From: Tom Lendacky <thomas.lendacky@amd.com>
To: netdev@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Subject: [PATCH net-next 09/12] amd-xgbe: Always attempt link training in KR mode
Date: Mon, 21 May 2018 16:59:46 -0500 [thread overview]
Message-ID: <20180521215946.8135.2887.stgit@tlendack-t1.amdoffice.net> (raw)
In-Reply-To: <20180521215818.8135.83100.stgit@tlendack-t1.amdoffice.net>
Link training is always attempted when in KR mode, but the code is
structured to check if link training has been enabled before attempting
to perform it. Since that check will always be true, simplify the code
to always enable and start link training during KR auto-negotiation.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 69 +++++++----------------------
1 file changed, 16 insertions(+), 53 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
index 9c39c72..450b89c 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
@@ -216,31 +216,8 @@ static void xgbe_an_clear_interrupts_all(struct xgbe_prv_data *pdata)
xgbe_an37_clear_interrupts(pdata);
}
-static void xgbe_an73_enable_kr_training(struct xgbe_prv_data *pdata)
-{
- unsigned int reg;
-
- reg = XMDIO_READ(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
-
- reg |= XGBE_KR_TRAINING_ENABLE;
- XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, reg);
-}
-
-static void xgbe_an73_disable_kr_training(struct xgbe_prv_data *pdata)
-{
- unsigned int reg;
-
- reg = XMDIO_READ(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
-
- reg &= ~XGBE_KR_TRAINING_ENABLE;
- XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, reg);
-}
-
static void xgbe_kr_mode(struct xgbe_prv_data *pdata)
{
- /* Enable KR training */
- xgbe_an73_enable_kr_training(pdata);
-
/* Set MAC to 10G speed */
pdata->hw_if.set_speed(pdata, SPEED_10000);
@@ -250,9 +227,6 @@ static void xgbe_kr_mode(struct xgbe_prv_data *pdata)
static void xgbe_kx_2500_mode(struct xgbe_prv_data *pdata)
{
- /* Disable KR training */
- xgbe_an73_disable_kr_training(pdata);
-
/* Set MAC to 2.5G speed */
pdata->hw_if.set_speed(pdata, SPEED_2500);
@@ -262,9 +236,6 @@ static void xgbe_kx_2500_mode(struct xgbe_prv_data *pdata)
static void xgbe_kx_1000_mode(struct xgbe_prv_data *pdata)
{
- /* Disable KR training */
- xgbe_an73_disable_kr_training(pdata);
-
/* Set MAC to 1G speed */
pdata->hw_if.set_speed(pdata, SPEED_1000);
@@ -278,9 +249,6 @@ static void xgbe_sfi_mode(struct xgbe_prv_data *pdata)
if (pdata->kr_redrv)
return xgbe_kr_mode(pdata);
- /* Disable KR training */
- xgbe_an73_disable_kr_training(pdata);
-
/* Set MAC to 10G speed */
pdata->hw_if.set_speed(pdata, SPEED_10000);
@@ -290,9 +258,6 @@ static void xgbe_sfi_mode(struct xgbe_prv_data *pdata)
static void xgbe_x_mode(struct xgbe_prv_data *pdata)
{
- /* Disable KR training */
- xgbe_an73_disable_kr_training(pdata);
-
/* Set MAC to 1G speed */
pdata->hw_if.set_speed(pdata, SPEED_1000);
@@ -302,9 +267,6 @@ static void xgbe_x_mode(struct xgbe_prv_data *pdata)
static void xgbe_sgmii_1000_mode(struct xgbe_prv_data *pdata)
{
- /* Disable KR training */
- xgbe_an73_disable_kr_training(pdata);
-
/* Set MAC to 1G speed */
pdata->hw_if.set_speed(pdata, SPEED_1000);
@@ -314,9 +276,6 @@ static void xgbe_sgmii_1000_mode(struct xgbe_prv_data *pdata)
static void xgbe_sgmii_100_mode(struct xgbe_prv_data *pdata)
{
- /* Disable KR training */
- xgbe_an73_disable_kr_training(pdata);
-
/* Set MAC to 1G speed */
pdata->hw_if.set_speed(pdata, SPEED_1000);
@@ -425,6 +384,12 @@ static void xgbe_an73_set(struct xgbe_prv_data *pdata, bool enable,
{
unsigned int reg;
+ /* Disable KR training for now */
+ reg = XMDIO_READ(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
+ reg &= ~XGBE_KR_TRAINING_ENABLE;
+ XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, reg);
+
+ /* Update AN settings */
reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_CTRL1);
reg &= ~MDIO_AN_CTRL1_ENABLE;
@@ -522,21 +487,19 @@ static enum xgbe_an xgbe_an73_tx_training(struct xgbe_prv_data *pdata,
XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FECCTRL, reg);
/* Start KR training */
- reg = XMDIO_READ(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
- if (reg & XGBE_KR_TRAINING_ENABLE) {
- if (pdata->phy_if.phy_impl.kr_training_pre)
- pdata->phy_if.phy_impl.kr_training_pre(pdata);
+ if (pdata->phy_if.phy_impl.kr_training_pre)
+ pdata->phy_if.phy_impl.kr_training_pre(pdata);
- reg |= XGBE_KR_TRAINING_START;
- XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL,
- reg);
+ reg = XMDIO_READ(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
+ reg |= XGBE_KR_TRAINING_ENABLE;
+ reg |= XGBE_KR_TRAINING_START;
+ XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, reg);
- netif_dbg(pdata, link, pdata->netdev,
- "KR training initiated\n");
+ netif_dbg(pdata, link, pdata->netdev,
+ "KR training initiated\n");
- if (pdata->phy_if.phy_impl.kr_training_post)
- pdata->phy_if.phy_impl.kr_training_post(pdata);
- }
+ if (pdata->phy_if.phy_impl.kr_training_post)
+ pdata->phy_if.phy_impl.kr_training_post(pdata);
return XGBE_AN_PAGE_RECEIVED;
}
next prev parent reply other threads:[~2018-05-21 21:59 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-21 21:58 [PATCH net-next 00/12] amd-xgbe: AMD XGBE driver updates 2018-05-21 Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 01/12] amd-xgbe: Fix debug output of max channel counts Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 02/12] amd-xgbe: Read and save the port property registers during probe Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 03/12] amd-xgbe: Remove use of comm_owned field Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 04/12] amd-xgbe: Remove field that indicates SFP diagnostic support Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 05/12] amd-xgbe: Add ethtool support to retrieve SFP module info Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 06/12] amd-xgbe: Add ethtool show/set ring parameter support Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 07/12] amd-xgbe: Prepare for ethtool set-channel support Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 08/12] amd-xgbe: Add ethtool show/set channels support Tom Lendacky
2018-05-22 5:35 ` Jakub Kicinski
2018-05-22 13:24 ` Tom Lendacky
2018-05-22 13:29 ` Edward Cree
2018-05-22 15:37 ` Tom Lendacky
2018-05-21 21:59 ` Tom Lendacky [this message]
2018-05-21 21:59 ` [PATCH net-next 10/12] amd-xgbe: Advertise FEC support with the KR re-driver Tom Lendacky
2018-05-21 22:00 ` [PATCH net-next 11/12] amd-xgbe: Update the BelFuse quirk to support SGMII Tom Lendacky
2018-05-21 22:00 ` [PATCH net-next 12/12] amd-xgbe: Improve SFP 100Mbps auto-negotiation Tom Lendacky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180521215946.8135.2887.stgit@tlendack-t1.amdoffice.net \
--to=thomas.lendacky@amd.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).