* [PATCH v2] net: ftgmac100: Fix crash when removing driver
@ 2020-11-16 3:27 Joel Stanley
2020-11-17 1:20 ` Jakub Kicinski
0 siblings, 1 reply; 3+ messages in thread
From: Joel Stanley @ 2020-11-16 3:27 UTC (permalink / raw)
To: Benjamin Herrenschmidt, David S . Miller, Jakub Kicinski
Cc: Andrew Jeffery, Ivan Mikhaylov, netdev
When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific))
in net/core/dev.c due to still having the NC-SI packet handler
registered.
# echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind
------------[ cut here ]------------
kernel BUG at net/core/dev.c:10254!
Internal error: Oops - BUG: 0 [#1] SMP ARM
CPU: 0 PID: 115 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00007-g02e0365710c4 #46
Hardware name: Generic DT based system
PC is at netdev_run_todo+0x314/0x394
LR is at cpumask_next+0x20/0x24
pc : [<806f5830>] lr : [<80863cb0>] psr: 80000153
sp : 855bbd58 ip : 00000001 fp : 855bbdac
r10: 80c03d00 r9 : 80c06228 r8 : 81158c54
r7 : 00000000 r6 : 80c05dec r5 : 80c05d18 r4 : 813b9280
r3 : 813b9054 r2 : 8122c470 r1 : 00000002 r0 : 00000002
Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none
Control: 00c5387d Table: 85514008 DAC: 00000051
Process sh (pid: 115, stack limit = 0x7cb5703d)
...
Backtrace:
[<806f551c>] (netdev_run_todo) from [<80707eec>] (rtnl_unlock+0x18/0x1c)
r10:00000051 r9:854ed710 r8:81158c54 r7:80c76bb0 r6:81158c10 r5:8115b410
r4:813b9000
[<80707ed4>] (rtnl_unlock) from [<806f5db8>] (unregister_netdev+0x2c/0x30)
[<806f5d8c>] (unregister_netdev) from [<805a8180>] (ftgmac100_remove+0x20/0xa8)
r5:8115b410 r4:813b9000
[<805a8160>] (ftgmac100_remove) from [<805355e4>] (platform_drv_remove+0x34/0x4c)
Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode")
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v2: Also unregister in _probe
drivers/net/ethernet/faraday/ftgmac100.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 983b6db2d80d..88bfe2107938 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1926,6 +1926,8 @@ static int ftgmac100_probe(struct platform_device *pdev)
err_phy_connect:
ftgmac100_phy_disconnect(netdev);
err_ncsi_dev:
+ if (priv->ndev)
+ ncsi_unregister_dev(priv->ndev);
ftgmac100_destroy_mdio(netdev);
err_setup_mdio:
iounmap(priv->base);
@@ -1945,6 +1947,8 @@ static int ftgmac100_remove(struct platform_device *pdev)
netdev = platform_get_drvdata(pdev);
priv = netdev_priv(netdev);
+ if (priv->ndev)
+ ncsi_unregister_dev(priv->ndev);
unregister_netdev(netdev);
clk_disable_unprepare(priv->rclk);
--
2.29.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] net: ftgmac100: Fix crash when removing driver
2020-11-16 3:27 [PATCH v2] net: ftgmac100: Fix crash when removing driver Joel Stanley
@ 2020-11-17 1:20 ` Jakub Kicinski
2020-11-17 1:21 ` Jakub Kicinski
0 siblings, 1 reply; 3+ messages in thread
From: Jakub Kicinski @ 2020-11-17 1:20 UTC (permalink / raw)
To: Joel Stanley
Cc: Benjamin Herrenschmidt, David S . Miller, Andrew Jeffery,
Ivan Mikhaylov, netdev
On Mon, 16 Nov 2020 13:57:15 +1030 Joel Stanley wrote:
> When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific))
> in net/core/dev.c due to still having the NC-SI packet handler
> registered.
>
> # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind
> ------------[ cut here ]------------
> kernel BUG at net/core/dev.c:10254!
> Internal error: Oops - BUG: 0 [#1] SMP ARM
> CPU: 0 PID: 115 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00007-g02e0365710c4 #46
> Hardware name: Generic DT based system
> PC is at netdev_run_todo+0x314/0x394
> LR is at cpumask_next+0x20/0x24
> pc : [<806f5830>] lr : [<80863cb0>] psr: 80000153
> sp : 855bbd58 ip : 00000001 fp : 855bbdac
> r10: 80c03d00 r9 : 80c06228 r8 : 81158c54
> r7 : 00000000 r6 : 80c05dec r5 : 80c05d18 r4 : 813b9280
> r3 : 813b9054 r2 : 8122c470 r1 : 00000002 r0 : 00000002
> Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none
> Control: 00c5387d Table: 85514008 DAC: 00000051
> Process sh (pid: 115, stack limit = 0x7cb5703d)
> ...
> Backtrace:
> [<806f551c>] (netdev_run_todo) from [<80707eec>] (rtnl_unlock+0x18/0x1c)
> r10:00000051 r9:854ed710 r8:81158c54 r7:80c76bb0 r6:81158c10 r5:8115b410
> r4:813b9000
> [<80707ed4>] (rtnl_unlock) from [<806f5db8>] (unregister_netdev+0x2c/0x30)
> [<806f5d8c>] (unregister_netdev) from [<805a8180>] (ftgmac100_remove+0x20/0xa8)
> r5:8115b410 r4:813b9000
> [<805a8160>] (ftgmac100_remove) from [<805355e4>] (platform_drv_remove+0x34/0x4c)
>
> Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode")
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
> index 983b6db2d80d..88bfe2107938 100644
> --- a/drivers/net/ethernet/faraday/ftgmac100.c
> +++ b/drivers/net/ethernet/faraday/ftgmac100.c
> @@ -1926,6 +1926,8 @@ static int ftgmac100_probe(struct platform_device *pdev)
> err_phy_connect:
> ftgmac100_phy_disconnect(netdev);
This line does not exist in net, only in net-next, please respin on top
of net so we can apply this to Linux 5.10 and backport to older stable
releases.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] net: ftgmac100: Fix crash when removing driver
2020-11-17 1:20 ` Jakub Kicinski
@ 2020-11-17 1:21 ` Jakub Kicinski
0 siblings, 0 replies; 3+ messages in thread
From: Jakub Kicinski @ 2020-11-17 1:21 UTC (permalink / raw)
To: Joel Stanley
Cc: Benjamin Herrenschmidt, David S . Miller, Andrew Jeffery,
Ivan Mikhaylov, netdev
On Mon, 16 Nov 2020 17:20:44 -0800 Jakub Kicinski wrote:
> On Mon, 16 Nov 2020 13:57:15 +1030 Joel Stanley wrote:
> > When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific))
> > in net/core/dev.c due to still having the NC-SI packet handler
> > registered.
> >
> > # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind
> > ------------[ cut here ]------------
> > kernel BUG at net/core/dev.c:10254!
> > Internal error: Oops - BUG: 0 [#1] SMP ARM
> > CPU: 0 PID: 115 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00007-g02e0365710c4 #46
> > Hardware name: Generic DT based system
> > PC is at netdev_run_todo+0x314/0x394
> > LR is at cpumask_next+0x20/0x24
> > pc : [<806f5830>] lr : [<80863cb0>] psr: 80000153
> > sp : 855bbd58 ip : 00000001 fp : 855bbdac
> > r10: 80c03d00 r9 : 80c06228 r8 : 81158c54
> > r7 : 00000000 r6 : 80c05dec r5 : 80c05d18 r4 : 813b9280
> > r3 : 813b9054 r2 : 8122c470 r1 : 00000002 r0 : 00000002
> > Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none
> > Control: 00c5387d Table: 85514008 DAC: 00000051
> > Process sh (pid: 115, stack limit = 0x7cb5703d)
> > ...
> > Backtrace:
> > [<806f551c>] (netdev_run_todo) from [<80707eec>] (rtnl_unlock+0x18/0x1c)
> > r10:00000051 r9:854ed710 r8:81158c54 r7:80c76bb0 r6:81158c10 r5:8115b410
> > r4:813b9000
> > [<80707ed4>] (rtnl_unlock) from [<806f5db8>] (unregister_netdev+0x2c/0x30)
> > [<806f5d8c>] (unregister_netdev) from [<805a8180>] (ftgmac100_remove+0x20/0xa8)
> > r5:8115b410 r4:813b9000
> > [<805a8160>] (ftgmac100_remove) from [<805355e4>] (platform_drv_remove+0x34/0x4c)
> >
> > Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode")
> > Signed-off-by: Joel Stanley <joel@jms.id.au>
>
> > diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
> > index 983b6db2d80d..88bfe2107938 100644
> > --- a/drivers/net/ethernet/faraday/ftgmac100.c
> > +++ b/drivers/net/ethernet/faraday/ftgmac100.c
> > @@ -1926,6 +1926,8 @@ static int ftgmac100_probe(struct platform_device *pdev)
> > err_phy_connect:
> > ftgmac100_phy_disconnect(netdev);
>
> This line does not exist in net, only in net-next, please respin on top
> of net so we can apply this to Linux 5.10 and backport to older stable
> releases.
Ah, and when you respin please put [PATCH net v3] in the subject so
that bots know which tree to test against.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-11-17 1:21 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-16 3:27 [PATCH v2] net: ftgmac100: Fix crash when removing driver Joel Stanley
2020-11-17 1:20 ` Jakub Kicinski
2020-11-17 1:21 ` Jakub Kicinski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).