[PATCH] can: peak_usb: fix slab info leak

[PATCH] can: peak_usb: fix slab info leak

[Johan Hovold]

Fix a small slab info leak due to a failure to clear the command buffer
at allocation.

The first 16 bytes of the command buffer are always sent to the device
in pcan_usb_send_cmd() even though only the first two may have been
initialised in case no argument payload is provided (e.g. when waiting
for a response).

Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Cc: stable <stable@vger.kernel.org>     # 3.4
Reported-by: syzbot+863724e7128e14b26732@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/net/can/usb/peak_usb/pcan_usb_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
index 65dce642b86b..0b7766b715fd 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -750,7 +750,7 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter,
 	dev = netdev_priv(netdev);
 
 	/* allocate a buffer large enough to send commands */
-	dev->cmd_buf = kmalloc(PCAN_USB_MAX_CMD_LEN, GFP_KERNEL);
+	dev->cmd_buf = kzalloc(PCAN_USB_MAX_CMD_LEN, GFP_KERNEL);
 	if (!dev->cmd_buf) {
 		err = -ENOMEM;
 		goto lbl_free_candev;
-- 
2.23.0