From: Marek Vasut <marex@denx.de>
To: netdev@vger.kernel.org
Cc: Marek Vasut <marex@denx.de>, Andrew Lunn <andrew@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
George McCollister <george.mccollister@gmail.com>,
Tristram Ha <Tristram.Ha@microchip.com>,
Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
Woojung Huh <woojung.huh@microchip.com>
Subject: [PATCH] net: dsa: microchip: Always set regmap stride to 1
Date: Sat, 21 Sep 2019 19:53:09 +0200 [thread overview]
Message-ID: <20190921175309.2195-1-marex@denx.de> (raw)
The regmap stride is set to 1 for regmap describing 8bit registers already.
However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This
is not correct, as the switch protocol supports unaligned register reads
and writes and the KSZ87xx even uses such unaligned register accesses to
read e.g. MIB counter.
This patch fixes MIB counter access on KSZ87xx.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
---
drivers/net/dsa/microchip/ksz_common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index a24d8e61fbe7..dd60d0837fc6 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -303,7 +303,7 @@ static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
{ \
.name = #width, \
.val_bits = (width), \
- .reg_stride = (width) / 8, \
+ .reg_stride = 1, \
.reg_bits = (regbits) + (regalign), \
.pad_bits = (regpad), \
.max_register = BIT(regbits) - 1, \
--
2.23.0.rc1
next reply other threads:[~2019-09-21 17:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-21 17:53 Marek Vasut [this message]
2019-09-22 17:58 ` [PATCH] net: dsa: microchip: Always set regmap stride to 1 Florian Fainelli
2019-09-25 11:44 ` David Miller
2019-09-25 22:09 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190921175309.2195-1-marex@denx.de \
--to=marex@denx.de \
--cc=Tristram.Ha@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=george.mccollister@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).