[net v2 0/7][pull request] Intel Wired LAN Driver Updates 2019-11-01

[net v2 0/7][pull request] Intel Wired LAN Driver Updates 2019-11-01

[Jeff Kirsher]

This series contains updates to e1000, igb, igc, ixgbe, i40e and driver
documentation.

Lyude Paul fixes an issue where a fatal read error occurs when the
device is unplugged from the machine.  So change the read error into a
warn while the device is still present.

Manfred Rudigier found that the i350 device was not apart of the "Media
Auto Sense" feature, yet the device supports it.  So add the missing
i350 device to the check and fix an issue where the media auto sense
would flip/flop when no cable was connected to the port causing spurious
kernel log messages.

I fixed an issue where the fix to resolve receive buffer starvation was
applied in more than one place in the driver, one being the incorrect
location in the i40e driver.

Wenwen Wang fixes a potential memory leak in e1000 where allocated
memory is not properly cleaned up in one of the error paths.

Jonathan Neuschäfer cleans up the driver documentation to be consistent
and remove the footnote reference, since the footnote no longer exists in
the documentation.

Igor Pylypiv cleans up a duplicate clearing of a bit, no need to clear
it twice.

v2: Fixed alignment issue in patch 3 of the series based on community
    feedback.

The following are changes since commit 6d6f0383b697f004c65823c2b64240912f18515d:
  netdevsim: Fix use-after-free during device dismantle
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue 1GbE

Igor Pylypiv (1):
  ixgbe: Remove duplicate clear_bit() call

Jeff Kirsher (1):
  i40e: Fix receive buffer starvation for AF_XDP

Jonathan Neuschäfer (1):
  Documentation: networking: device drivers: Remove stray asterisks

Lyude Paul (1):
  igb/igc: Don't warn on fatal read failures when the device is removed

Manfred Rudigier (2):
  igb: Enable media autosense for the i350.
  igb: Fix constant media auto sense switching when no cable is
    connected

Wenwen Wang (1):
  e1000: fix memory leaks

 .../networking/device_drivers/intel/e100.rst       | 14 +++++++-------
 .../networking/device_drivers/intel/e1000.rst      | 12 ++++++------
 .../networking/device_drivers/intel/e1000e.rst     | 14 +++++++-------
 .../networking/device_drivers/intel/fm10k.rst      | 10 +++++-----
 .../networking/device_drivers/intel/i40e.rst       |  8 ++++----
 .../networking/device_drivers/intel/iavf.rst       |  8 ++++----
 .../networking/device_drivers/intel/ice.rst        |  6 +++---
 .../networking/device_drivers/intel/igb.rst        | 12 ++++++------
 .../networking/device_drivers/intel/igbvf.rst      |  6 +++---
 .../networking/device_drivers/intel/ixgbe.rst      | 10 +++++-----
 .../networking/device_drivers/intel/ixgbevf.rst    |  6 +++---
 .../networking/device_drivers/pensando/ionic.rst   |  6 +++---
 drivers/net/ethernet/intel/e1000/e1000_ethtool.c   |  7 +++----
 drivers/net/ethernet/intel/i40e/i40e_xsk.c         |  5 -----
 drivers/net/ethernet/intel/igb/e1000_82575.c       |  2 +-
 drivers/net/ethernet/intel/igb/igb_main.c          |  8 +++++---
 drivers/net/ethernet/intel/igc/igc_main.c          |  3 ++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c      |  1 -
 18 files changed, 67 insertions(+), 71 deletions(-)

-- 
2.21.0

[net v2 1/7] igb/igc: Don't warn on fatal read failures when the device is removed

[Jeff Kirsher]

From: Lyude Paul <lyude@redhat.com>

Fatal read errors are worth warning about, unless of course the device
was just unplugged from the machine - something that's a rather normal
occurrence when the igb/igc adapter is located on a Thunderbolt dock. So,
let's only WARN() if there's a fatal read error while the device is
still present.

This fixes the following WARN splat that's been appearing whenever I
unplug my Caldigit TS3 Thunderbolt dock from my laptop:

  igb 0000:09:00.0 enp9s0: PCIe link lost
  ------------[ cut here ]------------
  igb: Failed to read reg 0x18!
  WARNING: CPU: 7 PID: 516 at
  drivers/net/ethernet/intel/igb/igb_main.c:756 igb_rd32+0x57/0x6a [igb]
  Modules linked in: igb dca thunderbolt fuse vfat fat elan_i2c mei_wdt
  mei_hdcp i915 wmi_bmof intel_wmi_thunderbolt iTCO_wdt
  iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp joydev
  coretemp crct10dif_pclmul crc32_pclmul i2c_algo_bit ghash_clmulni_intel
  intel_cstate drm_kms_helper intel_uncore syscopyarea sysfillrect
  sysimgblt fb_sys_fops intel_rapl_perf intel_xhci_usb_role_switch mei_me
  drm roles idma64 i2c_i801 ucsi_acpi typec_ucsi mei intel_lpss_pci
  processor_thermal_device typec intel_pch_thermal intel_soc_dts_iosf
  intel_lpss int3403_thermal thinkpad_acpi wmi int340x_thermal_zone
  ledtrig_audio int3400_thermal acpi_thermal_rel acpi_pad video
  pcc_cpufreq ip_tables serio_raw nvme nvme_core crc32c_intel uas
  usb_storage e1000e i2c_dev
  CPU: 7 PID: 516 Comm: kworker/u16:3 Not tainted 5.2.0-rc1Lyude-Test+ #14
  Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018
  Workqueue: kacpi_hotplug acpi_hotplug_work_fn
  RIP: 0010:igb_rd32+0x57/0x6a [igb]
  Code: 87 b8 fc ff ff 48 c7 47 08 00 00 00 00 48 c7 c6 33 42 9b c0 4c 89
  c7 e8 47 45 cd dc 89 ee 48 c7 c7 43 42 9b c0 e8 c1 94 71 dc <0f> 0b eb
  08 8b 00 ff c0 75 b0 eb c8 44 89 e0 5d 41 5c c3 0f 1f 44
  RSP: 0018:ffffba5801cf7c48 EFLAGS: 00010286
  RAX: 0000000000000000 RBX: ffff9e7956608840 RCX: 0000000000000007
  RDX: 0000000000000000 RSI: ffffba5801cf7b24 RDI: ffff9e795e3d6a00
  RBP: 0000000000000018 R08: 000000009dec4a01 R09: ffffffff9e61018f
  R10: 0000000000000000 R11: ffffba5801cf7ae5 R12: 00000000ffffffff
  R13: ffff9e7956608840 R14: ffff9e795a6f10b0 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff9e795e3c0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000564317bc4088 CR3: 000000010e00a006 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   igb_release_hw_control+0x1a/0x30 [igb]
   igb_remove+0xc5/0x14b [igb]
   pci_device_remove+0x3b/0x93
   device_release_driver_internal+0xd7/0x17e
   pci_stop_bus_device+0x36/0x75
   pci_stop_bus_device+0x66/0x75
   pci_stop_bus_device+0x66/0x75
   pci_stop_and_remove_bus_device+0xf/0x19
   trim_stale_devices+0xc5/0x13a
   ? __pm_runtime_resume+0x6e/0x7b
   trim_stale_devices+0x103/0x13a
   ? __pm_runtime_resume+0x6e/0x7b
   trim_stale_devices+0x103/0x13a
   acpiphp_check_bridge+0xd8/0xf5
   acpiphp_hotplug_notify+0xf7/0x14b
   ? acpiphp_check_bridge+0xf5/0xf5
   acpi_device_hotplug+0x357/0x3b5
   acpi_hotplug_work_fn+0x1a/0x23
   process_one_work+0x1a7/0x296
   worker_thread+0x1a8/0x24c
   ? process_scheduled_works+0x2c/0x2c
   kthread+0xe9/0xee
   ? kthread_destroy_worker+0x41/0x41
   ret_from_fork+0x35/0x40
  ---[ end trace 252bf10352c63d22 ]---

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 47e16692b26b ("igb/igc: warn when fatal read failure happens")
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 3 ++-
 drivers/net/ethernet/intel/igc/igc_main.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 105b0624081a..31b9e02875cc 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -753,7 +753,8 @@ u32 igb_rd32(struct e1000_hw *hw, u32 reg)
 		struct net_device *netdev = igb->netdev;
 		hw->hw_addr = NULL;
 		netdev_err(netdev, "PCIe link lost\n");
-		WARN(1, "igb: Failed to read reg 0x%x!\n", reg);
+		WARN(pci_device_is_present(igb->pdev),
+		     "igb: Failed to read reg 0x%x!\n", reg);
 	}
 
 	return value;
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 63b62d74f961..8e424dfab12e 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -4047,7 +4047,8 @@ u32 igc_rd32(struct igc_hw *hw, u32 reg)
 		hw->hw_addr = NULL;
 		netif_device_detach(netdev);
 		netdev_err(netdev, "PCIe link lost, device now detached\n");
-		WARN(1, "igc: Failed to read reg 0x%x!\n", reg);
+		WARN(pci_device_is_present(igc->pdev),
+		     "igc: Failed to read reg 0x%x!\n", reg);
 	}
 
 	return value;
-- 
2.21.0

[net v2 2/7] igb: Enable media autosense for the i350.

[Jeff Kirsher]

From: Manfred Rudigier <manfred.rudigier@omicronenergy.com>

This patch enables the hardware feature "Media Auto Sense" also on the
i350. It works in the same way as on the 82850 devices. Hardware designs
using dual PHYs (fiber/copper) can enable this feature by setting the MAS
enable bits in the NVM_COMPAT register (0x03) in the EEPROM.

Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +-
 drivers/net/ethernet/intel/igb/igb_main.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index 3ec2ce0725d5..8a6ef3514129 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -466,7 +466,7 @@ static s32 igb_init_mac_params_82575(struct e1000_hw *hw)
 			? igb_setup_copper_link_82575
 			: igb_setup_serdes_link_82575;
 
-	if (mac->type == e1000_82580) {
+	if (mac->type == e1000_82580 || mac->type == e1000_i350) {
 		switch (hw->device_id) {
 		/* feature not supported on these id's */
 		case E1000_DEV_ID_DH89XXCC_SGMII:
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 31b9e02875cc..17a961c3d6e4 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2371,7 +2371,7 @@ void igb_reset(struct igb_adapter *adapter)
 		adapter->ei.get_invariants(hw);
 		adapter->flags &= ~IGB_FLAG_MEDIA_RESET;
 	}
-	if ((mac->type == e1000_82575) &&
+	if ((mac->type == e1000_82575 || mac->type == e1000_i350) &&
 	    (adapter->flags & IGB_FLAG_MAS_ENABLE)) {
 		igb_enable_mas(adapter);
 	}
-- 
2.21.0

[net v2 3/7] igb: Fix constant media auto sense switching when no cable is connected

[Jeff Kirsher]

From: Manfred Rudigier <manfred.rudigier@omicronenergy.com>

At least on the i350 there is an annoying behavior that is maybe also
present on 82580 devices, but was probably not noticed yet as MAS is not
widely used.

If no cable is connected on both fiber/copper ports the media auto sense
code will constantly swap between them as part of the watchdog task and
produce many unnecessary kernel log messages.

The swap code responsible for this behavior (switching to fiber) should
not be executed if the current media type is copper and there is no signal
detected on the fiber port. In this case we can safely wait until the
AUTOSENSE_EN bit is cleared.

Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
v2: Fixed alignment issue with the wrapped line of code

 drivers/net/ethernet/intel/igb/igb_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 17a961c3d6e4..9148c62d9ac5 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2065,7 +2065,8 @@ static void igb_check_swap_media(struct igb_adapter *adapter)
 	if ((hw->phy.media_type == e1000_media_type_copper) &&
 	    (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) {
 		swap_now = true;
-	} else if (!(connsw & E1000_CONNSW_SERDESD)) {
+	} else if ((hw->phy.media_type != e1000_media_type_copper) &&
+		   !(connsw & E1000_CONNSW_SERDESD)) {
 		/* copper signal takes time to appear */
 		if (adapter->copper_tries < 4) {
 			adapter->copper_tries++;
-- 
2.21.0

[net v2 4/7] i40e: Fix receive buffer starvation for AF_XDP

[Jeff Kirsher]

Magnus's fix to resolve a potential receive buffer starvation for AF_XDP
got applied to both the i40e_xsk_umem_enable/disable() functions, when it
should have only been applied to the "enable".  So clean up the undesired
code in the disable function.

CC: Magnus Karlsson <magnus.karlsson@intel.com>
Fixes: 1f459bdc2007 ("i40e: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_xsk.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
index b1c3227ae4ab..a05dfecdd9b4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
@@ -157,11 +157,6 @@ static int i40e_xsk_umem_disable(struct i40e_vsi *vsi, u16 qid)
 		err = i40e_queue_pair_enable(vsi, qid);
 		if (err)
 			return err;
-
-		/* Kick start the NAPI context so that receiving will start */
-		err = i40e_xsk_wakeup(vsi->netdev, qid, XDP_WAKEUP_RX);
-		if (err)
-			return err;
 	}
 
 	return 0;
-- 
2.21.0

[net v2 5/7] e1000: fix memory leaks

[Jeff Kirsher]

From: Wenwen Wang <wenwen@cs.uga.edu>

In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if
e1000_up() fails, leading to memory leaks. Refactor the code to fix this
issue.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index 71d3d8854d8f..be56e631d693 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -607,6 +607,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
 	for (i = 0; i < adapter->num_rx_queues; i++)
 		rxdr[i].count = rxdr->count;
 
+	err = 0;
 	if (netif_running(adapter->netdev)) {
 		/* Try to get new resources before deleting old */
 		err = e1000_setup_all_rx_resources(adapter);
@@ -627,14 +628,13 @@ static int e1000_set_ringparam(struct net_device *netdev,
 		adapter->rx_ring = rxdr;
 		adapter->tx_ring = txdr;
 		err = e1000_up(adapter);
-		if (err)
-			goto err_setup;
 	}
 	kfree(tx_old);
 	kfree(rx_old);
 
 	clear_bit(__E1000_RESETTING, &adapter->flags);
-	return 0;
+	return err;
+
 err_setup_tx:
 	e1000_free_all_rx_resources(adapter);
 err_setup_rx:
@@ -646,7 +646,6 @@ static int e1000_set_ringparam(struct net_device *netdev,
 err_alloc_tx:
 	if (netif_running(adapter->netdev))
 		e1000_up(adapter);
-err_setup:
 	clear_bit(__E1000_RESETTING, &adapter->flags);
 	return err;
 }
-- 
2.21.0

[net v2 6/7] Documentation: networking: device drivers: Remove stray asterisks

[Jeff Kirsher]

From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>

These asterisks were once references to a line that said:
  "* Other names and brands may be claimed as the property of others."
But now, they serve no purpose; they can only irritate the reader.

Fixes: de3edab4276c ("e1000: update README for e1000")
Fixes: a3fb65680f65 ("e100.txt: Cleanup license info in kernel doc")
Fixes: da8c01c4502a ("e1000e.txt: Add e1000e documentation")
Fixes: f12a84a9f650 ("Documentation: fm10k: Add kernel documentation")
Fixes: b55c52b1938c ("igb.txt: Add igb documentation")
Fixes: c4e9b56e2442 ("igbvf.txt: Add igbvf Documentation")
Fixes: d7064f4c192c ("Documentation/networking/: Update Intel wired LAN driver documentation")
Fixes: c4b8c01112a1 ("ixgbevf.txt: Update ixgbevf documentation")
Fixes: 1e06edcc2f22 ("Documentation: i40e: Prepare documentation for RST conversion")
Fixes: 105bf2fe6b32 ("i40evf: add driver to kernel build system")
Fixes: 1fae869bcf3d ("Documentation: ice: Prepare documentation for RST conversion")
Fixes: df69ba43217d ("ionic: Add basic framework for IONIC Network device driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 .../networking/device_drivers/intel/e100.rst       | 14 +++++++-------
 .../networking/device_drivers/intel/e1000.rst      | 12 ++++++------
 .../networking/device_drivers/intel/e1000e.rst     | 14 +++++++-------
 .../networking/device_drivers/intel/fm10k.rst      | 10 +++++-----
 .../networking/device_drivers/intel/i40e.rst       |  8 ++++----
 .../networking/device_drivers/intel/iavf.rst       |  8 ++++----
 .../networking/device_drivers/intel/ice.rst        |  6 +++---
 .../networking/device_drivers/intel/igb.rst        | 12 ++++++------
 .../networking/device_drivers/intel/igbvf.rst      |  6 +++---
 .../networking/device_drivers/intel/ixgbe.rst      | 10 +++++-----
 .../networking/device_drivers/intel/ixgbevf.rst    |  6 +++---
 .../networking/device_drivers/pensando/ionic.rst   |  6 +++---
 12 files changed, 56 insertions(+), 56 deletions(-)

diff --git a/Documentation/networking/device_drivers/intel/e100.rst b/Documentation/networking/device_drivers/intel/e100.rst
index 2b9f4887beda..caf023cc88de 100644
--- a/Documentation/networking/device_drivers/intel/e100.rst
+++ b/Documentation/networking/device_drivers/intel/e100.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==============================================================
-Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
-==============================================================
+=============================================================
+Linux Base Driver for the Intel(R) PRO/100 Family of Adapters
+=============================================================
 
 June 1, 2018
 
@@ -21,7 +21,7 @@ Contents
 In This Release
 ===============
 
-This file describes the Linux* Base Driver for the Intel(R) PRO/100 Family of
+This file describes the Linux Base Driver for the Intel(R) PRO/100 Family of
 Adapters. This driver includes support for Itanium(R)2-based systems.
 
 For questions related to hardware requirements, refer to the documentation
@@ -138,9 +138,9 @@ version 1.6 or later is required for this functionality.
 The latest release of ethtool can be found from
 https://www.kernel.org/pub/software/network/ethtool/
 
-Enabling Wake on LAN* (WoL)
----------------------------
-WoL is provided through the ethtool* utility.  For instructions on
+Enabling Wake on LAN (WoL)
+--------------------------
+WoL is provided through the ethtool utility.  For instructions on
 enabling WoL with ethtool, refer to the ethtool man page.  WoL will be
 enabled on the system during the next shut down or reboot.  For this
 driver version, in order to enable WoL, the e100 driver must be loaded
diff --git a/Documentation/networking/device_drivers/intel/e1000.rst b/Documentation/networking/device_drivers/intel/e1000.rst
index 956560b6e745..4aaae0f7d6ba 100644
--- a/Documentation/networking/device_drivers/intel/e1000.rst
+++ b/Documentation/networking/device_drivers/intel/e1000.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-===========================================================
-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
+==========================================================
+Linux Base Driver for Intel(R) Ethernet Network Connection
+==========================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 1999 - 2013 Intel Corporation.
@@ -438,10 +438,10 @@ ethtool
   The latest release of ethtool can be found from
   https://www.kernel.org/pub/software/network/ethtool/
 
-Enabling Wake on LAN* (WoL)
----------------------------
+Enabling Wake on LAN (WoL)
+--------------------------
 
-  WoL is configured through the ethtool* utility.
+  WoL is configured through the ethtool utility.
 
   WoL will be enabled on the system during the next shut down or reboot.
   For this driver version, in order to enable WoL, the e1000 driver must be
diff --git a/Documentation/networking/device_drivers/intel/e1000e.rst b/Documentation/networking/device_drivers/intel/e1000e.rst
index 01999f05509c..f49cd370e7bf 100644
--- a/Documentation/networking/device_drivers/intel/e1000e.rst
+++ b/Documentation/networking/device_drivers/intel/e1000e.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-======================================================
-Linux* Driver for Intel(R) Ethernet Network Connection
-======================================================
+=====================================================
+Linux Driver for Intel(R) Ethernet Network Connection
+=====================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 2008-2018 Intel Corporation.
@@ -338,7 +338,7 @@ and higher cannot be forced. Use the autonegotiation advertising setting to
 manually set devices for 1 Gbps and higher.
 
 Speed, duplex, and autonegotiation advertising are configured through the
-ethtool* utility.
+ethtool utility.
 
 Caution: Only experienced network administrators should force speed and duplex
 or change autonegotiation advertising manually. The settings at the switch must
@@ -351,9 +351,9 @@ will not attempt to auto-negotiate with its link partner since those adapters
 operate only in full duplex and only at their native speed.
 
 
-Enabling Wake on LAN* (WoL)
----------------------------
-WoL is configured through the ethtool* utility.
+Enabling Wake on LAN (WoL)
+--------------------------
+WoL is configured through the ethtool utility.
 
 WoL will be enabled on the system during the next shut down or reboot. For
 this driver version, in order to enable WoL, the e1000e driver must be loaded
diff --git a/Documentation/networking/device_drivers/intel/fm10k.rst b/Documentation/networking/device_drivers/intel/fm10k.rst
index ac3269e34f55..4d279e64e221 100644
--- a/Documentation/networking/device_drivers/intel/fm10k.rst
+++ b/Documentation/networking/device_drivers/intel/fm10k.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==============================================================
-Linux* Base Driver for Intel(R) Ethernet Multi-host Controller
-==============================================================
+=============================================================
+Linux Base Driver for Intel(R) Ethernet Multi-host Controller
+=============================================================
 
 August 20, 2018
 Copyright(c) 2015-2018 Intel Corporation.
@@ -120,8 +120,8 @@ rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r
 Known Issues/Troubleshooting
 ============================
 
-Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS under Linux KVM
----------------------------------------------------------------------------------------
+Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS under Linux KVM
+-------------------------------------------------------------------------------------
 KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This
 includes traditional PCIe devices, as well as SR-IOV-capable devices based on
 the Intel Ethernet Controller XL710.
diff --git a/Documentation/networking/device_drivers/intel/i40e.rst b/Documentation/networking/device_drivers/intel/i40e.rst
index 848fd388fa6e..8a9b18573688 100644
--- a/Documentation/networking/device_drivers/intel/i40e.rst
+++ b/Documentation/networking/device_drivers/intel/i40e.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==================================================================
-Linux* Base Driver for the Intel(R) Ethernet Controller 700 Series
-==================================================================
+=================================================================
+Linux Base Driver for the Intel(R) Ethernet Controller 700 Series
+=================================================================
 
 Intel 40 Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -384,7 +384,7 @@ NOTE: You cannot set the speed for devices based on the Intel(R) Ethernet
 Network Adapter XXV710 based devices.
 
 Speed, duplex, and autonegotiation advertising are configured through the
-ethtool* utility.
+ethtool utility.
 
 Caution: Only experienced network administrators should force speed and duplex
 or change autonegotiation advertising manually. The settings at the switch must
diff --git a/Documentation/networking/device_drivers/intel/iavf.rst b/Documentation/networking/device_drivers/intel/iavf.rst
index cfc08842e32c..84ac7e75f363 100644
--- a/Documentation/networking/device_drivers/intel/iavf.rst
+++ b/Documentation/networking/device_drivers/intel/iavf.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==================================================================
-Linux* Base Driver for Intel(R) Ethernet Adaptive Virtual Function
-==================================================================
+=================================================================
+Linux Base Driver for Intel(R) Ethernet Adaptive Virtual Function
+=================================================================
 
 Intel Ethernet Adaptive Virtual Function Linux driver.
 Copyright(c) 2013-2018 Intel Corporation.
@@ -19,7 +19,7 @@ Contents
 Overview
 ========
 
-This file describes the iavf Linux* Base Driver. This driver was formerly
+This file describes the iavf Linux Base Driver. This driver was formerly
 called i40evf.
 
 The iavf driver supports the below mentioned virtual function devices and
diff --git a/Documentation/networking/device_drivers/intel/ice.rst b/Documentation/networking/device_drivers/intel/ice.rst
index c220aa2711c6..ee43ea57d443 100644
--- a/Documentation/networking/device_drivers/intel/ice.rst
+++ b/Documentation/networking/device_drivers/intel/ice.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-===================================================================
-Linux* Base Driver for the Intel(R) Ethernet Connection E800 Series
-===================================================================
+==================================================================
+Linux Base Driver for the Intel(R) Ethernet Connection E800 Series
+==================================================================
 
 Intel ice Linux driver.
 Copyright(c) 2018 Intel Corporation.
diff --git a/Documentation/networking/device_drivers/intel/igb.rst b/Documentation/networking/device_drivers/intel/igb.rst
index fc8cfaa5dcfa..87e560fe5eaa 100644
--- a/Documentation/networking/device_drivers/intel/igb.rst
+++ b/Documentation/networking/device_drivers/intel/igb.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-===========================================================
-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
+==========================================================
+Linux Base Driver for Intel(R) Ethernet Network Connection
+==========================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -129,9 +129,9 @@ version is required for this functionality. Download it at:
 https://www.kernel.org/pub/software/network/ethtool/
 
 
-Enabling Wake on LAN* (WoL)
----------------------------
-WoL is configured through the ethtool* utility.
+Enabling Wake on LAN (WoL)
+--------------------------
+WoL is configured through the ethtool utility.
 
 WoL will be enabled on the system during the next shut down or reboot. For
 this driver version, in order to enable WoL, the igb driver must be loaded
diff --git a/Documentation/networking/device_drivers/intel/igbvf.rst b/Documentation/networking/device_drivers/intel/igbvf.rst
index 9cddabe8108e..557fc020ef31 100644
--- a/Documentation/networking/device_drivers/intel/igbvf.rst
+++ b/Documentation/networking/device_drivers/intel/igbvf.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-============================================================
-Linux* Base Virtual Function Driver for Intel(R) 1G Ethernet
-============================================================
+===========================================================
+Linux Base Virtual Function Driver for Intel(R) 1G Ethernet
+===========================================================
 
 Intel Gigabit Virtual Function Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
diff --git a/Documentation/networking/device_drivers/intel/ixgbe.rst b/Documentation/networking/device_drivers/intel/ixgbe.rst
index c7d25483fedb..f1d5233e5e51 100644
--- a/Documentation/networking/device_drivers/intel/ixgbe.rst
+++ b/Documentation/networking/device_drivers/intel/ixgbe.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-=============================================================================
-Linux* Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
-=============================================================================
+===========================================================================
+Linux Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
+===========================================================================
 
 Intel 10 Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -519,8 +519,8 @@ The offload is also supported for ixgbe's VFs, but the VF must be set as
 Known Issues/Troubleshooting
 ============================
 
-Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS
------------------------------------------------------------------------
+Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS
+---------------------------------------------------------------------
 Linux KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM.
 This includes traditional PCIe devices, as well as SR-IOV-capable devices based
 on the Intel Ethernet Controller XL710.
diff --git a/Documentation/networking/device_drivers/intel/ixgbevf.rst b/Documentation/networking/device_drivers/intel/ixgbevf.rst
index 5d4977360157..76bbde736f21 100644
--- a/Documentation/networking/device_drivers/intel/ixgbevf.rst
+++ b/Documentation/networking/device_drivers/intel/ixgbevf.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-=============================================================
-Linux* Base Virtual Function Driver for Intel(R) 10G Ethernet
-=============================================================
+============================================================
+Linux Base Virtual Function Driver for Intel(R) 10G Ethernet
+============================================================
 
 Intel 10 Gigabit Virtual Function Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
diff --git a/Documentation/networking/device_drivers/pensando/ionic.rst b/Documentation/networking/device_drivers/pensando/ionic.rst
index 13935896bee6..c17d680cf334 100644
--- a/Documentation/networking/device_drivers/pensando/ionic.rst
+++ b/Documentation/networking/device_drivers/pensando/ionic.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==========================================================
-Linux* Driver for the Pensando(R) Ethernet adapter family
-==========================================================
+========================================================
+Linux Driver for the Pensando(R) Ethernet adapter family
+========================================================
 
 Pensando Linux Ethernet driver.
 Copyright(c) 2019 Pensando Systems, Inc
-- 
2.21.0

[net v2 7/7] ixgbe: Remove duplicate clear_bit() call

[Jeff Kirsher]

From: Igor Pylypiv <igor.pylypiv@gmail.com>

__IXGBE_RX_BUILD_SKB_ENABLED bit is already cleared.

Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 1ce2397306b9..91b3780ddb04 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4310,7 +4310,6 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
 		if (test_bit(__IXGBE_RX_FCOE, &rx_ring->state))
 			set_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state);
 
-		clear_bit(__IXGBE_RX_BUILD_SKB_ENABLED, &rx_ring->state);
 		if (adapter->flags2 & IXGBE_FLAG2_RX_LEGACY)
 			continue;
 
-- 
2.21.0

Re: [net v2 0/7][pull request] Intel Wired LAN Driver Updates 2019-11-01

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri,  1 Nov 2019 13:25:31 -0700

> This series contains updates to e1000, igb, igc, ixgbe, i40e and driver
> documentation.

Pulled, thank Jeff.