From: Wong Vee Khee <vee.khee.wong@intel.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S . Miller" <davem@davemloft.net>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Ong Boon Leong <boon.leong.ong@intel.com>,
Voon Wei Feng <weifeng.voon@intel.com>,
Wong Vee Khee <vee.khee.wong@intel.com>
Subject: [PATCH net-next 1/1] net: stmmac: Add option for VLAN filter fail queue enable
Date: Thu, 23 Apr 2020 15:00:26 +0800 [thread overview]
Message-ID: <20200423070026.26200-1-vee.khee.wong@intel.com> (raw)
From: "Chuah, Kim Tatt" <kim.tatt.chuah@intel.com>
Add option in plat_stmmacenet_data struct to enable VLAN Filter Fail
Queuing. This option allows packets that fail VLAN filter to be routed
to a specific Rx queue when Receive All is also set.
When this option is enabled:
- Enable VFFQ only when entering promiscuous mode, because Receive All
will pass up all rx packets that failed address filtering (similar to
promiscuous mode).
- VLAN-promiscuous mode is never entered to allow rx packet to fail VLAN
filters and get routed to selected VFFQ Rx queue.
Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
Reviewed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 2 ++
drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 15 +++++++++++++--
drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 6 ++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
include/linux/stmmac.h | 2 ++
6 files changed, 27 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index 127f75862962..52e6d1ef7176 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -474,6 +474,8 @@ struct mac_device_info {
unsigned int num_vlan;
u32 vlan_filter[32];
unsigned int promisc;
+ bool vlan_fail_q_en;
+ u8 vlan_fail_q;
};
struct stmmac_rx_routing {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index 61f3249bd724..592b043f9676 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -76,6 +76,7 @@
#define GMAC_PACKET_FILTER_HPF BIT(10)
#define GMAC_PACKET_FILTER_VTFE BIT(16)
#define GMAC_PACKET_FILTER_IPFE BIT(20)
+#define GMAC_PACKET_FILTER_RA BIT(31)
#define GMAC_MAX_PERFECT_ADDRESSES 128
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index ecd834e0e121..002791b77356 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -618,7 +618,18 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
value &= ~GMAC_PACKET_FILTER_PM;
value &= ~GMAC_PACKET_FILTER_PR;
if (dev->flags & IFF_PROMISC) {
- value = GMAC_PACKET_FILTER_PR | GMAC_PACKET_FILTER_PCF;
+ /* VLAN Tag Filter Fail Packets Queuing */
+ if (hw->vlan_fail_q_en) {
+ value = readl(ioaddr + GMAC_RXQ_CTRL4);
+ value &= ~GMAC_RXQCTRL_VFFQ_MASK;
+ value |= GMAC_RXQCTRL_VFFQE |
+ (hw->vlan_fail_q << GMAC_RXQCTRL_VFFQ_SHIFT);
+ writel(value, ioaddr + GMAC_RXQ_CTRL4);
+ value = GMAC_PACKET_FILTER_PR | GMAC_PACKET_FILTER_RA;
+ } else {
+ value = GMAC_PACKET_FILTER_PR | GMAC_PACKET_FILTER_PCF;
+ }
+
} else if ((dev->flags & IFF_ALLMULTI) ||
(netdev_mc_count(dev) > hw->multicast_filter_bins)) {
/* Pass all multi */
@@ -680,7 +691,7 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
writel(value, ioaddr + GMAC_PACKET_FILTER);
- if (dev->flags & IFF_PROMISC) {
+ if (dev->flags & IFF_PROMISC && !hw->vlan_fail_q_en) {
if (!hw->promisc) {
hw->promisc = 1;
dwmac4_vlan_promisc_enable(dev, hw);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
index 3e8faa96b4d4..64530deb55ba 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
@@ -92,6 +92,12 @@
#define TCEIE BIT(0)
#define DMA_ECC_INT_STATUS 0x00001088
+/* EQoS version 5.xx VLAN Tag Filter Fail Packets Queuing */
+#define GMAC_RXQ_CTRL4 0x00000094
+#define GMAC_RXQCTRL_VFFQ_MASK GENMASK(19, 17)
+#define GMAC_RXQCTRL_VFFQ_SHIFT 17
+#define GMAC_RXQCTRL_VFFQE BIT(16)
+
int dwmac5_safety_feat_config(void __iomem *ioaddr, unsigned int asp);
int dwmac5_safety_feat_irq_status(struct net_device *ndev,
void __iomem *ioaddr, unsigned int asp,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e6898fd5223f..27d9bf98c908 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4723,6 +4723,9 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
if (priv->dma_cap.tsoen)
dev_info(priv->device, "TSO supported\n");
+ priv->hw->vlan_fail_q_en = priv->plat->vlan_fail_q_en;
+ priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;
+
/* Run HW quirks, if any */
if (priv->hwif_quirks) {
ret = priv->hwif_quirks(priv);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index fbafb353e9be..f4287f363031 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -196,5 +196,7 @@ struct plat_stmmacenet_data {
int mac_port_sel_speed;
bool en_tx_lpi_clockgating;
int has_xgmac;
+ bool vlan_fail_q_en;
+ u8 vlan_fail_q;
};
#endif
--
2.17.0
next reply other threads:[~2020-04-23 6:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-23 7:00 Wong Vee Khee [this message]
2020-04-23 22:53 ` [PATCH net-next 1/1] net: stmmac: Add option for VLAN filter fail queue enable David Miller
2020-05-06 3:31 ` Wong, Vee Khee
2020-09-25 9:40 [PATCH net-next 0/1] net: stmmac: Enable VLAN filter fail queue for Intel platform data Wong Vee Khee
2020-09-25 9:40 ` [PATCH net-next 1/1] net: stmmac: Add option for VLAN filter fail queue enable Wong Vee Khee
2020-09-25 23:48 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200423070026.26200-1-vee.khee.wong@intel.com \
--to=vee.khee.wong@intel.com \
--cc=alexandre.torgue@st.com \
--cc=boon.leong.ong@intel.com \
--cc=davem@davemloft.net \
--cc=joabreu@synopsys.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=weifeng.voon@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).