &= ~BNXT_LINK_PAUSE_BOTH;
+ link_info->req_flow_ctrl = 0;
}
if (epause->rx_pause)
link_info->req_flow_ctrl |= BNXT_LINK_PAUSE_RX;
- else
- link_info->req_flow_ctrl &= ~BNXT_LINK_PAUSE_RX;
if (epause->tx_pause)
link_info->req_flow_ctrl |= BNXT_LINK_PAUSE_TX;
- else
- link_info->req_flow_ctrl &= ~BNXT_LINK_PAUSE_TX;
if (netif_running(dev))
rc = bnxt_hwrm_set_pause(bp);
--
1.8.3.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH net-next v2 3/9] bnxt_en: Add basic EEE support.
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 1/9] bnxt_en: Update to Firmware 1.2.2 spec Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 2/9] bnxt_en: Improve flow control autoneg with Firmware 1.2.1 interface Michael Chan
@ 2016-04-05 18:08 ` Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 4/9] bnxt_en: Add EEE setup code Michael Chan
` (6 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Michael Chan @ 2016-04-05 18:08 UTC (permalink / raw)
To: davem; +Cc: netdev
Get EEE capability and the initial EEE settings from firmware.
Add "EEE is active | not active" to link up dmesg.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 82 ++++++++++++++++++++++-
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 4 ++
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h | 1 +
4 files changed, 87 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 2b5a541..7442e20 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4488,12 +4488,49 @@ static void bnxt_report_link(struct bnxt *bp)
speed = bnxt_fw_to_ethtool_speed(bp->link_info.link_speed);
netdev_info(bp->dev, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n",
speed, duplex, flow_ctrl);
+ if (bp->flags & BNXT_FLAG_EEE_CAP)
+ netdev_info(bp->dev, "EEE is %s\n",
+ bp->eee.eee_active ? "active" :
+ "not active");
} else {
netif_carrier_off(bp->dev);
netdev_err(bp->dev, "NIC Link is Down\n");
}
}
+static int bnxt_hwrm_phy_qcaps(struct bnxt *bp)
+{
+ int rc = 0;
+ struct hwrm_port_phy_qcaps_input req = {0};
+ struct hwrm_port_phy_qcaps_output *resp = bp->hwrm_cmd_resp_addr;
+
+ if (bp->hwrm_spec_code < 0x10201)
+ return 0;
+
+ bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_PORT_PHY_QCAPS, -1, -1);
+
+ mutex_lock(&bp->hwrm_cmd_lock);
+ rc = _hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+ if (rc)
+ goto hwrm_phy_qcaps_exit;
+
+ if (resp->eee_supported & PORT_PHY_QCAPS_RESP_EEE_SUPPORTED) {
+ struct ethtool_eee *eee = &bp->eee;
+ u16 fw_speeds = le16_to_cpu(resp->supported_speeds_eee_mode);
+
+ bp->flags |= BNXT_FLAG_EEE_CAP;
+ eee->supported = _bnxt_fw_to_ethtool_adv_spds(fw_speeds, 0);
+ bp->lpi_tmr_lo = le32_to_cpu(resp->tx_lpi_timer_low) &
+ PORT_PHY_QCAPS_RESP_TX_LPI_TIMER_LOW_MASK;
+ bp->lpi_tmr_hi = le32_to_cpu(resp->valid_tx_lpi_timer_high) &
+ PORT_PHY_QCAPS_RESP_TX_LPI_TIMER_HIGH_MASK;
+ }
+
+hwrm_phy_qcaps_exit:
+ mutex_unlock(&bp->hwrm_cmd_lock);
+ return rc;
+}
+
static int bnxt_update_link(struct bnxt *bp, bool chng_link_state)
{
int rc = 0;
@@ -4535,8 +4572,44 @@ static int bnxt_update_link(struct bnxt *bp, bool chng_link_state)
link_info->phy_ver[2] = resp->phy_bld;
link_info->media_type = resp->media_type;
link_info->transceiver = resp->xcvr_pkg_type;
- link_info->phy_addr = resp->eee_config_phy_addr;
+ link_info->phy_addr = resp->eee_config_phy_addr &
+ PORT_PHY_QCFG_RESP_PHY_ADDR_MASK;
+
+ if (bp->flags & BNXT_FLAG_EEE_CAP) {
+ struct ethtool_eee *eee = &bp->eee;
+ u16 fw_speeds;
+
+ eee->eee_active = 0;
+ if (resp->eee_config_phy_addr &
+ PORT_PHY_QCFG_RESP_EEE_CONFIG_EEE_ACTIVE) {
+ eee->eee_active = 1;
+ fw_speeds = le16_to_cpu(
+ resp->link_partner_adv_eee_link_speed_mask);
+ eee->lp_advertised =
+ _bnxt_fw_to_ethtool_adv_spds(fw_speeds, 0);
+ }
+
+ /* Pull initial EEE config */
+ if (!chng_link_state) {
+ if (resp->eee_config_phy_addr &
+ PORT_PHY_QCFG_RESP_EEE_CONFIG_EEE_ENABLED)
+ eee->eee_enabled = 1;
+ fw_speeds = le16_to_cpu(resp->adv_eee_link_speed_mask);
+ eee->advertised =
+ _bnxt_fw_to_ethtool_adv_spds(fw_speeds, 0);
+
+ if (resp->eee_config_phy_addr &
+ PORT_PHY_QCFG_RESP_EEE_CONFIG_EEE_TX_LPI) {
+ __le32 tmr;
+
+ eee->tx_lpi_enabled = 1;
+ tmr = resp->xcvr_identifier_type_tx_lpi_timer;
+ eee->tx_lpi_timer = le32_to_cpu(tmr) &
+ PORT_PHY_QCFG_RESP_TX_LPI_TIMER_MASK;
+ }
+ }
+ }
/* TODO: need to add more logic to report VF link */
if (chng_link_state) {
if (link_info->phy_link_status == BNXT_LINK_LINK)
@@ -5825,6 +5898,13 @@ static int bnxt_probe_phy(struct bnxt *bp)
int rc = 0;
struct bnxt_link_info *link_info = &bp->link_info;
+ rc = bnxt_hwrm_phy_qcaps(bp);
+ if (rc) {
+ netdev_err(bp->dev, "Probe phy can't get phy capabilities (rc: %x)\n",
+ rc);
+ return rc;
+ }
+
rc = bnxt_update_link(bp, false);
if (rc) {
netdev_err(bp->dev, "Probe phy can't update link (rc: %x)\n",
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index e98c37a..5e83405 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -874,6 +874,7 @@ struct bnxt {
#define BNXT_FLAG_RFS 0x100
#define BNXT_FLAG_SHARED_RINGS 0x200
#define BNXT_FLAG_PORT_STATS 0x400
+ #define BNXT_FLAG_EEE_CAP 0x1000
#define BNXT_FLAG_ALL_CONFIG_FEATS (BNXT_FLAG_TPA | \
BNXT_FLAG_RFS | \
@@ -1011,6 +1012,9 @@ struct bnxt {
int ntp_fltr_count;
struct bnxt_link_info link_info;
+ struct ethtool_eee eee;
+ u32 lpi_tmr_lo;
+ u32 lpi_tmr_hi;
};
#ifdef CONFIG_NET_RX_BUSY_POLL
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 99b1740..bdc6220 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -597,7 +597,7 @@ static void bnxt_get_drvinfo(struct net_device *dev,
kfree(pkglog);
}
-static u32 _bnxt_fw_to_ethtool_adv_spds(u16 fw_speeds, u8 fw_pause)
+u32 _bnxt_fw_to_ethtool_adv_spds(u16 fw_speeds, u8 fw_pause)
{
u32 speed_mask = 0;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
index b2d8bd3..e061f8f 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
@@ -12,6 +12,7 @@
extern const struct ethtool_ops bnxt_ethtool_ops;
+u32 _bnxt_fw_to_ethtool_adv_spds(u16, u8);
u32 bnxt_fw_to_ethtool_speed(u16);
#endif
--
1.8.3.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH net-next v2 4/9] bnxt_en: Add EEE setup code.
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
` (2 preceding siblings ...)
2016-04-05 18:08 ` [PATCH net-next v2 3/9] bnxt_en: Add basic EEE support Michael Chan
@ 2016-04-05 18:08 ` Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 5/9] bnxt_en: Add get_eee() and set_eee() ethtool support Michael Chan
` (5 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Michael Chan @ 2016-04-05 18:08 UTC (permalink / raw)
To: davem; +Cc: netdev
1. Add bnxt_hwrm_set_eee() function to setup EEE firmware parameters based
on the bp->eee settings.
2. The new function bnxt_eee_config_ok() will check if EEE parameters need
to be modified due to autoneg changes.
3. bnxt_hwrm_set_link() has added a new parameter to update EEE. If the
parameter is set, it will call bnxt_hwrm_set_eee().
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 58 ++++++++++++++++++++++-
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 2 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 4 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h | 1 +
4 files changed, 60 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 7442e20..2c3c795 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4711,7 +4711,30 @@ int bnxt_hwrm_set_pause(struct bnxt *bp)
return rc;
}
-int bnxt_hwrm_set_link_setting(struct bnxt *bp, bool set_pause)
+static void bnxt_hwrm_set_eee(struct bnxt *bp,
+ struct hwrm_port_phy_cfg_input *req)
+{
+ struct ethtool_eee *eee = &bp->eee;
+
+ if (eee->eee_enabled) {
+ u16 eee_speeds;
+ u32 flags = PORT_PHY_CFG_REQ_FLAGS_EEE_ENABLE;
+
+ if (eee->tx_lpi_enabled)
+ flags |= PORT_PHY_CFG_REQ_FLAGS_EEE_TX_LPI_ENABLE;
+ else
+ flags |= PORT_PHY_CFG_REQ_FLAGS_EEE_TX_LPI_DISABLE;
+
+ req->flags |= cpu_to_le32(flags);
+ eee_speeds = bnxt_get_fw_auto_link_speeds(eee->advertised);
+ req->eee_link_speed_mask = cpu_to_le16(eee_speeds);
+ req->tx_lpi_timer = cpu_to_le32(eee->tx_lpi_timer);
+ } else {
+ req->flags |= cpu_to_le32(PORT_PHY_CFG_REQ_FLAGS_EEE_DISABLE);
+ }
+}
+
+int bnxt_hwrm_set_link_setting(struct bnxt *bp, bool set_pause, bool set_eee)
{
struct hwrm_port_phy_cfg_input req = {0};
@@ -4720,14 +4743,42 @@ int bnxt_hwrm_set_link_setting(struct bnxt *bp, bool set_pause)
bnxt_hwrm_set_pause_common(bp, &req);
bnxt_hwrm_set_link_common(bp, &req);
+
+ if (set_eee)
+ bnxt_hwrm_set_eee(bp, &req);
return hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
}
+static bool bnxt_eee_config_ok(struct bnxt *bp)
+{
+ struct ethtool_eee *eee = &bp->eee;
+ struct bnxt_link_info *link_info = &bp->link_info;
+
+ if (!(bp->flags & BNXT_FLAG_EEE_CAP))
+ return true;
+
+ if (eee->eee_enabled) {
+ u32 advertising =
+ _bnxt_fw_to_ethtool_adv_spds(link_info->advertising, 0);
+
+ if (!(link_info->autoneg & BNXT_AUTONEG_SPEED)) {
+ eee->eee_enabled = 0;
+ return false;
+ }
+ if (eee->advertised & ~advertising) {
+ eee->advertised = advertising & eee->supported;
+ return false;
+ }
+ }
+ return true;
+}
+
static int bnxt_update_phy_setting(struct bnxt *bp)
{
int rc;
bool update_link = false;
bool update_pause = false;
+ bool update_eee = false;
struct bnxt_link_info *link_info = &bp->link_info;
rc = bnxt_update_link(bp, true);
@@ -4757,8 +4808,11 @@ static int bnxt_update_phy_setting(struct bnxt *bp)
update_link = true;
}
+ if (!bnxt_eee_config_ok(bp))
+ update_eee = true;
+
if (update_link)
- rc = bnxt_hwrm_set_link_setting(bp, update_pause);
+ rc = bnxt_hwrm_set_link_setting(bp, update_pause, update_eee);
else if (update_pause)
rc = bnxt_hwrm_set_pause(bp);
if (rc) {
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 5e83405..a981e2c 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1112,7 +1112,7 @@ int hwrm_send_message_silent(struct bnxt *, void *, u32, int);
int bnxt_hwrm_set_coal(struct bnxt *);
int bnxt_hwrm_func_qcaps(struct bnxt *);
int bnxt_hwrm_set_pause(struct bnxt *);
-int bnxt_hwrm_set_link_setting(struct bnxt *, bool);
+int bnxt_hwrm_set_link_setting(struct bnxt *, bool, bool);
int bnxt_open_nic(struct bnxt *, bool, bool);
int bnxt_close_nic(struct bnxt *, bool, bool);
int bnxt_get_max_rings(struct bnxt *, int *, int *, bool);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index bdc6220..14f0520 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -763,7 +763,7 @@ static u32 bnxt_get_fw_speed(struct net_device *dev, u16 ethtool_speed)
return 0;
}
-static u16 bnxt_get_fw_auto_link_speeds(u32 advertising)
+u16 bnxt_get_fw_auto_link_speeds(u32 advertising)
{
u16 fw_speed_mask = 0;
@@ -840,7 +840,7 @@ static int bnxt_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
}
if (netif_running(dev))
- rc = bnxt_hwrm_set_link_setting(bp, set_pause);
+ rc = bnxt_hwrm_set_link_setting(bp, set_pause, false);
set_setting_exit:
return rc;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
index e061f8f..3abc03b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
@@ -14,5 +14,6 @@ extern const struct ethtool_ops bnxt_ethtool_ops;
u32 _bnxt_fw_to_ethtool_adv_spds(u16, u8);
u32 bnxt_fw_to_ethtool_speed(u16);
+u16 bnxt_get_fw_auto_link_speeds(u32);
#endif
--
1.8.3.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH net-next v2 5/9] bnxt_en: Add get_eee() and set_eee() ethtool support.
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
` (3 preceding siblings ...)
2016-04-05 18:08 ` [PATCH net-next v2 4/9] bnxt_en: Add EEE setup code Michael Chan
@ 2016-04-05 18:08 ` Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 6/9] bnxt_en: Set async event bits when registering with the firmware Michael Chan
` (4 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Michael Chan @ 2016-04-05 18:08 UTC (permalink / raw)
To: davem; +Cc: netdev
Allow users to get|set EEE parameters.
v2: Added comment for preserving the tx_lpi_timer value in get_eee.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 76 +++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 14f0520..47e08a8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -1379,6 +1379,80 @@ static int bnxt_set_eeprom(struct net_device *dev,
eeprom->len);
}
+static int bnxt_set_eee(struct net_device *dev, struct ethtool_eee *edata)
+{
+ struct bnxt *bp = netdev_priv(dev);
+ struct ethtool_eee *eee = &bp->eee;
+ struct bnxt_link_info *link_info = &bp->link_info;
+ u32 advertising =
+ _bnxt_fw_to_ethtool_adv_spds(link_info->advertising, 0);
+ int rc = 0;
+
+ if (BNXT_VF(bp))
+ return 0;
+
+ if (!(bp->flags & BNXT_FLAG_EEE_CAP))
+ return -EOPNOTSUPP;
+
+ if (!edata->eee_enabled)
+ goto eee_ok;
+
+ if (!(link_info->autoneg & BNXT_AUTONEG_SPEED)) {
+ netdev_warn(dev, "EEE requires autoneg\n");
+ return -EINVAL;
+ }
+ if (edata->tx_lpi_enabled) {
+ if (bp->lpi_tmr_hi && (edata->tx_lpi_timer > bp->lpi_tmr_hi ||
+ edata->tx_lpi_timer < bp->lpi_tmr_lo)) {
+ netdev_warn(dev, "Valid LPI timer range is %d and %d microsecs\n",
+ bp->lpi_tmr_lo, bp->lpi_tmr_hi);
+ return -EINVAL;
+ } else if (!bp->lpi_tmr_hi) {
+ edata->tx_lpi_timer = eee->tx_lpi_timer;
+ }
+ }
+ if (!edata->advertised) {
+ edata->advertised = advertising & eee->supported;
+ } else if (edata->advertised & ~advertising) {
+ netdev_warn(dev, "EEE advertised %x must be a subset of autoneg advertised speeds %x\n",
+ edata->advertised, advertising);
+ return -EINVAL;
+ }
+
+ eee->advertised = edata->advertised;
+ eee->tx_lpi_enabled = edata->tx_lpi_enabled;
+ eee->tx_lpi_timer = edata->tx_lpi_timer;
+eee_ok:
+ eee->eee_enabled = edata->eee_enabled;
+
+ if (netif_running(dev))
+ rc = bnxt_hwrm_set_link_setting(bp, false, true);
+
+ return rc;
+}
+
+static int bnxt_get_eee(struct net_device *dev, struct ethtool_eee *edata)
+{
+ struct bnxt *bp = netdev_priv(dev);
+
+ if (!(bp->flags & BNXT_FLAG_EEE_CAP))
+ return -EOPNOTSUPP;
+
+ *edata = bp->eee;
+ if (!bp->eee.eee_enabled) {
+ /* Preserve tx_lpi_timer so that the last value will be used
+ * by default when it is re-enabled.
+ */
+ edata->advertised = 0;
+ edata->tx_lpi_enabled = 0;
+ }
+
+ if (!bp->eee.eee_active)
+ edata->lp_advertised = 0;
+
+ return 0;
+}
+
const struct ethtool_ops bnxt_ethtool_ops = {
.get_settings = bnxt_get_settings,
.set_settings = bnxt_set_settings,
@@ -1407,4 +1481,6 @@ const struct ethtool_ops bnxt_ethtool_ops = {
.get_eeprom = bnxt_get_eeprom,
.set_eeprom = bnxt_set_eeprom,
.get_link = bnxt_get_link,
+ .get_eee = bnxt_get_eee,
+ .set_eee = bnxt_set_eee,
};
--
1.8.3.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH net-next v2 6/9] bnxt_en: Set async event bits when registering with the firmware.
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
` (4 preceding siblings ...)
2016-04-05 18:08 ` [PATCH net-next v2 5/9] bnxt_en: Add get_eee() and set_eee() ethtool support Michael Chan
@ 2016-04-05 18:09 ` Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 7/9] bnxt_en: Add unsupported SFP+ module warnings Michael Chan
` (3 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Michael Chan @ 2016-04-05 18:09 UTC (permalink / raw)
To: davem; +Cc: netdev
Currently, the driver only sets bit 0 of the async_event_fwd fields.
To be compatible with the latest spec, we need to set the
appropriate event bits handled by the driver. We should be handling
link change and PF driver unload events, so these 2 bits should be
set.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 2c3c795..dd0b32c 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -118,6 +118,11 @@ static const u16 bnxt_vf_req_snif[] = {
HWRM_CFA_L2_FILTER_ALLOC,
};
+static const u16 bnxt_async_events_arr[] = {
+ HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE,
+ HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD,
+};
+
static bool bnxt_vf_pciid(enum board_idx idx)
{
return (idx == BCM57304_VF || idx == BCM57404_VF);
@@ -2751,6 +2756,8 @@ static int bnxt_hwrm_func_drv_rgtr(struct bnxt *bp)
{
struct hwrm_func_drv_rgtr_input req = {0};
int i;
+ DECLARE_BITMAP(async_events_bmap, 256);
+ u32 *events = (u32 *)async_events_bmap;
bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_DRV_RGTR, -1, -1);
@@ -2759,10 +2766,13 @@ static int bnxt_hwrm_func_drv_rgtr(struct bnxt *bp)
FUNC_DRV_RGTR_REQ_ENABLES_VER |
FUNC_DRV_RGTR_REQ_ENABLES_ASYNC_EVENT_FWD);
- /* TODO: current async event fwd bits are not defined and the firmware
- * only checks if it is non-zero to enable async event forwarding
- */
- req.async_event_fwd[0] |= cpu_to_le32(1);
+ memset(async_events_bmap, 0, sizeof(async_events_bmap));
+ for (i = 0; i < ARRAY_SIZE(bnxt_async_events_arr); i++)
+ __set_bit(bnxt_async_events_arr[i], async_events_bmap);
+
+ for (i = 0; i < 8; i++)
+ req.async_event_fwd[i] |= cpu_to_le32(events[i]);
+
req.os_type = cpu_to_le16(FUNC_DRV_RGTR_REQ_OS_TYPE_LINUX);
req.ver_maj = DRV_VER_MAJ;
req.ver_min = DRV_VER_MIN;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH net-next v2 7/9] bnxt_en: Add unsupported SFP+ module warnings.
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
` (5 preceding siblings ...)
2016-04-05 18:09 ` [PATCH net-next v2 6/9] bnxt_en: Set async event bits when registering with the firmware Michael Chan
@ 2016-04-05 18:09 ` Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 8/9] bnxt_en: Check for valid forced speed during ethtool -s Michael Chan
` (2 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Michael Chan @ 2016-04-05 18:09 UTC (permalink / raw)
To: davem; +Cc: netdev
Add the PORT_CONN_NOT_ALLOWED async event handling logic. The driver
will print an appropriate warning to reflect the SFP+ module enforcement
policy done in the firmware.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 55 +++++++++++++++++++++++++++++++
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 3 ++
2 files changed, 58 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index dd0b32c..597e472 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -121,6 +121,7 @@ static const u16 bnxt_vf_req_snif[] = {
static const u16 bnxt_async_events_arr[] = {
HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE,
HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD,
+ HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED,
};
static bool bnxt_vf_pciid(enum board_idx idx)
@@ -1236,6 +1237,19 @@ next_rx_no_prod:
return rc;
}
+#define BNXT_GET_EVENT_PORT(data) \
+ ((data) & \
+ HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK)
+
+#define BNXT_EVENT_POLICY_MASK \
+ HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_MASK
+
+#define BNXT_EVENT_POLICY_SFT \
+ HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_SFT
+
+#define BNXT_GET_EVENT_POLICY(data) \
+ (((data) & BNXT_EVENT_POLICY_MASK) >> BNXT_EVENT_POLICY_SFT)
+
static int bnxt_async_event_process(struct bnxt *bp,
struct hwrm_async_event_cmpl *cmpl)
{
@@ -1249,6 +1263,22 @@ static int bnxt_async_event_process(struct bnxt *bp,
case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD:
set_bit(BNXT_HWRM_PF_UNLOAD_SP_EVENT, &bp->sp_event);
break;
+ case HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED: {
+ u32 data1 = le32_to_cpu(cmpl->event_data1);
+ u16 port_id = BNXT_GET_EVENT_PORT(data1);
+
+ if (BNXT_VF(bp))
+ break;
+
+ if (bp->pf.port_id != port_id)
+ break;
+
+ bp->link_info.last_port_module_event =
+ BNXT_GET_EVENT_POLICY(data1);
+
+ set_bit(BNXT_HWRM_PORT_MODULE_SP_EVENT, &bp->sp_event);
+ break;
+ }
default:
netdev_err(bp->dev, "unhandled ASYNC event (id 0x%x)\n",
event_id);
@@ -5447,6 +5477,28 @@ bnxt_restart_timer:
mod_timer(&bp->timer, jiffies + bp->current_interval);
}
+static void bnxt_port_module_event(struct bnxt *bp)
+{
+ struct bnxt_link_info *link_info = &bp->link_info;
+ struct hwrm_port_phy_qcfg_output *resp = &link_info->phy_qcfg_resp;
+
+ if (bnxt_update_link(bp, true))
+ return;
+
+ if (link_info->last_port_module_event != 0) {
+ netdev_warn(bp->dev, "Unqualified SFP+ module detected on port %d\n",
+ bp->pf.port_id);
+ if (bp->hwrm_spec_code >= 0x10201) {
+ netdev_warn(bp->dev, "Module part number %s\n",
+ resp->phy_vendor_partnumber);
+ }
+ }
+ if (link_info->last_port_module_event == 1)
+ netdev_warn(bp->dev, "TX is disabled\n");
+ if (link_info->last_port_module_event == 3)
+ netdev_warn(bp->dev, "Shutdown SFP+ module\n");
+}
+
static void bnxt_cfg_ntp_filters(struct bnxt *);
static void bnxt_sp_task(struct work_struct *work)
@@ -5494,6 +5546,9 @@ static void bnxt_sp_task(struct work_struct *work)
rtnl_unlock();
}
+ if (test_and_clear_bit(BNXT_HWRM_PORT_MODULE_SP_EVENT, &bp->sp_event))
+ bnxt_port_module_event(bp);
+
if (test_and_clear_bit(BNXT_PERIODIC_STATS_SP_EVENT, &bp->sp_event))
bnxt_hwrm_port_qstats(bp);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index a981e2c..cc8e38a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -825,6 +825,8 @@ struct bnxt_link_info {
u16 req_link_speed;
u32 advertising;
bool force_link_chng;
+
+ u8 last_port_module_event;
/* a copy of phy_qcfg output used to report link
* info to VF
*/
@@ -992,6 +994,7 @@ struct bnxt {
#define BNXT_RST_RING_SP_EVENT 7
#define BNXT_HWRM_PF_UNLOAD_SP_EVENT 8
#define BNXT_PERIODIC_STATS_SP_EVENT 9
+#define BNXT_HWRM_PORT_MODULE_SP_EVENT 10
struct bnxt_pf_info pf;
#ifdef CONFIG_BNXT_SRIOV
--
1.8.3.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH net-next v2 8/9] bnxt_en: Check for valid forced speed during ethtool -s.
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
` (6 preceding siblings ...)
2016-04-05 18:09 ` [PATCH net-next v2 7/9] bnxt_en: Add unsupported SFP+ module warnings Michael Chan
@ 2016-04-05 18:09 ` Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 9/9] bnxt_en: Improve ethtool .get_settings() Michael Chan
2016-04-05 20:15 ` [PATCH net-next v2 0/9] bnxt_en: Updates for net-next David Miller
9 siblings, 0 replies; 15+ messages in thread
From: Michael Chan @ 2016-04-05 18:09 UTC (permalink / raw)
To: davem; +Cc: netdev
Check that the forced speed is a valid speed supported by firmware.
If not supported, return -EINVAL.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 48 ++++++++++++++++++-----
1 file changed, 38 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 47e08a8..952b5ba 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -739,28 +739,49 @@ static int bnxt_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
static u32 bnxt_get_fw_speed(struct net_device *dev, u16 ethtool_speed)
{
+ struct bnxt *bp = netdev_priv(dev);
+ struct bnxt_link_info *link_info = &bp->link_info;
+ u16 support_spds = link_info->support_speeds;
+ u32 fw_speed = 0;
+
switch (ethtool_speed) {
case SPEED_100:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_100MB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_100MB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_100MB;
+ break;
case SPEED_1000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_1GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_1GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_1GB;
+ break;
case SPEED_2500:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_2_5GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_2_5GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_2_5GB;
+ break;
case SPEED_10000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_10GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_10GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_10GB;
+ break;
case SPEED_20000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_20GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_20GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_20GB;
+ break;
case SPEED_25000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_25GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_25GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_25GB;
+ break;
case SPEED_40000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_40GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_40GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_40GB;
+ break;
case SPEED_50000:
- return PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_50GB;
+ if (support_spds & BNXT_LINK_SPEED_MSK_50GB)
+ fw_speed = PORT_PHY_CFG_REQ_AUTO_LINK_SPEED_50GB;
+ break;
default:
netdev_err(dev, "unsupported speed!\n");
break;
}
- return 0;
+ return fw_speed;
}
u16 bnxt_get_fw_auto_link_speeds(u32 advertising)
@@ -823,6 +844,8 @@ static int bnxt_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
*/
set_pause = true;
} else {
+ u16 fw_speed;
+
/* TODO: currently don't support half duplex */
if (cmd->duplex == DUPLEX_HALF) {
netdev_err(dev, "HALF DUPLEX is not supported!\n");
@@ -833,7 +856,12 @@ static int bnxt_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
if (cmd->duplex == DUPLEX_UNKNOWN)
cmd->duplex = DUPLEX_FULL;
speed = ethtool_cmd_speed(cmd);
- link_info->req_link_speed = bnxt_get_fw_speed(dev, speed);
+ fw_speed = bnxt_get_fw_speed(dev, speed);
+ if (!fw_speed) {
+ rc = -EINVAL;
+ goto set_setting_exit;
+ }
+ link_info->req_link_speed = fw_speed;
link_info->req_duplex = BNXT_LINK_DUPLEX_FULL;
link_info->autoneg = 0;
link_info->advertising = 0;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH net-next v2 9/9] bnxt_en: Improve ethtool .get_settings().
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
` (7 preceding siblings ...)
2016-04-05 18:09 ` [PATCH net-next v2 8/9] bnxt_en: Check for valid forced speed during ethtool -s Michael Chan
@ 2016-04-05 18:09 ` Michael Chan
2016-04-05 20:15 ` [PATCH net-next v2 0/9] bnxt_en: Updates for net-next David Miller
9 siblings, 0 replies; 15+ messages in thread
From: Michael Chan @ 2016-04-05 18:09 UTC (permalink / raw)
To: davem; +Cc: netdev
If autoneg is off, we should always report the speed and duplex settings
even if it is link down so the user knows the current settings. The
unknown speed and duplex should only be used for autoneg when link is
down.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 952b5ba..a2e9324 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -698,10 +698,23 @@ static int bnxt_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
if (link_info->phy_link_status == BNXT_LINK_LINK)
cmd->lp_advertising =
bnxt_fw_to_ethtool_lp_adv(link_info);
+ ethtool_speed = bnxt_fw_to_ethtool_speed(link_info->link_speed);
+ if (!netif_carrier_ok(dev))
+ cmd->duplex = DUPLEX_UNKNOWN;
+ else if (link_info->duplex & BNXT_LINK_DUPLEX_FULL)
+ cmd->duplex = DUPLEX_FULL;
+ else
+ cmd->duplex = DUPLEX_HALF;
} else {
cmd->autoneg = AUTONEG_DISABLE;
cmd->advertising = 0;
+ ethtool_speed =
+ bnxt_fw_to_ethtool_speed(link_info->req_link_speed);
+ cmd->duplex = DUPLEX_HALF;
+ if (link_info->req_duplex == BNXT_LINK_DUPLEX_FULL)
+ cmd->duplex = DUPLEX_FULL;
}
+ ethtool_cmd_speed_set(cmd, ethtool_speed);
cmd->port = PORT_NONE;
if (link_info->media_type == PORT_PHY_QCFG_RESP_MEDIA_TYPE_TP) {
@@ -719,14 +732,6 @@ static int bnxt_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->port = PORT_FIBRE;
}
- if (link_info->phy_link_status == BNXT_LINK_LINK) {
- if (link_info->duplex & BNXT_LINK_DUPLEX_FULL)
- cmd->duplex = DUPLEX_FULL;
- } else {
- cmd->duplex = DUPLEX_UNKNOWN;
- }
- ethtool_speed = bnxt_fw_to_ethtool_speed(link_info->link_speed);
- ethtool_cmd_speed_set(cmd, ethtool_speed);
if (link_info->transceiver ==
PORT_PHY_QCFG_RESP_XCVR_PKG_TYPE_XCVR_INTERNAL)
cmd->transceiver = XCVR_INTERNAL;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH net-next v2 0/9] bnxt_en: Updates for net-next.
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
` (8 preceding siblings ...)
2016-04-05 18:09 ` [PATCH net-next v2 9/9] bnxt_en: Improve ethtool .get_settings() Michael Chan
@ 2016-04-05 20:15 ` David Miller
9 siblings, 0 replies; 15+ messages in thread
From: David Miller @ 2016-04-05 20:15 UTC (permalink / raw)
To: michael.chan; +Cc: netdev
From: Michael Chan <michael.chan@broadcom.com>
Date: Tue, 5 Apr 2016 14:08:54 -0400
> Update to latest firmware interface, add EEE feature, unsupported SFP+
> module warning, and ethtool -s improvements.
>
> v2: Removed the GEEPROM patch and added more comments to the get_eee patch.
Series applied, thanks Michael.
Please send updates if something comes from that dialogue you are having
with Ben.
Thanks.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH net-next v2 0/9] bnxt_en: Updates for net-next.
2020-10-12 9:10 [PATCH net-next v2 0/9] bnxt_en: Updates " Michael Chan
@ 2020-10-12 21:48 ` Jakub Kicinski
0 siblings, 0 replies; 15+ messages in thread
From: Jakub Kicinski @ 2020-10-12 21:48 UTC (permalink / raw)
To: Michael Chan; +Cc: davem, netdev, gospo
On Mon, 12 Oct 2020 05:10:45 -0400 Michael Chan wrote:
> This series contains these main changes:
>
> 1. Change of default message level to enable more logging.
> 2. Some cleanups related to processing async events from firmware.
> 3. Allow online ethtool selftest on multi-function PFs.
> 4. Return stored firmware version information to devlink.
>
> v2:
> Patch 3: Change bnxt_reset_task() to silent mode.
> Patch 8 & 9: Ensure we copy NULL terminated fw strings to devlink.
> Patch 8 & 9: Return directly after the last bnxt_dl_info_put() call.
> Patch 9: If FW call to get stored dev info fails, return success to
> devlink without the stored versions.
Applied, thank you!
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH net-next v2 0/9] bnxt_en: Updates for net-next.
@ 2020-10-12 9:10 Michael Chan
2020-10-12 21:48 ` Jakub Kicinski
0 siblings, 1 reply; 15+ messages in thread
From: Michael Chan @ 2020-10-12 9:10 UTC (permalink / raw)
To: davem; +Cc: netdev, kuba, gospo
[-- Attachment #1: Type: text/plain, Size: 1572 bytes --]
This series contains these main changes:
1. Change of default message level to enable more logging.
2. Some cleanups related to processing async events from firmware.
3. Allow online ethtool selftest on multi-function PFs.
4. Return stored firmware version information to devlink.
v2:
Patch 3: Change bnxt_reset_task() to silent mode.
Patch 8 & 9: Ensure we copy NULL terminated fw strings to devlink.
Patch 8 & 9: Return directly after the last bnxt_dl_info_put() call.
Patch 9: If FW call to get stored dev info fails, return success to
devlink without the stored versions.
Michael Chan (4):
bnxt_en: Set driver default message level.
bnxt_en: Simplify bnxt_async_event_process().
bnxt_en: Log event_data1 and event_data2 when handling RESET_NOTIFY
event.
bnxt_en: Log unknown link speed appropriately.
Vasundhara Volam (5):
bnxt_en: Return -EROFS to user space, if NVM writes are not permitted.
bnxt_en: Enable online self tests for multi-host/NPAR mode.
bnxt_en: Add bnxt_hwrm_nvm_get_dev_info() to query NVM info.
bnxt_en: Refactor bnxt_dl_info_get().
bnxt_en: Add stored FW version info to devlink info_get cb.
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 39 +++--
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 +
.../net/ethernet/broadcom/bnxt/bnxt_devlink.c | 154 ++++++++++++------
.../net/ethernet/broadcom/bnxt/bnxt_devlink.h | 6 +
.../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 24 ++-
.../net/ethernet/broadcom/bnxt/bnxt_ethtool.h | 2 +
6 files changed, 164 insertions(+), 62 deletions(-)
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4166 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH net-next v2 0/9] bnxt_en: updates for net-next.
2016-05-15 7:04 [PATCH net-next v2 0/9] bnxt_en: updates " Michael Chan
@ 2016-05-15 17:36 ` David Miller
0 siblings, 0 replies; 15+ messages in thread
From: David Miller @ 2016-05-15 17:36 UTC (permalink / raw)
To: michael.chan; +Cc: netdev
From: Michael Chan <michael.chan@broadcom.com>
Date: Sun, 15 May 2016 03:04:42 -0400
> Non-critical bug fixes, improvements, a new ethtool feature, and a new
> device ID.
>
> v2: Fixed a bug in bnxt_get_module_eeprom() found by Ben Hutchings.
Series applied, thanks.
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH net-next v2 0/9] bnxt_en: updates for net-next.
@ 2016-05-15 7:04 Michael Chan
2016-05-15 17:36 ` David Miller
0 siblings, 1 reply; 15+ messages in thread
From: Michael Chan @ 2016-05-15 7:04 UTC (permalink / raw)
To: davem; +Cc: netdev
Non-critical bug fixes, improvements, a new ethtool feature, and a new
device ID.
v2: Fixed a bug in bnxt_get_module_eeprom() found by Ben Hutchings.
Ajit Khaparde (2):
bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPRO
bnxt_en: Report PCIe link speed and width during driver load
Michael Chan (6):
bnxt_en: Reduce maximum ring pages if page size is 64K.
bnxt_en: Improve the delay logic for firmware response.
bnxt_en: Fix length value in dmesg log firmware error message.
bnxt_en: Simplify and improve unsupported SFP+ module reporting.
bnxt_en: Add BCM57314 device ID.
bnxt_en: Use dma_rmb() instead of rmb().
Satish Baddipadige (1):
bnxt_en: Fix invalid max channel parameter in ethtool -l.
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 111 +++++++++++--------
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 19 +++-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 127 +++++++++++++++++++++-
drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h | 34 ++++++
4 files changed, 242 insertions(+), 49 deletions(-)
--
1.8.3.1
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2020-10-12 21:48 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-05 18:08 [PATCH net-next v2 0/9] bnxt_en: Updates for net-next Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 1/9] bnxt_en: Update to Firmware 1.2.2 spec Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 2/9] bnxt_en: Improve flow control autoneg with Firmware 1.2.1 interface Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 3/9] bnxt_en: Add basic EEE support Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 4/9] bnxt_en: Add EEE setup code Michael Chan
2016-04-05 18:08 ` [PATCH net-next v2 5/9] bnxt_en: Add get_eee() and set_eee() ethtool support Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 6/9] bnxt_en: Set async event bits when registering with the firmware Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 7/9] bnxt_en: Add unsupported SFP+ module warnings Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 8/9] bnxt_en: Check for valid forced speed during ethtool -s Michael Chan
2016-04-05 18:09 ` [PATCH net-next v2 9/9] bnxt_en: Improve ethtool .get_settings() Michael Chan
2016-04-05 20:15 ` [PATCH net-next v2 0/9] bnxt_en: Updates for net-next David Miller
2016-05-15 7:04 [PATCH net-next v2 0/9] bnxt_en: updates " Michael Chan
2016-05-15 17:36 ` David Miller
2020-10-12 9:10 [PATCH net-next v2 0/9] bnxt_en: Updates " Michael Chan
2020-10-12 21:48 ` Jakub Kicinski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).