[PATCH AUTOSEL 4.4 07/77] brcmsmac: AP mode: update beacon when TIM changes

[PATCH AUTOSEL 4.4 07/77] brcmsmac: AP mode: update beacon when TIM changes

[Sasha Levin]

From: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>

[ Upstream commit 2258ee58baa554609a3cc3996276e4276f537b6d ]

Beacons are not updated to reflect TIM changes. This is not compliant with
power-saving client stations as the beacons do not have valid TIM and can
cause the network to stall at random occasions and to have highly variable
latencies.
Fix it by updating beacon templates on mac80211 set_tim callback.

Addresses an issue described in:
https://marc.info/?i=20180911163534.21312d08%20()%20manjaro

Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/brcm80211/brcmsmac/mac80211_if.c | 26 +++++++++++++++++++
 .../net/wireless/brcm80211/brcmsmac/main.h    |  1 +
 2 files changed, 27 insertions(+)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 61ae2768132a0..e3b01d804cf24 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -502,6 +502,7 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	}
 
 	spin_lock_bh(&wl->lock);
+	wl->wlc->vif = vif;
 	wl->mute_tx = false;
 	brcms_c_mute(wl->wlc, false);
 	if (vif->type == NL80211_IFTYPE_STATION)
@@ -519,6 +520,11 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 static void
 brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
+	struct brcms_info *wl = hw->priv;
+
+	spin_lock_bh(&wl->lock);
+	wl->wlc->vif = NULL;
+	spin_unlock_bh(&wl->lock);
 }
 
 static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
@@ -937,6 +943,25 @@ static void brcms_ops_set_tsf(struct ieee80211_hw *hw,
 	spin_unlock_bh(&wl->lock);
 }
 
+static int brcms_ops_beacon_set_tim(struct ieee80211_hw *hw,
+				 struct ieee80211_sta *sta, bool set)
+{
+	struct brcms_info *wl = hw->priv;
+	struct sk_buff *beacon = NULL;
+	u16 tim_offset = 0;
+
+	spin_lock_bh(&wl->lock);
+	if (wl->wlc->vif)
+		beacon = ieee80211_beacon_get_tim(hw, wl->wlc->vif,
+						  &tim_offset, NULL);
+	if (beacon)
+		brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
+				       wl->wlc->vif->bss_conf.dtim_period);
+	spin_unlock_bh(&wl->lock);
+
+	return 0;
+}
+
 static const struct ieee80211_ops brcms_ops = {
 	.tx = brcms_ops_tx,
 	.start = brcms_ops_start,
@@ -955,6 +980,7 @@ static const struct ieee80211_ops brcms_ops = {
 	.flush = brcms_ops_flush,
 	.get_tsf = brcms_ops_get_tsf,
 	.set_tsf = brcms_ops_set_tsf,
+	.set_tim = brcms_ops_beacon_set_tim,
 };
 
 void brcms_dpc(unsigned long data)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.h b/drivers/net/wireless/brcm80211/brcmsmac/main.h
index c4d135cff04ad..9f76b880814e8 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.h
@@ -563,6 +563,7 @@ struct brcms_c_info {
 
 	struct wiphy *wiphy;
 	struct scb pri_scb;
+	struct ieee80211_vif *vif;
 
 	struct sk_buff *beacon;
 	u16 beacon_tim_offset;
-- 
2.20.1

[PATCH AUTOSEL 4.4 22/77] net: fix warning in af_unix

[Sasha Levin]

From: Kyeongdon Kim <kyeongdon.kim@lge.com>

[ Upstream commit 33c4368ee2589c165aebd8d388cbd91e9adb9688 ]

This fixes the "'hash' may be used uninitialized in this function"

net/unix/af_unix.c:1041:20: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized]
  addr->hash = hash ^ sk->sk_type;

Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/unix/af_unix.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index b1a72615fdc30..b5e2ef242efe7 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -224,6 +224,8 @@ static inline void unix_release_addr(struct unix_address *addr)
 
 static int unix_mkname(struct sockaddr_un *sunaddr, int len, unsigned int *hashp)
 {
+	*hashp = 0;
+
 	if (len <= sizeof(short) || len > sizeof(*sunaddr))
 		return -EINVAL;
 	if (!sunaddr || sunaddr->sun_family != AF_UNIX)
-- 
2.20.1

[PATCH AUTOSEL 4.4 27/77] SUNRPC: Fix a compile warning for cmpxchg64()

[Sasha Levin]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit e732f4485a150492b286f3efc06f9b34dd6b9995 ]

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/gss_krb5_seal.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/sunrpc/auth_gss/gss_krb5_seal.c b/net/sunrpc/auth_gss/gss_krb5_seal.c
index 1d74d653e6c05..ad0dcb69395d7 100644
--- a/net/sunrpc/auth_gss/gss_krb5_seal.c
+++ b/net/sunrpc/auth_gss/gss_krb5_seal.c
@@ -63,6 +63,7 @@
 #include <linux/sunrpc/gss_krb5.h>
 #include <linux/random.h>
 #include <linux/crypto.h>
+#include <linux/atomic.h>
 
 #if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
 # define RPCDBG_FACILITY        RPCDBG_AUTH
-- 
2.20.1

[PATCH AUTOSEL 4.4 28/77] atm: zatm: Fix empty body Clang warnings

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 64b9d16e2d02ca6e5dc8fcd30cfd52b0ecaaa8f4 ]

Clang warns:

drivers/atm/zatm.c:513:7: error: while loop has empty body
[-Werror,-Wempty-body]
        zwait;
             ^
drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to
silence this warning

Get rid of this warning by using an empty do-while loop. While we're at
it, add parentheses to make it clear that this is a function-like macro.

Link: https://github.com/ClangBuiltLinux/linux/issues/42
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/zatm.c | 42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 94712e1c5cf9a..bcdde3e360522 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -126,7 +126,7 @@ static unsigned long dummy[2] = {0,0};
 #define zin_n(r) inl(zatm_dev->base+r*4)
 #define zin(r) inl(zatm_dev->base+uPD98401_##r*4)
 #define zout(v,r) outl(v,zatm_dev->base+uPD98401_##r*4)
-#define zwait while (zin(CMR) & uPD98401_BUSY)
+#define zwait() do {} while (zin(CMR) & uPD98401_BUSY)
 
 /* RX0, RX1, TX0, TX1 */
 static const int mbx_entries[NR_MBX] = { 1024,1024,1024,1024 };
@@ -140,7 +140,7 @@ static const int mbx_esize[NR_MBX] = { 16,16,4,4 }; /* entry size in bytes */
 
 static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
 {
-	zwait;
+	zwait();
 	zout(value,CER);
 	zout(uPD98401_IND_ACC | uPD98401_IA_BALL |
 	    (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
@@ -149,10 +149,10 @@ static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
 
 static u32 zpeekl(struct zatm_dev *zatm_dev,u32 addr)
 {
-	zwait;
+	zwait();
 	zout(uPD98401_IND_ACC | uPD98401_IA_BALL | uPD98401_IA_RW |
 	  (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
-	zwait;
+	zwait();
 	return zin(CER);
 }
 
@@ -241,7 +241,7 @@ static void refill_pool(struct atm_dev *dev,int pool)
 	}
 	if (first) {
 		spin_lock_irqsave(&zatm_dev->lock, flags);
-		zwait;
+		zwait();
 		zout(virt_to_bus(first),CER);
 		zout(uPD98401_ADD_BAT | (pool << uPD98401_POOL_SHIFT) | count,
 		    CMR);
@@ -508,9 +508,9 @@ static int open_rx_first(struct atm_vcc *vcc)
 	}
 	if (zatm_vcc->pool < 0) return -EMSGSIZE;
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_OPEN_CHAN,CMR);
-	zwait;
+	zwait();
 	DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
 	chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -571,21 +571,21 @@ static void close_rx(struct atm_vcc *vcc)
 		pos = vcc->vci >> 1;
 		shift = (1-(vcc->vci & 1)) << 4;
 		zpokel(zatm_dev,zpeekl(zatm_dev,pos) & ~(0xffff << shift),pos);
-		zwait;
+		zwait();
 		zout(uPD98401_NOP,CMR);
-		zwait;
+		zwait();
 		zout(uPD98401_NOP,CMR);
 		spin_unlock_irqrestore(&zatm_dev->lock, flags);
 	}
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_DEACT_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	udelay(10); /* why oh why ... ? */
 	zout(uPD98401_CLOSE_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	if (!(zin(CMR) & uPD98401_CHAN_ADDR))
 		printk(KERN_CRIT DEV_LABEL "(itf %d): can't close RX channel "
 		    "%d\n",vcc->dev->number,zatm_vcc->rx_chan);
@@ -698,7 +698,7 @@ printk("NONONONOO!!!!\n");
 	skb_queue_tail(&zatm_vcc->tx_queue,skb);
 	DPRINTK("QRP=0x%08lx\n",zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+
 	  uPD98401_TXVC_QRP));
-	zwait;
+	zwait();
 	zout(uPD98401_TX_READY | (zatm_vcc->tx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -890,12 +890,12 @@ static void close_tx(struct atm_vcc *vcc)
 	}
 	spin_lock_irqsave(&zatm_dev->lock, flags);
 #if 0
-	zwait;
+	zwait();
 	zout(uPD98401_DEACT_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
 #endif
-	zwait;
+	zwait();
 	zout(uPD98401_CLOSE_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	if (!(zin(CMR) & uPD98401_CHAN_ADDR))
 		printk(KERN_CRIT DEV_LABEL "(itf %d): can't close TX channel "
 		    "%d\n",vcc->dev->number,chan);
@@ -925,9 +925,9 @@ static int open_tx_first(struct atm_vcc *vcc)
 	zatm_vcc->tx_chan = 0;
 	if (vcc->qos.txtp.traffic_class == ATM_NONE) return 0;
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_OPEN_CHAN,CMR);
-	zwait;
+	zwait();
 	DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
 	chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -1557,7 +1557,7 @@ static void zatm_phy_put(struct atm_dev *dev,unsigned char value,
 	struct zatm_dev *zatm_dev;
 
 	zatm_dev = ZATM_DEV(dev);
-	zwait;
+	zwait();
 	zout(value,CER);
 	zout(uPD98401_IND_ACC | uPD98401_IA_B0 |
 	    (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
@@ -1569,10 +1569,10 @@ static unsigned char zatm_phy_get(struct atm_dev *dev,unsigned long addr)
 	struct zatm_dev *zatm_dev;
 
 	zatm_dev = ZATM_DEV(dev);
-	zwait;
+	zwait();
 	zout(uPD98401_IND_ACC | uPD98401_IA_B0 | uPD98401_IA_RW |
 	  (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
-	zwait;
+	zwait();
 	return zin(CER) & 0xff;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 34/77] mISDN: Fix type of switch control variable in ctrl_teimanager

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit aeb5e02aca91522733eb1db595ac607d30c87767 ]

Clang warns (trimmed for brevity):

drivers/isdn/mISDN/tei.c:1193:7: warning: overflow converting case value
to switch condition type (2147764552 to 18446744071562348872) [-Wswitch]
        case IMHOLD_L1:
             ^
drivers/isdn/mISDN/tei.c:1187:7: warning: overflow converting case value
to switch condition type (2147764550 to 18446744071562348870) [-Wswitch]
        case IMCLEAR_L2:
             ^
2 warnings generated.

The root cause is that the _IOC macro can generate really large numbers,
which don't find into type int. My research into how GCC and Clang are
handling this at a low level didn't prove fruitful and surveying the
kernel tree shows that aside from here and a few places in the scsi
subsystem, everything that uses _IOC is at least of type 'unsigned int'.
Make that change here because as nothing in this function cares about
the signedness of the variable and it removes ambiguity, which is never
good when dealing with compilers.

While we're here, remove the unnecessary local variable ret (just return
-EINVAL and 0 directly).

Link: https://github.com/ClangBuiltLinux/linux/issues/67
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/tei.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index 592f597d89518..8261afbbafb05 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -1180,8 +1180,7 @@ static int
 ctrl_teimanager(struct manager *mgr, void *arg)
 {
 	/* currently we only have one option */
-	int	*val = (int *)arg;
-	int	ret = 0;
+	unsigned int *val = (unsigned int *)arg;
 
 	switch (val[0]) {
 	case IMCLEAR_L2:
@@ -1197,9 +1196,9 @@ ctrl_teimanager(struct manager *mgr, void *arg)
 			test_and_clear_bit(OPTION_L1_HOLD, &mgr->options);
 		break;
 	default:
-		ret = -EINVAL;
+		return -EINVAL;
 	}
-	return ret;
+	return 0;
 }
 
 /* This function does create a L2 for fixed TEI in NT Mode */
-- 
2.20.1

[PATCH AUTOSEL 4.4 35/77] qlcnic: fix a return in qlcnic_dcb_get_capability()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit c94f026fb742b2d3199422751dbc4f6fc0e753d8 ]

These functions are supposed to return one on failure and zero on
success.  Returning a zero here could cause uninitialized variable
bugs in several of the callers.  For example:

    drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority()
    error: uninitialized symbol 'caps'.

Fixes: 48365e485275 ("qlcnic: dcb: Add support for CEE Netlink interface.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
index a72bcddf160ac..178e7236eeb51 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
@@ -883,7 +883,7 @@ static u8 qlcnic_dcb_get_capability(struct net_device *netdev, int capid,
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 
 	if (!test_bit(QLCNIC_DCB_STATE, &adapter->dcb->state))
-		return 0;
+		return 1;
 
 	switch (capid) {
 	case DCB_CAP_ATTR_PG:
-- 
2.20.1

[PATCH AUTOSEL 4.4 40/77] sparc64: Rework xchg() definition to avoid warnings.

[Sasha Levin]

From: "David S. Miller" <davem@davemloft.net>

[ Upstream commit 6c2fc9cddc1ffdef8ada1dc8404e5affae849953 ]

Such as:

fs/ocfs2/file.c: In function ‘ocfs2_file_write_iter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

and

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_xdp_setup’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/include/asm/cmpxchg_64.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/sparc/include/asm/cmpxchg_64.h b/arch/sparc/include/asm/cmpxchg_64.h
index faa2f61058c27..92f0a46ace78e 100644
--- a/arch/sparc/include/asm/cmpxchg_64.h
+++ b/arch/sparc/include/asm/cmpxchg_64.h
@@ -40,7 +40,12 @@ static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long
 	return val;
 }
 
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define xchg(ptr,x)							\
+({	__typeof__(*(ptr)) __ret;					\
+	__ret = (__typeof__(*(ptr)))					\
+		__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)));	\
+	__ret;								\
+})
 
 void __xchg_called_with_bad_pointer(void);
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 53/77] igb: shorten maximum PHC timecounter update interval

[Sasha Levin]

From: Miroslav Lichvar <mlichvar@redhat.com>

[ Upstream commit 094bf4d0e9657f6ea1ee3d7e07ce3970796949ce ]

The timecounter needs to be updated at least once per ~550 seconds in
order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old
timestamp.

Since commit 500462a9d ("timers: Switch to a non-cascading wheel"),
scheduling of delayed work seems to be less accurate and a requested
delay of 540 seconds may actually be longer than 550 seconds. Shorten
the delay to 480 seconds to be sure the timecounter is updated in time.

This fixes an issue with HW timestamps on 82580/I350/I354 being off by
~1100 seconds for few seconds every ~9 minutes.

Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_ptp.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index c44df87c38de2..5e65d8a78c3ed 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -65,9 +65,15 @@
  *
  * The 40 bit 82580 SYSTIM overflows every
  *   2^40 * 10^-9 /  60  = 18.3 minutes.
+ *
+ * SYSTIM is converted to real time using a timecounter. As
+ * timecounter_cyc2time() allows old timestamps, the timecounter
+ * needs to be updated at least once per half of the SYSTIM interval.
+ * Scheduling of delayed work is not very accurate, so we aim for 8
+ * minutes to be sure the actual interval is shorter than 9.16 minutes.
  */
 
-#define IGB_SYSTIM_OVERFLOW_PERIOD	(HZ * 60 * 9)
+#define IGB_SYSTIM_OVERFLOW_PERIOD	(HZ * 60 * 8)
 #define IGB_PTP_TX_TIMEOUT		(HZ * 15)
 #define INCPERIOD_82576			(1 << E1000_TIMINCA_16NS_SHIFT)
 #define INCVALUE_82576_MASK		((1 << E1000_TIMINCA_16NS_SHIFT) - 1)
-- 
2.20.1

[PATCH AUTOSEL 4.4 54/77] ntb_netdev: fix sleep time mismatch

[Sasha Levin]

From: Jon Mason <jdmason@kudzu.us>

[ Upstream commit a861594b1b7ffd630f335b351c4e9f938feadb8e ]

The tx_time should be in usecs (according to the comment above the
variable), but the setting of the timer during the rearming is done in
msecs.  Change it to match the expected units.

Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev")
Suggested-by: Gerd W. Haeussler <gerd.haeussler@cesys-it.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ntb_netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c
index a9acf71568555..03009f1becddc 100644
--- a/drivers/net/ntb_netdev.c
+++ b/drivers/net/ntb_netdev.c
@@ -236,7 +236,7 @@ static void ntb_netdev_tx_timer(unsigned long data)
 	struct ntb_netdev *dev = netdev_priv(ndev);
 
 	if (ntb_transport_tx_free_entry(dev->qp) < tx_stop) {
-		mod_timer(&dev->tx_timer, jiffies + msecs_to_jiffies(tx_time));
+		mod_timer(&dev->tx_timer, jiffies + usecs_to_jiffies(tx_time));
 	} else {
 		/* Make sure anybody stopping the queue after this sees the new
 		 * value of ntb_transport_tx_free_entry()
-- 
2.20.1

[PATCH AUTOSEL 4.4 58/77] net: do not abort bulk send on BQL status

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit fe60faa5063822f2d555f4f326c7dd72a60929bf ]

Before calling dev_hard_start_xmit(), upper layers tried
to cook optimal skb list based on BQL budget.

Problem is that GSO packets can end up comsuming more than
the BQL budget.

Breaking the loop is not useful, since requeued packets
are ahead of any packets still in the qdisc.

It is also more expensive, since next TX completion will
push these packets later, while skbs are not in cpu caches.

It is also a behavior difference with TSO packets, that can
break the BQL limit by a large amount.

Note that drivers should use __netdev_tx_sent_queue()
in order to have optimal xmit_more support, and avoid
useless atomic operations as shown in the following patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 18a5154e2f254..903c6242b4499 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2801,7 +2801,7 @@ struct sk_buff *dev_hard_start_xmit(struct sk_buff *first, struct net_device *de
 		}
 
 		skb = next;
-		if (netif_xmit_stopped(txq) && skb) {
+		if (netif_tx_queue_stopped(txq) && skb) {
 			rc = NETDEV_TX_BUSY;
 			break;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.4 61/77] wlcore: Fix the return value in case of error in 'wlcore_vendor_cmd_smart_config_start()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 3419348a97bcc256238101129d69b600ceb5cc70 ]

We return 0 unconditionally at the end of
'wlcore_vendor_cmd_smart_config_start()'.
However, 'ret' is set to some error codes in several error handling paths
and we already return some error codes at the beginning of the function.

Return 'ret' instead to propagate the error code.

Fixes: 80ff8063e87c ("wlcore: handle smart config vendor commands")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wlcore/vendor_cmd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ti/wlcore/vendor_cmd.c b/drivers/net/wireless/ti/wlcore/vendor_cmd.c
index fd4e9ba176c9b..332a3a5c1c900 100644
--- a/drivers/net/wireless/ti/wlcore/vendor_cmd.c
+++ b/drivers/net/wireless/ti/wlcore/vendor_cmd.c
@@ -66,7 +66,7 @@ wlcore_vendor_cmd_smart_config_start(struct wiphy *wiphy,
 out:
 	mutex_unlock(&wl->mutex);
 
-	return 0;
+	return ret;
 }
 
 static int
-- 
2.20.1

[PATCH AUTOSEL 4.4 62/77] rtl8xxxu: Fix missing break in switch

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit 307b00c5e695857ca92fc6a4b8ab6c48f988a1b1 ]

Add missing break statement in order to prevent the code from falling
through to the default case.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 7d820c3953754..52def14d55d33 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -5331,6 +5331,7 @@ static int rtl8xxxu_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
 		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		break;
 	default:
 		return -EOPNOTSUPP;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.4 63/77] brcmsmac: never log "tid x is not agg'able" by default

[Sasha Levin]

From: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>

[ Upstream commit 96fca788e5788b7ea3b0050eb35a343637e0a465 ]

This message greatly spams the log under heavy Tx of frames with BK access
class which is especially true when operating as AP. It is also not informative
as the "agg'ablity" of TIDs are set once and never change.
Fix this by logging only in debug mode.

Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index e3b01d804cf24..a4e1eec96c60d 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -846,8 +846,8 @@ brcms_ops_ampdu_action(struct ieee80211_hw *hw,
 		status = brcms_c_aggregatable(wl->wlc, tid);
 		spin_unlock_bh(&wl->lock);
 		if (!status) {
-			brcms_err(wl->wlc->hw->d11core,
-				  "START: tid %d is not agg\'able\n", tid);
+			brcms_dbg_ht(wl->wlc->hw->d11core,
+				     "START: tid %d is not agg\'able\n", tid);
 			return -EINVAL;
 		}
 		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
-- 
2.20.1

[PATCH AUTOSEL 4.4 64/77] wireless: airo: potential buffer overflow in sprintf()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 3d39e1bb1c88f32820c5f9271f2c8c2fb9a52bac ]

It looks like we wanted to print a maximum of BSSList_rid.ssidLen bytes
of the ssid, but we accidentally use "%*s" (width) instead of "%.*s"
(precision) so if the ssid doesn't have a NUL terminator this could lead
to an overflow.

Static analysis.  Not tested.

Fixes: e174961ca1a0 ("net: convert print_mac to %pM")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/airo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 17c40f06f13e5..82d24f2b9c190 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5484,7 +5484,7 @@ static int proc_BSSList_open( struct inode *inode, struct file *file ) {
            we have to add a spin lock... */
 	rc = readBSSListRid(ai, doLoseSync, &BSSList_rid);
 	while(rc == 0 && BSSList_rid.index != cpu_to_le16(0xffff)) {
-		ptr += sprintf(ptr, "%pM %*s rssi = %d",
+		ptr += sprintf(ptr, "%pM %.*s rssi = %d",
 			       BSSList_rid.bssid,
 				(int)BSSList_rid.ssidLen,
 				BSSList_rid.ssid,
-- 
2.20.1

[PATCH AUTOSEL 4.4 65/77] rtlwifi: rtl8192de: Fix misleading REG_MCUFWDL information

[Sasha Levin]

From: Shaokun Zhang <zhangshaokun@hisilicon.com>

[ Upstream commit 7d129adff3afbd3a449bc3593f2064ac546d58d3 ]

RT_TRACE shows REG_MCUFWDL value as a decimal value with a '0x'
prefix, which is somewhat misleading.

Fix it to print hexadecimal, as was intended.

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
index 62ef8209718f1..5bf3712a4d49d 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
@@ -234,7 +234,7 @@ static int _rtl92d_fw_init(struct ieee80211_hw *hw)
 			 rtl_read_byte(rtlpriv, FW_MAC1_READY));
 	}
 	RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
-		 "Polling FW ready fail!! REG_MCUFWDL:0x%08ul\n",
+		 "Polling FW ready fail!! REG_MCUFWDL:0x%08x\n",
 		 rtl_read_dword(rtlpriv, REG_MCUFWDL));
 	return -1;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.4 72/77] net: bcmgenet: return correct value 'ret' from bcmgenet_power_down

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 0db55093b56618088b9a1d445eb6e43b311bea33 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/broadcom/genet/bcmgenet.c: In function 'bcmgenet_power_down':
drivers/net/ethernet/broadcom/genet/bcmgenet.c:1136:6: warning:
 variable 'ret' set but not used [-Wunused-but-set-variable]

bcmgenet_power_down should return 'ret' instead of 0.

Fixes: ca8cf341903f ("net: bcmgenet: propagate errors from bcmgenet_power_down")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 04fe570275cd6..34fae5576b603 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1074,7 +1074,7 @@ static int bcmgenet_power_down(struct bcmgenet_priv *priv,
 		break;
 	}
 
-	return 0;
+	return ret;
 }
 
 static void bcmgenet_power_up(struct bcmgenet_priv *priv,
-- 
2.20.1

[PATCH AUTOSEL 4.4 73/77] sock: Reset dst when changing sk_mark via setsockopt

[Sasha Levin]

From: David Barmann <david.barmann@stackpath.com>

[ Upstream commit 50254256f382c56bde87d970f3d0d02fdb76ec70 ]

When setting the SO_MARK socket option, if the mark changes, the dst
needs to be reset so that a new route lookup is performed.

This fixes the case where an application wants to change routing by
setting a new sk_mark.  If this is done after some packets have already
been sent, the dst is cached and has no effect.

Signed-off-by: David Barmann <david.barmann@stackpath.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/sock.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/core/sock.c b/net/core/sock.c
index 8aa4a5f895723..92d5f6232ec76 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -951,10 +951,12 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
 			clear_bit(SOCK_PASSSEC, &sock->flags);
 		break;
 	case SO_MARK:
-		if (!ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN))
+		if (!ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN)) {
 			ret = -EPERM;
-		else
+		} else if (val != sk->sk_mark) {
 			sk->sk_mark = val;
+			sk_dst_reset(sk);
+		}
 		break;
 
 	case SO_RXQ_OVFL:
-- 
2.20.1