* [PATCH v3 1/6] selftests/seccomp: use correct FIXTURE macro
2020-03-16 22:56 [PATCH v3 0/6] kselftest: add fixture parameters Jakub Kicinski
@ 2020-03-16 22:56 ` Jakub Kicinski
2020-03-17 20:22 ` Kees Cook
2020-03-16 22:56 ` [PATCH v3 2/6] kselftest: factor out list manipulation to a helper Jakub Kicinski
` (6 subsequent siblings)
7 siblings, 1 reply; 17+ messages in thread
From: Jakub Kicinski @ 2020-03-16 22:56 UTC (permalink / raw)
To: shuah, keescook
Cc: luto, wad, linux-kselftest, netdev, linux-kernel, kernel-team,
Tim.Bird, Jakub Kicinski
Quoting kdoc:
FIXTURE_DATA:
* This call may be used when the type of the fixture data
* is needed. In general, this should not be needed unless
* the *self* is being passed to a helper directly.
FIXTURE:
* Defines the data provided to TEST_F()-defined tests as *self*. It should be
* populated and cleaned up using FIXTURE_SETUP() and FIXTURE_TEARDOWN().
seccomp should use FIXTURE to declare types.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
tools/testing/selftests/seccomp/seccomp_bpf.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index ee1b727ede04..7bf82fb07f67 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -909,7 +909,7 @@ TEST(ERRNO_order)
EXPECT_EQ(12, errno);
}
-FIXTURE_DATA(TRAP) {
+FIXTURE(TRAP) {
struct sock_fprog prog;
};
@@ -1020,7 +1020,7 @@ TEST_F(TRAP, handler)
EXPECT_NE(0, (unsigned long)sigsys->_call_addr);
}
-FIXTURE_DATA(precedence) {
+FIXTURE(precedence) {
struct sock_fprog allow;
struct sock_fprog log;
struct sock_fprog trace;
@@ -1509,7 +1509,7 @@ void tracer_poke(struct __test_metadata *_metadata, pid_t tracee, int status,
EXPECT_EQ(0, ret);
}
-FIXTURE_DATA(TRACE_poke) {
+FIXTURE(TRACE_poke) {
struct sock_fprog prog;
pid_t tracer;
long poked;
@@ -1817,7 +1817,7 @@ void tracer_ptrace(struct __test_metadata *_metadata, pid_t tracee,
change_syscall(_metadata, tracee, -1, -ESRCH);
}
-FIXTURE_DATA(TRACE_syscall) {
+FIXTURE(TRACE_syscall) {
struct sock_fprog prog;
pid_t tracer, mytid, mypid, parent;
};
@@ -2321,7 +2321,7 @@ struct tsync_sibling {
} \
} while (0)
-FIXTURE_DATA(TSYNC) {
+FIXTURE(TSYNC) {
struct sock_fprog root_prog, apply_prog;
struct tsync_sibling sibling[TSYNC_SIBLINGS];
sem_t started;
--
2.24.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v3 1/6] selftests/seccomp: use correct FIXTURE macro
2020-03-16 22:56 ` [PATCH v3 1/6] selftests/seccomp: use correct FIXTURE macro Jakub Kicinski
@ 2020-03-17 20:22 ` Kees Cook
0 siblings, 0 replies; 17+ messages in thread
From: Kees Cook @ 2020-03-17 20:22 UTC (permalink / raw)
To: Jakub Kicinski
Cc: shuah, luto, wad, linux-kselftest, netdev, linux-kernel,
kernel-team, Tim.Bird
On Mon, Mar 16, 2020 at 03:56:41PM -0700, Jakub Kicinski wrote:
> Quoting kdoc:
>
> FIXTURE_DATA:
> * This call may be used when the type of the fixture data
> * is needed. In general, this should not be needed unless
> * the *self* is being passed to a helper directly.
>
> FIXTURE:
> * Defines the data provided to TEST_F()-defined tests as *self*. It should be
> * populated and cleaned up using FIXTURE_SETUP() and FIXTURE_TEARDOWN().
>
> seccomp should use FIXTURE to declare types.
>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
-Kees
> ---
> tools/testing/selftests/seccomp/seccomp_bpf.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
> index ee1b727ede04..7bf82fb07f67 100644
> --- a/tools/testing/selftests/seccomp/seccomp_bpf.c
> +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
> @@ -909,7 +909,7 @@ TEST(ERRNO_order)
> EXPECT_EQ(12, errno);
> }
>
> -FIXTURE_DATA(TRAP) {
> +FIXTURE(TRAP) {
> struct sock_fprog prog;
> };
>
> @@ -1020,7 +1020,7 @@ TEST_F(TRAP, handler)
> EXPECT_NE(0, (unsigned long)sigsys->_call_addr);
> }
>
> -FIXTURE_DATA(precedence) {
> +FIXTURE(precedence) {
> struct sock_fprog allow;
> struct sock_fprog log;
> struct sock_fprog trace;
> @@ -1509,7 +1509,7 @@ void tracer_poke(struct __test_metadata *_metadata, pid_t tracee, int status,
> EXPECT_EQ(0, ret);
> }
>
> -FIXTURE_DATA(TRACE_poke) {
> +FIXTURE(TRACE_poke) {
> struct sock_fprog prog;
> pid_t tracer;
> long poked;
> @@ -1817,7 +1817,7 @@ void tracer_ptrace(struct __test_metadata *_metadata, pid_t tracee,
> change_syscall(_metadata, tracee, -1, -ESRCH);
> }
>
> -FIXTURE_DATA(TRACE_syscall) {
> +FIXTURE(TRACE_syscall) {
> struct sock_fprog prog;
> pid_t tracer, mytid, mypid, parent;
> };
> @@ -2321,7 +2321,7 @@ struct tsync_sibling {
> } \
> } while (0)
>
> -FIXTURE_DATA(TSYNC) {
> +FIXTURE(TSYNC) {
> struct sock_fprog root_prog, apply_prog;
> struct tsync_sibling sibling[TSYNC_SIBLINGS];
> sem_t started;
> --
> 2.24.1
>
--
Kees Cook
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 2/6] kselftest: factor out list manipulation to a helper
2020-03-16 22:56 [PATCH v3 0/6] kselftest: add fixture parameters Jakub Kicinski
2020-03-16 22:56 ` [PATCH v3 1/6] selftests/seccomp: use correct FIXTURE macro Jakub Kicinski
@ 2020-03-16 22:56 ` Jakub Kicinski
2020-03-17 20:22 ` Kees Cook
2020-03-16 22:56 ` [PATCH v3 3/6] kselftest: create fixture objects Jakub Kicinski
` (5 subsequent siblings)
7 siblings, 1 reply; 17+ messages in thread
From: Jakub Kicinski @ 2020-03-16 22:56 UTC (permalink / raw)
To: shuah, keescook
Cc: luto, wad, linux-kselftest, netdev, linux-kernel, kernel-team,
Tim.Bird, Jakub Kicinski
Kees suggest to factor out the list append code to a macro,
since following commits need it, which leads to code duplication.
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
tools/testing/selftests/kselftest_harness.h | 42 ++++++++++++---------
1 file changed, 24 insertions(+), 18 deletions(-)
diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index 5336b26506ab..aaf58fffc8f7 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -631,6 +631,29 @@
} \
} while (0); OPTIONAL_HANDLER(_assert)
+/* List helpers */
+#define __LIST_APPEND(head, item) \
+{ \
+ /* Circular linked list where only prev is circular. */ \
+ if (head == NULL) { \
+ head = item; \
+ item->next = NULL; \
+ item->prev = item; \
+ return; \
+ } \
+ if (__constructor_order == _CONSTRUCTOR_ORDER_FORWARD) { \
+ item->next = NULL; \
+ item->prev = head->prev; \
+ item->prev->next = item; \
+ head->prev = item; \
+ } else { \
+ item->next = head; \
+ item->next->prev = item; \
+ item->prev = item; \
+ head = item; \
+ } \
+}
+
/* Contains all the information for test execution and status checking. */
struct __test_metadata {
const char *name;
@@ -665,24 +688,7 @@ static int __constructor_order;
static inline void __register_test(struct __test_metadata *t)
{
__test_count++;
- /* Circular linked list where only prev is circular. */
- if (__test_list == NULL) {
- __test_list = t;
- t->next = NULL;
- t->prev = t;
- return;
- }
- if (__constructor_order == _CONSTRUCTOR_ORDER_FORWARD) {
- t->next = NULL;
- t->prev = __test_list->prev;
- t->prev->next = t;
- __test_list->prev = t;
- } else {
- t->next = __test_list;
- t->next->prev = t;
- t->prev = t;
- __test_list = t;
- }
+ __LIST_APPEND(__test_list, t);
}
static inline int __bail(int for_realz, bool no_print, __u8 step)
--
2.24.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v3 2/6] kselftest: factor out list manipulation to a helper
2020-03-16 22:56 ` [PATCH v3 2/6] kselftest: factor out list manipulation to a helper Jakub Kicinski
@ 2020-03-17 20:22 ` Kees Cook
0 siblings, 0 replies; 17+ messages in thread
From: Kees Cook @ 2020-03-17 20:22 UTC (permalink / raw)
To: Jakub Kicinski
Cc: shuah, luto, wad, linux-kselftest, netdev, linux-kernel,
kernel-team, Tim.Bird
On Mon, Mar 16, 2020 at 03:56:42PM -0700, Jakub Kicinski wrote:
> Kees suggest to factor out the list append code to a macro,
> since following commits need it, which leads to code duplication.
>
> Suggested-by: Kees Cook <keescook@chromium.org>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
-Kees
> ---
> tools/testing/selftests/kselftest_harness.h | 42 ++++++++++++---------
> 1 file changed, 24 insertions(+), 18 deletions(-)
>
> diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
> index 5336b26506ab..aaf58fffc8f7 100644
> --- a/tools/testing/selftests/kselftest_harness.h
> +++ b/tools/testing/selftests/kselftest_harness.h
> @@ -631,6 +631,29 @@
> } \
> } while (0); OPTIONAL_HANDLER(_assert)
>
> +/* List helpers */
> +#define __LIST_APPEND(head, item) \
> +{ \
> + /* Circular linked list where only prev is circular. */ \
> + if (head == NULL) { \
> + head = item; \
> + item->next = NULL; \
> + item->prev = item; \
> + return; \
> + } \
> + if (__constructor_order == _CONSTRUCTOR_ORDER_FORWARD) { \
> + item->next = NULL; \
> + item->prev = head->prev; \
> + item->prev->next = item; \
> + head->prev = item; \
> + } else { \
> + item->next = head; \
> + item->next->prev = item; \
> + item->prev = item; \
> + head = item; \
> + } \
> +}
> +
> /* Contains all the information for test execution and status checking. */
> struct __test_metadata {
> const char *name;
> @@ -665,24 +688,7 @@ static int __constructor_order;
> static inline void __register_test(struct __test_metadata *t)
> {
> __test_count++;
> - /* Circular linked list where only prev is circular. */
> - if (__test_list == NULL) {
> - __test_list = t;
> - t->next = NULL;
> - t->prev = t;
> - return;
> - }
> - if (__constructor_order == _CONSTRUCTOR_ORDER_FORWARD) {
> - t->next = NULL;
> - t->prev = __test_list->prev;
> - t->prev->next = t;
> - __test_list->prev = t;
> - } else {
> - t->next = __test_list;
> - t->next->prev = t;
> - t->prev = t;
> - __test_list = t;
> - }
> + __LIST_APPEND(__test_list, t);
> }
>
> static inline int __bail(int for_realz, bool no_print, __u8 step)
> --
> 2.24.1
>
--
Kees Cook
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 3/6] kselftest: create fixture objects
2020-03-16 22:56 [PATCH v3 0/6] kselftest: add fixture parameters Jakub Kicinski
2020-03-16 22:56 ` [PATCH v3 1/6] selftests/seccomp: use correct FIXTURE macro Jakub Kicinski
2020-03-16 22:56 ` [PATCH v3 2/6] kselftest: factor out list manipulation to a helper Jakub Kicinski
@ 2020-03-16 22:56 ` Jakub Kicinski
2020-03-17 20:23 ` Kees Cook
2020-03-16 22:56 ` [PATCH v3 4/6] kselftest: run tests by fixture Jakub Kicinski
` (4 subsequent siblings)
7 siblings, 1 reply; 17+ messages in thread
From: Jakub Kicinski @ 2020-03-16 22:56 UTC (permalink / raw)
To: shuah, keescook
Cc: luto, wad, linux-kselftest, netdev, linux-kernel, kernel-team,
Tim.Bird, Jakub Kicinski
Grouping tests by fixture will allow us to parametrize
test runs. Create full objects for fixtures.
Add a "global" fixture for tests without a fixture.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
tools/testing/selftests/kselftest_harness.h | 46 ++++++++++++++++-----
1 file changed, 35 insertions(+), 11 deletions(-)
diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index aaf58fffc8f7..0f68943d6f04 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -169,8 +169,10 @@
#define __TEST_IMPL(test_name, _signal) \
static void test_name(struct __test_metadata *_metadata); \
static struct __test_metadata _##test_name##_object = \
- { .name = "global." #test_name, \
- .fn = &test_name, .termsig = _signal, \
+ { .name = #test_name, \
+ .fn = &test_name, \
+ .fixture = &_fixture_global, \
+ .termsig = _signal, \
.timeout = TEST_TIMEOUT_DEFAULT, }; \
static void __attribute__((constructor)) _register_##test_name(void) \
{ \
@@ -212,10 +214,12 @@
* populated and cleaned up using FIXTURE_SETUP() and FIXTURE_TEARDOWN().
*/
#define FIXTURE(fixture_name) \
+ static struct __fixture_metadata _##fixture_name##_fixture_object = \
+ { .name = #fixture_name, }; \
static void __attribute__((constructor)) \
_register_##fixture_name##_data(void) \
{ \
- __fixture_count++; \
+ __register_fixture(&_##fixture_name##_fixture_object); \
} \
FIXTURE_DATA(fixture_name)
@@ -309,8 +313,9 @@
} \
static struct __test_metadata \
_##fixture_name##_##test_name##_object = { \
- .name = #fixture_name "." #test_name, \
+ .name = #test_name, \
.fn = &wrapper_##fixture_name##_##test_name, \
+ .fixture = &_##fixture_name##_fixture_object, \
.termsig = signal, \
.timeout = tmout, \
}; \
@@ -654,10 +659,33 @@
} \
}
+/* Contains all the information about a fixture */
+struct __fixture_metadata {
+ const char *name;
+ struct __fixture_metadata *prev, *next;
+} _fixture_global __attribute__((unused)) = {
+ .name = "global",
+ .prev = &_fixture_global,
+};
+
+static struct __fixture_metadata *__fixture_list = &_fixture_global;
+static unsigned int __fixture_count;
+static int __constructor_order;
+
+#define _CONSTRUCTOR_ORDER_FORWARD 1
+#define _CONSTRUCTOR_ORDER_BACKWARD -1
+
+static inline void __register_fixture(struct __fixture_metadata *f)
+{
+ __fixture_count++;
+ __LIST_APPEND(__fixture_list, f);
+}
+
/* Contains all the information for test execution and status checking. */
struct __test_metadata {
const char *name;
void (*fn)(struct __test_metadata *);
+ struct __fixture_metadata *fixture;
int termsig;
int passed;
int trigger; /* extra handler after the evaluation */
@@ -670,11 +698,6 @@ struct __test_metadata {
/* Storage for the (global) tests to be run. */
static struct __test_metadata *__test_list;
static unsigned int __test_count;
-static unsigned int __fixture_count;
-static int __constructor_order;
-
-#define _CONSTRUCTOR_ORDER_FORWARD 1
-#define _CONSTRUCTOR_ORDER_BACKWARD -1
/*
* Since constructors are called in reverse order, reverse the test
@@ -708,7 +731,7 @@ void __run_test(struct __test_metadata *t)
t->passed = 1;
t->trigger = 0;
- printf("[ RUN ] %s\n", t->name);
+ printf("[ RUN ] %s.%s\n", t->fixture->name, t->name);
alarm(t->timeout);
child_pid = fork();
if (child_pid < 0) {
@@ -757,7 +780,8 @@ void __run_test(struct __test_metadata *t)
status);
}
}
- printf("[ %4s ] %s\n", (t->passed ? "OK" : "FAIL"), t->name);
+ printf("[ %4s ] %s.%s\n", (t->passed ? "OK" : "FAIL"),
+ t->fixture->name, t->name);
alarm(0);
}
--
2.24.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v3 3/6] kselftest: create fixture objects
2020-03-16 22:56 ` [PATCH v3 3/6] kselftest: create fixture objects Jakub Kicinski
@ 2020-03-17 20:23 ` Kees Cook
0 siblings, 0 replies; 17+ messages in thread
From: Kees Cook @ 2020-03-17 20:23 UTC (permalink / raw)
To: Jakub Kicinski
Cc: shuah, luto, wad, linux-kselftest, netdev, linux-kernel,
kernel-team, Tim.Bird
On Mon, Mar 16, 2020 at 03:56:43PM -0700, Jakub Kicinski wrote:
> Grouping tests by fixture will allow us to parametrize
> test runs. Create full objects for fixtures.
>
> Add a "global" fixture for tests without a fixture.
>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
-Kees
> ---
> tools/testing/selftests/kselftest_harness.h | 46 ++++++++++++++++-----
> 1 file changed, 35 insertions(+), 11 deletions(-)
>
> diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
> index aaf58fffc8f7..0f68943d6f04 100644
> --- a/tools/testing/selftests/kselftest_harness.h
> +++ b/tools/testing/selftests/kselftest_harness.h
> @@ -169,8 +169,10 @@
> #define __TEST_IMPL(test_name, _signal) \
> static void test_name(struct __test_metadata *_metadata); \
> static struct __test_metadata _##test_name##_object = \
> - { .name = "global." #test_name, \
> - .fn = &test_name, .termsig = _signal, \
> + { .name = #test_name, \
> + .fn = &test_name, \
> + .fixture = &_fixture_global, \
> + .termsig = _signal, \
> .timeout = TEST_TIMEOUT_DEFAULT, }; \
> static void __attribute__((constructor)) _register_##test_name(void) \
> { \
> @@ -212,10 +214,12 @@
> * populated and cleaned up using FIXTURE_SETUP() and FIXTURE_TEARDOWN().
> */
> #define FIXTURE(fixture_name) \
> + static struct __fixture_metadata _##fixture_name##_fixture_object = \
> + { .name = #fixture_name, }; \
> static void __attribute__((constructor)) \
> _register_##fixture_name##_data(void) \
> { \
> - __fixture_count++; \
> + __register_fixture(&_##fixture_name##_fixture_object); \
> } \
> FIXTURE_DATA(fixture_name)
>
> @@ -309,8 +313,9 @@
> } \
> static struct __test_metadata \
> _##fixture_name##_##test_name##_object = { \
> - .name = #fixture_name "." #test_name, \
> + .name = #test_name, \
> .fn = &wrapper_##fixture_name##_##test_name, \
> + .fixture = &_##fixture_name##_fixture_object, \
> .termsig = signal, \
> .timeout = tmout, \
> }; \
> @@ -654,10 +659,33 @@
> } \
> }
>
> +/* Contains all the information about a fixture */
> +struct __fixture_metadata {
> + const char *name;
> + struct __fixture_metadata *prev, *next;
> +} _fixture_global __attribute__((unused)) = {
> + .name = "global",
> + .prev = &_fixture_global,
> +};
> +
> +static struct __fixture_metadata *__fixture_list = &_fixture_global;
> +static unsigned int __fixture_count;
> +static int __constructor_order;
> +
> +#define _CONSTRUCTOR_ORDER_FORWARD 1
> +#define _CONSTRUCTOR_ORDER_BACKWARD -1
> +
> +static inline void __register_fixture(struct __fixture_metadata *f)
> +{
> + __fixture_count++;
> + __LIST_APPEND(__fixture_list, f);
> +}
> +
> /* Contains all the information for test execution and status checking. */
> struct __test_metadata {
> const char *name;
> void (*fn)(struct __test_metadata *);
> + struct __fixture_metadata *fixture;
> int termsig;
> int passed;
> int trigger; /* extra handler after the evaluation */
> @@ -670,11 +698,6 @@ struct __test_metadata {
> /* Storage for the (global) tests to be run. */
> static struct __test_metadata *__test_list;
> static unsigned int __test_count;
> -static unsigned int __fixture_count;
> -static int __constructor_order;
> -
> -#define _CONSTRUCTOR_ORDER_FORWARD 1
> -#define _CONSTRUCTOR_ORDER_BACKWARD -1
>
> /*
> * Since constructors are called in reverse order, reverse the test
> @@ -708,7 +731,7 @@ void __run_test(struct __test_metadata *t)
>
> t->passed = 1;
> t->trigger = 0;
> - printf("[ RUN ] %s\n", t->name);
> + printf("[ RUN ] %s.%s\n", t->fixture->name, t->name);
> alarm(t->timeout);
> child_pid = fork();
> if (child_pid < 0) {
> @@ -757,7 +780,8 @@ void __run_test(struct __test_metadata *t)
> status);
> }
> }
> - printf("[ %4s ] %s\n", (t->passed ? "OK" : "FAIL"), t->name);
> + printf("[ %4s ] %s.%s\n", (t->passed ? "OK" : "FAIL"),
> + t->fixture->name, t->name);
> alarm(0);
> }
>
> --
> 2.24.1
>
--
Kees Cook
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 4/6] kselftest: run tests by fixture
2020-03-16 22:56 [PATCH v3 0/6] kselftest: add fixture parameters Jakub Kicinski
` (2 preceding siblings ...)
2020-03-16 22:56 ` [PATCH v3 3/6] kselftest: create fixture objects Jakub Kicinski
@ 2020-03-16 22:56 ` Jakub Kicinski
2020-03-17 20:25 ` Kees Cook
2020-03-16 22:56 ` [PATCH v3 5/6] kselftest: add fixture parameters Jakub Kicinski
` (3 subsequent siblings)
7 siblings, 1 reply; 17+ messages in thread
From: Jakub Kicinski @ 2020-03-16 22:56 UTC (permalink / raw)
To: shuah, keescook
Cc: luto, wad, linux-kselftest, netdev, linux-kernel, kernel-team,
Tim.Bird, Jakub Kicinski
Now that all tests have a fixture object move from a global
list of tests to a list of tests per fixture.
Order of tests may change as we will now group and run test
fixture by fixture, rather than in declaration order.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
tools/testing/selftests/kselftest_harness.h | 32 +++++++++++++--------
1 file changed, 20 insertions(+), 12 deletions(-)
diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index 0f68943d6f04..36ab1b92eb35 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -660,8 +660,11 @@
}
/* Contains all the information about a fixture */
+struct __test_metadata;
+
struct __fixture_metadata {
const char *name;
+ struct __test_metadata *tests;
struct __fixture_metadata *prev, *next;
} _fixture_global __attribute__((unused)) = {
.name = "global",
@@ -696,7 +699,6 @@ struct __test_metadata {
};
/* Storage for the (global) tests to be run. */
-static struct __test_metadata *__test_list;
static unsigned int __test_count;
/*
@@ -710,8 +712,10 @@ static unsigned int __test_count;
*/
static inline void __register_test(struct __test_metadata *t)
{
+ struct __fixture_metadata *f = t->fixture;
+
__test_count++;
- __LIST_APPEND(__test_list, t);
+ __LIST_APPEND(f->tests, t);
}
static inline int __bail(int for_realz, bool no_print, __u8 step)
@@ -724,14 +728,15 @@ static inline int __bail(int for_realz, bool no_print, __u8 step)
return 0;
}
-void __run_test(struct __test_metadata *t)
+void __run_test(struct __fixture_metadata *f,
+ struct __test_metadata *t)
{
pid_t child_pid;
int status;
t->passed = 1;
t->trigger = 0;
- printf("[ RUN ] %s.%s\n", t->fixture->name, t->name);
+ printf("[ RUN ] %s.%s\n", f->name, t->name);
alarm(t->timeout);
child_pid = fork();
if (child_pid < 0) {
@@ -781,13 +786,14 @@ void __run_test(struct __test_metadata *t)
}
}
printf("[ %4s ] %s.%s\n", (t->passed ? "OK" : "FAIL"),
- t->fixture->name, t->name);
+ f->name, t->name);
alarm(0);
}
static int test_harness_run(int __attribute__((unused)) argc,
char __attribute__((unused)) **argv)
{
+ struct __fixture_metadata *f;
struct __test_metadata *t;
int ret = 0;
unsigned int count = 0;
@@ -796,13 +802,15 @@ static int test_harness_run(int __attribute__((unused)) argc,
/* TODO(wad) add optional arguments similar to gtest. */
printf("[==========] Running %u tests from %u test cases.\n",
__test_count, __fixture_count + 1);
- for (t = __test_list; t; t = t->next) {
- count++;
- __run_test(t);
- if (t->passed)
- pass_count++;
- else
- ret = 1;
+ for (f = __fixture_list; f; f = f->next) {
+ for (t = f->tests; t; t = t->next) {
+ count++;
+ __run_test(f, t);
+ if (t->passed)
+ pass_count++;
+ else
+ ret = 1;
+ }
}
printf("[==========] %u / %u tests passed.\n", pass_count, count);
printf("[ %s ]\n", (ret ? "FAILED" : "PASSED"));
--
2.24.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v3 4/6] kselftest: run tests by fixture
2020-03-16 22:56 ` [PATCH v3 4/6] kselftest: run tests by fixture Jakub Kicinski
@ 2020-03-17 20:25 ` Kees Cook
0 siblings, 0 replies; 17+ messages in thread
From: Kees Cook @ 2020-03-17 20:25 UTC (permalink / raw)
To: Jakub Kicinski
Cc: shuah, luto, wad, linux-kselftest, netdev, linux-kernel,
kernel-team, Tim.Bird
On Mon, Mar 16, 2020 at 03:56:44PM -0700, Jakub Kicinski wrote:
> Now that all tests have a fixture object move from a global
> list of tests to a list of tests per fixture.
>
> Order of tests may change as we will now group and run test
> fixture by fixture, rather than in declaration order.
>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> ---
> tools/testing/selftests/kselftest_harness.h | 32 +++++++++++++--------
> 1 file changed, 20 insertions(+), 12 deletions(-)
>
> diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
> index 0f68943d6f04..36ab1b92eb35 100644
> --- a/tools/testing/selftests/kselftest_harness.h
> +++ b/tools/testing/selftests/kselftest_harness.h
> @@ -660,8 +660,11 @@
> }
>
> /* Contains all the information about a fixture */
> +struct __test_metadata;
> +
Comment should be moved under this (it applies to __fixture_metadata not
__test_metadata).
> struct __fixture_metadata {
> const char *name;
> + struct __test_metadata *tests;
> struct __fixture_metadata *prev, *next;
> } _fixture_global __attribute__((unused)) = {
> .name = "global",
> @@ -696,7 +699,6 @@ struct __test_metadata {
> };
>
> /* Storage for the (global) tests to be run. */
> -static struct __test_metadata *__test_list;
> static unsigned int __test_count;
>
> /*
> @@ -710,8 +712,10 @@ static unsigned int __test_count;
> */
> static inline void __register_test(struct __test_metadata *t)
> {
> + struct __fixture_metadata *f = t->fixture;
> +
> __test_count++;
> - __LIST_APPEND(__test_list, t);
> + __LIST_APPEND(f->tests, t);
Not a big deal, but why not just "f->fixture->tests" here instead of a
separate variable?
> }
>
> static inline int __bail(int for_realz, bool no_print, __u8 step)
> @@ -724,14 +728,15 @@ static inline int __bail(int for_realz, bool no_print, __u8 step)
> return 0;
> }
>
> -void __run_test(struct __test_metadata *t)
> +void __run_test(struct __fixture_metadata *f,
> + struct __test_metadata *t)
> {
> pid_t child_pid;
> int status;
>
> t->passed = 1;
> t->trigger = 0;
> - printf("[ RUN ] %s.%s\n", t->fixture->name, t->name);
> + printf("[ RUN ] %s.%s\n", f->name, t->name);
> alarm(t->timeout);
> child_pid = fork();
> if (child_pid < 0) {
> @@ -781,13 +786,14 @@ void __run_test(struct __test_metadata *t)
> }
> }
> printf("[ %4s ] %s.%s\n", (t->passed ? "OK" : "FAIL"),
> - t->fixture->name, t->name);
> + f->name, t->name);
> alarm(0);
> }
>
> static int test_harness_run(int __attribute__((unused)) argc,
> char __attribute__((unused)) **argv)
> {
> + struct __fixture_metadata *f;
> struct __test_metadata *t;
> int ret = 0;
> unsigned int count = 0;
> @@ -796,13 +802,15 @@ static int test_harness_run(int __attribute__((unused)) argc,
> /* TODO(wad) add optional arguments similar to gtest. */
> printf("[==========] Running %u tests from %u test cases.\n",
> __test_count, __fixture_count + 1);
> - for (t = __test_list; t; t = t->next) {
> - count++;
> - __run_test(t);
> - if (t->passed)
> - pass_count++;
> - else
> - ret = 1;
> + for (f = __fixture_list; f; f = f->next) {
> + for (t = f->tests; t; t = t->next) {
> + count++;
> + __run_test(f, t);
> + if (t->passed)
> + pass_count++;
> + else
> + ret = 1;
> + }
> }
> printf("[==========] %u / %u tests passed.\n", pass_count, count);
> printf("[ %s ]\n", (ret ? "FAILED" : "PASSED"));
> --
> 2.24.1
>
But, with at least the first comment moved:
Acked-by: Kees Cook <keescook@chromium.org>
--
Kees Cook
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 5/6] kselftest: add fixture parameters
2020-03-16 22:56 [PATCH v3 0/6] kselftest: add fixture parameters Jakub Kicinski
` (3 preceding siblings ...)
2020-03-16 22:56 ` [PATCH v3 4/6] kselftest: run tests by fixture Jakub Kicinski
@ 2020-03-16 22:56 ` Jakub Kicinski
2020-03-17 20:36 ` Kees Cook
2020-03-16 22:56 ` [PATCH v3 5/6] kselftest: add fixture variants Jakub Kicinski
` (2 subsequent siblings)
7 siblings, 1 reply; 17+ messages in thread
From: Jakub Kicinski @ 2020-03-16 22:56 UTC (permalink / raw)
To: shuah, keescook
Cc: luto, wad, linux-kselftest, netdev, linux-kernel, kernel-team,
Tim.Bird, Jakub Kicinski
Allow users to pass parameters to fixtures.
Each fixture will be evaluated for each of its parameter
sets.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
--
v3:
- separate variant name out with a dot.
---
Documentation/dev-tools/kselftest.rst | 3 +-
tools/testing/selftests/kselftest_harness.h | 145 ++++++++++++++++----
2 files changed, 121 insertions(+), 27 deletions(-)
diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst
index 61ae13c44f91..5d1f56fcd2e7 100644
--- a/Documentation/dev-tools/kselftest.rst
+++ b/Documentation/dev-tools/kselftest.rst
@@ -301,7 +301,8 @@ Helpers
.. kernel-doc:: tools/testing/selftests/kselftest_harness.h
:functions: TH_LOG TEST TEST_SIGNAL FIXTURE FIXTURE_DATA FIXTURE_SETUP
- FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN
+ FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN FIXTURE_VARIANT
+ FIXTURE_VARIANT_ADD
Operators
---------
diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index 36ab1b92eb35..1a079afa2d01 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -168,9 +168,15 @@
#define __TEST_IMPL(test_name, _signal) \
static void test_name(struct __test_metadata *_metadata); \
+ static inline void wrapper_##test_name( \
+ struct __test_metadata *_metadata, \
+ struct __fixture_variant_metadata *variant) \
+ { \
+ test_name(_metadata); \
+ } \
static struct __test_metadata _##test_name##_object = \
{ .name = #test_name, \
- .fn = &test_name, \
+ .fn = &wrapper_##test_name, \
.fixture = &_fixture_global, \
.termsig = _signal, \
.timeout = TEST_TIMEOUT_DEFAULT, }; \
@@ -214,6 +220,7 @@
* populated and cleaned up using FIXTURE_SETUP() and FIXTURE_TEARDOWN().
*/
#define FIXTURE(fixture_name) \
+ FIXTURE_VARIANT(fixture_name); \
static struct __fixture_metadata _##fixture_name##_fixture_object = \
{ .name = #fixture_name, }; \
static void __attribute__((constructor)) \
@@ -245,7 +252,9 @@
#define FIXTURE_SETUP(fixture_name) \
void fixture_name##_setup( \
struct __test_metadata __attribute__((unused)) *_metadata, \
- FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
+ FIXTURE_DATA(fixture_name) __attribute__((unused)) *self, \
+ const FIXTURE_VARIANT(fixture_name) __attribute__((unused)) *variant)
+
/**
* FIXTURE_TEARDOWN(fixture_name)
* *_metadata* is included so that EXPECT_* and ASSERT_* work correctly.
@@ -267,6 +276,58 @@
struct __test_metadata __attribute__((unused)) *_metadata, \
FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
+/**
+ * FIXTURE_VARIANT(fixture_name) - Optionally called once per fixture
+ * to declare fixture variant
+ *
+ * @fixture_name: fixture name
+ *
+ * .. code-block:: c
+ *
+ * FIXTURE_VARIANT(datatype name) {
+ * type property1;
+ * ...
+ * };
+ *
+ * Defines type of constant parameters provided to FIXTURE_SETUP() and TEST_F()
+ * as *variant*. Variants allow the same tests to be run with different
+ * arguments.
+ */
+#define FIXTURE_VARIANT(fixture_name) struct _fixture_variant_##fixture_name
+
+/**
+ * FIXTURE_VARIANT_ADD(fixture_name, variant_name) - Called once per fixture
+ * variant to setup and register the data
+ *
+ * @fixture_name: fixture name
+ * @variant_name: name of the parameter set
+ *
+ * .. code-block:: c
+ *
+ * FIXTURE_ADD(datatype name) {
+ * .property1 = val1;
+ * ...
+ * };
+ *
+ * Defines a variant of the test fixture, provided to FIXTURE_SETUP() and
+ * TEST_F() as *variant*. Tests of each fixture will be run once for each
+ * variant.
+ */
+#define FIXTURE_VARIANT_ADD(fixture_name, variant_name) \
+ extern FIXTURE_VARIANT(fixture_name) \
+ _##fixture_name##_##variant_name##_variant; \
+ static struct __fixture_variant_metadata \
+ _##fixture_name##_##variant_name##_object = \
+ { .name = #variant_name, \
+ .data = &_##fixture_name##_##variant_name##_variant}; \
+ static void __attribute__((constructor)) \
+ _register_##fixture_name##_##variant_name(void) \
+ { \
+ __register_fixture_variant(&_##fixture_name##_fixture_object, \
+ &_##fixture_name##_##variant_name##_object); \
+ } \
+ FIXTURE_VARIANT(fixture_name) _##fixture_name##_##variant_name##_variant =
+
/**
* TEST_F(fixture_name, test_name) - Emits test registration and helpers for
* fixture-based test cases
@@ -297,18 +358,20 @@
#define __TEST_F_IMPL(fixture_name, test_name, signal, tmout) \
static void fixture_name##_##test_name( \
struct __test_metadata *_metadata, \
- FIXTURE_DATA(fixture_name) *self); \
+ FIXTURE_DATA(fixture_name) *self, \
+ const FIXTURE_VARIANT(fixture_name) *variant); \
static inline void wrapper_##fixture_name##_##test_name( \
- struct __test_metadata *_metadata) \
+ struct __test_metadata *_metadata, \
+ struct __fixture_variant_metadata *variant) \
{ \
/* fixture data is alloced, setup, and torn down per call. */ \
FIXTURE_DATA(fixture_name) self; \
memset(&self, 0, sizeof(FIXTURE_DATA(fixture_name))); \
- fixture_name##_setup(_metadata, &self); \
+ fixture_name##_setup(_metadata, &self, variant->data); \
/* Let setup failure terminate early. */ \
if (!_metadata->passed) \
return; \
- fixture_name##_##test_name(_metadata, &self); \
+ fixture_name##_##test_name(_metadata, &self, variant->data); \
fixture_name##_teardown(_metadata, &self); \
} \
static struct __test_metadata \
@@ -326,7 +389,8 @@
} \
static void fixture_name##_##test_name( \
struct __test_metadata __attribute__((unused)) *_metadata, \
- FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
+ FIXTURE_DATA(fixture_name) __attribute__((unused)) *self, \
+ const FIXTURE_VARIANT(fixture_name) __attribute__((unused)) *variant)
/**
* TEST_HARNESS_MAIN - Simple wrapper to run the test harness
@@ -661,10 +725,12 @@
/* Contains all the information about a fixture */
struct __test_metadata;
+struct __fixture_variant_metadata;
struct __fixture_metadata {
const char *name;
struct __test_metadata *tests;
+ struct __fixture_variant_metadata *variant;
struct __fixture_metadata *prev, *next;
} _fixture_global __attribute__((unused)) = {
.name = "global",
@@ -672,7 +738,6 @@ struct __fixture_metadata {
};
static struct __fixture_metadata *__fixture_list = &_fixture_global;
-static unsigned int __fixture_count;
static int __constructor_order;
#define _CONSTRUCTOR_ORDER_FORWARD 1
@@ -680,14 +745,27 @@ static int __constructor_order;
static inline void __register_fixture(struct __fixture_metadata *f)
{
- __fixture_count++;
__LIST_APPEND(__fixture_list, f);
}
+struct __fixture_variant_metadata {
+ const char *name;
+ const void *data;
+ struct __fixture_variant_metadata *prev, *next;
+};
+
+static inline void
+__register_fixture_variant(struct __fixture_metadata *f,
+ struct __fixture_variant_metadata *variant)
+{
+ __LIST_APPEND(f->variant, variant);
+}
+
/* Contains all the information for test execution and status checking. */
struct __test_metadata {
const char *name;
- void (*fn)(struct __test_metadata *);
+ void (*fn)(struct __test_metadata *,
+ struct __fixture_variant_metadata *);
struct __fixture_metadata *fixture;
int termsig;
int passed;
@@ -698,9 +776,6 @@ struct __test_metadata {
struct __test_metadata *prev, *next;
};
-/* Storage for the (global) tests to be run. */
-static unsigned int __test_count;
-
/*
* Since constructors are called in reverse order, reverse the test
* list so tests are run in source declaration order.
@@ -714,7 +789,6 @@ static inline void __register_test(struct __test_metadata *t)
{
struct __fixture_metadata *f = t->fixture;
- __test_count++;
__LIST_APPEND(f->tests, t);
}
@@ -729,21 +803,27 @@ static inline int __bail(int for_realz, bool no_print, __u8 step)
}
void __run_test(struct __fixture_metadata *f,
+ struct __fixture_variant_metadata *variant,
struct __test_metadata *t)
{
pid_t child_pid;
int status;
+ /* reset test struct */
t->passed = 1;
t->trigger = 0;
- printf("[ RUN ] %s.%s\n", f->name, t->name);
+ t->step = 0;
+ t->no_print = 0;
+
+ printf("[ RUN ] %s%s%s.%s\n",
+ f->name, variant->name[0] ? "." : "", variant->name, t->name);
alarm(t->timeout);
child_pid = fork();
if (child_pid < 0) {
printf("ERROR SPAWNING TEST CHILD\n");
t->passed = 0;
} else if (child_pid == 0) {
- t->fn(t);
+ t->fn(t, variant);
/* return the step that failed or 0 */
_exit(t->passed ? 0 : t->step);
} else {
@@ -785,31 +865,44 @@ void __run_test(struct __fixture_metadata *f,
status);
}
}
- printf("[ %4s ] %s.%s\n", (t->passed ? "OK" : "FAIL"),
- f->name, t->name);
+ printf("[ %4s ] %s%s%s.%s\n", (t->passed ? "OK" : "FAIL"),
+ f->name, variant->name[0] ? "." : "", variant->name, t->name);
alarm(0);
}
static int test_harness_run(int __attribute__((unused)) argc,
char __attribute__((unused)) **argv)
{
+ struct __fixture_variant_metadata no_variant = { .name = "", };
+ struct __fixture_variant_metadata *v;
struct __fixture_metadata *f;
struct __test_metadata *t;
int ret = 0;
+ unsigned int case_count = 0, test_count = 0;
unsigned int count = 0;
unsigned int pass_count = 0;
+ for (f = __fixture_list; f; f = f->next) {
+ for (v = f->variant ?: &no_variant; v; v = v->next) {
+ case_count++;
+ for (t = f->tests; t; t = t->next)
+ test_count++;
+ }
+ }
+
/* TODO(wad) add optional arguments similar to gtest. */
printf("[==========] Running %u tests from %u test cases.\n",
- __test_count, __fixture_count + 1);
+ test_count, case_count);
for (f = __fixture_list; f; f = f->next) {
- for (t = f->tests; t; t = t->next) {
- count++;
- __run_test(f, t);
- if (t->passed)
- pass_count++;
- else
- ret = 1;
+ for (v = f->variant ?: &no_variant; v; v = v->next) {
+ for (t = f->tests; t; t = t->next) {
+ count++;
+ __run_test(f, v, t);
+ if (t->passed)
+ pass_count++;
+ else
+ ret = 1;
+ }
}
}
printf("[==========] %u / %u tests passed.\n", pass_count, count);
--
2.24.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v3 5/6] kselftest: add fixture parameters
2020-03-16 22:56 ` [PATCH v3 5/6] kselftest: add fixture parameters Jakub Kicinski
@ 2020-03-17 20:36 ` Kees Cook
0 siblings, 0 replies; 17+ messages in thread
From: Kees Cook @ 2020-03-17 20:36 UTC (permalink / raw)
To: Jakub Kicinski
Cc: shuah, luto, wad, linux-kselftest, netdev, linux-kernel,
kernel-team, Tim.Bird
On Mon, Mar 16, 2020 at 03:56:45PM -0700, Jakub Kicinski wrote:
> Allow users to pass parameters to fixtures.
>
> Each fixture will be evaluated for each of its parameter
> sets.
This commit log (and subject) needs to be reworded/expanded slightly.
Perhaps:
Subject: kselftest: add fixture variants
Allow users to build parameterized variants of fixtures.
If fixtures want variants, they call FIXTURE_VARIANT() to declare the
structure to fill for each variant. Each fixture will be re-run for each
of the variants defined by calling FIXTURE_VARIANT_ADD() with the
differing parameters initializing the structure.
Since tests are being re-run, additional initialization (steps,
no_print) is also added.
>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> --
> v3:
> - separate variant name out with a dot.
> ---
> Documentation/dev-tools/kselftest.rst | 3 +-
> tools/testing/selftests/kselftest_harness.h | 145 ++++++++++++++++----
> 2 files changed, 121 insertions(+), 27 deletions(-)
>
> diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst
> index 61ae13c44f91..5d1f56fcd2e7 100644
> --- a/Documentation/dev-tools/kselftest.rst
> +++ b/Documentation/dev-tools/kselftest.rst
> @@ -301,7 +301,8 @@ Helpers
>
> .. kernel-doc:: tools/testing/selftests/kselftest_harness.h
> :functions: TH_LOG TEST TEST_SIGNAL FIXTURE FIXTURE_DATA FIXTURE_SETUP
> - FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN
> + FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN FIXTURE_VARIANT
> + FIXTURE_VARIANT_ADD
>
> Operators
> ---------
> diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
> index 36ab1b92eb35..1a079afa2d01 100644
> --- a/tools/testing/selftests/kselftest_harness.h
> +++ b/tools/testing/selftests/kselftest_harness.h
> @@ -168,9 +168,15 @@
>
> #define __TEST_IMPL(test_name, _signal) \
> static void test_name(struct __test_metadata *_metadata); \
> + static inline void wrapper_##test_name( \
> + struct __test_metadata *_metadata, \
> + struct __fixture_variant_metadata *variant) \
> + { \
> + test_name(_metadata); \
> + } \
> static struct __test_metadata _##test_name##_object = \
> { .name = #test_name, \
> - .fn = &test_name, \
> + .fn = &wrapper_##test_name, \
> .fixture = &_fixture_global, \
> .termsig = _signal, \
> .timeout = TEST_TIMEOUT_DEFAULT, }; \
> @@ -214,6 +220,7 @@
> * populated and cleaned up using FIXTURE_SETUP() and FIXTURE_TEARDOWN().
> */
> #define FIXTURE(fixture_name) \
> + FIXTURE_VARIANT(fixture_name); \
> static struct __fixture_metadata _##fixture_name##_fixture_object = \
> { .name = #fixture_name, }; \
> static void __attribute__((constructor)) \
> @@ -245,7 +252,9 @@
> #define FIXTURE_SETUP(fixture_name) \
> void fixture_name##_setup( \
> struct __test_metadata __attribute__((unused)) *_metadata, \
> - FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
> + FIXTURE_DATA(fixture_name) __attribute__((unused)) *self, \
> + const FIXTURE_VARIANT(fixture_name) __attribute__((unused)) *variant)
> +
> /**
> * FIXTURE_TEARDOWN(fixture_name)
> * *_metadata* is included so that EXPECT_* and ASSERT_* work correctly.
> @@ -267,6 +276,58 @@
> struct __test_metadata __attribute__((unused)) *_metadata, \
> FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
>
> +/**
> + * FIXTURE_VARIANT(fixture_name) - Optionally called once per fixture
> + * to declare fixture variant
> + *
> + * @fixture_name: fixture name
> + *
> + * .. code-block:: c
> + *
> + * FIXTURE_VARIANT(datatype name) {
> + * type property1;
> + * ...
> + * };
> + *
> + * Defines type of constant parameters provided to FIXTURE_SETUP() and TEST_F()
> + * as *variant*. Variants allow the same tests to be run with different
> + * arguments.
> + */
> +#define FIXTURE_VARIANT(fixture_name) struct _fixture_variant_##fixture_name
> +
> +/**
> + * FIXTURE_VARIANT_ADD(fixture_name, variant_name) - Called once per fixture
> + * variant to setup and register the data
> + *
> + * @fixture_name: fixture name
> + * @variant_name: name of the parameter set
> + *
> + * .. code-block:: c
> + *
> + * FIXTURE_ADD(datatype name) {
> + * .property1 = val1;
> + * ...
> + * };
> + *
> + * Defines a variant of the test fixture, provided to FIXTURE_SETUP() and
> + * TEST_F() as *variant*. Tests of each fixture will be run once for each
> + * variant.
> + */
> +#define FIXTURE_VARIANT_ADD(fixture_name, variant_name) \
> + extern FIXTURE_VARIANT(fixture_name) \
> + _##fixture_name##_##variant_name##_variant; \
> + static struct __fixture_variant_metadata \
> + _##fixture_name##_##variant_name##_object = \
> + { .name = #variant_name, \
> + .data = &_##fixture_name##_##variant_name##_variant}; \
> + static void __attribute__((constructor)) \
> + _register_##fixture_name##_##variant_name(void) \
> + { \
> + __register_fixture_variant(&_##fixture_name##_fixture_object, \
> + &_##fixture_name##_##variant_name##_object); \
> + } \
> + FIXTURE_VARIANT(fixture_name) _##fixture_name##_##variant_name##_variant =
> +
> /**
> * TEST_F(fixture_name, test_name) - Emits test registration and helpers for
> * fixture-based test cases
> @@ -297,18 +358,20 @@
> #define __TEST_F_IMPL(fixture_name, test_name, signal, tmout) \
> static void fixture_name##_##test_name( \
> struct __test_metadata *_metadata, \
> - FIXTURE_DATA(fixture_name) *self); \
> + FIXTURE_DATA(fixture_name) *self, \
> + const FIXTURE_VARIANT(fixture_name) *variant); \
> static inline void wrapper_##fixture_name##_##test_name( \
> - struct __test_metadata *_metadata) \
> + struct __test_metadata *_metadata, \
> + struct __fixture_variant_metadata *variant) \
> { \
> /* fixture data is alloced, setup, and torn down per call. */ \
> FIXTURE_DATA(fixture_name) self; \
> memset(&self, 0, sizeof(FIXTURE_DATA(fixture_name))); \
> - fixture_name##_setup(_metadata, &self); \
> + fixture_name##_setup(_metadata, &self, variant->data); \
> /* Let setup failure terminate early. */ \
> if (!_metadata->passed) \
> return; \
> - fixture_name##_##test_name(_metadata, &self); \
> + fixture_name##_##test_name(_metadata, &self, variant->data); \
> fixture_name##_teardown(_metadata, &self); \
> } \
> static struct __test_metadata \
> @@ -326,7 +389,8 @@
> } \
> static void fixture_name##_##test_name( \
> struct __test_metadata __attribute__((unused)) *_metadata, \
> - FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
> + FIXTURE_DATA(fixture_name) __attribute__((unused)) *self, \
> + const FIXTURE_VARIANT(fixture_name) __attribute__((unused)) *variant)
>
> /**
> * TEST_HARNESS_MAIN - Simple wrapper to run the test harness
> @@ -661,10 +725,12 @@
>
> /* Contains all the information about a fixture */
> struct __test_metadata;
> +struct __fixture_variant_metadata;
>
> struct __fixture_metadata {
> const char *name;
> struct __test_metadata *tests;
> + struct __fixture_variant_metadata *variant;
> struct __fixture_metadata *prev, *next;
> } _fixture_global __attribute__((unused)) = {
> .name = "global",
> @@ -672,7 +738,6 @@ struct __fixture_metadata {
> };
>
> static struct __fixture_metadata *__fixture_list = &_fixture_global;
> -static unsigned int __fixture_count;
> static int __constructor_order;
>
> #define _CONSTRUCTOR_ORDER_FORWARD 1
> @@ -680,14 +745,27 @@ static int __constructor_order;
>
> static inline void __register_fixture(struct __fixture_metadata *f)
> {
> - __fixture_count++;
> __LIST_APPEND(__fixture_list, f);
> }
>
> +struct __fixture_variant_metadata {
> + const char *name;
> + const void *data;
> + struct __fixture_variant_metadata *prev, *next;
> +};
> +
> +static inline void
> +__register_fixture_variant(struct __fixture_metadata *f,
> + struct __fixture_variant_metadata *variant)
> +{
> + __LIST_APPEND(f->variant, variant);
> +}
> +
> /* Contains all the information for test execution and status checking. */
> struct __test_metadata {
> const char *name;
> - void (*fn)(struct __test_metadata *);
> + void (*fn)(struct __test_metadata *,
> + struct __fixture_variant_metadata *);
> struct __fixture_metadata *fixture;
> int termsig;
> int passed;
> @@ -698,9 +776,6 @@ struct __test_metadata {
> struct __test_metadata *prev, *next;
> };
>
> -/* Storage for the (global) tests to be run. */
> -static unsigned int __test_count;
> -
> /*
> * Since constructors are called in reverse order, reverse the test
> * list so tests are run in source declaration order.
> @@ -714,7 +789,6 @@ static inline void __register_test(struct __test_metadata *t)
> {
> struct __fixture_metadata *f = t->fixture;
>
> - __test_count++;
> __LIST_APPEND(f->tests, t);
> }
>
> @@ -729,21 +803,27 @@ static inline int __bail(int for_realz, bool no_print, __u8 step)
> }
>
> void __run_test(struct __fixture_metadata *f,
> + struct __fixture_variant_metadata *variant,
> struct __test_metadata *t)
> {
> pid_t child_pid;
> int status;
>
> + /* reset test struct */
> t->passed = 1;
> t->trigger = 0;
> - printf("[ RUN ] %s.%s\n", f->name, t->name);
> + t->step = 0;
> + t->no_print = 0;
I called this out in the commit log. This will need some merge attention
when my series for timeouts is merged too (since the new "timed_out"
will need to be initialized here too), but you don't have to worry about
that yet.
> +
> + printf("[ RUN ] %s%s%s.%s\n",
> + f->name, variant->name[0] ? "." : "", variant->name, t->name);
> alarm(t->timeout);
> child_pid = fork();
> if (child_pid < 0) {
> printf("ERROR SPAWNING TEST CHILD\n");
> t->passed = 0;
> } else if (child_pid == 0) {
> - t->fn(t);
> + t->fn(t, variant);
> /* return the step that failed or 0 */
> _exit(t->passed ? 0 : t->step);
> } else {
> @@ -785,31 +865,44 @@ void __run_test(struct __fixture_metadata *f,
> status);
> }
> }
> - printf("[ %4s ] %s.%s\n", (t->passed ? "OK" : "FAIL"),
> - f->name, t->name);
> + printf("[ %4s ] %s%s%s.%s\n", (t->passed ? "OK" : "FAIL"),
> + f->name, variant->name[0] ? "." : "", variant->name, t->name);
> alarm(0);
> }
>
> static int test_harness_run(int __attribute__((unused)) argc,
> char __attribute__((unused)) **argv)
> {
> + struct __fixture_variant_metadata no_variant = { .name = "", };
> + struct __fixture_variant_metadata *v;
> struct __fixture_metadata *f;
> struct __test_metadata *t;
> int ret = 0;
> + unsigned int case_count = 0, test_count = 0;
> unsigned int count = 0;
> unsigned int pass_count = 0;
>
> + for (f = __fixture_list; f; f = f->next) {
> + for (v = f->variant ?: &no_variant; v; v = v->next) {
> + case_count++;
> + for (t = f->tests; t; t = t->next)
> + test_count++;
> + }
> + }
> +
> /* TODO(wad) add optional arguments similar to gtest. */
> printf("[==========] Running %u tests from %u test cases.\n",
> - __test_count, __fixture_count + 1);
> + test_count, case_count);
> for (f = __fixture_list; f; f = f->next) {
> - for (t = f->tests; t; t = t->next) {
> - count++;
> - __run_test(f, t);
> - if (t->passed)
> - pass_count++;
> - else
> - ret = 1;
> + for (v = f->variant ?: &no_variant; v; v = v->next) {
> + for (t = f->tests; t; t = t->next) {
> + count++;
> + __run_test(f, v, t);
> + if (t->passed)
> + pass_count++;
> + else
> + ret = 1;
> + }
> }
> }
> printf("[==========] %u / %u tests passed.\n", pass_count, count);
> --
> 2.24.1
>
Otherwise, with those things fixed, yes:
Acked-by: Kees Cook <keescook@chromium.org>
--
Kees Cook
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 5/6] kselftest: add fixture variants
2020-03-16 22:56 [PATCH v3 0/6] kselftest: add fixture parameters Jakub Kicinski
` (4 preceding siblings ...)
2020-03-16 22:56 ` [PATCH v3 5/6] kselftest: add fixture parameters Jakub Kicinski
@ 2020-03-16 22:56 ` Jakub Kicinski
2020-03-17 20:37 ` Kees Cook
2020-03-16 22:56 ` [PATCH v3 6/6] selftests: tls: run all tests for TLS 1.2 and TLS 1.3 Jakub Kicinski
2020-03-16 22:59 ` [PATCH v3 0/6] kselftest: add fixture parameters Jakub Kicinski
7 siblings, 1 reply; 17+ messages in thread
From: Jakub Kicinski @ 2020-03-16 22:56 UTC (permalink / raw)
To: shuah, keescook
Cc: luto, wad, linux-kselftest, netdev, linux-kernel, kernel-team,
Tim.Bird, Jakub Kicinski
Allow users to pass parameters to fixtures.
Each fixture will be evaluated for each of its variants.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
--
v3:
- separate variant name out with a dot;
- count variants as "cases" in the opening print.
---
Documentation/dev-tools/kselftest.rst | 3 +-
tools/testing/selftests/kselftest_harness.h | 145 ++++++++++++++++----
2 files changed, 121 insertions(+), 27 deletions(-)
diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst
index 61ae13c44f91..5d1f56fcd2e7 100644
--- a/Documentation/dev-tools/kselftest.rst
+++ b/Documentation/dev-tools/kselftest.rst
@@ -301,7 +301,8 @@ Helpers
.. kernel-doc:: tools/testing/selftests/kselftest_harness.h
:functions: TH_LOG TEST TEST_SIGNAL FIXTURE FIXTURE_DATA FIXTURE_SETUP
- FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN
+ FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN FIXTURE_VARIANT
+ FIXTURE_VARIANT_ADD
Operators
---------
diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index 36ab1b92eb35..1a079afa2d01 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -168,9 +168,15 @@
#define __TEST_IMPL(test_name, _signal) \
static void test_name(struct __test_metadata *_metadata); \
+ static inline void wrapper_##test_name( \
+ struct __test_metadata *_metadata, \
+ struct __fixture_variant_metadata *variant) \
+ { \
+ test_name(_metadata); \
+ } \
static struct __test_metadata _##test_name##_object = \
{ .name = #test_name, \
- .fn = &test_name, \
+ .fn = &wrapper_##test_name, \
.fixture = &_fixture_global, \
.termsig = _signal, \
.timeout = TEST_TIMEOUT_DEFAULT, }; \
@@ -214,6 +220,7 @@
* populated and cleaned up using FIXTURE_SETUP() and FIXTURE_TEARDOWN().
*/
#define FIXTURE(fixture_name) \
+ FIXTURE_VARIANT(fixture_name); \
static struct __fixture_metadata _##fixture_name##_fixture_object = \
{ .name = #fixture_name, }; \
static void __attribute__((constructor)) \
@@ -245,7 +252,9 @@
#define FIXTURE_SETUP(fixture_name) \
void fixture_name##_setup( \
struct __test_metadata __attribute__((unused)) *_metadata, \
- FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
+ FIXTURE_DATA(fixture_name) __attribute__((unused)) *self, \
+ const FIXTURE_VARIANT(fixture_name) __attribute__((unused)) *variant)
+
/**
* FIXTURE_TEARDOWN(fixture_name)
* *_metadata* is included so that EXPECT_* and ASSERT_* work correctly.
@@ -267,6 +276,58 @@
struct __test_metadata __attribute__((unused)) *_metadata, \
FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
+/**
+ * FIXTURE_VARIANT(fixture_name) - Optionally called once per fixture
+ * to declare fixture variant
+ *
+ * @fixture_name: fixture name
+ *
+ * .. code-block:: c
+ *
+ * FIXTURE_VARIANT(datatype name) {
+ * type property1;
+ * ...
+ * };
+ *
+ * Defines type of constant parameters provided to FIXTURE_SETUP() and TEST_F()
+ * as *variant*. Variants allow the same tests to be run with different
+ * arguments.
+ */
+#define FIXTURE_VARIANT(fixture_name) struct _fixture_variant_##fixture_name
+
+/**
+ * FIXTURE_VARIANT_ADD(fixture_name, variant_name) - Called once per fixture
+ * variant to setup and register the data
+ *
+ * @fixture_name: fixture name
+ * @variant_name: name of the parameter set
+ *
+ * .. code-block:: c
+ *
+ * FIXTURE_ADD(datatype name) {
+ * .property1 = val1;
+ * ...
+ * };
+ *
+ * Defines a variant of the test fixture, provided to FIXTURE_SETUP() and
+ * TEST_F() as *variant*. Tests of each fixture will be run once for each
+ * variant.
+ */
+#define FIXTURE_VARIANT_ADD(fixture_name, variant_name) \
+ extern FIXTURE_VARIANT(fixture_name) \
+ _##fixture_name##_##variant_name##_variant; \
+ static struct __fixture_variant_metadata \
+ _##fixture_name##_##variant_name##_object = \
+ { .name = #variant_name, \
+ .data = &_##fixture_name##_##variant_name##_variant}; \
+ static void __attribute__((constructor)) \
+ _register_##fixture_name##_##variant_name(void) \
+ { \
+ __register_fixture_variant(&_##fixture_name##_fixture_object, \
+ &_##fixture_name##_##variant_name##_object); \
+ } \
+ FIXTURE_VARIANT(fixture_name) _##fixture_name##_##variant_name##_variant =
+
/**
* TEST_F(fixture_name, test_name) - Emits test registration and helpers for
* fixture-based test cases
@@ -297,18 +358,20 @@
#define __TEST_F_IMPL(fixture_name, test_name, signal, tmout) \
static void fixture_name##_##test_name( \
struct __test_metadata *_metadata, \
- FIXTURE_DATA(fixture_name) *self); \
+ FIXTURE_DATA(fixture_name) *self, \
+ const FIXTURE_VARIANT(fixture_name) *variant); \
static inline void wrapper_##fixture_name##_##test_name( \
- struct __test_metadata *_metadata) \
+ struct __test_metadata *_metadata, \
+ struct __fixture_variant_metadata *variant) \
{ \
/* fixture data is alloced, setup, and torn down per call. */ \
FIXTURE_DATA(fixture_name) self; \
memset(&self, 0, sizeof(FIXTURE_DATA(fixture_name))); \
- fixture_name##_setup(_metadata, &self); \
+ fixture_name##_setup(_metadata, &self, variant->data); \
/* Let setup failure terminate early. */ \
if (!_metadata->passed) \
return; \
- fixture_name##_##test_name(_metadata, &self); \
+ fixture_name##_##test_name(_metadata, &self, variant->data); \
fixture_name##_teardown(_metadata, &self); \
} \
static struct __test_metadata \
@@ -326,7 +389,8 @@
} \
static void fixture_name##_##test_name( \
struct __test_metadata __attribute__((unused)) *_metadata, \
- FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
+ FIXTURE_DATA(fixture_name) __attribute__((unused)) *self, \
+ const FIXTURE_VARIANT(fixture_name) __attribute__((unused)) *variant)
/**
* TEST_HARNESS_MAIN - Simple wrapper to run the test harness
@@ -661,10 +725,12 @@
/* Contains all the information about a fixture */
struct __test_metadata;
+struct __fixture_variant_metadata;
struct __fixture_metadata {
const char *name;
struct __test_metadata *tests;
+ struct __fixture_variant_metadata *variant;
struct __fixture_metadata *prev, *next;
} _fixture_global __attribute__((unused)) = {
.name = "global",
@@ -672,7 +738,6 @@ struct __fixture_metadata {
};
static struct __fixture_metadata *__fixture_list = &_fixture_global;
-static unsigned int __fixture_count;
static int __constructor_order;
#define _CONSTRUCTOR_ORDER_FORWARD 1
@@ -680,14 +745,27 @@ static int __constructor_order;
static inline void __register_fixture(struct __fixture_metadata *f)
{
- __fixture_count++;
__LIST_APPEND(__fixture_list, f);
}
+struct __fixture_variant_metadata {
+ const char *name;
+ const void *data;
+ struct __fixture_variant_metadata *prev, *next;
+};
+
+static inline void
+__register_fixture_variant(struct __fixture_metadata *f,
+ struct __fixture_variant_metadata *variant)
+{
+ __LIST_APPEND(f->variant, variant);
+}
+
/* Contains all the information for test execution and status checking. */
struct __test_metadata {
const char *name;
- void (*fn)(struct __test_metadata *);
+ void (*fn)(struct __test_metadata *,
+ struct __fixture_variant_metadata *);
struct __fixture_metadata *fixture;
int termsig;
int passed;
@@ -698,9 +776,6 @@ struct __test_metadata {
struct __test_metadata *prev, *next;
};
-/* Storage for the (global) tests to be run. */
-static unsigned int __test_count;
-
/*
* Since constructors are called in reverse order, reverse the test
* list so tests are run in source declaration order.
@@ -714,7 +789,6 @@ static inline void __register_test(struct __test_metadata *t)
{
struct __fixture_metadata *f = t->fixture;
- __test_count++;
__LIST_APPEND(f->tests, t);
}
@@ -729,21 +803,27 @@ static inline int __bail(int for_realz, bool no_print, __u8 step)
}
void __run_test(struct __fixture_metadata *f,
+ struct __fixture_variant_metadata *variant,
struct __test_metadata *t)
{
pid_t child_pid;
int status;
+ /* reset test struct */
t->passed = 1;
t->trigger = 0;
- printf("[ RUN ] %s.%s\n", f->name, t->name);
+ t->step = 0;
+ t->no_print = 0;
+
+ printf("[ RUN ] %s%s%s.%s\n",
+ f->name, variant->name[0] ? "." : "", variant->name, t->name);
alarm(t->timeout);
child_pid = fork();
if (child_pid < 0) {
printf("ERROR SPAWNING TEST CHILD\n");
t->passed = 0;
} else if (child_pid == 0) {
- t->fn(t);
+ t->fn(t, variant);
/* return the step that failed or 0 */
_exit(t->passed ? 0 : t->step);
} else {
@@ -785,31 +865,44 @@ void __run_test(struct __fixture_metadata *f,
status);
}
}
- printf("[ %4s ] %s.%s\n", (t->passed ? "OK" : "FAIL"),
- f->name, t->name);
+ printf("[ %4s ] %s%s%s.%s\n", (t->passed ? "OK" : "FAIL"),
+ f->name, variant->name[0] ? "." : "", variant->name, t->name);
alarm(0);
}
static int test_harness_run(int __attribute__((unused)) argc,
char __attribute__((unused)) **argv)
{
+ struct __fixture_variant_metadata no_variant = { .name = "", };
+ struct __fixture_variant_metadata *v;
struct __fixture_metadata *f;
struct __test_metadata *t;
int ret = 0;
+ unsigned int case_count = 0, test_count = 0;
unsigned int count = 0;
unsigned int pass_count = 0;
+ for (f = __fixture_list; f; f = f->next) {
+ for (v = f->variant ?: &no_variant; v; v = v->next) {
+ case_count++;
+ for (t = f->tests; t; t = t->next)
+ test_count++;
+ }
+ }
+
/* TODO(wad) add optional arguments similar to gtest. */
printf("[==========] Running %u tests from %u test cases.\n",
- __test_count, __fixture_count + 1);
+ test_count, case_count);
for (f = __fixture_list; f; f = f->next) {
- for (t = f->tests; t; t = t->next) {
- count++;
- __run_test(f, t);
- if (t->passed)
- pass_count++;
- else
- ret = 1;
+ for (v = f->variant ?: &no_variant; v; v = v->next) {
+ for (t = f->tests; t; t = t->next) {
+ count++;
+ __run_test(f, v, t);
+ if (t->passed)
+ pass_count++;
+ else
+ ret = 1;
+ }
}
}
printf("[==========] %u / %u tests passed.\n", pass_count, count);
--
2.24.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v3 5/6] kselftest: add fixture variants
2020-03-16 22:56 ` [PATCH v3 5/6] kselftest: add fixture variants Jakub Kicinski
@ 2020-03-17 20:37 ` Kees Cook
0 siblings, 0 replies; 17+ messages in thread
From: Kees Cook @ 2020-03-17 20:37 UTC (permalink / raw)
To: Jakub Kicinski
Cc: shuah, luto, wad, linux-kselftest, netdev, linux-kernel,
kernel-team, Tim.Bird
v3.1 ;) My suggestions stand for the expansion of this commit log,
though. :)
-Kees
On Mon, Mar 16, 2020 at 03:56:46PM -0700, Jakub Kicinski wrote:
> Allow users to pass parameters to fixtures.
>
> Each fixture will be evaluated for each of its variants.
>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> --
> v3:
> - separate variant name out with a dot;
> - count variants as "cases" in the opening print.
> ---
> Documentation/dev-tools/kselftest.rst | 3 +-
> tools/testing/selftests/kselftest_harness.h | 145 ++++++++++++++++----
> 2 files changed, 121 insertions(+), 27 deletions(-)
>
> diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst
> index 61ae13c44f91..5d1f56fcd2e7 100644
> --- a/Documentation/dev-tools/kselftest.rst
> +++ b/Documentation/dev-tools/kselftest.rst
> @@ -301,7 +301,8 @@ Helpers
>
> .. kernel-doc:: tools/testing/selftests/kselftest_harness.h
> :functions: TH_LOG TEST TEST_SIGNAL FIXTURE FIXTURE_DATA FIXTURE_SETUP
> - FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN
> + FIXTURE_TEARDOWN TEST_F TEST_HARNESS_MAIN FIXTURE_VARIANT
> + FIXTURE_VARIANT_ADD
>
> Operators
> ---------
> diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
> index 36ab1b92eb35..1a079afa2d01 100644
> --- a/tools/testing/selftests/kselftest_harness.h
> +++ b/tools/testing/selftests/kselftest_harness.h
> @@ -168,9 +168,15 @@
>
> #define __TEST_IMPL(test_name, _signal) \
> static void test_name(struct __test_metadata *_metadata); \
> + static inline void wrapper_##test_name( \
> + struct __test_metadata *_metadata, \
> + struct __fixture_variant_metadata *variant) \
> + { \
> + test_name(_metadata); \
> + } \
> static struct __test_metadata _##test_name##_object = \
> { .name = #test_name, \
> - .fn = &test_name, \
> + .fn = &wrapper_##test_name, \
> .fixture = &_fixture_global, \
> .termsig = _signal, \
> .timeout = TEST_TIMEOUT_DEFAULT, }; \
> @@ -214,6 +220,7 @@
> * populated and cleaned up using FIXTURE_SETUP() and FIXTURE_TEARDOWN().
> */
> #define FIXTURE(fixture_name) \
> + FIXTURE_VARIANT(fixture_name); \
> static struct __fixture_metadata _##fixture_name##_fixture_object = \
> { .name = #fixture_name, }; \
> static void __attribute__((constructor)) \
> @@ -245,7 +252,9 @@
> #define FIXTURE_SETUP(fixture_name) \
> void fixture_name##_setup( \
> struct __test_metadata __attribute__((unused)) *_metadata, \
> - FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
> + FIXTURE_DATA(fixture_name) __attribute__((unused)) *self, \
> + const FIXTURE_VARIANT(fixture_name) __attribute__((unused)) *variant)
> +
> /**
> * FIXTURE_TEARDOWN(fixture_name)
> * *_metadata* is included so that EXPECT_* and ASSERT_* work correctly.
> @@ -267,6 +276,58 @@
> struct __test_metadata __attribute__((unused)) *_metadata, \
> FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
>
> +/**
> + * FIXTURE_VARIANT(fixture_name) - Optionally called once per fixture
> + * to declare fixture variant
> + *
> + * @fixture_name: fixture name
> + *
> + * .. code-block:: c
> + *
> + * FIXTURE_VARIANT(datatype name) {
> + * type property1;
> + * ...
> + * };
> + *
> + * Defines type of constant parameters provided to FIXTURE_SETUP() and TEST_F()
> + * as *variant*. Variants allow the same tests to be run with different
> + * arguments.
> + */
> +#define FIXTURE_VARIANT(fixture_name) struct _fixture_variant_##fixture_name
> +
> +/**
> + * FIXTURE_VARIANT_ADD(fixture_name, variant_name) - Called once per fixture
> + * variant to setup and register the data
> + *
> + * @fixture_name: fixture name
> + * @variant_name: name of the parameter set
> + *
> + * .. code-block:: c
> + *
> + * FIXTURE_ADD(datatype name) {
> + * .property1 = val1;
> + * ...
> + * };
> + *
> + * Defines a variant of the test fixture, provided to FIXTURE_SETUP() and
> + * TEST_F() as *variant*. Tests of each fixture will be run once for each
> + * variant.
> + */
> +#define FIXTURE_VARIANT_ADD(fixture_name, variant_name) \
> + extern FIXTURE_VARIANT(fixture_name) \
> + _##fixture_name##_##variant_name##_variant; \
> + static struct __fixture_variant_metadata \
> + _##fixture_name##_##variant_name##_object = \
> + { .name = #variant_name, \
> + .data = &_##fixture_name##_##variant_name##_variant}; \
> + static void __attribute__((constructor)) \
> + _register_##fixture_name##_##variant_name(void) \
> + { \
> + __register_fixture_variant(&_##fixture_name##_fixture_object, \
> + &_##fixture_name##_##variant_name##_object); \
> + } \
> + FIXTURE_VARIANT(fixture_name) _##fixture_name##_##variant_name##_variant =
> +
> /**
> * TEST_F(fixture_name, test_name) - Emits test registration and helpers for
> * fixture-based test cases
> @@ -297,18 +358,20 @@
> #define __TEST_F_IMPL(fixture_name, test_name, signal, tmout) \
> static void fixture_name##_##test_name( \
> struct __test_metadata *_metadata, \
> - FIXTURE_DATA(fixture_name) *self); \
> + FIXTURE_DATA(fixture_name) *self, \
> + const FIXTURE_VARIANT(fixture_name) *variant); \
> static inline void wrapper_##fixture_name##_##test_name( \
> - struct __test_metadata *_metadata) \
> + struct __test_metadata *_metadata, \
> + struct __fixture_variant_metadata *variant) \
> { \
> /* fixture data is alloced, setup, and torn down per call. */ \
> FIXTURE_DATA(fixture_name) self; \
> memset(&self, 0, sizeof(FIXTURE_DATA(fixture_name))); \
> - fixture_name##_setup(_metadata, &self); \
> + fixture_name##_setup(_metadata, &self, variant->data); \
> /* Let setup failure terminate early. */ \
> if (!_metadata->passed) \
> return; \
> - fixture_name##_##test_name(_metadata, &self); \
> + fixture_name##_##test_name(_metadata, &self, variant->data); \
> fixture_name##_teardown(_metadata, &self); \
> } \
> static struct __test_metadata \
> @@ -326,7 +389,8 @@
> } \
> static void fixture_name##_##test_name( \
> struct __test_metadata __attribute__((unused)) *_metadata, \
> - FIXTURE_DATA(fixture_name) __attribute__((unused)) *self)
> + FIXTURE_DATA(fixture_name) __attribute__((unused)) *self, \
> + const FIXTURE_VARIANT(fixture_name) __attribute__((unused)) *variant)
>
> /**
> * TEST_HARNESS_MAIN - Simple wrapper to run the test harness
> @@ -661,10 +725,12 @@
>
> /* Contains all the information about a fixture */
> struct __test_metadata;
> +struct __fixture_variant_metadata;
>
> struct __fixture_metadata {
> const char *name;
> struct __test_metadata *tests;
> + struct __fixture_variant_metadata *variant;
> struct __fixture_metadata *prev, *next;
> } _fixture_global __attribute__((unused)) = {
> .name = "global",
> @@ -672,7 +738,6 @@ struct __fixture_metadata {
> };
>
> static struct __fixture_metadata *__fixture_list = &_fixture_global;
> -static unsigned int __fixture_count;
> static int __constructor_order;
>
> #define _CONSTRUCTOR_ORDER_FORWARD 1
> @@ -680,14 +745,27 @@ static int __constructor_order;
>
> static inline void __register_fixture(struct __fixture_metadata *f)
> {
> - __fixture_count++;
> __LIST_APPEND(__fixture_list, f);
> }
>
> +struct __fixture_variant_metadata {
> + const char *name;
> + const void *data;
> + struct __fixture_variant_metadata *prev, *next;
> +};
> +
> +static inline void
> +__register_fixture_variant(struct __fixture_metadata *f,
> + struct __fixture_variant_metadata *variant)
> +{
> + __LIST_APPEND(f->variant, variant);
> +}
> +
> /* Contains all the information for test execution and status checking. */
> struct __test_metadata {
> const char *name;
> - void (*fn)(struct __test_metadata *);
> + void (*fn)(struct __test_metadata *,
> + struct __fixture_variant_metadata *);
> struct __fixture_metadata *fixture;
> int termsig;
> int passed;
> @@ -698,9 +776,6 @@ struct __test_metadata {
> struct __test_metadata *prev, *next;
> };
>
> -/* Storage for the (global) tests to be run. */
> -static unsigned int __test_count;
> -
> /*
> * Since constructors are called in reverse order, reverse the test
> * list so tests are run in source declaration order.
> @@ -714,7 +789,6 @@ static inline void __register_test(struct __test_metadata *t)
> {
> struct __fixture_metadata *f = t->fixture;
>
> - __test_count++;
> __LIST_APPEND(f->tests, t);
> }
>
> @@ -729,21 +803,27 @@ static inline int __bail(int for_realz, bool no_print, __u8 step)
> }
>
> void __run_test(struct __fixture_metadata *f,
> + struct __fixture_variant_metadata *variant,
> struct __test_metadata *t)
> {
> pid_t child_pid;
> int status;
>
> + /* reset test struct */
> t->passed = 1;
> t->trigger = 0;
> - printf("[ RUN ] %s.%s\n", f->name, t->name);
> + t->step = 0;
> + t->no_print = 0;
> +
> + printf("[ RUN ] %s%s%s.%s\n",
> + f->name, variant->name[0] ? "." : "", variant->name, t->name);
> alarm(t->timeout);
> child_pid = fork();
> if (child_pid < 0) {
> printf("ERROR SPAWNING TEST CHILD\n");
> t->passed = 0;
> } else if (child_pid == 0) {
> - t->fn(t);
> + t->fn(t, variant);
> /* return the step that failed or 0 */
> _exit(t->passed ? 0 : t->step);
> } else {
> @@ -785,31 +865,44 @@ void __run_test(struct __fixture_metadata *f,
> status);
> }
> }
> - printf("[ %4s ] %s.%s\n", (t->passed ? "OK" : "FAIL"),
> - f->name, t->name);
> + printf("[ %4s ] %s%s%s.%s\n", (t->passed ? "OK" : "FAIL"),
> + f->name, variant->name[0] ? "." : "", variant->name, t->name);
> alarm(0);
> }
>
> static int test_harness_run(int __attribute__((unused)) argc,
> char __attribute__((unused)) **argv)
> {
> + struct __fixture_variant_metadata no_variant = { .name = "", };
> + struct __fixture_variant_metadata *v;
> struct __fixture_metadata *f;
> struct __test_metadata *t;
> int ret = 0;
> + unsigned int case_count = 0, test_count = 0;
> unsigned int count = 0;
> unsigned int pass_count = 0;
>
> + for (f = __fixture_list; f; f = f->next) {
> + for (v = f->variant ?: &no_variant; v; v = v->next) {
> + case_count++;
> + for (t = f->tests; t; t = t->next)
> + test_count++;
> + }
> + }
> +
> /* TODO(wad) add optional arguments similar to gtest. */
> printf("[==========] Running %u tests from %u test cases.\n",
> - __test_count, __fixture_count + 1);
> + test_count, case_count);
> for (f = __fixture_list; f; f = f->next) {
> - for (t = f->tests; t; t = t->next) {
> - count++;
> - __run_test(f, t);
> - if (t->passed)
> - pass_count++;
> - else
> - ret = 1;
> + for (v = f->variant ?: &no_variant; v; v = v->next) {
> + for (t = f->tests; t; t = t->next) {
> + count++;
> + __run_test(f, v, t);
> + if (t->passed)
> + pass_count++;
> + else
> + ret = 1;
> + }
> }
> }
> printf("[==========] %u / %u tests passed.\n", pass_count, count);
> --
> 2.24.1
>
--
Kees Cook
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 6/6] selftests: tls: run all tests for TLS 1.2 and TLS 1.3
2020-03-16 22:56 [PATCH v3 0/6] kselftest: add fixture parameters Jakub Kicinski
` (5 preceding siblings ...)
2020-03-16 22:56 ` [PATCH v3 5/6] kselftest: add fixture variants Jakub Kicinski
@ 2020-03-16 22:56 ` Jakub Kicinski
2020-03-17 20:46 ` Kees Cook
2020-03-16 22:59 ` [PATCH v3 0/6] kselftest: add fixture parameters Jakub Kicinski
7 siblings, 1 reply; 17+ messages in thread
From: Jakub Kicinski @ 2020-03-16 22:56 UTC (permalink / raw)
To: shuah, keescook
Cc: luto, wad, linux-kselftest, netdev, linux-kernel, kernel-team,
Tim.Bird, Jakub Kicinski
TLS 1.2 and TLS 1.3 differ in the implementation.
Use fixture parameters to run all tests for both
versions, and remove the one-off TLS 1.2 test.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
tools/testing/selftests/net/tls.c | 93 ++++++-------------------------
1 file changed, 17 insertions(+), 76 deletions(-)
diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c
index 0ea44d975b6c..c5282e62df75 100644
--- a/tools/testing/selftests/net/tls.c
+++ b/tools/testing/selftests/net/tls.c
@@ -101,6 +101,21 @@ FIXTURE(tls)
bool notls;
};
+FIXTURE_VARIANT(tls)
+{
+ unsigned int tls_version;
+};
+
+FIXTURE_VARIANT_ADD(tls, 12)
+{
+ .tls_version = TLS_1_2_VERSION,
+};
+
+FIXTURE_VARIANT_ADD(tls, 13)
+{
+ .tls_version = TLS_1_3_VERSION,
+};
+
FIXTURE_SETUP(tls)
{
struct tls12_crypto_info_aes_gcm_128 tls12;
@@ -112,7 +127,7 @@ FIXTURE_SETUP(tls)
len = sizeof(addr);
memset(&tls12, 0, sizeof(tls12));
- tls12.info.version = TLS_1_3_VERSION;
+ tls12.info.version = variant->tls_version;
tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
addr.sin_family = AF_INET;
@@ -733,7 +748,7 @@ TEST_F(tls, bidir)
struct tls12_crypto_info_aes_gcm_128 tls12;
memset(&tls12, 0, sizeof(tls12));
- tls12.info.version = TLS_1_3_VERSION;
+ tls12.info.version = variant->tls_version;
tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
ret = setsockopt(self->fd, SOL_TLS, TLS_RX, &tls12,
@@ -1258,78 +1273,4 @@ TEST(keysizes) {
close(cfd);
}
-TEST(tls12) {
- int fd, cfd;
- bool notls;
-
- struct tls12_crypto_info_aes_gcm_128 tls12;
- struct sockaddr_in addr;
- socklen_t len;
- int sfd, ret;
-
- notls = false;
- len = sizeof(addr);
-
- memset(&tls12, 0, sizeof(tls12));
- tls12.info.version = TLS_1_2_VERSION;
- tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
-
- addr.sin_family = AF_INET;
- addr.sin_addr.s_addr = htonl(INADDR_ANY);
- addr.sin_port = 0;
-
- fd = socket(AF_INET, SOCK_STREAM, 0);
- sfd = socket(AF_INET, SOCK_STREAM, 0);
-
- ret = bind(sfd, &addr, sizeof(addr));
- ASSERT_EQ(ret, 0);
- ret = listen(sfd, 10);
- ASSERT_EQ(ret, 0);
-
- ret = getsockname(sfd, &addr, &len);
- ASSERT_EQ(ret, 0);
-
- ret = connect(fd, &addr, sizeof(addr));
- ASSERT_EQ(ret, 0);
-
- ret = setsockopt(fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
- if (ret != 0) {
- notls = true;
- printf("Failure setting TCP_ULP, testing without tls\n");
- }
-
- if (!notls) {
- ret = setsockopt(fd, SOL_TLS, TLS_TX, &tls12,
- sizeof(tls12));
- ASSERT_EQ(ret, 0);
- }
-
- cfd = accept(sfd, &addr, &len);
- ASSERT_GE(cfd, 0);
-
- if (!notls) {
- ret = setsockopt(cfd, IPPROTO_TCP, TCP_ULP, "tls",
- sizeof("tls"));
- ASSERT_EQ(ret, 0);
-
- ret = setsockopt(cfd, SOL_TLS, TLS_RX, &tls12,
- sizeof(tls12));
- ASSERT_EQ(ret, 0);
- }
-
- close(sfd);
-
- char const *test_str = "test_read";
- int send_len = 10;
- char buf[10];
-
- send_len = strlen(test_str) + 1;
- EXPECT_EQ(send(fd, test_str, send_len, 0), send_len);
- EXPECT_NE(recv(cfd, buf, send_len, 0), -1);
- EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
-
- close(fd);
- close(cfd);
-}
-
TEST_HARNESS_MAIN
--
2.24.1
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v3 6/6] selftests: tls: run all tests for TLS 1.2 and TLS 1.3
2020-03-16 22:56 ` [PATCH v3 6/6] selftests: tls: run all tests for TLS 1.2 and TLS 1.3 Jakub Kicinski
@ 2020-03-17 20:46 ` Kees Cook
0 siblings, 0 replies; 17+ messages in thread
From: Kees Cook @ 2020-03-17 20:46 UTC (permalink / raw)
To: Jakub Kicinski
Cc: shuah, luto, wad, linux-kselftest, netdev, linux-kernel,
kernel-team, Tim.Bird
On Mon, Mar 16, 2020 at 03:56:47PM -0700, Jakub Kicinski wrote:
> TLS 1.2 and TLS 1.3 differ in the implementation.
> Use fixture parameters to run all tests for both
> versions, and remove the one-off TLS 1.2 test.
>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> ---
> tools/testing/selftests/net/tls.c | 93 ++++++-------------------------
> 1 file changed, 17 insertions(+), 76 deletions(-)
The diffstat alone justifies the variants feature! :) Thanks for this!
Acked-by: Kees Cook <keescook@chromium.org>
-Kees
>
> diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c
> index 0ea44d975b6c..c5282e62df75 100644
> --- a/tools/testing/selftests/net/tls.c
> +++ b/tools/testing/selftests/net/tls.c
> @@ -101,6 +101,21 @@ FIXTURE(tls)
> bool notls;
> };
>
> +FIXTURE_VARIANT(tls)
> +{
> + unsigned int tls_version;
> +};
> +
> +FIXTURE_VARIANT_ADD(tls, 12)
> +{
> + .tls_version = TLS_1_2_VERSION,
> +};
> +
> +FIXTURE_VARIANT_ADD(tls, 13)
> +{
> + .tls_version = TLS_1_3_VERSION,
> +};
> +
> FIXTURE_SETUP(tls)
> {
> struct tls12_crypto_info_aes_gcm_128 tls12;
> @@ -112,7 +127,7 @@ FIXTURE_SETUP(tls)
> len = sizeof(addr);
>
> memset(&tls12, 0, sizeof(tls12));
> - tls12.info.version = TLS_1_3_VERSION;
> + tls12.info.version = variant->tls_version;
> tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
>
> addr.sin_family = AF_INET;
> @@ -733,7 +748,7 @@ TEST_F(tls, bidir)
> struct tls12_crypto_info_aes_gcm_128 tls12;
>
> memset(&tls12, 0, sizeof(tls12));
> - tls12.info.version = TLS_1_3_VERSION;
> + tls12.info.version = variant->tls_version;
> tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
>
> ret = setsockopt(self->fd, SOL_TLS, TLS_RX, &tls12,
> @@ -1258,78 +1273,4 @@ TEST(keysizes) {
> close(cfd);
> }
>
> -TEST(tls12) {
> - int fd, cfd;
> - bool notls;
> -
> - struct tls12_crypto_info_aes_gcm_128 tls12;
> - struct sockaddr_in addr;
> - socklen_t len;
> - int sfd, ret;
> -
> - notls = false;
> - len = sizeof(addr);
> -
> - memset(&tls12, 0, sizeof(tls12));
> - tls12.info.version = TLS_1_2_VERSION;
> - tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
> -
> - addr.sin_family = AF_INET;
> - addr.sin_addr.s_addr = htonl(INADDR_ANY);
> - addr.sin_port = 0;
> -
> - fd = socket(AF_INET, SOCK_STREAM, 0);
> - sfd = socket(AF_INET, SOCK_STREAM, 0);
> -
> - ret = bind(sfd, &addr, sizeof(addr));
> - ASSERT_EQ(ret, 0);
> - ret = listen(sfd, 10);
> - ASSERT_EQ(ret, 0);
> -
> - ret = getsockname(sfd, &addr, &len);
> - ASSERT_EQ(ret, 0);
> -
> - ret = connect(fd, &addr, sizeof(addr));
> - ASSERT_EQ(ret, 0);
> -
> - ret = setsockopt(fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
> - if (ret != 0) {
> - notls = true;
> - printf("Failure setting TCP_ULP, testing without tls\n");
> - }
> -
> - if (!notls) {
> - ret = setsockopt(fd, SOL_TLS, TLS_TX, &tls12,
> - sizeof(tls12));
> - ASSERT_EQ(ret, 0);
> - }
> -
> - cfd = accept(sfd, &addr, &len);
> - ASSERT_GE(cfd, 0);
> -
> - if (!notls) {
> - ret = setsockopt(cfd, IPPROTO_TCP, TCP_ULP, "tls",
> - sizeof("tls"));
> - ASSERT_EQ(ret, 0);
> -
> - ret = setsockopt(cfd, SOL_TLS, TLS_RX, &tls12,
> - sizeof(tls12));
> - ASSERT_EQ(ret, 0);
> - }
> -
> - close(sfd);
> -
> - char const *test_str = "test_read";
> - int send_len = 10;
> - char buf[10];
> -
> - send_len = strlen(test_str) + 1;
> - EXPECT_EQ(send(fd, test_str, send_len, 0), send_len);
> - EXPECT_NE(recv(cfd, buf, send_len, 0), -1);
> - EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
> -
> - close(fd);
> - close(cfd);
> -}
> -
> TEST_HARNESS_MAIN
> --
> 2.24.1
>
--
Kees Cook
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v3 0/6] kselftest: add fixture parameters
2020-03-16 22:56 [PATCH v3 0/6] kselftest: add fixture parameters Jakub Kicinski
` (6 preceding siblings ...)
2020-03-16 22:56 ` [PATCH v3 6/6] selftests: tls: run all tests for TLS 1.2 and TLS 1.3 Jakub Kicinski
@ 2020-03-16 22:59 ` Jakub Kicinski
2020-03-17 20:47 ` Kees Cook
7 siblings, 1 reply; 17+ messages in thread
From: Jakub Kicinski @ 2020-03-16 22:59 UTC (permalink / raw)
To: shuah, keescook
Cc: luto, wad, linux-kselftest, netdev, linux-kernel, kernel-team, Tim.Bird
On Mon, 16 Mar 2020 15:56:40 -0700 Jakub Kicinski wrote:
> Hi!
>
> Shuah please consider applying to the kselftest tree.
>
> This set is an attempt to make running tests for different
> sets of data easier. The direct motivation is the tls
> test which we'd like to run for TLS 1.2 and TLS 1.3,
> but currently there is no easy way to invoke the same
> tests with different parameters.
>
> Tested all users of kselftest_harness.h.
>
> v2:
> - don't run tests by fixture
> - don't pass params as an explicit argument
>
> v3:
> - go back to the orginal implementation with an extra
> parameter, and running by fixture (Kees);
> - add LIST_APPEND helper (Kees);
> - add a dot between fixture and param name (Kees);
> - rename the params to variants (Tim);
>
> v1: https://lore.kernel.org/netdev/20200313031752.2332565-1-kuba@kernel.org/
> v2: https://lore.kernel.org/netdev/20200314005501.2446494-1-kuba@kernel.org/
Ugh, sorry I forgot to realign things after the rename :S
I'll send a whitespace-only v4 in a hour, allowing a little bit
of time in case there are some comments already.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v3 0/6] kselftest: add fixture parameters
2020-03-16 22:59 ` [PATCH v3 0/6] kselftest: add fixture parameters Jakub Kicinski
@ 2020-03-17 20:47 ` Kees Cook
0 siblings, 0 replies; 17+ messages in thread
From: Kees Cook @ 2020-03-17 20:47 UTC (permalink / raw)
To: Jakub Kicinski
Cc: shuah, luto, wad, linux-kselftest, netdev, linux-kernel,
kernel-team, Tim.Bird
On Mon, Mar 16, 2020 at 03:59:17PM -0700, Jakub Kicinski wrote:
> On Mon, 16 Mar 2020 15:56:40 -0700 Jakub Kicinski wrote:
> > Hi!
> >
> > Shuah please consider applying to the kselftest tree.
> >
> > This set is an attempt to make running tests for different
> > sets of data easier. The direct motivation is the tls
> > test which we'd like to run for TLS 1.2 and TLS 1.3,
> > but currently there is no easy way to invoke the same
> > tests with different parameters.
> >
> > Tested all users of kselftest_harness.h.
> >
> > v2:
> > - don't run tests by fixture
> > - don't pass params as an explicit argument
> >
> > v3:
> > - go back to the orginal implementation with an extra
> > parameter, and running by fixture (Kees);
> > - add LIST_APPEND helper (Kees);
> > - add a dot between fixture and param name (Kees);
> > - rename the params to variants (Tim);
> >
> > v1: https://lore.kernel.org/netdev/20200313031752.2332565-1-kuba@kernel.org/
> > v2: https://lore.kernel.org/netdev/20200314005501.2446494-1-kuba@kernel.org/
>
> Ugh, sorry I forgot to realign things after the rename :S
>
> I'll send a whitespace-only v4 in a hour, allowing a little bit
> of time in case there are some comments already.
No worries! I think a few small changes are needed for a v5 (please
carry my Acked-bys with for v5). Thanks for working on this; I love it!
:)
-Kees
--
Kees Cook
^ permalink raw reply [flat|nested] 17+ messages in thread