netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tom Lendacky <thomas.lendacky@amd.com>
To: netdev@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Subject: [PATCH net-next 07/12] amd-xgbe: Prepare for ethtool set-channel support
Date: Mon, 21 May 2018 16:59:24 -0500	[thread overview]
Message-ID: <20180521215924.8135.12033.stgit@tlendack-t1.amdoffice.net> (raw)
In-Reply-To: <20180521215818.8135.83100.stgit@tlendack-t1.amdoffice.net>

In order to support being able to dynamically set/change the number of
Rx and Tx channels, update the code to:
 - Move alloc and free of device memory into callable functions
 - Move setting of the real number of Rx and Tx channels to device startup
 - Move mapping of the RSS channels to device startup

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c  |  108 ++++++++++++++++++-----------
 drivers/net/ethernet/amd/xgbe/xgbe-main.c |   20 -----
 2 files changed, 68 insertions(+), 60 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
index 2646c08..397e3a0 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -1312,14 +1312,72 @@ int xgbe_powerup(struct net_device *netdev, unsigned int caller)
 	return 0;
 }
 
+static void xgbe_free_memory(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_desc_if *desc_if = &pdata->desc_if;
+
+	/* Free the ring descriptors and buffers */
+	desc_if->free_ring_resources(pdata);
+
+	/* Free the channel and ring structures */
+	xgbe_free_channels(pdata);
+}
+
+static int xgbe_alloc_memory(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_desc_if *desc_if = &pdata->desc_if;
+	struct net_device *netdev = pdata->netdev;
+	int ret;
+
+	/* Calculate the Rx buffer size before allocating rings */
+	pdata->rx_buf_size = xgbe_calc_rx_buf_size(netdev, netdev->mtu);
+
+	/* Allocate the channel and ring structures */
+	ret = xgbe_alloc_channels(pdata);
+	if (ret)
+		return ret;
+
+	/* Allocate the ring descriptors and buffers */
+	ret = desc_if->alloc_ring_resources(pdata);
+	if (ret)
+		goto err_channels;
+
+	/* Initialize the service and Tx timers */
+	xgbe_init_timers(pdata);
+
+	return 0;
+
+err_channels:
+	xgbe_free_memory(pdata);
+
+	return ret;
+}
+
 static int xgbe_start(struct xgbe_prv_data *pdata)
 {
 	struct xgbe_hw_if *hw_if = &pdata->hw_if;
 	struct xgbe_phy_if *phy_if = &pdata->phy_if;
 	struct net_device *netdev = pdata->netdev;
+	unsigned int i;
 	int ret;
 
-	DBGPR("-->xgbe_start\n");
+	/* Set the number of queues */
+	ret = netif_set_real_num_tx_queues(netdev, pdata->tx_ring_count);
+	if (ret) {
+		netdev_err(netdev, "error setting real tx queue count\n");
+		return ret;
+	}
+
+	ret = netif_set_real_num_rx_queues(netdev, pdata->rx_ring_count);
+	if (ret) {
+		netdev_err(netdev, "error setting real rx queue count\n");
+		return ret;
+	}
+
+	/* Set RSS lookup table data for programming */
+	for (i = 0; i < XGBE_RSS_MAX_TABLE_SIZE; i++)
+		XGMAC_SET_BITS(pdata->rss_table[i], MAC_RSSDR, DMCH,
+			       i % pdata->rx_ring_count);
 
 	ret = hw_if->init(pdata);
 	if (ret)
@@ -1347,8 +1405,6 @@ static int xgbe_start(struct xgbe_prv_data *pdata)
 
 	clear_bit(XGBE_STOPPED, &pdata->dev_state);
 
-	DBGPR("<--xgbe_start\n");
-
 	return 0;
 
 err_irqs:
@@ -1823,11 +1879,8 @@ static void xgbe_packet_info(struct xgbe_prv_data *pdata,
 static int xgbe_open(struct net_device *netdev)
 {
 	struct xgbe_prv_data *pdata = netdev_priv(netdev);
-	struct xgbe_desc_if *desc_if = &pdata->desc_if;
 	int ret;
 
-	DBGPR("-->xgbe_open\n");
-
 	/* Create the various names based on netdev name */
 	snprintf(pdata->an_name, sizeof(pdata->an_name) - 1, "%s-pcs",
 		 netdev_name(netdev));
@@ -1872,43 +1925,25 @@ static int xgbe_open(struct net_device *netdev)
 		goto err_sysclk;
 	}
 
-	/* Calculate the Rx buffer size before allocating rings */
-	ret = xgbe_calc_rx_buf_size(netdev, netdev->mtu);
-	if (ret < 0)
-		goto err_ptpclk;
-	pdata->rx_buf_size = ret;
-
-	/* Allocate the channel and ring structures */
-	ret = xgbe_alloc_channels(pdata);
-	if (ret)
-		goto err_ptpclk;
-
-	/* Allocate the ring descriptors and buffers */
-	ret = desc_if->alloc_ring_resources(pdata);
-	if (ret)
-		goto err_channels;
-
 	INIT_WORK(&pdata->service_work, xgbe_service);
 	INIT_WORK(&pdata->restart_work, xgbe_restart);
 	INIT_WORK(&pdata->stopdev_work, xgbe_stopdev);
 	INIT_WORK(&pdata->tx_tstamp_work, xgbe_tx_tstamp);
-	xgbe_init_timers(pdata);
+
+	ret = xgbe_alloc_memory(pdata);
+	if (ret)
+		goto err_ptpclk;
 
 	ret = xgbe_start(pdata);
 	if (ret)
-		goto err_rings;
+		goto err_mem;
 
 	clear_bit(XGBE_DOWN, &pdata->dev_state);
 
-	DBGPR("<--xgbe_open\n");
-
 	return 0;
 
-err_rings:
-	desc_if->free_ring_resources(pdata);
-
-err_channels:
-	xgbe_free_channels(pdata);
+err_mem:
+	xgbe_free_memory(pdata);
 
 err_ptpclk:
 	clk_disable_unprepare(pdata->ptpclk);
@@ -1928,18 +1963,11 @@ static int xgbe_open(struct net_device *netdev)
 static int xgbe_close(struct net_device *netdev)
 {
 	struct xgbe_prv_data *pdata = netdev_priv(netdev);
-	struct xgbe_desc_if *desc_if = &pdata->desc_if;
-
-	DBGPR("-->xgbe_close\n");
 
 	/* Stop the device */
 	xgbe_stop(pdata);
 
-	/* Free the ring descriptors and buffers */
-	desc_if->free_ring_resources(pdata);
-
-	/* Free the channel and ring structures */
-	xgbe_free_channels(pdata);
+	xgbe_free_memory(pdata);
 
 	/* Disable the clocks */
 	clk_disable_unprepare(pdata->ptpclk);
@@ -1953,8 +1981,6 @@ static int xgbe_close(struct net_device *netdev)
 
 	set_bit(XGBE_DOWN, &pdata->dev_state);
 
-	DBGPR("<--xgbe_close\n");
-
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-main.c b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
index 441d0973..b41f236 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
@@ -265,7 +265,6 @@ int xgbe_config_netdev(struct xgbe_prv_data *pdata)
 {
 	struct net_device *netdev = pdata->netdev;
 	struct device *dev = pdata->dev;
-	unsigned int i;
 	int ret;
 
 	netdev->irq = pdata->dev_irq;
@@ -324,26 +323,9 @@ int xgbe_config_netdev(struct xgbe_prv_data *pdata)
 				pdata->tx_ring_count, pdata->rx_ring_count);
 	}
 
-	/* Set the number of queues */
-	ret = netif_set_real_num_tx_queues(netdev, pdata->tx_ring_count);
-	if (ret) {
-		dev_err(dev, "error setting real tx queue count\n");
-		return ret;
-	}
-
-	ret = netif_set_real_num_rx_queues(netdev, pdata->rx_ring_count);
-	if (ret) {
-		dev_err(dev, "error setting real rx queue count\n");
-		return ret;
-	}
-
-	/* Initialize RSS hash key and lookup table */
+	/* Initialize RSS hash key */
 	netdev_rss_key_fill(pdata->rss_key, sizeof(pdata->rss_key));
 
-	for (i = 0; i < XGBE_RSS_MAX_TABLE_SIZE; i++)
-		XGMAC_SET_BITS(pdata->rss_table[i], MAC_RSSDR, DMCH,
-			       i % pdata->rx_ring_count);
-
 	XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, IP2TE, 1);
 	XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, TCP4TE, 1);
 	XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, UDP4TE, 1);

  parent reply	other threads:[~2018-05-21 21:59 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-21 21:58 [PATCH net-next 00/12] amd-xgbe: AMD XGBE driver updates 2018-05-21 Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 01/12] amd-xgbe: Fix debug output of max channel counts Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 02/12] amd-xgbe: Read and save the port property registers during probe Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 03/12] amd-xgbe: Remove use of comm_owned field Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 04/12] amd-xgbe: Remove field that indicates SFP diagnostic support Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 05/12] amd-xgbe: Add ethtool support to retrieve SFP module info Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 06/12] amd-xgbe: Add ethtool show/set ring parameter support Tom Lendacky
2018-05-21 21:59 ` Tom Lendacky [this message]
2018-05-21 21:59 ` [PATCH net-next 08/12] amd-xgbe: Add ethtool show/set channels support Tom Lendacky
2018-05-22  5:35   ` Jakub Kicinski
2018-05-22 13:24     ` Tom Lendacky
2018-05-22 13:29       ` Edward Cree
2018-05-22 15:37         ` Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 09/12] amd-xgbe: Always attempt link training in KR mode Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 10/12] amd-xgbe: Advertise FEC support with the KR re-driver Tom Lendacky
2018-05-21 22:00 ` [PATCH net-next 11/12] amd-xgbe: Update the BelFuse quirk to support SGMII Tom Lendacky
2018-05-21 22:00 ` [PATCH net-next 12/12] amd-xgbe: Improve SFP 100Mbps auto-negotiation Tom Lendacky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180521215924.8135.12033.stgit@tlendack-t1.amdoffice.net \
    --to=thomas.lendacky@amd.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).