* [PATCH v3 net] net: macb: fix for fixed-link mode
@ 2020-01-13 3:30 Milind Parab
2020-01-13 8:50 ` Claudiu.Beznea
2020-01-14 2:42 ` Jakub Kicinski
0 siblings, 2 replies; 3+ messages in thread
From: Milind Parab @ 2020-01-13 3:30 UTC (permalink / raw)
To: nicolas.ferre, jakub.kicinski, andrew, antoine.tenart, rmk+kernel
Cc: Claudiu.Beznea, f.fainelli, davem, netdev, hkallweit1,
linux-kernel, dkangude, a.fatoum, brad.mouring, pthombar,
Milind Parab
This patch fix the issue with fixed link. With fixed-link
device opening fails due to macb_phylink_connect not
handling fixed-link mode, in which case no MAC-PHY connection
is needed and phylink_connect return success (0), however
in current driver attempt is made to search and connect to
PHY even for fixed-link.
Fixes: 7897b071ac3b ("net: macb: convert to phylink")
Signed-off-by: Milind Parab <mparab@cadence.com>
---
Changes in v2:
1. Code refactoring to remove extra if condition
Changes in v3:
1. Reverse christmas tree ordering of local variables
---
drivers/net/ethernet/cadence/macb_main.c | 30 ++++++++++++++----------
1 file changed, 17 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 1c547ee0d444..7a2fe63d1136 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -650,21 +650,24 @@ static const struct phylink_mac_ops macb_phylink_ops = {
.mac_link_up = macb_mac_link_up,
};
+static bool macb_phy_handle_exists(struct device_node *dn)
+{
+ dn = of_parse_phandle(dn, "phy-handle", 0);
+ of_node_put(dn);
+ return dn != NULL;
+}
+
static int macb_phylink_connect(struct macb *bp)
{
+ struct device_node *dn = bp->pdev->dev.of_node;
struct net_device *dev = bp->dev;
struct phy_device *phydev;
int ret;
- if (bp->pdev->dev.of_node &&
- of_parse_phandle(bp->pdev->dev.of_node, "phy-handle", 0)) {
- ret = phylink_of_phy_connect(bp->phylink, bp->pdev->dev.of_node,
- 0);
- if (ret) {
- netdev_err(dev, "Could not attach PHY (%d)\n", ret);
- return ret;
- }
- } else {
+ if (dn)
+ ret = phylink_of_phy_connect(bp->phylink, dn, 0);
+
+ if (!dn || (ret && !macb_phy_handle_exists(dn))) {
phydev = phy_find_first(bp->mii_bus);
if (!phydev) {
netdev_err(dev, "no PHY found\n");
@@ -673,10 +676,11 @@ static int macb_phylink_connect(struct macb *bp)
/* attach the mac to the phy */
ret = phylink_connect_phy(bp->phylink, phydev);
- if (ret) {
- netdev_err(dev, "Could not attach to PHY (%d)\n", ret);
- return ret;
- }
+ }
+
+ if (ret) {
+ netdev_err(dev, "Could not attach PHY (%d)\n", ret);
+ return ret;
}
phylink_start(bp->phylink);
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3 net] net: macb: fix for fixed-link mode
2020-01-13 3:30 [PATCH v3 net] net: macb: fix for fixed-link mode Milind Parab
@ 2020-01-13 8:50 ` Claudiu.Beznea
2020-01-14 2:42 ` Jakub Kicinski
1 sibling, 0 replies; 3+ messages in thread
From: Claudiu.Beznea @ 2020-01-13 8:50 UTC (permalink / raw)
To: mparab, Nicolas.Ferre, jakub.kicinski, andrew, antoine.tenart,
rmk+kernel
Cc: f.fainelli, davem, netdev, hkallweit1, linux-kernel, dkangude,
a.fatoum, brad.mouring, pthombar
On 13.01.2020 05:30, Milind Parab wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> This patch fix the issue with fixed link. With fixed-link
> device opening fails due to macb_phylink_connect not
> handling fixed-link mode, in which case no MAC-PHY connection
> is needed and phylink_connect return success (0), however
> in current driver attempt is made to search and connect to
> PHY even for fixed-link.
>
> Fixes: 7897b071ac3b ("net: macb: convert to phylink")
> Signed-off-by: Milind Parab <mparab@cadence.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
> Changes in v2:
> 1. Code refactoring to remove extra if condition
>
> Changes in v3:
> 1. Reverse christmas tree ordering of local variables
> ---
> drivers/net/ethernet/cadence/macb_main.c | 30 ++++++++++++++----------
> 1 file changed, 17 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index 1c547ee0d444..7a2fe63d1136 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -650,21 +650,24 @@ static const struct phylink_mac_ops macb_phylink_ops = {
> .mac_link_up = macb_mac_link_up,
> };
>
> +static bool macb_phy_handle_exists(struct device_node *dn)
> +{
> + dn = of_parse_phandle(dn, "phy-handle", 0);
> + of_node_put(dn);
> + return dn != NULL;
> +}
> +
> static int macb_phylink_connect(struct macb *bp)
> {
> + struct device_node *dn = bp->pdev->dev.of_node;
> struct net_device *dev = bp->dev;
> struct phy_device *phydev;
> int ret;
>
> - if (bp->pdev->dev.of_node &&
> - of_parse_phandle(bp->pdev->dev.of_node, "phy-handle", 0)) {
> - ret = phylink_of_phy_connect(bp->phylink, bp->pdev->dev.of_node,
> - 0);
> - if (ret) {
> - netdev_err(dev, "Could not attach PHY (%d)\n", ret);
> - return ret;
> - }
> - } else {
> + if (dn)
> + ret = phylink_of_phy_connect(bp->phylink, dn, 0);
> +
> + if (!dn || (ret && !macb_phy_handle_exists(dn))) {
> phydev = phy_find_first(bp->mii_bus);
> if (!phydev) {
> netdev_err(dev, "no PHY found\n");
> @@ -673,10 +676,11 @@ static int macb_phylink_connect(struct macb *bp)
>
> /* attach the mac to the phy */
> ret = phylink_connect_phy(bp->phylink, phydev);
> - if (ret) {
> - netdev_err(dev, "Could not attach to PHY (%d)\n", ret);
> - return ret;
> - }
> + }
> +
> + if (ret) {
> + netdev_err(dev, "Could not attach PHY (%d)\n", ret);
> + return ret;
> }
>
> phylink_start(bp->phylink);
> --
> 2.17.1
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v3 net] net: macb: fix for fixed-link mode
2020-01-13 3:30 [PATCH v3 net] net: macb: fix for fixed-link mode Milind Parab
2020-01-13 8:50 ` Claudiu.Beznea
@ 2020-01-14 2:42 ` Jakub Kicinski
1 sibling, 0 replies; 3+ messages in thread
From: Jakub Kicinski @ 2020-01-14 2:42 UTC (permalink / raw)
To: Milind Parab
Cc: nicolas.ferre, andrew, antoine.tenart, rmk+kernel,
Claudiu.Beznea, f.fainelli, davem, netdev, hkallweit1,
linux-kernel, dkangude, a.fatoum, brad.mouring, pthombar
On Mon, 13 Jan 2020 03:30:43 +0000, Milind Parab wrote:
> This patch fix the issue with fixed link. With fixed-link
> device opening fails due to macb_phylink_connect not
> handling fixed-link mode, in which case no MAC-PHY connection
> is needed and phylink_connect return success (0), however
> in current driver attempt is made to search and connect to
> PHY even for fixed-link.
>
> Fixes: 7897b071ac3b ("net: macb: convert to phylink")
> Signed-off-by: Milind Parab <mparab@cadence.com>
Applied, thank you!
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-01-14 2:42 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-13 3:30 [PATCH v3 net] net: macb: fix for fixed-link mode Milind Parab
2020-01-13 8:50 ` Claudiu.Beznea
2020-01-14 2:42 ` Jakub Kicinski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).