[PATCH 0/7] octeontx2: Flow control support and other misc changes

[PATCH 0/7] octeontx2: Flow control support and other misc changes

[sunil.kovvuri]

From: Sunil Goutham <sgoutham@marvell.com>

This patch series adds flow control support (802.3 pause frames) and
has other changes wrt generic admin function (AF) driver functionality.

Geetha sowjanya (3):
  octeontx2-af: Interface backpressure configuration
  octeontx2-af: Pause frame configuration at cgx
  octeontx2-pf: Support to enable/disable pause frames via ethtool

Linu Cherian (1):
  octeontx2-af: Optimize data retrieval from firmware

Sunil Goutham (3):
  octeontx2-af: Set discovery ID for RVUM block
  octeontx2-af: Enable PCI master
  octeontx2-af: Modify rvu_reg_poll() to check reg atleast twice

 drivers/net/ethernet/marvell/octeontx2/af/cgx.c    | 174 ++++++++++++++-------
 drivers/net/ethernet/marvell/octeontx2/af/cgx.h    |  16 +-
 .../net/ethernet/marvell/octeontx2/af/cgx_fw_if.h  |   8 +-
 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |  38 ++++-
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c    | 165 ++++++++++++++++---
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h    |  30 ++++
 .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c    |  24 +++
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    | 156 +++++++++++++++++-
 .../net/ethernet/marvell/octeontx2/af/rvu_npa.c    |  13 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_npc.c    |   4 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_struct.h |   3 +
 .../ethernet/marvell/octeontx2/nic/otx2_common.c   |  65 ++++++++
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |   7 +
 .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c  |  41 +++++
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   |  12 ++
 15 files changed, 671 insertions(+), 85 deletions(-)

-- 
2.7.4

[PATCH 1/7] octeontx2-af: Interface backpressure configuration

[sunil.kovvuri]

From: Geetha sowjanya <gakula@marvell.com>

Each of the interface receive channels can be backpressured by
resources upon exhaustion or reaching configured threshold levels.
Resources here are receive buffer queues (Auras) and pkt notification
descriptor queues (CQs). Resources and interface channels are mapped
using backpressure IDs (BPIDs).

HW supports upto 512 BPIDs, this patch divides these BPIDs statically
across CGX/LBK/SDP interfaces as follows.
BPIDs 0 - 191 are mapped to LMAC channels, 16 per LMAC.
BPIDs 192 - 255 are mapped to LBK channels.
BPIDs 256 - 511 are mapped to SDP channels.
Also did the needed basic configuration of BPIDs.

Added mbox handlers with which a PF device can request for a BPID which
it will use to configure Auras and CQs.

Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |  24 +++-
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    | 151 ++++++++++++++++++++-
 .../net/ethernet/marvell/octeontx2/af/rvu_npa.c    |  13 +-
 3 files changed, 182 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index 8bbc1f1..a6ae7d9 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -125,7 +125,7 @@ static inline struct mbox_msghdr *otx2_mbox_alloc_msg(struct otx2_mbox *mbox,
 M(READY,		0x001, ready, msg_req, ready_msg_rsp)		\
 M(ATTACH_RESOURCES,	0x002, attach_resources, rsrc_attach, msg_rsp)	\
 M(DETACH_RESOURCES,	0x003, detach_resources, rsrc_detach, msg_rsp)	\
-M(MSIX_OFFSET,		0x004, msix_offset, msg_req, msix_offset_rsp)	\
+M(MSIX_OFFSET,		0x005, msix_offset, msg_req, msix_offset_rsp)	\
 M(VF_FLR,		0x006, vf_flr, msg_req, msg_rsp)		\
 M(GET_HW_CAP,		0x008, get_hw_cap, msg_req, get_hw_cap_rsp)	\
 /* CGX mbox IDs (range 0x200 - 0x3FF) */				\
@@ -211,6 +211,9 @@ M(NIX_LSO_FORMAT_CFG,	0x8011, nix_lso_format_cfg,			\
 				 nix_lso_format_cfg,			\
 				 nix_lso_format_cfg_rsp)		\
 M(NIX_RXVLAN_ALLOC,	0x8012, nix_rxvlan_alloc, msg_req, msg_rsp)	\
+M(NIX_BP_ENABLE,	0x8016, nix_bp_enable, nix_bp_cfg_req,	\
+				nix_bp_cfg_rsp)	\
+M(NIX_BP_DISABLE,	0x8017, nix_bp_disable, nix_bp_cfg_req, msg_rsp) \
 M(NIX_GET_MAC_ADDR, 0x8018, nix_get_mac_addr, msg_req, nix_get_mac_addr_rsp) \
 
 /* Messages initiated by AF (range 0xC00 - 0xDFF) */
@@ -676,6 +679,25 @@ struct nix_lso_format_cfg_rsp {
 	u8 lso_format_idx;
 };
 
+struct nix_bp_cfg_req {
+	struct mbox_msghdr hdr;
+	u16	chan_base; /* Starting channel number */
+	u8	chan_cnt; /* Number of channels */
+	u8	bpid_per_chan;
+	/* bpid_per_chan = 0 assigns single bp id for range of channels */
+	/* bpid_per_chan = 1 assigns separate bp id for each channel */
+};
+
+/* PF can be mapped to either CGX or LBK interface,
+ * so maximum 64 channels are possible.
+ */
+#define NIX_MAX_BPID_CHAN	64
+struct nix_bp_cfg_rsp {
+	struct mbox_msghdr hdr;
+	u16	chan_bpid[NIX_MAX_BPID_CHAN]; /* Channel and bpid mapping */
+	u8	chan_cnt; /* Number of channel for which bpids are assigned */
+};
+
 /* NPC mbox message structs */
 
 #define NPC_MCAM_ENTRY_INVALID	0xFFFF
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index a29e5c7..8c3ff63 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -18,6 +18,8 @@
 #include "cgx.h"
 
 static int nix_update_bcast_mce_list(struct rvu *rvu, u16 pcifunc, bool add);
+static int rvu_nix_get_bpid(struct rvu *rvu, struct nix_bp_cfg_req *req,
+			    int type, int chan_id);
 
 enum mc_tbl_sz {
 	MC_TBL_SZ_256,
@@ -273,6 +275,142 @@ static void nix_interface_deinit(struct rvu *rvu, u16 pcifunc, u8 nixlf)
 	rvu_npc_disable_mcam_entries(rvu, pcifunc, nixlf);
 }
 
+int rvu_mbox_handler_nix_bp_disable(struct rvu *rvu,
+				    struct nix_bp_cfg_req *req,
+				    struct msg_rsp *rsp)
+{
+	u16 pcifunc = req->hdr.pcifunc;
+	struct rvu_pfvf *pfvf;
+	int blkaddr, pf, type;
+	u16 chan_base, chan;
+	u64 cfg;
+
+	pf = rvu_get_pf(pcifunc);
+	type = is_afvf(pcifunc) ? NIX_INTF_TYPE_LBK : NIX_INTF_TYPE_CGX;
+	if (!is_pf_cgxmapped(rvu, pf) && type != NIX_INTF_TYPE_LBK)
+		return 0;
+
+	pfvf = rvu_get_pfvf(rvu, pcifunc);
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NIX, pcifunc);
+
+	chan_base = pfvf->rx_chan_base + req->chan_base;
+	for (chan = chan_base; chan < (chan_base + req->chan_cnt); chan++) {
+		cfg = rvu_read64(rvu, blkaddr, NIX_AF_RX_CHANX_CFG(chan));
+		rvu_write64(rvu, blkaddr, NIX_AF_RX_CHANX_CFG(chan),
+			    cfg & ~BIT_ULL(16));
+	}
+	return 0;
+}
+
+static int rvu_nix_get_bpid(struct rvu *rvu, struct nix_bp_cfg_req *req,
+			    int type, int chan_id)
+{
+	int bpid, blkaddr, lmac_chan_cnt;
+	struct rvu_hwinfo *hw = rvu->hw;
+	u16 cgx_bpid_cnt, lbk_bpid_cnt;
+	struct rvu_pfvf *pfvf;
+	u8 cgx_id, lmac_id;
+	u64 cfg;
+
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NIX, req->hdr.pcifunc);
+	cfg = rvu_read64(rvu, blkaddr, NIX_AF_CONST);
+	lmac_chan_cnt = cfg & 0xFF;
+
+	cgx_bpid_cnt = hw->cgx_links * lmac_chan_cnt;
+	lbk_bpid_cnt = hw->lbk_links * ((cfg >> 16) & 0xFF);
+
+	pfvf = rvu_get_pfvf(rvu, req->hdr.pcifunc);
+
+	/* Backpressure IDs range division
+	 * CGX channles are mapped to (0 - 191) BPIDs
+	 * LBK channles are mapped to (192 - 255) BPIDs
+	 * SDP channles are mapped to (256 - 511) BPIDs
+	 *
+	 * Lmac channles and bpids mapped as follows
+	 * cgx(0)_lmac(0)_chan(0 - 15) = bpid(0 - 15)
+	 * cgx(0)_lmac(1)_chan(0 - 15) = bpid(16 - 31) ....
+	 * cgx(1)_lmac(0)_chan(0 - 15) = bpid(64 - 79) ....
+	 */
+	switch (type) {
+	case NIX_INTF_TYPE_CGX:
+		if ((req->chan_base + req->chan_cnt) > 15)
+			return -EINVAL;
+		rvu_get_cgx_lmac_id(pfvf->cgx_lmac, &cgx_id, &lmac_id);
+		/* Assign bpid based on cgx, lmac and chan id */
+		bpid = (cgx_id * hw->lmac_per_cgx * lmac_chan_cnt) +
+			(lmac_id * lmac_chan_cnt) + req->chan_base;
+
+		if (req->bpid_per_chan)
+			bpid += chan_id;
+		if (bpid > cgx_bpid_cnt)
+			return -EINVAL;
+		break;
+
+	case NIX_INTF_TYPE_LBK:
+		if ((req->chan_base + req->chan_cnt) > 63)
+			return -EINVAL;
+		bpid = cgx_bpid_cnt + req->chan_base;
+		if (req->bpid_per_chan)
+			bpid += chan_id;
+		if (bpid > (cgx_bpid_cnt + lbk_bpid_cnt))
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return bpid;
+}
+
+int rvu_mbox_handler_nix_bp_enable(struct rvu *rvu,
+				   struct nix_bp_cfg_req *req,
+				   struct nix_bp_cfg_rsp *rsp)
+{
+	int blkaddr, pf, type, chan_id = 0;
+	u16 pcifunc = req->hdr.pcifunc;
+	struct rvu_pfvf *pfvf;
+	u16 chan_base, chan;
+	s16 bpid, bpid_base;
+	u64 cfg;
+
+	pf = rvu_get_pf(pcifunc);
+	type = is_afvf(pcifunc) ? NIX_INTF_TYPE_LBK : NIX_INTF_TYPE_CGX;
+
+	/* Enable backpressure only for CGX mapped PFs and LBK interface */
+	if (!is_pf_cgxmapped(rvu, pf) && type != NIX_INTF_TYPE_LBK)
+		return 0;
+
+	pfvf = rvu_get_pfvf(rvu, pcifunc);
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NIX, pcifunc);
+
+	bpid_base = rvu_nix_get_bpid(rvu, req, type, chan_id);
+	chan_base = pfvf->rx_chan_base + req->chan_base;
+	bpid = bpid_base;
+
+	for (chan = chan_base; chan < (chan_base + req->chan_cnt); chan++) {
+		if (bpid < 0) {
+			dev_warn(rvu->dev, "Fail to enable backpessure\n");
+			return -EINVAL;
+		}
+
+		cfg = rvu_read64(rvu, blkaddr, NIX_AF_RX_CHANX_CFG(chan));
+		rvu_write64(rvu, blkaddr, NIX_AF_RX_CHANX_CFG(chan),
+			    cfg | (bpid & 0xFF) | BIT_ULL(16));
+		chan_id++;
+		bpid = rvu_nix_get_bpid(rvu, req, type, chan_id);
+	}
+
+	for (chan = 0; chan < req->chan_cnt; chan++) {
+		/* Map channel and bpid assign to it */
+		rsp->chan_bpid[chan] = ((req->chan_base + chan) & 0x7F) << 10 |
+					(bpid_base & 0x3FF);
+		if (req->bpid_per_chan)
+			bpid_base++;
+	}
+	rsp->chan_cnt = req->chan_cnt;
+
+	return 0;
+}
+
 static void nix_setup_lso_tso_l3(struct rvu *rvu, int blkaddr,
 				 u64 format, bool v4, u64 *fidx)
 {
@@ -565,6 +703,11 @@ static int rvu_nix_aq_enq_inst(struct rvu *rvu, struct nix_aq_enq_req *req,
 	 */
 	inst.res_addr = (u64)aq->res->iova;
 
+	/* Hardware uses same aq->res->base for updating result of
+	 * previous instruction hence wait here till it is done.
+	 */
+	spin_lock(&aq->lock);
+
 	/* Clean result + context memory */
 	memset(aq->res->base, 0, aq->res->entry_sz);
 	/* Context needs to be written at RES_ADDR + 128 */
@@ -609,11 +752,10 @@ static int rvu_nix_aq_enq_inst(struct rvu *rvu, struct nix_aq_enq_req *req,
 		break;
 	default:
 		rc = NIX_AF_ERR_AQ_ENQUEUE;
+		spin_unlock(&aq->lock);
 		return rc;
 	}
 
-	spin_lock(&aq->lock);
-
 	/* Submit the instruction to AQ */
 	rc = nix_aq_enqueue_wait(rvu, block, &inst);
 	if (rc) {
@@ -718,6 +860,8 @@ static int nix_lf_hwctx_disable(struct rvu *rvu, struct hwctx_disable_req *req)
 	if (req->ctype == NIX_AQ_CTYPE_CQ) {
 		aq_req.cq.ena = 0;
 		aq_req.cq_mask.ena = 1;
+		aq_req.cq.bp_ena = 0;
+		aq_req.cq_mask.bp_ena = 1;
 		q_cnt = pfvf->cq_ctx->qsize;
 		bmap = pfvf->cq_bmap;
 	}
@@ -3061,6 +3205,9 @@ int rvu_nix_init(struct rvu *rvu)
 
 		/* Initialize CGX/LBK/SDP link credits, min/max pkt lengths */
 		nix_link_config(rvu, blkaddr);
+
+		/* Enable Channel backpressure */
+		rvu_write64(rvu, blkaddr, NIX_AF_RX_CFG, BIT_ULL(0));
 	}
 	return 0;
 }
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npa.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npa.c
index 6e7c7f4..67471cb 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npa.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npa.c
@@ -94,6 +94,11 @@ int rvu_npa_aq_enq_inst(struct rvu *rvu, struct npa_aq_enq_req *req,
 	 */
 	inst.res_addr = (u64)aq->res->iova;
 
+	/* Hardware uses same aq->res->base for updating result of
+	 * previous instruction hence wait here till it is done.
+	 */
+	spin_lock(&aq->lock);
+
 	/* Clean result + context memory */
 	memset(aq->res->base, 0, aq->res->entry_sz);
 	/* Context needs to be written at RES_ADDR + 128 */
@@ -138,10 +143,10 @@ int rvu_npa_aq_enq_inst(struct rvu *rvu, struct npa_aq_enq_req *req,
 		break;
 	}
 
-	if (rc)
+	if (rc) {
+		spin_unlock(&aq->lock);
 		return rc;
-
-	spin_lock(&aq->lock);
+	}
 
 	/* Submit the instruction to AQ */
 	rc = npa_aq_enqueue_wait(rvu, block, &inst);
@@ -218,6 +223,8 @@ static int npa_lf_hwctx_disable(struct rvu *rvu, struct hwctx_disable_req *req)
 	} else if (req->ctype == NPA_AQ_CTYPE_AURA) {
 		aq_req.aura.ena = 0;
 		aq_req.aura_mask.ena = 1;
+		aq_req.aura.bp_ena = 0;
+		aq_req.aura_mask.bp_ena = 1;
 		cnt = pfvf->aura_ctx->qsize;
 		bmap = pfvf->aura_bmap;
 	}
-- 
2.7.4

[PATCH 2/7] octeontx2-af: Pause frame configuration at cgx

[sunil.kovvuri]

From: Geetha sowjanya <gakula@marvell.com>

CGX LMAC, the physical interface can generate pause frames when
internal resources asserts backpressure due to exhaustion.

This patch configures CGX to generate 802.3 pause frames.
Also enabled processing of received pause frames on the line which
will assert backpressure on the internal transmit path.

Also added mailbox handlers for PF drivers to enable or disable
pause frames anytime.

Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/cgx.c    | 103 +++++++++++++++++++++
 drivers/net/ethernet/marvell/octeontx2/af/cgx.h    |  14 +++
 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |  11 +++
 .../net/ethernet/marvell/octeontx2/af/rvu_cgx.c    |  24 +++++
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    |   5 +
 5 files changed, 157 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index 9f5b722..fb1971c 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -367,6 +367,107 @@ int cgx_lmac_tx_enable(void *cgxd, int lmac_id, bool enable)
 	return !!(last & DATA_PKT_TX_EN);
 }
 
+int cgx_lmac_get_pause_frm(void *cgxd, int lmac_id,
+			   u8 *tx_pause, u8 *rx_pause)
+{
+	struct cgx *cgx = cgxd;
+	u64 cfg;
+
+	if (!cgx || lmac_id >= cgx->lmac_count)
+		return -ENODEV;
+
+	cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL);
+	*rx_pause = !!(cfg & CGX_SMUX_RX_FRM_CTL_CTL_BCK);
+
+	cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_TX_CTL);
+	*tx_pause = !!(cfg & CGX_SMUX_TX_CTL_L2P_BP_CONV);
+	return 0;
+}
+
+int cgx_lmac_set_pause_frm(void *cgxd, int lmac_id,
+			   u8 tx_pause, u8 rx_pause)
+{
+	struct cgx *cgx = cgxd;
+	u64 cfg;
+
+	if (!cgx || lmac_id >= cgx->lmac_count)
+		return -ENODEV;
+
+	cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL);
+	cfg &= ~CGX_SMUX_RX_FRM_CTL_CTL_BCK;
+	cfg |= rx_pause ? CGX_SMUX_RX_FRM_CTL_CTL_BCK : 0x0;
+	cgx_write(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL, cfg);
+
+	cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_TX_CTL);
+	cfg &= ~CGX_SMUX_TX_CTL_L2P_BP_CONV;
+	cfg |= tx_pause ? CGX_SMUX_TX_CTL_L2P_BP_CONV : 0x0;
+	cgx_write(cgx, lmac_id, CGXX_SMUX_TX_CTL, cfg);
+
+	cfg = cgx_read(cgx, 0, CGXX_CMR_RX_OVR_BP);
+	if (tx_pause) {
+		cfg &= ~CGX_CMR_RX_OVR_BP_EN(lmac_id);
+	} else {
+		cfg |= CGX_CMR_RX_OVR_BP_EN(lmac_id);
+		cfg &= ~CGX_CMR_RX_OVR_BP_BP(lmac_id);
+	}
+	cgx_write(cgx, 0, CGXX_CMR_RX_OVR_BP, cfg);
+	return 0;
+}
+
+static void cgx_lmac_pause_frm_config(struct cgx *cgx, int lmac_id, bool enable)
+{
+	u64 cfg;
+
+	if (!cgx || lmac_id >= cgx->lmac_count)
+		return;
+	if (enable) {
+		/* Enable receive pause frames */
+		cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL);
+		cfg |= CGX_SMUX_RX_FRM_CTL_CTL_BCK;
+		cgx_write(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL, cfg);
+
+		cfg = cgx_read(cgx, lmac_id, CGXX_GMP_GMI_RXX_FRM_CTL);
+		cfg |= CGX_GMP_GMI_RXX_FRM_CTL_CTL_BCK;
+		cgx_write(cgx, lmac_id, CGXX_GMP_GMI_RXX_FRM_CTL, cfg);
+
+		/* Enable pause frames transmission */
+		cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_TX_CTL);
+		cfg |= CGX_SMUX_TX_CTL_L2P_BP_CONV;
+		cgx_write(cgx, lmac_id, CGXX_SMUX_TX_CTL, cfg);
+
+		/* Set pause time and interval */
+		cgx_write(cgx, lmac_id, CGXX_SMUX_TX_PAUSE_PKT_TIME,
+			  DEFAULT_PAUSE_TIME);
+		cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_TX_PAUSE_PKT_INTERVAL);
+		cfg &= ~0xFFFFULL;
+		cgx_write(cgx, lmac_id, CGXX_SMUX_TX_PAUSE_PKT_INTERVAL,
+			  cfg | (DEFAULT_PAUSE_TIME / 2));
+
+		cgx_write(cgx, lmac_id, CGXX_GMP_GMI_TX_PAUSE_PKT_TIME,
+			  DEFAULT_PAUSE_TIME);
+
+		cfg = cgx_read(cgx, lmac_id,
+			       CGXX_GMP_GMI_TX_PAUSE_PKT_INTERVAL);
+		cfg &= ~0xFFFFULL;
+		cgx_write(cgx, lmac_id, CGXX_GMP_GMI_TX_PAUSE_PKT_INTERVAL,
+			  cfg | (DEFAULT_PAUSE_TIME / 2));
+	} else {
+		/* ALL pause frames received are completely ignored */
+		cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL);
+		cfg &= ~CGX_SMUX_RX_FRM_CTL_CTL_BCK;
+		cgx_write(cgx, lmac_id, CGXX_SMUX_RX_FRM_CTL, cfg);
+
+		cfg = cgx_read(cgx, lmac_id, CGXX_GMP_GMI_RXX_FRM_CTL);
+		cfg &= ~CGX_GMP_GMI_RXX_FRM_CTL_CTL_BCK;
+		cgx_write(cgx, lmac_id, CGXX_GMP_GMI_RXX_FRM_CTL, cfg);
+
+		/* Disable pause frames transmission */
+		cfg = cgx_read(cgx, lmac_id, CGXX_SMUX_TX_CTL);
+		cfg &= ~CGX_SMUX_TX_CTL_L2P_BP_CONV;
+		cgx_write(cgx, lmac_id, CGXX_SMUX_TX_CTL, cfg);
+	}
+}
+
 /* CGX Firmware interface low level support */
 static int cgx_fwi_cmd_send(u64 req, u64 *resp, struct lmac *lmac)
 {
@@ -787,6 +888,7 @@ static int cgx_lmac_init(struct cgx *cgx)
 
 		/* Add reference */
 		cgx->lmac_idmap[i] = lmac;
+		cgx_lmac_pause_frm_config(cgx, i, true);
 	}
 
 	return cgx_lmac_verify_fwi_version(cgx);
@@ -805,6 +907,7 @@ static int cgx_lmac_exit(struct cgx *cgx)
 
 	/* Free all lmac related resources */
 	for (i = 0; i < cgx->lmac_count; i++) {
+		cgx_lmac_pause_frm_config(cgx, i, false);
 		lmac = cgx->lmac_idmap[i];
 		if (!lmac)
 			continue;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
index 9343bf3..115f5ec 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
@@ -60,10 +60,20 @@
 #define CGX_SMUX_RX_FRM_CTL_CTL_BCK	BIT_ULL(3)
 #define CGXX_GMP_GMI_RXX_FRM_CTL	0x38028
 #define CGX_GMP_GMI_RXX_FRM_CTL_CTL_BCK	BIT_ULL(3)
+#define CGXX_SMUX_TX_CTL		0x20178
+#define CGXX_SMUX_TX_PAUSE_PKT_TIME	0x20110
+#define CGXX_SMUX_TX_PAUSE_PKT_INTERVAL	0x20120
+#define CGXX_GMP_GMI_TX_PAUSE_PKT_TIME	0x38230
+#define CGXX_GMP_GMI_TX_PAUSE_PKT_INTERVAL	0x38248
+#define CGX_SMUX_TX_CTL_L2P_BP_CONV	BIT_ULL(7)
+#define CGXX_CMR_RX_OVR_BP		0x130
+#define CGX_CMR_RX_OVR_BP_EN(X)		BIT_ULL(((X) + 8))
+#define CGX_CMR_RX_OVR_BP_BP(X)		BIT_ULL(((X) + 4))
 
 #define CGX_COMMAND_REG			CGXX_SCRATCH1_REG
 #define CGX_EVENT_REG			CGXX_SCRATCH0_REG
 #define CGX_CMD_TIMEOUT			2200 /* msecs */
+#define DEFAULT_PAUSE_TIME		0x7FF
 
 #define CGX_NVEC			37
 #define CGX_LMAC_FWI			0
@@ -124,5 +134,9 @@ int cgx_lmac_internal_loopback(void *cgxd, int lmac_id, bool enable);
 int cgx_get_link_info(void *cgxd, int lmac_id,
 		      struct cgx_link_user_info *linfo);
 int cgx_lmac_linkup_start(void *cgxd);
+int cgx_lmac_get_pause_frm(void *cgxd, int lmac_id,
+			   u8 *tx_pause, u8 *rx_pause);
+int cgx_lmac_set_pause_frm(void *cgxd, int lmac_id,
+			   u8 tx_pause, u8 rx_pause);
 int cgx_get_mkex_prfl_info(u64 *addr, u64 *size);
 #endif /* CGX_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index a6ae7d9..b2a6bee 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -143,6 +143,8 @@ M(CGX_STOP_LINKEVENTS,	0x208, cgx_stop_linkevents, msg_req, msg_rsp)	\
 M(CGX_GET_LINKINFO,	0x209, cgx_get_linkinfo, msg_req, cgx_link_info_msg) \
 M(CGX_INTLBK_ENABLE,	0x20A, cgx_intlbk_enable, msg_req, msg_rsp)	\
 M(CGX_INTLBK_DISABLE,	0x20B, cgx_intlbk_disable, msg_req, msg_rsp)	\
+M(CGX_CFG_PAUSE_FRM,	0x20E, cgx_cfg_pause_frm, cgx_pause_frm_cfg,	\
+			       cgx_pause_frm_cfg)			\
 /* NPA mbox IDs (range 0x400 - 0x5FF) */				\
 M(NPA_LF_ALLOC,		0x400, npa_lf_alloc,				\
 				npa_lf_alloc_req, npa_lf_alloc_rsp)	\
@@ -345,6 +347,15 @@ struct cgx_link_info_msg {
 	struct cgx_link_user_info link_info;
 };
 
+struct cgx_pause_frm_cfg {
+	struct mbox_msghdr hdr;
+	u8 set;
+	/* set = 1 if the request is to config pause frames */
+	/* set = 0 if the request is to fetch pause frames config */
+	u8 rx_pause;
+	u8 tx_pause;
+};
+
 /* NPA mbox message formats */
 
 /* NPA mailbox error codes
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
index b8e8f33..f3c82e4 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
@@ -590,6 +590,30 @@ int rvu_mbox_handler_cgx_intlbk_disable(struct rvu *rvu, struct msg_req *req,
 	return 0;
 }
 
+int rvu_mbox_handler_cgx_cfg_pause_frm(struct rvu *rvu,
+				       struct cgx_pause_frm_cfg *req,
+				       struct cgx_pause_frm_cfg *rsp)
+{
+	int pf = rvu_get_pf(req->hdr.pcifunc);
+	u8 cgx_id, lmac_id;
+
+	/* This msg is expected only from PF/VFs that are mapped to CGX LMACs,
+	 * if received from other PF/VF simply ACK, nothing to do.
+	 */
+	if (!is_pf_cgxmapped(rvu, pf))
+		return -ENODEV;
+
+	rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id);
+
+	if (req->set)
+		cgx_lmac_set_pause_frm(rvu_cgx_pdata(cgx_id, rvu), lmac_id,
+				       req->tx_pause, req->rx_pause);
+	else
+		cgx_lmac_get_pause_frm(rvu_cgx_pdata(cgx_id, rvu), lmac_id,
+				       &rsp->tx_pause, &rsp->rx_pause);
+	return 0;
+}
+
 /* Finds cumulative status of NIX rx/tx counters from LF of a PF and those
  * from its VFs as well. ie. NIX rx/tx counters at the CGX port level
  */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 8c3ff63..80b1e39 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -213,6 +213,11 @@ static int nix_interface_init(struct rvu *rvu, u16 pcifunc, int type, int nixlf)
 		pfvf->tx_chan_cnt = 1;
 		cgx_set_pkind(rvu_cgx_pdata(cgx_id, rvu), lmac_id, pkind);
 		rvu_npc_set_pkind(rvu, pkind, pfvf);
+
+		/* By default we enable pause frames */
+		if ((pcifunc & RVU_PFVF_FUNC_MASK) == 0)
+			cgx_lmac_set_pause_frm(rvu_cgx_pdata(cgx_id, rvu),
+					       lmac_id, true, true);
 		break;
 	case NIX_INTF_TYPE_LBK:
 		vf = (pcifunc & RVU_PFVF_FUNC_MASK) - 1;
-- 
2.7.4

[PATCH 3/7] octeontx2-pf: Support to enable/disable pause frames via ethtool

[sunil.kovvuri]

From: Geetha sowjanya <gakula@marvell.com>

Added mailbox requests to retrieve backpressure IDs from AF and Aura,
CQ contexts are configured with these BPIDs. So that when resource
levels reach configured thresholds they assert backpressure on the
interface which is also mapped to same BPID.

Also added support to enable/disable pause frames generation via ethtool.

Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 .../ethernet/marvell/octeontx2/nic/otx2_common.c   | 65 ++++++++++++++++++++++
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |  7 +++
 .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c  | 41 ++++++++++++++
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   | 12 ++++
 4 files changed, 125 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
index b945bd3..af4437d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
@@ -220,6 +220,25 @@ int otx2_hw_set_mtu(struct otx2_nic *pfvf, int mtu)
 	return err;
 }
 
+int otx2_config_pause_frm(struct otx2_nic *pfvf)
+{
+	struct cgx_pause_frm_cfg *req;
+	int err;
+
+	otx2_mbox_lock(&pfvf->mbox);
+	req = otx2_mbox_alloc_msg_cgx_cfg_pause_frm(&pfvf->mbox);
+	if (!req)
+		return -ENOMEM;
+
+	req->rx_pause = !!(pfvf->flags & OTX2_FLAG_RX_PAUSE_ENABLED);
+	req->tx_pause = !!(pfvf->flags & OTX2_FLAG_TX_PAUSE_ENABLED);
+	req->set = 1;
+
+	err = otx2_sync_mbox_msg(&pfvf->mbox);
+	otx2_mbox_unlock(&pfvf->mbox);
+	return err;
+}
+
 int otx2_set_flowkey_cfg(struct otx2_nic *pfvf)
 {
 	struct otx2_rss_info *rss = &pfvf->hw.rss_info;
@@ -580,6 +599,7 @@ void otx2_sqb_flush(struct otx2_nic *pfvf)
  * RED accepts pkts if free pointers > 102 & <= 205.
  * Drops pkts if free pointers < 102.
  */
+#define RQ_BP_LVL_AURA   (255 - ((85 * 256) / 100)) /* BP when 85% is full */
 #define RQ_PASS_LVL_AURA (255 - ((95 * 256) / 100)) /* RED when 95% is full */
 #define RQ_DROP_LVL_AURA (255 - ((99 * 256) / 100)) /* Drop when 99% is full */
 
@@ -741,6 +761,13 @@ static int otx2_cq_init(struct otx2_nic *pfvf, u16 qidx)
 	if (qidx < pfvf->hw.rx_queues) {
 		aq->cq.drop = RQ_DROP_LVL_CQ(pfvf->hw.rq_skid, cq->cqe_cnt);
 		aq->cq.drop_ena = 1;
+
+		/* Enable receive CQ backpressure */
+		aq->cq.bp_ena = 1;
+		aq->cq.bpid = pfvf->bpid[0];
+
+		/* Set backpressure level is same as cq pass level */
+		aq->cq.bp = RQ_PASS_LVL_CQ(pfvf->hw.rq_skid, qset->rqe_cnt);
 	}
 
 	/* Fill AQ info */
@@ -996,6 +1023,14 @@ static int otx2_aura_init(struct otx2_nic *pfvf, int aura_id,
 	aq->aura.fc_addr = pool->fc_addr->iova;
 	aq->aura.fc_hyst_bits = 0; /* Store count on all updates */
 
+	/* Enable backpressure for RQ aura */
+	if (aura_id < pfvf->hw.rqpool_cnt) {
+		aq->aura.bp_ena = 0;
+		aq->aura.nix0_bpid = pfvf->bpid[0];
+		/* Set backpressure level for RQ's Aura */
+		aq->aura.bp = RQ_BP_LVL_AURA;
+	}
+
 	/* Fill AQ info */
 	aq->ctype = NPA_AQ_CTYPE_AURA;
 	aq->op = NPA_AQ_INSTOP_INIT;
@@ -1307,6 +1342,25 @@ void otx2_ctx_disable(struct mbox *mbox, int type, bool npa)
 	otx2_mbox_unlock(mbox);
 }
 
+int otx2_nix_config_bp(struct otx2_nic *pfvf, bool enable)
+{
+	struct nix_bp_cfg_req *req;
+
+	if (enable)
+		req = otx2_mbox_alloc_msg_nix_bp_enable(&pfvf->mbox);
+	else
+		req = otx2_mbox_alloc_msg_nix_bp_disable(&pfvf->mbox);
+
+	if (!req)
+		return -ENOMEM;
+
+	req->chan_base = 0;
+	req->chan_cnt = 1;
+	req->bpid_per_chan = 0;
+
+	return otx2_sync_mbox_msg(&pfvf->mbox);
+}
+
 /* Mbox message handlers */
 void mbox_handler_cgx_stats(struct otx2_nic *pfvf,
 			    struct cgx_stats_rsp *rsp)
@@ -1355,6 +1409,17 @@ void mbox_handler_msix_offset(struct otx2_nic *pfvf,
 	pfvf->hw.nix_msixoff = rsp->nix_msixoff;
 }
 
+void mbox_handler_nix_bp_enable(struct otx2_nic *pfvf,
+				struct nix_bp_cfg_rsp *rsp)
+{
+	int chan, chan_id;
+
+	for (chan = 0; chan < rsp->chan_cnt; chan++) {
+		chan_id = ((rsp->chan_bpid[chan] >> 10) & 0x7F);
+		pfvf->bpid[chan_id] = rsp->chan_bpid[chan] & 0x3FF;
+	}
+}
+
 void otx2_free_cints(struct otx2_nic *pfvf, int n)
 {
 	struct otx2_qset *qset = &pfvf->qset;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index 320f3b7..885c3dc 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -204,6 +204,8 @@ struct otx2_nic {
 	u16			rbsize; /* Receive buffer size */
 
 #define OTX2_FLAG_INTF_DOWN			BIT_ULL(2)
+#define OTX2_FLAG_RX_PAUSE_ENABLED		BIT_ULL(9)
+#define OTX2_FLAG_TX_PAUSE_ENABLED		BIT_ULL(10)
 	u64			flags;
 
 	struct otx2_qset	qset;
@@ -216,6 +218,7 @@ struct otx2_nic {
 	struct workqueue_struct *mbox_wq;
 
 	u16			pcifunc; /* RVU PF_FUNC */
+	u16			bpid[NIX_MAX_BPID_CHAN];
 	struct cgx_link_user_info linfo;
 
 	u64			reset_count;
@@ -558,6 +561,7 @@ int otx2_hw_set_mtu(struct otx2_nic *pfvf, int mtu);
 void otx2_tx_timeout(struct net_device *netdev, unsigned int txq);
 void otx2_get_mac_from_af(struct net_device *netdev);
 void otx2_config_irq_coalescing(struct otx2_nic *pfvf, int qidx);
+int otx2_config_pause_frm(struct otx2_nic *pfvf);
 
 /* RVU block related APIs */
 int otx2_attach_npa_nix(struct otx2_nic *pfvf);
@@ -578,6 +582,7 @@ dma_addr_t otx2_alloc_rbuf(struct otx2_nic *pfvf, struct otx2_pool *pool,
 			   gfp_t gfp);
 int otx2_rxtx_enable(struct otx2_nic *pfvf, bool enable);
 void otx2_ctx_disable(struct mbox *mbox, int type, bool npa);
+int otx2_nix_config_bp(struct otx2_nic *pfvf, bool enable);
 void otx2_cleanup_rx_cqes(struct otx2_nic *pfvf, struct otx2_cq_queue *cq);
 void otx2_cleanup_tx_cqes(struct otx2_nic *pfvf, struct otx2_cq_queue *cq);
 
@@ -598,6 +603,8 @@ void mbox_handler_nix_txsch_alloc(struct otx2_nic *pf,
 				  struct nix_txsch_alloc_rsp *rsp);
 void mbox_handler_cgx_stats(struct otx2_nic *pfvf,
 			    struct cgx_stats_rsp *rsp);
+void mbox_handler_nix_bp_enable(struct otx2_nic *pfvf,
+				struct nix_bp_cfg_rsp *rsp);
 
 /* Device stats APIs */
 void otx2_get_dev_stats(struct otx2_nic *pfvf);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index 60fcf82..f450111 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
@@ -253,6 +253,45 @@ static int otx2_set_channels(struct net_device *dev,
 	return err;
 }
 
+static void otx2_get_pauseparam(struct net_device *netdev,
+				struct ethtool_pauseparam *pause)
+{
+	struct otx2_nic *pfvf = netdev_priv(netdev);
+	struct cgx_pause_frm_cfg *req, *rsp;
+
+	req = otx2_mbox_alloc_msg_cgx_cfg_pause_frm(&pfvf->mbox);
+	if (!req)
+		return;
+
+	if (!otx2_sync_mbox_msg(&pfvf->mbox)) {
+		rsp = (struct cgx_pause_frm_cfg *)
+		       otx2_mbox_get_rsp(&pfvf->mbox.mbox, 0, &req->hdr);
+		pause->rx_pause = rsp->rx_pause;
+		pause->tx_pause = rsp->tx_pause;
+	}
+}
+
+static int otx2_set_pauseparam(struct net_device *netdev,
+			       struct ethtool_pauseparam *pause)
+{
+	struct otx2_nic *pfvf = netdev_priv(netdev);
+
+	if (pause->autoneg)
+		return -EOPNOTSUPP;
+
+	if (pause->rx_pause)
+		pfvf->flags |= OTX2_FLAG_RX_PAUSE_ENABLED;
+	else
+		pfvf->flags &= ~OTX2_FLAG_RX_PAUSE_ENABLED;
+
+	if (pause->tx_pause)
+		pfvf->flags |= OTX2_FLAG_TX_PAUSE_ENABLED;
+	else
+		pfvf->flags &= ~OTX2_FLAG_TX_PAUSE_ENABLED;
+
+	return otx2_config_pause_frm(pfvf);
+}
+
 static void otx2_get_ringparam(struct net_device *netdev,
 			       struct ethtool_ringparam *ring)
 {
@@ -654,6 +693,8 @@ static const struct ethtool_ops otx2_ethtool_ops = {
 	.set_rxfh		= otx2_set_rxfh,
 	.get_msglevel		= otx2_get_msglevel,
 	.set_msglevel		= otx2_set_msglevel,
+	.get_pauseparam		= otx2_get_pauseparam,
+	.set_pauseparam		= otx2_set_pauseparam,
 };
 
 void otx2_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 85f9b9b..22f9a32 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -148,6 +148,9 @@ static void otx2_process_pfaf_mbox_msg(struct otx2_nic *pf,
 		mbox_handler_nix_txsch_alloc(pf,
 					     (struct nix_txsch_alloc_rsp *)msg);
 		break;
+	case MBOX_MSG_NIX_BP_ENABLE:
+		mbox_handler_nix_bp_enable(pf, (struct nix_bp_cfg_rsp *)msg);
+		break;
 	case MBOX_MSG_CGX_STATS:
 		mbox_handler_cgx_stats(pf, (struct cgx_stats_rsp *)msg);
 		break;
@@ -654,6 +657,9 @@ static int otx2_init_hw_resources(struct otx2_nic *pf)
 	if (err)
 		goto err_free_npa_lf;
 
+	/* Enable backpressure */
+	otx2_nix_config_bp(pf, true);
+
 	/* Init Auras and pools used by NIX RQ, for free buffer ptrs */
 	err = otx2_rq_aura_pool_init(pf);
 	if (err) {
@@ -737,6 +743,12 @@ static void otx2_free_hw_resources(struct otx2_nic *pf)
 	if (err)
 		dev_err(pf->dev, "RVUPF: Failed to stop/free TX schedulers\n");
 
+	otx2_mbox_lock(mbox);
+	/* Disable backpressure */
+	if (!(pf->pcifunc & RVU_PFVF_FUNC_MASK))
+		otx2_nix_config_bp(pf, false);
+	otx2_mbox_unlock(mbox);
+
 	/* Disable RQs */
 	otx2_ctx_disable(mbox, NIX_AQ_CTYPE_RQ, false);
 
-- 
2.7.4

[PATCH 4/7] octeontx2-af: Optimize data retrieval from firmware

[sunil.kovvuri]

From: Linu Cherian <lcherian@marvell.com>

For retrieving info like interface MAC addresses, packet
parser key extraction config etc currently a command
is sent to firmware and firmware which periodically polls
for commands, processes these and returns the info.

This is resulting in interface initialization taking lot
of time. To optimize this a memory region is shared between
firmware and this driver, firmware while booting puts
static info like these into that region for driver to
read directly without using commands.

With this
- Logic for retrieving packet parser extraction config
  via commands is removed and repalced with using the
  shared 'fwdata' structure.
- Now RVU MSIX vector address is also retrieved from this fwdata struct
  instead of from CSR. Otherwise when kexec/kdump crash kernel loads
  CSR will have a IOVA setup by primary kernel which impacts
  RVU PF/VF's interrupts.
- Also added a mbox handler for PF/VF interfaces to retrieve their MAC
  addresses from AF.

Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/cgx.c    |  71 ++++--------
 drivers/net/ethernet/marvell/octeontx2/af/cgx.h    |   2 +-
 .../net/ethernet/marvell/octeontx2/af/cgx_fw_if.h  |   8 +-
 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |   3 +-
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c    | 120 +++++++++++++++++++--
 drivers/net/ethernet/marvell/octeontx2/af/rvu.h    |  30 ++++++
 .../net/ethernet/marvell/octeontx2/af/rvu_npc.c    |   4 +-
 7 files changed, 173 insertions(+), 65 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index fb1971c..a4e65da 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -645,59 +645,6 @@ static inline bool cgx_event_is_linkevent(u64 event)
 		return false;
 }
 
-static inline int cgx_fwi_get_mkex_prfl_sz(u64 *prfl_sz,
-					   struct cgx *cgx)
-{
-	u64 req = 0;
-	u64 resp;
-	int err;
-
-	req = FIELD_SET(CMDREG_ID, CGX_CMD_GET_MKEX_PRFL_SIZE, req);
-	err = cgx_fwi_cmd_generic(req, &resp, cgx, 0);
-	if (!err)
-		*prfl_sz = FIELD_GET(RESP_MKEX_PRFL_SIZE, resp);
-
-	return err;
-}
-
-static inline int cgx_fwi_get_mkex_prfl_addr(u64 *prfl_addr,
-					     struct cgx *cgx)
-{
-	u64 req = 0;
-	u64 resp;
-	int err;
-
-	req = FIELD_SET(CMDREG_ID, CGX_CMD_GET_MKEX_PRFL_ADDR, req);
-	err = cgx_fwi_cmd_generic(req, &resp, cgx, 0);
-	if (!err)
-		*prfl_addr = FIELD_GET(RESP_MKEX_PRFL_ADDR, resp);
-
-	return err;
-}
-
-int cgx_get_mkex_prfl_info(u64 *addr, u64 *size)
-{
-	struct cgx *cgx_dev;
-	int err;
-
-	if (!addr || !size)
-		return -EINVAL;
-
-	cgx_dev = list_first_entry(&cgx_list, struct cgx, cgx_list);
-	if (!cgx_dev)
-		return -ENXIO;
-
-	err = cgx_fwi_get_mkex_prfl_sz(size, cgx_dev);
-	if (err)
-		return -EIO;
-
-	err = cgx_fwi_get_mkex_prfl_addr(addr, cgx_dev);
-	if (err)
-		return -EIO;
-
-	return 0;
-}
-
 static irqreturn_t cgx_fwi_event_handler(int irq, void *data)
 {
 	struct lmac *lmac = data;
@@ -781,6 +728,24 @@ int cgx_lmac_evh_unregister(void *cgxd, int lmac_id)
 	return 0;
 }
 
+int cgx_get_fwdata_base(u64 *base)
+{
+	u64 req = 0, resp;
+	struct cgx *cgx;
+	int err;
+
+	cgx = list_first_entry_or_null(&cgx_list, struct cgx, cgx_list);
+	if (!cgx)
+		return -ENXIO;
+
+	req = FIELD_SET(CMDREG_ID, CGX_CMD_GET_FWD_BASE, req);
+	err = cgx_fwi_cmd_generic(req, &resp, cgx, 0);
+	if (!err)
+		*base = FIELD_GET(RESP_FWD_BASE, resp);
+
+	return err;
+}
+
 static int cgx_fwi_link_change(struct cgx *cgx, int lmac_id, bool enable)
 {
 	u64 req = 0;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
index 115f5ec..394f965 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.h
@@ -134,9 +134,9 @@ int cgx_lmac_internal_loopback(void *cgxd, int lmac_id, bool enable);
 int cgx_get_link_info(void *cgxd, int lmac_id,
 		      struct cgx_link_user_info *linfo);
 int cgx_lmac_linkup_start(void *cgxd);
+int cgx_get_fwdata_base(u64 *base);
 int cgx_lmac_get_pause_frm(void *cgxd, int lmac_id,
 			   u8 *tx_pause, u8 *rx_pause);
 int cgx_lmac_set_pause_frm(void *cgxd, int lmac_id,
 			   u8 tx_pause, u8 rx_pause);
-int cgx_get_mkex_prfl_info(u64 *addr, u64 *size);
 #endif /* CGX_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h
index 473d975..c3702fa 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h
@@ -79,7 +79,8 @@ enum cgx_cmd_id {
 	CGX_CMD_MODE_CHANGE,		/* hot plug support */
 	CGX_CMD_INTF_SHUTDOWN,
 	CGX_CMD_GET_MKEX_PRFL_SIZE,
-	CGX_CMD_GET_MKEX_PRFL_ADDR
+	CGX_CMD_GET_MKEX_PRFL_ADDR,
+	CGX_CMD_GET_FWD_BASE,		/* get base address of shared FW data */
 };
 
 /* async event ids */
@@ -149,6 +150,11 @@ enum cgx_cmd_own {
  */
 #define RESP_MKEX_PRFL_ADDR		GENMASK_ULL(63, 9)
 
+/* Response to cmd ID as CGX_CMD_GET_FWD_BASE with cmd status as
+ * CGX_STAT_SUCCESS
+ */
+#define RESP_FWD_BASE		GENMASK_ULL(56, 9)
+
 /* Response to cmd ID - CGX_CMD_LINK_BRING_UP/DOWN, event ID CGX_EVT_LINK_CHANGE
  * status can be either CGX_STAT_FAIL or CGX_STAT_SUCCESS
  *
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index b2a6bee..6dfd0f9 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -256,7 +256,8 @@ enum rvu_af_status {
 
 struct ready_msg_rsp {
 	struct mbox_msghdr hdr;
-	u16    sclk_feq;	/* SCLK frequency */
+	u16    sclk_freq;	/* SCLK frequency (in MHz) */
+	u16    rclk_freq;	/* RCLK frequency (in MHz) */
 };
 
 /* Structure for requesting resource provisioning.
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index 5c190c3..e56b1f8 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -603,7 +603,11 @@ static int rvu_setup_msix_resources(struct rvu *rvu)
 	 */
 	cfg = rvu_read64(rvu, BLKADDR_RVUM, RVU_PRIV_CONST);
 	max_msix = cfg & 0xFFFFF;
-	phy_addr = rvu_read64(rvu, BLKADDR_RVUM, RVU_AF_MSIXTR_BASE);
+	if (rvu->fwdata && rvu->fwdata->msixtr_base)
+		phy_addr = rvu->fwdata->msixtr_base;
+	else
+		phy_addr = rvu_read64(rvu, BLKADDR_RVUM, RVU_AF_MSIXTR_BASE);
+
 	iova = dma_map_resource(rvu->dev, phy_addr,
 				max_msix * PCI_MSIX_ENTRY_SIZE,
 				DMA_BIDIRECTIONAL, 0);
@@ -613,10 +617,18 @@ static int rvu_setup_msix_resources(struct rvu *rvu)
 
 	rvu_write64(rvu, BLKADDR_RVUM, RVU_AF_MSIXTR_BASE, (u64)iova);
 	rvu->msix_base_iova = iova;
+	rvu->msixtr_base_phy = phy_addr;
 
 	return 0;
 }
 
+static void rvu_reset_msix(struct rvu *rvu)
+{
+	/* Restore msixtr base register */
+	rvu_write64(rvu, BLKADDR_RVUM, RVU_AF_MSIXTR_BASE,
+		    rvu->msixtr_base_phy);
+}
+
 static void rvu_free_hw_resources(struct rvu *rvu)
 {
 	struct rvu_hwinfo *hw = rvu->hw;
@@ -655,9 +667,80 @@ static void rvu_free_hw_resources(struct rvu *rvu)
 			   max_msix * PCI_MSIX_ENTRY_SIZE,
 			   DMA_BIDIRECTIONAL, 0);
 
+	rvu_reset_msix(rvu);
 	mutex_destroy(&rvu->rsrc_lock);
 }
 
+static void rvu_setup_pfvf_macaddress(struct rvu *rvu)
+{
+	struct rvu_hwinfo *hw = rvu->hw;
+	int pf, vf, numvfs, hwvf;
+	struct rvu_pfvf *pfvf;
+	u64 *mac;
+
+	for (pf = 0; pf < hw->total_pfs; pf++) {
+		if (!is_pf_cgxmapped(rvu, pf))
+			continue;
+		/* Assign MAC address to PF */
+		pfvf = &rvu->pf[pf];
+		if (rvu->fwdata && pf < PF_MACNUM_MAX) {
+			mac = &rvu->fwdata->pf_macs[pf];
+			if (*mac)
+				u64_to_ether_addr(*mac, pfvf->mac_addr);
+			else
+				eth_random_addr(pfvf->mac_addr);
+		} else {
+			eth_random_addr(pfvf->mac_addr);
+		}
+
+		/* Assign MAC address to VFs */
+		rvu_get_pf_numvfs(rvu, pf, &numvfs, &hwvf);
+		for (vf = 0; vf < numvfs; vf++, hwvf++) {
+			pfvf = &rvu->hwvf[hwvf];
+			if (rvu->fwdata && hwvf < VF_MACNUM_MAX) {
+				mac = &rvu->fwdata->vf_macs[hwvf];
+				if (*mac)
+					u64_to_ether_addr(*mac, pfvf->mac_addr);
+				else
+					eth_random_addr(pfvf->mac_addr);
+			} else {
+				eth_random_addr(pfvf->mac_addr);
+			}
+		}
+	}
+}
+
+static int rvu_fwdata_init(struct rvu *rvu)
+{
+	u64 fwdbase;
+	int err;
+
+	/* Get firmware data base address */
+	err = cgx_get_fwdata_base(&fwdbase);
+	if (err)
+		goto fail;
+	rvu->fwdata = ioremap_wc(fwdbase, sizeof(struct rvu_fwdata));
+	if (!rvu->fwdata)
+		goto fail;
+	if (!is_rvu_fwdata_valid(rvu)) {
+		dev_err(rvu->dev,
+			"Mismatch in 'fwdata' struct btw kernel and firmware\n");
+		iounmap(rvu->fwdata);
+		rvu->fwdata = NULL;
+		return -EINVAL;
+	}
+	return 0;
+fail:
+	dev_info(rvu->dev, "Unable to fetch 'fwdata' from firmware\n");
+	return -EIO;
+}
+
+static void rvu_fwdata_exit(struct rvu *rvu)
+{
+	if (rvu->fwdata)
+		iounmap(rvu->fwdata);
+}
+
 static int rvu_setup_hw_resources(struct rvu *rvu)
 {
 	struct rvu_hwinfo *hw = rvu->hw;
@@ -813,6 +896,8 @@ static int rvu_setup_hw_resources(struct rvu *rvu)
 
 	mutex_init(&rvu->rsrc_lock);
 
+	rvu_fwdata_init(rvu);
+
 	err = rvu_setup_msix_resources(rvu);
 	if (err)
 		return err;
@@ -825,8 +910,10 @@ static int rvu_setup_hw_resources(struct rvu *rvu)
 		/* Allocate memory for block LF/slot to pcifunc mapping info */
 		block->fn_map = devm_kcalloc(rvu->dev, block->lf.max,
 					     sizeof(u16), GFP_KERNEL);
-		if (!block->fn_map)
-			return -ENOMEM;
+		if (!block->fn_map) {
+			err = -ENOMEM;
+			goto msix_err;
+		}
 
 		/* Scan all blocks to check if low level firmware has
 		 * already provisioned any of the resources to a PF/VF.
@@ -836,25 +923,36 @@ static int rvu_setup_hw_resources(struct rvu *rvu)
 
 	err = rvu_npc_init(rvu);
 	if (err)
-		goto exit;
+		goto npc_err;
 
 	err = rvu_cgx_init(rvu);
 	if (err)
-		goto exit;
+		goto cgx_err;
+
+	/* Assign MACs for CGX mapped functions */
+	rvu_setup_pfvf_macaddress(rvu);
 
 	err = rvu_npa_init(rvu);
 	if (err)
-		goto cgx_err;
+		goto npa_err;
 
 	err = rvu_nix_init(rvu);
 	if (err)
-		goto cgx_err;
+		goto nix_err;
 
 	return 0;
 
+nix_err:
+	rvu_nix_freemem(rvu);
+npa_err:
+	rvu_npa_freemem(rvu);
 cgx_err:
 	rvu_cgx_exit(rvu);
-exit:
+npc_err:
+	rvu_npc_freemem(rvu);
+	rvu_fwdata_exit(rvu);
+msix_err:
+	rvu_reset_msix(rvu);
 	return err;
 }
 
@@ -901,6 +999,10 @@ int rvu_aq_alloc(struct rvu *rvu, struct admin_queue **ad_queue,
 int rvu_mbox_handler_ready(struct rvu *rvu, struct msg_req *req,
 			   struct ready_msg_rsp *rsp)
 {
+	if (rvu->fwdata) {
+		rsp->rclk_freq = rvu->fwdata->rclk;
+		rsp->sclk_freq = rvu->fwdata->sclk;
+	}
 	return 0;
 }
 
@@ -2506,6 +2608,7 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	rvu_mbox_destroy(&rvu->afpf_wq_info);
 err_hwsetup:
 	rvu_cgx_exit(rvu);
+	rvu_fwdata_exit(rvu);
 	rvu_reset_all_blocks(rvu);
 	rvu_free_hw_resources(rvu);
 err_release_regions:
@@ -2527,6 +2630,7 @@ static void rvu_remove(struct pci_dev *pdev)
 	rvu_unregister_interrupts(rvu);
 	rvu_flr_wq_destroy(rvu);
 	rvu_cgx_exit(rvu);
+	rvu_fwdata_exit(rvu);
 	rvu_mbox_destroy(&rvu->afpf_wq_info);
 	rvu_disable_sriov(rvu);
 	rvu_reset_all_blocks(rvu);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index 7afb7ca..dcf25a0 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -269,6 +269,26 @@ struct mbox_wq_info {
 	struct workqueue_struct *mbox_wq;
 };
 
+struct rvu_fwdata {
+#define RVU_FWDATA_HEADER_MAGIC	0xCFDA	/* Custom Firmware Data*/
+#define RVU_FWDATA_VERSION	0x0001
+	u32 header_magic;
+	u32 version;		/* version id */
+
+	/* MAC address */
+#define PF_MACNUM_MAX	32
+#define VF_MACNUM_MAX	256
+	u64 pf_macs[PF_MACNUM_MAX];
+	u64 vf_macs[VF_MACNUM_MAX];
+	u64 sclk;
+	u64 rclk;
+	u64 mcam_addr;
+	u64 mcam_sz;
+	u64 msixtr_base;
+#define FWDATA_RESERVED_MEM 1023
+	u64 reserved[FWDATA_RESERVED_MEM];
+};
+
 struct rvu {
 	void __iomem		*afreg_base;
 	void __iomem		*pfreg_base;
@@ -294,6 +314,7 @@ struct rvu {
 	char			*irq_name;
 	bool			*irq_allocated;
 	dma_addr_t		msix_base_iova;
+	u64			msixtr_base_phy; /* Register reset value */
 
 	/* CGX */
 #define PF_CGXMAP_BASE		1 /* PF 0 is reserved for RVU PF */
@@ -313,6 +334,9 @@ struct rvu {
 
 	char mkex_pfl_name[MKEX_NAME_LEN]; /* Configured MKEX profile name */
 
+	/* Firmware data */
+	struct rvu_fwdata	*fwdata;
+
 #ifdef CONFIG_DEBUG_FS
 	struct rvu_debugfs	rvu_dbg;
 #endif
@@ -363,6 +387,12 @@ static inline int is_afvf(u16 pcifunc)
 	return !(pcifunc & ~RVU_PFVF_FUNC_MASK);
 }
 
+static inline bool is_rvu_fwdata_valid(struct rvu *rvu)
+{
+	return (rvu->fwdata->header_magic == RVU_FWDATA_HEADER_MAGIC) &&
+		(rvu->fwdata->version == RVU_FWDATA_VERSION);
+}
+
 int rvu_alloc_bitmap(struct rsrc_bmap *rsrc);
 int rvu_alloc_rsrc(struct rsrc_bmap *rsrc);
 void rvu_free_rsrc(struct rsrc_bmap *rsrc, int id);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
index 40e431d..0a21408 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c
@@ -825,8 +825,10 @@ static void npc_load_mkex_profile(struct rvu *rvu, int blkaddr)
 	if (!strncmp(mkex_profile, "default", MKEX_NAME_LEN))
 		goto load_default;
 
-	if (cgx_get_mkex_prfl_info(&prfl_addr, &prfl_sz))
+	if (!rvu->fwdata)
 		goto load_default;
+	prfl_addr = rvu->fwdata->mcam_addr;
+	prfl_sz = rvu->fwdata->mcam_sz;
 
 	if (!prfl_addr || !prfl_sz)
 		goto load_default;
-- 
2.7.4

[PATCH 5/7] octeontx2-af: Set discovery ID for RVUM block

[sunil.kovvuri]

From: Sunil Goutham <sgoutham@marvell.com>

Currently there is no way for AF dependent drivers in
any domain to check if the AF driver is loaded. This
patch sets an ID for RVUM block which will automatically
reflects in PF/VFs discovery register which they can
check and defer their probe until AF is up.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c        | 18 +++++++++++++++++-
 drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h |  3 +++
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index e56b1f8..e851477 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -421,6 +421,19 @@ static void rvu_check_block_implemented(struct rvu *rvu)
 	}
 }
 
+static void rvu_setup_rvum_blk_revid(struct rvu *rvu)
+{
+	rvu_write64(rvu, BLKADDR_RVUM,
+		    RVU_PRIV_BLOCK_TYPEX_REV(BLKTYPE_RVUM),
+		    RVU_BLK_RVUM_REVID);
+}
+
+static void rvu_clear_rvum_blk_revid(struct rvu *rvu)
+{
+	rvu_write64(rvu, BLKADDR_RVUM,
+		    RVU_PRIV_BLOCK_TYPEX_REV(BLKTYPE_RVUM), 0x00);
+}
+
 int rvu_lf_reset(struct rvu *rvu, struct rvu_block *block, int lf)
 {
 	int err;
@@ -2591,6 +2604,8 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (err)
 		goto err_flr;
 
+	rvu_setup_rvum_blk_revid(rvu);
+
 	/* Enable AF's VFs (if any) */
 	err = rvu_enable_sriov(rvu);
 	if (err)
@@ -2611,6 +2626,7 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	rvu_fwdata_exit(rvu);
 	rvu_reset_all_blocks(rvu);
 	rvu_free_hw_resources(rvu);
+	rvu_clear_rvum_blk_revid(rvu);
 err_release_regions:
 	pci_release_regions(pdev);
 err_disable_device:
@@ -2635,7 +2651,7 @@ static void rvu_remove(struct pci_dev *pdev)
 	rvu_disable_sriov(rvu);
 	rvu_reset_all_blocks(rvu);
 	rvu_free_hw_resources(rvu);
-
+	rvu_clear_rvum_blk_revid(rvu);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h
index 9d8942a..a3ecb5d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h
@@ -11,6 +11,9 @@
 #ifndef RVU_STRUCT_H
 #define RVU_STRUCT_H
 
+/* RVU Block revision IDs */
+#define RVU_BLK_RVUM_REVID		0x01
+
 /* RVU Block Address Enumeration */
 enum rvu_block_addr_e {
 	BLKADDR_RVUM		= 0x0ULL,
-- 
2.7.4

[PATCH 6/7] octeontx2-af: Enable PCI master

[sunil.kovvuri]

From: Sunil Goutham <sgoutham@marvell.com>

Bus mastering is enabled by firmware, but when this driver
is unbinded bus mastering gets disabled by the PCI subsystem
which results interrupts not working when driver is reloaded.
Hence set bus mastering everytime in probe().

Also
- Converted pci_set_dma_mask() and pci_set_consistent_dma_mask()
  to dma_set_mask_and_coherent().
- Cleared transaction pending bit which gets set during
  driver unbind due to clearing of bus mastering (ME bit).

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index e851477..3b794df 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -2243,6 +2243,9 @@ static int rvu_register_interrupts(struct rvu *rvu)
 	}
 	rvu->irq_allocated[RVU_AF_INT_VEC_PFME] = true;
 
+	/* Clear TRPEND bit for all PF */
+	rvu_write64(rvu, BLKADDR_RVUM,
+		    RVU_AF_PFTRPEND, INTR_MASK(rvu->hw->total_pfs));
 	/* Enable ME interrupt for all PFs*/
 	rvu_write64(rvu, BLKADDR_RVUM,
 		    RVU_AF_PFME_INT, INTR_MASK(rvu->hw->total_pfs));
@@ -2554,17 +2557,13 @@ static int rvu_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err_disable_device;
 	}
 
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(48));
+	err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48));
 	if (err) {
-		dev_err(dev, "Unable to set DMA mask\n");
+		dev_err(dev, "DMA mask config failed, abort\n");
 		goto err_release_regions;
 	}
 
-	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(48));
-	if (err) {
-		dev_err(dev, "Unable to set consistent DMA mask\n");
-		goto err_release_regions;
-	}
+	pci_set_master(pdev);
 
 	/* Map Admin function CSRs */
 	rvu->afreg_base = pcim_iomap(pdev, PCI_AF_REG_BAR_NUM, 0);
-- 
2.7.4

[PATCH 7/7] octeontx2-af: Modify rvu_reg_poll() to check reg atleast twice

[sunil.kovvuri]

From: Sunil Goutham <sgoutham@marvell.com>

Currently on the first check if the operation is still not
finished, the poll goes to sleep for 2-5 usecs. But if for
some reason (due to other priority stuff like interrupts etc) by
the time the poll wakes up the 10ms time is expired then we don't
check if operation is finished or not and return failure.

This patch modifies poll logic to check HW operation after sleep so
that the status is checked atleast twice.

Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index 3b794df..5ff25bf 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -88,13 +88,15 @@ int rvu_poll_reg(struct rvu *rvu, u64 block, u64 offset, u64 mask, bool zero)
 	u64 reg_val;
 
 	reg = rvu->afreg_base + ((block << 28) | offset);
-	while (time_before(jiffies, timeout)) {
-		reg_val = readq(reg);
-		if (zero && !(reg_val & mask))
-			return 0;
-		if (!zero && (reg_val & mask))
-			return 0;
+again:
+	reg_val = readq(reg);
+	if (zero && !(reg_val & mask))
+		return 0;
+	if (!zero && (reg_val & mask))
+		return 0;
+	if (time_before(jiffies, timeout)) {
 		usleep_range(1, 5);
+		goto again;
 	}
 	return -EBUSY;
 }
-- 
2.7.4

Re: [PATCH 3/7] octeontx2-pf: Support to enable/disable pause frames via ethtool

[Andrew Lunn]

Hi Sunil

> +static int otx2_set_pauseparam(struct net_device *netdev,
> +			       struct ethtool_pauseparam *pause)
> +{
> +	struct otx2_nic *pfvf = netdev_priv(netdev);
> +
> +	if (pause->autoneg)
> +		return -EOPNOTSUPP;

Nice to see somebody getting that bit correct.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH 0/7] octeontx2: Flow control support and other misc changes

[David Miller]

From: sunil.kovvuri@gmail.com
Date: Mon,  2 Mar 2020 12:49:21 +0530

> From: Sunil Goutham <sgoutham@marvell.com>
> 
> This patch series adds flow control support (802.3 pause frames) and
> has other changes wrt generic admin function (AF) driver functionality.

Series applied, thanks.

Re: [PATCH 4/7] octeontx2-af: Optimize data retrieval from firmware

[kbuild test robot]

Hi,

I love your patch! Perhaps something to improve:

[auto build test WARNING on next-20200228]
[cannot apply to linus/master ipvs/master sparc-next/master v5.6-rc4 v5.6-rc3 v5.6-rc2 v5.6-rc4]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/sunil-kovvuri-gmail-com/octeontx2-Flow-control-support-and-other-misc-changes/20200302-154733
base:    770fbb32d34e5d6298cc2be590c9d2fd6069aa17
reproduce:
        # apt-get install sparse
        # sparse version: v0.6.1-173-ge0787745-dirty
        make ARCH=x86_64 allmodconfig
        make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>


sparse warnings: (new ones prefixed by >>)

>> drivers/net/ethernet/marvell/octeontx2/af/rvu.c:722:21: sparse: sparse: incorrect type in assignment (different address spaces)
>> drivers/net/ethernet/marvell/octeontx2/af/rvu.c:722:21: sparse:    expected struct rvu_fwdata *fwdata
>> drivers/net/ethernet/marvell/octeontx2/af/rvu.c:722:21: sparse:    got void [noderef] <asn:2> *
>> drivers/net/ethernet/marvell/octeontx2/af/rvu.c:728:28: sparse: sparse: incorrect type in argument 1 (different address spaces)
>> drivers/net/ethernet/marvell/octeontx2/af/rvu.c:728:28: sparse:    expected void volatile [noderef] <asn:2> *addr
>> drivers/net/ethernet/marvell/octeontx2/af/rvu.c:728:28: sparse:    got struct rvu_fwdata *fwdata
   drivers/net/ethernet/marvell/octeontx2/af/rvu.c:741:28: sparse: sparse: incorrect type in argument 1 (different address spaces)
   drivers/net/ethernet/marvell/octeontx2/af/rvu.c:741:28: sparse:    expected void volatile [noderef] <asn:2> *addr
   drivers/net/ethernet/marvell/octeontx2/af/rvu.c:741:28: sparse:    got struct rvu_fwdata *fwdata

vim +722 drivers/net/ethernet/marvell/octeontx2/af/rvu.c

   712	
   713	static int rvu_fwdata_init(struct rvu *rvu)
   714	{
   715		u64 fwdbase;
   716		int err;
   717	
   718		/* Get firmware data base address */
   719		err = cgx_get_fwdata_base(&fwdbase);
   720		if (err)
   721			goto fail;
 > 722		rvu->fwdata = ioremap_wc(fwdbase, sizeof(struct rvu_fwdata));
   723		if (!rvu->fwdata)
   724			goto fail;
   725		if (!is_rvu_fwdata_valid(rvu)) {
   726			dev_err(rvu->dev,
   727				"Mismatch in 'fwdata' struct btw kernel and firmware\n");
 > 728			iounmap(rvu->fwdata);
   729			rvu->fwdata = NULL;
   730			return -EINVAL;
   731		}
   732		return 0;
   733	fail:
   734		dev_info(rvu->dev, "Unable to fetch 'fwdata' from firmware\n");
   735		return -EIO;
   736	}
   737	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org