[PATCH AUTOSEL 4.19 10/26] ieee802154: ca8210: prevent memory leak

[PATCH AUTOSEL 4.19 10/26] ieee802154: ca8210: prevent memory leak

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 6402939ec86eaf226c8b8ae00ed983936b164908 ]

In ca8210_probe the allocated pdata needs to be assigned to
spi_device->dev.platform_data before calling ca8210_get_platform_data.
Othrwise when ca8210_get_platform_data fails pdata cannot be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190917224713.26371-1-navid.emamdoost@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ieee802154/ca8210.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
index b2ff903a9cb6e..38a41651e451c 100644
--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -3151,12 +3151,12 @@ static int ca8210_probe(struct spi_device *spi_device)
 		goto error;
 	}
 
+	priv->spi->dev.platform_data = pdata;
 	ret = ca8210_get_platform_data(priv->spi, pdata);
 	if (ret) {
 		dev_crit(&spi_device->dev, "ca8210_get_platform_data failed\n");
 		goto error;
 	}
-	priv->spi->dev.platform_data = pdata;
 
 	ret = ca8210_dev_com_init(priv);
 	if (ret) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 12/26] net: dsa: qca8k: Use up to 7 ports for all operations

[Sasha Levin]

From: Michal Vokáč <michal.vokac@ysoft.com>

[ Upstream commit 7ae6d93c8f052b7a77ba56ed0f654e22a2876739 ]

The QCA8K family supports up to 7 ports. So use the existing
QCA8K_NUM_PORTS define to allocate the switch structure and limit all
operations with the switch ports.

This was not an issue until commit 0394a63acfe2 ("net: dsa: enable and
disable all ports") disabled all unused ports. Since the unused ports 7-11
are outside of the correct register range on this switch some registers
were rewritten with invalid content.

Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Fixes: a0c02161ecfc ("net: dsa: variable number of ports")
Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/qca8k.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index bdd8f2df66303..33232cc9fb04d 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -543,7 +543,7 @@ qca8k_setup(struct dsa_switch *ds)
 		    BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
 
 	/* Setup connection between CPU port & user ports */
-	for (i = 0; i < DSA_MAX_PORTS; i++) {
+	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
 		/* CPU port gets connected to all user ports of the switch */
 		if (dsa_is_cpu_port(ds, i)) {
 			qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT),
@@ -897,7 +897,7 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 	if (id != QCA8K_ID_QCA8337)
 		return -ENODEV;
 
-	priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS);
+	priv->ds = dsa_switch_alloc(&mdiodev->dev, QCA8K_NUM_PORTS);
 	if (!priv->ds)
 		return -ENOMEM;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 16/26] nl80211: fix null pointer dereference

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit b501426cf86e70649c983c52f4c823b3c40d72a3 ]

If the interface is not in MESH mode, the command 'iw wlanx mpath del'
will cause kernel panic.

The root cause is null pointer access in mpp_flush_by_proxy(), as the
pointer 'sdata->u.mesh.mpp_paths' is NULL for non MESH interface.

Unable to handle kernel NULL pointer dereference at virtual address 00000068
[...]
PC is at _raw_spin_lock_bh+0x20/0x5c
LR is at mesh_path_del+0x1c/0x17c [mac80211]
[...]
Process iw (pid: 4537, stack limit = 0xd83e0238)
[...]
[<c021211c>] (_raw_spin_lock_bh) from [<bf8c7648>] (mesh_path_del+0x1c/0x17c [mac80211])
[<bf8c7648>] (mesh_path_del [mac80211]) from [<bf6cdb7c>] (extack_doit+0x20/0x68 [compat])
[<bf6cdb7c>] (extack_doit [compat]) from [<c05c309c>] (genl_rcv_msg+0x274/0x30c)
[<c05c309c>] (genl_rcv_msg) from [<c05c25d8>] (netlink_rcv_skb+0x58/0xac)
[<c05c25d8>] (netlink_rcv_skb) from [<c05c2e14>] (genl_rcv+0x20/0x34)
[<c05c2e14>] (genl_rcv) from [<c05c1f90>] (netlink_unicast+0x11c/0x204)
[<c05c1f90>] (netlink_unicast) from [<c05c2420>] (netlink_sendmsg+0x30c/0x370)
[<c05c2420>] (netlink_sendmsg) from [<c05886d0>] (sock_sendmsg+0x70/0x84)
[<c05886d0>] (sock_sendmsg) from [<c0589f4c>] (___sys_sendmsg.part.3+0x188/0x228)
[<c0589f4c>] (___sys_sendmsg.part.3) from [<c058add4>] (__sys_sendmsg+0x4c/0x70)
[<c058add4>] (__sys_sendmsg) from [<c0208c80>] (ret_fast_syscall+0x0/0x44)
Code: e2822c02 e2822001 e5832004 f590f000 (e1902f9f)
---[ end trace bbd717600f8f884d ]---

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Link: https://lore.kernel.org/r/1569485810-761-1-git-send-email-miaoqing@codeaurora.org
[trim useless data from commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/nl80211.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 6168db3c35e4c..9af8e5c60e13d 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -5803,6 +5803,9 @@ static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info)
 	if (!rdev->ops->del_mpath)
 		return -EOPNOTSUPP;
 
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+		return -EOPNOTSUPP;
+
 	return rdev_del_mpath(rdev, dev, dst);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 17/26] mac80211: fix txq null pointer dereference

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 8ed31a264065ae92058ce54aa3cc8da8d81dc6d7 ]

If the interface type is P2P_DEVICE or NAN, read the file of
'/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a
NULL pointer dereference. As for those interface type, the
pointer sdata->vif.txq is NULL.

Unable to handle kernel NULL pointer dereference at virtual address 00000011
CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1
task: ffffffc0337e4880 task.stack: ffffff800cd20000
PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
[...]
Process cat (pid: 30936, stack limit = 0xffffff800cd20000)
[...]
[<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
[<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211]
[<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211]
[<ffffff80082eff94>] full_proxy_read+0x2c/0x48
[<ffffff80081eef00>] __vfs_read+0x2c/0xd4
[<ffffff80081ef084>] vfs_read+0x8c/0x108
[<ffffff80081ef494>] SyS_read+0x40/0x7c

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/1569549796-8223-1-git-send-email-miaoqing@codeaurora.org
[trim useless data from commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/debugfs_netdev.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index d37d4acafebf5..316250ae90712 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -490,9 +490,14 @@ static ssize_t ieee80211_if_fmt_aqm(
 	const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
 {
 	struct ieee80211_local *local = sdata->local;
-	struct txq_info *txqi = to_txq_info(sdata->vif.txq);
+	struct txq_info *txqi;
 	int len;
 
+	if (!sdata->vif.txq)
+		return 0;
+
+	txqi = to_txq_info(sdata->vif.txq);
+
 	spin_lock_bh(&local->fq.lock);
 	rcu_read_lock();
 
@@ -659,7 +664,9 @@ static void add_common_files(struct ieee80211_sub_if_data *sdata)
 	DEBUGFS_ADD(rc_rateidx_vht_mcs_mask_5ghz);
 	DEBUGFS_ADD(hw_queues);
 
-	if (sdata->local->ops->wake_tx_queue)
+	if (sdata->local->ops->wake_tx_queue &&
+	    sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE &&
+	    sdata->vif.type != NL80211_IFTYPE_NAN)
 		DEBUGFS_ADD(aqm);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 18/26] netfilter: nft_connlimit: disable bh on garbage collection

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 34a4c95abd25ab41fb390b985a08a651b1fa0b0f ]

BH must be disabled when invoking nf_conncount_gc_list() to perform
garbage collection, otherwise deadlock might happen.

  nf_conncount_add+0x1f/0x50 [nf_conncount]
  nft_connlimit_eval+0x4c/0xe0 [nft_connlimit]
  nft_dynset_eval+0xb5/0x100 [nf_tables]
  nft_do_chain+0xea/0x420 [nf_tables]
  ? sch_direct_xmit+0x111/0x360
  ? noqueue_init+0x10/0x10
  ? __qdisc_run+0x84/0x510
  ? tcp_packet+0x655/0x1610 [nf_conntrack]
  ? ip_finish_output2+0x1a7/0x430
  ? tcp_error+0x130/0x150 [nf_conntrack]
  ? nf_conntrack_in+0x1fc/0x4c0 [nf_conntrack]
  nft_do_chain_ipv4+0x66/0x80 [nf_tables]
  nf_hook_slow+0x44/0xc0
  ip_rcv+0xb5/0xd0
  ? ip_rcv_finish_core.isra.19+0x360/0x360
  __netif_receive_skb_one_core+0x52/0x70
  netif_receive_skb_internal+0x34/0xe0
  napi_gro_receive+0xba/0xe0
  e1000_clean_rx_irq+0x1e9/0x420 [e1000e]
  e1000e_poll+0xbe/0x290 [e1000e]
  net_rx_action+0x149/0x3b0
  __do_softirq+0xde/0x2d8
  irq_exit+0xba/0xc0
  do_IRQ+0x85/0xd0
  common_interrupt+0xf/0xf
  </IRQ>
  RIP: 0010:nf_conncount_gc_list+0x3b/0x130 [nf_conncount]

Fixes: 2f971a8f4255 ("netfilter: nf_conncount: move all list iterations under spinlock")
Reported-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_connlimit.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nft_connlimit.c b/net/netfilter/nft_connlimit.c
index af1497ab94642..69d6173f91e2b 100644
--- a/net/netfilter/nft_connlimit.c
+++ b/net/netfilter/nft_connlimit.c
@@ -218,8 +218,13 @@ static void nft_connlimit_destroy_clone(const struct nft_ctx *ctx,
 static bool nft_connlimit_gc(struct net *net, const struct nft_expr *expr)
 {
 	struct nft_connlimit *priv = nft_expr_priv(expr);
+	bool ret;
 
-	return nf_conncount_gc_list(net, &priv->list);
+	local_bh_disable();
+	ret = nf_conncount_gc_list(net, &priv->list);
+	local_bh_enable();
+
+	return ret;
 }
 
 static struct nft_expr_type nft_connlimit_type;
-- 
2.20.1

[PATCH AUTOSEL 4.19 19/26] net: dsa: rtl8366rb: add missing of_node_put after calling of_get_child_by_name

[Sasha Levin]

From: Wen Yang <wenyang@linux.alibaba.com>

[ Upstream commit f32eb9d80470dab05df26b6efd02d653c72e6a11 ]

of_node_put needs to be called when the device node which is got
from of_get_child_by_name finished using.
irq_domain_add_linear() also calls of_node_get() to increase refcount,
so irq_domain will not be affected when it is released.

Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/rtl8366rb.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index a4d5049df6928..f4b14b6acd22d 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -507,7 +507,8 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 	irq = of_irq_get(intc, 0);
 	if (irq <= 0) {
 		dev_err(smi->dev, "failed to get parent IRQ\n");
-		return irq ? irq : -EINVAL;
+		ret = irq ? irq : -EINVAL;
+		goto out_put_node;
 	}
 
 	/* This clears the IRQ status register */
@@ -515,7 +516,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 			  &val);
 	if (ret) {
 		dev_err(smi->dev, "can't read interrupt status\n");
-		return ret;
+		goto out_put_node;
 	}
 
 	/* Fetch IRQ edge information from the descriptor */
@@ -537,7 +538,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 				 val);
 	if (ret) {
 		dev_err(smi->dev, "could not configure IRQ polarity\n");
-		return ret;
+		goto out_put_node;
 	}
 
 	ret = devm_request_threaded_irq(smi->dev, irq, NULL,
@@ -545,7 +546,7 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 					"RTL8366RB", smi);
 	if (ret) {
 		dev_err(smi->dev, "unable to request irq: %d\n", ret);
-		return ret;
+		goto out_put_node;
 	}
 	smi->irqdomain = irq_domain_add_linear(intc,
 					       RTL8366RB_NUM_INTERRUPT,
@@ -553,12 +554,15 @@ static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi)
 					       smi);
 	if (!smi->irqdomain) {
 		dev_err(smi->dev, "failed to create IRQ domain\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_put_node;
 	}
 	for (i = 0; i < smi->num_ports; i++)
 		irq_set_parent(irq_create_mapping(smi->irqdomain, i), irq);
 
-	return 0;
+out_put_node:
+	of_node_put(intc);
+	return ret;
 }
 
 static int rtl8366rb_set_addr(struct realtek_smi *smi)
-- 
2.20.1

[PATCH AUTOSEL 4.19 21/26] net: hisilicon: Fix usage of uninitialized variable in function mdio_sc_cfg_reg_write()

[Sasha Levin]

From: Yizhuo <yzhai003@ucr.edu>

[ Upstream commit 53de429f4e88f538f7a8ec2b18be8c0cd9b2c8e1 ]

In function mdio_sc_cfg_reg_write(), variable "reg_value" could be
uninitialized if regmap_read() fails. However, "reg_value" is used
to decide the control flow later in the if statement, which is
potentially unsafe.

Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns_mdio.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c
index baf5cc251f329..9a3bc0994a1db 100644
--- a/drivers/net/ethernet/hisilicon/hns_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns_mdio.c
@@ -156,11 +156,15 @@ static int mdio_sc_cfg_reg_write(struct hns_mdio_device *mdio_dev,
 {
 	u32 time_cnt;
 	u32 reg_value;
+	int ret;
 
 	regmap_write(mdio_dev->subctrl_vbase, cfg_reg, set_val);
 
 	for (time_cnt = MDIO_TIMEOUT; time_cnt; time_cnt--) {
-		regmap_read(mdio_dev->subctrl_vbase, st_reg, &reg_value);
+		ret = regmap_read(mdio_dev->subctrl_vbase, st_reg, &reg_value);
+		if (ret)
+			return ret;
+
 		reg_value &= st_msk;
 		if ((!!check_st) == (!!reg_value))
 			break;
-- 
2.20.1

[PATCH AUTOSEL 4.19 22/26] lib: textsearch: fix escapes in example code

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 2105b52e30debe7f19f3218598d8ae777dcc6776 ]

This textsearch code example does not need the '\' escapes and they can
be misleading to someone reading the example. Also, gcc and sparse warn
that the "\%d" is an unknown escape sequence.

Fixes: 5968a70d7af5 ("textsearch: fix kernel-doc warnings and add kernel-api section")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/textsearch.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/textsearch.c b/lib/textsearch.c
index 5939549c0e7bc..9135c29add624 100644
--- a/lib/textsearch.c
+++ b/lib/textsearch.c
@@ -93,9 +93,9 @@
  *       goto errout;
  *   }
  *
- *   pos = textsearch_find_continuous(conf, \&state, example, strlen(example));
+ *   pos = textsearch_find_continuous(conf, &state, example, strlen(example));
  *   if (pos != UINT_MAX)
- *       panic("Oh my god, dancing chickens at \%d\n", pos);
+ *       panic("Oh my god, dancing chickens at %d\n", pos);
  *
  *   textsearch_destroy(conf);
  */
-- 
2.20.1

[PATCH AUTOSEL 4.19 24/26] r8152: Set macpassthru in reset_resume callback

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit a54cdeeb04fc719e4c7f19d6e28dba7ea86cee5b ]

r8152 may fail to establish network connection after resume from system
suspend.

If the USB port connects to r8152 lost its power during system suspend,
the MAC address was written before is lost. The reason is that The MAC
address doesn't get written again in its reset_resume callback.

So let's set MAC address again in reset_resume callback. Also remove
unnecessary lock as no other locking attempt will happen during
reset_resume.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index a065a6184f7e4..a291e5f2daef6 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -4474,10 +4474,9 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
 	struct r8152 *tp = usb_get_intfdata(intf);
 
 	clear_bit(SELECTIVE_SUSPEND, &tp->flags);
-	mutex_lock(&tp->control);
 	tp->rtl_ops.init(tp);
 	queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
-	mutex_unlock(&tp->control);
+	set_ethernet_addr(tp);
 	return rtl8152_resume(intf);
 }
 
-- 
2.20.1