[PATCH AUTOSEL 4.9 07/35] xfrm: Fix bucket count reported to userspace

[PATCH AUTOSEL 4.9 07/35] xfrm: Fix bucket count reported to userspace

[Sasha Levin]

From: Benjamin Poirier <bpoirier@suse.com>

[ Upstream commit ca92e173ab34a4f7fc4128bd372bd96f1af6f507 ]

sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the
hash mask.

Fixes: 28d8909bc790 ("[XFRM]: Export SAD info.")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_state.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 71a94e549301..884f2136b34b 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -641,7 +641,7 @@ void xfrm_sad_getinfo(struct net *net, struct xfrmk_sadinfo *si)
 {
 	spin_lock_bh(&net->xfrm.xfrm_state_lock);
 	si->sadcnt = net->xfrm.state_num;
-	si->sadhcnt = net->xfrm.state_hmask;
+	si->sadhcnt = net->xfrm.state_hmask + 1;
 	si->sadhmcnt = xfrm_state_hashmax;
 	spin_unlock_bh(&net->xfrm.xfrm_state_lock);
 }
-- 
2.19.1

[PATCH AUTOSEL 4.9 08/35] netfilter: seqadj: re-load tcp header pointer after possible head reallocation

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 530aad77010b81526586dfc09130ec875cd084e4 ]

When adjusting sack block sequence numbers, skb_make_writable() gets
called to make sure tcp options are all in the linear area, and buffer
is not shared.

This can cause tcp header pointer to get reallocated, so we must
reaload it to avoid memory corruption.

This bug pre-dates git history.

Reported-by: Neel Mehta <nmehta@google.com>
Reported-by: Shane Huntley <shuntley@google.com>
Reported-by: Heather Adkins <argv@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_seqadj.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_conntrack_seqadj.c b/net/netfilter/nf_conntrack_seqadj.c
index ef7063eced7c..dad08b9eaf62 100644
--- a/net/netfilter/nf_conntrack_seqadj.c
+++ b/net/netfilter/nf_conntrack_seqadj.c
@@ -115,12 +115,12 @@ static void nf_ct_sack_block_adjust(struct sk_buff *skb,
 /* TCP SACK sequence number adjustment */
 static unsigned int nf_ct_sack_adjust(struct sk_buff *skb,
 				      unsigned int protoff,
-				      struct tcphdr *tcph,
 				      struct nf_conn *ct,
 				      enum ip_conntrack_info ctinfo)
 {
-	unsigned int dir, optoff, optend;
+	struct tcphdr *tcph = (void *)skb->data + protoff;
 	struct nf_conn_seqadj *seqadj = nfct_seqadj(ct);
+	unsigned int dir, optoff, optend;
 
 	optoff = protoff + sizeof(struct tcphdr);
 	optend = protoff + tcph->doff * 4;
@@ -128,6 +128,7 @@ static unsigned int nf_ct_sack_adjust(struct sk_buff *skb,
 	if (!skb_make_writable(skb, optend))
 		return 0;
 
+	tcph = (void *)skb->data + protoff;
 	dir = CTINFO2DIR(ctinfo);
 
 	while (optoff < optend) {
@@ -207,7 +208,7 @@ int nf_ct_seq_adjust(struct sk_buff *skb,
 		 ntohl(newack));
 	tcph->ack_seq = newack;
 
-	res = nf_ct_sack_adjust(skb, protoff, tcph, ct, ctinfo);
+	res = nf_ct_sack_adjust(skb, protoff, ct, ctinfo);
 out:
 	spin_unlock_bh(&ct->lock);
 
-- 
2.19.1

[PATCH AUTOSEL 4.9 11/35] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data

[Sasha Levin]

From: Hui Peng <benquike@gmail.com>

[ Upstream commit 5146f95df782b0ac61abde36567e718692725c89 ]

The function hso_probe reads if_num from the USB device (as an u8) and uses
it without a length check to index an array, resulting in an OOB memory read
in hso_probe or hso_get_config_data.

Add a length check for both locations and updated hso_probe to bail on
error.

This issue has been assigned CVE-2018-19985.

Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/hso.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index e7b516342678..66ae647b712e 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2808,6 +2808,12 @@ static int hso_get_config_data(struct usb_interface *interface)
 		return -EIO;
 	}
 
+	/* check if we have a valid interface */
+	if (if_num > 16) {
+		kfree(config_data);
+		return -EINVAL;
+	}
+
 	switch (config_data[if_num]) {
 	case 0x0:
 		result = 0;
@@ -2878,10 +2884,18 @@ static int hso_probe(struct usb_interface *interface,
 
 	/* Get the interface/port specification from either driver_info or from
 	 * the device itself */
-	if (id->driver_info)
+	if (id->driver_info) {
+		/* if_num is controlled by the device, driver_info is a 0 terminated
+		 * array. Make sure, the access is in bounds! */
+		for (i = 0; i <= if_num; ++i)
+			if (((u32 *)(id->driver_info))[i] == 0)
+				goto exit;
 		port_spec = ((u32 *)(id->driver_info))[if_num];
-	else
+	} else {
 		port_spec = hso_get_config_data(interface);
+		if (port_spec < 0)
+			goto exit;
+	}
 
 	/* Check if we need to switch to alt interfaces prior to port
 	 * configuration */
-- 
2.19.1

[PATCH AUTOSEL 4.9 12/35] netfilter: ipset: do not call ipset_nest_end after nla_nest_cancel

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 708abf74dd87f8640871b814faa195fb5970b0e3 ]

In the error handling block, nla_nest_cancel(skb, atd) is called to
cancel the nest operation. But then, ipset_nest_end(skb, atd) is
unexpected called to end the nest operation. This patch calls the
ipset_nest_end only on the branch that nla_nest_cancel is not called.

Fixes: 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipset/ip_set_list_set.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/ipset/ip_set_list_set.c b/net/netfilter/ipset/ip_set_list_set.c
index a2a89e4e0a14..e82157285d34 100644
--- a/net/netfilter/ipset/ip_set_list_set.c
+++ b/net/netfilter/ipset/ip_set_list_set.c
@@ -518,8 +518,8 @@ list_set_list(const struct ip_set *set,
 		ret = -EMSGSIZE;
 	} else {
 		cb->args[IPSET_CB_ARG0] = i;
+		ipset_nest_end(skb, atd);
 	}
-	ipset_nest_end(skb, atd);
 out:
 	rcu_read_unlock();
 	return ret;
-- 
2.19.1

[PATCH AUTOSEL 4.9 13/35] bnx2x: Clear fip MAC when fcoe offload support is disabled

[Sasha Levin]

From: Sudarsana Reddy Kalluru <sudarsana.kalluru@cavium.com>

[ Upstream commit bbf666c1af916ed74795493c564df6fad462cc80 ]

On some customer setups it was observed that shmem contains a non-zero fip
MAC for 57711 which would lead to enabling of SW FCoE.
Add a software workaround to clear the bad fip mac address if no FCoE
connections are supported.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 54dab4eac804..77f53e4122c3 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -11733,8 +11733,10 @@ static void bnx2x_get_fcoe_info(struct bnx2x *bp)
 	 * If maximum allowed number of connections is zero -
 	 * disable the feature.
 	 */
-	if (!bp->cnic_eth_dev.max_fcoe_conn)
+	if (!bp->cnic_eth_dev.max_fcoe_conn) {
 		bp->flags |= NO_FCOE_FLAG;
+		eth_zero_addr(bp->fip_mac);
+	}
 }
 
 static void bnx2x_get_cnic_info(struct bnx2x *bp)
-- 
2.19.1

[PATCH AUTOSEL 4.9 14/35] bnx2x: Remove configured vlans as part of unload sequence.

[Sasha Levin]

From: Sudarsana Reddy Kalluru <sudarsana.kalluru@cavium.com>

[ Upstream commit 04f05230c5c13b1384f66f5186a68d7499e34622 ]

Vlans are not getting removed when drivers are unloaded. The recent storm
firmware versions had added safeguards against re-configuring an already
configured vlan. As a result, PF inner reload flows (e.g., mtu change)
might trigger an assertion.
This change is going to remove vlans (same as we do for MACs) when doing
a chip cleanup during unload.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnx2x/bnx2x_main.c  | 34 +++++++++++++++----
 .../net/ethernet/broadcom/bnx2x/bnx2x_sp.h    |  4 ++-
 2 files changed, 30 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 77f53e4122c3..4c412c52bcde 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8462,6 +8462,7 @@ int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan,
 	/* Fill a user request section if needed */
 	if (!test_bit(RAMROD_CONT, ramrod_flags)) {
 		ramrod_param.user_req.u.vlan.vlan = vlan;
+		__set_bit(BNX2X_VLAN, &ramrod_param.user_req.vlan_mac_flags);
 		/* Set the command: ADD or DEL */
 		if (set)
 			ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
@@ -8482,6 +8483,27 @@ int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan,
 	return rc;
 }
 
+static int bnx2x_del_all_vlans(struct bnx2x *bp)
+{
+	struct bnx2x_vlan_mac_obj *vlan_obj = &bp->sp_objs[0].vlan_obj;
+	unsigned long ramrod_flags = 0, vlan_flags = 0;
+	struct bnx2x_vlan_entry *vlan;
+	int rc;
+
+	__set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+	__set_bit(BNX2X_VLAN, &vlan_flags);
+	rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_flags, &ramrod_flags);
+	if (rc)
+		return rc;
+
+	/* Mark that hw forgot all entries */
+	list_for_each_entry(vlan, &bp->vlan_reg, link)
+		vlan->hw = false;
+	bp->vlan_cnt = 0;
+
+	return 0;
+}
+
 int bnx2x_del_all_macs(struct bnx2x *bp,
 		       struct bnx2x_vlan_mac_obj *mac_obj,
 		       int mac_type, bool wait_for_comp)
@@ -9320,6 +9342,11 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link)
 		BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n",
 			  rc);
 
+	/* Remove all currently configured VLANs */
+	rc = bnx2x_del_all_vlans(bp);
+	if (rc < 0)
+		BNX2X_ERR("Failed to delete all VLANs\n");
+
 	/* Disable LLH */
 	if (!CHIP_IS_E1(bp))
 		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
@@ -13007,13 +13034,6 @@ static void bnx2x_vlan_configure(struct bnx2x *bp, bool set_rx_mode)
 
 int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp)
 {
-	struct bnx2x_vlan_entry *vlan;
-
-	/* The hw forgot all entries after reload */
-	list_for_each_entry(vlan, &bp->vlan_reg, link)
-		vlan->hw = false;
-	bp->vlan_cnt = 0;
-
 	/* Don't set rx mode here. Our caller will do it. */
 	bnx2x_vlan_configure(bp, false);
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
index 0bf2fd470819..7a6e82db4231 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
@@ -265,6 +265,7 @@ enum {
 	BNX2X_ETH_MAC,
 	BNX2X_ISCSI_ETH_MAC,
 	BNX2X_NETQ_ETH_MAC,
+	BNX2X_VLAN,
 	BNX2X_DONT_CONSUME_CAM_CREDIT,
 	BNX2X_DONT_CONSUME_CAM_CREDIT_DEST,
 };
@@ -272,7 +273,8 @@ enum {
 #define BNX2X_VLAN_MAC_CMP_MASK	(1 << BNX2X_UC_LIST_MAC | \
 				 1 << BNX2X_ETH_MAC | \
 				 1 << BNX2X_ISCSI_ETH_MAC | \
-				 1 << BNX2X_NETQ_ETH_MAC)
+				 1 << BNX2X_NETQ_ETH_MAC | \
+				 1 << BNX2X_VLAN)
 #define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \
 	((flags) & BNX2X_VLAN_MAC_CMP_MASK)
 
-- 
2.19.1

[PATCH AUTOSEL 4.9 15/35] bnx2x: Send update-svid ramrod with retry/poll flags enabled

[Sasha Levin]

From: Sudarsana Reddy Kalluru <sudarsana.kalluru@cavium.com>

[ Upstream commit 9061193c4ee065d3240fde06767c2e06ec61decc ]

Driver sends update-SVID ramrod in the MFW notification path.
If there is a pending ramrod, driver doesn't retry the command
and storm firmware will never be updated with the SVID value.
The patch adds changes to send update-svid ramrod in process context with
retry/poll flags set.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h      |  1 +
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 +++++++++-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index d5e4c42662b6..162b809422f4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1278,6 +1278,7 @@ enum sp_rtnl_flag {
 	BNX2X_SP_RTNL_TX_STOP,
 	BNX2X_SP_RTNL_GET_DRV_VERSION,
 	BNX2X_SP_RTNL_CHANGE_UDP_PORT,
+	BNX2X_SP_RTNL_UPDATE_SVID,
 };
 
 enum bnx2x_iov_flag {
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 4c412c52bcde..0352089d0d98 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -2925,6 +2925,10 @@ static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp)
 	func_params.f_obj = &bp->func_obj;
 	func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
 
+	/* Prepare parameters for function state transitions */
+	__set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags);
+	__set_bit(RAMROD_RETRY, &func_params.ramrod_flags);
+
 	if (IS_MF_UFP(bp) || IS_MF_BD(bp)) {
 		int func = BP_ABS_FUNC(bp);
 		u32 val;
@@ -4301,7 +4305,8 @@ static void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
 				bnx2x_handle_eee_event(bp);
 
 			if (val & DRV_STATUS_OEM_UPDATE_SVID)
-				bnx2x_handle_update_svid_cmd(bp);
+				bnx2x_schedule_sp_rtnl(bp,
+					BNX2X_SP_RTNL_UPDATE_SVID, 0);
 
 			if (bp->link_vars.periodic_flags &
 			    PERIODIC_FLAGS_LINK_EVENT) {
@@ -10369,6 +10374,9 @@ static void bnx2x_sp_rtnl_task(struct work_struct *work)
 			       &bp->sp_rtnl_state))
 		bnx2x_update_mng_version(bp);
 
+	if (test_and_clear_bit(BNX2X_SP_RTNL_UPDATE_SVID, &bp->sp_rtnl_state))
+		bnx2x_handle_update_svid_cmd(bp);
+
 	if (test_and_clear_bit(BNX2X_SP_RTNL_CHANGE_UDP_PORT,
 			       &bp->sp_rtnl_state)) {
 		if (bnx2x_udp_port_update(bp)) {
-- 
2.19.1

[PATCH AUTOSEL 4.9 18/35] drivers: net: xgene: Remove unnecessary forward declarations

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 2ab4c3426c0cf711d7147e3f559638e4ab88960e ]

Clang warns:

drivers/net/ethernet/apm/xgene/xgene_enet_main.c:33:36: warning:
tentative array definition assumed to have one element
static const struct acpi_device_id xgene_enet_acpi_match[];
                                   ^
1 warning generated.

Both xgene_enet_acpi_match and xgene_enet_of_match are defined before
their uses at the bottom of the file so this is unnecessary. When
CONFIG_ACPI is disabled, ACPI_PTR becomes NULL so xgene_enet_acpi_match
doesn't need to be defined.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
index fca2e428cd86..de4b5d267c30 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
@@ -29,9 +29,6 @@
 #define RES_RING_CSR	1
 #define RES_RING_CMD	2
 
-static const struct of_device_id xgene_enet_of_match[];
-static const struct acpi_device_id xgene_enet_acpi_match[];
-
 static void xgene_enet_init_bufpool(struct xgene_enet_desc_ring *buf_pool)
 {
 	struct xgene_enet_raw_desc16 *raw_desc;
-- 
2.19.1

[PATCH AUTOSEL 4.9 19/35] w90p910_ether: remove incorrect __init annotation

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 51367e423c6501a26e67d91a655d2bc892303462 ]

The get_mac_address() function is normally inline, but when it is
not, we get a warning that this configuration is broken:

WARNING: vmlinux.o(.text+0x4aff00): Section mismatch in reference from the function w90p910_ether_setup() to the function .init.text:get_mac_address()
The function w90p910_ether_setup() references
the function __init get_mac_address().
This is often because w90p910_ether_setup lacks a __init

Remove the __init to make it always do the right thing.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/nuvoton/w90p910_ether.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/nuvoton/w90p910_ether.c b/drivers/net/ethernet/nuvoton/w90p910_ether.c
index 712d8bcb7d8c..a2960169a784 100644
--- a/drivers/net/ethernet/nuvoton/w90p910_ether.c
+++ b/drivers/net/ethernet/nuvoton/w90p910_ether.c
@@ -918,7 +918,7 @@ static const struct net_device_ops w90p910_ether_netdev_ops = {
 	.ndo_change_mtu		= eth_change_mtu,
 };
 
-static void __init get_mac_address(struct net_device *dev)
+static void get_mac_address(struct net_device *dev)
 {
 	struct w90p910_ether *ether = netdev_priv(dev);
 	struct platform_device *pdev;
-- 
2.19.1

[PATCH AUTOSEL 4.9 20/35] net: hns: Incorrect offset address used for some registers.

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 4e1d4be681b2c26fd874adbf584bf034573ac45d ]

According to the hip06 Datasheet:
1. The offset of INGRESS_SW_VLAN_TAG_DISC should be 0x1A00+4*all_chn_num
2. The offset of INGRESS_IN_DATA_STP_DISC should be 0x1A50+4*all_chn_num

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
index 8ea3d95fa483..e25206540fd7 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
@@ -2163,9 +2163,9 @@ void hns_dsaf_update_stats(struct dsaf_device *dsaf_dev, u32 node_num)
 		DSAF_INODE_LOCAL_ADDR_FALSE_NUM_0_REG + 0x80 * (u64)node_num);
 
 	hw_stats->vlan_drop += dsaf_read_dev(dsaf_dev,
-		DSAF_INODE_SW_VLAN_TAG_DISC_0_REG + 0x80 * (u64)node_num);
+		DSAF_INODE_SW_VLAN_TAG_DISC_0_REG + 4 * (u64)node_num);
 	hw_stats->stp_drop += dsaf_read_dev(dsaf_dev,
-		DSAF_INODE_IN_DATA_STP_DISC_0_REG + 0x80 * (u64)node_num);
+		DSAF_INODE_IN_DATA_STP_DISC_0_REG + 4 * (u64)node_num);
 
 	/* pfc pause frame statistics stored in dsaf inode*/
 	if ((node_num < DSAF_SERVICE_NW_NUM) && !is_ver1) {
-- 
2.19.1

[PATCH AUTOSEL 4.9 21/35] net: hns: All ports can not work when insmod hns ko after rmmod.

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 308c6cafde0147616da45e3a928adae55c428deb ]

There are two test cases:
1. Remove the 4 modules:hns_enet_drv/hns_dsaf/hnae/hns_mdio,
   and install them again, must use "ifconfig down/ifconfig up"
   command pair to bring port to work.

   This patch calls phy_stop function when init phy to fix this bug.

2. Remove the 2 modules:hns_enet_drv/hns_dsaf, and install them again,
   all ports can not use anymore, because of the phy devices register
   failed(phy devices already exists).

   Phy devices are registered when hns_dsaf installed, this patch
   removes them when hns_dsaf removed.

The two cases are sometimes related, fixing the second case also requires
fixing the first case, so fix them together.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 15 +++++++++++++++
 drivers/net/ethernet/hisilicon/hns/hns_enet.c     |  3 +++
 2 files changed, 18 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index ec8c738af726..b6429be2b8bd 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -724,6 +724,17 @@ static void hns_mac_register_phy(struct hns_mac_cb *mac_cb)
 			mac_cb->mac_id, addr);
 }
 
+static void hns_mac_remove_phydev(struct hns_mac_cb *mac_cb)
+{
+	if (!to_acpi_device_node(mac_cb->fw_port) || !mac_cb->phy_dev)
+		return;
+
+	phy_device_remove(mac_cb->phy_dev);
+	phy_device_free(mac_cb->phy_dev);
+
+	mac_cb->phy_dev = NULL;
+}
+
 #define MAC_MEDIA_TYPE_MAX_LEN		16
 
 static const struct {
@@ -1030,7 +1041,11 @@ void hns_mac_uninit(struct dsaf_device *dsaf_dev)
 	int max_port_num = hns_mac_get_max_port_num(dsaf_dev);
 
 	for (i = 0; i < max_port_num; i++) {
+		if (!dsaf_dev->mac_cb[i])
+			continue;
+
 		dsaf_dev->misc_op->cpld_reset_led(dsaf_dev->mac_cb[i]);
+		hns_mac_remove_phydev(dsaf_dev->mac_cb[i]);
 		dsaf_dev->mac_cb[i] = NULL;
 	}
 }
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 92ed6534ceae..12d90c04931b 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -1079,6 +1079,9 @@ int hns_nic_init_phy(struct net_device *ndev, struct hnae_handle *h)
 	if (h->phy_if == PHY_INTERFACE_MODE_XGMII)
 		phy_dev->autoneg = false;
 
+	if (h->phy_if == PHY_INTERFACE_MODE_SGMII)
+		phy_stop(phy_dev);
+
 	return 0;
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.9 22/35] net: hns: Some registers use wrong address according to the datasheet.

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 4ad26f117b6ea0f5d5f1592127bafb5ec65904d3 ]

According to the hip06 datasheet:
1.Six registers use wrong address:
  RCB_COM_SF_CFG_INTMASK_RING
  RCB_COM_SF_CFG_RING_STS
  RCB_COM_SF_CFG_RING
  RCB_COM_SF_CFG_INTMASK_BD
  RCB_COM_SF_CFG_BD_RINT_STS
  DSAF_INODE_VC1_IN_PKT_NUM_0_REG
2.The offset of DSAF_INODE_VC1_IN_PKT_NUM_0_REG should be
  0x103C + 0x80 * all_chn_num
3.The offset to show the value of DSAF_INODE_IN_DATA_STP_DISC_0_REG
  is wrong, so the value of DSAF_INODE_SW_VLAN_TAG_DISC_0_REG will be
  overwrite

These registers are only used in "ethtool -d", so that did not cause ndev
to misfunction.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/hisilicon/hns/hns_dsaf_main.c    | 242 +++++++++---------
 .../net/ethernet/hisilicon/hns/hns_dsaf_reg.h |  12 +-
 2 files changed, 127 insertions(+), 127 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
index e25206540fd7..5bb019d49409 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c
@@ -2282,237 +2282,237 @@ void hns_dsaf_get_regs(struct dsaf_device *ddev, u32 port, void *data)
 				DSAF_INODE_BD_ORDER_STATUS_0_REG + j * 4);
 		p[223 + i] = dsaf_read_dev(ddev,
 				DSAF_INODE_SW_VLAN_TAG_DISC_0_REG + j * 4);
-		p[224 + i] = dsaf_read_dev(ddev,
+		p[226 + i] = dsaf_read_dev(ddev,
 				DSAF_INODE_IN_DATA_STP_DISC_0_REG + j * 4);
 	}
 
-	p[227] = dsaf_read_dev(ddev, DSAF_INODE_GE_FC_EN_0_REG + port * 4);
+	p[229] = dsaf_read_dev(ddev, DSAF_INODE_GE_FC_EN_0_REG + port * 4);
 
 	for (i = 0; i < DSAF_INODE_NUM / DSAF_COMM_CHN; i++) {
 		j = i * DSAF_COMM_CHN + port;
-		p[228 + i] = dsaf_read_dev(ddev,
+		p[230 + i] = dsaf_read_dev(ddev,
 				DSAF_INODE_VC0_IN_PKT_NUM_0_REG + j * 4);
 	}
 
-	p[231] = dsaf_read_dev(ddev,
-		DSAF_INODE_VC1_IN_PKT_NUM_0_REG + port * 4);
+	p[233] = dsaf_read_dev(ddev,
+		DSAF_INODE_VC1_IN_PKT_NUM_0_REG + port * 0x80);
 
 	/* dsaf inode registers */
 	for (i = 0; i < HNS_DSAF_SBM_NUM(ddev) / DSAF_COMM_CHN; i++) {
 		j = i * DSAF_COMM_CHN + port;
-		p[232 + i] = dsaf_read_dev(ddev,
+		p[234 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_CFG_REG_0_REG + j * 0x80);
-		p[235 + i] = dsaf_read_dev(ddev,
+		p[237 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_BP_CFG_0_XGE_REG_0_REG + j * 0x80);
-		p[238 + i] = dsaf_read_dev(ddev,
+		p[240 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_BP_CFG_1_REG_0_REG + j * 0x80);
-		p[241 + i] = dsaf_read_dev(ddev,
+		p[243 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_BP_CFG_2_XGE_REG_0_REG + j * 0x80);
-		p[244 + i] = dsaf_read_dev(ddev,
+		p[246 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_FREE_CNT_0_0_REG + j * 0x80);
-		p[245 + i] = dsaf_read_dev(ddev,
+		p[249 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_FREE_CNT_1_0_REG + j * 0x80);
-		p[248 + i] = dsaf_read_dev(ddev,
+		p[252 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_BP_CNT_0_0_REG + j * 0x80);
-		p[251 + i] = dsaf_read_dev(ddev,
+		p[255 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_BP_CNT_1_0_REG + j * 0x80);
-		p[254 + i] = dsaf_read_dev(ddev,
+		p[258 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_BP_CNT_2_0_REG + j * 0x80);
-		p[257 + i] = dsaf_read_dev(ddev,
+		p[261 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_BP_CNT_3_0_REG + j * 0x80);
-		p[260 + i] = dsaf_read_dev(ddev,
+		p[264 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_INER_ST_0_REG + j * 0x80);
-		p[263 + i] = dsaf_read_dev(ddev,
+		p[267 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_MIB_REQ_FAILED_TC_0_REG + j * 0x80);
-		p[266 + i] = dsaf_read_dev(ddev,
+		p[270 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_INPORT_CNT_0_REG + j * 0x80);
-		p[269 + i] = dsaf_read_dev(ddev,
+		p[273 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_DROP_CNT_0_REG + j * 0x80);
-		p[272 + i] = dsaf_read_dev(ddev,
+		p[276 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_INF_OUTPORT_CNT_0_REG + j * 0x80);
-		p[275 + i] = dsaf_read_dev(ddev,
+		p[279 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_INPORT_TC0_CNT_0_REG + j * 0x80);
-		p[278 + i] = dsaf_read_dev(ddev,
+		p[282 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_INPORT_TC1_CNT_0_REG + j * 0x80);
-		p[281 + i] = dsaf_read_dev(ddev,
+		p[285 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_INPORT_TC2_CNT_0_REG + j * 0x80);
-		p[284 + i] = dsaf_read_dev(ddev,
+		p[288 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_INPORT_TC3_CNT_0_REG + j * 0x80);
-		p[287 + i] = dsaf_read_dev(ddev,
+		p[291 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_INPORT_TC4_CNT_0_REG + j * 0x80);
-		p[290 + i] = dsaf_read_dev(ddev,
+		p[294 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_INPORT_TC5_CNT_0_REG + j * 0x80);
-		p[293 + i] = dsaf_read_dev(ddev,
+		p[297 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_INPORT_TC6_CNT_0_REG + j * 0x80);
-		p[296 + i] = dsaf_read_dev(ddev,
+		p[300 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_INPORT_TC7_CNT_0_REG + j * 0x80);
-		p[299 + i] = dsaf_read_dev(ddev,
+		p[303 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_REQ_CNT_0_REG + j * 0x80);
-		p[302 + i] = dsaf_read_dev(ddev,
+		p[306 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_LNK_RELS_CNT_0_REG + j * 0x80);
-		p[305 + i] = dsaf_read_dev(ddev,
+		p[309 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_BP_CFG_3_REG_0_REG + j * 0x80);
-		p[308 + i] = dsaf_read_dev(ddev,
+		p[312 + i] = dsaf_read_dev(ddev,
 				DSAF_SBM_BP_CFG_4_REG_0_REG + j * 0x80);
 	}
 
 	/* dsaf onode registers */
 	for (i = 0; i < DSAF_XOD_NUM; i++) {
-		p[311 + i] = dsaf_read_dev(ddev,
+		p[315 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_ETS_TSA_TC0_TC3_CFG_0_REG + i * 0x90);
-		p[319 + i] = dsaf_read_dev(ddev,
+		p[323 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_ETS_TSA_TC4_TC7_CFG_0_REG + i * 0x90);
-		p[327 + i] = dsaf_read_dev(ddev,
+		p[331 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_ETS_BW_TC0_TC3_CFG_0_REG + i * 0x90);
-		p[335 + i] = dsaf_read_dev(ddev,
+		p[339 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_ETS_BW_TC4_TC7_CFG_0_REG + i * 0x90);
-		p[343 + i] = dsaf_read_dev(ddev,
+		p[347 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_ETS_BW_OFFSET_CFG_0_REG + i * 0x90);
-		p[351 + i] = dsaf_read_dev(ddev,
+		p[355 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_ETS_TOKEN_CFG_0_REG + i * 0x90);
 	}
 
-	p[359] = dsaf_read_dev(ddev, DSAF_XOD_PFS_CFG_0_0_REG + port * 0x90);
-	p[360] = dsaf_read_dev(ddev, DSAF_XOD_PFS_CFG_1_0_REG + port * 0x90);
-	p[361] = dsaf_read_dev(ddev, DSAF_XOD_PFS_CFG_2_0_REG + port * 0x90);
+	p[363] = dsaf_read_dev(ddev, DSAF_XOD_PFS_CFG_0_0_REG + port * 0x90);
+	p[364] = dsaf_read_dev(ddev, DSAF_XOD_PFS_CFG_1_0_REG + port * 0x90);
+	p[365] = dsaf_read_dev(ddev, DSAF_XOD_PFS_CFG_2_0_REG + port * 0x90);
 
 	for (i = 0; i < DSAF_XOD_BIG_NUM / DSAF_COMM_CHN; i++) {
 		j = i * DSAF_COMM_CHN + port;
-		p[362 + i] = dsaf_read_dev(ddev,
+		p[366 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_GNT_L_0_REG + j * 0x90);
-		p[365 + i] = dsaf_read_dev(ddev,
+		p[369 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_GNT_H_0_REG + j * 0x90);
-		p[368 + i] = dsaf_read_dev(ddev,
+		p[372 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_CONNECT_STATE_0_REG + j * 0x90);
-		p[371 + i] = dsaf_read_dev(ddev,
+		p[375 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_RCVPKT_CNT_0_REG + j * 0x90);
-		p[374 + i] = dsaf_read_dev(ddev,
+		p[378 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_RCVTC0_CNT_0_REG + j * 0x90);
-		p[377 + i] = dsaf_read_dev(ddev,
+		p[381 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_RCVTC1_CNT_0_REG + j * 0x90);
-		p[380 + i] = dsaf_read_dev(ddev,
+		p[384 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_RCVTC2_CNT_0_REG + j * 0x90);
-		p[383 + i] = dsaf_read_dev(ddev,
+		p[387 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_RCVTC3_CNT_0_REG + j * 0x90);
-		p[386 + i] = dsaf_read_dev(ddev,
+		p[390 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_RCVVC0_CNT_0_REG + j * 0x90);
-		p[389 + i] = dsaf_read_dev(ddev,
+		p[393 + i] = dsaf_read_dev(ddev,
 				DSAF_XOD_RCVVC1_CNT_0_REG + j * 0x90);
 	}
 
-	p[392] = dsaf_read_dev(ddev,
+	p[396] = dsaf_read_dev(ddev,
 		DSAF_XOD_XGE_RCVIN0_CNT_0_REG + port * 0x90);
-	p[393] = dsaf_read_dev(ddev,
+	p[397] = dsaf_read_dev(ddev,
 		DSAF_XOD_XGE_RCVIN1_CNT_0_REG + port * 0x90);
-	p[394] = dsaf_read_dev(ddev,
+	p[398] = dsaf_read_dev(ddev,
 		DSAF_XOD_XGE_RCVIN2_CNT_0_REG + port * 0x90);
-	p[395] = dsaf_read_dev(ddev,
+	p[399] = dsaf_read_dev(ddev,
 		DSAF_XOD_XGE_RCVIN3_CNT_0_REG + port * 0x90);
-	p[396] = dsaf_read_dev(ddev,
+	p[400] = dsaf_read_dev(ddev,
 		DSAF_XOD_XGE_RCVIN4_CNT_0_REG + port * 0x90);
-	p[397] = dsaf_read_dev(ddev,
+	p[401] = dsaf_read_dev(ddev,
 		DSAF_XOD_XGE_RCVIN5_CNT_0_REG + port * 0x90);
-	p[398] = dsaf_read_dev(ddev,
+	p[402] = dsaf_read_dev(ddev,
 		DSAF_XOD_XGE_RCVIN6_CNT_0_REG + port * 0x90);
-	p[399] = dsaf_read_dev(ddev,
+	p[403] = dsaf_read_dev(ddev,
 		DSAF_XOD_XGE_RCVIN7_CNT_0_REG + port * 0x90);
-	p[400] = dsaf_read_dev(ddev,
+	p[404] = dsaf_read_dev(ddev,
 		DSAF_XOD_PPE_RCVIN0_CNT_0_REG + port * 0x90);
-	p[401] = dsaf_read_dev(ddev,
+	p[405] = dsaf_read_dev(ddev,
 		DSAF_XOD_PPE_RCVIN1_CNT_0_REG + port * 0x90);
-	p[402] = dsaf_read_dev(ddev,
+	p[406] = dsaf_read_dev(ddev,
 		DSAF_XOD_ROCEE_RCVIN0_CNT_0_REG + port * 0x90);
-	p[403] = dsaf_read_dev(ddev,
+	p[407] = dsaf_read_dev(ddev,
 		DSAF_XOD_ROCEE_RCVIN1_CNT_0_REG + port * 0x90);
-	p[404] = dsaf_read_dev(ddev,
+	p[408] = dsaf_read_dev(ddev,
 		DSAF_XOD_FIFO_STATUS_0_REG + port * 0x90);
 
 	/* dsaf voq registers */
 	for (i = 0; i < DSAF_VOQ_NUM / DSAF_COMM_CHN; i++) {
 		j = (i * DSAF_COMM_CHN + port) * 0x90;
-		p[405 + i] = dsaf_read_dev(ddev,
+		p[409 + i] = dsaf_read_dev(ddev,
 			DSAF_VOQ_ECC_INVERT_EN_0_REG + j);
-		p[408 + i] = dsaf_read_dev(ddev,
+		p[412 + i] = dsaf_read_dev(ddev,
 			DSAF_VOQ_SRAM_PKT_NUM_0_REG + j);
-		p[411 + i] = dsaf_read_dev(ddev, DSAF_VOQ_IN_PKT_NUM_0_REG + j);
-		p[414 + i] = dsaf_read_dev(ddev,
+		p[415 + i] = dsaf_read_dev(ddev, DSAF_VOQ_IN_PKT_NUM_0_REG + j);
+		p[418 + i] = dsaf_read_dev(ddev,
 			DSAF_VOQ_OUT_PKT_NUM_0_REG + j);
-		p[417 + i] = dsaf_read_dev(ddev,
+		p[421 + i] = dsaf_read_dev(ddev,
 			DSAF_VOQ_ECC_ERR_ADDR_0_REG + j);
-		p[420 + i] = dsaf_read_dev(ddev, DSAF_VOQ_BP_STATUS_0_REG + j);
-		p[423 + i] = dsaf_read_dev(ddev, DSAF_VOQ_SPUP_IDLE_0_REG + j);
-		p[426 + i] = dsaf_read_dev(ddev,
+		p[424 + i] = dsaf_read_dev(ddev, DSAF_VOQ_BP_STATUS_0_REG + j);
+		p[427 + i] = dsaf_read_dev(ddev, DSAF_VOQ_SPUP_IDLE_0_REG + j);
+		p[430 + i] = dsaf_read_dev(ddev,
 			DSAF_VOQ_XGE_XOD_REQ_0_0_REG + j);
-		p[429 + i] = dsaf_read_dev(ddev,
+		p[433 + i] = dsaf_read_dev(ddev,
 			DSAF_VOQ_XGE_XOD_REQ_1_0_REG + j);
-		p[432 + i] = dsaf_read_dev(ddev,
+		p[436 + i] = dsaf_read_dev(ddev,
 			DSAF_VOQ_PPE_XOD_REQ_0_REG + j);
-		p[435 + i] = dsaf_read_dev(ddev,
+		p[439 + i] = dsaf_read_dev(ddev,
 			DSAF_VOQ_ROCEE_XOD_REQ_0_REG + j);
-		p[438 + i] = dsaf_read_dev(ddev,
+		p[442 + i] = dsaf_read_dev(ddev,
 			DSAF_VOQ_BP_ALL_THRD_0_REG + j);
 	}
 
 	/* dsaf tbl registers */
-	p[441] = dsaf_read_dev(ddev, DSAF_TBL_CTRL_0_REG);
-	p[442] = dsaf_read_dev(ddev, DSAF_TBL_INT_MSK_0_REG);
-	p[443] = dsaf_read_dev(ddev, DSAF_TBL_INT_SRC_0_REG);
-	p[444] = dsaf_read_dev(ddev, DSAF_TBL_INT_STS_0_REG);
-	p[445] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_ADDR_0_REG);
-	p[446] = dsaf_read_dev(ddev, DSAF_TBL_LINE_ADDR_0_REG);
-	p[447] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_HIGH_0_REG);
-	p[448] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_LOW_0_REG);
-	p[449] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_MCAST_CFG_4_0_REG);
-	p[450] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_MCAST_CFG_3_0_REG);
-	p[451] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_MCAST_CFG_2_0_REG);
-	p[452] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_MCAST_CFG_1_0_REG);
-	p[453] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_MCAST_CFG_0_0_REG);
-	p[454] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_UCAST_CFG_0_REG);
-	p[455] = dsaf_read_dev(ddev, DSAF_TBL_LIN_CFG_0_REG);
-	p[456] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RDATA_HIGH_0_REG);
-	p[457] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RDATA_LOW_0_REG);
-	p[458] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RAM_RDATA4_0_REG);
-	p[459] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RAM_RDATA3_0_REG);
-	p[460] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RAM_RDATA2_0_REG);
-	p[461] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RAM_RDATA1_0_REG);
-	p[462] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RAM_RDATA0_0_REG);
-	p[463] = dsaf_read_dev(ddev, DSAF_TBL_LIN_RDATA_0_REG);
+	p[445] = dsaf_read_dev(ddev, DSAF_TBL_CTRL_0_REG);
+	p[446] = dsaf_read_dev(ddev, DSAF_TBL_INT_MSK_0_REG);
+	p[447] = dsaf_read_dev(ddev, DSAF_TBL_INT_SRC_0_REG);
+	p[448] = dsaf_read_dev(ddev, DSAF_TBL_INT_STS_0_REG);
+	p[449] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_ADDR_0_REG);
+	p[450] = dsaf_read_dev(ddev, DSAF_TBL_LINE_ADDR_0_REG);
+	p[451] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_HIGH_0_REG);
+	p[452] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_LOW_0_REG);
+	p[453] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_MCAST_CFG_4_0_REG);
+	p[454] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_MCAST_CFG_3_0_REG);
+	p[455] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_MCAST_CFG_2_0_REG);
+	p[456] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_MCAST_CFG_1_0_REG);
+	p[457] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_MCAST_CFG_0_0_REG);
+	p[458] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_UCAST_CFG_0_REG);
+	p[459] = dsaf_read_dev(ddev, DSAF_TBL_LIN_CFG_0_REG);
+	p[460] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RDATA_HIGH_0_REG);
+	p[461] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RDATA_LOW_0_REG);
+	p[462] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RAM_RDATA4_0_REG);
+	p[463] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RAM_RDATA3_0_REG);
+	p[464] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RAM_RDATA2_0_REG);
+	p[465] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RAM_RDATA1_0_REG);
+	p[466] = dsaf_read_dev(ddev, DSAF_TBL_TCAM_RAM_RDATA0_0_REG);
+	p[467] = dsaf_read_dev(ddev, DSAF_TBL_LIN_RDATA_0_REG);
 
 	for (i = 0; i < DSAF_SW_PORT_NUM; i++) {
 		j = i * 0x8;
-		p[464 + 2 * i] = dsaf_read_dev(ddev,
+		p[468 + 2 * i] = dsaf_read_dev(ddev,
 			DSAF_TBL_DA0_MIS_INFO1_0_REG + j);
-		p[465 + 2 * i] = dsaf_read_dev(ddev,
+		p[469 + 2 * i] = dsaf_read_dev(ddev,
 			DSAF_TBL_DA0_MIS_INFO0_0_REG + j);
 	}
 
-	p[480] = dsaf_read_dev(ddev, DSAF_TBL_SA_MIS_INFO2_0_REG);
-	p[481] = dsaf_read_dev(ddev, DSAF_TBL_SA_MIS_INFO1_0_REG);
-	p[482] = dsaf_read_dev(ddev, DSAF_TBL_SA_MIS_INFO0_0_REG);
-	p[483] = dsaf_read_dev(ddev, DSAF_TBL_PUL_0_REG);
-	p[484] = dsaf_read_dev(ddev, DSAF_TBL_OLD_RSLT_0_REG);
-	p[485] = dsaf_read_dev(ddev, DSAF_TBL_OLD_SCAN_VAL_0_REG);
-	p[486] = dsaf_read_dev(ddev, DSAF_TBL_DFX_CTRL_0_REG);
-	p[487] = dsaf_read_dev(ddev, DSAF_TBL_DFX_STAT_0_REG);
-	p[488] = dsaf_read_dev(ddev, DSAF_TBL_DFX_STAT_2_0_REG);
-	p[489] = dsaf_read_dev(ddev, DSAF_TBL_LKUP_NUM_I_0_REG);
-	p[490] = dsaf_read_dev(ddev, DSAF_TBL_LKUP_NUM_O_0_REG);
-	p[491] = dsaf_read_dev(ddev, DSAF_TBL_UCAST_BCAST_MIS_INFO_0_0_REG);
+	p[484] = dsaf_read_dev(ddev, DSAF_TBL_SA_MIS_INFO2_0_REG);
+	p[485] = dsaf_read_dev(ddev, DSAF_TBL_SA_MIS_INFO1_0_REG);
+	p[486] = dsaf_read_dev(ddev, DSAF_TBL_SA_MIS_INFO0_0_REG);
+	p[487] = dsaf_read_dev(ddev, DSAF_TBL_PUL_0_REG);
+	p[488] = dsaf_read_dev(ddev, DSAF_TBL_OLD_RSLT_0_REG);
+	p[489] = dsaf_read_dev(ddev, DSAF_TBL_OLD_SCAN_VAL_0_REG);
+	p[490] = dsaf_read_dev(ddev, DSAF_TBL_DFX_CTRL_0_REG);
+	p[491] = dsaf_read_dev(ddev, DSAF_TBL_DFX_STAT_0_REG);
+	p[492] = dsaf_read_dev(ddev, DSAF_TBL_DFX_STAT_2_0_REG);
+	p[493] = dsaf_read_dev(ddev, DSAF_TBL_LKUP_NUM_I_0_REG);
+	p[494] = dsaf_read_dev(ddev, DSAF_TBL_LKUP_NUM_O_0_REG);
+	p[495] = dsaf_read_dev(ddev, DSAF_TBL_UCAST_BCAST_MIS_INFO_0_0_REG);
 
 	/* dsaf other registers */
-	p[492] = dsaf_read_dev(ddev, DSAF_INODE_FIFO_WL_0_REG + port * 0x4);
-	p[493] = dsaf_read_dev(ddev, DSAF_ONODE_FIFO_WL_0_REG + port * 0x4);
-	p[494] = dsaf_read_dev(ddev, DSAF_XGE_GE_WORK_MODE_0_REG + port * 0x4);
-	p[495] = dsaf_read_dev(ddev,
+	p[496] = dsaf_read_dev(ddev, DSAF_INODE_FIFO_WL_0_REG + port * 0x4);
+	p[497] = dsaf_read_dev(ddev, DSAF_ONODE_FIFO_WL_0_REG + port * 0x4);
+	p[498] = dsaf_read_dev(ddev, DSAF_XGE_GE_WORK_MODE_0_REG + port * 0x4);
+	p[499] = dsaf_read_dev(ddev,
 		DSAF_XGE_APP_RX_LINK_UP_0_REG + port * 0x4);
-	p[496] = dsaf_read_dev(ddev, DSAF_NETPORT_CTRL_SIG_0_REG + port * 0x4);
-	p[497] = dsaf_read_dev(ddev, DSAF_XGE_CTRL_SIG_CFG_0_REG + port * 0x4);
+	p[500] = dsaf_read_dev(ddev, DSAF_NETPORT_CTRL_SIG_0_REG + port * 0x4);
+	p[501] = dsaf_read_dev(ddev, DSAF_XGE_CTRL_SIG_CFG_0_REG + port * 0x4);
 
 	if (!is_ver1)
-		p[498] = dsaf_read_dev(ddev, DSAF_PAUSE_CFG_REG + port * 0x4);
+		p[502] = dsaf_read_dev(ddev, DSAF_PAUSE_CFG_REG + port * 0x4);
 
 	/* mark end of dsaf regs */
-	for (i = 499; i < 504; i++)
+	for (i = 503; i < 504; i++)
 		p[i] = 0xdddddddd;
 }
 
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
index 2cf8b1d82d6a..bf0c5a60f5f1 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
@@ -173,7 +173,7 @@
 #define DSAF_INODE_IN_DATA_STP_DISC_0_REG	0x1A50
 #define DSAF_INODE_GE_FC_EN_0_REG		0x1B00
 #define DSAF_INODE_VC0_IN_PKT_NUM_0_REG		0x1B50
-#define DSAF_INODE_VC1_IN_PKT_NUM_0_REG		0x1C00
+#define DSAF_INODE_VC1_IN_PKT_NUM_0_REG		0x103C
 #define DSAF_INODE_IN_PRIO_PAUSE_BASE_REG	0x1C00
 #define DSAF_INODE_IN_PRIO_PAUSE_BASE_OFFSET	0x100
 #define DSAF_INODE_IN_PRIO_PAUSE_OFFSET		0x50
@@ -400,11 +400,11 @@
 #define RCB_ECC_ERR_ADDR4_REG			0x460
 #define RCB_ECC_ERR_ADDR5_REG			0x464
 
-#define RCB_COM_SF_CFG_INTMASK_RING		0x480
-#define RCB_COM_SF_CFG_RING_STS			0x484
-#define RCB_COM_SF_CFG_RING			0x488
-#define RCB_COM_SF_CFG_INTMASK_BD		0x48C
-#define RCB_COM_SF_CFG_BD_RINT_STS		0x470
+#define RCB_COM_SF_CFG_INTMASK_RING		0x470
+#define RCB_COM_SF_CFG_RING_STS			0x474
+#define RCB_COM_SF_CFG_RING			0x478
+#define RCB_COM_SF_CFG_INTMASK_BD		0x47C
+#define RCB_COM_SF_CFG_BD_RINT_STS		0x480
 #define RCB_COM_RCB_RD_BD_BUSY			0x490
 #define RCB_COM_RCB_FBD_CRT_EN			0x494
 #define RCB_COM_AXI_WR_ERR_INTMASK		0x498
-- 
2.19.1

[PATCH AUTOSEL 4.9 23/35] net: hns: Fixed bug that netdev was opened twice

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 5778b13b64eca5549d242686f2f91a2c80c8fa40 ]

After resetting dsaf to try to repair chip error such as ecc error,
the net device will be open if net interface is up. But at this time
if there is the users set the net device up with the command ifconfig,
the net device will be opened twice consecutively.

Function napi_enable was called when open device. And Kernel panic will
be occurred if it was called twice consecutively. Such as follow:
static inline void napi_enable(struct napi_struct *n)
{
         BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
         smp_mb__before_clear_bit();
         clear_bit(NAPI_STATE_SCHED, &n->state);
}

[37255.571996] Kernel panic - not syncing: BUG!
[37255.595234] Call trace:
[37255.597694] [<ffff80000008ab48>] dump_backtrace+0x0/0x1a0
[37255.603114] [<ffff80000008ad08>] show_stack+0x20/0x28
[37255.608187] [<ffff8000009c4944>] dump_stack+0x98/0xb8
[37255.613258] [<ffff8000009c149c>] panic+0x10c/0x26c
[37255.618070] [<ffff80000070f134>] hns_nic_net_up+0x30c/0x4e0
[37255.623664] [<ffff80000070f39c>] hns_nic_net_open+0x94/0x12c
[37255.629346] [<ffff80000084be78>] __dev_open+0xf4/0x168
[37255.634504] [<ffff80000084c1ac>] __dev_change_flags+0x98/0x15c
[37255.640359] [<ffff80000084c29c>] dev_change_flags+0x2c/0x68
[37255.769580] [<ffff8000008dc400>] devinet_ioctl+0x650/0x704
[37255.775086] [<ffff8000008ddc38>] inet_ioctl+0x98/0xb4
[37255.780159] [<ffff800000827b7c>] sock_do_ioctl+0x44/0x84
[37255.785490] [<ffff800000828e04>] sock_ioctl+0x248/0x30c
[37255.790737] [<ffff80000026dc6c>] do_vfs_ioctl+0x480/0x618
[37255.796156] [<ffff80000026de94>] SyS_ioctl+0x90/0xa4
[37255.801139] SMP: stopping secondary CPUs
[37255.805079] kbox: catch panic event.
[37255.809586] collected_len = 128928, LOG_BUF_LEN_LOCAL = 131072
[37255.816103] flush cache 0xffff80003f000000  size 0x800000
[37255.822192] flush cache 0xffff80003f000000  size 0x800000
[37255.828289] flush cache 0xffff80003f000000  size 0x800000
[37255.834378] kbox: no notify die func register. no need to notify
[37255.840413] ---[ end Kernel panic - not syncing: BUG!

This patchset fix this bug according to the flag NIC_STATE_DOWN.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 12d90c04931b..d96a64bc1db8 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -1238,6 +1238,9 @@ static int hns_nic_net_up(struct net_device *ndev)
 	int i, j;
 	int ret;
 
+	if (!test_bit(NIC_STATE_DOWN, &priv->state))
+		return 0;
+
 	ret = hns_nic_init_irq(priv);
 	if (ret != 0) {
 		netdev_err(ndev, "hns init irq failed! ret=%d\n", ret);
-- 
2.19.1

[PATCH AUTOSEL 4.9 24/35] net: hns: Clean rx fbd when ae stopped.

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 31f6b61d810654fb3ef43f4d8afda0f44b142fad ]

If there are packets in hardware when changing the speed or duplex,
it may cause hardware hang up.

This patch adds the code to wait rx fbd clean up when ae stopped.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
index b7c8433a7a37..0b4d90ceea7a 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c
@@ -290,6 +290,9 @@ void hns_ae_stop(struct hnae_handle *handle)
 
 	hns_ae_ring_enable_all(handle, 0);
 
+	/* clean rx fbd. */
+	hns_rcb_wait_fbd_clean(handle->qs, handle->q_num, RCB_INT_FLAG_RX);
+
 	(void)hns_mac_vm_config_bc_en(mac_cb, 0, false);
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.9 25/35] net: hns: Free irq when exit from abnormal branch

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit c82bd077e1ba3dd586569c733dc6d3dd4b0e43cd ]

1.In "hns_nic_init_irq", if request irq fail at index i,
  the function return directly without releasing irq resources
  that already requested.

2.In "hns_nic_net_up" after "hns_nic_init_irq",
  if exceptional branch occurs, irqs that already requested
  are not release.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 23 ++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index d96a64bc1db8..63a14edd6a19 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -1195,6 +1195,22 @@ static void hns_set_irq_affinity(struct hns_nic_priv *priv)
 	}
 }
 
+static void hns_nic_free_irq(int q_num, struct hns_nic_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < q_num * 2; i++) {
+		if (priv->ring_data[i].ring->irq_init_flag == RCB_IRQ_INITED) {
+			irq_set_affinity_hint(priv->ring_data[i].ring->irq,
+					      NULL);
+			free_irq(priv->ring_data[i].ring->irq,
+				 &priv->ring_data[i]);
+			priv->ring_data[i].ring->irq_init_flag =
+				RCB_IRQ_NOT_INITED;
+		}
+	}
+}
+
 static int hns_nic_init_irq(struct hns_nic_priv *priv)
 {
 	struct hnae_handle *h = priv->ae_handle;
@@ -1219,7 +1235,7 @@ static int hns_nic_init_irq(struct hns_nic_priv *priv)
 		if (ret) {
 			netdev_err(priv->netdev, "request irq(%d) fail\n",
 				   rd->ring->irq);
-			return ret;
+			goto out_free_irq;
 		}
 		disable_irq(rd->ring->irq);
 		rd->ring->irq_init_flag = RCB_IRQ_INITED;
@@ -1229,6 +1245,10 @@ static int hns_nic_init_irq(struct hns_nic_priv *priv)
 	hns_set_irq_affinity(priv);
 
 	return 0;
+
+out_free_irq:
+	hns_nic_free_irq(h->q_num, priv);
+	return ret;
 }
 
 static int hns_nic_net_up(struct net_device *ndev)
@@ -1276,6 +1296,7 @@ static int hns_nic_net_up(struct net_device *ndev)
 	for (j = i - 1; j >= 0; j--)
 		hns_nic_ring_close(ndev, j);
 
+	hns_nic_free_irq(h->q_num, priv);
 	set_bit(NIC_STATE_DOWN, &priv->state);
 
 	return ret;
-- 
2.19.1

[PATCH AUTOSEL 4.9 26/35] net: hns: Avoid net reset caused by pause frames storm

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit a57275d35576fdd89d8c771eedf1e7cf97e0dfa6 ]

There will be a large number of MAC pause frames on the net,
which caused tx timeout of net device. And then the net device
was reset to try to recover it. So that is not useful, and will
cause some other problems.

So need doubled ndev->watchdog_timeo if device watchdog occurred
until watchdog_timeo up to 40s and then try resetting to recover
it.

When collecting dfx information such as hardware registers when tx timeout.
Some registers for count were cleared when read. So need move this task
before update net state which also read the count registers.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 63a14edd6a19..7ffbd70824d9 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -1407,11 +1407,19 @@ static int hns_nic_net_stop(struct net_device *ndev)
 }
 
 static void hns_tx_timeout_reset(struct hns_nic_priv *priv);
+#define HNS_TX_TIMEO_LIMIT (40 * HZ)
 static void hns_nic_net_timeout(struct net_device *ndev)
 {
 	struct hns_nic_priv *priv = netdev_priv(ndev);
 
-	hns_tx_timeout_reset(priv);
+	if (ndev->watchdog_timeo < HNS_TX_TIMEO_LIMIT) {
+		ndev->watchdog_timeo *= 2;
+		netdev_info(ndev, "watchdog_timo changed to %d.\n",
+			    ndev->watchdog_timeo);
+	} else {
+		ndev->watchdog_timeo = HNS_NIC_TX_TIMEOUT;
+		hns_tx_timeout_reset(priv);
+	}
 }
 
 static int hns_nic_do_ioctl(struct net_device *netdev, struct ifreq *ifr,
@@ -1745,11 +1753,11 @@ static void hns_nic_service_task(struct work_struct *work)
 		= container_of(work, struct hns_nic_priv, service_task);
 	struct hnae_handle *h = priv->ae_handle;
 
+	hns_nic_reset_subtask(priv);
 	hns_nic_update_link_status(priv->netdev);
 	h->dev->ops->update_led_status(h);
 	hns_nic_update_stats(priv->netdev);
 
-	hns_nic_reset_subtask(priv);
 	hns_nic_service_event_complete(priv);
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.9 27/35] net: hns: Fix ntuple-filters status error.

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 7e74a19ca522aec7c2be201a7ae1d1d57ded409b ]

The ntuple-filters features is forced on by chip.
But it shows "ntuple-filters: off [fixed]" when use ethtool.
This patch make it correct with "ntuple-filters: on [fixed]".

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 7ffbd70824d9..a2f7d0834071 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -2036,7 +2036,7 @@ static int hns_nic_dev_probe(struct platform_device *pdev)
 
 	switch (priv->enet_ver) {
 	case AE_VERSION_2:
-		ndev->features |= NETIF_F_TSO | NETIF_F_TSO6;
+		ndev->features |= NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_NTUPLE;
 		ndev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
 			NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_GSO |
 			NETIF_F_GRO | NETIF_F_TSO | NETIF_F_TSO6;
-- 
2.19.1

[PATCH AUTOSEL 4.9 28/35] net: hns: Add mac pcs config when enable|disable mac

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 726ae5c9e5f0c18eca8ea5296b526242c3e89822 ]

In some case, when mac enable|disable and adjust link, may cause hard to
link(or abnormal) between mac and phy. This patch adds the code for rx PCS
to avoid this bug.

Disable the rx PCS when driver disable the gmac, and enable the rx PCS
when driver enable the mac.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c | 14 ++++++++++----
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h  |  1 +
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
index 02a03bccde7b..95967470d423 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
@@ -67,11 +67,14 @@ static void hns_gmac_enable(void *mac_drv, enum mac_commom_mode mode)
 	struct mac_driver *drv = (struct mac_driver *)mac_drv;
 
 	/*enable GE rX/tX */
-	if ((mode == MAC_COMM_MODE_TX) || (mode == MAC_COMM_MODE_RX_AND_TX))
+	if (mode == MAC_COMM_MODE_TX || mode == MAC_COMM_MODE_RX_AND_TX)
 		dsaf_set_dev_bit(drv, GMAC_PORT_EN_REG, GMAC_PORT_TX_EN_B, 1);
 
-	if ((mode == MAC_COMM_MODE_RX) || (mode == MAC_COMM_MODE_RX_AND_TX))
+	if (mode == MAC_COMM_MODE_RX || mode == MAC_COMM_MODE_RX_AND_TX) {
+		/* enable rx pcs */
+		dsaf_set_dev_bit(drv, GMAC_PCS_RX_EN_REG, 0, 0);
 		dsaf_set_dev_bit(drv, GMAC_PORT_EN_REG, GMAC_PORT_RX_EN_B, 1);
+	}
 }
 
 static void hns_gmac_disable(void *mac_drv, enum mac_commom_mode mode)
@@ -79,11 +82,14 @@ static void hns_gmac_disable(void *mac_drv, enum mac_commom_mode mode)
 	struct mac_driver *drv = (struct mac_driver *)mac_drv;
 
 	/*disable GE rX/tX */
-	if ((mode == MAC_COMM_MODE_TX) || (mode == MAC_COMM_MODE_RX_AND_TX))
+	if (mode == MAC_COMM_MODE_TX || mode == MAC_COMM_MODE_RX_AND_TX)
 		dsaf_set_dev_bit(drv, GMAC_PORT_EN_REG, GMAC_PORT_TX_EN_B, 0);
 
-	if ((mode == MAC_COMM_MODE_RX) || (mode == MAC_COMM_MODE_RX_AND_TX))
+	if (mode == MAC_COMM_MODE_RX || mode == MAC_COMM_MODE_RX_AND_TX) {
+		/* disable rx pcs */
+		dsaf_set_dev_bit(drv, GMAC_PCS_RX_EN_REG, 0, 1);
 		dsaf_set_dev_bit(drv, GMAC_PORT_EN_REG, GMAC_PORT_RX_EN_B, 0);
+	}
 }
 
 /* hns_gmac_get_en - get port enable
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
index bf0c5a60f5f1..6f3ec2f1535d 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
@@ -528,6 +528,7 @@
 #define GMAC_LD_LINK_COUNTER_REG		0x01D0UL
 #define GMAC_LOOP_REG				0x01DCUL
 #define GMAC_RECV_CONTROL_REG			0x01E0UL
+#define GMAC_PCS_RX_EN_REG			0x01E4UL
 #define GMAC_VLAN_CODE_REG			0x01E8UL
 #define GMAC_RX_OVERRUN_CNT_REG			0x01ECUL
 #define GMAC_RX_LENGTHFIELD_ERR_CNT_REG		0x01F4UL
-- 
2.19.1

[PATCH AUTOSEL 4.9 29/35] SUNRPC: Fix a race with XPRT_CONNECTING

[Sasha Levin]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit cf76785d30712d90185455e752337acdb53d2a5d ]

Ensure that we clear XPRT_CONNECTING before releasing the XPRT_LOCK so that
we don't have races between the (asynchronous) socket setup code and
tasks in xprt_connect().

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtsock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 1bf9153004cd..280fb3178708 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -2209,8 +2209,8 @@ static void xs_udp_setup_socket(struct work_struct *work)
 	trace_rpc_socket_connect(xprt, sock, 0);
 	status = 0;
 out:
-	xprt_unlock_connect(xprt, transport);
 	xprt_clear_connecting(xprt);
+	xprt_unlock_connect(xprt, transport);
 	xprt_wake_pending_tasks(xprt, status);
 }
 
@@ -2395,8 +2395,8 @@ static void xs_tcp_setup_socket(struct work_struct *work)
 	}
 	status = -EAGAIN;
 out:
-	xprt_unlock_connect(xprt, transport);
 	xprt_clear_connecting(xprt);
+	xprt_unlock_connect(xprt, transport);
 	xprt_wake_pending_tasks(xprt, status);
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.9 31/35] lan78xx: Resolve issue with changing MAC address

[Sasha Levin]

From: Jason Martinsen <jasonmartinsen@msn.com>

[ Upstream commit 15515aaaa69659c502003926a2067ee76176148a ]

Current state for the lan78xx driver does not allow for changing the
MAC address of the interface, without either removing the module (if
you compiled it that way) or rebooting the machine.  If you attempt to
change the MAC address, ifconfig will show the new address, however,
the system/interface will not respond to any traffic using that
configuration.  A few short-term options to work around this are to
unload the module and reload it with the new MAC address, change the
interface to "promisc", or reboot with the correct configuration to
change the MAC.

This patch enables the ability to change the MAC address via fairly normal means...
ifdown <interface>
modify entry in /etc/network/interfaces OR a similar method
ifup <interface>
Then test via any network communication, such as ICMP requests to gateway.

My only test platform for this patch has been a raspberry pi model 3b+.

Signed-off-by: Jason Martinsen <jasonmartinsen@msn.com>

-----

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/lan78xx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 6b4e38105b72..e143a7fe9320 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2014,6 +2014,10 @@ static int lan78xx_set_mac_addr(struct net_device *netdev, void *p)
 	ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
 	ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
 
+	/* Added to support MAC address changes */
+	ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
+	ret = lan78xx_write_reg(dev, MAF_HI(0), addr_hi | MAF_HI_VALID_);
+
 	return 0;
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.9 32/35] xen/netfront: tolerate frags with no data

[Sasha Levin]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit d81c5054a5d1d4999c7cdead7636b6cd4af83d36 ]

At least old Xen net backends seem to send frags with no real data
sometimes. In case such a fragment happens to occur with the frag limit
already reached the frontend will BUG currently even if this situation
is easily recoverable.

Modify the BUG_ON() condition accordingly.

Tested-by: Dietmar Hahn <dietmar.hahn@ts.fujitsu.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netfront.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index aceae791baf3..14ceeaaa7fe5 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -903,7 +903,7 @@ static RING_IDX xennet_fill_frags(struct netfront_queue *queue,
 		if (skb_shinfo(skb)->nr_frags == MAX_SKB_FRAGS) {
 			unsigned int pull_to = NETFRONT_SKB_CB(skb)->pull_to;
 
-			BUG_ON(pull_to <= skb_headlen(skb));
+			BUG_ON(pull_to < skb_headlen(skb));
 			__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
 		}
 		if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) {
-- 
2.19.1

[PATCH AUTOSEL 4.9 33/35] vxge: ensure data0 is initialized in when fetching firmware version information

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit f7db2beb4c2c6cc8111f5ab90fc7363ca91107b6 ]

Currently variable data0 is not being initialized so a garbage value is
being passed to vxge_hw_vpath_fw_api and this value is being written to
the rts_access_steer_data0 register.  There are other occurrances where
data0 is being initialized to zero (e.g. in function
vxge_hw_upgrade_read_version) so I think it makes sense to ensure data0
is initialized likewise to 0.

Detected by CoverityScan, CID#140696 ("Uninitialized scalar variable")

Fixes: 8424e00dfd52 ("vxge: serialize access to steering control register")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/neterion/vxge/vxge-config.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/neterion/vxge/vxge-config.c b/drivers/net/ethernet/neterion/vxge/vxge-config.c
index 6223930a8155..6f57b0b7d57a 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-config.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-config.c
@@ -808,7 +808,7 @@ __vxge_hw_vpath_fw_ver_get(struct __vxge_hw_virtualpath *vpath,
 	struct vxge_hw_device_date *fw_date = &hw_info->fw_date;
 	struct vxge_hw_device_version *flash_version = &hw_info->flash_version;
 	struct vxge_hw_device_date *flash_date = &hw_info->flash_date;
-	u64 data0, data1 = 0, steer_ctrl = 0;
+	u64 data0 = 0, data1 = 0, steer_ctrl = 0;
 	enum vxge_hw_status status;
 
 	status = vxge_hw_vpath_fw_api(vpath,
-- 
2.19.1

[PATCH AUTOSEL 4.9 34/35] net: netxen: fix a missing check and an uninitialized use

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit d134e486e831defd26130770181f01dfc6195f7d ]

When netxen_rom_fast_read() fails, "bios" is left uninitialized and may
contain random value, thus should not be used.

The fix ensures that if netxen_rom_fast_read() fails, we return "-EIO".

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
index 7b43a3b4abdc..5cf551914767 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
@@ -1125,7 +1125,8 @@ netxen_validate_firmware(struct netxen_adapter *adapter)
 		return -EINVAL;
 	}
 	val = nx_get_bios_version(adapter);
-	netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios);
+	if (netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios))
+		return -EIO;
 	if ((__force u32)val != bios) {
 		dev_err(&pdev->dev, "%s: firmware bios is incompatible\n",
 				fw_name[fw_type]);
-- 
2.19.1