[PATCH AUTOSEL 4.19 016/237] mt76: do not store aggregation sequence number for null-data frames

[PATCH AUTOSEL 4.19 016/237] mt76: do not store aggregation sequence number for null-data frames

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 5155938d8a0fe0e0251435cae02539e81fb8e407 ]

Fixes a rare corner case where a BlockAckReq might get the wrong
sequence number.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/tx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/tx.c b/drivers/net/wireless/mediatek/mt76/tx.c
index 20447fdce4c33..227e5ebfe3dc2 100644
--- a/drivers/net/wireless/mediatek/mt76/tx.c
+++ b/drivers/net/wireless/mediatek/mt76/tx.c
@@ -148,7 +148,8 @@ mt76_check_agg_ssn(struct mt76_txq *mtxq, struct sk_buff *skb)
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 
-	if (!ieee80211_is_data_qos(hdr->frame_control))
+	if (!ieee80211_is_data_qos(hdr->frame_control) ||
+	    !ieee80211_is_data_present(hdr->frame_control))
 		return;
 
 	mtxq->agg_ssn = le16_to_cpu(hdr->seq_ctrl) + 0x10;
-- 
2.20.1

[PATCH AUTOSEL 4.19 017/237] mt76x0: phy: fix restore phase in mt76x0_phy_recalibrate_after_assoc

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>

[ Upstream commit 4df942733fd26d9378a4a00619be348c771e0190 ]

Fix restore value configured in MT_BBP(IBI, 9) register in
mt76x0_phy_recalibrate_after_assoc routine.

Fixes: 10de7a8b4ab9 ("mt76x0: phy files")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
index 14e8c575f6c3e..924c761f34fd9 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
@@ -793,9 +793,8 @@ void mt76x0_phy_recalibrate_after_assoc(struct mt76x0_dev *dev)
 	mt76_wr(dev, MT_TX_ALC_CFG_0, 0);
 	usleep_range(500, 700);
 
-	reg_val = mt76_rr(dev, 0x2124);
-	reg_val &= 0xffffff7e;
-	mt76_wr(dev, 0x2124, reg_val);
+	reg_val = mt76_rr(dev, MT_BBP(IBI, 9));
+	mt76_wr(dev, MT_BBP(IBI, 9), 0xffffff7e);
 
 	mt76x0_mcu_calibrate(dev, MCU_CAL_RXDCOC, 0);
 
@@ -806,7 +805,7 @@ void mt76x0_phy_recalibrate_after_assoc(struct mt76x0_dev *dev)
 	mt76x0_mcu_calibrate(dev, MCU_CAL_RXIQ, is_5ghz);
 	mt76x0_mcu_calibrate(dev, MCU_CAL_RX_GROUP_DELAY, is_5ghz);
 
-	mt76_wr(dev, 0x2124, reg_val);
+	mt76_wr(dev, MT_BBP(IBI, 9), reg_val);
 	mt76_wr(dev, MT_TX_ALC_CFG_0, tx_alc);
 	msleep(100);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 018/237] brcmsmac: AP mode: update beacon when TIM changes

[Sasha Levin]

From: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>

[ Upstream commit 2258ee58baa554609a3cc3996276e4276f537b6d ]

Beacons are not updated to reflect TIM changes. This is not compliant with
power-saving client stations as the beacons do not have valid TIM and can
cause the network to stall at random occasions and to have highly variable
latencies.
Fix it by updating beacon templates on mac80211 set_tim callback.

Addresses an issue described in:
https://marc.info/?i=20180911163534.21312d08%20()%20manjaro

Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../broadcom/brcm80211/brcmsmac/mac80211_if.c | 26 +++++++++++++++++++
 .../broadcom/brcm80211/brcmsmac/main.h        |  1 +
 2 files changed, 27 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index ecc89e718b9c1..23118207b661e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -502,6 +502,7 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	}
 
 	spin_lock_bh(&wl->lock);
+	wl->wlc->vif = vif;
 	wl->mute_tx = false;
 	brcms_c_mute(wl->wlc, false);
 	if (vif->type == NL80211_IFTYPE_STATION)
@@ -519,6 +520,11 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 static void
 brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
+	struct brcms_info *wl = hw->priv;
+
+	spin_lock_bh(&wl->lock);
+	wl->wlc->vif = NULL;
+	spin_unlock_bh(&wl->lock);
 }
 
 static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
@@ -937,6 +943,25 @@ static void brcms_ops_set_tsf(struct ieee80211_hw *hw,
 	spin_unlock_bh(&wl->lock);
 }
 
+static int brcms_ops_beacon_set_tim(struct ieee80211_hw *hw,
+				 struct ieee80211_sta *sta, bool set)
+{
+	struct brcms_info *wl = hw->priv;
+	struct sk_buff *beacon = NULL;
+	u16 tim_offset = 0;
+
+	spin_lock_bh(&wl->lock);
+	if (wl->wlc->vif)
+		beacon = ieee80211_beacon_get_tim(hw, wl->wlc->vif,
+						  &tim_offset, NULL);
+	if (beacon)
+		brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
+				       wl->wlc->vif->bss_conf.dtim_period);
+	spin_unlock_bh(&wl->lock);
+
+	return 0;
+}
+
 static const struct ieee80211_ops brcms_ops = {
 	.tx = brcms_ops_tx,
 	.start = brcms_ops_start,
@@ -955,6 +980,7 @@ static const struct ieee80211_ops brcms_ops = {
 	.flush = brcms_ops_flush,
 	.get_tsf = brcms_ops_get_tsf,
 	.set_tsf = brcms_ops_set_tsf,
+	.set_tim = brcms_ops_beacon_set_tim,
 };
 
 void brcms_dpc(unsigned long data)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
index c4d135cff04ad..9f76b880814e8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
@@ -563,6 +563,7 @@ struct brcms_c_info {
 
 	struct wiphy *wiphy;
 	struct scb pri_scb;
+	struct ieee80211_vif *vif;
 
 	struct sk_buff *beacon;
 	u16 beacon_tim_offset;
-- 
2.20.1

[PATCH AUTOSEL 4.19 019/237] ath10k: set probe request oui during driver start

[Sasha Levin]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit f1157695c527d4ee949ac83f743f80107751a70c ]

Currently the wmi command for setting probe request
oui, needed for mac randomization, is sent during
the mac register. At this time, during the driver
init the wmi has already been detached. This can
cause unexpected behavior since the firmware is
already down and the wmi has been detached.

Send the wmi command for setting probe request
oui during the driver start. This will make sure
that the firmware is started and wmi is initialized
before we send this command.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Fixes: 60e1d0fb290197fe505dff6e4e3b7e4d258dbf60
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1419f9d1505fe..97e6911811176 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4685,6 +4685,14 @@ static int ath10k_start(struct ieee80211_hw *hw)
 		goto err_core_stop;
 	}
 
+	if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) {
+		ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr);
+		if (ret) {
+			ath10k_err(ar, "failed to set prob req oui: %i\n", ret);
+			goto err_core_stop;
+		}
+	}
+
 	if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
 		ret = ath10k_wmi_adaptive_qcs(ar, true);
 		if (ret) {
@@ -8549,12 +8557,6 @@ int ath10k_mac_register(struct ath10k *ar)
 	}
 
 	if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) {
-		ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr);
-		if (ret) {
-			ath10k_err(ar, "failed to set prob req oui: %i\n", ret);
-			goto err_dfs_detector_exit;
-		}
-
 		ar->hw->wiphy->features |=
 			NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 020/237] ath10k: allocate small size dma memory in ath10k_pci_diag_write_mem

[Sasha Levin]

From: Carl Huang <cjhuang@codeaurora.org>

[ Upstream commit 0738b4998c6d1caf9ca2447b946709a7278c70f1 ]

ath10k_pci_diag_write_mem may allocate big size of the dma memory
based on the parameter nbytes. Take firmware diag download as
example, the biggest size is about 500K. In some systems, the
allocation is likely to fail because it can't acquire such a large
contiguous dma memory.

The fix is to allocate a small size dma memory. In the loop,
driver copies the data to the allocated dma memory and writes to
the destination until all the data is written.

Tested with QCA6174 PCI with
firmware-6.bin_WLAN.RM.4.4.1-00119-QCARMSWP-1, this also affects
QCA9377 PCI.

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chomium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/pci.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index af2cf55c4c1e6..daf450472aca3 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1054,10 +1054,9 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 	struct ath10k_ce *ce = ath10k_ce_priv(ar);
 	int ret = 0;
 	u32 *buf;
-	unsigned int completed_nbytes, orig_nbytes, remaining_bytes;
+	unsigned int completed_nbytes, alloc_nbytes, remaining_bytes;
 	struct ath10k_ce_pipe *ce_diag;
 	void *data_buf = NULL;
-	u32 ce_data;	/* Host buffer address in CE space */
 	dma_addr_t ce_data_base = 0;
 	int i;
 
@@ -1071,9 +1070,10 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 	 *   1) 4-byte alignment
 	 *   2) Buffer in DMA-able space
 	 */
-	orig_nbytes = nbytes;
+	alloc_nbytes = min_t(unsigned int, nbytes, DIAG_TRANSFER_LIMIT);
+
 	data_buf = (unsigned char *)dma_alloc_coherent(ar->dev,
-						       orig_nbytes,
+						       alloc_nbytes,
 						       &ce_data_base,
 						       GFP_ATOMIC);
 	if (!data_buf) {
@@ -1081,9 +1081,6 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 		goto done;
 	}
 
-	/* Copy caller's data to allocated DMA buf */
-	memcpy(data_buf, data, orig_nbytes);
-
 	/*
 	 * The address supplied by the caller is in the
 	 * Target CPU virtual address space.
@@ -1096,12 +1093,14 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 	 */
 	address = ath10k_pci_targ_cpu_to_ce_addr(ar, address);
 
-	remaining_bytes = orig_nbytes;
-	ce_data = ce_data_base;
+	remaining_bytes = nbytes;
 	while (remaining_bytes) {
 		/* FIXME: check cast */
 		nbytes = min_t(int, remaining_bytes, DIAG_TRANSFER_LIMIT);
 
+		/* Copy caller's data to allocated DMA buf */
+		memcpy(data_buf, data, nbytes);
+
 		/* Set up to receive directly into Target(!) address */
 		ret = ce_diag->ops->ce_rx_post_buf(ce_diag, &address, address);
 		if (ret != 0)
@@ -1111,7 +1110,7 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 		 * Request CE to send caller-supplied data that
 		 * was copied to bounce buffer to Target(!) address.
 		 */
-		ret = ath10k_ce_send_nolock(ce_diag, NULL, (u32)ce_data,
+		ret = ath10k_ce_send_nolock(ce_diag, NULL, ce_data_base,
 					    nbytes, 0, 0);
 		if (ret != 0)
 			goto done;
@@ -1152,12 +1151,12 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 
 		remaining_bytes -= nbytes;
 		address += nbytes;
-		ce_data += nbytes;
+		data += nbytes;
 	}
 
 done:
 	if (data_buf) {
-		dma_free_coherent(ar->dev, orig_nbytes, data_buf,
+		dma_free_coherent(ar->dev, alloc_nbytes, data_buf,
 				  ce_data_base);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 037/237] net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update

[Sasha Levin]

From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>

[ Upstream commit 5da1948969bc1991920987ce4361ea56046e5a98 ]

Whenever kernel or user decides to call rx mode update, it clears
every multicast entry from forwarding table and in some time adds
it again. This time can be enough to drop incoming multicast packets.

That's why clear only staled multicast entries and update or add new
one afterwards.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/cpsw.c | 46 +++++++++++++++++++++-------------
 1 file changed, 28 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 1afed85550c0a..ef79d2b6070b9 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -570,7 +570,7 @@ static inline int cpsw_get_slave_port(u32 slave_num)
 	return slave_num + 1;
 }
 
-static void cpsw_add_mcast(struct cpsw_priv *priv, u8 *addr)
+static void cpsw_add_mcast(struct cpsw_priv *priv, const u8 *addr)
 {
 	struct cpsw_common *cpsw = priv->cpsw;
 
@@ -662,16 +662,35 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
 	}
 }
 
-static void cpsw_ndo_set_rx_mode(struct net_device *ndev)
+static int cpsw_add_mc_addr(struct net_device *ndev, const u8 *addr)
+{
+	struct cpsw_priv *priv = netdev_priv(ndev);
+
+	cpsw_add_mcast(priv, addr);
+	return 0;
+}
+
+static int cpsw_del_mc_addr(struct net_device *ndev, const u8 *addr)
 {
 	struct cpsw_priv *priv = netdev_priv(ndev);
 	struct cpsw_common *cpsw = priv->cpsw;
-	int vid;
+	int vid, flags;
 
-	if (cpsw->data.dual_emac)
+	if (cpsw->data.dual_emac) {
 		vid = cpsw->slaves[priv->emac_port].port_vlan;
-	else
-		vid = cpsw->data.default_vlan;
+		flags = ALE_VLAN;
+	} else {
+		vid = 0;
+		flags = 0;
+	}
+
+	cpsw_ale_del_mcast(cpsw->ale, addr, 0, flags, vid);
+	return 0;
+}
+
+static void cpsw_ndo_set_rx_mode(struct net_device *ndev)
+{
+	struct cpsw_common *cpsw = ndev_to_cpsw(ndev);
 
 	if (ndev->flags & IFF_PROMISC) {
 		/* Enable promiscuous mode */
@@ -684,19 +703,9 @@ static void cpsw_ndo_set_rx_mode(struct net_device *ndev)
 	}
 
 	/* Restore allmulti on vlans if necessary */
-	cpsw_ale_set_allmulti(cpsw->ale, priv->ndev->flags & IFF_ALLMULTI);
-
-	/* Clear all mcast from ALE */
-	cpsw_ale_flush_multicast(cpsw->ale, ALE_ALL_PORTS, vid);
+	cpsw_ale_set_allmulti(cpsw->ale, ndev->flags & IFF_ALLMULTI);
 
-	if (!netdev_mc_empty(ndev)) {
-		struct netdev_hw_addr *ha;
-
-		/* program multicast address list into ALE register */
-		netdev_for_each_mc_addr(ha, ndev) {
-			cpsw_add_mcast(priv, ha->addr);
-		}
-	}
+	__dev_mc_sync(ndev, cpsw_add_mc_addr, cpsw_del_mc_addr);
 }
 
 static void cpsw_intr_enable(struct cpsw_common *cpsw)
@@ -1956,6 +1965,7 @@ static int cpsw_ndo_stop(struct net_device *ndev)
 	struct cpsw_common *cpsw = priv->cpsw;
 
 	cpsw_info(priv, ifdown, "shutting down cpsw device\n");
+	__dev_mc_unsync(priv->ndev, cpsw_del_mc_addr);
 	netif_tx_stop_all_queues(priv->ndev);
 	netif_carrier_off(priv->ndev);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 044/237] qed: Align local and global PTT to propagate through the APIs.

[Sasha Levin]

From: Rahul Verma <Rahul.Verma@cavium.com>

[ Upstream commit 706d08913d1f68610c32b4a001026aa989878dd9 ]

    Align the use of local PTT to propagate through the qed_mcp* API's.
    Global ptt should not be used.

    Register access should be done through layers. Register address is
    mapped into a PTT, PF translation table. Several interface functions
    require a PTT to direct read/write into register. There is a pool of
    PTT maintained, and several PTT are used simultaneously to access
    device registers in different flows. Same PTT should not be used in
    flows that can run concurrently.
    To avoid running out of PTT resources, too many PTT should not be
    acquired without releasing them. Every PF has a global PTT, which is
    used throughout the life of PF, in most important flows for register
    access. Generic functions acquire the PTT locally and release after
    the use. This patch aligns the use of Global PTT and Local PTT
    accordingly.

Signed-off-by: Rahul Verma <rahul.verma@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed.h      |  2 +-
 drivers/net/ethernet/qlogic/qed/qed_main.c | 22 ++++++++++++++----
 drivers/net/ethernet/qlogic/qed/qed_mcp.c  | 27 ++++++++++------------
 drivers/net/ethernet/qlogic/qed/qed_mcp.h  |  5 ++--
 drivers/net/ethernet/qlogic/qed/qed_vf.c   |  2 +-
 5 files changed, 35 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h
index a60e1c8d470a0..32e786a3952b1 100644
--- a/drivers/net/ethernet/qlogic/qed/qed.h
+++ b/drivers/net/ethernet/qlogic/qed/qed.h
@@ -914,7 +914,7 @@ u16 qed_get_cm_pq_idx_llt_mtc(struct qed_hwfn *p_hwfn, u8 tc);
 /* Prototypes */
 int qed_fill_dev_info(struct qed_dev *cdev,
 		      struct qed_dev_info *dev_info);
-void qed_link_update(struct qed_hwfn *hwfn);
+void qed_link_update(struct qed_hwfn *hwfn, struct qed_ptt *ptt);
 u32 qed_unzip_data(struct qed_hwfn *p_hwfn,
 		   u32 input_len, u8 *input_buf,
 		   u32 max_size, u8 *unzip_buf);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 637687b766ff0..049a83b40e469 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1462,6 +1462,7 @@ static int qed_get_link_data(struct qed_hwfn *hwfn,
 }
 
 static void qed_fill_link(struct qed_hwfn *hwfn,
+			  struct qed_ptt *ptt,
 			  struct qed_link_output *if_link)
 {
 	struct qed_mcp_link_params params;
@@ -1542,7 +1543,7 @@ static void qed_fill_link(struct qed_hwfn *hwfn,
 
 	/* TODO - fill duplex properly */
 	if_link->duplex = DUPLEX_FULL;
-	qed_mcp_get_media_type(hwfn->cdev, &media_type);
+	qed_mcp_get_media_type(hwfn, ptt, &media_type);
 	if_link->port = qed_get_port_type(media_type);
 
 	if_link->autoneg = params.speed.autoneg;
@@ -1598,21 +1599,34 @@ static void qed_fill_link(struct qed_hwfn *hwfn,
 static void qed_get_current_link(struct qed_dev *cdev,
 				 struct qed_link_output *if_link)
 {
+	struct qed_hwfn *hwfn;
+	struct qed_ptt *ptt;
 	int i;
 
-	qed_fill_link(&cdev->hwfns[0], if_link);
+	hwfn = &cdev->hwfns[0];
+	if (IS_PF(cdev)) {
+		ptt = qed_ptt_acquire(hwfn);
+		if (ptt) {
+			qed_fill_link(hwfn, ptt, if_link);
+			qed_ptt_release(hwfn, ptt);
+		} else {
+			DP_NOTICE(hwfn, "Failed to fill link; No PTT\n");
+		}
+	} else {
+		qed_fill_link(hwfn, NULL, if_link);
+	}
 
 	for_each_hwfn(cdev, i)
 		qed_inform_vf_link_state(&cdev->hwfns[i]);
 }
 
-void qed_link_update(struct qed_hwfn *hwfn)
+void qed_link_update(struct qed_hwfn *hwfn, struct qed_ptt *ptt)
 {
 	void *cookie = hwfn->cdev->ops_cookie;
 	struct qed_common_cb_ops *op = hwfn->cdev->protocol_ops.common;
 	struct qed_link_output if_link;
 
-	qed_fill_link(hwfn, &if_link);
+	qed_fill_link(hwfn, ptt, &if_link);
 	qed_inform_vf_link_state(hwfn);
 
 	if (IS_LEAD_HWFN(hwfn) && cookie)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
index 58c7eb9d8e1b8..938ace333af10 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
@@ -1382,7 +1382,7 @@ static void qed_mcp_handle_link_change(struct qed_hwfn *p_hwfn,
 	if (p_hwfn->mcp_info->capabilities & FW_MB_PARAM_FEATURE_SUPPORT_EEE)
 		qed_mcp_read_eee_config(p_hwfn, p_ptt, p_link);
 
-	qed_link_update(p_hwfn);
+	qed_link_update(p_hwfn, p_ptt);
 out:
 	spin_unlock_bh(&p_hwfn->mcp_info->link_lock);
 }
@@ -1849,12 +1849,10 @@ int qed_mcp_get_mbi_ver(struct qed_hwfn *p_hwfn,
 	return 0;
 }
 
-int qed_mcp_get_media_type(struct qed_dev *cdev, u32 *p_media_type)
+int qed_mcp_get_media_type(struct qed_hwfn *p_hwfn,
+			   struct qed_ptt *p_ptt, u32 *p_media_type)
 {
-	struct qed_hwfn *p_hwfn = &cdev->hwfns[0];
-	struct qed_ptt  *p_ptt;
-
-	if (IS_VF(cdev))
+	if (IS_VF(p_hwfn->cdev))
 		return -EINVAL;
 
 	if (!qed_mcp_is_init(p_hwfn)) {
@@ -1862,16 +1860,15 @@ int qed_mcp_get_media_type(struct qed_dev *cdev, u32 *p_media_type)
 		return -EBUSY;
 	}
 
-	*p_media_type = MEDIA_UNSPECIFIED;
-
-	p_ptt = qed_ptt_acquire(p_hwfn);
-	if (!p_ptt)
-		return -EBUSY;
-
-	*p_media_type = qed_rd(p_hwfn, p_ptt, p_hwfn->mcp_info->port_addr +
-			       offsetof(struct public_port, media_type));
+	if (!p_ptt) {
+		*p_media_type = MEDIA_UNSPECIFIED;
+		return -EINVAL;
+	}
 
-	qed_ptt_release(p_hwfn, p_ptt);
+	*p_media_type = qed_rd(p_hwfn, p_ptt,
+			       p_hwfn->mcp_info->port_addr +
+			       offsetof(struct public_port,
+					media_type));
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.h b/drivers/net/ethernet/qlogic/qed/qed_mcp.h
index 85e6b3989e7a9..80a6b5d1ff338 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.h
@@ -322,14 +322,15 @@ int qed_mcp_get_mbi_ver(struct qed_hwfn *p_hwfn,
  * @brief Get media type value of the port.
  *
  * @param cdev      - qed dev pointer
+ * @param p_ptt
  * @param mfw_ver    - media type value
  *
  * @return int -
  *      0 - Operation was successul.
  *      -EBUSY - Operation failed
  */
-int qed_mcp_get_media_type(struct qed_dev      *cdev,
-			   u32                  *media_type);
+int qed_mcp_get_media_type(struct qed_hwfn *p_hwfn,
+			   struct qed_ptt *p_ptt, u32 *media_type);
 
 /**
  * @brief General function for sending commands to the MCP
diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c
index 6ab3fb008139d..5dda547772c13 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_vf.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c
@@ -1698,7 +1698,7 @@ static void qed_handle_bulletin_change(struct qed_hwfn *hwfn)
 	ops->ports_update(cookie, vxlan_port, geneve_port);
 
 	/* Always update link configuration according to bulletin */
-	qed_link_update(hwfn);
+	qed_link_update(hwfn, NULL);
 }
 
 void qed_iov_vf_task(struct work_struct *work)
-- 
2.20.1

[PATCH AUTOSEL 4.19 046/237] nfp: bpf: protect against mis-initializing atomic counters

[Sasha Levin]

From: Jakub Kicinski <jakub.kicinski@netronome.com>

[ Upstream commit 527db74b71ee5a279f818aae51f2c26b4e5c7648 ]

Atomic operations on the NFP are currently always in big endian.
The driver keeps track of regions of memory storing atomic values
and byte swaps them accordingly.  There are corner cases where
the map values may be initialized before the driver knows they
are used as atomic counters.  This can happen either when the
datapath is performing the update and the stack contents are
unknown or when map is updated before the program which will
use it for atomic values is loaded.

To avoid situation where user initializes the value to 0 1 2 3
and then after loading a program which uses the word as an atomic
counter starts reading 3 2 1 0 - only allow atomic counters to be
initialized to endian-neutral values.

For updates from the datapath the stack information may not be
as precise, so just allow initializing such values to 0.

Example code which would break:
struct bpf_map_def SEC("maps") rxcnt = {
       .type = BPF_MAP_TYPE_HASH,
       .key_size = sizeof(__u32),
       .value_size = sizeof(__u64),
       .max_entries = 1,
};

int xdp_prog1()
{
      	__u64 nonzeroval = 3;
	__u32 key = 0;
	__u64 *value;

	value = bpf_map_lookup_elem(&rxcnt, &key);
	if (!value)
		bpf_map_update_elem(&rxcnt, &key, &nonzeroval, BPF_ANY);
	else
		__sync_fetch_and_add(value, 1);

	return XDP_PASS;
}

$ offload bpftool map dump
key: 00 00 00 00 value: 00 00 00 03 00 00 00 00

should be:

$ offload bpftool map dump
key: 00 00 00 00 value: 03 00 00 00 00 00 00 00

Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/netronome/nfp/bpf/main.h |  7 ++-
 .../net/ethernet/netronome/nfp/bpf/offload.c  | 18 +++++-
 .../net/ethernet/netronome/nfp/bpf/verifier.c | 58 +++++++++++++++++--
 3 files changed, 76 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.h b/drivers/net/ethernet/netronome/nfp/bpf/main.h
index dbd00982fd2b6..2134045e14c36 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/main.h
+++ b/drivers/net/ethernet/netronome/nfp/bpf/main.h
@@ -206,6 +206,11 @@ enum nfp_bpf_map_use {
 	NFP_MAP_USE_ATOMIC_CNT,
 };
 
+struct nfp_bpf_map_word {
+	unsigned char type		:4;
+	unsigned char non_zero_update	:1;
+};
+
 /**
  * struct nfp_bpf_map - private per-map data attached to BPF maps for offload
  * @offmap:	pointer to the offloaded BPF map
@@ -219,7 +224,7 @@ struct nfp_bpf_map {
 	struct nfp_app_bpf *bpf;
 	u32 tid;
 	struct list_head l;
-	enum nfp_bpf_map_use use_map[];
+	struct nfp_bpf_map_word use_map[];
 };
 
 struct nfp_bpf_neutral_map {
diff --git a/drivers/net/ethernet/netronome/nfp/bpf/offload.c b/drivers/net/ethernet/netronome/nfp/bpf/offload.c
index 1ccd6371a15b5..6140e4650b71c 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/offload.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/offload.c
@@ -299,10 +299,25 @@ static void nfp_map_bpf_byte_swap(struct nfp_bpf_map *nfp_map, void *value)
 	unsigned int i;
 
 	for (i = 0; i < DIV_ROUND_UP(nfp_map->offmap->map.value_size, 4); i++)
-		if (nfp_map->use_map[i] == NFP_MAP_USE_ATOMIC_CNT)
+		if (nfp_map->use_map[i].type == NFP_MAP_USE_ATOMIC_CNT)
 			word[i] = (__force u32)cpu_to_be32(word[i]);
 }
 
+/* Mark value as unsafely initialized in case it becomes atomic later
+ * and we didn't byte swap something non-byte swap neutral.
+ */
+static void
+nfp_map_bpf_byte_swap_record(struct nfp_bpf_map *nfp_map, void *value)
+{
+	u32 *word = value;
+	unsigned int i;
+
+	for (i = 0; i < DIV_ROUND_UP(nfp_map->offmap->map.value_size, 4); i++)
+		if (nfp_map->use_map[i].type == NFP_MAP_UNUSED &&
+		    word[i] != (__force u32)cpu_to_be32(word[i]))
+			nfp_map->use_map[i].non_zero_update = 1;
+}
+
 static int
 nfp_bpf_map_lookup_entry(struct bpf_offloaded_map *offmap,
 			 void *key, void *value)
@@ -322,6 +337,7 @@ nfp_bpf_map_update_entry(struct bpf_offloaded_map *offmap,
 			 void *key, void *value, u64 flags)
 {
 	nfp_map_bpf_byte_swap(offmap->dev_priv, value);
+	nfp_map_bpf_byte_swap_record(offmap->dev_priv, value);
 	return nfp_bpf_ctrl_update_entry(offmap, key, value, flags);
 }
 
diff --git a/drivers/net/ethernet/netronome/nfp/bpf/verifier.c b/drivers/net/ethernet/netronome/nfp/bpf/verifier.c
index a6e9248669e14..db7e186dae56d 100644
--- a/drivers/net/ethernet/netronome/nfp/bpf/verifier.c
+++ b/drivers/net/ethernet/netronome/nfp/bpf/verifier.c
@@ -108,6 +108,46 @@ nfp_record_adjust_head(struct nfp_app_bpf *bpf, struct nfp_prog *nfp_prog,
 	nfp_prog->adjust_head_location = location;
 }
 
+static bool nfp_bpf_map_update_value_ok(struct bpf_verifier_env *env)
+{
+	const struct bpf_reg_state *reg1 = cur_regs(env) + BPF_REG_1;
+	const struct bpf_reg_state *reg3 = cur_regs(env) + BPF_REG_3;
+	struct bpf_offloaded_map *offmap;
+	struct bpf_func_state *state;
+	struct nfp_bpf_map *nfp_map;
+	int off, i;
+
+	state = env->cur_state->frame[reg3->frameno];
+
+	/* We need to record each time update happens with non-zero words,
+	 * in case such word is used in atomic operations.
+	 * Implicitly depend on nfp_bpf_stack_arg_ok(reg3) being run before.
+	 */
+
+	offmap = map_to_offmap(reg1->map_ptr);
+	nfp_map = offmap->dev_priv;
+	off = reg3->off + reg3->var_off.value;
+
+	for (i = 0; i < offmap->map.value_size; i++) {
+		struct bpf_stack_state *stack_entry;
+		unsigned int soff;
+
+		soff = -(off + i) - 1;
+		stack_entry = &state->stack[soff / BPF_REG_SIZE];
+		if (stack_entry->slot_type[soff % BPF_REG_SIZE] == STACK_ZERO)
+			continue;
+
+		if (nfp_map->use_map[i / 4].type == NFP_MAP_USE_ATOMIC_CNT) {
+			pr_vlog(env, "value at offset %d/%d may be non-zero, bpf_map_update_elem() is required to initialize atomic counters to zero to avoid offload endian issues\n",
+				i, soff);
+			return false;
+		}
+		nfp_map->use_map[i / 4].non_zero_update = 1;
+	}
+
+	return true;
+}
+
 static int
 nfp_bpf_stack_arg_ok(const char *fname, struct bpf_verifier_env *env,
 		     const struct bpf_reg_state *reg,
@@ -198,7 +238,8 @@ nfp_bpf_check_call(struct nfp_prog *nfp_prog, struct bpf_verifier_env *env,
 					 bpf->helpers.map_update, reg1) ||
 		    !nfp_bpf_stack_arg_ok("map_update", env, reg2,
 					  meta->func_id ? &meta->arg2 : NULL) ||
-		    !nfp_bpf_stack_arg_ok("map_update", env, reg3, NULL))
+		    !nfp_bpf_stack_arg_ok("map_update", env, reg3, NULL) ||
+		    !nfp_bpf_map_update_value_ok(env))
 			return -EOPNOTSUPP;
 		break;
 
@@ -376,15 +417,22 @@ nfp_bpf_map_mark_used_one(struct bpf_verifier_env *env,
 			  struct nfp_bpf_map *nfp_map,
 			  unsigned int off, enum nfp_bpf_map_use use)
 {
-	if (nfp_map->use_map[off / 4] != NFP_MAP_UNUSED &&
-	    nfp_map->use_map[off / 4] != use) {
+	if (nfp_map->use_map[off / 4].type != NFP_MAP_UNUSED &&
+	    nfp_map->use_map[off / 4].type != use) {
 		pr_vlog(env, "map value use type conflict %s vs %s off: %u\n",
-			nfp_bpf_map_use_name(nfp_map->use_map[off / 4]),
+			nfp_bpf_map_use_name(nfp_map->use_map[off / 4].type),
 			nfp_bpf_map_use_name(use), off);
 		return -EOPNOTSUPP;
 	}
 
-	nfp_map->use_map[off / 4] = use;
+	if (nfp_map->use_map[off / 4].non_zero_update &&
+	    use == NFP_MAP_USE_ATOMIC_CNT) {
+		pr_vlog(env, "atomic counter in map value may already be initialized to non-zero value off: %u\n",
+			off);
+		return -EOPNOTSUPP;
+	}
+
+	nfp_map->use_map[off / 4].type = use;
 
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 066/237] net: dsa: mv88e6xxx: Fix 88E6141/6341 2500mbps SERDES speed

[Sasha Levin]

From: Marek Behún <marek.behun@nic.cz>

[ Upstream commit 26422340da467538cd65eaa9c65538039ee99c8c ]

This is a fix for the port_set_speed method for the Topaz family.
Currently the same method is used as for the Peridot family, but
this is wrong for the SERDES port.

On Topaz, the SERDES port is port 5, not 9 and 10 as in Peridot.
Moreover setting alt_bit on Topaz only makes sense for port 0 (for
(differentiating 100mbps vs 200mbps). The SERDES port does not
support more than 2500mbps, so alt_bit does not make any difference.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |  4 ++--
 drivers/net/dsa/mv88e6xxx/port.c | 25 +++++++++++++++++++++++--
 drivers/net/dsa/mv88e6xxx/port.h |  1 +
 3 files changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index d075f0f7a3de8..411ae9961bf4f 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3028,7 +3028,7 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
-	.port_set_speed = mv88e6390_port_set_speed,
+	.port_set_speed = mv88e6341_port_set_speed,
 	.port_tag_remap = mv88e6095_port_tag_remap,
 	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
 	.port_set_egress_floods = mv88e6352_port_set_egress_floods,
@@ -3649,7 +3649,7 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_set_duplex = mv88e6xxx_port_set_duplex,
 	.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
-	.port_set_speed = mv88e6390_port_set_speed,
+	.port_set_speed = mv88e6341_port_set_speed,
 	.port_tag_remap = mv88e6095_port_tag_remap,
 	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
 	.port_set_egress_floods = mv88e6352_port_set_egress_floods,
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index fdeddbfa829da..2f16a310c110e 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -228,8 +228,11 @@ static int mv88e6xxx_port_set_speed(struct mv88e6xxx_chip *chip, int port,
 		ctrl = MV88E6XXX_PORT_MAC_CTL_SPEED_1000;
 		break;
 	case 2500:
-		ctrl = MV88E6390_PORT_MAC_CTL_SPEED_10000 |
-			MV88E6390_PORT_MAC_CTL_ALTSPEED;
+		if (alt_bit)
+			ctrl = MV88E6390_PORT_MAC_CTL_SPEED_10000 |
+				MV88E6390_PORT_MAC_CTL_ALTSPEED;
+		else
+			ctrl = MV88E6390_PORT_MAC_CTL_SPEED_10000;
 		break;
 	case 10000:
 		/* all bits set, fall through... */
@@ -291,6 +294,24 @@ int mv88e6185_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
 	return mv88e6xxx_port_set_speed(chip, port, speed, false, false);
 }
 
+/* Support 10, 100, 200, 1000, 2500 Mbps (e.g. 88E6341) */
+int mv88e6341_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
+{
+	if (speed == SPEED_MAX)
+		speed = port < 5 ? 1000 : 2500;
+
+	if (speed > 2500)
+		return -EOPNOTSUPP;
+
+	if (speed == 200 && port != 0)
+		return -EOPNOTSUPP;
+
+	if (speed == 2500 && port < 5)
+		return -EOPNOTSUPP;
+
+	return mv88e6xxx_port_set_speed(chip, port, speed, !port, true);
+}
+
 /* Support 10, 100, 200, 1000 Mbps (e.g. 88E6352 family) */
 int mv88e6352_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed)
 {
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 95b59f5eb3931..cbb64a7683e28 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -280,6 +280,7 @@ int mv88e6xxx_port_set_duplex(struct mv88e6xxx_chip *chip, int port, int dup);
 
 int mv88e6065_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
 int mv88e6185_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
+int mv88e6341_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
 int mv88e6352_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
 int mv88e6390_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
 int mv88e6390x_port_set_speed(struct mv88e6xxx_chip *chip, int port, int speed);
-- 
2.20.1

[PATCH AUTOSEL 4.19 067/237] net: fix warning in af_unix

[Sasha Levin]

From: Kyeongdon Kim <kyeongdon.kim@lge.com>

[ Upstream commit 33c4368ee2589c165aebd8d388cbd91e9adb9688 ]

This fixes the "'hash' may be used uninitialized in this function"

net/unix/af_unix.c:1041:20: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized]
  addr->hash = hash ^ sk->sk_type;

Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/unix/af_unix.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 231b6c032d2c3..d2d6ff0c6265d 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -225,6 +225,8 @@ static inline void unix_release_addr(struct unix_address *addr)
 
 static int unix_mkname(struct sockaddr_un *sunaddr, int len, unsigned int *hashp)
 {
+	*hashp = 0;
+
 	if (len <= sizeof(short) || len > sizeof(*sunaddr))
 		return -EINVAL;
 	if (!sunaddr || sunaddr->sun_family != AF_UNIX)
-- 
2.20.1

[PATCH AUTOSEL 4.19 068/237] net: ena: Fix Kconfig dependency on X86

[Sasha Levin]

From: Netanel Belgazal <netanel@amazon.com>

[ Upstream commit 8c590f9776386b8f697fd0b7ed6142ae6e3de79e ]

The Kconfig limitation of X86 is to too wide.
The ENA driver only requires a little endian dependency.

Change the dependency to be on little endian CPU.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amazon/Kconfig b/drivers/net/ethernet/amazon/Kconfig
index 99b30353541ab..9e87d7b8360f5 100644
--- a/drivers/net/ethernet/amazon/Kconfig
+++ b/drivers/net/ethernet/amazon/Kconfig
@@ -17,7 +17,7 @@ if NET_VENDOR_AMAZON
 
 config ENA_ETHERNET
 	tristate "Elastic Network Adapter (ENA) support"
-	depends on (PCI_MSI && X86)
+	depends on PCI_MSI && !CPU_BIG_ENDIAN
 	---help---
 	  This driver supports Elastic Network Adapter (ENA)"
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 079/237] sctp: use sk_wmem_queued to check for writable space

[Sasha Levin]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit cd305c74b0f8b49748a79a8f67fc8e5e3e0c4794 ]

sk->sk_wmem_queued is used to count the size of chunks in out queue
while sk->sk_wmem_alloc is for counting the size of chunks has been
sent. sctp is increasing both of them before enqueuing the chunks,
and using sk->sk_wmem_alloc to check for writable space.

However, sk_wmem_alloc is also increased by 1 for the skb allocked
for sending in sctp_packet_transmit() but it will not wake up the
waiters when sk_wmem_alloc is decreased in this skb's destructor.

If msg size is equal to sk_sndbuf and sendmsg is waiting for sndbuf,
the check 'msg_len <= sctp_wspace(asoc)' in sctp_wait_for_sndbuf()
will keep waiting if there's a skb allocked in sctp_packet_transmit,
and later even if this skb got freed, the waiting thread will never
get waked up.

This issue has been there since very beginning, so we change to use
sk->sk_wmem_queued to check for writable space as sk_wmem_queued is
not increased for the skb allocked for sending, also as TCP does.

SOCK_SNDBUF_LOCK check is also removed here as it's for tx buf auto
tuning which I will add in another patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/socket.c | 38 +++++++++-----------------------------
 1 file changed, 9 insertions(+), 29 deletions(-)

diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index c766315527226..e7a11cd7633f5 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -83,7 +83,7 @@
 #include <net/sctp/stream_sched.h>
 
 /* Forward declarations for internal helper functions. */
-static int sctp_writeable(struct sock *sk);
+static bool sctp_writeable(struct sock *sk);
 static void sctp_wfree(struct sk_buff *skb);
 static int sctp_wait_for_sndbuf(struct sctp_association *asoc, long *timeo_p,
 				size_t msg_len);
@@ -119,25 +119,10 @@ static void sctp_enter_memory_pressure(struct sock *sk)
 /* Get the sndbuf space available at the time on the association.  */
 static inline int sctp_wspace(struct sctp_association *asoc)
 {
-	int amt;
+	struct sock *sk = asoc->base.sk;
 
-	if (asoc->ep->sndbuf_policy)
-		amt = asoc->sndbuf_used;
-	else
-		amt = sk_wmem_alloc_get(asoc->base.sk);
-
-	if (amt >= asoc->base.sk->sk_sndbuf) {
-		if (asoc->base.sk->sk_userlocks & SOCK_SNDBUF_LOCK)
-			amt = 0;
-		else {
-			amt = sk_stream_wspace(asoc->base.sk);
-			if (amt < 0)
-				amt = 0;
-		}
-	} else {
-		amt = asoc->base.sk->sk_sndbuf - amt;
-	}
-	return amt;
+	return asoc->ep->sndbuf_policy ? sk->sk_sndbuf - asoc->sndbuf_used
+				       : sk_stream_wspace(sk);
 }
 
 /* Increment the used sndbuf space count of the corresponding association by
@@ -1928,10 +1913,10 @@ static int sctp_sendmsg_to_asoc(struct sctp_association *asoc,
 		asoc->pmtu_pending = 0;
 	}
 
-	if (sctp_wspace(asoc) < msg_len)
+	if (sctp_wspace(asoc) < (int)msg_len)
 		sctp_prsctp_prune(asoc, sinfo, msg_len - sctp_wspace(asoc));
 
-	if (!sctp_wspace(asoc)) {
+	if (sctp_wspace(asoc) <= 0) {
 		timeo = sock_sndtimeo(sk, msg->msg_flags & MSG_DONTWAIT);
 		err = sctp_wait_for_sndbuf(asoc, &timeo, msg_len);
 		if (err)
@@ -8516,7 +8501,7 @@ static int sctp_wait_for_sndbuf(struct sctp_association *asoc, long *timeo_p,
 			goto do_error;
 		if (signal_pending(current))
 			goto do_interrupted;
-		if (msg_len <= sctp_wspace(asoc))
+		if ((int)msg_len <= sctp_wspace(asoc))
 			break;
 
 		/* Let another process have a go.  Since we are going
@@ -8591,14 +8576,9 @@ void sctp_write_space(struct sock *sk)
  * UDP-style sockets or TCP-style sockets, this code should work.
  *  - Daisy
  */
-static int sctp_writeable(struct sock *sk)
+static bool sctp_writeable(struct sock *sk)
 {
-	int amt = 0;
-
-	amt = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
-	if (amt < 0)
-		amt = 0;
-	return amt;
+	return sk->sk_sndbuf > sk->sk_wmem_queued;
 }
 
 /* Wait for an association to go into ESTABLISHED state. If timeout is 0,
-- 
2.20.1

[PATCH AUTOSEL 4.19 081/237] selftests/bpf: fix file resource leak in load_kallsyms

[Sasha Levin]

From: Peng Hao <peng.hao2@zte.com.cn>

[ Upstream commit 1bd70d2eba9d90eb787634361f0f6fa2c86b3f6d ]

FILE pointer variable f is opened but never closed.

Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/trace_helpers.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/bpf/trace_helpers.c b/tools/testing/selftests/bpf/trace_helpers.c
index cf156b3536798..82922f13dcd3a 100644
--- a/tools/testing/selftests/bpf/trace_helpers.c
+++ b/tools/testing/selftests/bpf/trace_helpers.c
@@ -41,6 +41,7 @@ int load_kallsyms(void)
 		syms[i].name = strdup(func);
 		i++;
 	}
+	fclose(f);
 	sym_cnt = i;
 	qsort(syms, sym_cnt, sizeof(struct ksym), ksym_cmp);
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 082/237] SUNRPC: Fix a compile warning for cmpxchg64()

[Sasha Levin]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit e732f4485a150492b286f3efc06f9b34dd6b9995 ]

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/gss_krb5_seal.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/sunrpc/auth_gss/gss_krb5_seal.c b/net/sunrpc/auth_gss/gss_krb5_seal.c
index eaad9bc7a0bdc..e1f0571843c8c 100644
--- a/net/sunrpc/auth_gss/gss_krb5_seal.c
+++ b/net/sunrpc/auth_gss/gss_krb5_seal.c
@@ -63,6 +63,7 @@
 #include <linux/sunrpc/gss_krb5.h>
 #include <linux/random.h>
 #include <linux/crypto.h>
+#include <linux/atomic.h>
 
 #if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
 # define RPCDBG_FACILITY        RPCDBG_AUTH
-- 
2.20.1

[PATCH AUTOSEL 4.19 083/237] sunrpc: safely reallow resvport min/max inversion

[Sasha Levin]

From: "J. Bruce Fields" <bfields@redhat.com>

[ Upstream commit 826799e66e8683e5698e140bb9ef69afc8c0014e ]

Commits ffb6ca33b04b and e08ea3a96fc7 prevent setting xprt_min_resvport
greater than xprt_max_resvport, but may also break simple code that sets
one parameter then the other, if the new range does not overlap the old.

Also it looks racy to me, unless there's some serialization I'm not
seeing.  Granted it would probably require malicious privileged processes
(unless there's a chance these might eventually be settable in unprivileged
containers), but still it seems better not to let userspace panic the
kernel.

Simpler seems to be to allow setting the parameters to whatever you want
but interpret xprt_min_resvport > xprt_max_resvport as the empty range.

Fixes: ffb6ca33b04b "sunrpc: Prevent resvport min/max inversion..."
Fixes: e08ea3a96fc7 "sunrpc: Prevent rexvport min/max inversion..."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtsock.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 7d8cce1dfcad3..adecfd40953f6 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -129,7 +129,7 @@ static struct ctl_table xs_tunables_table[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xprt_min_resvport_limit,
-		.extra2		= &xprt_max_resvport
+		.extra2		= &xprt_max_resvport_limit
 	},
 	{
 		.procname	= "max_resvport",
@@ -137,7 +137,7 @@ static struct ctl_table xs_tunables_table[] = {
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &xprt_min_resvport,
+		.extra1		= &xprt_min_resvport_limit,
 		.extra2		= &xprt_max_resvport_limit
 	},
 	{
@@ -1773,11 +1773,17 @@ static void xs_udp_timer(struct rpc_xprt *xprt, struct rpc_task *task)
 	spin_unlock_bh(&xprt->transport_lock);
 }
 
-static unsigned short xs_get_random_port(void)
+static int xs_get_random_port(void)
 {
-	unsigned short range = xprt_max_resvport - xprt_min_resvport + 1;
-	unsigned short rand = (unsigned short) prandom_u32() % range;
-	return rand + xprt_min_resvport;
+	unsigned short min = xprt_min_resvport, max = xprt_max_resvport;
+	unsigned short range;
+	unsigned short rand;
+
+	if (max < min)
+		return -EADDRINUSE;
+	range = max - min + 1;
+	rand = (unsigned short) prandom_u32() % range;
+	return rand + min;
 }
 
 /**
@@ -1833,9 +1839,9 @@ static void xs_set_srcport(struct sock_xprt *transport, struct socket *sock)
 		transport->srcport = xs_sock_getport(sock);
 }
 
-static unsigned short xs_get_srcport(struct sock_xprt *transport)
+static int xs_get_srcport(struct sock_xprt *transport)
 {
-	unsigned short port = transport->srcport;
+	int port = transport->srcport;
 
 	if (port == 0 && transport->xprt.resvport)
 		port = xs_get_random_port();
@@ -1856,7 +1862,7 @@ static int xs_bind(struct sock_xprt *transport, struct socket *sock)
 {
 	struct sockaddr_storage myaddr;
 	int err, nloop = 0;
-	unsigned short port = xs_get_srcport(transport);
+	int port = xs_get_srcport(transport);
 	unsigned short last;
 
 	/*
@@ -1874,8 +1880,8 @@ static int xs_bind(struct sock_xprt *transport, struct socket *sock)
 	 * transport->xprt.resvport == 1) xs_get_srcport above will
 	 * ensure that port is non-zero and we will bind as needed.
 	 */
-	if (port == 0)
-		return 0;
+	if (port <= 0)
+		return port;
 
 	memcpy(&myaddr, &transport->srcaddr, transport->xprt.addrlen);
 	do {
@@ -3317,12 +3323,8 @@ static int param_set_uint_minmax(const char *val,
 
 static int param_set_portnr(const char *val, const struct kernel_param *kp)
 {
-	if (kp->arg == &xprt_min_resvport)
-		return param_set_uint_minmax(val, kp,
-			RPC_MIN_RESVPORT,
-			xprt_max_resvport);
 	return param_set_uint_minmax(val, kp,
-			xprt_min_resvport,
+			RPC_MIN_RESVPORT,
 			RPC_MAX_RESVPORT);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 084/237] atm: zatm: Fix empty body Clang warnings

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 64b9d16e2d02ca6e5dc8fcd30cfd52b0ecaaa8f4 ]

Clang warns:

drivers/atm/zatm.c:513:7: error: while loop has empty body
[-Werror,-Wempty-body]
        zwait;
             ^
drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to
silence this warning

Get rid of this warning by using an empty do-while loop. While we're at
it, add parentheses to make it clear that this is a function-like macro.

Link: https://github.com/ClangBuiltLinux/linux/issues/42
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/zatm.c | 42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index e89146ddede69..d5c76b50d3575 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -126,7 +126,7 @@ static unsigned long dummy[2] = {0,0};
 #define zin_n(r) inl(zatm_dev->base+r*4)
 #define zin(r) inl(zatm_dev->base+uPD98401_##r*4)
 #define zout(v,r) outl(v,zatm_dev->base+uPD98401_##r*4)
-#define zwait while (zin(CMR) & uPD98401_BUSY)
+#define zwait() do {} while (zin(CMR) & uPD98401_BUSY)
 
 /* RX0, RX1, TX0, TX1 */
 static const int mbx_entries[NR_MBX] = { 1024,1024,1024,1024 };
@@ -140,7 +140,7 @@ static const int mbx_esize[NR_MBX] = { 16,16,4,4 }; /* entry size in bytes */
 
 static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
 {
-	zwait;
+	zwait();
 	zout(value,CER);
 	zout(uPD98401_IND_ACC | uPD98401_IA_BALL |
 	    (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
@@ -149,10 +149,10 @@ static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
 
 static u32 zpeekl(struct zatm_dev *zatm_dev,u32 addr)
 {
-	zwait;
+	zwait();
 	zout(uPD98401_IND_ACC | uPD98401_IA_BALL | uPD98401_IA_RW |
 	  (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
-	zwait;
+	zwait();
 	return zin(CER);
 }
 
@@ -241,7 +241,7 @@ static void refill_pool(struct atm_dev *dev,int pool)
 	}
 	if (first) {
 		spin_lock_irqsave(&zatm_dev->lock, flags);
-		zwait;
+		zwait();
 		zout(virt_to_bus(first),CER);
 		zout(uPD98401_ADD_BAT | (pool << uPD98401_POOL_SHIFT) | count,
 		    CMR);
@@ -508,9 +508,9 @@ static int open_rx_first(struct atm_vcc *vcc)
 	}
 	if (zatm_vcc->pool < 0) return -EMSGSIZE;
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_OPEN_CHAN,CMR);
-	zwait;
+	zwait();
 	DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
 	chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -571,21 +571,21 @@ static void close_rx(struct atm_vcc *vcc)
 		pos = vcc->vci >> 1;
 		shift = (1-(vcc->vci & 1)) << 4;
 		zpokel(zatm_dev,zpeekl(zatm_dev,pos) & ~(0xffff << shift),pos);
-		zwait;
+		zwait();
 		zout(uPD98401_NOP,CMR);
-		zwait;
+		zwait();
 		zout(uPD98401_NOP,CMR);
 		spin_unlock_irqrestore(&zatm_dev->lock, flags);
 	}
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_DEACT_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	udelay(10); /* why oh why ... ? */
 	zout(uPD98401_CLOSE_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	if (!(zin(CMR) & uPD98401_CHAN_ADDR))
 		printk(KERN_CRIT DEV_LABEL "(itf %d): can't close RX channel "
 		    "%d\n",vcc->dev->number,zatm_vcc->rx_chan);
@@ -699,7 +699,7 @@ printk("NONONONOO!!!!\n");
 	skb_queue_tail(&zatm_vcc->tx_queue,skb);
 	DPRINTK("QRP=0x%08lx\n",zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+
 	  uPD98401_TXVC_QRP));
-	zwait;
+	zwait();
 	zout(uPD98401_TX_READY | (zatm_vcc->tx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -891,12 +891,12 @@ static void close_tx(struct atm_vcc *vcc)
 	}
 	spin_lock_irqsave(&zatm_dev->lock, flags);
 #if 0
-	zwait;
+	zwait();
 	zout(uPD98401_DEACT_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
 #endif
-	zwait;
+	zwait();
 	zout(uPD98401_CLOSE_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	if (!(zin(CMR) & uPD98401_CHAN_ADDR))
 		printk(KERN_CRIT DEV_LABEL "(itf %d): can't close TX channel "
 		    "%d\n",vcc->dev->number,chan);
@@ -926,9 +926,9 @@ static int open_tx_first(struct atm_vcc *vcc)
 	zatm_vcc->tx_chan = 0;
 	if (vcc->qos.txtp.traffic_class == ATM_NONE) return 0;
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_OPEN_CHAN,CMR);
-	zwait;
+	zwait();
 	DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
 	chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -1557,7 +1557,7 @@ static void zatm_phy_put(struct atm_dev *dev,unsigned char value,
 	struct zatm_dev *zatm_dev;
 
 	zatm_dev = ZATM_DEV(dev);
-	zwait;
+	zwait();
 	zout(value,CER);
 	zout(uPD98401_IND_ACC | uPD98401_IA_B0 |
 	    (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
@@ -1569,10 +1569,10 @@ static unsigned char zatm_phy_get(struct atm_dev *dev,unsigned long addr)
 	struct zatm_dev *zatm_dev;
 
 	zatm_dev = ZATM_DEV(dev);
-	zwait;
+	zwait();
 	zout(uPD98401_IND_ACC | uPD98401_IA_B0 | uPD98401_IA_RW |
 	  (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
-	zwait;
+	zwait();
 	return zin(CER) & 0xff;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 096/237] selftests/bpf: fix return value comparison for tests in test_libbpf.sh

[Sasha Levin]

From: Quentin Monnet <quentin.monnet@netronome.com>

[ Upstream commit c5fa5d602221362f8341ecd9e32d83194abf5bd9 ]

The return value for each test in test_libbpf.sh is compared with

    if (( $? == 0 )) ; then ...

This works well with bash, but not with dash, that /bin/sh is aliased to
on some systems (such as Ubuntu).

Let's replace this comparison by something that works on both shells.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_libbpf.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/test_libbpf.sh b/tools/testing/selftests/bpf/test_libbpf.sh
index 8b1bc96d8e0cc..2989b2e2d856d 100755
--- a/tools/testing/selftests/bpf/test_libbpf.sh
+++ b/tools/testing/selftests/bpf/test_libbpf.sh
@@ -6,7 +6,7 @@ export TESTNAME=test_libbpf
 # Determine selftest success via shell exit code
 exit_handler()
 {
-	if (( $? == 0 )); then
+	if [ $? -eq 0 ]; then
 		echo "selftests: $TESTNAME [PASS]";
 	else
 		echo "$TESTNAME: failed at file $LAST_LOADED" 1>&2
-- 
2.20.1

[PATCH AUTOSEL 4.19 097/237] tools: bpftool: fix completion for "bpftool map update"

[Sasha Levin]

From: Quentin Monnet <quentin.monnet@netronome.com>

[ Upstream commit fe8ecccc10b3adc071de05ca7af728ca1a4ac9aa ]

When trying to complete "bpftool map update" commands, the call to
printf would print an error message that would show on the command line
if no map is found to complete the command line.

Fix it by making sure we have map ids to complete the line with, before
we try to print something.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/bash-completion/bpftool | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool
index 598066c401912..c2b6b2176f3b7 100644
--- a/tools/bpf/bpftool/bash-completion/bpftool
+++ b/tools/bpf/bpftool/bash-completion/bpftool
@@ -143,7 +143,7 @@ _bpftool_map_update_map_type()
     local type
     type=$(bpftool -jp map show $keyword $ref | \
         command sed -n 's/.*"type": "\(.*\)",$/\1/p')
-    printf $type
+    [[ -n $type ]] && printf $type
 }
 
 _bpftool_map_update_get_id()
-- 
2.20.1

[PATCH AUTOSEL 4.19 100/237] libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist()

[Sasha Levin]

From: Ilya Dryomov <idryomov@gmail.com>

[ Upstream commit 894868330a1e038ea4a65dbb81741eef70ad71b1 ]

Because send_mds_reconnect() wants to send a message with a pagelist
and pass the ownership to the messenger, ceph_msg_data_add_pagelist()
consumes a ref which is then put in ceph_msg_data_destroy().  This
makes managing pagelists in the OSD client (where they are wrapped in
ceph_osd_data) unnecessarily hard because the handoff only happens in
ceph_osdc_start_request() instead of when the pagelist is passed to
ceph_osd_data_pagelist_init().  I counted several memory leaks on
various error paths.

Fix up ceph_msg_data_add_pagelist() and carry a pagelist ref in
ceph_osd_data.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/mds_client.c  | 2 +-
 net/ceph/messenger.c  | 1 +
 net/ceph/osd_client.c | 8 ++++++++
 3 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 09db6d08614d2..94494d05a94cb 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -2184,7 +2184,6 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
 
 	if (req->r_pagelist) {
 		struct ceph_pagelist *pagelist = req->r_pagelist;
-		refcount_inc(&pagelist->refcnt);
 		ceph_msg_data_add_pagelist(msg, pagelist);
 		msg->hdr.data_len = cpu_to_le32(pagelist->length);
 	} else {
@@ -3289,6 +3288,7 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
 	mutex_unlock(&mdsc->mutex);
 
 	up_read(&mdsc->snap_rwsem);
+	ceph_pagelist_release(pagelist);
 	return;
 
 fail:
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index f7d7f32ac673c..2c8cd339d59ea 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -3323,6 +3323,7 @@ void ceph_msg_data_add_pagelist(struct ceph_msg *msg,
 
 	data = ceph_msg_data_create(CEPH_MSG_DATA_PAGELIST);
 	BUG_ON(!data);
+	refcount_inc(&pagelist->refcnt);
 	data->pagelist = pagelist;
 
 	list_add_tail(&data->links, &msg->data);
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 76c41a84550e7..c3494c1fb3a9a 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -126,6 +126,9 @@ static void ceph_osd_data_init(struct ceph_osd_data *osd_data)
 	osd_data->type = CEPH_OSD_DATA_TYPE_NONE;
 }
 
+/*
+ * Consumes @pages if @own_pages is true.
+ */
 static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
 			struct page **pages, u64 length, u32 alignment,
 			bool pages_from_pool, bool own_pages)
@@ -138,6 +141,9 @@ static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
 	osd_data->own_pages = own_pages;
 }
 
+/*
+ * Consumes a ref on @pagelist.
+ */
 static void ceph_osd_data_pagelist_init(struct ceph_osd_data *osd_data,
 			struct ceph_pagelist *pagelist)
 {
@@ -362,6 +368,8 @@ static void ceph_osd_data_release(struct ceph_osd_data *osd_data)
 		num_pages = calc_pages_for((u64)osd_data->alignment,
 						(u64)osd_data->length);
 		ceph_release_page_vector(osd_data->pages, num_pages);
+	} else if (osd_data->type == CEPH_OSD_DATA_TYPE_PAGELIST) {
+		ceph_pagelist_release(osd_data->pagelist);
 	}
 	ceph_osd_data_init(osd_data);
 }
-- 
2.20.1

Re: [PATCH AUTOSEL 4.19 100/237] libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist()

[Ilya Dryomov]

On Sat, Nov 16, 2019 at 4:43 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Ilya Dryomov <idryomov@gmail.com>
>
> [ Upstream commit 894868330a1e038ea4a65dbb81741eef70ad71b1 ]
>
> Because send_mds_reconnect() wants to send a message with a pagelist
> and pass the ownership to the messenger, ceph_msg_data_add_pagelist()
> consumes a ref which is then put in ceph_msg_data_destroy().  This
> makes managing pagelists in the OSD client (where they are wrapped in
> ceph_osd_data) unnecessarily hard because the handoff only happens in
> ceph_osdc_start_request() instead of when the pagelist is passed to
> ceph_osd_data_pagelist_init().  I counted several memory leaks on
> various error paths.
>
> Fix up ceph_msg_data_add_pagelist() and carry a pagelist ref in
> ceph_osd_data.
>
> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  fs/ceph/mds_client.c  | 2 +-
>  net/ceph/messenger.c  | 1 +
>  net/ceph/osd_client.c | 8 ++++++++
>  3 files changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
> index 09db6d08614d2..94494d05a94cb 100644
> --- a/fs/ceph/mds_client.c
> +++ b/fs/ceph/mds_client.c
> @@ -2184,7 +2184,6 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
>
>         if (req->r_pagelist) {
>                 struct ceph_pagelist *pagelist = req->r_pagelist;
> -               refcount_inc(&pagelist->refcnt);
>                 ceph_msg_data_add_pagelist(msg, pagelist);
>                 msg->hdr.data_len = cpu_to_le32(pagelist->length);
>         } else {
> @@ -3289,6 +3288,7 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
>         mutex_unlock(&mdsc->mutex);
>
>         up_read(&mdsc->snap_rwsem);
> +       ceph_pagelist_release(pagelist);
>         return;
>
>  fail:
> diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
> index f7d7f32ac673c..2c8cd339d59ea 100644
> --- a/net/ceph/messenger.c
> +++ b/net/ceph/messenger.c
> @@ -3323,6 +3323,7 @@ void ceph_msg_data_add_pagelist(struct ceph_msg *msg,
>
>         data = ceph_msg_data_create(CEPH_MSG_DATA_PAGELIST);
>         BUG_ON(!data);
> +       refcount_inc(&pagelist->refcnt);
>         data->pagelist = pagelist;
>
>         list_add_tail(&data->links, &msg->data);
> diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
> index 76c41a84550e7..c3494c1fb3a9a 100644
> --- a/net/ceph/osd_client.c
> +++ b/net/ceph/osd_client.c
> @@ -126,6 +126,9 @@ static void ceph_osd_data_init(struct ceph_osd_data *osd_data)
>         osd_data->type = CEPH_OSD_DATA_TYPE_NONE;
>  }
>
> +/*
> + * Consumes @pages if @own_pages is true.
> + */
>  static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
>                         struct page **pages, u64 length, u32 alignment,
>                         bool pages_from_pool, bool own_pages)
> @@ -138,6 +141,9 @@ static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
>         osd_data->own_pages = own_pages;
>  }
>
> +/*
> + * Consumes a ref on @pagelist.
> + */
>  static void ceph_osd_data_pagelist_init(struct ceph_osd_data *osd_data,
>                         struct ceph_pagelist *pagelist)
>  {
> @@ -362,6 +368,8 @@ static void ceph_osd_data_release(struct ceph_osd_data *osd_data)
>                 num_pages = calc_pages_for((u64)osd_data->alignment,
>                                                 (u64)osd_data->length);
>                 ceph_release_page_vector(osd_data->pages, num_pages);
> +       } else if (osd_data->type == CEPH_OSD_DATA_TYPE_PAGELIST) {
> +               ceph_pagelist_release(osd_data->pagelist);
>         }
>         ceph_osd_data_init(osd_data);
>  }

Hi Sasha,

This commit was part of a larger series and shouldn't be backported on
its own.  Please drop it.

Thanks,

                Ilya

Re: [PATCH AUTOSEL 4.19 100/237] libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist()

[Sasha Levin]

On Sat, Nov 16, 2019 at 05:23:28PM +0100, Ilya Dryomov wrote:
>On Sat, Nov 16, 2019 at 4:43 PM Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Ilya Dryomov <idryomov@gmail.com>
>>
>> [ Upstream commit 894868330a1e038ea4a65dbb81741eef70ad71b1 ]
>>
>> Because send_mds_reconnect() wants to send a message with a pagelist
>> and pass the ownership to the messenger, ceph_msg_data_add_pagelist()
>> consumes a ref which is then put in ceph_msg_data_destroy().  This
>> makes managing pagelists in the OSD client (where they are wrapped in
>> ceph_osd_data) unnecessarily hard because the handoff only happens in
>> ceph_osdc_start_request() instead of when the pagelist is passed to
>> ceph_osd_data_pagelist_init().  I counted several memory leaks on
>> various error paths.
>>
>> Fix up ceph_msg_data_add_pagelist() and carry a pagelist ref in
>> ceph_osd_data.
>>
>> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>  fs/ceph/mds_client.c  | 2 +-
>>  net/ceph/messenger.c  | 1 +
>>  net/ceph/osd_client.c | 8 ++++++++
>>  3 files changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
>> index 09db6d08614d2..94494d05a94cb 100644
>> --- a/fs/ceph/mds_client.c
>> +++ b/fs/ceph/mds_client.c
>> @@ -2184,7 +2184,6 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
>>
>>         if (req->r_pagelist) {
>>                 struct ceph_pagelist *pagelist = req->r_pagelist;
>> -               refcount_inc(&pagelist->refcnt);
>>                 ceph_msg_data_add_pagelist(msg, pagelist);
>>                 msg->hdr.data_len = cpu_to_le32(pagelist->length);
>>         } else {
>> @@ -3289,6 +3288,7 @@ static void send_mds_reconnect(struct ceph_mds_client *mdsc,
>>         mutex_unlock(&mdsc->mutex);
>>
>>         up_read(&mdsc->snap_rwsem);
>> +       ceph_pagelist_release(pagelist);
>>         return;
>>
>>  fail:
>> diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
>> index f7d7f32ac673c..2c8cd339d59ea 100644
>> --- a/net/ceph/messenger.c
>> +++ b/net/ceph/messenger.c
>> @@ -3323,6 +3323,7 @@ void ceph_msg_data_add_pagelist(struct ceph_msg *msg,
>>
>>         data = ceph_msg_data_create(CEPH_MSG_DATA_PAGELIST);
>>         BUG_ON(!data);
>> +       refcount_inc(&pagelist->refcnt);
>>         data->pagelist = pagelist;
>>
>>         list_add_tail(&data->links, &msg->data);
>> diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
>> index 76c41a84550e7..c3494c1fb3a9a 100644
>> --- a/net/ceph/osd_client.c
>> +++ b/net/ceph/osd_client.c
>> @@ -126,6 +126,9 @@ static void ceph_osd_data_init(struct ceph_osd_data *osd_data)
>>         osd_data->type = CEPH_OSD_DATA_TYPE_NONE;
>>  }
>>
>> +/*
>> + * Consumes @pages if @own_pages is true.
>> + */
>>  static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
>>                         struct page **pages, u64 length, u32 alignment,
>>                         bool pages_from_pool, bool own_pages)
>> @@ -138,6 +141,9 @@ static void ceph_osd_data_pages_init(struct ceph_osd_data *osd_data,
>>         osd_data->own_pages = own_pages;
>>  }
>>
>> +/*
>> + * Consumes a ref on @pagelist.
>> + */
>>  static void ceph_osd_data_pagelist_init(struct ceph_osd_data *osd_data,
>>                         struct ceph_pagelist *pagelist)
>>  {
>> @@ -362,6 +368,8 @@ static void ceph_osd_data_release(struct ceph_osd_data *osd_data)
>>                 num_pages = calc_pages_for((u64)osd_data->alignment,
>>                                                 (u64)osd_data->length);
>>                 ceph_release_page_vector(osd_data->pages, num_pages);
>> +       } else if (osd_data->type == CEPH_OSD_DATA_TYPE_PAGELIST) {
>> +               ceph_pagelist_release(osd_data->pagelist);
>>         }
>>         ceph_osd_data_init(osd_data);
>>  }
>
>Hi Sasha,
>
>This commit was part of a larger series and shouldn't be backported on
>its own.  Please drop it.

Dropped, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 4.19 106/237] mISDN: Fix type of switch control variable in ctrl_teimanager

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit aeb5e02aca91522733eb1db595ac607d30c87767 ]

Clang warns (trimmed for brevity):

drivers/isdn/mISDN/tei.c:1193:7: warning: overflow converting case value
to switch condition type (2147764552 to 18446744071562348872) [-Wswitch]
        case IMHOLD_L1:
             ^
drivers/isdn/mISDN/tei.c:1187:7: warning: overflow converting case value
to switch condition type (2147764550 to 18446744071562348870) [-Wswitch]
        case IMCLEAR_L2:
             ^
2 warnings generated.

The root cause is that the _IOC macro can generate really large numbers,
which don't find into type int. My research into how GCC and Clang are
handling this at a low level didn't prove fruitful and surveying the
kernel tree shows that aside from here and a few places in the scsi
subsystem, everything that uses _IOC is at least of type 'unsigned int'.
Make that change here because as nothing in this function cares about
the signedness of the variable and it removes ambiguity, which is never
good when dealing with compilers.

While we're here, remove the unnecessary local variable ret (just return
-EINVAL and 0 directly).

Link: https://github.com/ClangBuiltLinux/linux/issues/67
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/tei.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index 12d9e5f4beb1f..58635b5f296f0 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -1180,8 +1180,7 @@ static int
 ctrl_teimanager(struct manager *mgr, void *arg)
 {
 	/* currently we only have one option */
-	int	*val = (int *)arg;
-	int	ret = 0;
+	unsigned int *val = (unsigned int *)arg;
 
 	switch (val[0]) {
 	case IMCLEAR_L2:
@@ -1197,9 +1196,9 @@ ctrl_teimanager(struct manager *mgr, void *arg)
 			test_and_clear_bit(OPTION_L1_HOLD, &mgr->options);
 		break;
 	default:
-		ret = -EINVAL;
+		return -EINVAL;
 	}
-	return ret;
+	return 0;
 }
 
 /* This function does create a L2 for fixed TEI in NT Mode */
-- 
2.20.1

[PATCH AUTOSEL 4.19 107/237] qlcnic: fix a return in qlcnic_dcb_get_capability()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit c94f026fb742b2d3199422751dbc4f6fc0e753d8 ]

These functions are supposed to return one on failure and zero on
success.  Returning a zero here could cause uninitialized variable
bugs in several of the callers.  For example:

    drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority()
    error: uninitialized symbol 'caps'.

Fixes: 48365e485275 ("qlcnic: dcb: Add support for CEE Netlink interface.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
index 4b76c69fe86d2..834208e55f7b8 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
@@ -883,7 +883,7 @@ static u8 qlcnic_dcb_get_capability(struct net_device *netdev, int capid,
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 
 	if (!test_bit(QLCNIC_DCB_STATE, &adapter->dcb->state))
-		return 0;
+		return 1;
 
 	switch (capid) {
 	case DCB_CAP_ATTR_PG:
-- 
2.20.1

[PATCH AUTOSEL 4.19 108/237] net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode

[Sasha Levin]

From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>

[ Upstream commit 9737cc99dd14b5b8b9d267618a6061feade8ea68 ]

After flushing all mcast entries from the table, the ones contained in
mc list of ndev are not restored when promisc mode is toggled off,
because they are considered as synched with ALE, thus, in order to
restore them after promisc mode - reset syncing info. This fix
touches only switch mode devices, including single port boards
like Beagle Bone.

Fixes: commit 5da1948969bc
("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update")

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/cpsw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index ef79d2b6070b9..8f93ef74fa407 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -642,6 +642,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
 
 			/* Clear all mcast from ALE */
 			cpsw_ale_flush_multicast(ale, ALE_ALL_PORTS, -1);
+			__dev_mc_unsync(ndev, NULL);
 
 			/* Flood All Unicast Packets to Host port */
 			cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 1);
-- 
2.20.1

[PATCH AUTOSEL 4.19 113/237] net: socionext: Stop PHY before resetting netsec

[Sasha Levin]

From: Masahisa Kojima <masahisa.kojima@linaro.org>

[ Upstream commit 8e850f25b5812aefedec6732732eb10e7b47cb5c ]

In ndo_stop, driver resets the netsec ethernet controller IP.
When the netsec IP is reset, HW running mode turns to NRM mode
and driver has to wait until this mode transition completes.

But mode transition to NRM will not complete if the PHY is
in normal operation state. Netsec IP requires PHY is in
power down state when it is reset.

This modification stops the PHY before resetting netsec.

Together with this modification, phy_addr is stored in netsec_priv
structure because ndev->phydev is not yet ready in ndo_init.

Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver")
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/socionext/netsec.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index d2caeb9edc044..28d582c18afb9 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -274,6 +274,7 @@ struct netsec_priv {
 	struct clk *clk;
 	u32 msg_enable;
 	u32 freq;
+	u32 phy_addr;
 	bool rx_cksum_offload_flag;
 };
 
@@ -1346,11 +1347,11 @@ static int netsec_netdev_stop(struct net_device *ndev)
 	netsec_uninit_pkt_dring(priv, NETSEC_RING_TX);
 	netsec_uninit_pkt_dring(priv, NETSEC_RING_RX);
 
-	ret = netsec_reset_hardware(priv, false);
-
 	phy_stop(ndev->phydev);
 	phy_disconnect(ndev->phydev);
 
+	ret = netsec_reset_hardware(priv, false);
+
 	pm_runtime_put_sync(priv->dev);
 
 	return ret;
@@ -1360,6 +1361,7 @@ static int netsec_netdev_init(struct net_device *ndev)
 {
 	struct netsec_priv *priv = netdev_priv(ndev);
 	int ret;
+	u16 data;
 
 	ret = netsec_alloc_dring(priv, NETSEC_RING_TX);
 	if (ret)
@@ -1369,6 +1371,11 @@ static int netsec_netdev_init(struct net_device *ndev)
 	if (ret)
 		goto err1;
 
+	/* set phy power down */
+	data = netsec_phy_read(priv->mii_bus, priv->phy_addr, MII_BMCR) |
+		BMCR_PDOWN;
+	netsec_phy_write(priv->mii_bus, priv->phy_addr, MII_BMCR, data);
+
 	ret = netsec_reset_hardware(priv, true);
 	if (ret)
 		goto err2;
@@ -1418,7 +1425,7 @@ static const struct net_device_ops netsec_netdev_ops = {
 };
 
 static int netsec_of_probe(struct platform_device *pdev,
-			   struct netsec_priv *priv)
+			   struct netsec_priv *priv, u32 *phy_addr)
 {
 	priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0);
 	if (!priv->phy_np) {
@@ -1426,6 +1433,8 @@ static int netsec_of_probe(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
+	*phy_addr = of_mdio_parse_addr(&pdev->dev, priv->phy_np);
+
 	priv->clk = devm_clk_get(&pdev->dev, NULL); /* get by 'phy_ref_clk' */
 	if (IS_ERR(priv->clk)) {
 		dev_err(&pdev->dev, "phy_ref_clk not found\n");
@@ -1626,12 +1635,14 @@ static int netsec_probe(struct platform_device *pdev)
 	}
 
 	if (dev_of_node(&pdev->dev))
-		ret = netsec_of_probe(pdev, priv);
+		ret = netsec_of_probe(pdev, priv, &phy_addr);
 	else
 		ret = netsec_acpi_probe(pdev, priv, &phy_addr);
 	if (ret)
 		goto free_ndev;
 
+	priv->phy_addr = phy_addr;
+
 	if (!priv->freq) {
 		dev_err(&pdev->dev, "missing PHY reference clock frequency\n");
 		ret = -ENODEV;
-- 
2.20.1

[PATCH AUTOSEL 4.19 123/237] net: ethernet: cadence: fix socket buffer corruption problem

[Sasha Levin]

From: Tristram Ha <Tristram.Ha@microchip.com>

[ Upstream commit 899ecaedd15599c22553d158f53b127cc1632dc2 ]

Socket buffer is not re-created when headroom is 2 and tailroom is 1.

Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 74eeb3a985bf1..f175b20ac510a 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -1721,7 +1721,7 @@ static int macb_pad_and_fcs(struct sk_buff **skb, struct net_device *ndev)
 			padlen = 0;
 		/* No room for FCS, need to reallocate skb. */
 		else
-			padlen = ETH_FCS_LEN - tailroom;
+			padlen = ETH_FCS_LEN;
 	} else {
 		/* Add room for FCS. */
 		padlen += ETH_FCS_LEN;
-- 
2.20.1

[PATCH AUTOSEL 4.19 124/237] bpf: devmap: fix wrong interface selection in notifier_call

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit f592f804831f1cf9d1f9966f58c80f150e6829b5 ]

The dev_map_notification() removes interface in devmap if
unregistering interface's ifindex is same.
But only checking ifindex is not enough because other netns can have
same ifindex. so that wrong interface selection could occurred.
Hence netdev pointer comparison code is added.

v2: compare netdev pointer instead of using net_eq() (Daniel Borkmann)
v1: Initial patch

Fixes: 2ddf71e23cc2 ("net: add notifier hooks for devmap bpf map")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/devmap.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c
index fc500ca464d00..1defea4b27553 100644
--- a/kernel/bpf/devmap.c
+++ b/kernel/bpf/devmap.c
@@ -520,8 +520,7 @@ static int dev_map_notification(struct notifier_block *notifier,
 				struct bpf_dtab_netdev *dev, *odev;
 
 				dev = READ_ONCE(dtab->netdev_map[i]);
-				if (!dev ||
-				    dev->dev->ifindex != netdev->ifindex)
+				if (!dev || netdev != dev->dev)
 					continue;
 				odev = cmpxchg(&dtab->netdev_map[i], dev, NULL);
 				if (dev == odev)
-- 
2.20.1

[PATCH AUTOSEL 4.19 125/237] bpf, btf: fix a missing check bug in btf_parse

[Sasha Levin]

From: Martin Lau <kafai@fb.com>

[ Upstream commit 4a6998aff82a20a1aece86a186d8e5263f8b2315 ]

Wenwen Wang reported:

  In btf_parse(), the header of the user-space btf data 'btf_data'
  is firstly parsed and verified through btf_parse_hdr().
  In btf_parse_hdr(), the header is copied from user-space 'btf_data'
  to kernel-space 'btf->hdr' and then verified. If no error happens
  during the verification process, the whole data of 'btf_data',
  including the header, is then copied to 'data' in btf_parse(). It
  is obvious that the header is copied twice here. More importantly,
  no check is enforced after the second copy to make sure the headers
  obtained in these two copies are same. Given that 'btf_data' resides
  in the user space, a malicious user can race to modify the header
  between these two copies. By doing so, the user can inject
  inconsistent data, which can cause undefined behavior of the
  kernel and introduce potential security risk.

This issue is similar to the one fixed in commit 8af03d1ae2e1 ("bpf:
btf: Fix a missing check bug"). To fix it, this patch copies the user
'btf_data' *before* parsing / verifying the BTF header.

Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Co-developed-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/btf.c | 55 ++++++++++++++++++++++--------------------------
 1 file changed, 25 insertions(+), 30 deletions(-)

diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index 138f0302692ec..ee4c82667d659 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -2067,50 +2067,44 @@ static int btf_check_sec_info(struct btf_verifier_env *env,
 	return 0;
 }
 
-static int btf_parse_hdr(struct btf_verifier_env *env, void __user *btf_data,
-			 u32 btf_data_size)
+static int btf_parse_hdr(struct btf_verifier_env *env)
 {
+	u32 hdr_len, hdr_copy, btf_data_size;
 	const struct btf_header *hdr;
-	u32 hdr_len, hdr_copy;
-	/*
-	 * Minimal part of the "struct btf_header" that
-	 * contains the hdr_len.
-	 */
-	struct btf_min_header {
-		u16	magic;
-		u8	version;
-		u8	flags;
-		u32	hdr_len;
-	} __user *min_hdr;
 	struct btf *btf;
 	int err;
 
 	btf = env->btf;
-	min_hdr = btf_data;
+	btf_data_size = btf->data_size;
 
-	if (btf_data_size < sizeof(*min_hdr)) {
+	if (btf_data_size <
+	    offsetof(struct btf_header, hdr_len) + sizeof(hdr->hdr_len)) {
 		btf_verifier_log(env, "hdr_len not found");
 		return -EINVAL;
 	}
 
-	if (get_user(hdr_len, &min_hdr->hdr_len))
-		return -EFAULT;
-
+	hdr = btf->data;
+	hdr_len = hdr->hdr_len;
 	if (btf_data_size < hdr_len) {
 		btf_verifier_log(env, "btf_header not found");
 		return -EINVAL;
 	}
 
-	err = bpf_check_uarg_tail_zero(btf_data, sizeof(btf->hdr), hdr_len);
-	if (err) {
-		if (err == -E2BIG)
-			btf_verifier_log(env, "Unsupported btf_header");
-		return err;
+	/* Ensure the unsupported header fields are zero */
+	if (hdr_len > sizeof(btf->hdr)) {
+		u8 *expected_zero = btf->data + sizeof(btf->hdr);
+		u8 *end = btf->data + hdr_len;
+
+		for (; expected_zero < end; expected_zero++) {
+			if (*expected_zero) {
+				btf_verifier_log(env, "Unsupported btf_header");
+				return -E2BIG;
+			}
+		}
 	}
 
 	hdr_copy = min_t(u32, hdr_len, sizeof(btf->hdr));
-	if (copy_from_user(&btf->hdr, btf_data, hdr_copy))
-		return -EFAULT;
+	memcpy(&btf->hdr, btf->data, hdr_copy);
 
 	hdr = &btf->hdr;
 
@@ -2183,10 +2177,6 @@ static struct btf *btf_parse(void __user *btf_data, u32 btf_data_size,
 	}
 	env->btf = btf;
 
-	err = btf_parse_hdr(env, btf_data, btf_data_size);
-	if (err)
-		goto errout;
-
 	data = kvmalloc(btf_data_size, GFP_KERNEL | __GFP_NOWARN);
 	if (!data) {
 		err = -ENOMEM;
@@ -2195,13 +2185,18 @@ static struct btf *btf_parse(void __user *btf_data, u32 btf_data_size,
 
 	btf->data = data;
 	btf->data_size = btf_data_size;
-	btf->nohdr_data = btf->data + btf->hdr.hdr_len;
 
 	if (copy_from_user(data, btf_data, btf_data_size)) {
 		err = -EFAULT;
 		goto errout;
 	}
 
+	err = btf_parse_hdr(env);
+	if (err)
+		goto errout;
+
+	btf->nohdr_data = btf->data + btf->hdr.hdr_len;
+
 	err = btf_parse_str_sec(env);
 	if (err)
 		goto errout;
-- 
2.20.1

[PATCH AUTOSEL 4.19 127/237] sparc64: Rework xchg() definition to avoid warnings.

[Sasha Levin]

From: "David S. Miller" <davem@davemloft.net>

[ Upstream commit 6c2fc9cddc1ffdef8ada1dc8404e5affae849953 ]

Such as:

fs/ocfs2/file.c: In function ‘ocfs2_file_write_iter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

and

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_xdp_setup’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/include/asm/cmpxchg_64.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/sparc/include/asm/cmpxchg_64.h b/arch/sparc/include/asm/cmpxchg_64.h
index f71ef3729888f..316faa0130bab 100644
--- a/arch/sparc/include/asm/cmpxchg_64.h
+++ b/arch/sparc/include/asm/cmpxchg_64.h
@@ -52,7 +52,12 @@ static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long
 	return val;
 }
 
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define xchg(ptr,x)							\
+({	__typeof__(*(ptr)) __ret;					\
+	__ret = (__typeof__(*(ptr)))					\
+		__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)));	\
+	__ret;								\
+})
 
 void __xchg_called_with_bad_pointer(void);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 134/237] macsec: update operstate when lower device changes

[Sasha Levin]

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit e6ac075882b2afcdf2d5ab328ce4ab42a1eb9593 ]

Like all other virtual devices (macvlan, vlan), the operstate of a
macsec device should match the state of its lower device. This is done
by calling netif_stacked_transfer_operstate from its netdevice notifier.

We also need to call netif_stacked_transfer_operstate when a new macsec
device is created, so that its operstate is set properly. This is only
relevant when we try to bring the device up directly when we create it.

Radu Rendec proposed a similar patch, inspired from the 802.1q driver,
that included changing the administrative state of the macsec device,
instead of just the operstate. This version is similar to what the
macvlan driver does, and updates only the operstate.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Reported-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 05115fb0c97a9..50acd8c9d7f53 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -3305,6 +3305,9 @@ static int macsec_newlink(struct net *net, struct net_device *dev,
 	if (err < 0)
 		goto del_dev;
 
+	netif_stacked_transfer_operstate(real_dev, dev);
+	linkwatch_fire_event(dev);
+
 	macsec_generation++;
 
 	return 0;
@@ -3489,6 +3492,20 @@ static int macsec_notify(struct notifier_block *this, unsigned long event,
 		return NOTIFY_DONE;
 
 	switch (event) {
+	case NETDEV_DOWN:
+	case NETDEV_UP:
+	case NETDEV_CHANGE: {
+		struct macsec_dev *m, *n;
+		struct macsec_rxh_data *rxd;
+
+		rxd = macsec_data_rtnl(real_dev);
+		list_for_each_entry_safe(m, n, &rxd->secys, secys) {
+			struct net_device *dev = m->secy.netdev;
+
+			netif_stacked_transfer_operstate(real_dev, dev);
+		}
+		break;
+	}
 	case NETDEV_UNREGISTER: {
 		struct macsec_dev *m, *n;
 		struct macsec_rxh_data *rxd;
-- 
2.20.1

[PATCH AUTOSEL 4.19 135/237] macsec: let the administrator set UP state even if lowerdev is down

[Sasha Levin]

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit 07bddef9839378bd6f95b393cf24c420529b4ef1 ]

Currently, the kernel doesn't let the administrator set a macsec device
up unless its lower device is currently up. This is inconsistent, as a
macsec device that is up won't automatically go down when its lower
device goes down.

Now that linkstate propagation works, there's really no reason for this
limitation, so let's remove it.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index 50acd8c9d7f53..10a8ef2d025a1 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -2813,9 +2813,6 @@ static int macsec_dev_open(struct net_device *dev)
 	struct net_device *real_dev = macsec->real_dev;
 	int err;
 
-	if (!(real_dev->flags & IFF_UP))
-		return -ENETDOWN;
-
 	err = dev_uc_add(real_dev, dev->dev_addr);
 	if (err < 0)
 		return err;
-- 
2.20.1

[PATCH AUTOSEL 4.19 142/237] ipv4/igmp: fix v1/v2 switchback timeout based on rfc3376, 8.12

[Sasha Levin]

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 966c37f2d77eb44d47af8e919267b1ba675b2eca ]

Similiar with ipv6 mcast commit 89225d1ce6af3 ("net: ipv6: mld: fix v1/v2
switchback timeout to rfc3810, 9.12.")

i) RFC3376 8.12. Older Version Querier Present Timeout says:

   The Older Version Querier Interval is the time-out for transitioning
   a host back to IGMPv3 mode once an older version query is heard.
   When an older version query is received, hosts set their Older
   Version Querier Present Timer to Older Version Querier Interval.

   This value MUST be ((the Robustness Variable) times (the Query
   Interval in the last Query received)) plus (one Query Response
   Interval).

Currently we only use a hardcode value IGMP_V1/v2_ROUTER_PRESENT_TIMEOUT.
Fix it by adding two new items mr_qi(Query Interval) and mr_qri(Query Response
Interval) in struct in_device.

Now we can calculate the switchback time via (mr_qrv * mr_qi) + mr_qri.
We need update these values when receive IGMPv3 queries.

Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/inetdevice.h |  4 ++-
 net/ipv4/igmp.c            | 53 ++++++++++++++++++++++++++------------
 2 files changed, 39 insertions(+), 18 deletions(-)

diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index c759d1cbcedd8..a64f21a97369a 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -37,7 +37,9 @@ struct in_device {
 	unsigned long		mr_v1_seen;
 	unsigned long		mr_v2_seen;
 	unsigned long		mr_maxdelay;
-	unsigned char		mr_qrv;
+	unsigned long		mr_qi;		/* Query Interval */
+	unsigned long		mr_qri;		/* Query Response Interval */
+	unsigned char		mr_qrv;		/* Query Robustness Variable */
 	unsigned char		mr_gq_running;
 	unsigned char		mr_ifc_count;
 	struct timer_list	mr_gq_timer;	/* general query timer */
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index b2240b7f225d5..523d26f5e22e2 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -111,13 +111,10 @@
 #ifdef CONFIG_IP_MULTICAST
 /* Parameter names and values are taken from igmp-v2-06 draft */
 
-#define IGMP_V1_ROUTER_PRESENT_TIMEOUT		(400*HZ)
-#define IGMP_V2_ROUTER_PRESENT_TIMEOUT		(400*HZ)
 #define IGMP_V2_UNSOLICITED_REPORT_INTERVAL	(10*HZ)
 #define IGMP_V3_UNSOLICITED_REPORT_INTERVAL	(1*HZ)
+#define IGMP_QUERY_INTERVAL			(125*HZ)
 #define IGMP_QUERY_RESPONSE_INTERVAL		(10*HZ)
-#define IGMP_QUERY_ROBUSTNESS_VARIABLE		2
-
 
 #define IGMP_INITIAL_REPORT_DELAY		(1)
 
@@ -953,13 +950,15 @@ static bool igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
 
 			max_delay = IGMP_QUERY_RESPONSE_INTERVAL;
 			in_dev->mr_v1_seen = jiffies +
-				IGMP_V1_ROUTER_PRESENT_TIMEOUT;
+				(in_dev->mr_qrv * in_dev->mr_qi) +
+				in_dev->mr_qri;
 			group = 0;
 		} else {
 			/* v2 router present */
 			max_delay = ih->code*(HZ/IGMP_TIMER_SCALE);
 			in_dev->mr_v2_seen = jiffies +
-				IGMP_V2_ROUTER_PRESENT_TIMEOUT;
+				(in_dev->mr_qrv * in_dev->mr_qi) +
+				in_dev->mr_qri;
 		}
 		/* cancel the interface change timer */
 		in_dev->mr_ifc_count = 0;
@@ -999,8 +998,21 @@ static bool igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
 		if (!max_delay)
 			max_delay = 1;	/* can't mod w/ 0 */
 		in_dev->mr_maxdelay = max_delay;
-		if (ih3->qrv)
-			in_dev->mr_qrv = ih3->qrv;
+
+		/* RFC3376, 4.1.6. QRV and 4.1.7. QQIC, when the most recently
+		 * received value was zero, use the default or statically
+		 * configured value.
+		 */
+		in_dev->mr_qrv = ih3->qrv ?: net->ipv4.sysctl_igmp_qrv;
+		in_dev->mr_qi = IGMPV3_QQIC(ih3->qqic)*HZ ?: IGMP_QUERY_INTERVAL;
+
+		/* RFC3376, 8.3. Query Response Interval:
+		 * The number of seconds represented by the [Query Response
+		 * Interval] must be less than the [Query Interval].
+		 */
+		if (in_dev->mr_qri >= in_dev->mr_qi)
+			in_dev->mr_qri = (in_dev->mr_qi/HZ - 1)*HZ;
+
 		if (!group) { /* general query */
 			if (ih3->nsrcs)
 				return true;	/* no sources allowed */
@@ -1738,18 +1750,30 @@ void ip_mc_down(struct in_device *in_dev)
 	ip_mc_dec_group(in_dev, IGMP_ALL_HOSTS);
 }
 
-void ip_mc_init_dev(struct in_device *in_dev)
-{
 #ifdef CONFIG_IP_MULTICAST
+static void ip_mc_reset(struct in_device *in_dev)
+{
 	struct net *net = dev_net(in_dev->dev);
+
+	in_dev->mr_qi = IGMP_QUERY_INTERVAL;
+	in_dev->mr_qri = IGMP_QUERY_RESPONSE_INTERVAL;
+	in_dev->mr_qrv = net->ipv4.sysctl_igmp_qrv;
+}
+#else
+static void ip_mc_reset(struct in_device *in_dev)
+{
+}
 #endif
+
+void ip_mc_init_dev(struct in_device *in_dev)
+{
 	ASSERT_RTNL();
 
 #ifdef CONFIG_IP_MULTICAST
 	timer_setup(&in_dev->mr_gq_timer, igmp_gq_timer_expire, 0);
 	timer_setup(&in_dev->mr_ifc_timer, igmp_ifc_timer_expire, 0);
-	in_dev->mr_qrv = net->ipv4.sysctl_igmp_qrv;
 #endif
+	ip_mc_reset(in_dev);
 
 	spin_lock_init(&in_dev->mc_tomb_lock);
 }
@@ -1759,15 +1783,10 @@ void ip_mc_init_dev(struct in_device *in_dev)
 void ip_mc_up(struct in_device *in_dev)
 {
 	struct ip_mc_list *pmc;
-#ifdef CONFIG_IP_MULTICAST
-	struct net *net = dev_net(in_dev->dev);
-#endif
 
 	ASSERT_RTNL();
 
-#ifdef CONFIG_IP_MULTICAST
-	in_dev->mr_qrv = net->ipv4.sysctl_igmp_qrv;
-#endif
+	ip_mc_reset(in_dev);
 	ip_mc_inc_group(in_dev, IGMP_ALL_HOSTS);
 
 	for_each_pmc_rtnl(in_dev, pmc) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 166/237] igb: shorten maximum PHC timecounter update interval

[Sasha Levin]

From: Miroslav Lichvar <mlichvar@redhat.com>

[ Upstream commit 094bf4d0e9657f6ea1ee3d7e07ce3970796949ce ]

The timecounter needs to be updated at least once per ~550 seconds in
order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old
timestamp.

Since commit 500462a9d ("timers: Switch to a non-cascading wheel"),
scheduling of delayed work seems to be less accurate and a requested
delay of 540 seconds may actually be longer than 550 seconds. Shorten
the delay to 480 seconds to be sure the timecounter is updated in time.

This fixes an issue with HW timestamps on 82580/I350/I354 being off by
~1100 seconds for few seconds every ~9 minutes.

Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_ptp.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 9f4d700e09df3..29ced6b74d364 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -51,9 +51,15 @@
  *
  * The 40 bit 82580 SYSTIM overflows every
  *   2^40 * 10^-9 /  60  = 18.3 minutes.
+ *
+ * SYSTIM is converted to real time using a timecounter. As
+ * timecounter_cyc2time() allows old timestamps, the timecounter
+ * needs to be updated at least once per half of the SYSTIM interval.
+ * Scheduling of delayed work is not very accurate, so we aim for 8
+ * minutes to be sure the actual interval is shorter than 9.16 minutes.
  */
 
-#define IGB_SYSTIM_OVERFLOW_PERIOD	(HZ * 60 * 9)
+#define IGB_SYSTIM_OVERFLOW_PERIOD	(HZ * 60 * 8)
 #define IGB_PTP_TX_TIMEOUT		(HZ * 15)
 #define INCPERIOD_82576			BIT(E1000_TIMINCA_16NS_SHIFT)
 #define INCVALUE_82576_MASK		GENMASK(E1000_TIMINCA_16NS_SHIFT - 1, 0)
-- 
2.20.1

[PATCH AUTOSEL 4.19 167/237] fm10k: ensure completer aborts are marked as non-fatal after a resume

[Sasha Levin]

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit e330af788998b0de4da4f5bd7ddd087507999800 ]

VF drivers can trigger PCIe completer aborts any time they read a queue
that they don't own. Even in nominal circumstances, it is not possible
to prevent the VF driver from reading queues it doesn't own. VF drivers
may attempt to read queues it previously owned, but which it no longer
does due to a PF reset.

Normally these completer aborts aren't an issue. However, on some
platforms these trigger machine check errors. This is true even if we
lower their severity from fatal to non-fatal. Indeed, we already have
code for lowering the severity.

We could attempt to mask these errors conditionally around resets, which
is the most common time they would occur. However this would essentially
be a race between the PF and VF drivers, and we may still occasionally
see machine check exceptions on these strictly configured platforms.

Instead, mask the errors entirely any time we resume VFs. By doing so,
we prevent the completer aborts from being sent to the parent PCIe
device, and thus these strict platforms will not upgrade them into
machine check errors.

Additionally, we don't lose any information by masking these errors,
because we'll still report VFs which attempt to access queues via the
FUM_BAD_VF_QACCESS errors.

Without this change, on platforms where completer aborts cause machine
check exceptions, the VF reading queues it doesn't own could crash the
host system. Masking the completer abort prevents this, so we should
mask it for good, and not just around a PCIe reset. Otherwise malicious
or misconfigured VFs could cause the host system to crash.

Because we are masking the error entirely, there is little reason to
also keep setting the severity bit, so that code is also removed.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/fm10k/fm10k_iov.c | 48 ++++++++++++--------
 1 file changed, 28 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
index e707d717012fa..618032612f52d 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c
@@ -302,6 +302,28 @@ void fm10k_iov_suspend(struct pci_dev *pdev)
 	}
 }
 
+static void fm10k_mask_aer_comp_abort(struct pci_dev *pdev)
+{
+	u32 err_mask;
+	int pos;
+
+	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
+	if (!pos)
+		return;
+
+	/* Mask the completion abort bit in the ERR_UNCOR_MASK register,
+	 * preventing the device from reporting these errors to the upstream
+	 * PCIe root device. This avoids bringing down platforms which upgrade
+	 * non-fatal completer aborts into machine check exceptions. Completer
+	 * aborts can occur whenever a VF reads a queue it doesn't own.
+	 */
+	pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_MASK, &err_mask);
+	err_mask |= PCI_ERR_UNC_COMP_ABORT;
+	pci_write_config_dword(pdev, pos + PCI_ERR_UNCOR_MASK, err_mask);
+
+	mmiowb();
+}
+
 int fm10k_iov_resume(struct pci_dev *pdev)
 {
 	struct fm10k_intfc *interface = pci_get_drvdata(pdev);
@@ -317,6 +339,12 @@ int fm10k_iov_resume(struct pci_dev *pdev)
 	if (!iov_data)
 		return -ENOMEM;
 
+	/* Lower severity of completer abort error reporting as
+	 * the VFs can trigger this any time they read a queue
+	 * that they don't own.
+	 */
+	fm10k_mask_aer_comp_abort(pdev);
+
 	/* allocate hardware resources for the VFs */
 	hw->iov.ops.assign_resources(hw, num_vfs, num_vfs);
 
@@ -460,20 +488,6 @@ void fm10k_iov_disable(struct pci_dev *pdev)
 	fm10k_iov_free_data(pdev);
 }
 
-static void fm10k_disable_aer_comp_abort(struct pci_dev *pdev)
-{
-	u32 err_sev;
-	int pos;
-
-	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
-	if (!pos)
-		return;
-
-	pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, &err_sev);
-	err_sev &= ~PCI_ERR_UNC_COMP_ABORT;
-	pci_write_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, err_sev);
-}
-
 int fm10k_iov_configure(struct pci_dev *pdev, int num_vfs)
 {
 	int current_vfs = pci_num_vf(pdev);
@@ -495,12 +509,6 @@ int fm10k_iov_configure(struct pci_dev *pdev, int num_vfs)
 
 	/* allocate VFs if not already allocated */
 	if (num_vfs && num_vfs != current_vfs) {
-		/* Disable completer abort error reporting as
-		 * the VFs can trigger this any time they read a queue
-		 * that they don't own.
-		 */
-		fm10k_disable_aer_comp_abort(pdev);
-
 		err = pci_enable_sriov(pdev, num_vfs);
 		if (err) {
 			dev_err(&pdev->dev,
-- 
2.20.1

[PATCH AUTOSEL 4.19 168/237] net: hns3: bugfix for buffer not free problem during resetting

[Sasha Levin]

From: Huazhong Tan <tanhuazhong@huawei.com>

[ Upstream commit 73b907a083b8a8c1c62cb494bc9fbe6ae086c460 ]

When hns3_get_ring_config()/hns3_queue_to_ring()/
hns3_get_vector_ring_chain() failed during resetting, the allocated
memory has not been freed before these three functions return. So
this patch adds error handler in these functions to fix it.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3_enet.c   | 24 ++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 0ccfa6a845353..c1873e04b0fb6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2558,7 +2558,7 @@ static int hns3_get_vector_ring_chain(struct hns3_enet_tqp_vector *tqp_vector,
 			chain = devm_kzalloc(&pdev->dev, sizeof(*chain),
 					     GFP_KERNEL);
 			if (!chain)
-				return -ENOMEM;
+				goto err_free_chain;
 
 			cur_chain->next = chain;
 			chain->tqp_index = tx_ring->tqp->tqp_index;
@@ -2588,7 +2588,7 @@ static int hns3_get_vector_ring_chain(struct hns3_enet_tqp_vector *tqp_vector,
 	while (rx_ring) {
 		chain = devm_kzalloc(&pdev->dev, sizeof(*chain), GFP_KERNEL);
 		if (!chain)
-			return -ENOMEM;
+			goto err_free_chain;
 
 		cur_chain->next = chain;
 		chain->tqp_index = rx_ring->tqp->tqp_index;
@@ -2603,6 +2603,16 @@ static int hns3_get_vector_ring_chain(struct hns3_enet_tqp_vector *tqp_vector,
 	}
 
 	return 0;
+
+err_free_chain:
+	cur_chain = head->next;
+	while (cur_chain) {
+		chain = cur_chain->next;
+		devm_kfree(&pdev->dev, chain);
+		cur_chain = chain;
+	}
+
+	return -ENOMEM;
 }
 
 static void hns3_free_vector_ring_chain(struct hns3_enet_tqp_vector *tqp_vector,
@@ -2847,8 +2857,10 @@ static int hns3_queue_to_ring(struct hnae3_queue *tqp,
 		return ret;
 
 	ret = hns3_ring_get_cfg(tqp, priv, HNAE3_RING_TYPE_RX);
-	if (ret)
+	if (ret) {
+		devm_kfree(priv->dev, priv->ring_data[tqp->tqp_index].ring);
 		return ret;
+	}
 
 	return 0;
 }
@@ -2875,6 +2887,12 @@ static int hns3_get_ring_config(struct hns3_nic_priv *priv)
 
 	return 0;
 err:
+	while (i--) {
+		devm_kfree(priv->dev, priv->ring_data[i].ring);
+		devm_kfree(priv->dev,
+			   priv->ring_data[i + h->kinfo.num_tqps].ring);
+	}
+
 	devm_kfree(&pdev->dev, priv->ring_data);
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 169/237] net: hns3: bugfix for reporting unknown vector0 interrupt repeatly problem

[Sasha Levin]

From: Huazhong Tan <tanhuazhong@huawei.com>

[ Upstream commit 0d4411408a7fb9aad0645f23911d9bfdd2ce3177 ]

The current driver supports handling two vector0 interrupts, reset and
mailbox. When the hardware reports an interrupt of another type of
interrupt source, if the driver does not process the interrupt, but
enables the interrupt, the hardware will repeatedly report the unknown
interrupt.

Therefore, the driver enables the vector0 interrupt after clearing the
known type of interrupt source. Other conditions are not enabled.

Fixes: cd8c5c269b1d ("net: hns3: Fix for hclge_reset running repeatly problem")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 89ca69fa2b97b..0b622d20cd305 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2574,7 +2574,7 @@ static irqreturn_t hclge_misc_irq_handle(int irq, void *data)
 	}
 
 	/* clear the source of interrupt if it is not cause by reset */
-	if (event_cause != HCLGE_VECTOR0_EVENT_RST) {
+	if (event_cause == HCLGE_VECTOR0_EVENT_MBX) {
 		hclge_clear_event_cause(hdev, event_cause, clearval);
 		hclge_enable_vector(&hdev->misc_vector, true);
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 170/237] net: hns3: bugfix for is_valid_csq_clean_head()

[Sasha Levin]

From: Huazhong Tan <tanhuazhong@huawei.com>

[ Upstream commit 6d71ec6cbf74ac9c2823ef751b1baa5b889bb3ac ]

The HEAD pointer of the hardware command queue maybe equal to the command
queue's next_to_use in the driver, so that does not belong to the invalid
HEAD pointer, since the hardware may not process the command in time,
causing the HEAD pointer to be too late to update. The variables' name
in this function is unreadable, so give them a more readable one.

Fixes: 3ff504908f95 ("net: hns3: fix a dead loop in hclge_cmd_csq_clean")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c   | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
index 68026a5ad7e77..690f62ed87dca 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
@@ -24,15 +24,15 @@ static int hclge_ring_space(struct hclge_cmq_ring *ring)
 	return ring->desc_num - used - 1;
 }
 
-static int is_valid_csq_clean_head(struct hclge_cmq_ring *ring, int h)
+static int is_valid_csq_clean_head(struct hclge_cmq_ring *ring, int head)
 {
-	int u = ring->next_to_use;
-	int c = ring->next_to_clean;
+	int ntu = ring->next_to_use;
+	int ntc = ring->next_to_clean;
 
-	if (unlikely(h >= ring->desc_num))
-		return 0;
+	if (ntu > ntc)
+		return head >= ntc && head <= ntu;
 
-	return u > c ? (h > c && h <= u) : (h > c || h <= u);
+	return head >= ntc || head <= ntu;
 }
 
 static int hclge_alloc_cmd_desc(struct hclge_cmq_ring *ring)
-- 
2.20.1

[PATCH AUTOSEL 4.19 171/237] net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read

[Sasha Levin]

From: Huazhong Tan <tanhuazhong@huawei.com>

[ Upstream commit 1c12493809924deda6c0834cb2f2c5a6dc786390 ]

When there is a PHY, the driver needs to complete some operations through
MDIO during reset reinitialization, so HCLGE_STATE_CMD_DISABLE is more
suitable than HCLGE_STATE_RST_HANDLING to prevent the MDIO operation from
being sent during the hardware reset.

Fixes: b50ae26c57cb ("net: hns3: never send command queue message to IMP when reset)
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 398971a062f47..03491e8ebb730 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -54,7 +54,7 @@ static int hclge_mdio_write(struct mii_bus *bus, int phyid, int regnum,
 	struct hclge_desc desc;
 	int ret;
 
-	if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state))
+	if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state))
 		return 0;
 
 	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, false);
@@ -92,7 +92,7 @@ static int hclge_mdio_read(struct mii_bus *bus, int phyid, int regnum)
 	struct hclge_desc desc;
 	int ret;
 
-	if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state))
+	if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state))
 		return 0;
 
 	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, true);
-- 
2.20.1

[PATCH AUTOSEL 4.19 172/237] ntb_netdev: fix sleep time mismatch

[Sasha Levin]

From: Jon Mason <jdmason@kudzu.us>

[ Upstream commit a861594b1b7ffd630f335b351c4e9f938feadb8e ]

The tx_time should be in usecs (according to the comment above the
variable), but the setting of the timer during the rearming is done in
msecs.  Change it to match the expected units.

Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev")
Suggested-by: Gerd W. Haeussler <gerd.haeussler@cesys-it.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ntb_netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c
index b12023bc2cab5..df8d49ad48c38 100644
--- a/drivers/net/ntb_netdev.c
+++ b/drivers/net/ntb_netdev.c
@@ -236,7 +236,7 @@ static void ntb_netdev_tx_timer(struct timer_list *t)
 	struct net_device *ndev = dev->ndev;
 
 	if (ntb_transport_tx_free_entry(dev->qp) < tx_stop) {
-		mod_timer(&dev->tx_timer, jiffies + msecs_to_jiffies(tx_time));
+		mod_timer(&dev->tx_timer, jiffies + usecs_to_jiffies(tx_time));
 	} else {
 		/* Make sure anybody stopping the queue after this sees the new
 		 * value of ntb_transport_tx_free_entry()
-- 
2.20.1

[PATCH AUTOSEL 4.19 183/237] net: do not abort bulk send on BQL status

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit fe60faa5063822f2d555f4f326c7dd72a60929bf ]

Before calling dev_hard_start_xmit(), upper layers tried
to cook optimal skb list based on BQL budget.

Problem is that GSO packets can end up comsuming more than
the BQL budget.

Breaking the loop is not useful, since requeued packets
are ahead of any packets still in the qdisc.

It is also more expensive, since next TX completion will
push these packets later, while skbs are not in cpu caches.

It is also a behavior difference with TSO packets, that can
break the BQL limit by a large amount.

Note that drivers should use __netdev_tx_sent_queue()
in order to have optimal xmit_more support, and avoid
useless atomic operations as shown in the following patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 4a2ee1ce6c024..0a900e353cfff 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3277,7 +3277,7 @@ struct sk_buff *dev_hard_start_xmit(struct sk_buff *first, struct net_device *de
 		}
 
 		skb = next;
-		if (netif_xmit_stopped(txq) && skb) {
+		if (netif_tx_queue_stopped(txq) && skb) {
 			rc = NETDEV_TX_BUSY;
 			break;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.19 186/237] openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELS

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit a277d516de5f498c91d91189717ef7e01102ad27 ]

When CONFIG_CC_OPTIMIZE_FOR_DEBUGGING is enabled, the compiler
fails to optimize out a dead code path, which leads to a link failure:

net/openvswitch/conntrack.o: In function `ovs_ct_set_labels':
conntrack.c:(.text+0x2e60): undefined reference to `nf_connlabels_replace'

In this configuration, we can take a shortcut, and completely
remove the contrack label code. This may also help the regular
optimization.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/openvswitch/conntrack.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index 35ae64cbef33f..46aa1aa51db41 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -1199,7 +1199,8 @@ static int ovs_ct_commit(struct net *net, struct sw_flow_key *key,
 					 &info->labels.mask);
 		if (err)
 			return err;
-	} else if (labels_nonzero(&info->labels.mask)) {
+	} else if (IS_ENABLED(CONFIG_NF_CONNTRACK_LABELS) &&
+		   labels_nonzero(&info->labels.mask)) {
 		err = ovs_ct_set_labels(ct, key, &info->labels.value,
 					&info->labels.mask);
 		if (err)
-- 
2.20.1

[PATCH AUTOSEL 4.19 191/237] sock_diag: fix autoloading of the raw_diag module

[Sasha Levin]

From: Andrei Vagin <avagin@gmail.com>

[ Upstream commit c34c1287778b080ed692c0a46a8e345206cc29e6 ]

IPPROTO_RAW isn't registred as an inet protocol, so
inet_protos[protocol] is always NULL for it.

Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Fixes: bf2ae2e4bf93 ("sock_diag: request _diag module only when the family or proto has been registered")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/sock.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/core/sock.c b/net/core/sock.c
index 6c11078217769..ba4f843cdd1d1 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -3347,6 +3347,7 @@ int sock_load_diag_module(int family, int protocol)
 
 #ifdef CONFIG_INET
 	if (family == AF_INET &&
+	    protocol != IPPROTO_RAW &&
 	    !rcu_access_pointer(inet_protos[protocol]))
 		return -ENOENT;
 #endif
-- 
2.20.1

[PATCH AUTOSEL 4.19 192/237] net: bpfilter: fix iptables failure if bpfilter_umh is disabled

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 97adaddaa6db7a8af81b9b11e30cbe3628cd6700 ]

When iptables command is executed, ip_{set/get}sockopt() try to upload
bpfilter.ko if bpfilter is enabled. if it couldn't find bpfilter.ko,
command is failed.
bpfilter.ko is generated if CONFIG_BPFILTER_UMH is enabled.
ip_{set/get}sockopt() only checks CONFIG_BPFILTER.
So that if CONFIG_BPFILTER is enabled and CONFIG_BPFILTER_UMH is disabled,
iptables command is always failed.

test config:
   CONFIG_BPFILTER=y
   # CONFIG_BPFILTER_UMH is not set

test command:
   %iptables -L
   iptables: No chain/target/match by that name.

Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_sockglue.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index b7a26120d5521..82f341e84faec 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -1244,7 +1244,7 @@ int ip_setsockopt(struct sock *sk, int level,
 		return -ENOPROTOOPT;
 
 	err = do_ip_setsockopt(sk, level, optname, optval, optlen);
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
 	if (optname >= BPFILTER_IPT_SO_SET_REPLACE &&
 	    optname < BPFILTER_IPT_SET_MAX)
 		err = bpfilter_ip_set_sockopt(sk, optname, optval, optlen);
@@ -1557,7 +1557,7 @@ int ip_getsockopt(struct sock *sk, int level,
 	int err;
 
 	err = do_ip_getsockopt(sk, level, optname, optval, optlen, 0);
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
 	if (optname >= BPFILTER_IPT_SO_GET_INFO &&
 	    optname < BPFILTER_IPT_GET_MAX)
 		err = bpfilter_ip_get_sockopt(sk, optname, optval, optlen);
@@ -1594,7 +1594,7 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname,
 	err = do_ip_getsockopt(sk, level, optname, optval, optlen,
 		MSG_CMSG_COMPAT);
 
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
 	if (optname >= BPFILTER_IPT_SO_GET_INFO &&
 	    optname < BPFILTER_IPT_GET_MAX)
 		err = bpfilter_ip_get_sockopt(sk, optname, optval, optlen);
-- 
2.20.1

[PATCH AUTOSEL 4.19 196/237] wil6210: fix debugfs memory access alignment

[Sasha Levin]

From: Ahmad Masri <amasri@codeaurora.org>

[ Upstream commit 84ec040d0fb25197584d28a0dedc355503cd19b9 ]

All wil6210 device memory access should be 4 bytes aligned. In io
blob wil6210 did not force alignment for read function, this caused
alignment fault on some platforms.
Fixing that by accessing all 4 lower bytes and return to host the
requested data.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/debugfs.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 51c3330bc316f..12b8cb698f64d 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -662,10 +662,10 @@ static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf,
 	enum { max_count = 4096 };
 	struct wil_blob_wrapper *wil_blob = file->private_data;
 	struct wil6210_priv *wil = wil_blob->wil;
-	loff_t pos = *ppos;
+	loff_t aligned_pos, pos = *ppos;
 	size_t available = wil_blob->blob.size;
 	void *buf;
-	size_t ret;
+	size_t unaligned_bytes, aligned_count, ret;
 	int rc;
 
 	if (test_bit(wil_status_suspending, wil_blob->wil->status) ||
@@ -683,7 +683,12 @@ static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf,
 	if (count > max_count)
 		count = max_count;
 
-	buf = kmalloc(count, GFP_KERNEL);
+	/* set pos to 4 bytes aligned */
+	unaligned_bytes = pos % 4;
+	aligned_pos = pos - unaligned_bytes;
+	aligned_count = count + unaligned_bytes;
+
+	buf = kmalloc(aligned_count, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
@@ -694,9 +699,9 @@ static ssize_t wil_read_file_ioblob(struct file *file, char __user *user_buf,
 	}
 
 	wil_memcpy_fromio_32(buf, (const void __iomem *)
-			     wil_blob->blob.data + pos, count);
+			     wil_blob->blob.data + aligned_pos, aligned_count);
 
-	ret = copy_to_user(user_buf, buf, count);
+	ret = copy_to_user(user_buf, buf + unaligned_bytes, count);
 
 	wil_pm_runtime_put(wil);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 197/237] wil6210: fix L2 RX status handling

[Sasha Levin]

From: Maya Erez <merez@codeaurora.org>

[ Upstream commit 04de15010aa42a92add66b159e3ae44b4287390f ]

L2 RX status errors should not be treated as a bitmap and the actual
error values should be checked.
Print L2 errors as wil_err_ratelimited for easier debugging
when such errors occurs.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/txrx_edma.c | 23 ++++++++++----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.c b/drivers/net/wireless/ath/wil6210/txrx_edma.c
index 409a6fa8b6c8f..5fa8d6ad66482 100644
--- a/drivers/net/wireless/ath/wil6210/txrx_edma.c
+++ b/drivers/net/wireless/ath/wil6210/txrx_edma.c
@@ -808,23 +808,24 @@ static int wil_rx_error_check_edma(struct wil6210_priv *wil,
 		wil_dbg_txrx(wil, "L2 RX error, l2_rx_status=0x%x\n",
 			     l2_rx_status);
 		/* Due to HW issue, KEY error will trigger a MIC error */
-		if (l2_rx_status & WIL_RX_EDMA_ERROR_MIC) {
-			wil_dbg_txrx(wil,
-				     "L2 MIC/KEY error, dropping packet\n");
+		if (l2_rx_status == WIL_RX_EDMA_ERROR_MIC) {
+			wil_err_ratelimited(wil,
+					    "L2 MIC/KEY error, dropping packet\n");
 			stats->rx_mic_error++;
 		}
-		if (l2_rx_status & WIL_RX_EDMA_ERROR_KEY) {
-			wil_dbg_txrx(wil, "L2 KEY error, dropping packet\n");
+		if (l2_rx_status == WIL_RX_EDMA_ERROR_KEY) {
+			wil_err_ratelimited(wil,
+					    "L2 KEY error, dropping packet\n");
 			stats->rx_key_error++;
 		}
-		if (l2_rx_status & WIL_RX_EDMA_ERROR_REPLAY) {
-			wil_dbg_txrx(wil,
-				     "L2 REPLAY error, dropping packet\n");
+		if (l2_rx_status == WIL_RX_EDMA_ERROR_REPLAY) {
+			wil_err_ratelimited(wil,
+					    "L2 REPLAY error, dropping packet\n");
 			stats->rx_replay++;
 		}
-		if (l2_rx_status & WIL_RX_EDMA_ERROR_AMSDU) {
-			wil_dbg_txrx(wil,
-				     "L2 AMSDU error, dropping packet\n");
+		if (l2_rx_status == WIL_RX_EDMA_ERROR_AMSDU) {
+			wil_err_ratelimited(wil,
+					    "L2 AMSDU error, dropping packet\n");
 			stats->rx_amsdu_error++;
 		}
 		return -EFAULT;
-- 
2.20.1

[PATCH AUTOSEL 4.19 198/237] wil6210: fix RGF_CAF_ICR address for Talyn-MB

[Sasha Levin]

From: Maya Erez <merez@codeaurora.org>

[ Upstream commit 7c69709f8ed27197b16aa1c3f9b0744402b2fa02 ]

RGF_CAF_ICR register location has changed in Talyn-MB.
Add RGF_CAF_ICR_TALYN_MB to support the new address.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/main.c    | 11 +++++++++--
 drivers/net/wireless/ath/wil6210/wil6210.h |  1 +
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index a0fe8cbad104f..aeed45f127ad6 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1396,8 +1396,15 @@ static void wil_pre_fw_config(struct wil6210_priv *wil)
 	wil6210_clear_irq(wil);
 	/* CAF_ICR - clear and mask */
 	/* it is W1C, clear by writing back same value */
-	wil_s(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0);
-	wil_w(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0);
+	if (wil->hw_version < HW_VER_TALYN_MB) {
+		wil_s(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0);
+		wil_w(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0);
+	} else {
+		wil_s(wil,
+		      RGF_CAF_ICR_TALYN_MB + offsetof(struct RGF_ICR, ICR), 0);
+		wil_w(wil, RGF_CAF_ICR_TALYN_MB +
+		      offsetof(struct RGF_ICR, IMV), ~0);
+	}
 	/* clear PAL_UNIT_ICR (potential D0->D3 leftover)
 	 * In Talyn-MB host cannot access this register due to
 	 * access control, hence PAL_UNIT_ICR is cleared by the FW
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 17c294b1ead13..75fe1a3b70466 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -319,6 +319,7 @@ struct RGF_ICR {
 /* MAC timer, usec, for packet lifetime */
 #define RGF_MAC_MTRL_COUNTER_0		(0x886aa8)
 
+#define RGF_CAF_ICR_TALYN_MB		(0x8893d4) /* struct RGF_ICR */
 #define RGF_CAF_ICR			(0x88946c) /* struct RGF_ICR */
 #define RGF_CAF_OSC_CONTROL		(0x88afa4)
 	#define BIT_CAF_OSC_XTAL_EN		BIT(0)
-- 
2.20.1

[PATCH AUTOSEL 4.19 199/237] wil6210: fix locking in wmi_call

[Sasha Levin]

From: Lior David <liord@codeaurora.org>

[ Upstream commit dc57731dbd535880fe6ced31c229262c34df7d64 ]

Switch from spin_lock to spin_lock_irqsave, because
wmi_ev_lock is used inside interrupt handler.

Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/wmi.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 2010f771478df..8a603432f5317 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -1639,16 +1639,17 @@ int wmi_call(struct wil6210_priv *wil, u16 cmdid, u8 mid, void *buf, u16 len,
 {
 	int rc;
 	unsigned long remain;
+	ulong flags;
 
 	mutex_lock(&wil->wmi_mutex);
 
-	spin_lock(&wil->wmi_ev_lock);
+	spin_lock_irqsave(&wil->wmi_ev_lock, flags);
 	wil->reply_id = reply_id;
 	wil->reply_mid = mid;
 	wil->reply_buf = reply;
 	wil->reply_size = reply_size;
 	reinit_completion(&wil->wmi_call);
-	spin_unlock(&wil->wmi_ev_lock);
+	spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
 
 	rc = __wmi_send(wil, cmdid, mid, buf, len);
 	if (rc)
@@ -1668,12 +1669,12 @@ int wmi_call(struct wil6210_priv *wil, u16 cmdid, u8 mid, void *buf, u16 len,
 	}
 
 out:
-	spin_lock(&wil->wmi_ev_lock);
+	spin_lock_irqsave(&wil->wmi_ev_lock, flags);
 	wil->reply_id = 0;
 	wil->reply_mid = U8_MAX;
 	wil->reply_buf = NULL;
 	wil->reply_size = 0;
-	spin_unlock(&wil->wmi_ev_lock);
+	spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
 
 	mutex_unlock(&wil->wmi_mutex);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 200/237] ath10k: snoc: fix unbalanced clock error handling

[Sasha Levin]

From: Brian Norris <briannorris@chromium.org>

[ Upstream commit 82e60d920e8ad70cd9a280ab156566755f1fe4aa ]

Similar to regulator error handling, we should only start tearing down
the 'i - 1' clock when clock 'i' fails to enable. Otherwise, we might
end up with an unbalanced clock, where we never successfully enabled the
clock, but we try to disable it anyway.

Fixes: a6a793f98786 ("ath10k: vote for hardware resources for WCN3990")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/snoc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index fa1843a7e0fda..e2d78f77edb70 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1190,7 +1190,7 @@ static int ath10k_wcn3990_clk_init(struct ath10k *ar)
 	return 0;
 
 err_clock_config:
-	for (; i >= 0; i--) {
+	for (i = i - 1; i >= 0; i--) {
 		clk_info = &ar_snoc->clk[i];
 
 		if (!clk_info->handle)
-- 
2.20.1

[PATCH AUTOSEL 4.19 201/237] wlcore: Fix the return value in case of error in 'wlcore_vendor_cmd_smart_config_start()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 3419348a97bcc256238101129d69b600ceb5cc70 ]

We return 0 unconditionally at the end of
'wlcore_vendor_cmd_smart_config_start()'.
However, 'ret' is set to some error codes in several error handling paths
and we already return some error codes at the beginning of the function.

Return 'ret' instead to propagate the error code.

Fixes: 80ff8063e87c ("wlcore: handle smart config vendor commands")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wlcore/vendor_cmd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ti/wlcore/vendor_cmd.c b/drivers/net/wireless/ti/wlcore/vendor_cmd.c
index dbe78d8491eff..7f34ec077ee57 100644
--- a/drivers/net/wireless/ti/wlcore/vendor_cmd.c
+++ b/drivers/net/wireless/ti/wlcore/vendor_cmd.c
@@ -70,7 +70,7 @@ wlcore_vendor_cmd_smart_config_start(struct wiphy *wiphy,
 out:
 	mutex_unlock(&wl->mutex);
 
-	return 0;
+	return ret;
 }
 
 static int
-- 
2.20.1

[PATCH AUTOSEL 4.19 202/237] rtl8xxxu: Fix missing break in switch

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit 307b00c5e695857ca92fc6a4b8ab6c48f988a1b1 ]

Add missing break statement in order to prevent the code from falling
through to the default case.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 505ab1b055ff4..2b4fcdf4ec5bb 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5691,6 +5691,7 @@ static int rtl8xxxu_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
 		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		break;
 	default:
 		return -EOPNOTSUPP;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 203/237] brcmsmac: never log "tid x is not agg'able" by default

[Sasha Levin]

From: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>

[ Upstream commit 96fca788e5788b7ea3b0050eb35a343637e0a465 ]

This message greatly spams the log under heavy Tx of frames with BK access
class which is especially true when operating as AP. It is also not informative
as the "agg'ablity" of TIDs are set once and never change.
Fix this by logging only in debug mode.

Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c    | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index 23118207b661e..9657b992f90e1 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -846,8 +846,8 @@ brcms_ops_ampdu_action(struct ieee80211_hw *hw,
 		status = brcms_c_aggregatable(wl->wlc, tid);
 		spin_unlock_bh(&wl->lock);
 		if (!status) {
-			brcms_err(wl->wlc->hw->d11core,
-				  "START: tid %d is not agg\'able\n", tid);
+			brcms_dbg_ht(wl->wlc->hw->d11core,
+				     "START: tid %d is not agg\'able\n", tid);
 			return -EINVAL;
 		}
 		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
-- 
2.20.1

[PATCH AUTOSEL 4.19 204/237] wireless: airo: potential buffer overflow in sprintf()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 3d39e1bb1c88f32820c5f9271f2c8c2fb9a52bac ]

It looks like we wanted to print a maximum of BSSList_rid.ssidLen bytes
of the ssid, but we accidentally use "%*s" (width) instead of "%.*s"
(precision) so if the ssid doesn't have a NUL terminator this could lead
to an overflow.

Static analysis.  Not tested.

Fixes: e174961ca1a0 ("net: convert print_mac to %pM")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/cisco/airo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/cisco/airo.c b/drivers/net/wireless/cisco/airo.c
index 04dd7a9365938..5512c7f73fce8 100644
--- a/drivers/net/wireless/cisco/airo.c
+++ b/drivers/net/wireless/cisco/airo.c
@@ -5462,7 +5462,7 @@ static int proc_BSSList_open( struct inode *inode, struct file *file ) {
            we have to add a spin lock... */
 	rc = readBSSListRid(ai, doLoseSync, &BSSList_rid);
 	while(rc == 0 && BSSList_rid.index != cpu_to_le16(0xffff)) {
-		ptr += sprintf(ptr, "%pM %*s rssi = %d",
+		ptr += sprintf(ptr, "%pM %.*s rssi = %d",
 			       BSSList_rid.bssid,
 				(int)BSSList_rid.ssidLen,
 				BSSList_rid.ssid,
-- 
2.20.1

[PATCH AUTOSEL 4.19 205/237] rtlwifi: rtl8192de: Fix misleading REG_MCUFWDL information

[Sasha Levin]

From: Shaokun Zhang <zhangshaokun@hisilicon.com>

[ Upstream commit 7d129adff3afbd3a449bc3593f2064ac546d58d3 ]

RT_TRACE shows REG_MCUFWDL value as a decimal value with a '0x'
prefix, which is somewhat misleading.

Fix it to print hexadecimal, as was intended.

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
index 85cedd083d2b8..75bfa9dfef4aa 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
@@ -173,7 +173,7 @@ static int _rtl92d_fw_init(struct ieee80211_hw *hw)
 			 rtl_read_byte(rtlpriv, FW_MAC1_READY));
 	}
 	RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
-		 "Polling FW ready fail!! REG_MCUFWDL:0x%08ul\n",
+		 "Polling FW ready fail!! REG_MCUFWDL:0x%08x\n",
 		 rtl_read_dword(rtlpriv, REG_MCUFWDL));
 	return -1;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 206/237] net: dsa: bcm_sf2: Turn on PHY to allow successful registration

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit c04a17d2a9ccf1eaba1c5a56f83e997540a70556 ]

We are binding to the PHY using the SF2 slave MDIO bus that we create,
binding involves reading the PHY's MII_PHYSID1/2 which won't be possible
if the PHY is turned off. Temporarily turn it on/off for the bus probing
to succeeed. This fixes unbind/bind problems where the port connecting
to that PHY would be in error since it could not connect to it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/bcm_sf2.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index ca3655d28e00f..17cec68e56b4f 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -1099,12 +1099,16 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	bcm_sf2_gphy_enable_set(priv->dev->ds, true);
+
 	ret = bcm_sf2_mdio_register(ds);
 	if (ret) {
 		pr_err("failed to register MDIO bus\n");
 		return ret;
 	}
 
+	bcm_sf2_gphy_enable_set(priv->dev->ds, false);
+
 	ret = bcm_sf2_cfp_rst(priv);
 	if (ret) {
 		pr_err("failed to reset CFP\n");
-- 
2.20.1

[PATCH AUTOSEL 4.19 218/237] vrf: mark skb for multicast or link-local as enslaved to VRF

[Sasha Levin]

From: Mike Manning <mmanning@vyatta.att-mail.com>

[ Upstream commit 6f12fa775530195a501fb090d092c637f32d0cc5 ]

The skb for packets that are multicast or to a link-local address are
not marked as being enslaved to a VRF, if they are received on a socket
bound to the VRF. This is needed for ND and it is preferable for the
kernel not to have to deal with the additional use-cases if ll or mcast
packets are handled as enslaved. However, this does not allow service
instances listening on unbound and bound to VRF sockets to distinguish
the VRF used, if packets are sent as multicast or to a link-local
address. The fix is for the VRF driver to also mark these skb as being
enslaved to the VRF.

Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vrf.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c
index 9f895083bc0aa..7f5ee6bb44300 100644
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -993,24 +993,23 @@ static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
 				   struct sk_buff *skb)
 {
 	int orig_iif = skb->skb_iif;
-	bool need_strict;
+	bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
+	bool is_ndisc = ipv6_ndisc_frame(skb);
 
-	/* loopback traffic; do not push through packet taps again.
-	 * Reset pkt_type for upper layers to process skb
+	/* loopback, multicast & non-ND link-local traffic; do not push through
+	 * packet taps again. Reset pkt_type for upper layers to process skb
 	 */
-	if (skb->pkt_type == PACKET_LOOPBACK) {
+	if (skb->pkt_type == PACKET_LOOPBACK || (need_strict && !is_ndisc)) {
 		skb->dev = vrf_dev;
 		skb->skb_iif = vrf_dev->ifindex;
 		IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
-		skb->pkt_type = PACKET_HOST;
+		if (skb->pkt_type == PACKET_LOOPBACK)
+			skb->pkt_type = PACKET_HOST;
 		goto out;
 	}
 
-	/* if packet is NDISC or addressed to multicast or link-local
-	 * then keep the ingress interface
-	 */
-	need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
-	if (!ipv6_ndisc_frame(skb) && !need_strict) {
+	/* if packet is NDISC then keep the ingress interface */
+	if (!is_ndisc) {
 		vrf_rx_stats(vrf_dev, skb->len);
 		skb->dev = vrf_dev;
 		skb->skb_iif = vrf_dev->ifindex;
-- 
2.20.1

[PATCH AUTOSEL 4.19 221/237] net: bcmgenet: return correct value 'ret' from bcmgenet_power_down

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 0db55093b56618088b9a1d445eb6e43b311bea33 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/broadcom/genet/bcmgenet.c: In function 'bcmgenet_power_down':
drivers/net/ethernet/broadcom/genet/bcmgenet.c:1136:6: warning:
 variable 'ret' set but not used [-Wunused-but-set-variable]

bcmgenet_power_down should return 'ret' instead of 0.

Fixes: ca8cf341903f ("net: bcmgenet: propagate errors from bcmgenet_power_down")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index bb60104b4f805..338d223804343 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1169,7 +1169,7 @@ static int bcmgenet_power_down(struct bcmgenet_priv *priv,
 		break;
 	}
 
-	return 0;
+	return ret;
 }
 
 static void bcmgenet_power_up(struct bcmgenet_priv *priv,
-- 
2.20.1

[PATCH AUTOSEL 4.19 222/237] sock: Reset dst when changing sk_mark via setsockopt

[Sasha Levin]

From: David Barmann <david.barmann@stackpath.com>

[ Upstream commit 50254256f382c56bde87d970f3d0d02fdb76ec70 ]

When setting the SO_MARK socket option, if the mark changes, the dst
needs to be reset so that a new route lookup is performed.

This fixes the case where an application wants to change routing by
setting a new sk_mark.  If this is done after some packets have already
been sent, the dst is cached and has no effect.

Signed-off-by: David Barmann <david.barmann@stackpath.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/sock.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/core/sock.c b/net/core/sock.c
index ba4f843cdd1d1..948fd687292a6 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -951,10 +951,12 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
 			clear_bit(SOCK_PASSSEC, &sock->flags);
 		break;
 	case SO_MARK:
-		if (!ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN))
+		if (!ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN)) {
 			ret = -EPERM;
-		else
+		} else if (val != sk->sk_mark) {
 			sk->sk_mark = val;
+			sk_dst_reset(sk);
+		}
 		break;
 
 	case SO_RXQ_OVFL:
-- 
2.20.1

[PATCH AUTOSEL 4.19 225/237] tools: bpftool: pass an argument to silence open_obj_pinned()

[Sasha Levin]

From: Quentin Monnet <quentin.monnet@netronome.com>

[ Upstream commit f120919f9905a2cad9dea792a28a11fb623f72c1 ]

Function open_obj_pinned() prints error messages when it fails to open a
link in the BPF virtual file system. However, in some occasions it is
not desirable to print an error, for example when we parse all links
under the bpffs root, and the error is due to some paths actually being
symbolic links.

Example output:

    # ls -l /sys/fs/bpf/
    lrwxrwxrwx 1 root root 0 Oct 18 19:00 ip -> /sys/fs/bpf/tc/
    drwx------ 3 root root 0 Oct 18 19:00 tc
    lrwxrwxrwx 1 root root 0 Oct 18 19:00 xdp -> /sys/fs/bpf/tc/

    # bpftool --bpffs prog show
    Error: bpf obj get (/sys/fs/bpf): Permission denied
    Error: bpf obj get (/sys/fs/bpf): Permission denied

    # strace -e bpf bpftool --bpffs prog show
    bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/ip", bpf_fd=0}, 72) = -1 EACCES (Permission denied)
    Error: bpf obj get (/sys/fs/bpf): Permission denied
    bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/xdp", bpf_fd=0}, 72) = -1 EACCES (Permission denied)
    Error: bpf obj get (/sys/fs/bpf): Permission denied
    ...

To fix it, pass a bool as a second argument to the function, and prevent
it from printing an error when the argument is set to true.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/common.c | 15 ++++++++-------
 tools/bpf/bpftool/main.h   |  2 +-
 2 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c
index be7aebff0c1e5..158469f57461d 100644
--- a/tools/bpf/bpftool/common.c
+++ b/tools/bpf/bpftool/common.c
@@ -130,16 +130,17 @@ static int mnt_bpffs(const char *target, char *buff, size_t bufflen)
 	return 0;
 }
 
-int open_obj_pinned(char *path)
+int open_obj_pinned(char *path, bool quiet)
 {
 	int fd;
 
 	fd = bpf_obj_get(path);
 	if (fd < 0) {
-		p_err("bpf obj get (%s): %s", path,
-		      errno == EACCES && !is_bpffs(dirname(path)) ?
-		    "directory not in bpf file system (bpffs)" :
-		    strerror(errno));
+		if (!quiet)
+			p_err("bpf obj get (%s): %s", path,
+			      errno == EACCES && !is_bpffs(dirname(path)) ?
+			    "directory not in bpf file system (bpffs)" :
+			    strerror(errno));
 		return -1;
 	}
 
@@ -151,7 +152,7 @@ int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type)
 	enum bpf_obj_type type;
 	int fd;
 
-	fd = open_obj_pinned(path);
+	fd = open_obj_pinned(path, false);
 	if (fd < 0)
 		return -1;
 
@@ -384,7 +385,7 @@ int build_pinned_obj_table(struct pinned_obj_table *tab,
 		while ((ftse = fts_read(fts))) {
 			if (!(ftse->fts_info & FTS_F))
 				continue;
-			fd = open_obj_pinned(ftse->fts_path);
+			fd = open_obj_pinned(ftse->fts_path, true);
 			if (fd < 0)
 				continue;
 
diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h
index 238e734d75b3e..057a227bdb9f9 100644
--- a/tools/bpf/bpftool/main.h
+++ b/tools/bpf/bpftool/main.h
@@ -126,7 +126,7 @@ int cmd_select(const struct cmd *cmds, int argc, char **argv,
 int get_fd_type(int fd);
 const char *get_fd_type_name(enum bpf_obj_type type);
 char *get_fdinfo(int fd, const char *key);
-int open_obj_pinned(char *path);
+int open_obj_pinned(char *path, bool quiet);
 int open_obj_pinned_any(char *path, enum bpf_obj_type exp_type);
 int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32));
 int do_pin_fd(int fd, const char *name);
-- 
2.20.1

[PATCH AUTOSEL 4.19 226/237] cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces

[Sasha Levin]

From: Sriram R <srirrama@codeaurora.org>

[ Upstream commit 113f3aaa81bd56aba02659786ed65cbd9cb9a6fc ]

Currently when an AP and STA interfaces are active in the same or different
radios, regulatory settings are restored whenever the STA disconnects. This
restores all channel information including dfs states in all radios.
For example, if an AP interface is active in one radio and STA in another,
when radar is detected on the AP interface, the dfs state of the channel
will be changed to UNAVAILABLE. But when the STA interface disconnects,
this issues a regulatory disconnect hint which restores all regulatory
settings in all the radios attached and thereby losing the stored dfs
state on the other radio where the channel was marked as unavailable
earlier. Hence prevent such regulatory restore whenever another active
beaconing interface is present in the same or other radios.

Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/sme.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index d536b07582f8c..c7047c7b4e80f 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -642,11 +642,15 @@ static bool cfg80211_is_all_idle(void)
 	 * All devices must be idle as otherwise if you are actively
 	 * scanning some new beacon hints could be learned and would
 	 * count as new regulatory hints.
+	 * Also if there is any other active beaconing interface we
+	 * need not issue a disconnect hint and reset any info such
+	 * as chan dfs state, etc.
 	 */
 	list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
 		list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
 			wdev_lock(wdev);
-			if (wdev->conn || wdev->current_bss)
+			if (wdev->conn || wdev->current_bss ||
+			    cfg80211_beaconing_iface_active(wdev))
 				is_all_idle = false;
 			wdev_unlock(wdev);
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.19 236/237] ipv6: Fix handling of LLA with VRF and sockets bound to VRF

[Sasha Levin]

From: David Ahern <dsahern@gmail.com>

[ Upstream commit c2027d1e17582903e368abf5d4838b22a98f2b7b ]

A recent commit allows sockets bound to a VRF to receive ipv6 link local
packets. However, it only works for UDP and worse TCP connection attempts
to the LLA with the only listener bound to the VRF just hang where as
before the client gets a reset and connection refused. Fix by adjusting
ir_iif for LL addresses and packets received through a device enslaved
to a VRF.

Fixes: 6f12fa775530 ("vrf: mark skb for multicast or link-local as enslaved to VRF")
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Cc: Mike Manning <mmanning@vyatta.att-mail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/tcp_ipv6.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index e7cdfa92c3820..9a117a79af659 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -734,6 +734,7 @@ static void tcp_v6_init_req(struct request_sock *req,
 			    const struct sock *sk_listener,
 			    struct sk_buff *skb)
 {
+	bool l3_slave = ipv6_l3mdev_skb(TCP_SKB_CB(skb)->header.h6.flags);
 	struct inet_request_sock *ireq = inet_rsk(req);
 	const struct ipv6_pinfo *np = inet6_sk(sk_listener);
 
@@ -741,7 +742,7 @@ static void tcp_v6_init_req(struct request_sock *req,
 	ireq->ir_v6_loc_addr = ipv6_hdr(skb)->daddr;
 
 	/* So that link locals have meaning */
-	if (!sk_listener->sk_bound_dev_if &&
+	if ((!sk_listener->sk_bound_dev_if || l3_slave) &&
 	    ipv6_addr_type(&ireq->ir_v6_rmt_addr) & IPV6_ADDR_LINKLOCAL)
 		ireq->ir_iif = tcp_v6_iif(skb);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 237/237] cfg80211: call disconnect_wk when AP stops

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit e005bd7ddea06784c1eb91ac5bb6b171a94f3b05 ]

Since we now prevent regulatory restore during STA disconnect
if concurrent AP interfaces are active, we need to reschedule
this check when the AP state changes. This fixes never doing
a restore when an AP is the last interface to stop. Or to put
it another way: we need to re-check after anything we check
here changes.

Cc: stable@vger.kernel.org
Fixes: 113f3aaa81bd ("cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/ap.c   | 2 ++
 net/wireless/core.h | 2 ++
 net/wireless/sme.c  | 2 +-
 3 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/wireless/ap.c b/net/wireless/ap.c
index 882d97bdc6bfd..550ac9d827fe7 100644
--- a/net/wireless/ap.c
+++ b/net/wireless/ap.c
@@ -41,6 +41,8 @@ int __cfg80211_stop_ap(struct cfg80211_registered_device *rdev,
 		cfg80211_sched_dfs_chan_update(rdev);
 	}
 
+	schedule_work(&cfg80211_disconnect_work);
+
 	return err;
 }
 
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 7f52ef5693203..f5d58652108dd 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -430,6 +430,8 @@ void cfg80211_process_wdev_events(struct wireless_dev *wdev);
 bool cfg80211_does_bw_fit_range(const struct ieee80211_freq_range *freq_range,
 				u32 center_freq_khz, u32 bw_khz);
 
+extern struct work_struct cfg80211_disconnect_work;
+
 /**
  * cfg80211_chandef_dfs_usable - checks if chandef is DFS usable
  * @wiphy: the wiphy to validate against
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index c7047c7b4e80f..07c2196e9d573 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -667,7 +667,7 @@ static void disconnect_work(struct work_struct *work)
 	rtnl_unlock();
 }
 
-static DECLARE_WORK(cfg80211_disconnect_work, disconnect_work);
+DECLARE_WORK(cfg80211_disconnect_work, disconnect_work);
 
 
 /*
-- 
2.20.1