[PATCH] net: stmmac: modified pcs mode support for RGMII

[PATCH] net: stmmac: modified pcs mode support for RGMII

[Dejin Zheng]

snps databook noted that physical coding sublayer (PCS) interface
that can be used when the MAC is configured for the TBI, RTBI, or
SGMII PHY interface. we have RGMII and SGMII in a SoC and it also
has the PCS block. it needs stmmac_init_phy and stmmac_mdio_register
function for initializing phy when it used RGMII interface.

Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c   | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 6f51a265459d..9778e7e0c005 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -387,9 +387,8 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
 	/* Using PCS we cannot dial with the phy registers at this stage
 	 * so we do not support extra feature like EEE.
 	 */
-	if ((priv->hw->pcs == STMMAC_PCS_RGMII) ||
-	    (priv->hw->pcs == STMMAC_PCS_TBI) ||
-	    (priv->hw->pcs == STMMAC_PCS_RTBI))
+	if (priv->hw->pcs == STMMAC_PCS_TBI ||
+	    priv->hw->pcs == STMMAC_PCS_RTBI)
 		return false;
 
 	/* Check if MAC core supports the EEE feature. */
@@ -2652,8 +2651,7 @@ static int stmmac_open(struct net_device *dev)
 	u32 chan;
 	int ret;
 
-	if (priv->hw->pcs != STMMAC_PCS_RGMII &&
-	    priv->hw->pcs != STMMAC_PCS_TBI &&
+	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI) {
 		ret = stmmac_init_phy(dev);
 		if (ret) {
@@ -4725,8 +4723,7 @@ int stmmac_dvr_probe(struct device *device,
 
 	stmmac_check_pcs_mode(priv);
 
-	if (priv->hw->pcs != STMMAC_PCS_RGMII  &&
-	    priv->hw->pcs != STMMAC_PCS_TBI &&
+	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI) {
 		/* MDIO bus Registration */
 		ret = stmmac_mdio_register(ndev);
@@ -4760,8 +4757,7 @@ int stmmac_dvr_probe(struct device *device,
 error_netdev_register:
 	phylink_destroy(priv->phylink);
 error_phy_setup:
-	if (priv->hw->pcs != STMMAC_PCS_RGMII &&
-	    priv->hw->pcs != STMMAC_PCS_TBI &&
+	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
 error_mdio_register:
@@ -4806,8 +4802,7 @@ int stmmac_dvr_remove(struct device *dev)
 		reset_control_assert(priv->plat->stmmac_rst);
 	clk_disable_unprepare(priv->plat->pclk);
 	clk_disable_unprepare(priv->plat->stmmac_clk);
-	if (priv->hw->pcs != STMMAC_PCS_RGMII &&
-	    priv->hw->pcs != STMMAC_PCS_TBI &&
+	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
 	destroy_workqueue(priv->wq);
-- 
2.17.1

Re: [PATCH] net: stmmac: modified pcs mode support for RGMII

[David Miller]

From: Dejin Zheng <zhengdejin5@gmail.com>
Date: Wed, 15 Jan 2020 23:53:23 +0800

> snps databook noted that physical coding sublayer (PCS) interface
> that can be used when the MAC is configured for the TBI, RTBI, or
> SGMII PHY interface. we have RGMII and SGMII in a SoC and it also
> has the PCS block. it needs stmmac_init_phy and stmmac_mdio_register
> function for initializing phy when it used RGMII interface.
> 
> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>

Applied to net-next, thank you.