[PATCH AUTOSEL 4.9 07/99] brcmsmac: AP mode: update beacon when TIM changes

[PATCH AUTOSEL 4.9 07/99] brcmsmac: AP mode: update beacon when TIM changes

[Sasha Levin]

From: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>

[ Upstream commit 2258ee58baa554609a3cc3996276e4276f537b6d ]

Beacons are not updated to reflect TIM changes. This is not compliant with
power-saving client stations as the beacons do not have valid TIM and can
cause the network to stall at random occasions and to have highly variable
latencies.
Fix it by updating beacon templates on mac80211 set_tim callback.

Addresses an issue described in:
https://marc.info/?i=20180911163534.21312d08%20()%20manjaro

Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../broadcom/brcm80211/brcmsmac/mac80211_if.c | 26 +++++++++++++++++++
 .../broadcom/brcm80211/brcmsmac/main.h        |  1 +
 2 files changed, 27 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index 7c2a9a9bc372c..a620b2f6c7c4c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -502,6 +502,7 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	}
 
 	spin_lock_bh(&wl->lock);
+	wl->wlc->vif = vif;
 	wl->mute_tx = false;
 	brcms_c_mute(wl->wlc, false);
 	if (vif->type == NL80211_IFTYPE_STATION)
@@ -519,6 +520,11 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 static void
 brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
+	struct brcms_info *wl = hw->priv;
+
+	spin_lock_bh(&wl->lock);
+	wl->wlc->vif = NULL;
+	spin_unlock_bh(&wl->lock);
 }
 
 static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
@@ -937,6 +943,25 @@ static void brcms_ops_set_tsf(struct ieee80211_hw *hw,
 	spin_unlock_bh(&wl->lock);
 }
 
+static int brcms_ops_beacon_set_tim(struct ieee80211_hw *hw,
+				 struct ieee80211_sta *sta, bool set)
+{
+	struct brcms_info *wl = hw->priv;
+	struct sk_buff *beacon = NULL;
+	u16 tim_offset = 0;
+
+	spin_lock_bh(&wl->lock);
+	if (wl->wlc->vif)
+		beacon = ieee80211_beacon_get_tim(hw, wl->wlc->vif,
+						  &tim_offset, NULL);
+	if (beacon)
+		brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
+				       wl->wlc->vif->bss_conf.dtim_period);
+	spin_unlock_bh(&wl->lock);
+
+	return 0;
+}
+
 static const struct ieee80211_ops brcms_ops = {
 	.tx = brcms_ops_tx,
 	.start = brcms_ops_start,
@@ -955,6 +980,7 @@ static const struct ieee80211_ops brcms_ops = {
 	.flush = brcms_ops_flush,
 	.get_tsf = brcms_ops_get_tsf,
 	.set_tsf = brcms_ops_set_tsf,
+	.set_tim = brcms_ops_beacon_set_tim,
 };
 
 void brcms_dpc(unsigned long data)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
index c4d135cff04ad..9f76b880814e8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
@@ -563,6 +563,7 @@ struct brcms_c_info {
 
 	struct wiphy *wiphy;
 	struct scb pri_scb;
+	struct ieee80211_vif *vif;
 
 	struct sk_buff *beacon;
 	u16 beacon_tim_offset;
-- 
2.20.1

[PATCH AUTOSEL 4.9 08/99] ath10k: allocate small size dma memory in ath10k_pci_diag_write_mem

[Sasha Levin]

From: Carl Huang <cjhuang@codeaurora.org>

[ Upstream commit 0738b4998c6d1caf9ca2447b946709a7278c70f1 ]

ath10k_pci_diag_write_mem may allocate big size of the dma memory
based on the parameter nbytes. Take firmware diag download as
example, the biggest size is about 500K. In some systems, the
allocation is likely to fail because it can't acquire such a large
contiguous dma memory.

The fix is to allocate a small size dma memory. In the loop,
driver copies the data to the allocated dma memory and writes to
the destination until all the data is written.

Tested with QCA6174 PCI with
firmware-6.bin_WLAN.RM.4.4.1-00119-QCARMSWP-1, this also affects
QCA9377 PCI.

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chomium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/pci.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 25b8d501d437e..176cf4fef6296 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1039,10 +1039,9 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret = 0;
 	u32 *buf;
-	unsigned int completed_nbytes, orig_nbytes, remaining_bytes;
+	unsigned int completed_nbytes, alloc_nbytes, remaining_bytes;
 	struct ath10k_ce_pipe *ce_diag;
 	void *data_buf = NULL;
-	u32 ce_data;	/* Host buffer address in CE space */
 	dma_addr_t ce_data_base = 0;
 	int i;
 
@@ -1056,9 +1055,10 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 	 *   1) 4-byte alignment
 	 *   2) Buffer in DMA-able space
 	 */
-	orig_nbytes = nbytes;
+	alloc_nbytes = min_t(unsigned int, nbytes, DIAG_TRANSFER_LIMIT);
+
 	data_buf = (unsigned char *)dma_alloc_coherent(ar->dev,
-						       orig_nbytes,
+						       alloc_nbytes,
 						       &ce_data_base,
 						       GFP_ATOMIC);
 	if (!data_buf) {
@@ -1066,9 +1066,6 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 		goto done;
 	}
 
-	/* Copy caller's data to allocated DMA buf */
-	memcpy(data_buf, data, orig_nbytes);
-
 	/*
 	 * The address supplied by the caller is in the
 	 * Target CPU virtual address space.
@@ -1081,12 +1078,14 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 	 */
 	address = ath10k_pci_targ_cpu_to_ce_addr(ar, address);
 
-	remaining_bytes = orig_nbytes;
-	ce_data = ce_data_base;
+	remaining_bytes = nbytes;
 	while (remaining_bytes) {
 		/* FIXME: check cast */
 		nbytes = min_t(int, remaining_bytes, DIAG_TRANSFER_LIMIT);
 
+		/* Copy caller's data to allocated DMA buf */
+		memcpy(data_buf, data, nbytes);
+
 		/* Set up to receive directly into Target(!) address */
 		ret = __ath10k_ce_rx_post_buf(ce_diag, &address, address);
 		if (ret != 0)
@@ -1096,7 +1095,7 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 		 * Request CE to send caller-supplied data that
 		 * was copied to bounce buffer to Target(!) address.
 		 */
-		ret = ath10k_ce_send_nolock(ce_diag, NULL, (u32)ce_data,
+		ret = ath10k_ce_send_nolock(ce_diag, NULL, ce_data_base,
 					    nbytes, 0, 0);
 		if (ret != 0)
 			goto done;
@@ -1137,12 +1136,12 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 
 		remaining_bytes -= nbytes;
 		address += nbytes;
-		ce_data += nbytes;
+		data += nbytes;
 	}
 
 done:
 	if (data_buf) {
-		dma_free_coherent(ar->dev, orig_nbytes, data_buf,
+		dma_free_coherent(ar->dev, alloc_nbytes, data_buf,
 				  ce_data_base);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 25/99] net: fix warning in af_unix

[Sasha Levin]

From: Kyeongdon Kim <kyeongdon.kim@lge.com>

[ Upstream commit 33c4368ee2589c165aebd8d388cbd91e9adb9688 ]

This fixes the "'hash' may be used uninitialized in this function"

net/unix/af_unix.c:1041:20: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized]
  addr->hash = hash ^ sk->sk_type;

Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/unix/af_unix.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index cecf51a5aec4f..32ae82a5596d9 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -224,6 +224,8 @@ static inline void unix_release_addr(struct unix_address *addr)
 
 static int unix_mkname(struct sockaddr_un *sunaddr, int len, unsigned int *hashp)
 {
+	*hashp = 0;
+
 	if (len <= sizeof(short) || len > sizeof(*sunaddr))
 		return -EINVAL;
 	if (!sunaddr || sunaddr->sun_family != AF_UNIX)
-- 
2.20.1

[PATCH AUTOSEL 4.9 26/99] net: ena: Fix Kconfig dependency on X86

[Sasha Levin]

From: Netanel Belgazal <netanel@amazon.com>

[ Upstream commit 8c590f9776386b8f697fd0b7ed6142ae6e3de79e ]

The Kconfig limitation of X86 is to too wide.
The ENA driver only requires a little endian dependency.

Change the dependency to be on little endian CPU.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amazon/Kconfig b/drivers/net/ethernet/amazon/Kconfig
index 99b30353541ab..9e87d7b8360f5 100644
--- a/drivers/net/ethernet/amazon/Kconfig
+++ b/drivers/net/ethernet/amazon/Kconfig
@@ -17,7 +17,7 @@ if NET_VENDOR_AMAZON
 
 config ENA_ETHERNET
 	tristate "Elastic Network Adapter (ENA) support"
-	depends on (PCI_MSI && X86)
+	depends on PCI_MSI && !CPU_BIG_ENDIAN
 	---help---
 	  This driver supports Elastic Network Adapter (ENA)"
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 33/99] SUNRPC: Fix a compile warning for cmpxchg64()

[Sasha Levin]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit e732f4485a150492b286f3efc06f9b34dd6b9995 ]

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/gss_krb5_seal.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/sunrpc/auth_gss/gss_krb5_seal.c b/net/sunrpc/auth_gss/gss_krb5_seal.c
index 1d74d653e6c05..ad0dcb69395d7 100644
--- a/net/sunrpc/auth_gss/gss_krb5_seal.c
+++ b/net/sunrpc/auth_gss/gss_krb5_seal.c
@@ -63,6 +63,7 @@
 #include <linux/sunrpc/gss_krb5.h>
 #include <linux/random.h>
 #include <linux/crypto.h>
+#include <linux/atomic.h>
 
 #if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
 # define RPCDBG_FACILITY        RPCDBG_AUTH
-- 
2.20.1

[PATCH AUTOSEL 4.9 34/99] sunrpc: safely reallow resvport min/max inversion

[Sasha Levin]

From: "J. Bruce Fields" <bfields@redhat.com>

[ Upstream commit 826799e66e8683e5698e140bb9ef69afc8c0014e ]

Commits ffb6ca33b04b and e08ea3a96fc7 prevent setting xprt_min_resvport
greater than xprt_max_resvport, but may also break simple code that sets
one parameter then the other, if the new range does not overlap the old.

Also it looks racy to me, unless there's some serialization I'm not
seeing.  Granted it would probably require malicious privileged processes
(unless there's a chance these might eventually be settable in unprivileged
containers), but still it seems better not to let userspace panic the
kernel.

Simpler seems to be to allow setting the parameters to whatever you want
but interpret xprt_min_resvport > xprt_max_resvport as the empty range.

Fixes: ffb6ca33b04b "sunrpc: Prevent resvport min/max inversion..."
Fixes: e08ea3a96fc7 "sunrpc: Prevent rexvport min/max inversion..."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtsock.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 280fb31787084..f3f05148922a1 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -124,7 +124,7 @@ static struct ctl_table xs_tunables_table[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xprt_min_resvport_limit,
-		.extra2		= &xprt_max_resvport
+		.extra2		= &xprt_max_resvport_limit
 	},
 	{
 		.procname	= "max_resvport",
@@ -132,7 +132,7 @@ static struct ctl_table xs_tunables_table[] = {
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &xprt_min_resvport,
+		.extra1		= &xprt_min_resvport_limit,
 		.extra2		= &xprt_max_resvport_limit
 	},
 	{
@@ -1737,11 +1737,17 @@ static void xs_udp_timer(struct rpc_xprt *xprt, struct rpc_task *task)
 	xprt_adjust_cwnd(xprt, task, -ETIMEDOUT);
 }
 
-static unsigned short xs_get_random_port(void)
+static int xs_get_random_port(void)
 {
-	unsigned short range = xprt_max_resvport - xprt_min_resvport + 1;
-	unsigned short rand = (unsigned short) prandom_u32() % range;
-	return rand + xprt_min_resvport;
+	unsigned short min = xprt_min_resvport, max = xprt_max_resvport;
+	unsigned short range;
+	unsigned short rand;
+
+	if (max < min)
+		return -EADDRINUSE;
+	range = max - min + 1;
+	rand = (unsigned short) prandom_u32() % range;
+	return rand + min;
 }
 
 /**
@@ -1798,9 +1804,9 @@ static void xs_set_srcport(struct sock_xprt *transport, struct socket *sock)
 		transport->srcport = xs_sock_getport(sock);
 }
 
-static unsigned short xs_get_srcport(struct sock_xprt *transport)
+static int xs_get_srcport(struct sock_xprt *transport)
 {
-	unsigned short port = transport->srcport;
+	int port = transport->srcport;
 
 	if (port == 0 && transport->xprt.resvport)
 		port = xs_get_random_port();
@@ -1821,7 +1827,7 @@ static int xs_bind(struct sock_xprt *transport, struct socket *sock)
 {
 	struct sockaddr_storage myaddr;
 	int err, nloop = 0;
-	unsigned short port = xs_get_srcport(transport);
+	int port = xs_get_srcport(transport);
 	unsigned short last;
 
 	/*
@@ -1839,8 +1845,8 @@ static int xs_bind(struct sock_xprt *transport, struct socket *sock)
 	 * transport->xprt.resvport == 1) xs_get_srcport above will
 	 * ensure that port is non-zero and we will bind as needed.
 	 */
-	if (port == 0)
-		return 0;
+	if (port <= 0)
+		return port;
 
 	memcpy(&myaddr, &transport->srcaddr, transport->xprt.addrlen);
 	do {
@@ -3223,12 +3229,8 @@ static int param_set_uint_minmax(const char *val,
 
 static int param_set_portnr(const char *val, const struct kernel_param *kp)
 {
-	if (kp->arg == &xprt_min_resvport)
-		return param_set_uint_minmax(val, kp,
-			RPC_MIN_RESVPORT,
-			xprt_max_resvport);
 	return param_set_uint_minmax(val, kp,
-			xprt_min_resvport,
+			RPC_MIN_RESVPORT,
 			RPC_MAX_RESVPORT);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 35/99] atm: zatm: Fix empty body Clang warnings

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 64b9d16e2d02ca6e5dc8fcd30cfd52b0ecaaa8f4 ]

Clang warns:

drivers/atm/zatm.c:513:7: error: while loop has empty body
[-Werror,-Wempty-body]
        zwait;
             ^
drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to
silence this warning

Get rid of this warning by using an empty do-while loop. While we're at
it, add parentheses to make it clear that this is a function-like macro.

Link: https://github.com/ClangBuiltLinux/linux/issues/42
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/zatm.c | 42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index a0b88f1489905..e23e2672a1d6b 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -126,7 +126,7 @@ static unsigned long dummy[2] = {0,0};
 #define zin_n(r) inl(zatm_dev->base+r*4)
 #define zin(r) inl(zatm_dev->base+uPD98401_##r*4)
 #define zout(v,r) outl(v,zatm_dev->base+uPD98401_##r*4)
-#define zwait while (zin(CMR) & uPD98401_BUSY)
+#define zwait() do {} while (zin(CMR) & uPD98401_BUSY)
 
 /* RX0, RX1, TX0, TX1 */
 static const int mbx_entries[NR_MBX] = { 1024,1024,1024,1024 };
@@ -140,7 +140,7 @@ static const int mbx_esize[NR_MBX] = { 16,16,4,4 }; /* entry size in bytes */
 
 static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
 {
-	zwait;
+	zwait();
 	zout(value,CER);
 	zout(uPD98401_IND_ACC | uPD98401_IA_BALL |
 	    (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
@@ -149,10 +149,10 @@ static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
 
 static u32 zpeekl(struct zatm_dev *zatm_dev,u32 addr)
 {
-	zwait;
+	zwait();
 	zout(uPD98401_IND_ACC | uPD98401_IA_BALL | uPD98401_IA_RW |
 	  (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
-	zwait;
+	zwait();
 	return zin(CER);
 }
 
@@ -241,7 +241,7 @@ static void refill_pool(struct atm_dev *dev,int pool)
 	}
 	if (first) {
 		spin_lock_irqsave(&zatm_dev->lock, flags);
-		zwait;
+		zwait();
 		zout(virt_to_bus(first),CER);
 		zout(uPD98401_ADD_BAT | (pool << uPD98401_POOL_SHIFT) | count,
 		    CMR);
@@ -508,9 +508,9 @@ static int open_rx_first(struct atm_vcc *vcc)
 	}
 	if (zatm_vcc->pool < 0) return -EMSGSIZE;
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_OPEN_CHAN,CMR);
-	zwait;
+	zwait();
 	DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
 	chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -571,21 +571,21 @@ static void close_rx(struct atm_vcc *vcc)
 		pos = vcc->vci >> 1;
 		shift = (1-(vcc->vci & 1)) << 4;
 		zpokel(zatm_dev,zpeekl(zatm_dev,pos) & ~(0xffff << shift),pos);
-		zwait;
+		zwait();
 		zout(uPD98401_NOP,CMR);
-		zwait;
+		zwait();
 		zout(uPD98401_NOP,CMR);
 		spin_unlock_irqrestore(&zatm_dev->lock, flags);
 	}
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_DEACT_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	udelay(10); /* why oh why ... ? */
 	zout(uPD98401_CLOSE_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	if (!(zin(CMR) & uPD98401_CHAN_ADDR))
 		printk(KERN_CRIT DEV_LABEL "(itf %d): can't close RX channel "
 		    "%d\n",vcc->dev->number,zatm_vcc->rx_chan);
@@ -699,7 +699,7 @@ printk("NONONONOO!!!!\n");
 	skb_queue_tail(&zatm_vcc->tx_queue,skb);
 	DPRINTK("QRP=0x%08lx\n",zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+
 	  uPD98401_TXVC_QRP));
-	zwait;
+	zwait();
 	zout(uPD98401_TX_READY | (zatm_vcc->tx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -891,12 +891,12 @@ static void close_tx(struct atm_vcc *vcc)
 	}
 	spin_lock_irqsave(&zatm_dev->lock, flags);
 #if 0
-	zwait;
+	zwait();
 	zout(uPD98401_DEACT_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
 #endif
-	zwait;
+	zwait();
 	zout(uPD98401_CLOSE_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	if (!(zin(CMR) & uPD98401_CHAN_ADDR))
 		printk(KERN_CRIT DEV_LABEL "(itf %d): can't close TX channel "
 		    "%d\n",vcc->dev->number,chan);
@@ -926,9 +926,9 @@ static int open_tx_first(struct atm_vcc *vcc)
 	zatm_vcc->tx_chan = 0;
 	if (vcc->qos.txtp.traffic_class == ATM_NONE) return 0;
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_OPEN_CHAN,CMR);
-	zwait;
+	zwait();
 	DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
 	chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -1559,7 +1559,7 @@ static void zatm_phy_put(struct atm_dev *dev,unsigned char value,
 	struct zatm_dev *zatm_dev;
 
 	zatm_dev = ZATM_DEV(dev);
-	zwait;
+	zwait();
 	zout(value,CER);
 	zout(uPD98401_IND_ACC | uPD98401_IA_B0 |
 	    (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
@@ -1571,10 +1571,10 @@ static unsigned char zatm_phy_get(struct atm_dev *dev,unsigned long addr)
 	struct zatm_dev *zatm_dev;
 
 	zatm_dev = ZATM_DEV(dev);
-	zwait;
+	zwait();
 	zout(uPD98401_IND_ACC | uPD98401_IA_B0 | uPD98401_IA_RW |
 	  (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
-	zwait;
+	zwait();
 	return zin(CER) & 0xff;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 42/99] mISDN: Fix type of switch control variable in ctrl_teimanager

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit aeb5e02aca91522733eb1db595ac607d30c87767 ]

Clang warns (trimmed for brevity):

drivers/isdn/mISDN/tei.c:1193:7: warning: overflow converting case value
to switch condition type (2147764552 to 18446744071562348872) [-Wswitch]
        case IMHOLD_L1:
             ^
drivers/isdn/mISDN/tei.c:1187:7: warning: overflow converting case value
to switch condition type (2147764550 to 18446744071562348870) [-Wswitch]
        case IMCLEAR_L2:
             ^
2 warnings generated.

The root cause is that the _IOC macro can generate really large numbers,
which don't find into type int. My research into how GCC and Clang are
handling this at a low level didn't prove fruitful and surveying the
kernel tree shows that aside from here and a few places in the scsi
subsystem, everything that uses _IOC is at least of type 'unsigned int'.
Make that change here because as nothing in this function cares about
the signedness of the variable and it removes ambiguity, which is never
good when dealing with compilers.

While we're here, remove the unnecessary local variable ret (just return
-EINVAL and 0 directly).

Link: https://github.com/ClangBuiltLinux/linux/issues/67
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/tei.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index 592f597d89518..8261afbbafb05 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -1180,8 +1180,7 @@ static int
 ctrl_teimanager(struct manager *mgr, void *arg)
 {
 	/* currently we only have one option */
-	int	*val = (int *)arg;
-	int	ret = 0;
+	unsigned int *val = (unsigned int *)arg;
 
 	switch (val[0]) {
 	case IMCLEAR_L2:
@@ -1197,9 +1196,9 @@ ctrl_teimanager(struct manager *mgr, void *arg)
 			test_and_clear_bit(OPTION_L1_HOLD, &mgr->options);
 		break;
 	default:
-		ret = -EINVAL;
+		return -EINVAL;
 	}
-	return ret;
+	return 0;
 }
 
 /* This function does create a L2 for fixed TEI in NT Mode */
-- 
2.20.1

[PATCH AUTOSEL 4.9 43/99] qlcnic: fix a return in qlcnic_dcb_get_capability()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit c94f026fb742b2d3199422751dbc4f6fc0e753d8 ]

These functions are supposed to return one on failure and zero on
success.  Returning a zero here could cause uninitialized variable
bugs in several of the callers.  For example:

    drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority()
    error: uninitialized symbol 'caps'.

Fixes: 48365e485275 ("qlcnic: dcb: Add support for CEE Netlink interface.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
index 4b76c69fe86d2..834208e55f7b8 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
@@ -883,7 +883,7 @@ static u8 qlcnic_dcb_get_capability(struct net_device *netdev, int capid,
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 
 	if (!test_bit(QLCNIC_DCB_STATE, &adapter->dcb->state))
-		return 0;
+		return 1;
 
 	switch (capid) {
 	case DCB_CAP_ATTR_PG:
-- 
2.20.1

[PATCH AUTOSEL 4.9 44/99] net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode

[Sasha Levin]

From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>

[ Upstream commit 9737cc99dd14b5b8b9d267618a6061feade8ea68 ]

After flushing all mcast entries from the table, the ones contained in
mc list of ndev are not restored when promisc mode is toggled off,
because they are considered as synched with ALE, thus, in order to
restore them after promisc mode - reset syncing info. This fix
touches only switch mode devices, including single port boards
like Beagle Bone.

Fixes: commit 5da1948969bc
("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update")

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/cpsw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index d7cb205fe7e26..892b06852e150 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -590,6 +590,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
 
 			/* Clear all mcast from ALE */
 			cpsw_ale_flush_multicast(ale, ALE_ALL_PORTS, -1);
+			__dev_mc_unsync(ndev, NULL);
 
 			/* Flood All Unicast Packets to Host port */
 			cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 1);
-- 
2.20.1

[PATCH AUTOSEL 4.9 51/99] sparc64: Rework xchg() definition to avoid warnings.

[Sasha Levin]

From: "David S. Miller" <davem@davemloft.net>

[ Upstream commit 6c2fc9cddc1ffdef8ada1dc8404e5affae849953 ]

Such as:

fs/ocfs2/file.c: In function ‘ocfs2_file_write_iter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

and

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_xdp_setup’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/include/asm/cmpxchg_64.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/sparc/include/asm/cmpxchg_64.h b/arch/sparc/include/asm/cmpxchg_64.h
index faa2f61058c27..92f0a46ace78e 100644
--- a/arch/sparc/include/asm/cmpxchg_64.h
+++ b/arch/sparc/include/asm/cmpxchg_64.h
@@ -40,7 +40,12 @@ static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long
 	return val;
 }
 
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define xchg(ptr,x)							\
+({	__typeof__(*(ptr)) __ret;					\
+	__ret = (__typeof__(*(ptr)))					\
+		__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)));	\
+	__ret;								\
+})
 
 void __xchg_called_with_bad_pointer(void);
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 54/99] macsec: update operstate when lower device changes

[Sasha Levin]

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit e6ac075882b2afcdf2d5ab328ce4ab42a1eb9593 ]

Like all other virtual devices (macvlan, vlan), the operstate of a
macsec device should match the state of its lower device. This is done
by calling netif_stacked_transfer_operstate from its netdevice notifier.

We also need to call netif_stacked_transfer_operstate when a new macsec
device is created, so that its operstate is set properly. This is only
relevant when we try to bring the device up directly when we create it.

Radu Rendec proposed a similar patch, inspired from the 802.1q driver,
that included changing the administrative state of the macsec device,
instead of just the operstate. This version is similar to what the
macvlan driver does, and updates only the operstate.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Reported-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index da10104be16cf..d2a3825376be5 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -3275,6 +3275,9 @@ static int macsec_newlink(struct net *net, struct net_device *dev,
 	if (err < 0)
 		goto del_dev;
 
+	netif_stacked_transfer_operstate(real_dev, dev);
+	linkwatch_fire_event(dev);
+
 	macsec_generation++;
 
 	return 0;
@@ -3446,6 +3449,20 @@ static int macsec_notify(struct notifier_block *this, unsigned long event,
 		return NOTIFY_DONE;
 
 	switch (event) {
+	case NETDEV_DOWN:
+	case NETDEV_UP:
+	case NETDEV_CHANGE: {
+		struct macsec_dev *m, *n;
+		struct macsec_rxh_data *rxd;
+
+		rxd = macsec_data_rtnl(real_dev);
+		list_for_each_entry_safe(m, n, &rxd->secys, secys) {
+			struct net_device *dev = m->secy.netdev;
+
+			netif_stacked_transfer_operstate(real_dev, dev);
+		}
+		break;
+	}
 	case NETDEV_UNREGISTER: {
 		struct macsec_dev *m, *n;
 		struct macsec_rxh_data *rxd;
-- 
2.20.1

[PATCH AUTOSEL 4.9 55/99] macsec: let the administrator set UP state even if lowerdev is down

[Sasha Levin]

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit 07bddef9839378bd6f95b393cf24c420529b4ef1 ]

Currently, the kernel doesn't let the administrator set a macsec device
up unless its lower device is currently up. This is inconsistent, as a
macsec device that is up won't automatically go down when its lower
device goes down.

Now that linkstate propagation works, there's really no reason for this
limitation, so let's remove it.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index d2a3825376be5..a48ed0873cc72 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -2798,9 +2798,6 @@ static int macsec_dev_open(struct net_device *dev)
 	struct net_device *real_dev = macsec->real_dev;
 	int err;
 
-	if (!(real_dev->flags & IFF_UP))
-		return -ENETDOWN;
-
 	err = dev_uc_add(real_dev, dev->dev_addr);
 	if (err < 0)
 		return err;
-- 
2.20.1

[PATCH AUTOSEL 4.9 69/99] igb: shorten maximum PHC timecounter update interval

[Sasha Levin]

From: Miroslav Lichvar <mlichvar@redhat.com>

[ Upstream commit 094bf4d0e9657f6ea1ee3d7e07ce3970796949ce ]

The timecounter needs to be updated at least once per ~550 seconds in
order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old
timestamp.

Since commit 500462a9d ("timers: Switch to a non-cascading wheel"),
scheduling of delayed work seems to be less accurate and a requested
delay of 540 seconds may actually be longer than 550 seconds. Shorten
the delay to 480 seconds to be sure the timecounter is updated in time.

This fixes an issue with HW timestamps on 82580/I350/I354 being off by
~1100 seconds for few seconds every ~9 minutes.

Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_ptp.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 9eb9b68f8935e..ae1f963b60923 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -65,9 +65,15 @@
  *
  * The 40 bit 82580 SYSTIM overflows every
  *   2^40 * 10^-9 /  60  = 18.3 minutes.
+ *
+ * SYSTIM is converted to real time using a timecounter. As
+ * timecounter_cyc2time() allows old timestamps, the timecounter
+ * needs to be updated at least once per half of the SYSTIM interval.
+ * Scheduling of delayed work is not very accurate, so we aim for 8
+ * minutes to be sure the actual interval is shorter than 9.16 minutes.
  */
 
-#define IGB_SYSTIM_OVERFLOW_PERIOD	(HZ * 60 * 9)
+#define IGB_SYSTIM_OVERFLOW_PERIOD	(HZ * 60 * 8)
 #define IGB_PTP_TX_TIMEOUT		(HZ * 15)
 #define INCPERIOD_82576			BIT(E1000_TIMINCA_16NS_SHIFT)
 #define INCVALUE_82576_MASK		GENMASK(E1000_TIMINCA_16NS_SHIFT - 1, 0)
-- 
2.20.1

[PATCH AUTOSEL 4.9 70/99] ntb_netdev: fix sleep time mismatch

[Sasha Levin]

From: Jon Mason <jdmason@kudzu.us>

[ Upstream commit a861594b1b7ffd630f335b351c4e9f938feadb8e ]

The tx_time should be in usecs (according to the comment above the
variable), but the setting of the timer during the rearming is done in
msecs.  Change it to match the expected units.

Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev")
Suggested-by: Gerd W. Haeussler <gerd.haeussler@cesys-it.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ntb_netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c
index a9acf71568555..03009f1becddc 100644
--- a/drivers/net/ntb_netdev.c
+++ b/drivers/net/ntb_netdev.c
@@ -236,7 +236,7 @@ static void ntb_netdev_tx_timer(unsigned long data)
 	struct ntb_netdev *dev = netdev_priv(ndev);
 
 	if (ntb_transport_tx_free_entry(dev->qp) < tx_stop) {
-		mod_timer(&dev->tx_timer, jiffies + msecs_to_jiffies(tx_time));
+		mod_timer(&dev->tx_timer, jiffies + usecs_to_jiffies(tx_time));
 	} else {
 		/* Make sure anybody stopping the queue after this sees the new
 		 * value of ntb_transport_tx_free_entry()
-- 
2.20.1

[PATCH AUTOSEL 4.9 75/99] net: do not abort bulk send on BQL status

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit fe60faa5063822f2d555f4f326c7dd72a60929bf ]

Before calling dev_hard_start_xmit(), upper layers tried
to cook optimal skb list based on BQL budget.

Problem is that GSO packets can end up comsuming more than
the BQL budget.

Breaking the loop is not useful, since requeued packets
are ahead of any packets still in the qdisc.

It is also more expensive, since next TX completion will
push these packets later, while skbs are not in cpu caches.

It is also a behavior difference with TSO packets, that can
break the BQL limit by a large amount.

Note that drivers should use __netdev_tx_sent_queue()
in order to have optimal xmit_more support, and avoid
useless atomic operations as shown in the following patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 547b4daae5cad..c6fb7e61cb405 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2997,7 +2997,7 @@ struct sk_buff *dev_hard_start_xmit(struct sk_buff *first, struct net_device *de
 		}
 
 		skb = next;
-		if (netif_xmit_stopped(txq) && skb) {
+		if (netif_tx_queue_stopped(txq) && skb) {
 			rc = NETDEV_TX_BUSY;
 			break;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.9 78/99] wlcore: Fix the return value in case of error in 'wlcore_vendor_cmd_smart_config_start()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 3419348a97bcc256238101129d69b600ceb5cc70 ]

We return 0 unconditionally at the end of
'wlcore_vendor_cmd_smart_config_start()'.
However, 'ret' is set to some error codes in several error handling paths
and we already return some error codes at the beginning of the function.

Return 'ret' instead to propagate the error code.

Fixes: 80ff8063e87c ("wlcore: handle smart config vendor commands")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wlcore/vendor_cmd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ti/wlcore/vendor_cmd.c b/drivers/net/wireless/ti/wlcore/vendor_cmd.c
index fd4e9ba176c9b..332a3a5c1c900 100644
--- a/drivers/net/wireless/ti/wlcore/vendor_cmd.c
+++ b/drivers/net/wireless/ti/wlcore/vendor_cmd.c
@@ -66,7 +66,7 @@ wlcore_vendor_cmd_smart_config_start(struct wiphy *wiphy,
 out:
 	mutex_unlock(&wl->mutex);
 
-	return 0;
+	return ret;
 }
 
 static int
-- 
2.20.1

[PATCH AUTOSEL 4.9 79/99] rtl8xxxu: Fix missing break in switch

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit 307b00c5e695857ca92fc6a4b8ab6c48f988a1b1 ]

Add missing break statement in order to prevent the code from falling
through to the default case.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 4e725d165aa60..e78545d4add3c 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5660,6 +5660,7 @@ static int rtl8xxxu_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
 		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		break;
 	default:
 		return -EOPNOTSUPP;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.9 80/99] brcmsmac: never log "tid x is not agg'able" by default

[Sasha Levin]

From: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>

[ Upstream commit 96fca788e5788b7ea3b0050eb35a343637e0a465 ]

This message greatly spams the log under heavy Tx of frames with BK access
class which is especially true when operating as AP. It is also not informative
as the "agg'ablity" of TIDs are set once and never change.
Fix this by logging only in debug mode.

Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c    | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index a620b2f6c7c4c..b820e80d4b4c2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -846,8 +846,8 @@ brcms_ops_ampdu_action(struct ieee80211_hw *hw,
 		status = brcms_c_aggregatable(wl->wlc, tid);
 		spin_unlock_bh(&wl->lock);
 		if (!status) {
-			brcms_err(wl->wlc->hw->d11core,
-				  "START: tid %d is not agg\'able\n", tid);
+			brcms_dbg_ht(wl->wlc->hw->d11core,
+				     "START: tid %d is not agg\'able\n", tid);
 			return -EINVAL;
 		}
 		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
-- 
2.20.1

[PATCH AUTOSEL 4.9 81/99] wireless: airo: potential buffer overflow in sprintf()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 3d39e1bb1c88f32820c5f9271f2c8c2fb9a52bac ]

It looks like we wanted to print a maximum of BSSList_rid.ssidLen bytes
of the ssid, but we accidentally use "%*s" (width) instead of "%.*s"
(precision) so if the ssid doesn't have a NUL terminator this could lead
to an overflow.

Static analysis.  Not tested.

Fixes: e174961ca1a0 ("net: convert print_mac to %pM")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/cisco/airo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/cisco/airo.c b/drivers/net/wireless/cisco/airo.c
index 69b826d229c5b..04939e576ee02 100644
--- a/drivers/net/wireless/cisco/airo.c
+++ b/drivers/net/wireless/cisco/airo.c
@@ -5472,7 +5472,7 @@ static int proc_BSSList_open( struct inode *inode, struct file *file ) {
            we have to add a spin lock... */
 	rc = readBSSListRid(ai, doLoseSync, &BSSList_rid);
 	while(rc == 0 && BSSList_rid.index != cpu_to_le16(0xffff)) {
-		ptr += sprintf(ptr, "%pM %*s rssi = %d",
+		ptr += sprintf(ptr, "%pM %.*s rssi = %d",
 			       BSSList_rid.bssid,
 				(int)BSSList_rid.ssidLen,
 				BSSList_rid.ssid,
-- 
2.20.1

[PATCH AUTOSEL 4.9 82/99] rtlwifi: rtl8192de: Fix misleading REG_MCUFWDL information

[Sasha Levin]

From: Shaokun Zhang <zhangshaokun@hisilicon.com>

[ Upstream commit 7d129adff3afbd3a449bc3593f2064ac546d58d3 ]

RT_TRACE shows REG_MCUFWDL value as a decimal value with a '0x'
prefix, which is somewhat misleading.

Fix it to print hexadecimal, as was intended.

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
index 8de29cc3ced07..a24644f34e650 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
@@ -234,7 +234,7 @@ static int _rtl92d_fw_init(struct ieee80211_hw *hw)
 			 rtl_read_byte(rtlpriv, FW_MAC1_READY));
 	}
 	RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
-		 "Polling FW ready fail!! REG_MCUFWDL:0x%08ul\n",
+		 "Polling FW ready fail!! REG_MCUFWDL:0x%08x\n",
 		 rtl_read_dword(rtlpriv, REG_MCUFWDL));
 	return -1;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 89/99] vrf: mark skb for multicast or link-local as enslaved to VRF

[Sasha Levin]

From: Mike Manning <mmanning@vyatta.att-mail.com>

[ Upstream commit 6f12fa775530195a501fb090d092c637f32d0cc5 ]

The skb for packets that are multicast or to a link-local address are
not marked as being enslaved to a VRF, if they are received on a socket
bound to the VRF. This is needed for ND and it is preferable for the
kernel not to have to deal with the additional use-cases if ll or mcast
packets are handled as enslaved. However, this does not allow service
instances listening on unbound and bound to VRF sockets to distinguish
the VRF used, if packets are sent as multicast or to a link-local
address. The fix is for the VRF driver to also mark these skb as being
enslaved to the VRF.

Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vrf.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c
index 3b6e908d31646..39aafe69d3b12 100644
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -967,24 +967,23 @@ static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
 				   struct sk_buff *skb)
 {
 	int orig_iif = skb->skb_iif;
-	bool need_strict;
+	bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
+	bool is_ndisc = ipv6_ndisc_frame(skb);
 
-	/* loopback traffic; do not push through packet taps again.
-	 * Reset pkt_type for upper layers to process skb
+	/* loopback, multicast & non-ND link-local traffic; do not push through
+	 * packet taps again. Reset pkt_type for upper layers to process skb
 	 */
-	if (skb->pkt_type == PACKET_LOOPBACK) {
+	if (skb->pkt_type == PACKET_LOOPBACK || (need_strict && !is_ndisc)) {
 		skb->dev = vrf_dev;
 		skb->skb_iif = vrf_dev->ifindex;
 		IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
-		skb->pkt_type = PACKET_HOST;
+		if (skb->pkt_type == PACKET_LOOPBACK)
+			skb->pkt_type = PACKET_HOST;
 		goto out;
 	}
 
-	/* if packet is NDISC or addressed to multicast or link-local
-	 * then keep the ingress interface
-	 */
-	need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
-	if (!ipv6_ndisc_frame(skb) && !need_strict) {
+	/* if packet is NDISC then keep the ingress interface */
+	if (!is_ndisc) {
 		vrf_rx_stats(vrf_dev, skb->len);
 		skb->dev = vrf_dev;
 		skb->skb_iif = vrf_dev->ifindex;
-- 
2.20.1

Re: [PATCH AUTOSEL 4.9 89/99] vrf: mark skb for multicast or link-local as enslaved to VRF

[David Ahern]

On 11/16/19 8:50 AM, Sasha Levin wrote:
> From: Mike Manning <mmanning@vyatta.att-mail.com>
> 
> [ Upstream commit 6f12fa775530195a501fb090d092c637f32d0cc5 ]
> 
> The skb for packets that are multicast or to a link-local address are
> not marked as being enslaved to a VRF, if they are received on a socket
> bound to the VRF. This is needed for ND and it is preferable for the
> kernel not to have to deal with the additional use-cases if ll or mcast
> packets are handled as enslaved. However, this does not allow service
> instances listening on unbound and bound to VRF sockets to distinguish
> the VRF used, if packets are sent as multicast or to a link-local
> address. The fix is for the VRF driver to also mark these skb as being
> enslaved to the VRF.
> 
> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
> Reviewed-by: David Ahern <dsahern@gmail.com>
> Tested-by: David Ahern <dsahern@gmail.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/net/vrf.c | 19 +++++++++----------
>  1 file changed, 9 insertions(+), 10 deletions(-)
> 

backporting this patch and it's bug fix, "ipv6: Fix handling of LLA with
VRF and sockets bound to VRF" to 4.14 is a bit questionable. They
definitely do not need to come back to 4.9.

Re: [PATCH AUTOSEL 4.9 89/99] vrf: mark skb for multicast or link-local as enslaved to VRF

[Sasha Levin]

On Sun, Nov 17, 2019 at 09:44:38AM -0700, David Ahern wrote:
>On 11/16/19 8:50 AM, Sasha Levin wrote:
>> From: Mike Manning <mmanning@vyatta.att-mail.com>
>>
>> [ Upstream commit 6f12fa775530195a501fb090d092c637f32d0cc5 ]
>>
>> The skb for packets that are multicast or to a link-local address are
>> not marked as being enslaved to a VRF, if they are received on a socket
>> bound to the VRF. This is needed for ND and it is preferable for the
>> kernel not to have to deal with the additional use-cases if ll or mcast
>> packets are handled as enslaved. However, this does not allow service
>> instances listening on unbound and bound to VRF sockets to distinguish
>> the VRF used, if packets are sent as multicast or to a link-local
>> address. The fix is for the VRF driver to also mark these skb as being
>> enslaved to the VRF.
>>
>> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
>> Reviewed-by: David Ahern <dsahern@gmail.com>
>> Tested-by: David Ahern <dsahern@gmail.com>
>> Signed-off-by: David S. Miller <davem@davemloft.net>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>  drivers/net/vrf.c | 19 +++++++++----------
>>  1 file changed, 9 insertions(+), 10 deletions(-)
>>
>
>backporting this patch and it's bug fix, "ipv6: Fix handling of LLA with
>VRF and sockets bound to VRF" to 4.14 is a bit questionable. They
>definitely do not need to come back to 4.9.

I'll drop it, thanks.

-- 
Thanks,
Sasha

[PATCH AUTOSEL 4.9 91/99] net: bcmgenet: return correct value 'ret' from bcmgenet_power_down

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 0db55093b56618088b9a1d445eb6e43b311bea33 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/broadcom/genet/bcmgenet.c: In function 'bcmgenet_power_down':
drivers/net/ethernet/broadcom/genet/bcmgenet.c:1136:6: warning:
 variable 'ret' set but not used [-Wunused-but-set-variable]

bcmgenet_power_down should return 'ret' instead of 0.

Fixes: ca8cf341903f ("net: bcmgenet: propagate errors from bcmgenet_power_down")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 4a4782b3cc1b1..a234044805977 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1078,7 +1078,7 @@ static int bcmgenet_power_down(struct bcmgenet_priv *priv,
 		break;
 	}
 
-	return 0;
+	return ret;
 }
 
 static void bcmgenet_power_up(struct bcmgenet_priv *priv,
-- 
2.20.1

[PATCH AUTOSEL 4.9 92/99] sock: Reset dst when changing sk_mark via setsockopt

[Sasha Levin]

From: David Barmann <david.barmann@stackpath.com>

[ Upstream commit 50254256f382c56bde87d970f3d0d02fdb76ec70 ]

When setting the SO_MARK socket option, if the mark changes, the dst
needs to be reset so that a new route lookup is performed.

This fixes the case where an application wants to change routing by
setting a new sk_mark.  If this is done after some packets have already
been sent, the dst is cached and has no effect.

Signed-off-by: David Barmann <david.barmann@stackpath.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/sock.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/core/sock.c b/net/core/sock.c
index d224933514074..9178c16543758 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -945,10 +945,12 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
 			clear_bit(SOCK_PASSSEC, &sock->flags);
 		break;
 	case SO_MARK:
-		if (!ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN))
+		if (!ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN)) {
 			ret = -EPERM;
-		else
+		} else if (val != sk->sk_mark) {
 			sk->sk_mark = val;
+			sk_dst_reset(sk);
+		}
 		break;
 
 	case SO_RXQ_OVFL:
-- 
2.20.1

[PATCH AUTOSEL 4.9 99/99] ipv6: Fix handling of LLA with VRF and sockets bound to VRF

[Sasha Levin]

From: David Ahern <dsahern@gmail.com>

[ Upstream commit c2027d1e17582903e368abf5d4838b22a98f2b7b ]

A recent commit allows sockets bound to a VRF to receive ipv6 link local
packets. However, it only works for UDP and worse TCP connection attempts
to the LLA with the only listener bound to the VRF just hang where as
before the client gets a reset and connection refused. Fix by adjusting
ir_iif for LL addresses and packets received through a device enslaved
to a VRF.

Fixes: 6f12fa775530 ("vrf: mark skb for multicast or link-local as enslaved to VRF")
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Cc: Mike Manning <mmanning@vyatta.att-mail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/tcp_ipv6.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 4953466cf98f0..54e2557335c1c 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -693,6 +693,7 @@ static void tcp_v6_init_req(struct request_sock *req,
 			    const struct sock *sk_listener,
 			    struct sk_buff *skb)
 {
+	bool l3_slave = ipv6_l3mdev_skb(TCP_SKB_CB(skb)->header.h6.flags);
 	struct inet_request_sock *ireq = inet_rsk(req);
 	const struct ipv6_pinfo *np = inet6_sk(sk_listener);
 
@@ -700,7 +701,7 @@ static void tcp_v6_init_req(struct request_sock *req,
 	ireq->ir_v6_loc_addr = ipv6_hdr(skb)->daddr;
 
 	/* So that link locals have meaning */
-	if (!sk_listener->sk_bound_dev_if &&
+	if ((!sk_listener->sk_bound_dev_if || l3_slave) &&
 	    ipv6_addr_type(&ireq->ir_v6_rmt_addr) & IPV6_ADDR_LINKLOCAL)
 		ireq->ir_iif = tcp_v6_iif(skb);
 
-- 
2.20.1