[PATCH net-next 0/3] net: dsa: mv88e6xxx: fix IPv6

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

We'have had some emails in private over this issue, this is my current
patch set rebased on top of net-next which provides working IPv6 (and
probably other protocols as well) over mv88e6xxx DSA switches.

The problem comes down to mv88e6xxx defaulting to not flood unknown
unicast and multicast datagrams, as they would be by dumb switches,
and as the Linux bridge code does by default.

These flood settings can be disabled via the Linux bridge code if it's
desired to make the switch behave more like a managed switch, eg, by
enabling the multicast querier.  However, the multicast querier
defaults to being disabled which effectively means that by default,
mv88e6xxx switches block all multicast traffic.  This is at odds with
the Linux bridge documentation, and the defaults that the Linux bridge
code adopts.

So, this patch set adds DSA support for Linux bridge flags, adds
mv88e6xxx support for the unicast and multicast flooding flags, and
lastly enables flooding of these frames by default to match the
Linux bridge defaults.

 drivers/net/dsa/mv88e6xxx/chip.c | 42 ++++++++++++++++++++++++++++++++++++----
 include/net/dsa.h                |  3 +++
 net/dsa/dsa_priv.h               |  2 ++
 net/dsa/port.c                   | 15 ++++++++++++++
 net/dsa/slave.c                  |  6 ++++++
 5 files changed, 64 insertions(+), 4 deletions(-)

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up