[PATCH AUTOSEL 4.19 001/106] ath9x: Fix stack-out-of-bounds Write in ath9k_hif_usb_rx_cb

[PATCH AUTOSEL 4.19 001/106] ath9x: Fix stack-out-of-bounds Write in ath9k_hif_usb_rx_cb

[Sasha Levin]

From: Qiujun Huang <hqjagain@gmail.com>

[ Upstream commit 19d6c375d671ce9949a864fb9a03e19f5487b4d3 ]

Add barrier to accessing the stack array skb_pool.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/0000000000003d7c1505a2168418@google.com
BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_stream
drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline]
BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
Write of size 8 at addr ffff8881db309a28 by task swapper/1/0

Call Trace:
ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626
[inline]
ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
__usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1648
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1713
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786

Reported-and-tested-by: syzbot+d403396d4df67ad0bd5f@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-5-hqjagain@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index dd0c32379375..c4a2b7201ce3 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -612,6 +612,11 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 			hif_dev->remain_skb = nskb;
 			spin_unlock(&hif_dev->rx_lock);
 		} else {
+			if (pool_index == MAX_PKT_NUM_IN_TRANSFER) {
+				dev_err(&hif_dev->udev->dev,
+					"ath9k_htc: over RX MAX_PKT_NUM\n");
+				goto err;
+			}
 			nskb = __dev_alloc_skb(pkt_len + 32, GFP_ATOMIC);
 			if (!nskb) {
 				dev_err(&hif_dev->udev->dev,
-- 
2.25.1

[PATCH AUTOSEL 4.19 002/106] ath9k: Fix use-after-free Write in ath9k_htc_rx_msg

[Sasha Levin]

From: Qiujun Huang <hqjagain@gmail.com>

[ Upstream commit e4ff08a4d727146bb6717a39a8d399d834654345 ]

Write out of slab bounds. We should check epid.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/0000000000006ac55b05a1c05d72@google.com
BUG: KASAN: use-after-free in htc_process_conn_rsp
drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline]
BUG: KASAN: use-after-free in ath9k_htc_rx_msg+0xa25/0xaf0
drivers/net/wireless/ath/ath9k/htc_hst.c:443
Write of size 2 at addr ffff8881cea291f0 by task swapper/1/0

Call Trace:
 htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131
[inline]
ath9k_htc_rx_msg+0xa25/0xaf0
drivers/net/wireless/ath/ath9k/htc_hst.c:443
ath9k_hif_usb_reg_in_cb+0x1ba/0x630
drivers/net/wireless/ath/ath9k/hif_usb.c:718
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786

Reported-and-tested-by: syzbot+b1c61e5f11be5782f192@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-4-hqjagain@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/htc_hst.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index 1bf63a4efb4c..d2e062eaf561 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -113,6 +113,9 @@ static void htc_process_conn_rsp(struct htc_target *target,
 
 	if (svc_rspmsg->status == HTC_SERVICE_SUCCESS) {
 		epid = svc_rspmsg->endpoint_id;
+		if (epid < 0 || epid >= ENDPOINT_MAX)
+			return;
+
 		service_id = be16_to_cpu(svc_rspmsg->service_id);
 		max_msglen = be16_to_cpu(svc_rspmsg->max_msg_len);
 		endpoint = &target->endpoint[epid];
-- 
2.25.1

[PATCH AUTOSEL 4.19 008/106] net: atlantic: make hw_get_regs optional

[Sasha Levin]

From: Mark Starovoytov <mstarovoitov@marvell.com>

[ Upstream commit d0f23741c202c685447050713907f3be39a985ee ]

This patch fixes potential crash in case if hw_get_regs is NULL.

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
index 15dcfb6704e5..adac5df0d6b4 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
@@ -620,6 +620,9 @@ int aq_nic_get_regs(struct aq_nic_s *self, struct ethtool_regs *regs, void *p)
 	u32 *regs_buff = p;
 	int err = 0;
 
+	if (unlikely(!self->aq_hw_ops->hw_get_regs))
+		return -EOPNOTSUPP;
+
 	regs->version = 1;
 
 	err = self->aq_hw_ops->hw_get_regs(self->aq_hw,
@@ -634,6 +637,9 @@ int aq_nic_get_regs(struct aq_nic_s *self, struct ethtool_regs *regs, void *p)
 
 int aq_nic_get_regs_count(struct aq_nic_s *self)
 {
+	if (unlikely(!self->aq_hw_ops->hw_get_regs))
+		return 0;
+
 	return self->aq_nic_cfg.aq_hw_caps->mac_regs_count;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 009/106] net: ena: fix error returning in ena_com_get_hash_function()

[Sasha Levin]

From: Arthur Kiyanovski <akiyano@amazon.com>

[ Upstream commit e9a1de378dd46375f9abfd8de1e6f59ee114a793 ]

In case the "func" parameter is NULL we now return "-EINVAL".
This shouldn't happen in general, but when it does happen, this is the
proper way to handle it.

We also check func for NULL in the beginning of the function, as there
is no reason to do all the work and realize in the end of the function
it was useless.

Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index 3afc0e59a2bd..d07f7f65169a 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -2137,6 +2137,9 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
 		rss->hash_key;
 	int rc;
 
+	if (unlikely(!func))
+		return -EINVAL;
+
 	rc = ena_com_get_feature_ex(ena_dev, &get_resp,
 				    ENA_ADMIN_RSS_HASH_FUNCTION,
 				    rss->hash_key_dma_addr,
@@ -2149,8 +2152,7 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
 	if (rss->hash_func)
 		rss->hash_func--;
 
-	if (func)
-		*func = rss->hash_func;
+	*func = rss->hash_func;
 
 	if (key)
 		memcpy(key, hash_key->key, (size_t)(hash_key->keys_num) << 2);
-- 
2.25.1

[PATCH AUTOSEL 4.19 015/106] ixgbe: Fix XDP redirect on archs with PAGE_SIZE above 4K

[Sasha Levin]

From: Jesper Dangaard Brouer <brouer@redhat.com>

[ Upstream commit 88eb0ee17b2ece64fcf6689a4557a5c2e7a89c4b ]

The ixgbe driver have another memory model when compiled on archs with
PAGE_SIZE above 4096 bytes. In this mode it doesn't split the page in
two halves, but instead increment rx_buffer->page_offset by truesize of
packet (which include headroom and tailroom for skb_shared_info).

This is done correctly in ixgbe_build_skb(), but in ixgbe_rx_buffer_flip
which is currently only called on XDP_TX and XDP_REDIRECT, it forgets
to add the tailroom for skb_shared_info. This breaks XDP_REDIRECT, for
veth and cpumap.  Fix by adding size of skb_shared_info tailroom.

Maintainers notice: This fix have been queued to Jeff.

Fixes: 6453073987ba ("ixgbe: add initial support for xdp redirect")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Link: https://lore.kernel.org/bpf/158945344946.97035.17031588499266605743.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 8177276500f5..7d723b70fcf6 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2258,7 +2258,8 @@ static void ixgbe_rx_buffer_flip(struct ixgbe_ring *rx_ring,
 	rx_buffer->page_offset ^= truesize;
 #else
 	unsigned int truesize = ring_uses_build_skb(rx_ring) ?
-				SKB_DATA_ALIGN(IXGBE_SKB_PAD + size) :
+				SKB_DATA_ALIGN(IXGBE_SKB_PAD + size) +
+				SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
 				SKB_DATA_ALIGN(size);
 
 	rx_buffer->page_offset += truesize;
-- 
2.25.1

[PATCH AUTOSEL 4.19 017/106] Bluetooth: Add SCO fallback for invalid LMP parameters error

[Sasha Levin]

From: Hsin-Yu Chao <hychao@chromium.org>

[ Upstream commit 56b5453a86203a44726f523b4133c1feca49ce7c ]

Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection
with invalid parameter at the first SCO request expecting AG to
attempt another SCO request with the use of "safe settings" for
given codec, base on section 5.7.1.2 of HFP 1.7 specification.

This patch addresses it by adding "Invalid LMP Parameters" (0x1e)
to the SCO fallback case. Verified with below log:

< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
        Handle: 256
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x0380
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
> HCI Event: Number of Completed Packets (0x13) plen 5
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
        Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e)
        Handle: 0
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x00
        Retransmission window: 0x02
        RX packet length: 0
        TX packet length: 0
        Air mode: Transparent (0x03)
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
        Handle: 256
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 8
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x03c8
          EV3 may be used
          2-EV3 may not be used
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 5
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
        Status: Success (0x00)
        Handle: 257
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x06
        Retransmission window: 0x04
        RX packet length: 30
        TX packet length: 30
        Air mode: Transparent (0x03)

Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 3e7badb3ac2d..a044e6bb12b8 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4097,6 +4097,7 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
 	case 0x11:	/* Unsupported Feature or Parameter Value */
 	case 0x1c:	/* SCO interval rejected */
 	case 0x1a:	/* Unsupported Remote Feature */
+	case 0x1e:	/* Invalid LMP Parameters */
 	case 0x1f:	/* Unspecified error */
 	case 0x20:	/* Unsupported LMP Parameter value */
 		if (conn->out) {
-- 
2.25.1

[PATCH AUTOSEL 4.19 025/106] batman-adv: Revert "disable ethtool link speed detection when auto negotiation off"

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 9ad346c90509ebd983f60da7d082f261ad329507 ]

The commit 8c46fcd78308 ("batman-adv: disable ethtool link speed detection
when auto negotiation off") disabled the usage of ethtool's link_ksetting
when auto negotation was enabled due to invalid values when used with
tun/tap virtual net_devices. According to the patch, automatic measurements
should be used for these kind of interfaces.

But there are major flaws with this argumentation:

* automatic measurements are not implemented
* auto negotiation has nothing to do with the validity of the retrieved
  values

The first point has to be fixed by a longer patch series. The "validity"
part of the second point must be addressed in the same patch series by
dropping the usage of ethtool's link_ksetting (thus always doing automatic
measurements over ethernet).

Drop the patch again to have more default values for various net_device
types/configurations. The user can still overwrite them using the
batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE.

Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_v_elp.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index 5da183b2f4c9..af3da6cdfc79 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -132,20 +132,7 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
 	rtnl_lock();
 	ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings);
 	rtnl_unlock();
-
-	/* Virtual interface drivers such as tun / tap interfaces, VLAN, etc
-	 * tend to initialize the interface throughput with some value for the
-	 * sake of having a throughput number to export via ethtool. This
-	 * exported throughput leaves batman-adv to conclude the interface
-	 * throughput is genuine (reflecting reality), thus no measurements
-	 * are necessary.
-	 *
-	 * Based on the observation that those interface types also tend to set
-	 * the link auto-negotiation to 'off', batman-adv shall check this
-	 * setting to differentiate between genuine link throughput information
-	 * and placeholders installed by virtual interfaces.
-	 */
-	if (ret == 0 && link_settings.base.autoneg == AUTONEG_ENABLE) {
+	if (ret == 0) {
 		/* link characteristics might change over time */
 		if (link_settings.base.duplex == DUPLEX_FULL)
 			hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
-- 
2.25.1

[PATCH AUTOSEL 4.19 029/106] net: vmxnet3: fix possible buffer overflow caused by bad DMA value in vmxnet3_get_rss()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 3e1c6846b9e108740ef8a37be80314053f5dd52a ]

The value adapter->rss_conf is stored in DMA memory, and it is assigned
to rssConf, so rssConf->indTableSize can be modified at anytime by
malicious hardware. Because rssConf->indTableSize is assigned to n,
buffer overflow may occur when the code "rssConf->indTable[n]" is
executed.

To fix this possible bug, n is checked after being used.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vmxnet3/vmxnet3_ethtool.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c
index 559db051a500..88d18ab83e54 100644
--- a/drivers/net/vmxnet3/vmxnet3_ethtool.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c
@@ -692,6 +692,8 @@ vmxnet3_get_rss(struct net_device *netdev, u32 *p, u8 *key, u8 *hfunc)
 		*hfunc = ETH_RSS_HASH_TOP;
 	if (!p)
 		return 0;
+	if (n > UPT1_RSS_MAX_IND_TABLE_SIZE)
+		return 0;
 	while (n--)
 		p[n] = rssConf->indTable[n];
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 4.19 031/106] ath9k: Fix use-after-free Read in ath9k_wmi_ctrl_rx

[Sasha Levin]

From: Qiujun Huang <hqjagain@gmail.com>

[ Upstream commit abeaa85054ff8cfe8b99aafc5c70ea067e5d0908 ]

Free wmi later after cmd urb has been killed, as urb cb will access wmi.

the case reported by syzbot:
https://lore.kernel.org/linux-usb/0000000000000002fc05a1d61a68@google.com
BUG: KASAN: use-after-free in ath9k_wmi_ctrl_rx+0x416/0x500
drivers/net/wireless/ath/ath9k/wmi.c:215
Read of size 1 at addr ffff8881cef1417c by task swapper/1/0

Call Trace:
<IRQ>
ath9k_wmi_ctrl_rx+0x416/0x500 drivers/net/wireless/ath/ath9k/wmi.c:215
ath9k_htc_rx_msg+0x2da/0xaf0
drivers/net/wireless/ath/ath9k/htc_hst.c:459
ath9k_hif_usb_reg_in_cb+0x1ba/0x630
drivers/net/wireless/ath/ath9k/hif_usb.c:718
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786

Reported-and-tested-by: syzbot+5d338854440137ea0fef@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-3-hqjagain@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c      |  5 +++--
 drivers/net/wireless/ath/ath9k/hif_usb.h      |  1 +
 drivers/net/wireless/ath/ath9k/htc_drv_init.c | 10 +++++++---
 drivers/net/wireless/ath/ath9k/wmi.c          |  5 ++++-
 drivers/net/wireless/ath/ath9k/wmi.h          |  3 ++-
 5 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index c4a2b7201ce3..6049d3766c64 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -978,7 +978,7 @@ static int ath9k_hif_usb_alloc_urbs(struct hif_device_usb *hif_dev)
 	return -ENOMEM;
 }
 
-static void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev)
+void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev)
 {
 	usb_kill_anchored_urbs(&hif_dev->regout_submitted);
 	ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
@@ -1346,8 +1346,9 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface)
 
 	if (hif_dev->flags & HIF_USB_READY) {
 		ath9k_htc_hw_deinit(hif_dev->htc_handle, unplugged);
-		ath9k_htc_hw_free(hif_dev->htc_handle);
 		ath9k_hif_usb_dev_deinit(hif_dev);
+		ath9k_destoy_wmi(hif_dev->htc_handle->drv_priv);
+		ath9k_htc_hw_free(hif_dev->htc_handle);
 	}
 
 	usb_set_intfdata(interface, NULL);
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
index 7846916aa01d..a94e7e1c86e9 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -133,5 +133,6 @@ struct hif_device_usb {
 
 int ath9k_hif_usb_init(void);
 void ath9k_hif_usb_exit(void);
+void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev);
 
 #endif /* HTC_USB_H */
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 214c68269a69..27d9fe6799f5 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -933,8 +933,9 @@ static int ath9k_init_device(struct ath9k_htc_priv *priv,
 int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 			   u16 devid, char *product, u32 drv_info)
 {
-	struct ieee80211_hw *hw;
+	struct hif_device_usb *hif_dev;
 	struct ath9k_htc_priv *priv;
+	struct ieee80211_hw *hw;
 	int ret;
 
 	hw = ieee80211_alloc_hw(sizeof(struct ath9k_htc_priv), &ath9k_htc_ops);
@@ -969,7 +970,10 @@ int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 	return 0;
 
 err_init:
-	ath9k_deinit_wmi(priv);
+	ath9k_stop_wmi(priv);
+	hif_dev = (struct hif_device_usb *)htc_handle->hif_dev;
+	ath9k_hif_usb_dealloc_urbs(hif_dev);
+	ath9k_destoy_wmi(priv);
 err_free:
 	ieee80211_free_hw(hw);
 	return ret;
@@ -984,7 +988,7 @@ void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug)
 			htc_handle->drv_priv->ah->ah_flags |= AH_UNPLUGGED;
 
 		ath9k_deinit_device(htc_handle->drv_priv);
-		ath9k_deinit_wmi(htc_handle->drv_priv);
+		ath9k_stop_wmi(htc_handle->drv_priv);
 		ieee80211_free_hw(htc_handle->drv_priv->hw);
 	}
 }
diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index d1f6710ca63b..e7a3127395be 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -112,14 +112,17 @@ struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv)
 	return wmi;
 }
 
-void ath9k_deinit_wmi(struct ath9k_htc_priv *priv)
+void ath9k_stop_wmi(struct ath9k_htc_priv *priv)
 {
 	struct wmi *wmi = priv->wmi;
 
 	mutex_lock(&wmi->op_mutex);
 	wmi->stopped = true;
 	mutex_unlock(&wmi->op_mutex);
+}
 
+void ath9k_destoy_wmi(struct ath9k_htc_priv *priv)
+{
 	kfree(priv->wmi);
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/wmi.h b/drivers/net/wireless/ath/ath9k/wmi.h
index 380175d5ecd7..d8b912206232 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.h
+++ b/drivers/net/wireless/ath/ath9k/wmi.h
@@ -179,7 +179,6 @@ struct wmi {
 };
 
 struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv);
-void ath9k_deinit_wmi(struct ath9k_htc_priv *priv);
 int ath9k_wmi_connect(struct htc_target *htc, struct wmi *wmi,
 		      enum htc_endpoint_id *wmi_ctrl_epid);
 int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
@@ -189,6 +188,8 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 void ath9k_wmi_event_tasklet(unsigned long data);
 void ath9k_fatal_work(struct work_struct *work);
 void ath9k_wmi_event_drain(struct ath9k_htc_priv *priv);
+void ath9k_stop_wmi(struct ath9k_htc_priv *priv);
+void ath9k_destoy_wmi(struct ath9k_htc_priv *priv);
 
 #define WMI_CMD(_wmi_cmd)						\
 	do {								\
-- 
2.25.1

[PATCH AUTOSEL 4.19 032/106] ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb

[Sasha Levin]

From: Qiujun Huang <hqjagain@gmail.com>

[ Upstream commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 ]

In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0

Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829

Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 48 ++++++++++++++++++------
 drivers/net/wireless/ath/ath9k/hif_usb.h |  5 +++
 2 files changed, 42 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 6049d3766c64..4ed21dad6a8e 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -643,9 +643,9 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 
 static void ath9k_hif_usb_rx_cb(struct urb *urb)
 {
-	struct sk_buff *skb = (struct sk_buff *) urb->context;
-	struct hif_device_usb *hif_dev =
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+	struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+	struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+	struct sk_buff *skb = rx_buf->skb;
 	int ret;
 
 	if (!skb)
@@ -685,14 +685,15 @@ static void ath9k_hif_usb_rx_cb(struct urb *urb)
 	return;
 free:
 	kfree_skb(skb);
+	kfree(rx_buf);
 }
 
 static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 {
-	struct sk_buff *skb = (struct sk_buff *) urb->context;
+	struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+	struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+	struct sk_buff *skb = rx_buf->skb;
 	struct sk_buff *nskb;
-	struct hif_device_usb *hif_dev =
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 	int ret;
 
 	if (!skb)
@@ -750,6 +751,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 	return;
 free:
 	kfree_skb(skb);
+	kfree(rx_buf);
 	urb->context = NULL;
 }
 
@@ -795,7 +797,7 @@ static int ath9k_hif_usb_alloc_tx_urbs(struct hif_device_usb *hif_dev)
 	init_usb_anchor(&hif_dev->mgmt_submitted);
 
 	for (i = 0; i < MAX_TX_URB_NUM; i++) {
-		tx_buf = kzalloc(sizeof(struct tx_buf), GFP_KERNEL);
+		tx_buf = kzalloc(sizeof(*tx_buf), GFP_KERNEL);
 		if (!tx_buf)
 			goto err;
 
@@ -832,8 +834,9 @@ static void ath9k_hif_usb_dealloc_rx_urbs(struct hif_device_usb *hif_dev)
 
 static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 {
-	struct urb *urb = NULL;
+	struct rx_buf *rx_buf = NULL;
 	struct sk_buff *skb = NULL;
+	struct urb *urb = NULL;
 	int i, ret;
 
 	init_usb_anchor(&hif_dev->rx_submitted);
@@ -841,6 +844,12 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 
 	for (i = 0; i < MAX_RX_URB_NUM; i++) {
 
+		rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+		if (!rx_buf) {
+			ret = -ENOMEM;
+			goto err_rxb;
+		}
+
 		/* Allocate URB */
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (urb == NULL) {
@@ -855,11 +864,14 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 			goto err_skb;
 		}
 
+		rx_buf->hif_dev = hif_dev;
+		rx_buf->skb = skb;
+
 		usb_fill_bulk_urb(urb, hif_dev->udev,
 				  usb_rcvbulkpipe(hif_dev->udev,
 						  USB_WLAN_RX_PIPE),
 				  skb->data, MAX_RX_BUF_SIZE,
-				  ath9k_hif_usb_rx_cb, skb);
+				  ath9k_hif_usb_rx_cb, rx_buf);
 
 		/* Anchor URB */
 		usb_anchor_urb(urb, &hif_dev->rx_submitted);
@@ -885,6 +897,8 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 err_skb:
 	usb_free_urb(urb);
 err_urb:
+	kfree(rx_buf);
+err_rxb:
 	ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
 	return ret;
 }
@@ -896,14 +910,21 @@ static void ath9k_hif_usb_dealloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 
 static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 {
-	struct urb *urb = NULL;
+	struct rx_buf *rx_buf = NULL;
 	struct sk_buff *skb = NULL;
+	struct urb *urb = NULL;
 	int i, ret;
 
 	init_usb_anchor(&hif_dev->reg_in_submitted);
 
 	for (i = 0; i < MAX_REG_IN_URB_NUM; i++) {
 
+		rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+		if (!rx_buf) {
+			ret = -ENOMEM;
+			goto err_rxb;
+		}
+
 		/* Allocate URB */
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (urb == NULL) {
@@ -918,11 +939,14 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 			goto err_skb;
 		}
 
+		rx_buf->hif_dev = hif_dev;
+		rx_buf->skb = skb;
+
 		usb_fill_int_urb(urb, hif_dev->udev,
 				  usb_rcvintpipe(hif_dev->udev,
 						  USB_REG_IN_PIPE),
 				  skb->data, MAX_REG_IN_BUF_SIZE,
-				  ath9k_hif_usb_reg_in_cb, skb, 1);
+				  ath9k_hif_usb_reg_in_cb, rx_buf, 1);
 
 		/* Anchor URB */
 		usb_anchor_urb(urb, &hif_dev->reg_in_submitted);
@@ -948,6 +972,8 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 err_skb:
 	usb_free_urb(urb);
 err_urb:
+	kfree(rx_buf);
+err_rxb:
 	ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
 	return ret;
 }
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
index a94e7e1c86e9..5985aa15ca93 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -86,6 +86,11 @@ struct tx_buf {
 	struct list_head list;
 };
 
+struct rx_buf {
+	struct sk_buff *skb;
+	struct hif_device_usb *hif_dev;
+};
+
 #define HIF_USB_TX_STOP  BIT(0)
 #define HIF_USB_TX_FLUSH BIT(1)
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 033/106] brcmfmac: fix wrong location to get firmware feature

[Sasha Levin]

From: Jaehoon Chung <jh80.chung@samsung.com>

[ Upstream commit c57673852062428cdeabdd6501ac8b8e4c302067 ]

sup_wpa feature is getting after setting feature_disable flag.
If firmware is supported sup_wpa feature,  it's always enabled
regardless of feature_disable flag.

Fixes: b8a64f0e96c2 ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK")
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200330052528.10503-1-jh80.chung@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 4c5a3995dc35..d7f41caa0b0b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -281,13 +281,14 @@ void brcmf_feat_attach(struct brcmf_pub *drvr)
 	if (!err)
 		ifp->drvr->feat_flags |= BIT(BRCMF_FEAT_SCAN_RANDOM_MAC);
 
+	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
+
 	if (drvr->settings->feature_disable) {
 		brcmf_dbg(INFO, "Features: 0x%02x, disable: 0x%02x\n",
 			  ifp->drvr->feat_flags,
 			  drvr->settings->feature_disable);
 		ifp->drvr->feat_flags &= ~drvr->settings->feature_disable;
 	}
-	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
 
 	brcmf_feat_firmware_overrides(drvr);
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 035/106] e1000: Distribute switch variables for initialization

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit a34c7f5156654ebaf7eaace102938be7ff7036cb ]

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

drivers/net/ethernet/intel/e1000/e1000_main.c: In function ‘e1000_xmit_frame’:
drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable]
 3143 |     unsigned int pull_size;
      |                  ^~~~~~~~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 2110d5f2da19..47b867c64b14 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -3144,8 +3144,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		if (skb->data_len && hdr_len == len) {
 			switch (hw->mac_type) {
+			case e1000_82544: {
 				unsigned int pull_size;
-			case e1000_82544:
+
 				/* Make sure we have room to chop off 4 bytes,
 				 * and that the end alignment will work out to
 				 * this hardware's requirements
@@ -3166,6 +3167,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				}
 				len = skb_headlen(skb);
 				break;
+			}
 			default:
 				/* do nothing */
 				break;
-- 
2.25.1

[PATCH AUTOSEL 4.19 043/106] netfilter: nft_nat: return EOPNOTSUPP if type or flags are not supported

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 0d7c83463fdf7841350f37960a7abadd3e650b41 ]

Instead of EINVAL which should be used for malformed netlink messages.

Fixes: eb31628e37a0 ("netfilter: nf_tables: Add support for IPv6 NAT")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_nat.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nft_nat.c b/net/netfilter/nft_nat.c
index c15807d10b91..3e82a7d0df2a 100644
--- a/net/netfilter/nft_nat.c
+++ b/net/netfilter/nft_nat.c
@@ -135,7 +135,7 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		priv->type = NF_NAT_MANIP_DST;
 		break;
 	default:
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	}
 
 	if (tb[NFTA_NAT_FAMILY] == NULL)
@@ -202,7 +202,7 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 	if (tb[NFTA_NAT_FLAGS]) {
 		priv->flags = ntohl(nla_get_be32(tb[NFTA_NAT_FLAGS]));
 		if (priv->flags & ~NF_NAT_RANGE_MASK)
-			return -EINVAL;
+			return -EOPNOTSUPP;
 	}
 
 	return nf_ct_netns_get(ctx->net, family);
-- 
2.25.1

[PATCH AUTOSEL 4.19 044/106] selftests/bpf: Fix memory leak in extract_build_id()

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 9f56bb531a809ecaa7f0ddca61d2cf3adc1cb81a ]

getline() allocates string, which has to be freed.

Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-7-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_progs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index 89f8b0dae7ef..bad3505d66e0 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -1118,6 +1118,7 @@ static int extract_build_id(char *build_id, size_t size)
 		len = size;
 	memcpy(build_id, line, len);
 	build_id[len] = '\0';
+	free(line);
 	return 0;
 err:
 	fclose(fp);
-- 
2.25.1

[PATCH AUTOSEL 4.19 045/106] net: bcmgenet: set Rx mode before starting netif

[Sasha Levin]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit 72f96347628e73dbb61b307f18dd19293cc6792a ]

This commit explicitly calls the bcmgenet_set_rx_mode() function when
the network interface is started. This function is normally called by
ndo_set_rx_mode when the flags are changed, but apparently not when
the driver is suspended and resumed.

This change ensures that address filtering or promiscuous mode are
properly restored by the driver after the MAC may have been reset.

Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 047fc0cf0263..40e8ef984b62 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -72,6 +72,9 @@
 #define GENET_RDMA_REG_OFF	(priv->hw_params->rdma_offset + \
 				TOTAL_DESC * DMA_DESC_SIZE)
 
+/* Forward declarations */
+static void bcmgenet_set_rx_mode(struct net_device *dev);
+
 static inline void bcmgenet_writel(u32 value, void __iomem *offset)
 {
 	/* MIPS chips strapped for BE will automagically configure the
@@ -2859,6 +2862,7 @@ static void bcmgenet_netif_start(struct net_device *dev)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 
 	/* Start the network engine */
+	bcmgenet_set_rx_mode(dev);
 	bcmgenet_enable_rx_napi(priv);
 
 	umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, true);
-- 
2.25.1

[PATCH AUTOSEL 4.19 051/106] net: lpc-enet: fix error return code in lpc_mii_init()

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 88ec7cb22ddde725ed4ce15991f0bd9dd817fd85 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/nxp/lpc_eth.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 41d30f55c946..6bd6c261f2ba 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -845,7 +845,8 @@ static int lpc_mii_init(struct netdata_local *pldat)
 	if (mdiobus_register(pldat->mii_bus))
 		goto err_out_unregister_bus;
 
-	if (lpc_mii_probe(pldat->ndev) != 0)
+	err = lpc_mii_probe(pldat->ndev);
+	if (err)
 		goto err_out_unregister_bus;
 
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 4.19 053/106] net: allwinner: Fix use correct return type for ndo_start_xmit()

[Sasha Levin]

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit 09f6c44aaae0f1bdb8b983d7762676d5018c53bc ]

The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix
the ndo function to use the correct type. And emac_start_xmit() can
leak one skb if 'channel' == 3.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/allwinner/sun4i-emac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index 3143de45baaa..c458b81ba63a 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -433,7 +433,7 @@ static void emac_timeout(struct net_device *dev)
 /* Hardware start transmission.
  * Send a packet to media from the upper layer.
  */
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct emac_board_info *db = netdev_priv(dev);
 	unsigned long channel;
@@ -441,7 +441,7 @@ static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	channel = db->tx_fifo_stat & 3;
 	if (channel == 3)
-		return 1;
+		return NETDEV_TX_BUSY;
 
 	channel = (channel == 1 ? 1 : 0);
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 055/106] ath9k_htc: Silence undersized packet warnings

[Sasha Levin]

From: Masashi Honma <masashi.honma@gmail.com>

[ Upstream commit 450edd2805982d14ed79733a82927d2857b27cac ]

Some devices like TP-Link TL-WN722N produces this kind of messages
frequently.

kernel: ath: phy0: Short RX data len, dropping (dlen: 4)

This warning is useful for developers to recognize that the device
(Wi-Fi dongle or USB hub etc) is noisy but not for general users. So
this patch make this warning to debug message.

Reported-By: Denis <pro.denis@protonmail.com>
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207539
Fixes: cd486e627e67 ("ath9k_htc: Discard undersized packets")
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200504214443.4485-1-masashi.honma@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index b5d7ef4da17f..f19393e584dc 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -999,9 +999,9 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	 * which are not PHY_ERROR (short radar pulses have a length of 3)
 	 */
 	if (unlikely(!rs_datalen || (rs_datalen < 10 && !is_phyerr))) {
-		ath_warn(common,
-			 "Short RX data len, dropping (dlen: %d)\n",
-			 rs_datalen);
+		ath_dbg(common, ANY,
+			"Short RX data len, dropping (dlen: %d)\n",
+			rs_datalen);
 		goto rx_next;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 068/106] ath10k: Remove msdu from idr when management pkt send fails

[Sasha Levin]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit c730c477176ad4af86d9aae4d360a7ad840b073a ]

Currently when the sending of any management pkt
via wmi command fails, the packet is being unmapped
freed in the error handling. But the idr entry added,
which is used to track these packet is not getting removed.

Hence, during unload, in wmi cleanup, all the entries
in IDR are removed and the corresponding buffer is
attempted to be freed. This can cause a situation where
one packet is attempted to be freed twice.

Fix this error by rmeoving the msdu from the idr
list when the sending of a management packet over
wmi fails.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1588667015-25490-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c     |  3 +++
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 10 ++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 15 +++++++++++++++
 3 files changed, 28 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index a09d7a07e90a..81af403c19c2 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3852,6 +3852,9 @@ void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
 			if (ret) {
 				ath10k_warn(ar, "failed to transmit management frame by ref via WMI: %d\n",
 					    ret);
+				/* remove this msdu from idr tracking */
+				ath10k_wmi_cleanup_mgmt_tx_send(ar, skb);
+
 				dma_unmap_single(ar->dev, paddr, skb->len,
 						 DMA_TO_DEVICE);
 				ieee80211_free_txskb(ar->hw, skb);
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 7fd63bbf8e24..b6cd33fa79f8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -139,6 +139,7 @@ struct wmi_ops {
 	struct sk_buff *(*gen_mgmt_tx_send)(struct ath10k *ar,
 					    struct sk_buff *skb,
 					    dma_addr_t paddr);
+	int (*cleanup_mgmt_tx_send)(struct ath10k *ar, struct sk_buff *msdu);
 	struct sk_buff *(*gen_dbglog_cfg)(struct ath10k *ar, u64 module_enable,
 					  u32 log_level);
 	struct sk_buff *(*gen_pktlog_enable)(struct ath10k *ar, u32 filter);
@@ -431,6 +432,15 @@ ath10k_wmi_get_txbf_conf_scheme(struct ath10k *ar)
 	return ar->wmi.ops->get_txbf_conf_scheme(ar);
 }
 
+static inline int
+ath10k_wmi_cleanup_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu)
+{
+	if (!ar->wmi.ops->cleanup_mgmt_tx_send)
+		return -EOPNOTSUPP;
+
+	return ar->wmi.ops->cleanup_mgmt_tx_send(ar, msdu);
+}
+
 static inline int
 ath10k_wmi_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
 			dma_addr_t paddr)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 248decb494c2..7f435fa29f75 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2638,6 +2638,18 @@ ath10k_wmi_tlv_op_gen_request_stats(struct ath10k *ar, u32 stats_mask)
 	return skb;
 }
 
+static int
+ath10k_wmi_tlv_op_cleanup_mgmt_tx_send(struct ath10k *ar,
+				       struct sk_buff *msdu)
+{
+	struct ath10k_skb_cb *cb = ATH10K_SKB_CB(msdu);
+	struct ath10k_wmi *wmi = &ar->wmi;
+
+	idr_remove(&wmi->mgmt_pending_tx, cb->msdu_id);
+
+	return 0;
+}
+
 static int
 ath10k_wmi_mgmt_tx_alloc_msdu_id(struct ath10k *ar, struct sk_buff *skb,
 				 dma_addr_t paddr)
@@ -2710,6 +2722,8 @@ ath10k_wmi_tlv_op_gen_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
 	if (desc_id < 0)
 		goto err_free_skb;
 
+	cb->msdu_id = desc_id;
+
 	ptr = (void *)skb->data;
 	tlv = ptr;
 	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_MGMT_TX_CMD);
@@ -3949,6 +3963,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_force_fw_hang = ath10k_wmi_tlv_op_gen_force_fw_hang,
 	/* .gen_mgmt_tx = not implemented; HTT is used */
 	.gen_mgmt_tx_send = ath10k_wmi_tlv_op_gen_mgmt_tx_send,
+	.cleanup_mgmt_tx_send = ath10k_wmi_tlv_op_cleanup_mgmt_tx_send,
 	.gen_dbglog_cfg = ath10k_wmi_tlv_op_gen_dbglog_cfg,
 	.gen_pktlog_enable = ath10k_wmi_tlv_op_gen_pktlog_enable,
 	.gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable,
-- 
2.25.1

[PATCH AUTOSEL 4.19 069/106] wcn36xx: Fix error handling path in 'wcn36xx_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit a86308fc534edeceaf64670c691e17485436a4f4 ]

In case of error, 'qcom_wcnss_open_channel()' must be undone by a call to
'rpmsg_destroy_ept()', as already done in the remove function.

Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200507043619.200051-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 79998a3ddb7a..ad051f34e65b 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1341,7 +1341,7 @@ static int wcn36xx_probe(struct platform_device *pdev)
 	if (addr && ret != ETH_ALEN) {
 		wcn36xx_err("invalid local-mac-address\n");
 		ret = -EINVAL;
-		goto out_wq;
+		goto out_destroy_ept;
 	} else if (addr) {
 		wcn36xx_info("mac address: %pM\n", addr);
 		SET_IEEE80211_PERM_ADDR(wcn->hw, addr);
@@ -1349,7 +1349,7 @@ static int wcn36xx_probe(struct platform_device *pdev)
 
 	ret = wcn36xx_platform_get_resources(wcn, pdev);
 	if (ret)
-		goto out_wq;
+		goto out_destroy_ept;
 
 	wcn36xx_init_ieee80211(wcn);
 	ret = ieee80211_register_hw(wcn->hw);
@@ -1361,6 +1361,8 @@ static int wcn36xx_probe(struct platform_device *pdev)
 out_unmap:
 	iounmap(wcn->ccu_base);
 	iounmap(wcn->dxe_base);
+out_destroy_ept:
+	rpmsg_destroy_ept(wcn->smd_channel);
 out_wq:
 	ieee80211_free_hw(hw);
 out_err:
-- 
2.25.1

[PATCH AUTOSEL 4.19 070/106] net: qed*: Reduce RX and TX default ring count when running inside kdump kernel

[Sasha Levin]

From: Bhupesh Sharma <bhsharma@redhat.com>

[ Upstream commit 73e030977f7884dbe1be0018bab517e8d02760f8 ]

Normally kdump kernel(s) run under severe memory constraint with the
basic idea being to save the crashdump vmcore reliably when the primary
kernel panics/hangs.

Currently the qed* ethernet driver ends up consuming a lot of memory in
the kdump kernel, leading to kdump kernel panic when one tries to save
the vmcore via ssh/nfs (thus utilizing the services of the underlying
qed* network interfaces).

An example OOM message log seen in the kdump kernel can be seen here
[1], with crashkernel size reservation of 512M.

Using tools like memstrack (see [2]), we can track the modules taking up
the bulk of memory in the kdump kernel and organize the memory usage
output as per 'highest allocator first'. An example log for the OOM case
indicates that the qed* modules end up allocating approximately 216M
memory, which is a large part of the total crashkernel size:

 dracut-pre-pivot[676]: ======== Report format module_summary: ========
 dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages)
 dracut-pre-pivot[676]: Module qede using 65.3MB (1045 pages), peak allocation 65.3MB (1045 pages)

This patch reduces the default RX and TX ring count from 1024 to 64
when running inside kdump kernel, which leads to a significant memory
saving.

An example log with the patch applied shows the reduced memory
allocation in the kdump kernel:
 dracut-pre-pivot[674]: ======== Report format module_summary: ========
 dracut-pre-pivot[674]: Module qed using 141.8MB (2268 pages), peak allocation 141.8MB (2268 pages)
 <..snip..>
[dracut-pre-pivot[674]: Module qede using 4.8MB (76 pages), peak allocation 4.9MB (78 pages)

Tested crashdump vmcore save via ssh/nfs protocol using underlying qed*
network interface after applying this patch.

[1] OOM log:
------------

 kworker/0:6: page allocation failure: order:6,
 mode:0x60c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null)
 kworker/0:6 cpuset=/ mems_allowed=0
 CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 4.18.0-109.el8.aarch64 #1
 Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL025
 01/18/2019
 Workqueue: events work_for_cpu_fn
 Call trace:
  dump_backtrace+0x0/0x188
  show_stack+0x24/0x30
  dump_stack+0x90/0xb4
  warn_alloc+0xf4/0x178
  __alloc_pages_nodemask+0xcac/0xd58
  alloc_pages_current+0x8c/0xf8
  kmalloc_order_trace+0x38/0x108
  qed_iov_alloc+0x40/0x248 [qed]
  qed_resc_alloc+0x224/0x518 [qed]
  qed_slowpath_start+0x254/0x928 [qed]
   __qede_probe+0xf8/0x5e0 [qede]
  qede_probe+0x68/0xd8 [qede]
  local_pci_probe+0x44/0xa8
  work_for_cpu_fn+0x20/0x30
  process_one_work+0x1ac/0x3e8
  worker_thread+0x44/0x448
  kthread+0x130/0x138
  ret_from_fork+0x10/0x18
  Cannot start slowpath
  qede: probe of 0000:05:00.1 failed with error -12

[2]. Memstrack tool: https://github.com/ryncsn/memstrack

Cc: kexec@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Cc: Manish Chopra <manishc@marvell.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede.h      |  2 ++
 drivers/net/ethernet/qlogic/qede/qede_main.c | 11 +++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index dc3be8a4acf4..2bdc410d1144 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -550,12 +550,14 @@ int qede_add_tc_flower_fltr(struct qede_dev *edev, __be16 proto,
 #define RX_RING_SIZE		((u16)BIT(RX_RING_SIZE_POW))
 #define NUM_RX_BDS_MAX		(RX_RING_SIZE - 1)
 #define NUM_RX_BDS_MIN		128
+#define NUM_RX_BDS_KDUMP_MIN	63
 #define NUM_RX_BDS_DEF		((u16)BIT(10) - 1)
 
 #define TX_RING_SIZE_POW	13
 #define TX_RING_SIZE		((u16)BIT(TX_RING_SIZE_POW))
 #define NUM_TX_BDS_MAX		(TX_RING_SIZE - 1)
 #define NUM_TX_BDS_MIN		128
+#define NUM_TX_BDS_KDUMP_MIN	63
 #define NUM_TX_BDS_DEF		NUM_TX_BDS_MAX
 
 #define QEDE_MIN_PKT_LEN		64
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 0d8e39ffbcd1..1aabb2e7a38b 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -29,6 +29,7 @@
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#include <linux/crash_dump.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/version.h>
@@ -730,8 +731,14 @@ static struct qede_dev *qede_alloc_etherdev(struct qed_dev *cdev,
 	edev->dp_module = dp_module;
 	edev->dp_level = dp_level;
 	edev->ops = qed_ops;
-	edev->q_num_rx_buffers = NUM_RX_BDS_DEF;
-	edev->q_num_tx_buffers = NUM_TX_BDS_DEF;
+
+	if (is_kdump_kernel()) {
+		edev->q_num_rx_buffers = NUM_RX_BDS_KDUMP_MIN;
+		edev->q_num_tx_buffers = NUM_TX_BDS_KDUMP_MIN;
+	} else {
+		edev->q_num_rx_buffers = NUM_RX_BDS_DEF;
+		edev->q_num_tx_buffers = NUM_TX_BDS_DEF;
+	}
 
 	DP_INFO(edev, "Allocated netdev with %d tx queues and %d rx queues\n",
 		info->num_queues, info->num_queues);
-- 
2.25.1

[PATCH AUTOSEL 4.19 071/106] mt76: avoid rx reorder buffer overflow

[Sasha Levin]

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit 7c4f744d6703757be959f521a7a441bf34745d99 ]

Enlarge slot to support 11ax 256 BA (256 MPDUs in an AMPDU)

Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/agg-rx.c | 8 ++++----
 drivers/net/wireless/mediatek/mt76/mt76.h   | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/agg-rx.c b/drivers/net/wireless/mediatek/mt76/agg-rx.c
index 73c8b2805c97..d44d57e6eb27 100644
--- a/drivers/net/wireless/mediatek/mt76/agg-rx.c
+++ b/drivers/net/wireless/mediatek/mt76/agg-rx.c
@@ -154,8 +154,8 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 	struct ieee80211_sta *sta;
 	struct mt76_rx_tid *tid;
 	bool sn_less;
-	u16 seqno, head, size;
-	u8 ackp, idx;
+	u16 seqno, head, size, idx;
+	u8 ackp;
 
 	__skb_queue_tail(frames, skb);
 
@@ -240,7 +240,7 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 }
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tidno,
-		       u16 ssn, u8 size)
+		       u16 ssn, u16 size)
 {
 	struct mt76_rx_tid *tid;
 
@@ -264,7 +264,7 @@ EXPORT_SYMBOL_GPL(mt76_rx_aggr_start);
 
 static void mt76_rx_aggr_shutdown(struct mt76_dev *dev, struct mt76_rx_tid *tid)
 {
-	u8 size = tid->size;
+	u16 size = tid->size;
 	int i;
 
 	cancel_delayed_work(&tid->reorder_work);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 2eab35879163..7b1667ec619e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -193,8 +193,8 @@ struct mt76_rx_tid {
 	struct delayed_work reorder_work;
 
 	u16 head;
-	u8 size;
-	u8 nframes;
+	u16 size;
+	u16 nframes;
 
 	u8 started:1, stopped:1, timer_pending:1;
 
@@ -537,7 +537,7 @@ int mt76_get_survey(struct ieee80211_hw *hw, int idx,
 void mt76_set_stream_caps(struct mt76_dev *dev, bool vht);
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid,
-		       u16 ssn, u8 size);
+		       u16 ssn, u16 size);
 void mt76_rx_aggr_stop(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid);
 
 void mt76_wcid_key_setup(struct mt76_dev *dev, struct mt76_wcid *wcid,
-- 
2.25.1

[PATCH AUTOSEL 4.19 073/106] net: dsa: mt7530: set CPU port to fallback mode

[Sasha Levin]

From: DENG Qingfang <dqfext@gmail.com>

[ Upstream commit 38152ea37d8bdaffa22603e0a5b5b86cfa8714c9 ]

Currently, setting a bridge's self PVID to other value and deleting
the default VID 1 renders untagged ports of that VLAN unable to talk to
the CPU port:

	bridge vlan add dev br0 vid 2 pvid untagged self
	bridge vlan del dev br0 vid 1 self
	bridge vlan add dev sw0p0 vid 2 pvid untagged
	bridge vlan del dev sw0p0 vid 1
	# br0 cannot send untagged frames out of sw0p0 anymore

That is because the CPU port is set to security mode and its PVID is
still 1, and untagged frames are dropped due to VLAN member violation.

Set the CPU port to fallback mode so untagged frames can pass through.

Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 11 ++++++++---
 drivers/net/dsa/mt7530.h |  6 ++++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8b39a211ecb6..616afd81536a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -860,10 +860,15 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
 		   PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
 
 	/* Trapped into security mode allows packet forwarding through VLAN
-	 * table lookup.
+	 * table lookup. CPU port is set to fallback mode to let untagged
+	 * frames pass through.
 	 */
-	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
-		   MT7530_PORT_SECURITY_MODE);
+	if (dsa_is_cpu_port(ds, port))
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_FALLBACK_MODE);
+	else
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_SECURITY_MODE);
 
 	/* Set the port as a user port which is to be able to recognize VID
 	 * from incoming packets before fetching entry within the VLAN table.
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 403adbe5a4b4..101d309ee445 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -148,6 +148,12 @@ enum mt7530_port_mode {
 	/* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */
 	MT7530_PORT_MATRIX_MODE = PORT_VLAN(0),
 
+	/* Fallback Mode: Forward received frames with ingress ports that do
+	 * not belong to the VLAN member. Frames whose VID is not listed on
+	 * the VLAN table are forwarded by the PCR_MATRIX members.
+	 */
+	MT7530_PORT_FALLBACK_MODE = PORT_VLAN(1),
+
 	/* Security Mode: Discard any frame due to ingress membership
 	 * violation or VID missed on the VLAN table.
 	 */
-- 
2.25.1

[PATCH AUTOSEL 4.19 074/106] veth: Adjust hard_start offset on redirect XDP frames

[Sasha Levin]

From: Jesper Dangaard Brouer <brouer@redhat.com>

[ Upstream commit 5c8572251fabc5bb49fd623c064e95a9daf6a3e3 ]

When native XDP redirect into a veth device, the frame arrives in the
xdp_frame structure. It is then processed in veth_xdp_rcv_one(),
which can run a new XDP bpf_prog on the packet. Doing so requires
converting xdp_frame to xdp_buff, but the tricky part is that
xdp_frame memory area is located in the top (data_hard_start) memory
area that xdp_buff will point into.

The current code tried to protect the xdp_frame area, by assigning
xdp_buff.data_hard_start past this memory. This results in 32 bytes
less headroom to expand into via BPF-helper bpf_xdp_adjust_head().

This protect step is actually not needed, because BPF-helper
bpf_xdp_adjust_head() already reserve this area, and don't allow
BPF-prog to expand into it. Thus, it is safe to point data_hard_start
directly at xdp_frame memory area.

Fixes: 9fc8d518d9d5 ("veth: Handle xdp_frames in xdp napi ring")
Reported-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158945338331.97035.5923525383710752178.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/veth.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 41a00cd76955..2abbad1abaf2 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -377,13 +377,15 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 					unsigned int *xdp_xmit)
 {
 	void *hard_start = frame->data - frame->headroom;
-	void *head = hard_start - sizeof(struct xdp_frame);
 	int len = frame->len, delta = 0;
 	struct xdp_frame orig_frame;
 	struct bpf_prog *xdp_prog;
 	unsigned int headroom;
 	struct sk_buff *skb;
 
+	/* bpf_xdp_adjust_head() assures BPF cannot access xdp_frame area */
+	hard_start -= sizeof(struct xdp_frame);
+
 	rcu_read_lock();
 	xdp_prog = rcu_dereference(rq->xdp_prog);
 	if (likely(xdp_prog)) {
@@ -405,7 +407,6 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 			break;
 		case XDP_TX:
 			orig_frame = *frame;
-			xdp.data_hard_start = head;
 			xdp.rxq->mem = frame->mem;
 			if (unlikely(veth_xdp_tx(rq->dev, &xdp) < 0)) {
 				trace_xdp_exception(rq->dev, xdp_prog, act);
@@ -417,7 +418,6 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 			goto xdp_xmit;
 		case XDP_REDIRECT:
 			orig_frame = *frame;
-			xdp.data_hard_start = head;
 			xdp.rxq->mem = frame->mem;
 			if (xdp_do_redirect(rq->dev, &xdp, xdp_prog)) {
 				frame = &orig_frame;
@@ -437,7 +437,7 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 	rcu_read_unlock();
 
 	headroom = sizeof(struct xdp_frame) + frame->headroom - delta;
-	skb = veth_build_skb(head, headroom, len, 0);
+	skb = veth_build_skb(hard_start, headroom, len, 0);
 	if (!skb) {
 		xdp_return_frame(frame);
 		goto err;
-- 
2.25.1

[PATCH AUTOSEL 4.19 075/106] net/mlx5e: IPoIB, Drop multicast packets that this interface sent

[Sasha Levin]

From: Erez Shitrit <erezsh@mellanox.com>

[ Upstream commit 8b46d424a743ddfef8056d5167f13ee7ebd1dcad ]

After enabled loopback packets for IPoIB, we need to drop these packets
that this HCA has replicated and came back to the same interface that
sent them.

Fixes: 4c6c615e3f30 ("net/mlx5e: IPoIB, Add PKEY child interface nic profile")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index 044687a1f27c..9d86e49a7f44 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -1314,6 +1314,7 @@ int mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget)
 
 #ifdef CONFIG_MLX5_CORE_IPOIB
 
+#define MLX5_IB_GRH_SGID_OFFSET 8
 #define MLX5_IB_GRH_DGID_OFFSET 24
 #define MLX5_GID_SIZE           16
 
@@ -1327,6 +1328,7 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 	struct net_device *netdev;
 	struct mlx5e_priv *priv;
 	char *pseudo_header;
+	u32 flags_rqpn;
 	u32 qpn;
 	u8 *dgid;
 	u8 g;
@@ -1347,7 +1349,8 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 	priv = mlx5i_epriv(netdev);
 	tstamp = &priv->tstamp;
 
-	g = (be32_to_cpu(cqe->flags_rqpn) >> 28) & 3;
+	flags_rqpn = be32_to_cpu(cqe->flags_rqpn);
+	g = (flags_rqpn >> 28) & 3;
 	dgid = skb->data + MLX5_IB_GRH_DGID_OFFSET;
 	if ((!g) || dgid[0] != 0xff)
 		skb->pkt_type = PACKET_HOST;
@@ -1356,9 +1359,15 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 	else
 		skb->pkt_type = PACKET_MULTICAST;
 
-	/* TODO: IB/ipoib: Allow mcast packets from other VFs
-	 * 68996a6e760e5c74654723eeb57bf65628ae87f4
+	/* Drop packets that this interface sent, ie multicast packets
+	 * that the HCA has replicated.
 	 */
+	if (g && (qpn == (flags_rqpn & 0xffffff)) &&
+	    (memcmp(netdev->dev_addr + 4, skb->data + MLX5_IB_GRH_SGID_OFFSET,
+		    MLX5_GID_SIZE) == 0)) {
+		skb->dev = NULL;
+		return;
+	}
 
 	skb_pull(skb, MLX5_IB_GRH_BYTES);
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 076/106] rtlwifi: Fix a double free in _rtl_usb_tx_urb_setup()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit beb12813bc75d4a23de43b85ad1c7cb28d27631e ]

Seven years ago we tried to fix a leak but actually introduced a double
free instead.  It was an understandable mistake because the code was a
bit confusing and the free was done in the wrong place.  The "skb"
pointer is freed in both _rtl_usb_tx_urb_setup() and _rtl_usb_transmit().
The free belongs _rtl_usb_transmit() instead of _rtl_usb_tx_urb_setup()
and I've cleaned the code up a bit to hopefully make it more clear.

Fixes: 36ef0b473fbf ("rtlwifi: usb: add missing freeing of skbuff")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200513093951.GD347693@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/usb.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 1181b725f503..1893640555c1 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -910,10 +910,8 @@ static struct urb *_rtl_usb_tx_urb_setup(struct ieee80211_hw *hw,
 
 	WARN_ON(NULL == skb);
 	_urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!_urb) {
-		kfree_skb(skb);
+	if (!_urb)
 		return NULL;
-	}
 	_rtl_install_trx_info(rtlusb, skb, ep_num);
 	usb_fill_bulk_urb(_urb, rtlusb->udev, usb_sndbulkpipe(rtlusb->udev,
 			  ep_num), skb->data, skb->len, _rtl_tx_complete, skb);
@@ -927,7 +925,6 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb,
 	struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
 	u32 ep_num;
 	struct urb *_urb = NULL;
-	struct sk_buff *_skb = NULL;
 
 	WARN_ON(NULL == rtlusb->usb_tx_aggregate_hdl);
 	if (unlikely(IS_USB_STOP(rtlusb))) {
@@ -936,8 +933,7 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb,
 		return;
 	}
 	ep_num = rtlusb->ep_map.ep_mapping[qnum];
-	_skb = skb;
-	_urb = _rtl_usb_tx_urb_setup(hw, _skb, ep_num);
+	_urb = _rtl_usb_tx_urb_setup(hw, skb, ep_num);
 	if (unlikely(!_urb)) {
 		pr_err("Can't allocate urb. Drop skb!\n");
 		kfree_skb(skb);
-- 
2.25.1

[PATCH AUTOSEL 4.19 077/106] mwifiex: Fix memory corruption in dump_station

[Sasha Levin]

From: Pali Rohár <pali@kernel.org>

[ Upstream commit 3aa42bae9c4d1641aeb36f1a8585cd1d506cf471 ]

The mwifiex_cfg80211_dump_station() uses static variable for iterating
over a linked list of all associated stations (when the driver is in UAP
role). This has a race condition if .dump_station is called in parallel
for multiple interfaces. This corruption can be triggered by registering
multiple SSIDs and calling, in parallel for multiple interfaces
    iw dev <iface> station dump

[16750.719775] Unable to handle kernel paging request at virtual address dead000000000110
...
[16750.899173] Call trace:
[16750.901696]  mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex]
[16750.907824]  nl80211_dump_station+0xbc/0x278 [cfg80211]
[16750.913160]  netlink_dump+0xe8/0x320
[16750.916827]  netlink_recvmsg+0x1b4/0x338
[16750.920861]  ____sys_recvmsg+0x7c/0x2b0
[16750.924801]  ___sys_recvmsg+0x70/0x98
[16750.928564]  __sys_recvmsg+0x58/0xa0
[16750.932238]  __arm64_sys_recvmsg+0x28/0x30
[16750.936453]  el0_svc_common.constprop.3+0x90/0x158
[16750.941378]  do_el0_svc+0x74/0x90
[16750.944784]  el0_sync_handler+0x12c/0x1a8
[16750.948903]  el0_sync+0x114/0x140
[16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060)
[16750.958583] ---[ end trace c8ad181c2f4b8576 ]---

This patch drops the use of the static iterator, and instead every time
the function is called iterates to the idx-th position of the
linked-list.

It would be better to convert the code not to use linked list for
associated stations storage (since the chip has a limited number of
associated stations anyway - it could just be an array). Such a change
may be proposed in the future. In the meantime this patch can backported
into stable kernels in this simple form.

Fixes: 8baca1a34d4c ("mwifiex: dump station support in uap mode")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 7b74ef71bef1..650191db25cb 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -1468,7 +1468,8 @@ mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 			      int idx, u8 *mac, struct station_info *sinfo)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
-	static struct mwifiex_sta_node *node;
+	struct mwifiex_sta_node *node;
+	int i;
 
 	if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) &&
 	    priv->media_connected && idx == 0) {
@@ -1478,13 +1479,10 @@ mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 		mwifiex_send_cmd(priv, HOST_CMD_APCMD_STA_LIST,
 				 HostCmd_ACT_GEN_GET, 0, NULL, true);
 
-		if (node && (&node->list == &priv->sta_list)) {
-			node = NULL;
-			return -ENOENT;
-		}
-
-		node = list_prepare_entry(node, &priv->sta_list, list);
-		list_for_each_entry_continue(node, &priv->sta_list, list) {
+		i = 0;
+		list_for_each_entry(node, &priv->sta_list, list) {
+			if (i++ != idx)
+				continue;
 			ether_addr_copy(mac, node->mac_addr);
 			return mwifiex_dump_station_info(priv, node, sinfo);
 		}
-- 
2.25.1

[PATCH AUTOSEL 4.19 087/106] net: ethernet: fec: move GPR register offset and bit into DT

[Sasha Levin]

From: Fugang Duan <fugang.duan@nxp.com>

[ Upstream commit 8a448bf832af537d26aa557d183a16943dce4510 ]

The commit da722186f654 (net: fec: set GPR bit on suspend by DT
configuration) set the GPR reigster offset and bit in driver for
wake on lan feature.

But it introduces two issues here:
- one SOC has two instances, they have different bit
- different SOCs may have different offset and bit

So to support wake-on-lan feature on other i.MX platforms, it should
configure the GPR reigster offset and bit from DT.

So the patch is to improve the commit da722186f654 (net: fec: set GPR
bit on suspend by DT configuration) to support multiple ethernet
instances on i.MX series.

v2:
 * switch back to store the quirks bitmask in driver_data
v3:
 * suggested by Sascha Hauer, use a struct fec_devinfo for
   abstracting differences between different hardware variants,
   it can give more freedom to describe the differences.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 24 +++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 48c58f93b124..6702bc2dd92f 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -88,8 +88,6 @@ static void fec_enet_itr_coal_init(struct net_device *ndev);
 
 struct fec_devinfo {
 	u32 quirks;
-	u8 stop_gpr_reg;
-	u8 stop_gpr_bit;
 };
 
 static const struct fec_devinfo fec_imx25_info = {
@@ -112,8 +110,6 @@ static const struct fec_devinfo fec_imx6q_info = {
 		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
 		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
 		  FEC_QUIRK_HAS_RACC,
-	.stop_gpr_reg = 0x34,
-	.stop_gpr_bit = 27,
 };
 
 static const struct fec_devinfo fec_mvf600_info = {
@@ -3401,19 +3397,23 @@ static int fec_enet_get_irq_cnt(struct platform_device *pdev)
 }
 
 static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
-				   struct fec_devinfo *dev_info,
 				   struct device_node *np)
 {
 	struct device_node *gpr_np;
+	u32 out_val[3];
 	int ret = 0;
 
-	if (!dev_info)
-		return 0;
-
-	gpr_np = of_parse_phandle(np, "gpr", 0);
+	gpr_np = of_parse_phandle(np, "fsl,stop-mode", 0);
 	if (!gpr_np)
 		return 0;
 
+	ret = of_property_read_u32_array(np, "fsl,stop-mode", out_val,
+					 ARRAY_SIZE(out_val));
+	if (ret) {
+		dev_dbg(&fep->pdev->dev, "no stop mode property\n");
+		return ret;
+	}
+
 	fep->stop_gpr.gpr = syscon_node_to_regmap(gpr_np);
 	if (IS_ERR(fep->stop_gpr.gpr)) {
 		dev_err(&fep->pdev->dev, "could not find gpr regmap\n");
@@ -3422,8 +3422,8 @@ static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
 		goto out;
 	}
 
-	fep->stop_gpr.reg = dev_info->stop_gpr_reg;
-	fep->stop_gpr.bit = dev_info->stop_gpr_bit;
+	fep->stop_gpr.reg = out_val[1];
+	fep->stop_gpr.bit = out_val[2];
 
 out:
 	of_node_put(gpr_np);
@@ -3501,7 +3501,7 @@ fec_probe(struct platform_device *pdev)
 	if (of_get_property(np, "fsl,magic-packet", NULL))
 		fep->wol_flag |= FEC_WOL_HAS_MAGIC_PACKET;
 
-	ret = fec_enet_init_stop_mode(fep, dev_info, np);
+	ret = fec_enet_init_stop_mode(fep, np);
 	if (ret)
 		goto failed_stop_mode;
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 088/106] macvlan: Skip loopback packets in RX handler

[Sasha Levin]

From: Alexander Sverdlin <alexander.sverdlin@nokia.com>

[ Upstream commit 81f3dc9349ce0bf7b8447f147f45e70f0a5b36a6 ]

Ignore loopback-originatig packets soon enough and don't try to process L2
header where it doesn't exist. The very similar br_handle_frame() in bridge
code performs exactly the same check.

This is an example of such ICMPv6 packet:

skb len=96 headroom=40 headlen=96 tailroom=56
mac=(40,0) net=(40,40) trans=80
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0xae2e9a2f ip_summed=1 complete_sw=0 valid=0 level=0)
hash(0xc97ebd88 sw=1 l4=1) proto=0x86dd pkttype=5 iif=24
dev name=etha01.212 feat=0x0x0000000040005000
skb headroom: 00000000: 00 7c 86 52 84 88 ff ff 00 00 00 00 00 00 08 00
skb headroom: 00000010: 45 00 00 9e 5d 5c 40 00 40 11 33 33 00 00 00 01
skb headroom: 00000020: 02 40 43 80 00 00 86 dd
skb linear:   00000000: 60 09 88 bd 00 38 3a ff fe 80 00 00 00 00 00 00
skb linear:   00000010: 00 40 43 ff fe 80 00 00 ff 02 00 00 00 00 00 00
skb linear:   00000020: 00 00 00 00 00 00 00 01 86 00 61 00 40 00 00 2d
skb linear:   00000030: 00 00 00 00 00 00 00 00 03 04 40 e0 00 00 01 2c
skb linear:   00000040: 00 00 00 78 00 00 00 00 fd 5f 42 68 23 87 a8 81
skb linear:   00000050: 00 00 00 00 00 00 00 00 01 01 02 40 43 80 00 00
skb tailroom: 00000000: ...
skb tailroom: 00000010: ...
skb tailroom: 00000020: ...
skb tailroom: 00000030: ...

Call Trace, how it happens exactly:
 ...
 macvlan_handle_frame+0x321/0x425 [macvlan]
 ? macvlan_forward_source+0x110/0x110 [macvlan]
 __netif_receive_skb_core+0x545/0xda0
 ? enqueue_task_fair+0xe5/0x8e0
 ? __netif_receive_skb_one_core+0x36/0x70
 __netif_receive_skb_one_core+0x36/0x70
 process_backlog+0x97/0x140
 net_rx_action+0x1eb/0x350
 ? __hrtimer_run_queues+0x136/0x2e0
 __do_softirq+0xe3/0x383
 do_softirq_own_stack+0x2a/0x40
 </IRQ>
 do_softirq.part.4+0x4e/0x50
 netif_rx_ni+0x60/0xd0
 dev_loopback_xmit+0x83/0xf0
 ip6_finish_output2+0x575/0x590 [ipv6]
 ? ip6_cork_release.isra.1+0x64/0x90 [ipv6]
 ? __ip6_make_skb+0x38d/0x680 [ipv6]
 ? ip6_output+0x6c/0x140 [ipv6]
 ip6_output+0x6c/0x140 [ipv6]
 ip6_send_skb+0x1e/0x60 [ipv6]
 rawv6_sendmsg+0xc4b/0xe10 [ipv6]
 ? proc_put_long+0xd0/0xd0
 ? rw_copy_check_uvector+0x4e/0x110
 ? sock_sendmsg+0x36/0x40
 sock_sendmsg+0x36/0x40
 ___sys_sendmsg+0x2b6/0x2d0
 ? proc_dointvec+0x23/0x30
 ? addrconf_sysctl_forward+0x8d/0x250 [ipv6]
 ? dev_forward_change+0x130/0x130 [ipv6]
 ? _raw_spin_unlock+0x12/0x30
 ? proc_sys_call_handler.isra.14+0x9f/0x110
 ? __call_rcu+0x213/0x510
 ? get_max_files+0x10/0x10
 ? trace_hardirqs_on+0x2c/0xe0
 ? __sys_sendmsg+0x63/0xa0
 __sys_sendmsg+0x63/0xa0
 do_syscall_64+0x6c/0x1e0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macvlan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 225bfc808112..349123592af0 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -451,6 +451,10 @@ static rx_handler_result_t macvlan_handle_frame(struct sk_buff **pskb)
 	int ret;
 	rx_handler_result_t handle_res;
 
+	/* Packets from dev_loopback_xmit() do not have L2 header, bail out */
+	if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
+		return RX_HANDLER_PASS;
+
 	port = macvlan_port_get_rcu(skb->dev);
 	if (is_multicast_ether_addr(eth->h_dest)) {
 		unsigned int hash;
-- 
2.25.1

[PATCH AUTOSEL 4.19 097/106] ixgbe: fix signed-integer-overflow warning

[Sasha Levin]

From: Xie XiuQi <xiexiuqi@huawei.com>

[ Upstream commit 3b70683fc4d68f5d915d9dc7e5ba72c732c7315c ]

ubsan report this warning, fix it by adding a unsigned suffix.

UBSAN: signed-integer-overflow in
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:2246:26
65535 * 65537 cannot be represented in type 'int'
CPU: 21 PID: 7 Comm: kworker/u256:0 Not tainted 5.7.0-rc3-debug+ #39
Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 03/27/2020
Workqueue: ixgbe ixgbe_service_task [ixgbe]
Call trace:
 dump_backtrace+0x0/0x3f0
 show_stack+0x28/0x38
 dump_stack+0x154/0x1e4
 ubsan_epilogue+0x18/0x60
 handle_overflow+0xf8/0x148
 __ubsan_handle_mul_overflow+0x34/0x48
 ixgbe_fc_enable_generic+0x4d0/0x590 [ixgbe]
 ixgbe_service_task+0xc20/0x1f78 [ixgbe]
 process_one_work+0x8f0/0xf18
 worker_thread+0x430/0x6d0
 kthread+0x218/0x238
 ret_from_fork+0x10/0x18

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 0bd1294ba517..39c5e6fdb72c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -2243,7 +2243,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
 	}
 
 	/* Configure pause time (2 TCs per register) */
-	reg = hw->fc.pause_time * 0x00010001;
+	reg = hw->fc.pause_time * 0x00010001U;
 	for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
 		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 104/106] vxlan: Avoid infinite loop when suppressing NS messages with invalid options

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 8066e6b449e050675df48e7c4b16c29f00507ff0 ]

When proxy mode is enabled the vxlan device might reply to Neighbor
Solicitation (NS) messages on behalf of remote hosts.

In case the NS message includes the "Source link-layer address" option
[1], the vxlan device will use the specified address as the link-layer
destination address in its reply.

To avoid an infinite loop, break out of the options parsing loop when
encountering an option with length zero and disregard the NS message.

This is consistent with the IPv6 ndisc code and RFC 4886 which states
that "Nodes MUST silently discard an ND packet that contains an option
with length zero" [2].

[1] https://tools.ietf.org/html/rfc4861#section-4.3
[2] https://tools.ietf.org/html/rfc4861#section-4.6

Fixes: 4b29dba9c085 ("vxlan: fix nonfunctional neigh_reduce()")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 7ee0bad18466..09f0b53b2b77 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1611,6 +1611,10 @@ static struct sk_buff *vxlan_na_create(struct sk_buff *request,
 	ns_olen = request->len - skb_network_offset(request) -
 		sizeof(struct ipv6hdr) - sizeof(*ns);
 	for (i = 0; i < ns_olen-1; i += (ns->opt[i+1]<<3)) {
+		if (!ns->opt[i + 1]) {
+			kfree_skb(reply);
+			return NULL;
+		}
 		if (ns->opt[i] == ND_OPT_SOURCE_LL_ADDR) {
 			daddr = ns->opt + i + sizeof(struct nd_opt_hdr);
 			break;
-- 
2.25.1

[PATCH AUTOSEL 4.19 105/106] net_failover: fixed rollback in net_failover_open()

[Sasha Levin]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit e8224bfe77293494626f6eec1884fee7b87d0ced ]

found by smatch:
drivers/net/net_failover.c:65 net_failover_open() error:
 we previously assumed 'primary_dev' could be null (see line 43)

Fixes: cfc80d9a1163 ("net: Introduce net_failover driver")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/net_failover.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/net_failover.c b/drivers/net/net_failover.c
index beeb7eb76ca3..57273188b71e 100644
--- a/drivers/net/net_failover.c
+++ b/drivers/net/net_failover.c
@@ -62,7 +62,8 @@ static int net_failover_open(struct net_device *dev)
 	return 0;
 
 err_standby_open:
-	dev_close(primary_dev);
+	if (primary_dev)
+		dev_close(primary_dev);
 err_primary_open:
 	netif_tx_disable(dev);
 	return err;
-- 
2.25.1