* [PATCH bpf-next v6 0/2] bpf: cgroup skb improvements for bpf_prog_test_run @ 2020-08-03 9:05 Dmitry Yakunin 2020-08-03 9:05 ` [PATCH bpf-next v6 1/2] bpf: setup socket family and addresses in bpf_prog_test_run_skb Dmitry Yakunin ` (2 more replies) 0 siblings, 3 replies; 4+ messages in thread From: Dmitry Yakunin @ 2020-08-03 9:05 UTC (permalink / raw) To: alexei.starovoitov, daniel, netdev, bpf; +Cc: eric.dumazet, sdf This patchset contains some improvements for testing cgroup/skb programs through BPF_PROG_TEST_RUN command. v2: - fix build without CONFIG_CGROUP_BPF (kernel test robot <lkp@intel.com>) v3: - fix build without CONFIG_IPV6 (kernel test robot <lkp@intel.com>) v4: - remove cgroup storage related commits for future rework (Daniel Borkmann) v5: - check skb length before access to inet headers (Eric Dumazet) v6: - do not use pskb_may_pull() in skb length checking (Alexei Starovoitov) Dmitry Yakunin (2): bpf: setup socket family and addresses in bpf_prog_test_run_skb bpf: allow to specify ifindex for skb in bpf_prog_test_run_skb net/bpf/test_run.c | 39 ++++++++++++++++++++++-- tools/testing/selftests/bpf/prog_tests/skb_ctx.c | 5 +++ 2 files changed, 42 insertions(+), 2 deletions(-) -- 2.7.4 ^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH bpf-next v6 1/2] bpf: setup socket family and addresses in bpf_prog_test_run_skb 2020-08-03 9:05 [PATCH bpf-next v6 0/2] bpf: cgroup skb improvements for bpf_prog_test_run Dmitry Yakunin @ 2020-08-03 9:05 ` Dmitry Yakunin 2020-08-03 9:05 ` [PATCH bpf-next v6 2/2] bpf: allow to specify ifindex for skb " Dmitry Yakunin 2020-08-03 21:55 ` [PATCH bpf-next v6 0/2] bpf: cgroup skb improvements for bpf_prog_test_run Daniel Borkmann 2 siblings, 0 replies; 4+ messages in thread From: Dmitry Yakunin @ 2020-08-03 9:05 UTC (permalink / raw) To: alexei.starovoitov, daniel, netdev, bpf; +Cc: eric.dumazet, sdf Now it's impossible to test all branches of cgroup_skb bpf program which accesses skb->family and skb->{local,remote}_ip{4,6} fields because they are zeroed during socket allocation. This commit fills socket family and addresses from related fields in constructed skb. v2: - fix build without CONFIG_IPV6 (kernel test robot <lkp@intel.com>) v3: - check skb length before access to inet headers (Eric Dumazet) v4: - do not use pskb_may_pull() in skb length checking (Alexei Starovoitov) Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru> --- net/bpf/test_run.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c index b03c469..736a596 100644 --- a/net/bpf/test_run.c +++ b/net/bpf/test_run.c @@ -449,6 +449,27 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, skb->protocol = eth_type_trans(skb, current->nsproxy->net_ns->loopback_dev); skb_reset_network_header(skb); + switch (skb->protocol) { + case htons(ETH_P_IP): + sk->sk_family = AF_INET; + if (sizeof(struct iphdr) <= skb_headlen(skb)) { + sk->sk_rcv_saddr = ip_hdr(skb)->saddr; + sk->sk_daddr = ip_hdr(skb)->daddr; + } + break; +#if IS_ENABLED(CONFIG_IPV6) + case htons(ETH_P_IPV6): + sk->sk_family = AF_INET6; + if (sizeof(struct ipv6hdr) <= skb_headlen(skb)) { + sk->sk_v6_rcv_saddr = ipv6_hdr(skb)->saddr; + sk->sk_v6_daddr = ipv6_hdr(skb)->daddr; + } + break; +#endif + default: + break; + } + if (is_l2) __skb_push(skb, hh_len); if (is_direct_pkt_access) -- 2.7.4 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH bpf-next v6 2/2] bpf: allow to specify ifindex for skb in bpf_prog_test_run_skb 2020-08-03 9:05 [PATCH bpf-next v6 0/2] bpf: cgroup skb improvements for bpf_prog_test_run Dmitry Yakunin 2020-08-03 9:05 ` [PATCH bpf-next v6 1/2] bpf: setup socket family and addresses in bpf_prog_test_run_skb Dmitry Yakunin @ 2020-08-03 9:05 ` Dmitry Yakunin 2020-08-03 21:55 ` [PATCH bpf-next v6 0/2] bpf: cgroup skb improvements for bpf_prog_test_run Daniel Borkmann 2 siblings, 0 replies; 4+ messages in thread From: Dmitry Yakunin @ 2020-08-03 9:05 UTC (permalink / raw) To: alexei.starovoitov, daniel, netdev, bpf; +Cc: eric.dumazet, sdf Now skb->dev is unconditionally set to the loopback device in current net namespace. But if we want to test bpf program which contains code branch based on ifindex condition (eg filters out localhost packets) it is useful to allow specifying of ifindex from userspace. This patch adds such option through ctx_in (__sk_buff) parameter. Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru> --- net/bpf/test_run.c | 22 ++++++++++++++++++++-- tools/testing/selftests/bpf/prog_tests/skb_ctx.c | 5 +++++ 2 files changed, 25 insertions(+), 2 deletions(-) diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c index 736a596..99eb8c6 100644 --- a/net/bpf/test_run.c +++ b/net/bpf/test_run.c @@ -327,6 +327,12 @@ static int convert___skb_to_skb(struct sk_buff *skb, struct __sk_buff *__skb) /* priority is allowed */ if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority), + offsetof(struct __sk_buff, ifindex))) + return -EINVAL; + + /* ifindex is allowed */ + + if (!range_is_zero(__skb, offsetofend(struct __sk_buff, ifindex), offsetof(struct __sk_buff, cb))) return -EINVAL; @@ -381,6 +387,7 @@ static void convert_skb_to___skb(struct sk_buff *skb, struct __sk_buff *__skb) __skb->mark = skb->mark; __skb->priority = skb->priority; + __skb->ifindex = skb->dev->ifindex; __skb->tstamp = skb->tstamp; memcpy(__skb->cb, &cb->data, QDISC_CB_PRIV_LEN); __skb->wire_len = cb->pkt_len; @@ -391,6 +398,8 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, union bpf_attr __user *uattr) { bool is_l2 = false, is_direct_pkt_access = false; + struct net *net = current->nsproxy->net_ns; + struct net_device *dev = net->loopback_dev; u32 size = kattr->test.data_size_in; u32 repeat = kattr->test.repeat; struct __sk_buff *ctx = NULL; @@ -432,7 +441,7 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, kfree(ctx); return -ENOMEM; } - sock_net_set(sk, current->nsproxy->net_ns); + sock_net_set(sk, net); sock_init_data(NULL, sk); skb = build_skb(data, 0); @@ -446,7 +455,14 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN); __skb_put(skb, size); - skb->protocol = eth_type_trans(skb, current->nsproxy->net_ns->loopback_dev); + if (ctx && ctx->ifindex > 1) { + dev = dev_get_by_index(net, ctx->ifindex); + if (!dev) { + ret = -ENODEV; + goto out; + } + } + skb->protocol = eth_type_trans(skb, dev); skb_reset_network_header(skb); switch (skb->protocol) { @@ -502,6 +518,8 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, ret = bpf_ctx_finish(kattr, uattr, ctx, sizeof(struct __sk_buff)); out: + if (dev && dev != net->loopback_dev) + dev_put(dev); kfree_skb(skb); bpf_sk_storage_free(sk); kfree(sk); diff --git a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c index 7021b92..25de86a 100644 --- a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c +++ b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c @@ -11,6 +11,7 @@ void test_skb_ctx(void) .cb[3] = 4, .cb[4] = 5, .priority = 6, + .ifindex = 1, .tstamp = 7, .wire_len = 100, .gso_segs = 8, @@ -92,6 +93,10 @@ void test_skb_ctx(void) "ctx_out_priority", "skb->priority == %d, expected %d\n", skb.priority, 7); + CHECK_ATTR(skb.ifindex != 1, + "ctx_out_ifindex", + "skb->ifindex == %d, expected %d\n", + skb.ifindex, 1); CHECK_ATTR(skb.tstamp != 8, "ctx_out_tstamp", "skb->tstamp == %lld, expected %d\n", -- 2.7.4 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH bpf-next v6 0/2] bpf: cgroup skb improvements for bpf_prog_test_run 2020-08-03 9:05 [PATCH bpf-next v6 0/2] bpf: cgroup skb improvements for bpf_prog_test_run Dmitry Yakunin 2020-08-03 9:05 ` [PATCH bpf-next v6 1/2] bpf: setup socket family and addresses in bpf_prog_test_run_skb Dmitry Yakunin 2020-08-03 9:05 ` [PATCH bpf-next v6 2/2] bpf: allow to specify ifindex for skb " Dmitry Yakunin @ 2020-08-03 21:55 ` Daniel Borkmann 2 siblings, 0 replies; 4+ messages in thread From: Daniel Borkmann @ 2020-08-03 21:55 UTC (permalink / raw) To: Dmitry Yakunin, alexei.starovoitov, netdev, bpf; +Cc: eric.dumazet, sdf On 8/3/20 11:05 AM, Dmitry Yakunin wrote: > This patchset contains some improvements for testing cgroup/skb programs > through BPF_PROG_TEST_RUN command. > > v2: > - fix build without CONFIG_CGROUP_BPF (kernel test robot <lkp@intel.com>) > > v3: > - fix build without CONFIG_IPV6 (kernel test robot <lkp@intel.com>) > > v4: > - remove cgroup storage related commits for future rework (Daniel Borkmann) > > v5: > - check skb length before access to inet headers (Eric Dumazet) > > v6: > - do not use pskb_may_pull() in skb length checking (Alexei Starovoitov) > > Dmitry Yakunin (2): > bpf: setup socket family and addresses in bpf_prog_test_run_skb > bpf: allow to specify ifindex for skb in bpf_prog_test_run_skb > > net/bpf/test_run.c | 39 ++++++++++++++++++++++-- > tools/testing/selftests/bpf/prog_tests/skb_ctx.c | 5 +++ > 2 files changed, 42 insertions(+), 2 deletions(-) > Looks good, applied, thanks! ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-08-03 21:55 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-08-03 9:05 [PATCH bpf-next v6 0/2] bpf: cgroup skb improvements for bpf_prog_test_run Dmitry Yakunin 2020-08-03 9:05 ` [PATCH bpf-next v6 1/2] bpf: setup socket family and addresses in bpf_prog_test_run_skb Dmitry Yakunin 2020-08-03 9:05 ` [PATCH bpf-next v6 2/2] bpf: allow to specify ifindex for skb " Dmitry Yakunin 2020-08-03 21:55 ` [PATCH bpf-next v6 0/2] bpf: cgroup skb improvements for bpf_prog_test_run Daniel Borkmann
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).