* [PATCH] rtl8150: switch to BIT macro
@ 2019-05-09 9:01 Oliver Neukum
2019-05-09 14:34 ` Petko Manolov
0 siblings, 1 reply; 3+ messages in thread
From: Oliver Neukum @ 2019-05-09 9:01 UTC (permalink / raw)
To: petkan, netdev; +Cc: Oliver Neukum
A bit of housekeeping switching the driver to the BIT()
macro.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
---
drivers/net/usb/rtl8150.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index 59dbdbb5feff..1ed85fba1a7c 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -41,7 +41,7 @@
#define ANLP 0x0146
#define AER 0x0148
#define CSCR 0x014C /* This one has the link status */
-#define CSCR_LINK_STATUS (1 << 3)
+#define CSCR_LINK_STATUS BIT(3)
#define IDR_EEPROM 0x1202
@@ -59,20 +59,20 @@
/* Transmit status register errors */
-#define TSR_ECOL (1<<5)
-#define TSR_LCOL (1<<4)
-#define TSR_LOSS_CRS (1<<3)
-#define TSR_JBR (1<<2)
+#define TSR_ECOL BIT(5)
+#define TSR_LCOL BIT(4)
+#define TSR_LOSS_CRS BIT(3)
+#define TSR_JBR BIT(2)
#define TSR_ERRORS (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
/* Receive status register errors */
-#define RSR_CRC (1<<2)
-#define RSR_FAE (1<<1)
+#define RSR_CRC BIT(2)
+#define RSR_FAE BIT(1)
#define RSR_ERRORS (RSR_CRC | RSR_FAE)
/* Media status register definitions */
-#define MSR_DUPLEX (1<<4)
-#define MSR_SPEED (1<<3)
-#define MSR_LINK (1<<2)
+#define MSR_DUPLEX BIT(4)
+#define MSR_SPEED BIT(3)
+#define MSR_LINK BIT(2)
/* Interrupt pipe data */
#define INT_TSR 0x00
--
2.16.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] rtl8150: switch to BIT macro
2019-05-09 9:01 [PATCH] rtl8150: switch to BIT macro Oliver Neukum
@ 2019-05-09 14:34 ` Petko Manolov
2019-05-09 16:49 ` David Miller
0 siblings, 1 reply; 3+ messages in thread
From: Petko Manolov @ 2019-05-09 14:34 UTC (permalink / raw)
To: Oliver Neukum; +Cc: netdev
On 19-05-09 11:01:06, Oliver Neukum wrote:
> A bit of housekeeping switching the driver to the BIT()
> macro.
Looks good. I hope you've at least compiled the driver? :)
Acked-by: Petko Manolov <petkan@nucleusys.com>
cheers,
Petko
> Signed-off-by: Oliver Neukum <oneukum@suse.com>
> ---
> drivers/net/usb/rtl8150.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
> index 59dbdbb5feff..1ed85fba1a7c 100644
> --- a/drivers/net/usb/rtl8150.c
> +++ b/drivers/net/usb/rtl8150.c
> @@ -41,7 +41,7 @@
> #define ANLP 0x0146
> #define AER 0x0148
> #define CSCR 0x014C /* This one has the link status */
> -#define CSCR_LINK_STATUS (1 << 3)
> +#define CSCR_LINK_STATUS BIT(3)
>
> #define IDR_EEPROM 0x1202
>
> @@ -59,20 +59,20 @@
>
>
> /* Transmit status register errors */
> -#define TSR_ECOL (1<<5)
> -#define TSR_LCOL (1<<4)
> -#define TSR_LOSS_CRS (1<<3)
> -#define TSR_JBR (1<<2)
> +#define TSR_ECOL BIT(5)
> +#define TSR_LCOL BIT(4)
> +#define TSR_LOSS_CRS BIT(3)
> +#define TSR_JBR BIT(2)
> #define TSR_ERRORS (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
> /* Receive status register errors */
> -#define RSR_CRC (1<<2)
> -#define RSR_FAE (1<<1)
> +#define RSR_CRC BIT(2)
> +#define RSR_FAE BIT(1)
> #define RSR_ERRORS (RSR_CRC | RSR_FAE)
>
> /* Media status register definitions */
> -#define MSR_DUPLEX (1<<4)
> -#define MSR_SPEED (1<<3)
> -#define MSR_LINK (1<<2)
> +#define MSR_DUPLEX BIT(4)
> +#define MSR_SPEED BIT(3)
> +#define MSR_LINK BIT(2)
>
> /* Interrupt pipe data */
> #define INT_TSR 0x00
> --
> 2.16.4
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] rtl8150: switch to BIT macro
2019-05-09 14:34 ` Petko Manolov
@ 2019-05-09 16:49 ` David Miller
0 siblings, 0 replies; 3+ messages in thread
From: David Miller @ 2019-05-09 16:49 UTC (permalink / raw)
To: petkan; +Cc: oneukum, netdev
From: Petko Manolov <petkan@nucleusys.com>
Date: Thu, 9 May 2019 17:34:41 +0300
> On 19-05-09 11:01:06, Oliver Neukum wrote:
>> A bit of housekeeping switching the driver to the BIT()
>> macro.
>
> Looks good. I hope you've at least compiled the driver? :)
>
> Acked-by: Petko Manolov <petkan@nucleusys.com>
net-next is closed for cleanups like this, please resubmit when it opens
back up. Thank you.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-09 16:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-09 9:01 [PATCH] rtl8150: switch to BIT macro Oliver Neukum
2019-05-09 14:34 ` Petko Manolov
2019-05-09 16:49 ` David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).