netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "René van Dorst" <opensource@vdorst.com>
To: John Crispin <john@phrozen.org>,
	Sean Wang <sean.wang@mediatek.com>,
	Nelson Chang <nelson.chang@mediatek.com>,
	"David S . Miller" <davem@davemloft.net>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-mips@vger.kernel.org,
	"Russell King" <linux@armlinux.org.uk>,
	"Frank Wunderlich" <frank-w@public-files.de>,
	"Stefan Roese" <sr@denx.de>,
	"René van Dorst" <opensource@vdorst.com>
Subject: [PATCH net-next v3 3/3] dt-bindings: net: ethernet: Update mt7622 docs and dts to reflect the new phylink API
Date: Fri, 23 Aug 2019 15:45:16 +0200	[thread overview]
Message-ID: <20190823134516.27559-4-opensource@vdorst.com> (raw)
In-Reply-To: <20190823134516.27559-1-opensource@vdorst.com>

This patch the removes the recently added mediatek,physpeed property.
Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit.
See mt7622-bananapi-bpi-r64.dts for a working example.

Signed-off-by: René van Dorst <opensource@vdorst.com>
--
v2->v3:
* no change
v1->v2:
* SGMII port only support BASE-X at 2.5Gbit.
---
 .../arm/mediatek/mediatek,sgmiisys.txt        |  2 --
 .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  | 28 +++++++++++++------
 arch/arm64/boot/dts/mediatek/mt7622.dtsi      |  1 -
 3 files changed, 19 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
index f5518f26a914..30cb645c0e54 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
@@ -9,8 +9,6 @@ Required Properties:
 	- "mediatek,mt7622-sgmiisys", "syscon"
 	- "mediatek,mt7629-sgmiisys", "syscon"
 - #clock-cells: Must be 1
-- mediatek,physpeed: Should be one of "auto", "1000" or "2500" to match up
-		     the capability of the target PHY.
 
 The SGMIISYS controller uses the common clk binding from
 Documentation/devicetree/bindings/clock/clock-bindings.txt
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 710c5c3d87d3..83e10591e0e5 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -115,24 +115,34 @@
 };
 
 &eth {
-	pinctrl-names = "default";
-	pinctrl-0 = <&eth_pins>;
 	status = "okay";
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
 
 	gmac1: mac@1 {
 		compatible = "mediatek,eth-mac";
 		reg = <1>;
-		phy-handle = <&phy5>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
 	};
 
-	mdio-bus {
+	mdio: mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			phy-mode = "sgmii";
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index d1e13d340e26..dac51e98204c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -931,6 +931,5 @@
 			     "syscon";
 		reg = <0 0x1b128000 0 0x3000>;
 		#clock-cells = <1>;
-		mediatek,physpeed = "2500";
 	};
 };
-- 
2.20.1


  parent reply	other threads:[~2019-08-23 13:45 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23 13:45 [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK René van Dorst
2019-08-23 13:45 ` [PATCH net-next v3 1/3] net: ethernet: mediatek: Add basic PHYLINK support René van Dorst
2019-08-24  9:11   ` Russell King - ARM Linux admin
2019-08-24 12:33     ` René van Dorst
2019-08-23 13:45 ` [PATCH net-next v3 2/3] net: ethernet: mediatek: Re-add support SGMII René van Dorst
2019-08-24  9:21   ` Russell King - ARM Linux admin
2019-08-24 13:11     ` René van Dorst
2019-08-24 13:32       ` Russell King - ARM Linux admin
2019-08-25 11:41         ` René van Dorst
2019-08-23 13:45 ` René van Dorst [this message]
2019-08-23 17:56 ` Aw: [PATCH net-next v3 0/3] net: ethernet: mediatek: convert to PHYLINK Frank Wunderlich
2019-08-24  7:41   ` René van Dorst

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190823134516.27559-4-opensource@vdorst.com \
    --to=opensource@vdorst.com \
    --cc=davem@davemloft.net \
    --cc=frank-w@public-files.de \
    --cc=john@phrozen.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=matthias.bgg@gmail.com \
    --cc=nelson.chang@mediatek.com \
    --cc=netdev@vger.kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=sr@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).