[PATCH v10,net-next,0/3] Add Support for Marvell OcteonTX2 Cryptographic

[PATCH v10,net-next,0/3] Add Support for Marvell OcteonTX2 Cryptographic

[Srujana Challa]

This patchset adds support for CPT in OcteonTX2 admin function(AF).
CPT is a cryptographic accelerator unit and it includes microcoded
Giga Cipher engines.

OcteonTX2 SOC's resource virtualization unit (RVU) supports multiple
physical and virtual functions. Each of the PF/VF's functionality is
determined by what kind of resources are attached to it. When the CPT
block is attached to a VF, it can function as a security device.
The following document provides an overview of the hardware and
different drivers for the OcteonTX2 SOC:
https://www.kernel.org/doc/Documentation/networking/device_drivers/marvell/octeontx2.rst

This patch series includes:
- Patch to update existing Marvell sources to support CPT.
- Patch that adds mailbox messages to the admin function (AF) driver,
to configure CPT HW registers.
- Patch to provide debug information about CPT.

Changes since v9:
 * Dropped CPT PF & VF driver patches to submit to cryptodev-2.6 in next
   release cycle.
Changes since v8:
 * Load firmware files individually instead of tar.
Changes since v7:
 * Removed writable entries in debugfs.
 * Dropped IPsec support.
Changes since v6:
 * Removed driver version.
Changes since v4:
 * Rebased the patches onto net-next tree with base
   'commit bc081a693a56 ("Merge branch 'Offload-tc-vlan-mangle-to-mscc_ocelot-switch'")'
Changes since v3:
 * Splitup the patches into smaller patches with more informartion.
Changes since v2:
 * Fixed C=1 warnings.
 * Added code to exit CPT VF driver gracefully.
 * Moved OcteonTx2 asm code to a header file under include/linux/soc/
Changes since v1:
 * Moved Makefile changes from patch4 to patch2 and patch3.

Srujana Challa (3):
  octeontx2-pf: move lmt flush to include/linux/soc
  octeontx2-af: add mailbox interface for CPT
  octeontx2-af: add debugfs entries for CPT block

 MAINTAINERS                                   |   2 +
 .../ethernet/marvell/octeontx2/af/Makefile    |   3 +-
 .../net/ethernet/marvell/octeontx2/af/mbox.h  |  33 +++
 .../net/ethernet/marvell/octeontx2/af/rvu.h   |   1 +
 .../ethernet/marvell/octeontx2/af/rvu_cpt.c   | 233 +++++++++++++++
 .../marvell/octeontx2/af/rvu_debugfs.c        | 272 ++++++++++++++++++
 .../ethernet/marvell/octeontx2/af/rvu_reg.h   |  63 +++-
 .../marvell/octeontx2/nic/otx2_common.h       |  13 +-
 include/linux/soc/marvell/octeontx2/asm.h     |  29 ++
 9 files changed, 630 insertions(+), 19 deletions(-)
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
 create mode 100644 include/linux/soc/marvell/octeontx2/asm.h

-- 
2.29.0

[PATCH v10,net-next,1/3] octeontx2-pf: move lmt flush to include/linux/soc

[Srujana Challa]

On OcteonTX2 platform CPT instruction enqueue and NIX
packet send are only possible via LMTST operations which
uses LDEOR instruction. This patch moves lmt flush
function from OcteonTX2 nic driver to include/linux/soc
since it will be used by OcteonTX2 CPT and NIC driver for
LMTST.

Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
---
 MAINTAINERS                                   |  2 ++
 .../marvell/octeontx2/nic/otx2_common.h       | 13 +--------
 include/linux/soc/marvell/octeontx2/asm.h     | 29 +++++++++++++++++++
 3 files changed, 32 insertions(+), 12 deletions(-)
 create mode 100644 include/linux/soc/marvell/octeontx2/asm.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 3341959af0c7..0169168dcd59 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10470,6 +10470,7 @@ M:	Srujana Challa <schalla@marvell.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
 F:	drivers/crypto/marvell/
+F:	include/linux/soc/marvell/octeontx2/
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
@@ -10542,6 +10543,7 @@ M:	hariprasad <hkelam@marvell.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/marvell/octeontx2/nic/
+F:	include/linux/soc/marvell/octeontx2/
 
 MARVELL OCTEONTX2 RVU ADMIN FUNCTION DRIVER
 M:	Sunil Goutham <sgoutham@marvell.com>
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index b18b45d02165..ceec649bdd13 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -16,6 +16,7 @@
 #include <linux/net_tstamp.h>
 #include <linux/ptp_clock_kernel.h>
 #include <linux/timecounter.h>
+#include <linux/soc/marvell/octeontx2/asm.h>
 
 #include <mbox.h>
 #include <npc.h>
@@ -462,21 +463,9 @@ static inline u64 otx2_atomic64_add(u64 incr, u64 *ptr)
 	return result;
 }
 
-static inline u64 otx2_lmt_flush(uint64_t addr)
-{
-	u64 result = 0;
-
-	__asm__ volatile(".cpu  generic+lse\n"
-			 "ldeor xzr,%x[rf],[%[rs]]"
-			 : [rf]"=r"(result)
-			 : [rs]"r"(addr));
-	return result;
-}
-
 #else
 #define otx2_write128(lo, hi, addr)
 #define otx2_atomic64_add(incr, ptr)		({ *ptr += incr; })
-#define otx2_lmt_flush(addr)			({ 0; })
 #endif
 
 /* Alloc pointer from pool/aura */
diff --git a/include/linux/soc/marvell/octeontx2/asm.h b/include/linux/soc/marvell/octeontx2/asm.h
new file mode 100644
index 000000000000..ae2279fe830a
--- /dev/null
+++ b/include/linux/soc/marvell/octeontx2/asm.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only
+ * Copyright (C) 2020 Marvell.
+ */
+
+#ifndef __SOC_OTX2_ASM_H
+#define __SOC_OTX2_ASM_H
+
+#if defined(CONFIG_ARM64)
+/*
+ * otx2_lmt_flush is used for LMT store operation.
+ * On octeontx2 platform CPT instruction enqueue and
+ * NIX packet send are only possible via LMTST
+ * operations and it uses LDEOR instruction targeting
+ * the coprocessor address.
+ */
+#define otx2_lmt_flush(ioaddr)                          \
+({                                                      \
+	u64 result = 0;                                 \
+	__asm__ volatile(".cpu  generic+lse\n"          \
+			 "ldeor xzr, %x[rf], [%[rs]]"   \
+			 : [rf]"=r" (result)            \
+			 : [rs]"r" (ioaddr));           \
+	(result);                                       \
+})
+#else
+#define otx2_lmt_flush(ioaddr)          ({ 0; })
+#endif
+
+#endif /* __SOC_OTX2_ASM_H */
-- 
2.29.0

[PATCH v10,net-next,2/3] octeontx2-af: add mailbox interface for CPT

[Srujana Challa]

On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs. This patch adds
a mailbox interface for CPT PFs and VFs to allocate resources
for cryptography. It also adds hardware CPT AF register defines.

Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
---
 .../ethernet/marvell/octeontx2/af/Makefile    |   3 +-
 .../net/ethernet/marvell/octeontx2/af/mbox.h  |  33 +++
 .../ethernet/marvell/octeontx2/af/rvu_cpt.c   | 233 ++++++++++++++++++
 .../ethernet/marvell/octeontx2/af/rvu_reg.h   |  63 ++++-
 4 files changed, 325 insertions(+), 7 deletions(-)
 create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/Makefile b/drivers/net/ethernet/marvell/octeontx2/af/Makefile
index ffc681b67f1c..7100d1dd856e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/Makefile
+++ b/drivers/net/ethernet/marvell/octeontx2/af/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_OCTEONTX2_AF) += octeontx2_af.o
 
 octeontx2_mbox-y := mbox.o rvu_trace.o
 octeontx2_af-y := cgx.o rvu.o rvu_cgx.o rvu_npa.o rvu_nix.o \
-		  rvu_reg.o rvu_npc.o rvu_debugfs.o ptp.o rvu_npc_fs.o
+		  rvu_reg.o rvu_npc.o rvu_debugfs.o ptp.o rvu_npc_fs.o \
+		  rvu_cpt.o
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index cb4e3d86b58b..221fe5b7c093 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -158,6 +158,11 @@ M(NPA_HWCTX_DISABLE,	0x403, npa_hwctx_disable, hwctx_disable_req, msg_rsp)\
 /* SSO/SSOW mbox IDs (range 0x600 - 0x7FF) */				\
 /* TIM mbox IDs (range 0x800 - 0x9FF) */				\
 /* CPT mbox IDs (range 0xA00 - 0xBFF) */				\
+M(CPT_LF_ALLOC,		0xA00, cpt_lf_alloc, cpt_lf_alloc_req_msg,	\
+			       msg_rsp)					\
+M(CPT_LF_FREE,		0xA01, cpt_lf_free, msg_req, msg_rsp)		\
+M(CPT_RD_WR_REGISTER,	0xA02, cpt_rd_wr_register,  cpt_rd_wr_reg_msg,	\
+			       cpt_rd_wr_reg_msg)			\
 /* NPC mbox IDs (range 0x6000 - 0x7FFF) */				\
 M(NPC_MCAM_ALLOC_ENTRY,	0x6000, npc_mcam_alloc_entry, npc_mcam_alloc_entry_req,\
 				npc_mcam_alloc_entry_rsp)		\
@@ -1046,4 +1051,32 @@ struct ptp_rsp {
 	u64 clk;
 };
 
+/* CPT mailbox error codes
+ * Range 901 - 1000.
+ */
+enum cpt_af_status {
+	CPT_AF_ERR_PARAM		= -901,
+	CPT_AF_ERR_GRP_INVALID		= -902,
+	CPT_AF_ERR_LF_INVALID		= -903,
+	CPT_AF_ERR_ACCESS_DENIED	= -904,
+	CPT_AF_ERR_SSO_PF_FUNC_INVALID	= -905,
+	CPT_AF_ERR_NIX_PF_FUNC_INVALID	= -906
+};
+
+/* CPT mbox message formats */
+struct cpt_rd_wr_reg_msg {
+	struct mbox_msghdr hdr;
+	u64 reg_offset;
+	u64 *ret_val;
+	u64 val;
+	u8 is_write;
+};
+
+struct cpt_lf_alloc_req_msg {
+	struct mbox_msghdr hdr;
+	u16 nix_pf_func;
+	u16 sso_pf_func;
+	u16 eng_grpmsk;
+};
+
 #endif /* MBOX_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
new file mode 100644
index 000000000000..35261d52c997
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (C) 2020 Marvell. */
+
+#include <linux/pci.h>
+#include "rvu_struct.h"
+#include "rvu_reg.h"
+#include "mbox.h"
+#include "rvu.h"
+
+/* CPT PF device id */
+#define	PCI_DEVID_OTX2_CPT_PF	0xA0FD
+
+static int get_cpt_pf_num(struct rvu *rvu)
+{
+	int i, domain_nr, cpt_pf_num = -1;
+	struct pci_dev *pdev;
+
+	domain_nr = pci_domain_nr(rvu->pdev->bus);
+	for (i = 0; i < rvu->hw->total_pfs; i++) {
+		pdev = pci_get_domain_bus_and_slot(domain_nr, i + 1, 0);
+		if (!pdev)
+			continue;
+
+		if (pdev->device == PCI_DEVID_OTX2_CPT_PF) {
+			cpt_pf_num = i;
+			put_device(&pdev->dev);
+			break;
+		}
+		put_device(&pdev->dev);
+	}
+	return cpt_pf_num;
+}
+
+static bool is_cpt_pf(struct rvu *rvu, u16 pcifunc)
+{
+	int cpt_pf_num = get_cpt_pf_num(rvu);
+
+	if (rvu_get_pf(pcifunc) != cpt_pf_num)
+		return false;
+	if (pcifunc & RVU_PFVF_FUNC_MASK)
+		return false;
+
+	return true;
+}
+
+static bool is_cpt_vf(struct rvu *rvu, u16 pcifunc)
+{
+	int cpt_pf_num = get_cpt_pf_num(rvu);
+
+	if (rvu_get_pf(pcifunc) != cpt_pf_num)
+		return false;
+	if (!(pcifunc & RVU_PFVF_FUNC_MASK))
+		return false;
+
+	return true;
+}
+
+int rvu_mbox_handler_cpt_lf_alloc(struct rvu *rvu,
+				  struct cpt_lf_alloc_req_msg *req,
+				  struct msg_rsp *rsp)
+{
+	u16 pcifunc = req->hdr.pcifunc;
+	struct rvu_block *block;
+	int cptlf, blkaddr;
+	int num_lfs, slot;
+	u64 val;
+
+	if (req->eng_grpmsk == 0x0)
+		return CPT_AF_ERR_GRP_INVALID;
+
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_CPT, 0);
+	if (blkaddr < 0)
+		return blkaddr;
+
+	block = &rvu->hw->block[blkaddr];
+	num_lfs = rvu_get_rsrc_mapcount(rvu_get_pfvf(rvu, pcifunc),
+					block->addr);
+	if (!num_lfs)
+		return CPT_AF_ERR_LF_INVALID;
+
+	/* Check if requested 'CPTLF <=> NIXLF' mapping is valid */
+	if (req->nix_pf_func) {
+		/* If default, use 'this' CPTLF's PFFUNC */
+		if (req->nix_pf_func == RVU_DEFAULT_PF_FUNC)
+			req->nix_pf_func = pcifunc;
+		if (!is_pffunc_map_valid(rvu, req->nix_pf_func, BLKTYPE_NIX))
+			return CPT_AF_ERR_NIX_PF_FUNC_INVALID;
+	}
+
+	/* Check if requested 'CPTLF <=> SSOLF' mapping is valid */
+	if (req->sso_pf_func) {
+		/* If default, use 'this' CPTLF's PFFUNC */
+		if (req->sso_pf_func == RVU_DEFAULT_PF_FUNC)
+			req->sso_pf_func = pcifunc;
+		if (!is_pffunc_map_valid(rvu, req->sso_pf_func, BLKTYPE_SSO))
+			return CPT_AF_ERR_SSO_PF_FUNC_INVALID;
+	}
+
+	for (slot = 0; slot < num_lfs; slot++) {
+		cptlf = rvu_get_lf(rvu, block, pcifunc, slot);
+		if (cptlf < 0)
+			return CPT_AF_ERR_LF_INVALID;
+
+		/* Set CPT LF group and priority */
+		val = (u64)req->eng_grpmsk << 48 | 1;
+		rvu_write64(rvu, blkaddr, CPT_AF_LFX_CTL(cptlf), val);
+
+		/* Set CPT LF NIX_PF_FUNC and SSO_PF_FUNC */
+		val = (u64)req->nix_pf_func << 48 |
+		      (u64)req->sso_pf_func << 32;
+		rvu_write64(rvu, blkaddr, CPT_AF_LFX_CTL2(cptlf), val);
+	}
+
+	return 0;
+}
+
+int rvu_mbox_handler_cpt_lf_free(struct rvu *rvu, struct msg_req *req,
+				 struct msg_rsp *rsp)
+{
+	u16 pcifunc = req->hdr.pcifunc;
+	struct rvu_block *block;
+	int cptlf, blkaddr;
+	int num_lfs, slot;
+
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_CPT, 0);
+	if (blkaddr < 0)
+		return blkaddr;
+
+	block = &rvu->hw->block[blkaddr];
+	num_lfs = rvu_get_rsrc_mapcount(rvu_get_pfvf(rvu, pcifunc),
+					block->addr);
+	if (!num_lfs)
+		return CPT_AF_ERR_LF_INVALID;
+
+	for (slot = 0; slot < num_lfs; slot++) {
+		cptlf = rvu_get_lf(rvu, block, pcifunc, slot);
+		if (cptlf < 0)
+			return CPT_AF_ERR_LF_INVALID;
+
+		/* Reset CPT LF group and priority */
+		rvu_write64(rvu, blkaddr, CPT_AF_LFX_CTL(cptlf), 0x0);
+		/* Reset CPT LF NIX_PF_FUNC and SSO_PF_FUNC */
+		rvu_write64(rvu, blkaddr, CPT_AF_LFX_CTL2(cptlf), 0x0);
+	}
+
+	return 0;
+}
+
+static bool is_valid_offset(struct rvu *rvu, struct cpt_rd_wr_reg_msg *req)
+{
+	u64 offset = req->reg_offset;
+	int blkaddr, num_lfs, lf;
+	struct rvu_block *block;
+	struct rvu_pfvf *pfvf;
+
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_CPT, 0);
+
+	/* Registers that can be accessed from PF/VF */
+	if ((offset & 0xFF000) ==  CPT_AF_LFX_CTL(0) ||
+	    (offset & 0xFF000) ==  CPT_AF_LFX_CTL2(0)) {
+		if (offset & 7)
+			return false;
+
+		lf = (offset & 0xFFF) >> 3;
+		block = &rvu->hw->block[blkaddr];
+		pfvf = rvu_get_pfvf(rvu, req->hdr.pcifunc);
+		num_lfs = rvu_get_rsrc_mapcount(pfvf, block->addr);
+		if (lf >= num_lfs)
+			/* Slot is not valid for that PF/VF */
+			return false;
+
+		/* Translate local LF used by VFs to global CPT LF */
+		lf = rvu_get_lf(rvu, &rvu->hw->block[blkaddr],
+				req->hdr.pcifunc, lf);
+		if (lf < 0)
+			return false;
+
+		return true;
+	} else if (!(req->hdr.pcifunc & RVU_PFVF_FUNC_MASK)) {
+		/* Registers that can be accessed from PF */
+		switch (offset) {
+		case CPT_AF_CTL:
+		case CPT_AF_PF_FUNC:
+		case CPT_AF_BLK_RST:
+		case CPT_AF_CONSTANTS1:
+			return true;
+		}
+
+		switch (offset & 0xFF000) {
+		case CPT_AF_EXEX_STS(0):
+		case CPT_AF_EXEX_CTL(0):
+		case CPT_AF_EXEX_CTL2(0):
+		case CPT_AF_EXEX_UCODE_BASE(0):
+			if (offset & 7)
+				return false;
+			break;
+		default:
+			return false;
+		}
+		return true;
+	}
+	return false;
+}
+
+int rvu_mbox_handler_cpt_rd_wr_register(struct rvu *rvu,
+					struct cpt_rd_wr_reg_msg *req,
+					struct cpt_rd_wr_reg_msg *rsp)
+{
+	int blkaddr;
+
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_CPT, 0);
+	if (blkaddr < 0)
+		return blkaddr;
+
+	/* This message is accepted only if sent from CPT PF/VF */
+	if (!is_cpt_pf(rvu, req->hdr.pcifunc) &&
+	    !is_cpt_vf(rvu, req->hdr.pcifunc))
+		return CPT_AF_ERR_ACCESS_DENIED;
+
+	rsp->reg_offset = req->reg_offset;
+	rsp->ret_val = req->ret_val;
+	rsp->is_write = req->is_write;
+
+	if (!is_valid_offset(rvu, req))
+		return CPT_AF_ERR_ACCESS_DENIED;
+
+	if (req->is_write)
+		rvu_write64(rvu, blkaddr, req->reg_offset, req->val);
+	else
+		rsp->val = rvu_read64(rvu, blkaddr, req->reg_offset);
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
index 1f3379f12b81..0fb2aa909a23 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
@@ -429,12 +429,63 @@
 #define TIM_AF_LF_RST			(0x20)
 
 /* CPT */
-#define CPT_AF_CONSTANTS0		(0x0000)
-#define CPT_PRIV_LFX_CFG		(0x41000)
-#define CPT_PRIV_LFX_INT_CFG		(0x43000)
-#define CPT_AF_RVU_LF_CFG_DEBUG		(0x45000)
-#define CPT_AF_LF_RST			(0x44000)
-#define CPT_AF_BLK_RST			(0x46000)
+#define CPT_AF_CONSTANTS0               (0x0000)
+#define CPT_AF_CONSTANTS1               (0x1000)
+#define CPT_AF_DIAG                     (0x3000)
+#define CPT_AF_ECO                      (0x4000)
+#define CPT_AF_FLTX_INT(a)              (0xa000ull | (u64)(a) << 3)
+#define CPT_AF_FLTX_INT_W1S(a)          (0xb000ull | (u64)(a) << 3)
+#define CPT_AF_FLTX_INT_ENA_W1C(a)      (0xc000ull | (u64)(a) << 3)
+#define CPT_AF_FLTX_INT_ENA_W1S(a)      (0xd000ull | (u64)(a) << 3)
+#define CPT_AF_PSNX_EXE(a)              (0xe000ull | (u64)(a) << 3)
+#define CPT_AF_PSNX_EXE_W1S(a)          (0xf000ull | (u64)(a) << 3)
+#define CPT_AF_PSNX_LF(a)               (0x10000ull | (u64)(a) << 3)
+#define CPT_AF_PSNX_LF_W1S(a)           (0x11000ull | (u64)(a) << 3)
+#define CPT_AF_EXEX_CTL2(a)             (0x12000ull | (u64)(a) << 3)
+#define CPT_AF_EXEX_STS(a)              (0x13000ull | (u64)(a) << 3)
+#define CPT_AF_EXE_ERR_INFO             (0x14000)
+#define CPT_AF_EXEX_ACTIVE(a)           (0x16000ull | (u64)(a) << 3)
+#define CPT_AF_INST_REQ_PC              (0x17000)
+#define CPT_AF_INST_LATENCY_PC          (0x18000)
+#define CPT_AF_RD_REQ_PC                (0x19000)
+#define CPT_AF_RD_LATENCY_PC            (0x1a000)
+#define CPT_AF_RD_UC_PC                 (0x1b000)
+#define CPT_AF_ACTIVE_CYCLES_PC         (0x1c000)
+#define CPT_AF_EXE_DBG_CTL              (0x1d000)
+#define CPT_AF_EXE_DBG_DATA             (0x1e000)
+#define CPT_AF_EXE_REQ_TIMER            (0x1f000)
+#define CPT_AF_EXEX_CTL(a)              (0x20000ull | (u64)(a) << 3)
+#define CPT_AF_EXE_PERF_CTL             (0x21000)
+#define CPT_AF_EXE_DBG_CNTX(a)          (0x22000ull | (u64)(a) << 3)
+#define CPT_AF_EXE_PERF_EVENT_CNT       (0x23000)
+#define CPT_AF_EXE_EPCI_INBX_CNT(a)     (0x24000ull | (u64)(a) << 3)
+#define CPT_AF_EXE_EPCI_OUTBX_CNT(a)    (0x25000ull | (u64)(a) << 3)
+#define CPT_AF_EXEX_UCODE_BASE(a)       (0x26000ull | (u64)(a) << 3)
+#define CPT_AF_LFX_CTL(a)               (0x27000ull | (u64)(a) << 3)
+#define CPT_AF_LFX_CTL2(a)              (0x29000ull | (u64)(a) << 3)
+#define CPT_AF_CPTCLK_CNT               (0x2a000)
+#define CPT_AF_PF_FUNC                  (0x2b000)
+#define CPT_AF_LFX_PTR_CTL(a)           (0x2c000ull | (u64)(a) << 3)
+#define CPT_AF_GRPX_THR(a)              (0x2d000ull | (u64)(a) << 3)
+#define CPT_AF_CTL                      (0x2e000ull)
+#define CPT_AF_XEX_THR(a)               (0x2f000ull | (u64)(a) << 3)
+#define CPT_PRIV_LFX_CFG                (0x41000)
+#define CPT_PRIV_AF_INT_CFG             (0x42000)
+#define CPT_PRIV_LFX_INT_CFG            (0x43000)
+#define CPT_AF_LF_RST                   (0x44000)
+#define CPT_AF_RVU_LF_CFG_DEBUG         (0x45000)
+#define CPT_AF_BLK_RST                  (0x46000)
+#define CPT_AF_RVU_INT                  (0x47000)
+#define CPT_AF_RVU_INT_W1S              (0x47008)
+#define CPT_AF_RVU_INT_ENA_W1S          (0x47010)
+#define CPT_AF_RVU_INT_ENA_W1C          (0x47018)
+#define CPT_AF_RAS_INT                  (0x47020)
+#define CPT_AF_RAS_INT_W1S              (0x47028)
+#define CPT_AF_RAS_INT_ENA_W1S          (0x47030)
+#define CPT_AF_RAS_INT_ENA_W1C          (0x47038)
+
+#define CPT_AF_LF_CTL2_SHIFT 3
+#define CPT_AF_LF_SSO_PF_FUNC_SHIFT 32
 
 #define NPC_AF_BLK_RST                  (0x00040)
 
-- 
2.29.0

[PATCH v10,net-next,3/3] octeontx2-af: add debugfs entries for CPT block

[Srujana Challa]

Add entries to debugfs at /sys/kernel/debug/octeontx2/cpt.

cpt_pc: dump cpt performance HW registers.
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_pc

cpt_ae_sts: show cpt asymmetric engines current state
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_ae_sts

cpt_se_sts: show cpt symmetric engines current state
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_se_sts

cpt_engines_info: dump cpt engine control registers.
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_engines_info

cpt_lfs_info: dump cpt lfs control registers.
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_lfs_info

cpt_err_info: dump cpt error registers.
Usage:
cat /sys/kernel/debug/octeontx2/cpt/cpt_err_info

Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
---
 .../net/ethernet/marvell/octeontx2/af/rvu.h   |   1 +
 .../marvell/octeontx2/af/rvu_debugfs.c        | 272 ++++++++++++++++++
 2 files changed, 273 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index 37774bac32b0..b6c0977499ab 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -52,6 +52,7 @@ struct rvu_debugfs {
 	struct dentry *npa;
 	struct dentry *nix;
 	struct dentry *npc;
+	struct dentry *cpt;
 	struct dump_ctx npa_aura_ctx;
 	struct dump_ctx npa_pool_ctx;
 	struct dump_ctx nix_cq_ctx;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
index 39e1a614aaf8..c383efc6b90c 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
@@ -109,6 +109,12 @@ static char *cgx_tx_stats_fields[] = {
 	[CGX_STAT17]	= "Control/PAUSE packets sent",
 };
 
+enum cpt_eng_type {
+	CPT_AE_TYPE = 1,
+	CPT_SE_TYPE = 2,
+	CPT_IE_TYPE = 3,
+};
+
 #define NDC_MAX_BANK(rvu, blk_addr) (rvu_read64(rvu, \
 						blk_addr, NDC_AF_CONST) & 0xFF)
 
@@ -1993,6 +1999,271 @@ static void rvu_dbg_npc_init(struct rvu *rvu)
 	debugfs_remove_recursive(rvu->rvu_dbg.npc);
 }
 
+/* CPT debugfs APIs */
+static int cpt_eng_sts_display(struct seq_file *filp, u8 eng_type)
+{
+	struct rvu *rvu = filp->private;
+	u64 busy_sts = 0, free_sts = 0;
+	u32 e_min = 0, e_max = 0, e, i;
+	u16 max_ses, max_ies, max_aes;
+	int blkaddr;
+	u64 reg;
+
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_CPT, 0);
+	if (blkaddr < 0)
+		return -ENODEV;
+
+	reg = rvu_read64(rvu, blkaddr, CPT_AF_CONSTANTS1);
+	max_ses = reg & 0xffff;
+	max_ies = (reg >> 16) & 0xffff;
+	max_aes = (reg >> 32) & 0xffff;
+
+	switch (eng_type) {
+	case CPT_AE_TYPE:
+		e_min = max_ses + max_ies;
+		e_max = max_ses + max_ies + max_aes;
+		break;
+	case CPT_SE_TYPE:
+		e_min = 0;
+		e_max = max_ses;
+		break;
+	case CPT_IE_TYPE:
+		e_min = max_ses;
+		e_max = max_ses + max_ies;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (e = e_min, i = 0; e < e_max; e++, i++) {
+		reg = rvu_read64(rvu, blkaddr, CPT_AF_EXEX_STS(e));
+		if (reg & 0x1)
+			busy_sts |= 1ULL << i;
+
+		if (reg & 0x2)
+			free_sts |= 1ULL << i;
+	}
+	seq_printf(filp, "FREE STS : 0x%016llx\n", free_sts);
+	seq_printf(filp, "BUSY STS : 0x%016llx\n", busy_sts);
+
+	return 0;
+}
+
+static int rvu_dbg_cpt_ae_sts_display(struct seq_file *filp, void *unused)
+{
+	return cpt_eng_sts_display(filp, CPT_AE_TYPE);
+}
+
+RVU_DEBUG_SEQ_FOPS(cpt_ae_sts, cpt_ae_sts_display, NULL);
+
+static int rvu_dbg_cpt_se_sts_display(struct seq_file *filp, void *unused)
+{
+	return cpt_eng_sts_display(filp, CPT_SE_TYPE);
+}
+
+RVU_DEBUG_SEQ_FOPS(cpt_se_sts, cpt_se_sts_display, NULL);
+
+static int rvu_dbg_cpt_ie_sts_display(struct seq_file *filp, void *unused)
+{
+	return cpt_eng_sts_display(filp, CPT_IE_TYPE);
+}
+
+RVU_DEBUG_SEQ_FOPS(cpt_ie_sts, cpt_ie_sts_display, NULL);
+
+static int rvu_dbg_cpt_engines_info_display(struct seq_file *filp, void *unused)
+{
+	struct rvu *rvu = filp->private;
+	u16 max_ses, max_ies, max_aes;
+	u32 e_max, e;
+	int blkaddr;
+	u64 reg;
+
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_CPT, 0);
+	if (blkaddr < 0)
+		return -ENODEV;
+
+	reg = rvu_read64(rvu, blkaddr, CPT_AF_CONSTANTS1);
+	max_ses = reg & 0xffff;
+	max_ies = (reg >> 16) & 0xffff;
+	max_aes = (reg >> 32) & 0xffff;
+
+	e_max = max_ses + max_ies + max_aes;
+
+	seq_puts(filp, "===========================================\n");
+	for (e = 0; e < e_max; e++) {
+		reg = rvu_read64(rvu, blkaddr, CPT_AF_EXEX_CTL2(e));
+		seq_printf(filp, "CPT Engine[%u] Group Enable   0x%02llx\n", e,
+			   reg & 0xff);
+		reg = rvu_read64(rvu, blkaddr, CPT_AF_EXEX_ACTIVE(e));
+		seq_printf(filp, "CPT Engine[%u] Active Info    0x%llx\n", e,
+			   reg);
+		reg = rvu_read64(rvu, blkaddr, CPT_AF_EXEX_CTL(e));
+		seq_printf(filp, "CPT Engine[%u] Control        0x%llx\n", e,
+			   reg);
+		seq_puts(filp, "===========================================\n");
+	}
+	return 0;
+}
+
+RVU_DEBUG_SEQ_FOPS(cpt_engines_info, cpt_engines_info_display, NULL);
+
+static int rvu_dbg_cpt_lfs_info_display(struct seq_file *filp, void *unused)
+{
+	struct rvu *rvu = filp->private;
+	struct rvu_hwinfo *hw = rvu->hw;
+	struct rvu_block *block;
+	int blkaddr;
+	u64 reg;
+	u32 lf;
+
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_CPT, 0);
+	if (blkaddr < 0)
+		return -ENODEV;
+
+	block = &hw->block[blkaddr];
+	if (!block->lf.bmap)
+		return -ENODEV;
+
+	seq_puts(filp, "===========================================\n");
+	for (lf = 0; lf < block->lf.max; lf++) {
+		reg = rvu_read64(rvu, blkaddr, CPT_AF_LFX_CTL(lf));
+		seq_printf(filp, "CPT Lf[%u] CTL          0x%llx\n", lf, reg);
+		reg = rvu_read64(rvu, blkaddr, CPT_AF_LFX_CTL2(lf));
+		seq_printf(filp, "CPT Lf[%u] CTL2         0x%llx\n", lf, reg);
+		reg = rvu_read64(rvu, blkaddr, CPT_AF_LFX_PTR_CTL(lf));
+		seq_printf(filp, "CPT Lf[%u] PTR_CTL      0x%llx\n", lf, reg);
+		reg = rvu_read64(rvu, blkaddr, block->lfcfg_reg |
+				(lf << block->lfshift));
+		seq_printf(filp, "CPT Lf[%u] CFG          0x%llx\n", lf, reg);
+		seq_puts(filp, "===========================================\n");
+	}
+	return 0;
+}
+
+RVU_DEBUG_SEQ_FOPS(cpt_lfs_info, cpt_lfs_info_display, NULL);
+
+static int rvu_dbg_cpt_err_info_display(struct seq_file *filp, void *unused)
+{
+	struct rvu *rvu = filp->private;
+	u64 reg0, reg1;
+	int blkaddr;
+
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_CPT, 0);
+	if (blkaddr < 0)
+		return -ENODEV;
+
+	reg0 = rvu_read64(rvu, blkaddr, CPT_AF_FLTX_INT(0));
+	reg1 = rvu_read64(rvu, blkaddr, CPT_AF_FLTX_INT(1));
+	seq_printf(filp, "CPT_AF_FLTX_INT:       0x%llx 0x%llx\n", reg0, reg1);
+	reg0 = rvu_read64(rvu, blkaddr, CPT_AF_PSNX_EXE(0));
+	reg1 = rvu_read64(rvu, blkaddr, CPT_AF_PSNX_EXE(1));
+	seq_printf(filp, "CPT_AF_PSNX_EXE:       0x%llx 0x%llx\n", reg0, reg1);
+	reg0 = rvu_read64(rvu, blkaddr, CPT_AF_PSNX_LF(0));
+	seq_printf(filp, "CPT_AF_PSNX_LF:        0x%llx\n", reg0);
+	reg0 = rvu_read64(rvu, blkaddr, CPT_AF_RVU_INT);
+	seq_printf(filp, "CPT_AF_RVU_INT:        0x%llx\n", reg0);
+	reg0 = rvu_read64(rvu, blkaddr, CPT_AF_RAS_INT);
+	seq_printf(filp, "CPT_AF_RAS_INT:        0x%llx\n", reg0);
+	reg0 = rvu_read64(rvu, blkaddr, CPT_AF_EXE_ERR_INFO);
+	seq_printf(filp, "CPT_AF_EXE_ERR_INFO:   0x%llx\n", reg0);
+
+	return 0;
+}
+
+RVU_DEBUG_SEQ_FOPS(cpt_err_info, cpt_err_info_display, NULL);
+
+static int rvu_dbg_cpt_pc_display(struct seq_file *filp, void *unused)
+{
+	struct rvu *rvu;
+	int blkaddr;
+	u64 reg;
+
+	rvu = filp->private;
+	blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_CPT, 0);
+	if (blkaddr < 0)
+		return -ENODEV;
+
+	reg = rvu_read64(rvu, blkaddr, CPT_AF_INST_REQ_PC);
+	seq_printf(filp, "CPT instruction requests   %llu\n", reg);
+	reg = rvu_read64(rvu, blkaddr, CPT_AF_INST_LATENCY_PC);
+	seq_printf(filp, "CPT instruction latency    %llu\n", reg);
+	reg = rvu_read64(rvu, blkaddr, CPT_AF_RD_REQ_PC);
+	seq_printf(filp, "CPT NCB read requests      %llu\n", reg);
+	reg = rvu_read64(rvu, blkaddr, CPT_AF_RD_LATENCY_PC);
+	seq_printf(filp, "CPT NCB read latency       %llu\n", reg);
+	reg = rvu_read64(rvu, blkaddr, CPT_AF_RD_UC_PC);
+	seq_printf(filp, "CPT read requests caused by UC fills   %llu\n", reg);
+	reg = rvu_read64(rvu, blkaddr, CPT_AF_ACTIVE_CYCLES_PC);
+	seq_printf(filp, "CPT active cycles pc       %llu\n", reg);
+	reg = rvu_read64(rvu, blkaddr, CPT_AF_CPTCLK_CNT);
+	seq_printf(filp, "CPT clock count pc         %llu\n", reg);
+
+	return 0;
+}
+
+RVU_DEBUG_SEQ_FOPS(cpt_pc, cpt_pc_display, NULL);
+
+static void rvu_dbg_cpt_init(struct rvu *rvu)
+{
+	const struct device *dev = &rvu->pdev->dev;
+	struct dentry *pfile;
+
+	if (!is_block_implemented(rvu->hw, BLKADDR_CPT0))
+		return;
+
+	rvu->rvu_dbg.cpt = debugfs_create_dir("cpt", rvu->rvu_dbg.root);
+	if (!rvu->rvu_dbg.cpt)
+		return;
+
+	pfile = debugfs_create_file("cpt_pc", 0600,
+				    rvu->rvu_dbg.cpt, rvu,
+				    &rvu_dbg_cpt_pc_fops);
+	if (!pfile)
+		goto create_failed;
+
+	pfile = debugfs_create_file("cpt_ae_sts", 0600,
+				    rvu->rvu_dbg.cpt, rvu,
+				    &rvu_dbg_cpt_ae_sts_fops);
+	if (!pfile)
+		goto create_failed;
+
+	pfile = debugfs_create_file("cpt_se_sts", 0600,
+				    rvu->rvu_dbg.cpt, rvu,
+				    &rvu_dbg_cpt_se_sts_fops);
+	if (!pfile)
+		goto create_failed;
+
+	pfile = debugfs_create_file("cpt_ie_sts", 0600,
+				    rvu->rvu_dbg.cpt, rvu,
+				    &rvu_dbg_cpt_ie_sts_fops);
+	if (!pfile)
+		goto create_failed;
+
+	pfile = debugfs_create_file("cpt_engines_info", 0600,
+				    rvu->rvu_dbg.cpt, rvu,
+				    &rvu_dbg_cpt_engines_info_fops);
+	if (!pfile)
+		goto create_failed;
+
+	pfile = debugfs_create_file("cpt_lfs_info", 0600,
+				    rvu->rvu_dbg.cpt, rvu,
+				    &rvu_dbg_cpt_lfs_info_fops);
+	if (!pfile)
+		goto create_failed;
+
+	pfile = debugfs_create_file("cpt_err_info", 0600,
+				    rvu->rvu_dbg.cpt, rvu,
+				    &rvu_dbg_cpt_err_info_fops);
+	if (!pfile)
+		goto create_failed;
+
+	return;
+
+create_failed:
+	dev_err(dev, "Failed to create debugfs dir/file for CPT\n");
+	debugfs_remove_recursive(rvu->rvu_dbg.cpt);
+}
+
 void rvu_dbg_init(struct rvu *rvu)
 {
 	struct device *dev = &rvu->pdev->dev;
@@ -2019,6 +2290,7 @@ void rvu_dbg_init(struct rvu *rvu)
 	rvu_dbg_nix_init(rvu, BLKADDR_NIX1);
 	rvu_dbg_cgx_init(rvu);
 	rvu_dbg_npc_init(rvu);
+	rvu_dbg_cpt_init(rvu);
 
 	return;
 
-- 
2.29.0

Re: [PATCH v10,net-next,0/3] Add Support for Marvell OcteonTX2 Cryptographic

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Wed, 18 Nov 2020 17:14:13 +0530 you wrote:
> This patchset adds support for CPT in OcteonTX2 admin function(AF).
> CPT is a cryptographic accelerator unit and it includes microcoded
> Giga Cipher engines.
> 
> OcteonTX2 SOC's resource virtualization unit (RVU) supports multiple
> physical and virtual functions. Each of the PF/VF's functionality is
> determined by what kind of resources are attached to it. When the CPT
> block is attached to a VF, it can function as a security device.
> The following document provides an overview of the hardware and
> different drivers for the OcteonTX2 SOC:
> https://www.kernel.org/doc/Documentation/networking/device_drivers/marvell/octeontx2.rst
> 
> [...]

Here is the summary with links:
  - [v10,net-next,1/3] octeontx2-pf: move lmt flush to include/linux/soc
    https://git.kernel.org/netdev/net-next/c/956fb852181e
  - [v10,net-next,2/3] octeontx2-af: add mailbox interface for CPT
    https://git.kernel.org/netdev/net-next/c/ae454086e3c2
  - [v10,net-next,3/3] octeontx2-af: add debugfs entries for CPT block
    https://git.kernel.org/netdev/net-next/c/76638a2e5850

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html