* [PATCH 1/3] ARM: remove ebsa110 platform
2020-10-08 15:45 [PATCH 0/3] ARM, timers: ebsa110 cleanup Arnd Bergmann
@ 2020-10-08 15:45 ` Arnd Bergmann
2020-10-08 15:46 ` [PATCH 2/3] net: remove am79c961a driver Arnd Bergmann
` (2 subsequent siblings)
3 siblings, 0 replies; 11+ messages in thread
From: Arnd Bergmann @ 2020-10-08 15:45 UTC (permalink / raw)
To: linux-kernel
Cc: Arnd Bergmann, Russell King, Thomas Gleixner, Daniel Lezcano,
John Stultz, Stephen Boyd, Linus Walleij, David S. Miller,
Jakub Kicinski, netdev, linux-arm-kernel
Russell said that he is no longer using this machine, and it seems that
nobody else has in a long time, so it's time to say goodbye to it.
As this is the last platform using CONFIG_ARCH_USES_GETTIMEOFFSET,
there are some follow-up patches to remove that as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 8 -
arch/arm/Kconfig | 24 +-
arch/arm/Kconfig.debug | 6 +-
arch/arm/Makefile | 8 -
arch/arm/configs/ebsa110_defconfig | 74 ---
arch/arm/kernel/Makefile | 6 +-
arch/arm/mach-ebsa110/Makefile | 8 -
arch/arm/mach-ebsa110/Makefile.boot | 5 -
arch/arm/mach-ebsa110/core.c | 323 -------------
arch/arm/mach-ebsa110/core.h | 38 --
.../mach-ebsa110/include/mach/entry-macro.S | 33 --
arch/arm/mach-ebsa110/include/mach/hardware.h | 21 -
arch/arm/mach-ebsa110/include/mach/io.h | 89 ----
arch/arm/mach-ebsa110/include/mach/irqs.h | 17 -
arch/arm/mach-ebsa110/include/mach/memory.h | 22 -
.../mach-ebsa110/include/mach/uncompress.h | 41 --
arch/arm/mach-ebsa110/io.c | 440 ------------------
arch/arm/mach-ebsa110/leds.c | 71 ---
18 files changed, 6 insertions(+), 1228 deletions(-)
delete mode 100644 arch/arm/configs/ebsa110_defconfig
delete mode 100644 arch/arm/mach-ebsa110/Makefile
delete mode 100644 arch/arm/mach-ebsa110/Makefile.boot
delete mode 100644 arch/arm/mach-ebsa110/core.c
delete mode 100644 arch/arm/mach-ebsa110/core.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-ebsa110/include/mach/hardware.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/io.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/irqs.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/memory.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-ebsa110/io.c
delete mode 100644 arch/arm/mach-ebsa110/leds.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 0d0862b19ce5..6096b16cac12 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1809,14 +1809,6 @@ F: drivers/firmware/turris-mox-rwtm.c
F: drivers/gpio/gpio-moxtet.c
F: include/linux/moxtet.h
-ARM/EBSA110 MACHINE SUPPORT
-M: Russell King <linux@armlinux.org.uk>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-W: http://www.armlinux.org.uk/
-F: arch/arm/mach-ebsa110/
-F: drivers/net/ethernet/amd/am79c961a.*
-
ARM/ENERGY MICRO (SILICON LABS) EFM32 SUPPORT
M: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
R: Pengutronix Kernel Team <kernel@pengutronix.de>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e00d94b16658..a14266667bcd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -264,8 +264,7 @@ config PHYS_OFFSET
hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
- default 0x00000000 if ARCH_EBSA110 || \
- ARCH_FOOTBRIDGE || \
+ default 0x00000000 if ARCH_FOOTBRIDGE || \
ARCH_INTEGRATOR || \
ARCH_REALVIEW
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
@@ -341,20 +340,6 @@ config ARM_SINGLE_ARMV7M
select SPARSE_IRQ
select USE_OF
-config ARCH_EBSA110
- bool "EBSA-110"
- select ARCH_USES_GETTIMEOFFSET
- select CPU_SA110
- select ISA
- select NEED_MACH_IO_H
- select NEED_MACH_MEMORY_H
- select NO_IOPORT_MAP
- help
- This is an evaluation board for the StrongARM processor available
- from Digital. It has limited hardware on-board, including an
- Ethernet interface, two PCMCIA sockets, two serial ports and a
- parallel port.
-
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_SPARSEMEM_ENABLE
@@ -1372,7 +1357,6 @@ config ARCH_NR_GPIO
config HZ_FIXED
int
- default 200 if ARCH_EBSA110
default 128 if SOC_AT91RM9200
default 0
@@ -1588,9 +1572,7 @@ config FORCE_MAX_ZONEORDER
a value of 11 means that the largest free memory block is 2^10 pages.
config ALIGNMENT_TRAP
- bool
- depends on CPU_CP15_MMU
- default y if !ARCH_EBSA110
+ def_bool CPU_CP15_MMU
select HAVE_PROC_CPU if PROC_FS
help
ARM processors cannot fetch/store information which is not
@@ -1799,7 +1781,7 @@ config CMDLINE
string "Default kernel command string"
default ""
help
- On some architectures (EBSA110 and CATS), there is currently no way
+ On some architectures (e.g. CATS), there is currently no way
for the boot loader to pass arguments to the kernel. For these
architectures, you should supply some command-line options at build
time by entering them here. As a minimum, you should specify the
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 80000a66a4e3..48e13a7c694b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1610,7 +1610,7 @@ config DEBUG_UART_PL01X
# Compatibility options for 8250
config DEBUG_UART_8250
- def_bool ARCH_EBSA110 || ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+ def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
@@ -1713,7 +1713,6 @@ config DEBUG_UART_PHYS
default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
default 0xe8009000 if DEBUG_R7S9210_SCIF4
default 0xf0000000 if DEBUG_DIGICOLOR_UA0
- default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xf7fc9000 if DEBUG_BERLIN_UART
@@ -1760,7 +1759,6 @@ config DEBUG_UART_VIRT
default 0xc8821000 if DEBUG_RV1108_UART1
default 0xc8912000 if DEBUG_RV1108_UART0
default 0xe0010fe0 if ARCH_RPC
- default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf0100000 if DEBUG_DIGICOLOR_UA0
default 0xf01fb000 if DEBUG_NOMADIK_UART
@@ -1896,7 +1894,7 @@ config DEBUG_UART_8250_PALMCHIP
config DEBUG_UART_8250_FLOW_CONTROL
bool "Enable flow control for 8250 UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
- default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
+ default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
config DEBUG_UNCOMPRESS
bool "Enable decompressor debugging via DEBUG_LL output"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4e877354515f..ec150cf06729 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -169,7 +169,6 @@ machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
-machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EFM32) += efm32
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
@@ -241,13 +240,6 @@ plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_S3C24XX) += samsung
plat-$(CONFIG_PLAT_VERSATILE) += versatile
-ifeq ($(CONFIG_ARCH_EBSA110),y)
-# This is what happens if you forget the IOCS16 line.
-# PCMCIA cards stop working.
-CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
-export CFLAGS_3c589_cs.o
-endif
-
# The byte offset of the kernel image in RAM from the start of RAM.
TEXT_OFFSET := $(textofs-y)
diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig
deleted file mode 100644
index 731a22a55f4e..000000000000
--- a/arch/arm/configs/ebsa110_defconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_ARCH_EBSA110=y
-CONFIG_PCCARD=m
-CONFIG_I82365=m
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_FASTFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_FRAG=y
-CONFIG_IP6_NF_MATCH_OPTS=y
-CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_FW_LOADER=m
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_1284=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AM79C961A=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_PRINTER=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 89e5d864e923..09e67cb02b20 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,7 +17,7 @@ CFLAGS_REMOVE_return_address.o = -pg
# Object file lists.
obj-y := elf.o entry-common.o irq.o opcodes.o \
- process.o ptrace.o reboot.o \
+ process.o ptrace.o reboot.o io.o \
setup.o signal.o sigreturn_codes.o \
stacktrace.o sys_arm.o time.o traps.o
@@ -83,10 +83,6 @@ AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
obj-$(CONFIG_VDSO) += vdso.o
obj-$(CONFIG_EFI) += efi.o
-
-ifneq ($(CONFIG_ARCH_EBSA110),y)
- obj-y += io.o
-endif
obj-$(CONFIG_PARAVIRT) += paravirt.o
head-y := head$(MMUEXT).o
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
deleted file mode 100644
index 296541315d25..000000000000
--- a/arch/arm/mach-ebsa110/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := core.o io.o leds.o
diff --git a/arch/arm/mach-ebsa110/Makefile.boot b/arch/arm/mach-ebsa110/Makefile.boot
deleted file mode 100644
index e7e98937c71b..000000000000
--- a/arch/arm/mach-ebsa110/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000400
-initrd_phys-y := 0x00800000
-
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
deleted file mode 100644
index 5960e3dfd2bf..000000000000
--- a/arch/arm/mach-ebsa110/core.c
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-ebsa110/core.c
- *
- * Copyright (C) 1998-2001 Russell King
- *
- * Extra MM routines for the EBSA-110 architecture
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/serial_8250.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <asm/mach/time.h>
-
-#include "core.h"
-
-static void ebsa110_mask_irq(struct irq_data *d)
-{
- __raw_writeb(1 << d->irq, IRQ_MCLR);
-}
-
-static void ebsa110_unmask_irq(struct irq_data *d)
-{
- __raw_writeb(1 << d->irq, IRQ_MSET);
-}
-
-static struct irq_chip ebsa110_irq_chip = {
- .irq_ack = ebsa110_mask_irq,
- .irq_mask = ebsa110_mask_irq,
- .irq_unmask = ebsa110_unmask_irq,
-};
-
-static void __init ebsa110_init_irq(void)
-{
- unsigned long flags;
- unsigned int irq;
-
- local_irq_save(flags);
- __raw_writeb(0xff, IRQ_MCLR);
- __raw_writeb(0x55, IRQ_MSET);
- __raw_writeb(0x00, IRQ_MSET);
- if (__raw_readb(IRQ_MASK) != 0x55)
- while (1);
- __raw_writeb(0xff, IRQ_MCLR); /* clear all interrupt enables */
- local_irq_restore(flags);
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- irq_set_chip_and_handler(irq, &ebsa110_irq_chip,
- handle_level_irq);
- irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
- }
-}
-
-static struct map_desc ebsa110_io_desc[] __initdata = {
- /*
- * sparse external-decode ISAIO space
- */
- { /* IRQ_STAT/IRQ_MCLR */
- .virtual = (unsigned long)IRQ_STAT,
- .pfn = __phys_to_pfn(TRICK4_PHYS),
- .length = TRICK4_SIZE,
- .type = MT_DEVICE
- }, { /* IRQ_MASK/IRQ_MSET */
- .virtual = (unsigned long)IRQ_MASK,
- .pfn = __phys_to_pfn(TRICK3_PHYS),
- .length = TRICK3_SIZE,
- .type = MT_DEVICE
- }, { /* SOFT_BASE */
- .virtual = (unsigned long)SOFT_BASE,
- .pfn = __phys_to_pfn(TRICK1_PHYS),
- .length = TRICK1_SIZE,
- .type = MT_DEVICE
- }, { /* PIT_BASE */
- .virtual = (unsigned long)PIT_BASE,
- .pfn = __phys_to_pfn(TRICK0_PHYS),
- .length = TRICK0_SIZE,
- .type = MT_DEVICE
- },
-
- /*
- * self-decode ISAIO space
- */
- {
- .virtual = ISAIO_BASE,
- .pfn = __phys_to_pfn(ISAIO_PHYS),
- .length = ISAIO_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = ISAMEM_BASE,
- .pfn = __phys_to_pfn(ISAMEM_PHYS),
- .length = ISAMEM_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init ebsa110_map_io(void)
-{
- iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc));
-}
-
-static void __iomem *ebsa110_ioremap_caller(phys_addr_t cookie, size_t size,
- unsigned int flags, void *caller)
-{
- return (void __iomem *)cookie;
-}
-
-static void ebsa110_iounmap(volatile void __iomem *io_addr)
-{}
-
-static void __init ebsa110_init_early(void)
-{
- arch_ioremap_caller = ebsa110_ioremap_caller;
- arch_iounmap = ebsa110_iounmap;
-}
-
-#define PIT_CTRL (PIT_BASE + 0x0d)
-#define PIT_T2 (PIT_BASE + 0x09)
-#define PIT_T1 (PIT_BASE + 0x05)
-#define PIT_T0 (PIT_BASE + 0x01)
-
-/*
- * This is the rate at which your MCLK signal toggles (in Hz)
- * This was measured on a 10 digit frequency counter sampling
- * over 1 second.
- */
-#define MCLK 47894000
-
-/*
- * This is the rate at which the PIT timers get clocked
- */
-#define CLKBY7 (MCLK / 7)
-
-/*
- * This is the counter value. We tick at 200Hz on this platform.
- */
-#define COUNT ((CLKBY7 + (HZ / 2)) / HZ)
-
-/*
- * Get the time offset from the system PIT. Note that if we have missed an
- * interrupt, then the PIT counter will roll over (ie, be negative).
- * This actually works out to be convenient.
- */
-static u32 ebsa110_gettimeoffset(void)
-{
- unsigned long offset, count;
-
- __raw_writeb(0x40, PIT_CTRL);
- count = __raw_readb(PIT_T1);
- count |= __raw_readb(PIT_T1) << 8;
-
- /*
- * If count > COUNT, make the number negative.
- */
- if (count > COUNT)
- count |= 0xffff0000;
-
- offset = COUNT;
- offset -= count;
-
- /*
- * `offset' is in units of timer counts. Convert
- * offset to units of microseconds.
- */
- offset = offset * (1000000 / HZ) / COUNT;
-
- return offset * 1000;
-}
-
-static irqreturn_t
-ebsa110_timer_interrupt(int irq, void *dev_id)
-{
- u32 count;
-
- /* latch and read timer 1 */
- __raw_writeb(0x40, PIT_CTRL);
- count = __raw_readb(PIT_T1);
- count |= __raw_readb(PIT_T1) << 8;
-
- count += COUNT;
-
- __raw_writeb(count & 0xff, PIT_T1);
- __raw_writeb(count >> 8, PIT_T1);
-
- timer_tick();
-
- return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init ebsa110_timer_init(void)
-{
- int irq = IRQ_EBSA110_TIMER0;
-
- arch_gettimeoffset = ebsa110_gettimeoffset;
-
- /*
- * Timer 1, mode 2, LSB/MSB
- */
- __raw_writeb(0x70, PIT_CTRL);
- __raw_writeb(COUNT & 0xff, PIT_T1);
- __raw_writeb(COUNT >> 8, PIT_T1);
-
- if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
- "EBSA110 Timer Tick", NULL))
- pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .iobase = 0x3f8,
- .irq = 1,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- {
- .iobase = 0x2f8,
- .irq = 2,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct resource am79c961_resources[] = {
- {
- .start = 0x220,
- .end = 0x238,
- .flags = IORESOURCE_IO,
- }, {
- .start = IRQ_EBSA110_ETHERNET,
- .end = IRQ_EBSA110_ETHERNET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device am79c961_device = {
- .name = "am79c961",
- .id = -1,
- .num_resources = ARRAY_SIZE(am79c961_resources),
- .resource = am79c961_resources,
-};
-
-static struct platform_device *ebsa110_devices[] = {
- &serial_device,
- &am79c961_device,
-};
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static void ebsa110_idle(void)
-{
- const char *irq_stat = (char *)0xff000000;
-
- /* disable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
- /* wait for an interrupt to occur */
- while (!*irq_stat);
-
- /* enable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-static int __init ebsa110_init(void)
-{
- arm_pm_idle = ebsa110_idle;
- return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
-}
-
-arch_initcall(ebsa110_init);
-
-static void ebsa110_restart(enum reboot_mode mode, const char *cmd)
-{
- soft_restart(0x80000000);
-}
-
-MACHINE_START(EBSA110, "EBSA110")
- /* Maintainer: Russell King */
- .atag_offset = 0x400,
- .reserve_lp0 = 1,
- .reserve_lp2 = 1,
- .map_io = ebsa110_map_io,
- .init_early = ebsa110_init_early,
- .init_irq = ebsa110_init_irq,
- .init_time = ebsa110_timer_init,
- .restart = ebsa110_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h
deleted file mode 100644
index 47acc610b6b4..000000000000
--- a/arch/arm/mach-ebsa110/core.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 1996-2000 Russell King.
- *
- * This file contains the core hardware definitions of the EBSA-110.
- */
-#ifndef CORE_H
-#define CORE_H
-
-/* Physical addresses/sizes */
-#define ISAMEM_PHYS 0xe0000000
-#define ISAMEM_SIZE 0x10000000
-
-#define ISAIO_PHYS 0xf0000000
-#define ISAIO_SIZE PGDIR_SIZE
-
-#define TRICK0_PHYS 0xf2000000
-#define TRICK0_SIZE PGDIR_SIZE
-#define TRICK1_PHYS 0xf2400000
-#define TRICK1_SIZE PGDIR_SIZE
-#define TRICK2_PHYS 0xf2800000
-#define TRICK3_PHYS 0xf2c00000
-#define TRICK3_SIZE PGDIR_SIZE
-#define TRICK4_PHYS 0xf3000000
-#define TRICK4_SIZE PGDIR_SIZE
-#define TRICK5_PHYS 0xf3400000
-#define TRICK6_PHYS 0xf3800000
-#define TRICK7_PHYS 0xf3c00000
-
-/* Virtual addresses */
-#define PIT_BASE IOMEM(0xfc000000) /* trick 0 */
-#define SOFT_BASE IOMEM(0xfd000000) /* trick 1 */
-#define IRQ_MASK IOMEM(0xfe000000) /* trick 3 - read */
-#define IRQ_MSET IOMEM(0xfe000000) /* trick 3 - write */
-#define IRQ_STAT IOMEM(0xff000000) /* trick 4 - read */
-#define IRQ_MCLR IOMEM(0xff000000) /* trick 4 - write */
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
deleted file mode 100644
index 14b110de78a9..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for ebsa110 platform.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-
-#define IRQ_STAT 0xff000000 /* read */
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #IRQ_STAT
- .endm
-
- .macro get_irqnr_and_base, irqnr, stat, base, tmp
- ldrb \stat, [\base] @ get interrupts
- mov \irqnr, #0
- tst \stat, #15
- addeq \irqnr, \irqnr, #4
- moveq \stat, \stat, lsr #4
- tst \stat, #3
- addeq \irqnr, \irqnr, #2
- moveq \stat, \stat, lsr #2
- tst \stat, #1
- addeq \irqnr, \irqnr, #1
- moveq \stat, \stat, lsr #1
- tst \stat, #1 @ bit 0 should be set
- .endm
-
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
deleted file mode 100644
index 81f6967683f6..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- *
- * Copyright (C) 1996-2000 Russell King.
- *
- * This file contains the hardware definitions of the EBSA-110.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define ISAMEM_BASE 0xe0000000
-#define ISAIO_BASE 0xf0000000
-
-/*
- * RAM definitions
- */
-#define UNCACHEABLE_ADDR 0xff000000 /* IRQ_STAT */
-
-#endif
-
diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
deleted file mode 100644
index ad170886c9aa..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/io.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/io.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * Modifications:
- * 06-Dec-1997 RMK Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-u8 __inb8(unsigned int port);
-void __outb8(u8 val, unsigned int port);
-
-u8 __inb16(unsigned int port);
-void __outb16(u8 val, unsigned int port);
-
-u16 __inw(unsigned int port);
-void __outw(u16 val, unsigned int port);
-
-u32 __inl(unsigned int port);
-void __outl(u32 val, unsigned int port);
-
-u8 __readb(const volatile void __iomem *addr);
-u16 __readw(const volatile void __iomem *addr);
-u32 __readl(const volatile void __iomem *addr);
-
-void __writeb(u8 val, volatile void __iomem *addr);
-void __writew(u16 val, volatile void __iomem *addr);
-void __writel(u32 val, volatile void __iomem *addr);
-
-/*
- * Argh, someone forgot the IOCS16 line. We therefore have to handle
- * the byte stearing by selecting the correct byte IO functions here.
- */
-#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
-#define inb(p) __inb16(p)
-#define outb(v,p) __outb16(v,p)
-#else
-#define inb(p) __inb8(p)
-#define outb(v,p) __outb8(v,p)
-#endif
-
-#define inw(p) __inw(p)
-#define outw(v,p) __outw(v,p)
-
-#define inl(p) __inl(p)
-#define outl(v,p) __outl(v,p)
-
-#define readb(b) __readb(b)
-#define readw(b) __readw(b)
-#define readl(b) __readl(b)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define writeb(v,b) __writeb(v,b)
-#define writew(v,b) __writew(v,b)
-#define writel(v,b) __writel(v,b)
-
-#define insb insb
-extern void insb(unsigned int port, void *buf, int sz);
-#define insw insw
-extern void insw(unsigned int port, void *buf, int sz);
-#define insl insl
-extern void insl(unsigned int port, void *buf, int sz);
-
-#define outsb outsb
-extern void outsb(unsigned int port, const void *buf, int sz);
-#define outsw outsw
-extern void outsw(unsigned int port, const void *buf, int sz);
-#define outsl outsl
-extern void outsl(unsigned int port, const void *buf, int sz);
-
-/* can't support writesb atm */
-#define writesw writesw
-extern void writesw(volatile void __iomem *addr, const void *data, int wordlen);
-#define writesl writesl
-extern void writesl(volatile void __iomem *addr, const void *data, int longlen);
-
-/* can't support readsb atm */
-#define readsw readsw
-extern void readsw(const volatile void __iomem *addr, void *data, int wordlen);
-
-#define readsl readsl
-extern void readsl(const volatile void __iomem *addr, void *data, int longlen);
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h
deleted file mode 100644
index 29a8671fe849..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/irqs.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/irqs.h
- *
- * Copyright (C) 1996 Russell King
- */
-
-#define NR_IRQS 8
-
-#define IRQ_EBSA110_PRINTER 0
-#define IRQ_EBSA110_COM1 1
-#define IRQ_EBSA110_COM2 2
-#define IRQ_EBSA110_ETHERNET 3
-#define IRQ_EBSA110_TIMER0 4
-#define IRQ_EBSA110_TIMER1 5
-#define IRQ_EBSA110_PCMCIA 6
-#define IRQ_EBSA110_IMMEDIATE 7
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
deleted file mode 100644
index f025f405de50..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/memory.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * Changelog:
- * 20-Oct-1996 RMK Created
- * 31-Dec-1997 RMK Fixed definitions to reduce warnings
- * 21-Mar-1999 RMK Renamed to memory.h
- * RMK Moved TASK_SIZE and PAGE_OFFSET here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Cache flushing area - SRAM
- */
-#define FLUSH_BASE_PHYS 0x40000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
deleted file mode 100644
index 3ec12efe98a6..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/uncompress.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/uncompress.h
- *
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#include <linux/serial_reg.h>
-
-#define SERIAL_BASE ((unsigned char *)0xf0000be0)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while (!(v & UART_LSR_THRE));
-
- base[UART_TX << 2] = c;
-}
-
-static inline void flush(void)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
- (UART_LSR_TEMT|UART_LSR_THRE));
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
deleted file mode 100644
index 3c44dd3596ea..000000000000
--- a/arch/arm/mach-ebsa110/io.c
+++ /dev/null
@@ -1,440 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-ebsa110/isamem.c
- *
- * Copyright (C) 2001 Russell King
- *
- * Perform "ISA" memory and IO accesses. The EBSA110 has some "peculiarities"
- * in the way it handles accesses to odd IO ports on 16-bit devices. These
- * devices have their D0-D15 lines connected to the processors D0-D15 lines.
- * Since they expect all byte IO operations to be performed on D0-D7, and the
- * StrongARM expects to transfer the byte to these odd addresses on D8-D15,
- * we must use a trick to get the required behaviour.
- *
- * The trick employed here is to use long word stores to odd address -1. The
- * glue logic picks this up as a "trick" access, and asserts the LSB of the
- * peripherals address bus, thereby accessing the odd IO port. Meanwhile, the
- * StrongARM transfers its data on D0-D7 as expected.
- *
- * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller
- * wiring was screwed in such a way that it had limited memory space access.
- * Luckily, the work-around for this is not too horrible. See
- * __isamem_convert_addr for the details.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-
-static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr)
-{
- u32 ret, a = (u32 __force) addr;
-
- /*
- * The PCMCIA controller is wired up as follows:
- * +---------+---------+---------+---------+---------+---------+
- * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1 | | |
- * | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 |
- * +---------+---------+---------+---------+---------+---------+
- * CPU | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1 | | |
- * | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x |
- * +---------+---------+---------+---------+---------+---------+
- *
- * This means that we can access PCMCIA regions as follows:
- * 0x*10000 -> 0x*1ffff
- * 0x*70000 -> 0x*7ffff
- * 0x*90000 -> 0x*9ffff
- * 0x*f0000 -> 0x*fffff
- */
- ret = (a & 0xf803fe) << 1;
- ret |= (a & 0x03fc00) << 2;
-
- ret += 0xe8000000;
-
- if ((a & 0x20000) == (a & 0x40000) >> 1)
- return (void __iomem *)ret;
-
- BUG();
- return NULL;
-}
-
-/*
- * read[bwl] and write[bwl]
- */
-u8 __readb(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
- u32 ret;
-
- if ((unsigned long)addr & 1)
- ret = __raw_readl(a);
- else
- ret = __raw_readb(a);
- return ret;
-}
-
-u16 __readw(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- BUG();
-
- return __raw_readw(a);
-}
-
-u32 __readl(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
- u32 ret;
-
- if ((unsigned long)addr & 3)
- BUG();
-
- ret = __raw_readw(a);
- ret |= __raw_readw(a + 4) << 16;
- return ret;
-}
-
-EXPORT_SYMBOL(__readb);
-EXPORT_SYMBOL(__readw);
-EXPORT_SYMBOL(__readl);
-
-void readsw(const volatile void __iomem *addr, void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 1);
-
- __raw_readsw(a, data, len);
-}
-EXPORT_SYMBOL(readsw);
-
-void readsl(const volatile void __iomem *addr, void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 3);
-
- __raw_readsl(a, data, len);
-}
-EXPORT_SYMBOL(readsl);
-
-void __writeb(u8 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- __raw_writel(val, a);
- else
- __raw_writeb(val, a);
-}
-
-void __writew(u16 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- BUG();
-
- __raw_writew(val, a);
-}
-
-void __writel(u32 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 3)
- BUG();
-
- __raw_writew(val, a);
- __raw_writew(val >> 16, a + 4);
-}
-
-EXPORT_SYMBOL(__writeb);
-EXPORT_SYMBOL(__writew);
-EXPORT_SYMBOL(__writel);
-
-void writesw(volatile void __iomem *addr, const void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 1);
-
- __raw_writesw(a, data, len);
-}
-EXPORT_SYMBOL(writesw);
-
-void writesl(volatile void __iomem *addr, const void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 3);
-
- __raw_writesl(a, data, len);
-}
-EXPORT_SYMBOL(writesl);
-
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region IO region
- * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0
- * f0000e60 - f0000e64 398 - 399
- * f0000de0 - f0000dfc 378 - 37f lp0
- * f0000be0 - f0000bfc 2f8 - 2ff ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region IO region
- * f00014f1 a79 pnp write data
- * f00007c0 - f00007c1 3e0 - 3e1 pcmcia
- * f00004f1 279 pnp address
- * f0000440 - f000046c 220 - 236 eth0
- * f0000405 203 pnp read data
- */
-#define SUPERIO_PORT(p) \
- (((p) >> 3) == (0x3f8 >> 3) || \
- ((p) >> 3) == (0x2f8 >> 3) || \
- ((p) >> 3) == (0x378 >> 3))
-
-/*
- * We're addressing an 8 or 16-bit peripheral which tranfers
- * odd addresses on the low ISA byte lane.
- */
-u8 __inb8(unsigned int port)
-{
- u32 ret;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2));
- else {
- void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- /*
- * Shame nothing else does
- */
- if (port & 1)
- ret = __raw_readl(a);
- else
- ret = __raw_readb(a);
- }
- return ret;
-}
-
-/*
- * We're addressing a 16-bit peripheral which transfers odd
- * addresses on the high ISA byte lane.
- */
-u8 __inb16(unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else
- offset = (port & ~1) << 1 | (port & 1);
-
- return __raw_readb((void __iomem *)ISAIO_BASE + offset);
-}
-
-u16 __inw(unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else {
- offset = port << 1;
- BUG_ON(port & 1);
- }
- return __raw_readw((void __iomem *)ISAIO_BASE + offset);
-}
-
-/*
- * Fake a 32-bit read with two 16-bit reads. Needed for 3c589.
- */
-u32 __inl(unsigned int port)
-{
- void __iomem *a;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- return __raw_readw(a) | __raw_readw(a + 4) << 16;
-}
-
-EXPORT_SYMBOL(__inb8);
-EXPORT_SYMBOL(__inb16);
-EXPORT_SYMBOL(__inw);
-EXPORT_SYMBOL(__inl);
-
-void __outb8(u8 val, unsigned int port)
-{
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- __raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2));
- else {
- void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- /*
- * Shame nothing else does
- */
- if (port & 1)
- __raw_writel(val, a);
- else
- __raw_writeb(val, a);
- }
-}
-
-void __outb16(u8 val, unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else
- offset = (port & ~1) << 1 | (port & 1);
-
- __raw_writeb(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outw(u16 val, unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else {
- offset = port << 1;
- BUG_ON(port & 1);
- }
- __raw_writew(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outl(u32 val, unsigned int port)
-{
- BUG();
-}
-
-EXPORT_SYMBOL(__outb8);
-EXPORT_SYMBOL(__outb16);
-EXPORT_SYMBOL(__outw);
-EXPORT_SYMBOL(__outl);
-
-void outsb(unsigned int port, const void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_writesb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insb(unsigned int port, void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_readsb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsb);
-EXPORT_SYMBOL(insb);
-
-void outsw(unsigned int port, const void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insw(unsigned int port, void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsw);
-EXPORT_SYMBOL(insw);
-
-/*
- * We implement these as 16-bit insw/outsw, mainly for
- * 3c589 cards.
- */
-void outsl(unsigned int port, const void *from, int len)
-{
- u32 off = port << 1;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-void insl(unsigned int port, void *from, int len)
-{
- u32 off = port << 1;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-EXPORT_SYMBOL(outsl);
-EXPORT_SYMBOL(insl);
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
deleted file mode 100644
index fd1474b66d31..000000000000
--- a/arch/arm/mach-ebsa110/leds.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Driver for the LED found on the EBSA110 machine
- * Based on Versatile and RealView machine LED code
- *
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-#include "core.h"
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-static void ebsa110_led_set(struct led_classdev *cdev,
- enum led_brightness b)
-{
- u8 reg = __raw_readb(SOFT_BASE);
-
- if (b != LED_OFF)
- reg |= 0x80;
- else
- reg &= ~0x80;
-
- __raw_writeb(reg, SOFT_BASE);
-}
-
-static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
-{
- u8 reg = __raw_readb(SOFT_BASE);
-
- return (reg & 0x80) ? LED_FULL : LED_OFF;
-}
-
-static int __init ebsa110_leds_init(void)
-{
-
- struct led_classdev *cdev;
- int ret;
-
- if (!machine_is_ebsa110())
- return -ENODEV;
-
- cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
- if (!cdev)
- return -ENOMEM;
-
- cdev->name = "ebsa110:0";
- cdev->brightness_set = ebsa110_led_set;
- cdev->brightness_get = ebsa110_led_get;
- cdev->default_trigger = "heartbeat";
-
- ret = led_classdev_register(NULL, cdev);
- if (ret < 0) {
- kfree(cdev);
- return ret;
- }
-
- return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(ebsa110_leds_init);
-#endif
--
2.27.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 2/3] net: remove am79c961a driver
2020-10-08 15:45 [PATCH 0/3] ARM, timers: ebsa110 cleanup Arnd Bergmann
2020-10-08 15:45 ` [PATCH 1/3] ARM: remove ebsa110 platform Arnd Bergmann
@ 2020-10-08 15:46 ` Arnd Bergmann
2020-10-09 17:40 ` Jakub Kicinski
2020-10-08 15:46 ` [PATCH 3/3] timekeeping: remove arch_gettimeoffset Arnd Bergmann
2020-10-08 15:55 ` [PATCH 0/3] ARM, timers: ebsa110 cleanup Russell King - ARM Linux admin
3 siblings, 1 reply; 11+ messages in thread
From: Arnd Bergmann @ 2020-10-08 15:46 UTC (permalink / raw)
To: linux-kernel
Cc: Arnd Bergmann, Russell King, Thomas Gleixner, Daniel Lezcano,
John Stultz, Stephen Boyd, Linus Walleij, David S. Miller,
Jakub Kicinski, netdev, linux-arm-kernel
This driver was only used on the EBSA110 platform, which is now
getting removed, so the driver is no longer needed either.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/ethernet/amd/Kconfig | 10 +-
drivers/net/ethernet/amd/Makefile | 1 -
drivers/net/ethernet/amd/am79c961a.c | 763 ---------------------------
drivers/net/ethernet/amd/am79c961a.h | 143 -----
4 files changed, 1 insertion(+), 916 deletions(-)
delete mode 100644 drivers/net/ethernet/amd/am79c961a.c
delete mode 100644 drivers/net/ethernet/amd/am79c961a.h
diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig
index db7d956a9c9b..d0b0609bbe23 100644
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
@@ -8,7 +8,7 @@ config NET_VENDOR_AMD
default y
depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
- (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA || ARM64
+ ISA || EISA || PCMCIA || ARM64
help
If you have a network (Ethernet) chipset belonging to this class,
say Y.
@@ -75,14 +75,6 @@ config ARIADNE
To compile this driver as a module, choose M here: the module
will be called ariadne.
-config ARM_AM79C961A
- bool "ARM EBSA110 AM79C961A support"
- depends on ARM && ARCH_EBSA110
- select CRC32
- help
- If you wish to compile a kernel for the EBSA-110, then you should
- always answer Y to this.
-
config ATARILANCE
tristate "Atari LANCE support"
depends on ATARI
diff --git a/drivers/net/ethernet/amd/Makefile b/drivers/net/ethernet/amd/Makefile
index 45f86822a5f7..0d2f478b49a5 100644
--- a/drivers/net/ethernet/amd/Makefile
+++ b/drivers/net/ethernet/amd/Makefile
@@ -5,7 +5,6 @@
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
-obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
obj-$(CONFIG_DECLANCE) += declance.o
diff --git a/drivers/net/ethernet/amd/am79c961a.c b/drivers/net/ethernet/amd/am79c961a.c
deleted file mode 100644
index 1c53408f5d47..000000000000
--- a/drivers/net/ethernet/amd/am79c961a.c
+++ /dev/null
@@ -1,763 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/net/ethernet/amd/am79c961a.c
- *
- * by Russell King <rmk@arm.linux.org.uk> 1995-2001.
- *
- * Derived from various things including skeleton.c
- *
- * This is a special driver for the am79c961A Lance chip used in the
- * Intel (formally Digital Equipment Corp) EBSA110 platform. Please
- * note that this can not be built as a module (it doesn't make sense).
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/crc32.h>
-#include <linux/bitops.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define TX_BUFFERS 15
-#define RX_BUFFERS 25
-
-#include "am79c961a.h"
-
-static irqreturn_t
-am79c961_interrupt (int irq, void *dev_id);
-
-static unsigned int net_debug = NET_DEBUG;
-
-static const char version[] =
- "am79c961 ethernet driver (C) 1995-2001 Russell King v0.04\n";
-
-/* --------------------------------------------------------------------------- */
-
-#ifdef __arm__
-static void write_rreg(u_long base, u_int reg, u_int val)
-{
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "strh %0, [%2, #-4] @ NET_RDP"
- :
- : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
-}
-
-static inline unsigned short read_rreg(u_long base_addr, u_int reg)
-{
- unsigned short v;
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "ldrh %0, [%2, #-4] @ NET_RDP"
- : "=r" (v)
- : "r" (reg), "r" (ISAIO_BASE + 0x0464));
- return v;
-}
-
-static inline void write_ireg(u_long base, u_int reg, u_int val)
-{
- asm volatile(
- "strh %1, [%2] @ NET_RAP\n\t"
- "strh %0, [%2, #8] @ NET_IDP"
- :
- : "r" (val), "r" (reg), "r" (ISAIO_BASE + 0x0464));
-}
-
-static inline unsigned short read_ireg(u_long base_addr, u_int reg)
-{
- u_short v;
- asm volatile(
- "strh %1, [%2] @ NAT_RAP\n\t"
- "ldrh %0, [%2, #8] @ NET_IDP\n\t"
- : "=r" (v)
- : "r" (reg), "r" (ISAIO_BASE + 0x0464));
- return v;
-}
-
-#define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1))
-#define am_readword(dev,off) __raw_readw(ISAMEM_BASE + ((off) << 1))
-
-static void
-am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
-{
- offset = ISAMEM_BASE + (offset << 1);
- length = (length + 1) & ~1;
- if ((int)buf & 2) {
- asm volatile("strh %2, [%0], #4"
- : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
- buf += 2;
- length -= 2;
- }
- while (length > 8) {
- register unsigned int tmp asm("r2"), tmp2 asm("r3");
- asm volatile(
- "ldmia %0!, {%1, %2}"
- : "+r" (buf), "=&r" (tmp), "=&r" (tmp2));
- length -= 8;
- asm volatile(
- "strh %1, [%0], #4\n\t"
- "mov %1, %1, lsr #16\n\t"
- "strh %1, [%0], #4\n\t"
- "strh %2, [%0], #4\n\t"
- "mov %2, %2, lsr #16\n\t"
- "strh %2, [%0], #4"
- : "+r" (offset), "=&r" (tmp), "=&r" (tmp2));
- }
- while (length > 0) {
- asm volatile("strh %2, [%0], #4"
- : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
- buf += 2;
- length -= 2;
- }
-}
-
-static void
-am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
-{
- offset = ISAMEM_BASE + (offset << 1);
- length = (length + 1) & ~1;
- if ((int)buf & 2) {
- unsigned int tmp;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "strb %2, [%1], #1\n\t"
- "mov %2, %2, lsr #8\n\t"
- "strb %2, [%1], #1"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp): "0" (offset), "1" (buf));
- length -= 2;
- }
- while (length > 8) {
- register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "ldrh %4, [%0], #4\n\t"
- "ldrh %3, [%0], #4\n\t"
- "orr %2, %2, %4, lsl #16\n\t"
- "ldrh %4, [%0], #4\n\t"
- "orr %3, %3, %4, lsl #16\n\t"
- "stmia %1!, {%2, %3}"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2), "=r" (tmp3)
- : "0" (offset), "1" (buf));
- length -= 8;
- }
- while (length > 0) {
- unsigned int tmp;
- asm volatile(
- "ldrh %2, [%0], #4\n\t"
- "strb %2, [%1], #1\n\t"
- "mov %2, %2, lsr #8\n\t"
- "strb %2, [%1], #1"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp) : "0" (offset), "1" (buf));
- length -= 2;
- }
-}
-#else
-#error Not compatible
-#endif
-
-static int
-am79c961_ramtest(struct net_device *dev, unsigned int val)
-{
- unsigned char *buffer = kmalloc (65536, GFP_KERNEL);
- int i, error = 0, errorcount = 0;
-
- if (!buffer)
- return 0;
- memset (buffer, val, 65536);
- am_writebuffer(dev, 0, buffer, 65536);
- memset (buffer, val ^ 255, 65536);
- am_readbuffer(dev, 0, buffer, 65536);
- for (i = 0; i < 65536; i++) {
- if (buffer[i] != val && !error) {
- printk ("%s: buffer error (%02X %02X) %05X - ", dev->name, val, buffer[i], i);
- error = 1;
- errorcount ++;
- } else if (error && buffer[i] == val) {
- printk ("%05X\n", i);
- error = 0;
- }
- }
- if (error)
- printk ("10000\n");
- kfree (buffer);
- return errorcount;
-}
-
-static void am79c961_mc_hash(char *addr, u16 *hash)
-{
- int idx, bit;
- u32 crc;
-
- crc = ether_crc_le(ETH_ALEN, addr);
-
- idx = crc >> 30;
- bit = (crc >> 26) & 15;
-
- hash[idx] |= 1 << bit;
-}
-
-static unsigned int am79c961_get_rx_mode(struct net_device *dev, u16 *hash)
-{
- unsigned int mode = MODE_PORT_10BT;
-
- if (dev->flags & IFF_PROMISC) {
- mode |= MODE_PROMISC;
- memset(hash, 0xff, 4 * sizeof(*hash));
- } else if (dev->flags & IFF_ALLMULTI) {
- memset(hash, 0xff, 4 * sizeof(*hash));
- } else {
- struct netdev_hw_addr *ha;
-
- memset(hash, 0, 4 * sizeof(*hash));
-
- netdev_for_each_mc_addr(ha, dev)
- am79c961_mc_hash(ha->addr, hash);
- }
-
- return mode;
-}
-
-static void
-am79c961_init_for_open(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
- unsigned char *p;
- u_int hdr_addr, first_free_addr;
- u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
- int i;
-
- /*
- * Stop the chip.
- */
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
- write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
- write_ireg (dev->base_addr, 7, 0x0090); /* XMIT LED */
- write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */
-
- for (i = LADRL; i <= LADRH; i++)
- write_rreg (dev->base_addr, i, multi_hash[i - LADRL]);
-
- for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2)
- write_rreg (dev->base_addr, i, p[0] | (p[1] << 8));
-
- write_rreg (dev->base_addr, MODE, mode);
- write_rreg (dev->base_addr, POLLINT, 0);
- write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS);
- write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS);
-
- first_free_addr = RX_BUFFERS * 8 + TX_BUFFERS * 8 + 16;
- hdr_addr = 0;
-
- priv->rxhead = 0;
- priv->rxtail = 0;
- priv->rxhdr = hdr_addr;
-
- for (i = 0; i < RX_BUFFERS; i++) {
- priv->rxbuffer[i] = first_free_addr;
- am_writeword (dev, hdr_addr, first_free_addr);
- am_writeword (dev, hdr_addr + 2, RMD_OWN);
- am_writeword (dev, hdr_addr + 4, (-1600));
- am_writeword (dev, hdr_addr + 6, 0);
- first_free_addr += 1600;
- hdr_addr += 8;
- }
- priv->txhead = 0;
- priv->txtail = 0;
- priv->txhdr = hdr_addr;
- for (i = 0; i < TX_BUFFERS; i++) {
- priv->txbuffer[i] = first_free_addr;
- am_writeword (dev, hdr_addr, first_free_addr);
- am_writeword (dev, hdr_addr + 2, TMD_STP|TMD_ENP);
- am_writeword (dev, hdr_addr + 4, 0xf000);
- am_writeword (dev, hdr_addr + 6, 0);
- first_free_addr += 1600;
- hdr_addr += 8;
- }
-
- write_rreg (dev->base_addr, BASERXL, priv->rxhdr);
- write_rreg (dev->base_addr, BASERXH, 0);
- write_rreg (dev->base_addr, BASETXL, priv->txhdr);
- write_rreg (dev->base_addr, BASERXH, 0);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_IDONM|CSR3_BABLM|CSR3_DXSUFLO);
- write_rreg (dev->base_addr, CSR4, CSR4_APAD_XMIT|CSR4_MFCOM|CSR4_RCVCCOM|CSR4_TXSTRTM|CSR4_JABM);
- write_rreg (dev->base_addr, CSR0, CSR0_IENA|CSR0_STRT);
-}
-
-static void am79c961_timer(struct timer_list *t)
-{
- struct dev_priv *priv = from_timer(priv, t, timer);
- struct net_device *dev = priv->dev;
- unsigned int lnkstat, carrier;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST;
- spin_unlock_irqrestore(&priv->chip_lock, flags);
- carrier = netif_carrier_ok(dev);
-
- if (lnkstat && !carrier) {
- netif_carrier_on(dev);
- printk("%s: link up\n", dev->name);
- } else if (!lnkstat && carrier) {
- netif_carrier_off(dev);
- printk("%s: link down\n", dev->name);
- }
-
- mod_timer(&priv->timer, jiffies + msecs_to_jiffies(500));
-}
-
-/*
- * Open/initialize the board.
- */
-static int
-am79c961_open(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- int ret;
-
- ret = request_irq(dev->irq, am79c961_interrupt, 0, dev->name, dev);
- if (ret)
- return ret;
-
- am79c961_init_for_open(dev);
-
- netif_carrier_off(dev);
-
- priv->timer.expires = jiffies;
- add_timer(&priv->timer);
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-/*
- * The inverse routine to am79c961_open().
- */
-static int
-am79c961_close(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
-
- del_timer_sync(&priv->timer);
-
- netif_stop_queue(dev);
- netif_carrier_off(dev);
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- free_irq (dev->irq, dev);
-
- return 0;
-}
-
-/*
- * Set or clear promiscuous/multicast mode filter for this adapter.
- */
-static void am79c961_setmulticastlist (struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned long flags;
- u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
- int i, stopped;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
-
- stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
-
- if (!stopped) {
- /*
- * Put the chip into suspend mode
- */
- write_rreg(dev->base_addr, CTRL1, CTRL1_SPND);
-
- /*
- * Spin waiting for chip to report suspend mode
- */
- while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
- spin_unlock_irqrestore(&priv->chip_lock, flags);
- nop();
- spin_lock_irqsave(&priv->chip_lock, flags);
- }
- }
-
- /*
- * Update the multicast hash table
- */
- for (i = 0; i < ARRAY_SIZE(multi_hash); i++)
- write_rreg(dev->base_addr, i + LADRL, multi_hash[i]);
-
- /*
- * Write the mode register
- */
- write_rreg(dev->base_addr, MODE, mode);
-
- if (!stopped) {
- /*
- * Put the chip back into running mode
- */
- write_rreg(dev->base_addr, CTRL1, 0);
- }
-
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-}
-
-static void am79c961_timeout(struct net_device *dev, unsigned int txqueue)
-{
- printk(KERN_WARNING "%s: transmit timed out, network cable problem?\n",
- dev->name);
-
- /*
- * ought to do some setup of the tx side here
- */
-
- netif_wake_queue(dev);
-}
-
-/*
- * Transmit a packet
- */
-static netdev_tx_t
-am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
- unsigned int hdraddr, bufaddr;
- unsigned int head;
- unsigned long flags;
-
- head = priv->txhead;
- hdraddr = priv->txhdr + (head << 3);
- bufaddr = priv->txbuffer[head];
- head += 1;
- if (head >= TX_BUFFERS)
- head = 0;
-
- am_writebuffer (dev, bufaddr, skb->data, skb->len);
- am_writeword (dev, hdraddr + 4, -skb->len);
- am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
- priv->txhead = head;
-
- spin_lock_irqsave(&priv->chip_lock, flags);
- write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
- spin_unlock_irqrestore(&priv->chip_lock, flags);
-
- /*
- * If the next packet is owned by the ethernet device,
- * then the tx ring is full and we can't add another
- * packet.
- */
- if (am_readword(dev, priv->txhdr + (priv->txhead << 3) + 2) & TMD_OWN)
- netif_stop_queue(dev);
-
- dev_consume_skb_any(skb);
-
- return NETDEV_TX_OK;
-}
-
-/*
- * If we have a good packet(s), get it/them out of the buffers.
- */
-static void
-am79c961_rx(struct net_device *dev, struct dev_priv *priv)
-{
- do {
- struct sk_buff *skb;
- u_int hdraddr;
- u_int pktaddr;
- u_int status;
- int len;
-
- hdraddr = priv->rxhdr + (priv->rxtail << 3);
- pktaddr = priv->rxbuffer[priv->rxtail];
-
- status = am_readword (dev, hdraddr + 2);
- if (status & RMD_OWN) /* do we own it? */
- break;
-
- priv->rxtail ++;
- if (priv->rxtail >= RX_BUFFERS)
- priv->rxtail = 0;
-
- if ((status & (RMD_ERR|RMD_STP|RMD_ENP)) != (RMD_STP|RMD_ENP)) {
- am_writeword (dev, hdraddr + 2, RMD_OWN);
- dev->stats.rx_errors++;
- if (status & RMD_ERR) {
- if (status & RMD_FRAM)
- dev->stats.rx_frame_errors++;
- if (status & RMD_CRC)
- dev->stats.rx_crc_errors++;
- } else if (status & RMD_STP)
- dev->stats.rx_length_errors++;
- continue;
- }
-
- len = am_readword(dev, hdraddr + 6);
- skb = netdev_alloc_skb(dev, len + 2);
-
- if (skb) {
- skb_reserve(skb, 2);
-
- am_readbuffer(dev, pktaddr, skb_put(skb, len), len);
- am_writeword(dev, hdraddr + 2, RMD_OWN);
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->stats.rx_bytes += len;
- dev->stats.rx_packets++;
- } else {
- am_writeword (dev, hdraddr + 2, RMD_OWN);
- dev->stats.rx_dropped++;
- break;
- }
- } while (1);
-}
-
-/*
- * Update stats for the transmitted packet
- */
-static void
-am79c961_tx(struct net_device *dev, struct dev_priv *priv)
-{
- do {
- short len;
- u_int hdraddr;
- u_int status;
-
- hdraddr = priv->txhdr + (priv->txtail << 3);
- status = am_readword (dev, hdraddr + 2);
- if (status & TMD_OWN)
- break;
-
- priv->txtail ++;
- if (priv->txtail >= TX_BUFFERS)
- priv->txtail = 0;
-
- if (status & TMD_ERR) {
- u_int status2;
-
- dev->stats.tx_errors++;
-
- status2 = am_readword (dev, hdraddr + 6);
-
- /*
- * Clear the error byte
- */
- am_writeword (dev, hdraddr + 6, 0);
-
- if (status2 & TST_RTRY)
- dev->stats.collisions += 16;
- if (status2 & TST_LCOL)
- dev->stats.tx_window_errors++;
- if (status2 & TST_LCAR)
- dev->stats.tx_carrier_errors++;
- if (status2 & TST_UFLO)
- dev->stats.tx_fifo_errors++;
- continue;
- }
- dev->stats.tx_packets++;
- len = am_readword (dev, hdraddr + 4);
- dev->stats.tx_bytes += -len;
- } while (priv->txtail != priv->txhead);
-
- netif_wake_queue(dev);
-}
-
-static irqreturn_t
-am79c961_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct dev_priv *priv = netdev_priv(dev);
- u_int status, n = 100;
- int handled = 0;
-
- do {
- status = read_rreg(dev->base_addr, CSR0);
- write_rreg(dev->base_addr, CSR0, status &
- (CSR0_IENA|CSR0_TINT|CSR0_RINT|
- CSR0_MERR|CSR0_MISS|CSR0_CERR|CSR0_BABL));
-
- if (status & CSR0_RINT) {
- handled = 1;
- am79c961_rx(dev, priv);
- }
- if (status & CSR0_TINT) {
- handled = 1;
- am79c961_tx(dev, priv);
- }
- if (status & CSR0_MISS) {
- handled = 1;
- dev->stats.rx_dropped++;
- }
- if (status & CSR0_CERR) {
- handled = 1;
- mod_timer(&priv->timer, jiffies);
- }
- } while (--n && status & (CSR0_RINT | CSR0_TINT));
-
- return IRQ_RETVAL(handled);
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void am79c961_poll_controller(struct net_device *dev)
-{
- unsigned long flags;
- local_irq_save(flags);
- am79c961_interrupt(dev->irq, dev);
- local_irq_restore(flags);
-}
-#endif
-
-/*
- * Initialise the chip. Note that we always expect
- * to be entered with interrupts enabled.
- */
-static int
-am79c961_hw_init(struct net_device *dev)
-{
- struct dev_priv *priv = netdev_priv(dev);
-
- spin_lock_irq(&priv->chip_lock);
- write_rreg (dev->base_addr, CSR0, CSR0_STOP);
- write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
- spin_unlock_irq(&priv->chip_lock);
-
- am79c961_ramtest(dev, 0x66);
- am79c961_ramtest(dev, 0x99);
-
- return 0;
-}
-
-static void __init am79c961_banner(void)
-{
- static unsigned version_printed;
-
- if (net_debug && version_printed++ == 0)
- printk(KERN_INFO "%s", version);
-}
-static const struct net_device_ops am79c961_netdev_ops = {
- .ndo_open = am79c961_open,
- .ndo_stop = am79c961_close,
- .ndo_start_xmit = am79c961_sendpacket,
- .ndo_set_rx_mode = am79c961_setmulticastlist,
- .ndo_tx_timeout = am79c961_timeout,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = am79c961_poll_controller,
-#endif
-};
-
-static int am79c961_probe(struct platform_device *pdev)
-{
- struct resource *res;
- struct net_device *dev;
- struct dev_priv *priv;
- int i, ret;
-
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!res)
- return -ENODEV;
-
- dev = alloc_etherdev(sizeof(struct dev_priv));
- ret = -ENOMEM;
- if (!dev)
- goto out;
-
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- priv = netdev_priv(dev);
-
- /*
- * Fixed address and IRQ lines here.
- * The PNP initialisation should have been
- * done by the ether bootp loader.
- */
- dev->base_addr = res->start;
- ret = platform_get_irq(pdev, 0);
-
- if (ret < 0) {
- ret = -ENODEV;
- goto nodev;
- }
- dev->irq = ret;
-
- ret = -ENODEV;
- if (!request_region(dev->base_addr, 0x18, dev->name))
- goto nodev;
-
- /*
- * Reset the device.
- */
- inb(dev->base_addr + NET_RESET);
- udelay(5);
-
- /*
- * Check the manufacturer part of the
- * ether address.
- */
- if (inb(dev->base_addr) != 0x08 ||
- inb(dev->base_addr + 2) != 0x00 ||
- inb(dev->base_addr + 4) != 0x2b)
- goto release;
-
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff;
-
- am79c961_banner();
-
- spin_lock_init(&priv->chip_lock);
- priv->dev = dev;
- timer_setup(&priv->timer, am79c961_timer, 0);
-
- if (am79c961_hw_init(dev))
- goto release;
-
- dev->netdev_ops = &am79c961_netdev_ops;
-
- ret = register_netdev(dev);
- if (ret == 0) {
- printk(KERN_INFO "%s: ether address %pM\n",
- dev->name, dev->dev_addr);
- return 0;
- }
-
-release:
- release_region(dev->base_addr, 0x18);
-nodev:
- free_netdev(dev);
-out:
- return ret;
-}
-
-static struct platform_driver am79c961_driver = {
- .probe = am79c961_probe,
- .driver = {
- .name = "am79c961",
- },
-};
-
-static int __init am79c961_init(void)
-{
- return platform_driver_register(&am79c961_driver);
-}
-
-__initcall(am79c961_init);
diff --git a/drivers/net/ethernet/amd/am79c961a.h b/drivers/net/ethernet/amd/am79c961a.h
deleted file mode 100644
index 73679e053ceb..000000000000
--- a/drivers/net/ethernet/amd/am79c961a.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/drivers/net/ethernet/amd/am79c961a.h
- */
-
-#ifndef _LINUX_am79c961a_H
-#define _LINUX_am79c961a_H
-
-/* use 0 for production, 1 for verification, >2 for debug. debug flags: */
-#define DEBUG_TX 2
-#define DEBUG_RX 4
-#define DEBUG_INT 8
-#define DEBUG_IC 16
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-
-#define NET_UID 0
-#define NET_RDP 0x10
-#define NET_RAP 0x12
-#define NET_RESET 0x14
-#define NET_IDP 0x16
-
-/*
- * RAP registers
- */
-#define CSR0 0
-#define CSR0_INIT 0x0001
-#define CSR0_STRT 0x0002
-#define CSR0_STOP 0x0004
-#define CSR0_TDMD 0x0008
-#define CSR0_TXON 0x0010
-#define CSR0_RXON 0x0020
-#define CSR0_IENA 0x0040
-#define CSR0_INTR 0x0080
-#define CSR0_IDON 0x0100
-#define CSR0_TINT 0x0200
-#define CSR0_RINT 0x0400
-#define CSR0_MERR 0x0800
-#define CSR0_MISS 0x1000
-#define CSR0_CERR 0x2000
-#define CSR0_BABL 0x4000
-#define CSR0_ERR 0x8000
-
-#define CSR3 3
-#define CSR3_EMBA 0x0008
-#define CSR3_DXMT2PD 0x0010
-#define CSR3_LAPPEN 0x0020
-#define CSR3_DXSUFLO 0x0040
-#define CSR3_IDONM 0x0100
-#define CSR3_TINTM 0x0200
-#define CSR3_RINTM 0x0400
-#define CSR3_MERRM 0x0800
-#define CSR3_MISSM 0x1000
-#define CSR3_BABLM 0x4000
-#define CSR3_MASKALL 0x5F00
-
-#define CSR4 4
-#define CSR4_JABM 0x0001
-#define CSR4_JAB 0x0002
-#define CSR4_TXSTRTM 0x0004
-#define CSR4_TXSTRT 0x0008
-#define CSR4_RCVCCOM 0x0010
-#define CSR4_RCVCCO 0x0020
-#define CSR4_MFCOM 0x0100
-#define CSR4_MFCO 0x0200
-#define CSR4_ASTRP_RCV 0x0400
-#define CSR4_APAD_XMIT 0x0800
-
-#define CTRL1 5
-#define CTRL1_SPND 0x0001
-
-#define LADRL 8
-#define LADRM1 9
-#define LADRM2 10
-#define LADRH 11
-#define PADRL 12
-#define PADRM 13
-#define PADRH 14
-
-#define MODE 15
-#define MODE_DISRX 0x0001
-#define MODE_DISTX 0x0002
-#define MODE_LOOP 0x0004
-#define MODE_DTCRC 0x0008
-#define MODE_COLL 0x0010
-#define MODE_DRETRY 0x0020
-#define MODE_INTLOOP 0x0040
-#define MODE_PORT_AUI 0x0000
-#define MODE_PORT_10BT 0x0080
-#define MODE_DRXPA 0x2000
-#define MODE_DRXBA 0x4000
-#define MODE_PROMISC 0x8000
-
-#define BASERXL 24
-#define BASERXH 25
-#define BASETXL 30
-#define BASETXH 31
-
-#define POLLINT 47
-
-#define SIZERXR 76
-#define SIZETXR 78
-
-#define CSR_MFC 112
-
-#define RMD_ENP 0x0100
-#define RMD_STP 0x0200
-#define RMD_CRC 0x0800
-#define RMD_FRAM 0x2000
-#define RMD_ERR 0x4000
-#define RMD_OWN 0x8000
-
-#define TMD_ENP 0x0100
-#define TMD_STP 0x0200
-#define TMD_MORE 0x1000
-#define TMD_ERR 0x4000
-#define TMD_OWN 0x8000
-
-#define TST_RTRY 0x0400
-#define TST_LCAR 0x0800
-#define TST_LCOL 0x1000
-#define TST_UFLO 0x4000
-#define TST_BUFF 0x8000
-
-#define ISALED0 0x0004
-#define ISALED0_LNKST 0x8000
-
-struct dev_priv {
- unsigned long rxbuffer[RX_BUFFERS];
- unsigned long txbuffer[TX_BUFFERS];
- unsigned char txhead;
- unsigned char txtail;
- unsigned char rxhead;
- unsigned char rxtail;
- unsigned long rxhdr;
- unsigned long txhdr;
- spinlock_t chip_lock;
- struct timer_list timer;
- struct net_device *dev;
-};
-
-#endif
--
2.27.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] net: remove am79c961a driver
2020-10-08 15:46 ` [PATCH 2/3] net: remove am79c961a driver Arnd Bergmann
@ 2020-10-09 17:40 ` Jakub Kicinski
0 siblings, 0 replies; 11+ messages in thread
From: Jakub Kicinski @ 2020-10-09 17:40 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-kernel, Russell King, Thomas Gleixner, Daniel Lezcano,
John Stultz, Stephen Boyd, Linus Walleij, David S. Miller,
netdev, linux-arm-kernel
On Thu, 8 Oct 2020 17:46:00 +0200 Arnd Bergmann wrote:
> This driver was only used on the EBSA110 platform, which is now
> getting removed, so the driver is no longer needed either.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
FWIW
Acked-by: Jakub Kicinski <kuba@kernel.org>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 3/3] timekeeping: remove arch_gettimeoffset
2020-10-08 15:45 [PATCH 0/3] ARM, timers: ebsa110 cleanup Arnd Bergmann
2020-10-08 15:45 ` [PATCH 1/3] ARM: remove ebsa110 platform Arnd Bergmann
2020-10-08 15:46 ` [PATCH 2/3] net: remove am79c961a driver Arnd Bergmann
@ 2020-10-08 15:46 ` Arnd Bergmann
2020-10-14 0:41 ` Thomas Gleixner
2020-10-15 7:53 ` Linus Walleij
2020-10-08 15:55 ` [PATCH 0/3] ARM, timers: ebsa110 cleanup Russell King - ARM Linux admin
3 siblings, 2 replies; 11+ messages in thread
From: Arnd Bergmann @ 2020-10-08 15:46 UTC (permalink / raw)
To: linux-kernel
Cc: Arnd Bergmann, Russell King, Thomas Gleixner, Daniel Lezcano,
John Stultz, Stephen Boyd, Linus Walleij, David S. Miller,
Jakub Kicinski, netdev, linux-arm-kernel
With Arm EBSA110 gone, nothing uses it any more, so the corresponding
code and the Kconfig option can be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
.../time/modern-timekeeping/arch-support.txt | 33 -------------------
drivers/Makefile | 2 --
drivers/clocksource/Kconfig | 2 +-
include/linux/time.h | 13 --------
kernel/time/Kconfig | 9 -----
kernel/time/clocksource.c | 8 -----
kernel/time/timekeeping.c | 25 +-------------
kernel/trace/Kconfig | 2 --
8 files changed, 2 insertions(+), 92 deletions(-)
delete mode 100644 Documentation/features/time/modern-timekeeping/arch-support.txt
diff --git a/Documentation/features/time/modern-timekeeping/arch-support.txt b/Documentation/features/time/modern-timekeeping/arch-support.txt
deleted file mode 100644
index a84c3b9d9a94..000000000000
--- a/Documentation/features/time/modern-timekeeping/arch-support.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# Feature name: modern-timekeeping
-# Kconfig: !ARCH_USES_GETTIMEOFFSET
-# description: arch does not use arch_gettimeoffset() anymore
-#
- -----------------------
- | arch |status|
- -----------------------
- | alpha: | ok |
- | arc: | ok |
- | arm: | TODO |
- | arm64: | ok |
- | c6x: | ok |
- | csky: | ok |
- | h8300: | ok |
- | hexagon: | ok |
- | ia64: | ok |
- | m68k: | ok |
- | microblaze: | ok |
- | mips: | ok |
- | nds32: | ok |
- | nios2: | ok |
- | openrisc: | ok |
- | parisc: | ok |
- | powerpc: | ok |
- | riscv: | ok |
- | s390: | ok |
- | sh: | ok |
- | sparc: | ok |
- | um: | ok |
- | x86: | ok |
- | xtensa: | ok |
- -----------------------
diff --git a/drivers/Makefile b/drivers/Makefile
index c0cd1b9075e3..4ff1e4459512 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -135,9 +135,7 @@ obj-$(CONFIG_INFINIBAND) += infiniband/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
obj-$(CONFIG_SUPERH) += sh/
-ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
obj-y += clocksource/
-endif
obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 68b087bff59c..764936bfcb2c 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -563,7 +563,7 @@ config CLKSRC_QCOM
config CLKSRC_VERSATILE
bool "ARM Versatile (Express) reference platforms clock source" if COMPILE_TEST
- depends on GENERIC_SCHED_CLOCK && !ARCH_USES_GETTIMEOFFSET
+ depends on GENERIC_SCHED_CLOCK
select TIMER_OF
default y if (ARCH_VEXPRESS || ARCH_VERSATILE) && ARM
help
diff --git a/include/linux/time.h b/include/linux/time.h
index b142cb5f5a53..16cf4522d6f3 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -21,19 +21,6 @@ extern time64_t mktime64(const unsigned int year, const unsigned int mon,
const unsigned int day, const unsigned int hour,
const unsigned int min, const unsigned int sec);
-/* Some architectures do not supply their own clocksource.
- * This is mainly the case in architectures that get their
- * inter-tick times by reading the counter on their interval
- * timer. Since these timers wrap every tick, they're not really
- * useful as clocksources. Wrapping them to act like one is possible
- * but not very efficient. So we provide a callout these arches
- * can implement for use with the jiffies clocksource to provide
- * finer then tick granular time.
- */
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-extern u32 (*arch_gettimeoffset)(void);
-#endif
-
#ifdef CONFIG_POSIX_TIMERS
extern void clear_itimer(void);
#else
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index a09b1d61df6a..51d298ccbe05 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -26,10 +26,6 @@ config CLOCKSOURCE_VALIDATE_LAST_CYCLE
config GENERIC_TIME_VSYSCALL
bool
-# Old style timekeeping
-config ARCH_USES_GETTIMEOFFSET
- bool
-
# The generic clock events infrastructure
config GENERIC_CLOCKEVENTS
bool
@@ -72,7 +68,6 @@ config TICK_ONESHOT
config NO_HZ_COMMON
bool
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select TICK_ONESHOT
choice
@@ -87,7 +82,6 @@ config HZ_PERIODIC
config NO_HZ_IDLE
bool "Idle dynticks system (tickless idle)"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select NO_HZ_COMMON
help
This option enables a tickless idle system: timer interrupts
@@ -99,7 +93,6 @@ config NO_HZ_IDLE
config NO_HZ_FULL
bool "Full dynticks system (tickless)"
# NO_HZ_COMMON dependency
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
# We need at least one periodic CPU for timekeeping
depends on SMP
depends on HAVE_CONTEXT_TRACKING
@@ -158,7 +151,6 @@ config CONTEXT_TRACKING_FORCE
config NO_HZ
bool "Old Idle dynticks config"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
help
This is the old config entry that enables dynticks idle.
We keep it around for a little while to enforce backward
@@ -166,7 +158,6 @@ config NO_HZ
config HIGH_RES_TIMERS
bool "High Resolution Timer Support"
- depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select TICK_ONESHOT
help
This option enables high resolution timer support. If your
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 02441ead3c3b..cce484a2cc7c 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -705,8 +705,6 @@ static inline void clocksource_update_max_deferment(struct clocksource *cs)
&cs->max_cycles);
}
-#ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
-
static struct clocksource *clocksource_find_best(bool oneshot, bool skipcur)
{
struct clocksource *cs;
@@ -798,12 +796,6 @@ static void clocksource_select_fallback(void)
__clocksource_select(true);
}
-#else /* !CONFIG_ARCH_USES_GETTIMEOFFSET */
-static inline void clocksource_select(void) { }
-static inline void clocksource_select_fallback(void) { }
-
-#endif
-
/*
* clocksource_done_booting - Called near the end of core bootup
*
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 4c47f388a83f..cf99a9a00716 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -352,13 +352,6 @@ static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock)
/* Timekeeper helper functions. */
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-static u32 default_arch_gettimeoffset(void) { return 0; }
-u32 (*arch_gettimeoffset)(void) = default_arch_gettimeoffset;
-#else
-static inline u32 arch_gettimeoffset(void) { return 0; }
-#endif
-
static inline u64 timekeeping_delta_to_ns(const struct tk_read_base *tkr, u64 delta)
{
u64 nsec;
@@ -366,8 +359,7 @@ static inline u64 timekeeping_delta_to_ns(const struct tk_read_base *tkr, u64 de
nsec = delta * tkr->mult + tkr->xtime_nsec;
nsec >>= tkr->shift;
- /* If arch requires, add in get_arch_timeoffset() */
- return nsec + arch_gettimeoffset();
+ return nsec;
}
static inline u64 timekeeping_get_ns(const struct tk_read_base *tkr)
@@ -707,16 +699,8 @@ static void timekeeping_forward_now(struct timekeeper *tk)
tk->tkr_raw.cycle_last = cycle_now;
tk->tkr_mono.xtime_nsec += delta * tk->tkr_mono.mult;
-
- /* If arch requires, add in get_arch_timeoffset() */
- tk->tkr_mono.xtime_nsec += (u64)arch_gettimeoffset() << tk->tkr_mono.shift;
-
-
tk->tkr_raw.xtime_nsec += delta * tk->tkr_raw.mult;
- /* If arch requires, add in get_arch_timeoffset() */
- tk->tkr_raw.xtime_nsec += (u64)arch_gettimeoffset() << tk->tkr_raw.shift;
-
tk_normalize_xtime(tk);
}
@@ -2062,19 +2046,12 @@ static void timekeeping_advance(enum timekeeping_adv_mode mode)
if (unlikely(timekeeping_suspended))
goto out;
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
- offset = real_tk->cycle_interval;
-
- if (mode != TK_ADV_TICK)
- goto out;
-#else
offset = clocksource_delta(tk_clock_read(&tk->tkr_mono),
tk->tkr_mono.cycle_last, tk->tkr_mono.mask);
/* Check if there's really nothing to do */
if (offset < real_tk->cycle_interval && mode == TK_ADV_TICK)
goto out;
-#endif
/* Do some additional sanity checking */
timekeeping_check_update(tk, offset);
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index a4020c0b4508..b74099f990bf 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -253,7 +253,6 @@ config IRQSOFF_TRACER
bool "Interrupts-off Latency Tracer"
default n
depends on TRACE_IRQFLAGS_SUPPORT
- depends on !ARCH_USES_GETTIMEOFFSET
select TRACE_IRQFLAGS
select GENERIC_TRACER
select TRACER_MAX_TRACE
@@ -277,7 +276,6 @@ config IRQSOFF_TRACER
config PREEMPT_TRACER
bool "Preemption-off Latency Tracer"
default n
- depends on !ARCH_USES_GETTIMEOFFSET
depends on PREEMPTION
select GENERIC_TRACER
select TRACER_MAX_TRACE
--
2.27.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 3/3] timekeeping: remove arch_gettimeoffset
2020-10-08 15:46 ` [PATCH 3/3] timekeeping: remove arch_gettimeoffset Arnd Bergmann
@ 2020-10-14 0:41 ` Thomas Gleixner
2020-10-15 7:53 ` Linus Walleij
1 sibling, 0 replies; 11+ messages in thread
From: Thomas Gleixner @ 2020-10-14 0:41 UTC (permalink / raw)
To: Arnd Bergmann, linux-kernel
Cc: Arnd Bergmann, Russell King, Daniel Lezcano, John Stultz,
Stephen Boyd, Linus Walleij, David S. Miller, Jakub Kicinski,
netdev, linux-arm-kernel
On Thu, Oct 08 2020 at 17:46, Arnd Bergmann wrote:
> With Arm EBSA110 gone, nothing uses it any more, so the corresponding
> code and the Kconfig option can be removed.
Yay! It only took 11+ years to get rid of that.
Feel free to route it through your tree.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 3/3] timekeeping: remove arch_gettimeoffset
2020-10-08 15:46 ` [PATCH 3/3] timekeeping: remove arch_gettimeoffset Arnd Bergmann
2020-10-14 0:41 ` Thomas Gleixner
@ 2020-10-15 7:53 ` Linus Walleij
2020-10-15 9:53 ` Russell King - ARM Linux admin
1 sibling, 1 reply; 11+ messages in thread
From: Linus Walleij @ 2020-10-15 7:53 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-kernel, Russell King, Thomas Gleixner, Daniel Lezcano,
John Stultz, Stephen Boyd, David S. Miller, Jakub Kicinski,
netdev, Linux ARM
On Thu, Oct 8, 2020 at 5:46 PM Arnd Bergmann <arnd@arndb.de> wrote:
> With Arm EBSA110 gone, nothing uses it any more, so the corresponding
> code and the Kconfig option can be removed.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Very nice cleanup.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
At some point we should do a retrospect about how hard it really is for
us to get rid of some really annoying core legacy codepaths and the best
strategy for doing so, even though this took 11+ years as Thomas
says it still looks like a solid path to move over to a generic framework,
only it requires enough gritty people (like you) to hang around and do the
work piece by piece.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 3/3] timekeeping: remove arch_gettimeoffset
2020-10-15 7:53 ` Linus Walleij
@ 2020-10-15 9:53 ` Russell King - ARM Linux admin
2020-10-15 12:38 ` Linus Walleij
0 siblings, 1 reply; 11+ messages in thread
From: Russell King - ARM Linux admin @ 2020-10-15 9:53 UTC (permalink / raw)
To: Linus Walleij
Cc: Arnd Bergmann, linux-kernel, Thomas Gleixner, Daniel Lezcano,
John Stultz, Stephen Boyd, David S. Miller, Jakub Kicinski,
netdev, Linux ARM
On Thu, Oct 15, 2020 at 09:53:29AM +0200, Linus Walleij wrote:
> On Thu, Oct 8, 2020 at 5:46 PM Arnd Bergmann <arnd@arndb.de> wrote:
>
> > With Arm EBSA110 gone, nothing uses it any more, so the corresponding
> > code and the Kconfig option can be removed.
> >
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
>
> Very nice cleanup.
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>
> At some point we should do a retrospect about how hard it really is for
> us to get rid of some really annoying core legacy codepaths and the best
> strategy for doing so, even though this took 11+ years as Thomas
> says it still looks like a solid path to move over to a generic framework,
> only it requires enough gritty people (like you) to hang around and do the
> work piece by piece.
Don't be misled. It was not a matter of "enough gritty people", it
was a matter that EBSA110 was blocking it.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 3/3] timekeeping: remove arch_gettimeoffset
2020-10-15 9:53 ` Russell King - ARM Linux admin
@ 2020-10-15 12:38 ` Linus Walleij
2020-10-18 9:51 ` Russell King - ARM Linux admin
0 siblings, 1 reply; 11+ messages in thread
From: Linus Walleij @ 2020-10-15 12:38 UTC (permalink / raw)
To: Russell King - ARM Linux admin
Cc: Arnd Bergmann, linux-kernel, Thomas Gleixner, Daniel Lezcano,
John Stultz, Stephen Boyd, David S. Miller, Jakub Kicinski,
netdev, Linux ARM
On Thu, Oct 15, 2020 at 11:53 AM Russell King - ARM Linux admin
<linux@armlinux.org.uk> wrote:
> Don't be misled. It was not a matter of "enough gritty people", it
> was a matter that EBSA110 was blocking it.
I remember that EBSA110 was quite different in that it had this
especially limited PIT timer, true that. At one point I even read
up on the details of it and then forgot them :/
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 3/3] timekeeping: remove arch_gettimeoffset
2020-10-15 12:38 ` Linus Walleij
@ 2020-10-18 9:51 ` Russell King - ARM Linux admin
0 siblings, 0 replies; 11+ messages in thread
From: Russell King - ARM Linux admin @ 2020-10-18 9:51 UTC (permalink / raw)
To: Linus Walleij
Cc: Arnd Bergmann, linux-kernel, Thomas Gleixner, Daniel Lezcano,
John Stultz, Stephen Boyd, David S. Miller, Jakub Kicinski,
netdev, Linux ARM
On Thu, Oct 15, 2020 at 02:38:07PM +0200, Linus Walleij wrote:
> On Thu, Oct 15, 2020 at 11:53 AM Russell King - ARM Linux admin
> <linux@armlinux.org.uk> wrote:
>
> > Don't be misled. It was not a matter of "enough gritty people", it
> > was a matter that EBSA110 was blocking it.
>
> I remember that EBSA110 was quite different in that it had this
> especially limited PIT timer, true that. At one point I even read
> up on the details of it and then forgot them :/
Yes, it was so basic that it required software to reprogram it on every
interrupt - it had no sensible periodic mode. The side effect of which
was that unless done carefully, your timekeeping varied all over the
place (so much that ntpd was not happy.) The final implementation made
ntpd really quite happy on the machine despite the timer's weirdness,
up until Linux stopped allowing interrupts to be nested. At that point,
it was back to utterly crap timekeeping.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 0/3] ARM, timers: ebsa110 cleanup
2020-10-08 15:45 [PATCH 0/3] ARM, timers: ebsa110 cleanup Arnd Bergmann
` (2 preceding siblings ...)
2020-10-08 15:46 ` [PATCH 3/3] timekeeping: remove arch_gettimeoffset Arnd Bergmann
@ 2020-10-08 15:55 ` Russell King - ARM Linux admin
3 siblings, 0 replies; 11+ messages in thread
From: Russell King - ARM Linux admin @ 2020-10-08 15:55 UTC (permalink / raw)
To: Arnd Bergmann
Cc: linux-kernel, Thomas Gleixner, Daniel Lezcano, John Stultz,
Stephen Boyd, Linus Walleij, David S. Miller, Jakub Kicinski,
netdev, linux-arm-kernel
On Thu, Oct 08, 2020 at 05:45:58PM +0200, Arnd Bergmann wrote:
> The ebsa110 platform is the last thing that uses
> CONFIG_ARCH_USES_GETTIMEOFFSET, and Russell has previously said that he
> thinks the platform can be retired now.
>
> Removing it allows us clean up the timer code by throwing out all of
> the references to arch_gettimeoffset().
>
> The am79c961a network driver can presumably also go, as no other platform
> references it.
As far as I know, that is correct; it's rather specific to the
platform.
> I don't expect these to make it into the coming merge window, posting here
> as an RFC, and as a reference for the mildly related timer tick series.
For the ebsa110 and am79c961a patches:
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
^ permalink raw reply [flat|nested] 11+ messages in thread