netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <marek.behun@nic.cz>
To: Russell King <rmk+kernel@armlinux.org.uk>
Cc: "Andrew Lunn" <andrew@lunn.ch>,
	"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	"Baruch Siach" <baruch@tkos.co.il>,
	"Chris Healy" <cphealy@gmail.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	netdev@vger.kernel.org, "Marek Behún" <marek.behun@nic.cz>
Subject: [PATCH RFC russell-king 4/4] net: phylink: don't fail attaching phy on 1000base-x/2500base-x mode
Date: Tue, 11 Aug 2020 00:06:45 +0200	[thread overview]
Message-ID: <20200810220645.19326-5-marek.behun@nic.cz> (raw)
In-Reply-To: <20200810220645.19326-1-marek.behun@nic.cz>

Some SFPs may contain an internal PHY which may in some cases want to
connect with the host interface in 1000base-x/2500base-x mode.
Do not fail if such PHY is being attached in one of these PHY interface
modes.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
 drivers/net/phy/phylink.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 83e14176baba1..e20f6770b5c4b 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1015,9 +1015,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
 static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
 			      phy_interface_t interface)
 {
-	if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
-		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
-		     phy_interface_mode_is_8023z(interface))))
+	if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED))
 		return -EINVAL;
 
 	if (pl->phydev)
-- 
2.26.2


  parent reply	other threads:[~2020-08-10 22:06 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-10 22:06 [PATCH RFC russell-king 0/4] Support for RollBall 10G copper SFP modules Marek Behún
2020-08-10 22:06 ` [PATCH RFC russell-king 1/4] net: phy: add I2C mdio bus for RollBall compatible SFPs Marek Behún
2020-08-10 22:06 ` [PATCH RFC russell-king 2/4] net: phy: sfp: add support for multigig RollBall modules Marek Behún
2020-08-11 15:15   ` Russell King - ARM Linux admin
2020-08-12 13:33     ` Marek Behún
2020-08-12 14:33       ` Russell King - ARM Linux admin
2020-08-12 14:42         ` Marek Behún
2020-08-10 22:06 ` [PATCH RFC russell-king 3/4] net: phy: marvell10g: change MACTYPE according to phydev->interface Marek Behún
2020-08-11 15:21   ` Russell King - ARM Linux admin
2020-08-12 14:44     ` Marek Behún
2020-08-12 15:00       ` Russell King - ARM Linux admin
2020-08-12 15:37         ` Marek Behún
2020-08-12 15:48           ` Russell King - ARM Linux admin
2020-08-12 15:59             ` Marek Behún
2020-08-12 16:13             ` Marek Behún
2020-08-12 16:22               ` Russell King - ARM Linux admin
2020-08-12 16:28                 ` Marek Behún
2020-08-12 16:30                   ` Russell King - ARM Linux admin
2020-08-12 16:01           ` Russell King - ARM Linux admin
2020-08-12 16:15             ` Marek Behún
2020-08-12 15:44         ` Andrew Lunn
2020-08-12 15:54           ` Russell King - ARM Linux admin
2020-08-18 17:28             ` Marek Behún
2020-08-10 22:06 ` Marek Behún [this message]
2020-08-11 15:08 ` [PATCH RFC russell-king 0/4] Support for RollBall 10G copper SFP modules Russell King - ARM Linux admin
2020-08-12 12:31   ` Marek Behún
2020-08-12 12:31     ` Marek Behún
2020-08-12 14:20   ` Marek Behún
2020-08-17 13:49 ` Russell King - ARM Linux admin
2020-08-18 13:43   ` Marek Behún
2020-08-18 15:08     ` Russell King - ARM Linux admin
2020-08-18 15:30       ` Marek Behún
2020-08-18 15:36         ` Russell King - ARM Linux admin
2020-08-18 15:47           ` Marek Behún
2020-08-18 16:34             ` Russell King - ARM Linux admin
2020-08-19 15:49               ` Marek Behún
2020-08-19 15:54                 ` Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200810220645.19326-5-marek.behun@nic.cz \
    --to=marek.behun@nic.cz \
    --cc=andrew@lunn.ch \
    --cc=baruch@tkos.co.il \
    --cc=cphealy@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=netdev@vger.kernel.org \
    --cc=rmk+kernel@armlinux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).