[PATCH v6 03/49] soc: fsl: qe: rename qe_(clr/set/clrset)bit* helpers

[PATCH v6 03/49] soc: fsl: qe: rename qe_(clr/set/clrset)bit* helpers

[Rasmus Villemoes]

Make it clear that these operate on big-endian registers (i.e. use the
iowrite*be primitives) before we introduce more uses of them and allow
the QE drivers to be built for platforms other than ppc32.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
 drivers/net/wan/fsl_ucc_hdlc.c |  4 ++--
 drivers/soc/fsl/qe/ucc.c       | 10 +++++-----
 include/soc/fsl/qe/qe.h        | 18 +++++++++---------
 3 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index ca0f3be2b6bf..ce6af7d5380f 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -623,8 +623,8 @@ static int ucc_hdlc_poll(struct napi_struct *napi, int budget)
 
 	if (howmany < budget) {
 		napi_complete_done(napi, howmany);
-		qe_setbits32(priv->uccf->p_uccm,
-			     (UCCE_HDLC_RX_EVENTS | UCCE_HDLC_TX_EVENTS) << 16);
+		qe_setbits_be32(priv->uccf->p_uccm,
+				(UCCE_HDLC_RX_EVENTS | UCCE_HDLC_TX_EVENTS) << 16);
 	}
 
 	return howmany;
diff --git a/drivers/soc/fsl/qe/ucc.c b/drivers/soc/fsl/qe/ucc.c
index 024d239ac1e1..ae9f2cf560cb 100644
--- a/drivers/soc/fsl/qe/ucc.c
+++ b/drivers/soc/fsl/qe/ucc.c
@@ -540,8 +540,8 @@ int ucc_set_tdm_rxtx_clk(u32 tdm_num, enum qe_clock clock,
 	cmxs1cr = (tdm_num < 4) ? &qe_mux_reg->cmxsi1cr_l :
 				  &qe_mux_reg->cmxsi1cr_h;
 
-	qe_clrsetbits32(cmxs1cr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
-			clock_bits << shift);
+	qe_clrsetbits_be32(cmxs1cr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+			   clock_bits << shift);
 
 	return 0;
 }
@@ -650,9 +650,9 @@ int ucc_set_tdm_rxtx_sync(u32 tdm_num, enum qe_clock clock,
 
 	shift = ucc_get_tdm_sync_shift(mode, tdm_num);
 
-	qe_clrsetbits32(&qe_mux_reg->cmxsi1syr,
-			QE_CMXUCR_TX_CLK_SRC_MASK << shift,
-			source << shift);
+	qe_clrsetbits_be32(&qe_mux_reg->cmxsi1syr,
+			   QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+			   source << shift);
 
 	return 0;
 }
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index c1036d16ed03..a1aa4eb28f0c 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -241,20 +241,20 @@ static inline int qe_alive_during_sleep(void)
 #define qe_muram_offset cpm_muram_offset
 #define qe_muram_dma cpm_muram_dma
 
-#define qe_setbits32(_addr, _v) iowrite32be(ioread32be(_addr) |  (_v), (_addr))
-#define qe_clrbits32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))
+#define qe_setbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) |  (_v), (_addr))
+#define qe_clrbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))
 
-#define qe_setbits16(_addr, _v) iowrite16be(ioread16be(_addr) |  (_v), (_addr))
-#define qe_clrbits16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr))
+#define qe_setbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) |  (_v), (_addr))
+#define qe_clrbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr))
 
-#define qe_setbits8(_addr, _v) iowrite8(ioread8(_addr) |  (_v), (_addr))
-#define qe_clrbits8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr))
+#define qe_setbits_8(_addr, _v) iowrite8(ioread8(_addr) |  (_v), (_addr))
+#define qe_clrbits_8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr))
 
-#define qe_clrsetbits32(addr, clear, set) \
+#define qe_clrsetbits_be32(addr, clear, set) \
 	iowrite32be((ioread32be(addr) & ~(clear)) | (set), (addr))
-#define qe_clrsetbits16(addr, clear, set) \
+#define qe_clrsetbits_be16(addr, clear, set) \
 	iowrite16be((ioread16be(addr) & ~(clear)) | (set), (addr))
-#define qe_clrsetbits8(addr, clear, set) \
+#define qe_clrsetbits_8(addr, clear, set) \
 	iowrite8((ioread8(addr) & ~(clear)) | (set), (addr))
 
 /* Structure that defines QE firmware binary files.
-- 
2.23.0

[PATCH v6 44/49] net/wan/fsl_ucc_hdlc: avoid use of IS_ERR_VALUE()

[Rasmus Villemoes]

When building this on a 64-bit platform gcc rightly warns that the
error checking is broken (-ENOMEM stored in an u32 does not compare
greater than (unsigned long)-MAX_ERRNO). Instead, now that
qe_muram_alloc() returns s32, use that type to store the return value
and use standard kernel style "ret < 0".

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
 drivers/net/wan/fsl_ucc_hdlc.c | 10 +++++-----
 drivers/net/wan/fsl_ucc_hdlc.h |  2 +-
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index ce6af7d5380f..405b24a5a60d 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -84,8 +84,8 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
 	int ret, i;
 	void *bd_buffer;
 	dma_addr_t bd_dma_addr;
-	u32 riptr;
-	u32 tiptr;
+	s32 riptr;
+	s32 tiptr;
 	u32 gumr;
 
 	ut_info = priv->ut_info;
@@ -195,7 +195,7 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
 	priv->ucc_pram_offset = qe_muram_alloc(sizeof(struct ucc_hdlc_param),
 				ALIGNMENT_OF_UCC_HDLC_PRAM);
 
-	if (IS_ERR_VALUE(priv->ucc_pram_offset)) {
+	if (priv->ucc_pram_offset < 0) {
 		dev_err(priv->dev, "Can not allocate MURAM for hdlc parameter.\n");
 		ret = -ENOMEM;
 		goto free_tx_bd;
@@ -233,14 +233,14 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
 
 	/* Alloc riptr, tiptr */
 	riptr = qe_muram_alloc(32, 32);
-	if (IS_ERR_VALUE(riptr)) {
+	if (riptr < 0) {
 		dev_err(priv->dev, "Cannot allocate MURAM mem for Receive internal temp data pointer\n");
 		ret = -ENOMEM;
 		goto free_tx_skbuff;
 	}
 
 	tiptr = qe_muram_alloc(32, 32);
-	if (IS_ERR_VALUE(tiptr)) {
+	if (tiptr < 0) {
 		dev_err(priv->dev, "Cannot allocate MURAM mem for Transmit internal temp data pointer\n");
 		ret = -ENOMEM;
 		goto free_riptr;
diff --git a/drivers/net/wan/fsl_ucc_hdlc.h b/drivers/net/wan/fsl_ucc_hdlc.h
index 8b3507ae1781..71d5ad0a7b98 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.h
+++ b/drivers/net/wan/fsl_ucc_hdlc.h
@@ -98,7 +98,7 @@ struct ucc_hdlc_private {
 
 	unsigned short tx_ring_size;
 	unsigned short rx_ring_size;
-	u32 ucc_pram_offset;
+	s32 ucc_pram_offset;
 
 	unsigned short encoding;
 	unsigned short parity;
-- 
2.23.0

[PATCH v6 45/49] net/wan/fsl_ucc_hdlc: fix reading of __be16 registers

[Rasmus Villemoes]

When releasing the allocated muram resource, we rely on reading back
the offsets from the riptr/tiptr registers. But those registers are
__be16 (and we indeed write them using iowrite16be), so we can't just
read them back with a normal C dereference.

This is not currently a real problem, since for now the driver is
PPC32-only. But it will soon be allowed to be used on arm and arm64 as
well.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
 drivers/net/wan/fsl_ucc_hdlc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index 405b24a5a60d..8d13586bb774 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -732,8 +732,8 @@ static int uhdlc_open(struct net_device *dev)
 
 static void uhdlc_memclean(struct ucc_hdlc_private *priv)
 {
-	qe_muram_free(priv->ucc_pram->riptr);
-	qe_muram_free(priv->ucc_pram->tiptr);
+	qe_muram_free(ioread16be(&priv->ucc_pram->riptr));
+	qe_muram_free(ioread16be(&priv->ucc_pram->tiptr));
 
 	if (priv->rx_bd_base) {
 		dma_free_coherent(priv->dev,
-- 
2.23.0

[PATCH v6 46/49] net/wan/fsl_ucc_hdlc: reject muram offsets above 64K

[Rasmus Villemoes]

Qiang Zhao points out that these offsets get written to 16-bit
registers, and there are some QE platforms with more than 64K
muram. So it is possible that qe_muram_alloc() gives us an allocation
that can't actually be used by the hardware, so detect and reject
that.

Reported-by: Qiang Zhao <qiang.zhao@nxp.com>
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
 drivers/net/wan/fsl_ucc_hdlc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index 8d13586bb774..f029eaa7cfc0 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -245,6 +245,11 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
 		ret = -ENOMEM;
 		goto free_riptr;
 	}
+	if (riptr != (u16)riptr || tiptr != (u16)tiptr) {
+		dev_err(priv->dev, "MURAM allocation out of addressable range\n");
+		ret = -ENOMEM;
+		goto free_tiptr;
+	}
 
 	/* Set RIPTR, TIPTR */
 	iowrite16be(riptr, &priv->ucc_pram->riptr);
-- 
2.23.0

[PATCH v6 47/49] net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32

[Rasmus Villemoes]

Currently, QUICC_ENGINE depends on PPC32, so this in itself does not
change anything. In order to allow removing the PPC32 dependency from
QUICC_ENGINE and avoid allmodconfig build failures, add this explicit
dependency.

Also, the QE Ethernet has never been integrated on any non-PowerPC SoC
and most likely will not be in the future.

Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
 drivers/net/ethernet/freescale/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 6a7e8993119f..2bd7ace0a953 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -74,7 +74,7 @@ config FSL_XGMAC_MDIO
 
 config UCC_GETH
 	tristate "Freescale QE Gigabit Ethernet"
-	depends on QUICC_ENGINE
+	depends on QUICC_ENGINE && PPC32
 	select FSL_PQ_MDIO
 	select PHYLIB
 	---help---
-- 
2.23.0

RE: [PATCH v6 44/49] net/wan/fsl_ucc_hdlc: avoid use of IS_ERR_VALUE()

[Leo Li]

> -----Original Message-----
> From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
> Sent: Thursday, November 28, 2019 8:56 AM
> To: Qiang Zhao <qiang.zhao@nxp.com>; Leo Li <leoyang.li@nxp.com>;
> Christophe Leroy <christophe.leroy@c-s.fr>
> Cc: linuxppc-dev@lists.ozlabs.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; Scott Wood <oss@buserror.net>; Timur Tabi
> <timur@kernel.org>; Rasmus Villemoes <linux@rasmusvillemoes.dk>;
> netdev@vger.kernel.org
> Subject: [PATCH v6 44/49] net/wan/fsl_ucc_hdlc: avoid use of
> IS_ERR_VALUE()

Hi David,

Would you help to review patch 44-47 in the series?  If it is fine with you, I can take these 4 patches with the whole series though soc tree to enable the QE drivers on ARM and PPC64 with your ACK.

Thanks,
Leo

> 
> When building this on a 64-bit platform gcc rightly warns that the error
> checking is broken (-ENOMEM stored in an u32 does not compare greater
> than (unsigned long)-MAX_ERRNO). Instead, now that
> qe_muram_alloc() returns s32, use that type to store the return value and
> use standard kernel style "ret < 0".
> 
> Reviewed-by: Timur Tabi <timur@kernel.org>
> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>

Re: [PATCH v6 44/49] net/wan/fsl_ucc_hdlc: avoid use of IS_ERR_VALUE()

[David Miller]

From: Leo Li <leoyang.li@nxp.com>
Date: Mon, 2 Dec 2019 22:51:57 +0000

> 
> 
>> -----Original Message-----
>> From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
>> Sent: Thursday, November 28, 2019 8:56 AM
>> To: Qiang Zhao <qiang.zhao@nxp.com>; Leo Li <leoyang.li@nxp.com>;
>> Christophe Leroy <christophe.leroy@c-s.fr>
>> Cc: linuxppc-dev@lists.ozlabs.org; linux-arm-kernel@lists.infradead.org;
>> linux-kernel@vger.kernel.org; Scott Wood <oss@buserror.net>; Timur Tabi
>> <timur@kernel.org>; Rasmus Villemoes <linux@rasmusvillemoes.dk>;
>> netdev@vger.kernel.org
>> Subject: [PATCH v6 44/49] net/wan/fsl_ucc_hdlc: avoid use of
>> IS_ERR_VALUE()
> 
> Hi David,
> 
> Would you help to review patch 44-47 in the series?  If it is fine with you, I can take these 4 patches with the whole series though soc tree to enable the QE drivers on ARM and PPC64 with your ACK.

Please take it via your tree, that's fine.