[PATCH v3] brcmfmac: Transform compatible string for FW loading

[PATCH v3] brcmfmac: Transform compatible string for FW loading

[matthias.bgg]

From: Matthias Brugger <mbrugger@suse.com>

The driver relies on the compatible string from DT to determine which
FW configuration file it should load. The DTS spec allows for '/' as
part of the compatible string. We change this to '-' so that we will
still be able to load the config file, even when the compatible has a
'/'. This fixes explicitly the firmware loading for
"solidrun,cubox-i/q".

Signed-off-by: Matthias Brugger <mbrugger@suse.com>

---

Changes in v3:
- use len variable to store length of string (Hans de Goede)
- fix for loop to stop on first NULL-byte (Hans de Goede)

Changes in v2:
- use strscpy instead of strncpy (Hans de Goede)
- use strlen(tmp) + 1 for allocation (Hans de Goede, kernel test robot)

 .../wireless/broadcom/brcm80211/brcmfmac/of.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
index b886b56a5e5a..a7554265f95f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -17,7 +17,6 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
 {
 	struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
 	struct device_node *root, *np = dev->of_node;
-	struct property *prop;
 	int irq;
 	u32 irqf;
 	u32 val;
@@ -25,8 +24,22 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
 	/* Set board-type to the first string of the machine compatible prop */
 	root = of_find_node_by_path("/");
 	if (root) {
-		prop = of_find_property(root, "compatible", NULL);
-		settings->board_type = of_prop_next_string(prop, NULL);
+		int i, len;
+		char *board_type;
+		const char *tmp;
+
+		of_property_read_string_index(root, "compatible", 0, &tmp);
+
+		/* get rid of '/' in the compatible string to be able to find the FW */
+		len = strlen(tmp) + 1;
+		board_type = devm_kzalloc(dev, len, GFP_KERNEL);
+		strscpy(board_type, tmp, len);
+		for (i = 0; i < board_type[i]; i++) {
+			if (board_type[i] == '/')
+				board_type[i] = '-';
+		}
+		settings->board_type = board_type;
+
 		of_node_put(root);
 	}
 
-- 
2.27.0

Re: [PATCH v3] brcmfmac: Transform compatible string for FW loading

[Hans de Goede]

Hi,

On 7/1/20 1:22 PM, matthias.bgg@kernel.org wrote:
> From: Matthias Brugger <mbrugger@suse.com>
> 
> The driver relies on the compatible string from DT to determine which
> FW configuration file it should load. The DTS spec allows for '/' as
> part of the compatible string. We change this to '-' so that we will
> still be able to load the config file, even when the compatible has a
> '/'. This fixes explicitly the firmware loading for
> "solidrun,cubox-i/q".
> 
> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
> 
> ---
> 
> Changes in v3:
> - use len variable to store length of string (Hans de Goede)
> - fix for loop to stop on first NULL-byte (Hans de Goede)
> 
> Changes in v2:
> - use strscpy instead of strncpy (Hans de Goede)
> - use strlen(tmp) + 1 for allocation (Hans de Goede, kernel test robot)

v3 looks good to me:

Reviewed-by: Hans deGoede <hdegoede@redhat.com>

Regards,

Hans


> 
>   .../wireless/broadcom/brcm80211/brcmfmac/of.c | 19 ++++++++++++++++---
>   1 file changed, 16 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> index b886b56a5e5a..a7554265f95f 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> @@ -17,7 +17,6 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
>   {
>   	struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
>   	struct device_node *root, *np = dev->of_node;
> -	struct property *prop;
>   	int irq;
>   	u32 irqf;
>   	u32 val;
> @@ -25,8 +24,22 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
>   	/* Set board-type to the first string of the machine compatible prop */
>   	root = of_find_node_by_path("/");
>   	if (root) {
> -		prop = of_find_property(root, "compatible", NULL);
> -		settings->board_type = of_prop_next_string(prop, NULL);
> +		int i, len;
> +		char *board_type;
> +		const char *tmp;
> +
> +		of_property_read_string_index(root, "compatible", 0, &tmp);
> +
> +		/* get rid of '/' in the compatible string to be able to find the FW */
> +		len = strlen(tmp) + 1;
> +		board_type = devm_kzalloc(dev, len, GFP_KERNEL);
> +		strscpy(board_type, tmp, len);
> +		for (i = 0; i < board_type[i]; i++) {
> +			if (board_type[i] == '/')
> +				board_type[i] = '-';
> +		}
> +		settings->board_type = board_type;
> +
>   		of_node_put(root);
>   	}
>   
> 

Re: [PATCH v3] brcmfmac: Transform compatible string for FW loading

[Kalle Valo]

matthias.bgg@kernel.org wrote:

> From: Matthias Brugger <mbrugger@suse.com>
> 
> The driver relies on the compatible string from DT to determine which
> FW configuration file it should load. The DTS spec allows for '/' as
> part of the compatible string. We change this to '-' so that we will
> still be able to load the config file, even when the compatible has a
> '/'. This fixes explicitly the firmware loading for
> "solidrun,cubox-i/q".
> 
> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
> Reviewed-by: Hans deGoede <hdegoede@redhat.com>

Patch applied to wireless-drivers-next.git, thanks.

29e354ebeeec brcmfmac: Transform compatible string for FW loading

-- 
https://patchwork.kernel.org/patch/11636153/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches