[PATCH AUTOSEL 5.10 014/217] bpf: Use separate lockdep class for each hashtab

[PATCH AUTOSEL 5.10 014/217] bpf: Use separate lockdep class for each hashtab

[Sasha Levin]

From: Song Liu <songliubraving@fb.com>

[ Upstream commit c50eb518e262fa06bd334e6eec172eaf5d7a5bd9 ]

If a hashtab is accessed in both NMI and non-NMI contexts, it may cause
deadlock in bucket->lock. LOCKDEP NMI warning highlighted this issue:

./test_progs -t stacktrace

[   74.828970]
[   74.828971] ================================
[   74.828972] WARNING: inconsistent lock state
[   74.828973] 5.9.0-rc8+ #275 Not tainted
[   74.828974] --------------------------------
[   74.828975] inconsistent {INITIAL USE} -> {IN-NMI} usage.
[   74.828976] taskset/1174 [HC2[2]:SC0[0]:HE0:SE1] takes:
[   74.828977] ffffc90000ee96b0 (&htab->buckets[i].raw_lock){....}-{2:2}, at: htab_map_update_elem+0x271/0x5a0
[   74.828981] {INITIAL USE} state was registered at:
[   74.828982]   lock_acquire+0x137/0x510
[   74.828983]   _raw_spin_lock_irqsave+0x43/0x90
[   74.828984]   htab_map_update_elem+0x271/0x5a0
[   74.828984]   0xffffffffa0040b34
[   74.828985]   trace_call_bpf+0x159/0x310
[   74.828986]   perf_trace_run_bpf_submit+0x5f/0xd0
[   74.828987]   perf_trace_urandom_read+0x1be/0x220
[   74.828988]   urandom_read_nowarn.isra.0+0x26f/0x380
[   74.828989]   vfs_read+0xf8/0x280
[   74.828989]   ksys_read+0xc9/0x160
[   74.828990]   do_syscall_64+0x33/0x40
[   74.828991]   entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   74.828992] irq event stamp: 1766
[   74.828993] hardirqs last  enabled at (1765): [<ffffffff82800ace>] asm_exc_page_fault+0x1e/0x30
[   74.828994] hardirqs last disabled at (1766): [<ffffffff8267df87>] irqentry_enter+0x37/0x60
[   74.828995] softirqs last  enabled at (856): [<ffffffff81043e7c>] fpu__clear+0xac/0x120
[   74.828996] softirqs last disabled at (854): [<ffffffff81043df0>] fpu__clear+0x20/0x120
[   74.828997]
[   74.828998] other info that might help us debug this:
[   74.828999]  Possible unsafe locking scenario:
[   74.828999]
[   74.829000]        CPU0
[   74.829001]        ----
[   74.829001]   lock(&htab->buckets[i].raw_lock);
[   74.829003]   <Interrupt>
[   74.829004]     lock(&htab->buckets[i].raw_lock);
[   74.829006]
[   74.829006]  *** DEADLOCK ***
[   74.829007]
[   74.829008] 1 lock held by taskset/1174:
[   74.829008]  #0: ffff8883ec3fd020 (&cpuctx_lock){-...}-{2:2}, at: perf_event_task_tick+0x101/0x650
[   74.829012]
[   74.829013] stack backtrace:
[   74.829014] CPU: 0 PID: 1174 Comm: taskset Not tainted 5.9.0-rc8+ #275
[   74.829015] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
[   74.829016] Call Trace:
[   74.829016]  <NMI>
[   74.829017]  dump_stack+0x9a/0xd0
[   74.829018]  lock_acquire+0x461/0x510
[   74.829019]  ? lock_release+0x6b0/0x6b0
[   74.829020]  ? stack_map_get_build_id_offset+0x45e/0x800
[   74.829021]  ? htab_map_update_elem+0x271/0x5a0
[   74.829022]  ? rcu_read_lock_held_common+0x1a/0x50
[   74.829022]  ? rcu_read_lock_held+0x5f/0xb0
[   74.829023]  _raw_spin_lock_irqsave+0x43/0x90
[   74.829024]  ? htab_map_update_elem+0x271/0x5a0
[   74.829025]  htab_map_update_elem+0x271/0x5a0
[   74.829026]  bpf_prog_1fd9e30e1438d3c5_oncpu+0x9c/0xe88
[   74.829027]  bpf_overflow_handler+0x127/0x320
[   74.829028]  ? perf_event_text_poke_output+0x4d0/0x4d0
[   74.829029]  ? sched_clock_cpu+0x18/0x130
[   74.829030]  __perf_event_overflow+0xae/0x190
[   74.829030]  handle_pmi_common+0x34c/0x470
[   74.829031]  ? intel_pmu_save_and_restart+0x90/0x90
[   74.829032]  ? lock_acquire+0x3f8/0x510
[   74.829033]  ? lock_release+0x6b0/0x6b0
[   74.829034]  intel_pmu_handle_irq+0x11e/0x240
[   74.829034]  perf_event_nmi_handler+0x40/0x60
[   74.829035]  nmi_handle+0x110/0x360
[   74.829036]  ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829037]  default_do_nmi+0x6b/0x170
[   74.829038]  exc_nmi+0x106/0x130
[   74.829038]  end_repeat_nmi+0x16/0x55
[   74.829039] RIP: 0010:__intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829042] Code: 2f 1f 03 48 8d bb b8 0c 00 00 e8 29 09 41 00 48 ...
[   74.829043] RSP: 0000:ffff8880a604fc90 EFLAGS: 00000002
[   74.829044] RAX: 000000070000000f RBX: ffff8883ec2195a0 RCX: 000000000000038f
[   74.829045] RDX: 0000000000000007 RSI: ffffffff82e72c20 RDI: ffff8883ec21a258
[   74.829046] RBP: 000000070000000f R08: ffffffff8101b013 R09: fffffbfff0a7982d
[   74.829047] R10: ffffffff853cc167 R11: fffffbfff0a7982c R12: 0000000000000000
[   74.829049] R13: ffff8883ec3f0af0 R14: ffff8883ec3fd120 R15: ffff8883e9c92098
[   74.829049]  ? intel_pmu_lbr_enable_all+0x43/0x240
[   74.829050]  ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829051]  ? __intel_pmu_enable_all.constprop.0+0x72/0xf0
[   74.829052]  </NMI>
[   74.829053]  perf_event_task_tick+0x48d/0x650
[   74.829054]  scheduler_tick+0x129/0x210
[   74.829054]  update_process_times+0x37/0x70
[   74.829055]  tick_sched_handle.isra.0+0x35/0x90
[   74.829056]  tick_sched_timer+0x8f/0xb0
[   74.829057]  __hrtimer_run_queues+0x364/0x7d0
[   74.829058]  ? tick_sched_do_timer+0xa0/0xa0
[   74.829058]  ? enqueue_hrtimer+0x1e0/0x1e0
[   74.829059]  ? recalibrate_cpu_khz+0x10/0x10
[   74.829060]  ? ktime_get_update_offsets_now+0x1a3/0x360
[   74.829061]  hrtimer_interrupt+0x1bb/0x360
[   74.829062]  ? rcu_read_lock_sched_held+0xa1/0xd0
[   74.829063]  __sysvec_apic_timer_interrupt+0xed/0x3d0
[   74.829064]  sysvec_apic_timer_interrupt+0x3f/0xd0
[   74.829064]  ? asm_sysvec_apic_timer_interrupt+0xa/0x20
[   74.829065]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[   74.829066] RIP: 0033:0x7fba18d579b4
[   74.829068] Code: 74 54 44 0f b6 4a 04 41 83 e1 0f 41 80 f9 ...
[   74.829069] RSP: 002b:00007ffc9ba69570 EFLAGS: 00000206
[   74.829071] RAX: 00007fba192084c0 RBX: 00007fba18c24d28 RCX: 00000000000007a4
[   74.829072] RDX: 00007fba18c30488 RSI: 0000000000000000 RDI: 000000000000037b
[   74.829073] RBP: 00007fba18ca5760 R08: 00007fba18c248fc R09: 00007fba18c94c30
[   74.829074] R10: 000000000000002f R11: 0000000000073c30 R12: 00007ffc9ba695e0
[   74.829075] R13: 00000000000003f3 R14: 00007fba18c21ac8 R15: 00000000000058d6

However, such warning should not apply across multiple hashtabs. The
system will not deadlock if one hashtab is used in NMI, while another
hashtab is used in non-NMI.

Use separate lockdep class for each hashtab, so that we don't get this
false alert.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201029071925.3103400-2-songliubraving@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/hashtab.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
index 1fccba6e88c4e..224e2652a7c64 100644
--- a/kernel/bpf/hashtab.c
+++ b/kernel/bpf/hashtab.c
@@ -99,6 +99,7 @@ struct bpf_htab {
 	u32 n_buckets;	/* number of hash buckets */
 	u32 elem_size;	/* size of each element in bytes */
 	u32 hashrnd;
+	struct lock_class_key lockdep_key;
 };
 
 /* each htab element is struct htab_elem + key + value */
@@ -136,12 +137,18 @@ static void htab_init_buckets(struct bpf_htab *htab)
 {
 	unsigned i;
 
+	lockdep_register_key(&htab->lockdep_key);
 	for (i = 0; i < htab->n_buckets; i++) {
 		INIT_HLIST_NULLS_HEAD(&htab->buckets[i].head, i);
-		if (htab_use_raw_lock(htab))
+		if (htab_use_raw_lock(htab)) {
 			raw_spin_lock_init(&htab->buckets[i].raw_lock);
-		else
+			lockdep_set_class(&htab->buckets[i].raw_lock,
+					  &htab->lockdep_key);
+		} else {
 			spin_lock_init(&htab->buckets[i].lock);
+			lockdep_set_class(&htab->buckets[i].lock,
+					  &htab->lockdep_key);
+		}
 	}
 }
 
@@ -1338,6 +1345,7 @@ static void htab_map_free(struct bpf_map *map)
 
 	free_percpu(htab->extra_elems);
 	bpf_map_area_free(htab->buckets);
+	lockdep_unregister_key(&htab->lockdep_key);
 	kfree(htab);
 }
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 016/217] staging: wimax: depends on NET

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 9364a2cf567187c0a075942c22d1f434c758de5d ]

Fix build errors when CONFIG_NET is not enabled. E.g. (trimmed):

ld: drivers/staging/wimax/op-msg.o: in function `wimax_msg_alloc':
op-msg.c:(.text+0xa9): undefined reference to `__alloc_skb'
ld: op-msg.c:(.text+0xcc): undefined reference to `genlmsg_put'
ld: op-msg.c:(.text+0xfc): undefined reference to `nla_put'
ld: op-msg.c:(.text+0x168): undefined reference to `kfree_skb'
ld: drivers/staging/wimax/op-msg.o: in function `wimax_msg_data_len':
op-msg.c:(.text+0x1ba): undefined reference to `nla_find'
ld: drivers/staging/wimax/op-msg.o: in function `wimax_msg_send':
op-msg.c:(.text+0x311): undefined reference to `init_net'
ld: op-msg.c:(.text+0x326): undefined reference to `netlink_broadcast'
ld: drivers/staging/wimax/stack.o: in function `__wimax_state_change':
stack.c:(.text+0x433): undefined reference to `netif_carrier_off'
ld: stack.c:(.text+0x46b): undefined reference to `netif_carrier_on'
ld: stack.c:(.text+0x478): undefined reference to `netif_tx_wake_queue'
ld: drivers/staging/wimax/stack.o: in function `wimax_subsys_exit':
stack.c:(.exit.text+0xe): undefined reference to `genl_unregister_family'
ld: drivers/staging/wimax/stack.o: in function `wimax_subsys_init':
stack.c:(.init.text+0x1a): undefined reference to `genl_register_family'

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: netdev@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201102072456.20303-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wimax/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/wimax/Kconfig b/net/wimax/Kconfig
index d13762bc4abca..4dcb5eba720a3 100644
--- a/net/wimax/Kconfig
+++ b/net/wimax/Kconfig
@@ -5,6 +5,7 @@
 
 menuconfig WIMAX
 	tristate "WiMAX Wireless Broadband support"
+	depends on NET
 	depends on RFKILL || !RFKILL
 	help
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 026/217] net: ethernet: ti: am65-cpsw: fix tx csum offload for multi mac mode

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 97067aaf127487788a297267dede0008cd75bb7b ]

The current implementation uses .ndo_set_features() callback to track
NETIF_F_HW_CSUM feature changes and update generic
CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option accordingly. It's not going to
work in case of multi-port devices as TX csum offload can be changed per
netdev.

On K3 CPSWxG devices TX csum offload enabled in the following way:

 - the CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option enables TX csum offload in
generic and affects all TX DMA channels and packets;

 - corresponding fields in TX DMA descriptor have to be filed properly when
upper layer wants to offload TX csum (skb->ip_summed == CHECKSUM_PARTIAL)
and it's per-packet option.

The Linux Network core is expected to never request TX csum offload if
netdev NETIF_F_HW_CSUM feature is disabled, and, as result, TX DMA
descriptors should not be modified, and per-packet TX csum offload will be
disabled (or enabled) on per-netdev basis. Which, in turn, makes it safe to
enable the CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option unconditionally.

Hence, fix TX csum offload for multi-port devices by:
 - enabling the CPSW_P0_CONTROL_REG.RX_CHECKSUM_EN option in
am65_cpsw_nuss_common_open() unconditionally
 - and removing .ndo_set_features() callback implementation, which was used
only NETIF_F_HW_CSUM feature update purposes

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c | 30 +-----------------------
 1 file changed, 1 insertion(+), 29 deletions(-)

diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index 501d676fd88b9..9c359570178c1 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -426,9 +426,7 @@ static int am65_cpsw_nuss_common_open(struct am65_cpsw_common *common,
 	writel(common->rx_flow_id_base,
 	       host_p->port_base + AM65_CPSW_PORT0_REG_FLOW_ID_OFFSET);
 	/* en tx crc offload */
-	if (features & NETIF_F_HW_CSUM)
-		writel(AM65_CPSW_P0_REG_CTL_RX_CHECKSUM_EN,
-		       host_p->port_base + AM65_CPSW_P0_REG_CTL);
+	writel(AM65_CPSW_P0_REG_CTL_RX_CHECKSUM_EN, host_p->port_base + AM65_CPSW_P0_REG_CTL);
 
 	am65_cpsw_nuss_set_p0_ptype(common);
 
@@ -1369,31 +1367,6 @@ static void am65_cpsw_nuss_ndo_get_stats(struct net_device *dev,
 	stats->tx_dropped	= dev->stats.tx_dropped;
 }
 
-static int am65_cpsw_nuss_ndo_slave_set_features(struct net_device *ndev,
-						 netdev_features_t features)
-{
-	struct am65_cpsw_common *common = am65_ndev_to_common(ndev);
-	netdev_features_t changes = features ^ ndev->features;
-	struct am65_cpsw_host *host_p;
-
-	host_p = am65_common_get_host(common);
-
-	if (changes & NETIF_F_HW_CSUM) {
-		bool enable = !!(features & NETIF_F_HW_CSUM);
-
-		dev_info(common->dev, "Turn %s tx-checksum-ip-generic\n",
-			 enable ? "ON" : "OFF");
-		if (enable)
-			writel(AM65_CPSW_P0_REG_CTL_RX_CHECKSUM_EN,
-			       host_p->port_base + AM65_CPSW_P0_REG_CTL);
-		else
-			writel(0,
-			       host_p->port_base + AM65_CPSW_P0_REG_CTL);
-	}
-
-	return 0;
-}
-
 static const struct net_device_ops am65_cpsw_nuss_netdev_ops_2g = {
 	.ndo_open		= am65_cpsw_nuss_ndo_slave_open,
 	.ndo_stop		= am65_cpsw_nuss_ndo_slave_stop,
@@ -1406,7 +1379,6 @@ static const struct net_device_ops am65_cpsw_nuss_netdev_ops_2g = {
 	.ndo_vlan_rx_add_vid	= am65_cpsw_nuss_ndo_slave_add_vid,
 	.ndo_vlan_rx_kill_vid	= am65_cpsw_nuss_ndo_slave_kill_vid,
 	.ndo_do_ioctl		= am65_cpsw_nuss_ndo_slave_ioctl,
-	.ndo_set_features	= am65_cpsw_nuss_ndo_slave_set_features,
 	.ndo_setup_tc           = am65_cpsw_qos_ndo_setup_tc,
 };
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 027/217] net: mscc: ocelot: don't reset the pvid to 0 when deleting it

[Sasha Levin]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 110e847ca7d5e712cabc8cb866a66b629832f4a2 ]

I have no idea why this code is here, but I have 2 hypotheses:

1.
A desperate attempt to keep untagged traffic working when the bridge
deletes the pvid on a port.

There was a fairly okay discussion here:
https://lore.kernel.org/netdev/CA+h21hrRMrLH-RjBGhEJSTZd6_QPRSd3RkVRQF-wNKkrgKcRSA@mail.gmail.com/#t
which established that in vlan_filtering=1 mode, the absence of a pvid
should denote that the ingress port should drop untagged and priority
tagged traffic. While in vlan_filtering=0 mode, nothing should change.

So in vlan_filtering=1 mode, we should simply let things happen, and not
attempt to save the day. And in vlan_filtering=0 mode, the pvid is 0
anyway, no need to do anything.

2.
The driver encodes the native VLAN (ocelot_port->vid) value of 0 as
special, meaning "not valid". There are checks based on that. But there
are no such checks for the ocelot_port->pvid value of 0. In fact, that's
a perfectly valid value, which is used in standalone mode. Maybe there
was some confusion and the author thought that 0 means "invalid" here as
well.

In conclusion, delete the code*.

*in fact we'll add it back later, in a slightly different form, but for
an entirely different reason than the one for which this exists now.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mscc/ocelot.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index a53bd36b11c60..ba17cd64c352e 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -289,10 +289,6 @@ int ocelot_vlan_del(struct ocelot *ocelot, int port, u16 vid)
 	if (ret)
 		return ret;
 
-	/* Ingress */
-	if (ocelot_port->pvid == vid)
-		ocelot_port_set_pvid(ocelot, port, 0);
-
 	/* Egress */
 	if (ocelot_port->vid == vid)
 		ocelot_port_set_native_vlan(ocelot, port, 0);
-- 
2.27.0

[PATCH AUTOSEL 5.10 037/217] mac80211: don't overwrite QoS TID of injected frames

[Sasha Levin]

From: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>

[ Upstream commit 527d675969a1dff17baa270d4447ac1c87058299 ]

Currently ieee80211_set_qos_hdr sets the QoS TID of all frames based
on the value assigned to skb->priority. This means it will also
overwrite the QoS TID of injected frames. The commit 753ffad3d624
("mac80211: fix TID field in monitor mode transmit") prevented
injected frames from being modified because of this by setting
skb->priority to the TID of the injected frame, which assured the
QoS TID will not be changed to a different value. Unfortunately,
this workaround complicates the handling of injected frames because
we can't set skb->priority without affecting the TID value in the
QoS field of injected frames.

To avoid this, and to simplify the next patch, detect if a frame is
injected in ieee80211_set_qos_hdr and if so do not change its QoS
field.

Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20201104061823.197407-4-Mathy.Vanhoef@kuleuven.be
[fix typos in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/tx.c  | 5 +----
 net/mac80211/wme.c | 8 ++++++++
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 56a4d0d20a267..bedb9d85f3d65 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2279,10 +2279,7 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb,
 						    payload[7]);
 	}
 
-	/*
-	 * Initialize skb->priority for QoS frames. This is put in the TID field
-	 * of the frame before passing it to the driver.
-	 */
+	/* Initialize skb->priority for QoS frames */
 	if (ieee80211_is_data_qos(hdr->frame_control)) {
 		u8 *p = ieee80211_get_qos_ctl(hdr);
 		skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 2fb99325135a0..b74cd9bd5f95e 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -249,6 +249,14 @@ void ieee80211_set_qos_hdr(struct ieee80211_sub_if_data *sdata,
 
 	p = ieee80211_get_qos_ctl(hdr);
 
+	/* don't overwrite the QoS field of injected frames */
+	if (info->flags & IEEE80211_TX_CTL_INJECTED) {
+		/* do take into account Ack policy of injected frames */
+		if (*p & IEEE80211_QOS_CTL_ACK_POLICY_NOACK)
+			info->flags |= IEEE80211_TX_CTL_NO_ACK;
+		return;
+	}
+
 	/* set up the first byte */
 
 	/*
-- 
2.27.0

[PATCH AUTOSEL 5.10 049/217] ath10k: fix compilation warning

[Sasha Levin]

From: Tamizh Chelvam <tamizhr@codeaurora.org>

[ Upstream commit b9162645117841978a3fb31546409271e007dd28 ]

This change fixes below compilation warning.

smatch warnings:
 drivers/net/wireless/ath/ath10k/mac.c:9125 ath10k_mac_op_set_tid_config() error: uninitialized symbol 'ret'.

No functional changes. Compile tested only.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1604507837-29361-1-git-send-email-tamizhr@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2e3eb5bbe49c8..d62b9edd60666 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -9169,10 +9169,11 @@ static int ath10k_mac_op_set_tid_config(struct ieee80211_hw *hw,
 			goto exit;
 	}
 
+	ret = 0;
+
 	if (sta)
 		goto exit;
 
-	ret = 0;
 	arvif->tids_rst = 0;
 	data.curr_vif = vif;
 	data.ar = ar;
-- 
2.27.0

[PATCH AUTOSEL 5.10 050/217] rsi: Fix TX EAPOL packet handling against iwlwifi AP

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 65277100caa2f2c62b6f3c4648b90d6f0435f3bc ]

In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in AP mode,
the association fails. The former is using wpa_supplicant during association,
the later is set up using hostapd:

iwl$ cat hostapd.conf
interface=wlp1s0
ssid=test
country_code=DE
hw_mode=g
channel=1
wpa=2
wpa_passphrase=test
wpa_key_mgmt=WPA-PSK
iwl$ hostapd -d hostapd.conf

rsi$ wpa_supplicant -i wlan0 -c <(wpa_passphrase test test)

The problem is that the TX EAPOL data descriptor RSI_DESC_REQUIRE_CFM_TO_HOST
flag and extended descriptor EAPOL4_CONFIRM frame type are not set in case the
AP is iwlwifi, because in that case the TX EAPOL packet is 2 bytes shorter.

The downstream vendor driver has this change in place already [1], however
there is no explanation for it, neither is there any commit history from which
such explanation could be obtained.

[1] https://github.com/SiliconLabs/RS911X-nLink-OSD/blob/master/rsi/rsi_91x_hal.c#L238

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201015111616.429220-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_hal.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_hal.c b/drivers/net/wireless/rsi/rsi_91x_hal.c
index 3f7e3cfb6f00d..ce9892152f4d4 100644
--- a/drivers/net/wireless/rsi/rsi_91x_hal.c
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -248,7 +248,8 @@ int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb)
 			rsi_set_len_qno(&data_desc->len_qno,
 					(skb->len - FRAME_DESC_SZ),
 					RSI_WIFI_MGMT_Q);
-		if ((skb->len - header_size) == EAPOL4_PACKET_LEN) {
+		if (((skb->len - header_size) == EAPOL4_PACKET_LEN) ||
+		    ((skb->len - header_size) == EAPOL4_PACKET_LEN - 2)) {
 			data_desc->misc_flags |=
 				RSI_DESC_REQUIRE_CFM_TO_HOST;
 			xtend_desc->confirm_frame_type = EAPOL4_CONFIRM;
-- 
2.27.0

[PATCH AUTOSEL 5.10 059/217] Bluetooth: Resume advertising after LE connection

[Sasha Levin]

From: Daniel Winkler <danielwinkler@google.com>

[ Upstream commit 2943d8ede38310db932eb38f91aa1094b471058c ]

When an LE connection request is made, advertising is disabled and never
resumed. When a client has an active advertisement, this is disruptive.
This change adds resume logic for client-configured (non-directed)
advertisements after the connection attempt.

The patch was tested by registering an advertisement, initiating an LE
connection from a remote peer, and verifying that the advertisement is
re-activated after the connection is established. This is performed on
Hatch and Kukui Chromebooks.

Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_conn.c    | 12 ++++++++++--
 net/bluetooth/hci_request.c | 21 ++++++++++++++++-----
 net/bluetooth/hci_request.h |  2 ++
 3 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index d0c1024bf6008..4f1cd8063e720 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -758,6 +758,9 @@ static void create_le_conn_complete(struct hci_dev *hdev, u8 status, u16 opcode)
 
 	conn = hci_lookup_le_connect(hdev);
 
+	if (hdev->adv_instance_cnt)
+		hci_req_resume_adv_instances(hdev);
+
 	if (!status) {
 		hci_connect_le_scan_cleanup(conn);
 		goto done;
@@ -1067,10 +1070,11 @@ struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
 	 * connections most controllers will refuse to connect if
 	 * advertising is enabled, and for slave role connections we
 	 * anyway have to disable it in order to start directed
-	 * advertising.
+	 * advertising. Any registered advertisements will be
+	 * re-enabled after the connection attempt is finished.
 	 */
 	if (hci_dev_test_flag(hdev, HCI_LE_ADV))
-		 __hci_req_disable_advertising(&req);
+		__hci_req_pause_adv_instances(&req);
 
 	/* If requested to connect as slave use directed advertising */
 	if (conn->role == HCI_ROLE_SLAVE) {
@@ -1118,6 +1122,10 @@ struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
 	err = hci_req_run(&req, create_le_conn_complete);
 	if (err) {
 		hci_conn_del(conn);
+
+		if (hdev->adv_instance_cnt)
+			hci_req_resume_adv_instances(hdev);
+
 		return ERR_PTR(err);
 	}
 
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index 6f12bab4d2fa6..fdc6eccef9d10 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -1123,9 +1123,9 @@ static void cancel_adv_timeout(struct hci_dev *hdev)
 }
 
 /* This function requires the caller holds hdev->lock */
-static void hci_suspend_adv_instances(struct hci_request *req)
+void __hci_req_pause_adv_instances(struct hci_request *req)
 {
-	bt_dev_dbg(req->hdev, "Suspending advertising instances");
+	bt_dev_dbg(req->hdev, "Pausing advertising instances");
 
 	/* Call to disable any advertisements active on the controller.
 	 * This will succeed even if no advertisements are configured.
@@ -1138,7 +1138,7 @@ static void hci_suspend_adv_instances(struct hci_request *req)
 }
 
 /* This function requires the caller holds hdev->lock */
-static void hci_resume_adv_instances(struct hci_request *req)
+static void __hci_req_resume_adv_instances(struct hci_request *req)
 {
 	struct adv_info *adv;
 
@@ -1161,6 +1161,17 @@ static void hci_resume_adv_instances(struct hci_request *req)
 	}
 }
 
+/* This function requires the caller holds hdev->lock */
+int hci_req_resume_adv_instances(struct hci_dev *hdev)
+{
+	struct hci_request req;
+
+	hci_req_init(&req, hdev);
+	__hci_req_resume_adv_instances(&req);
+
+	return hci_req_run(&req, NULL);
+}
+
 static void suspend_req_complete(struct hci_dev *hdev, u8 status, u16 opcode)
 {
 	bt_dev_dbg(hdev, "Request complete opcode=0x%x, status=0x%x", opcode,
@@ -1214,7 +1225,7 @@ void hci_req_prepare_suspend(struct hci_dev *hdev, enum suspended_state next)
 
 		/* Pause other advertisements */
 		if (hdev->adv_instance_cnt)
-			hci_suspend_adv_instances(&req);
+			__hci_req_pause_adv_instances(&req);
 
 		hdev->advertising_paused = true;
 		hdev->advertising_old_state = old_state;
@@ -1279,7 +1290,7 @@ void hci_req_prepare_suspend(struct hci_dev *hdev, enum suspended_state next)
 
 		/* Resume other advertisements */
 		if (hdev->adv_instance_cnt)
-			hci_resume_adv_instances(&req);
+			__hci_req_resume_adv_instances(&req);
 
 		/* Unpause discovery */
 		hdev->discovery_paused = false;
diff --git a/net/bluetooth/hci_request.h b/net/bluetooth/hci_request.h
index 6a12e84c66c40..39ee8a18087a2 100644
--- a/net/bluetooth/hci_request.h
+++ b/net/bluetooth/hci_request.h
@@ -71,6 +71,8 @@ void hci_req_add_le_passive_scan(struct hci_request *req);
 void hci_req_prepare_suspend(struct hci_dev *hdev, enum suspended_state next);
 
 void hci_req_disable_address_resolution(struct hci_dev *hdev);
+void __hci_req_pause_adv_instances(struct hci_request *req);
+int hci_req_resume_adv_instances(struct hci_dev *hdev);
 void hci_req_reenable_advertising(struct hci_dev *hdev);
 void __hci_req_enable_advertising(struct hci_request *req);
 void __hci_req_disable_advertising(struct hci_request *req);
-- 
2.27.0

[PATCH AUTOSEL 5.10 060/217] Bluetooth: Move force_bredr_smp debugfs into hci_debugfs_create_bredr

[Sasha Levin]

From: Claire Chang <tientzu@chromium.org>

[ Upstream commit 82493316507a720b6faa2ec23971c0ca89c6dcb0 ]

Avoid multiple attempts to create the debugfs entry, force_bredr_smp,
by moving it from the SMP registration to the BR/EDR controller init
section. hci_debugfs_create_bredr is only called when HCI_SETUP and
HCI_CONFIG is not set.

Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_debugfs.c | 50 +++++++++++++++++++++++++++++++++++++
 net/bluetooth/smp.c         | 44 ++------------------------------
 net/bluetooth/smp.h         |  2 ++
 3 files changed, 54 insertions(+), 42 deletions(-)

diff --git a/net/bluetooth/hci_debugfs.c b/net/bluetooth/hci_debugfs.c
index 5e8af2658e44a..4626e0289a970 100644
--- a/net/bluetooth/hci_debugfs.c
+++ b/net/bluetooth/hci_debugfs.c
@@ -494,6 +494,45 @@ static int auto_accept_delay_get(void *data, u64 *val)
 DEFINE_SIMPLE_ATTRIBUTE(auto_accept_delay_fops, auto_accept_delay_get,
 			auto_accept_delay_set, "%llu\n");
 
+static ssize_t force_bredr_smp_read(struct file *file,
+				    char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct hci_dev *hdev = file->private_data;
+	char buf[3];
+
+	buf[0] = hci_dev_test_flag(hdev, HCI_FORCE_BREDR_SMP) ? 'Y' : 'N';
+	buf[1] = '\n';
+	buf[2] = '\0';
+	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+}
+
+static ssize_t force_bredr_smp_write(struct file *file,
+				     const char __user *user_buf,
+				     size_t count, loff_t *ppos)
+{
+	struct hci_dev *hdev = file->private_data;
+	bool enable;
+	int err;
+
+	err = kstrtobool_from_user(user_buf, count, &enable);
+	if (err)
+		return err;
+
+	err = smp_force_bredr(hdev, enable);
+	if (err)
+		return err;
+
+	return count;
+}
+
+static const struct file_operations force_bredr_smp_fops = {
+	.open		= simple_open,
+	.read		= force_bredr_smp_read,
+	.write		= force_bredr_smp_write,
+	.llseek		= default_llseek,
+};
+
 static int idle_timeout_set(void *data, u64 val)
 {
 	struct hci_dev *hdev = data;
@@ -589,6 +628,17 @@ void hci_debugfs_create_bredr(struct hci_dev *hdev)
 	debugfs_create_file("voice_setting", 0444, hdev->debugfs, hdev,
 			    &voice_setting_fops);
 
+	/* If the controller does not support BR/EDR Secure Connections
+	 * feature, then the BR/EDR SMP channel shall not be present.
+	 *
+	 * To test this with Bluetooth 4.0 controllers, create a debugfs
+	 * switch that allows forcing BR/EDR SMP support and accepting
+	 * cross-transport pairing on non-AES encrypted connections.
+	 */
+	if (!lmp_sc_capable(hdev))
+		debugfs_create_file("force_bredr_smp", 0644, hdev->debugfs,
+				    hdev, &force_bredr_smp_fops);
+
 	if (lmp_ssp_capable(hdev)) {
 		debugfs_create_file("ssp_debug_mode", 0444, hdev->debugfs,
 				    hdev, &ssp_debug_mode_fops);
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index bf4bef13d9354..c659c464f7ca0 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -3353,31 +3353,8 @@ static void smp_del_chan(struct l2cap_chan *chan)
 	l2cap_chan_put(chan);
 }
 
-static ssize_t force_bredr_smp_read(struct file *file,
-				    char __user *user_buf,
-				    size_t count, loff_t *ppos)
+int smp_force_bredr(struct hci_dev *hdev, bool enable)
 {
-	struct hci_dev *hdev = file->private_data;
-	char buf[3];
-
-	buf[0] = hci_dev_test_flag(hdev, HCI_FORCE_BREDR_SMP) ? 'Y': 'N';
-	buf[1] = '\n';
-	buf[2] = '\0';
-	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
-}
-
-static ssize_t force_bredr_smp_write(struct file *file,
-				     const char __user *user_buf,
-				     size_t count, loff_t *ppos)
-{
-	struct hci_dev *hdev = file->private_data;
-	bool enable;
-	int err;
-
-	err = kstrtobool_from_user(user_buf, count, &enable);
-	if (err)
-		return err;
-
 	if (enable == hci_dev_test_flag(hdev, HCI_FORCE_BREDR_SMP))
 		return -EALREADY;
 
@@ -3399,16 +3376,9 @@ static ssize_t force_bredr_smp_write(struct file *file,
 
 	hci_dev_change_flag(hdev, HCI_FORCE_BREDR_SMP);
 
-	return count;
+	return 0;
 }
 
-static const struct file_operations force_bredr_smp_fops = {
-	.open		= simple_open,
-	.read		= force_bredr_smp_read,
-	.write		= force_bredr_smp_write,
-	.llseek		= default_llseek,
-};
-
 int smp_register(struct hci_dev *hdev)
 {
 	struct l2cap_chan *chan;
@@ -3433,17 +3403,7 @@ int smp_register(struct hci_dev *hdev)
 
 	hdev->smp_data = chan;
 
-	/* If the controller does not support BR/EDR Secure Connections
-	 * feature, then the BR/EDR SMP channel shall not be present.
-	 *
-	 * To test this with Bluetooth 4.0 controllers, create a debugfs
-	 * switch that allows forcing BR/EDR SMP support and accepting
-	 * cross-transport pairing on non-AES encrypted connections.
-	 */
 	if (!lmp_sc_capable(hdev)) {
-		debugfs_create_file("force_bredr_smp", 0644, hdev->debugfs,
-				    hdev, &force_bredr_smp_fops);
-
 		/* Flag can be already set here (due to power toggle) */
 		if (!hci_dev_test_flag(hdev, HCI_FORCE_BREDR_SMP))
 			return 0;
diff --git a/net/bluetooth/smp.h b/net/bluetooth/smp.h
index 121edadd5f8da..fc35a8bf358e8 100644
--- a/net/bluetooth/smp.h
+++ b/net/bluetooth/smp.h
@@ -193,6 +193,8 @@ bool smp_irk_matches(struct hci_dev *hdev, const u8 irk[16],
 int smp_generate_rpa(struct hci_dev *hdev, const u8 irk[16], bdaddr_t *rpa);
 int smp_generate_oob(struct hci_dev *hdev, u8 hash[16], u8 rand[16]);
 
+int smp_force_bredr(struct hci_dev *hdev, bool enable);
+
 int smp_register(struct hci_dev *hdev);
 void smp_unregister(struct hci_dev *hdev);
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 061/217] Bluetooth: hidp: use correct wait queue when removing ctrl_wait

[Sasha Levin]

From: Ole Bjørn Midtbø <omidtbo@cisco.com>

[ Upstream commit cca342d98bef68151a80b024f7bf5f388d1fbdea ]

A different wait queue was used when removing ctrl_wait than when adding
it. This effectively made the remove operation without locking compared
to other operations on the wait queue ctrl_wait was part of. This caused
issues like below where dead000000000100 is LIST_POISON1 and
dead000000000200 is LIST_POISON2.

 list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \
	but was dead000000000200. (next=ffffffc03ac77de0).
 ------------[ cut here ]------------
 CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G           O    4.4.238+ #9
 ...
 ---[ end trace 0adc2158f0646eac ]---
 Call trace:
 [<ffffffc000443f78>] __list_add+0x38/0xb0
 [<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68
 [<ffffffc00020eecc>] __pollwait+0xec/0x100
 [<ffffffc000d1556c>] bt_sock_poll+0x74/0x200
 [<ffffffc000bdb8a8>] sock_poll+0x110/0x128
 [<ffffffc000210378>] do_sys_poll+0x220/0x480
 [<ffffffc0002106f0>] SyS_poll+0x80/0x138
 [<ffffffc00008510c>] __sys_trace_return+0x0/0x4

 Unable to handle kernel paging request at virtual address dead000000000100
 ...
 CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G        W  O    4.4.238+ #9
 ...
 Call trace:
  [<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8
  [<ffffffc0000f0818>] __wake_up+0x50/0x70
  [<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60
  [<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224
  [<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298
  [<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198
  [<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78
  [<ffffffc000d29934>] hci_event_packet+0x564/0x2e30
  [<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360
  [<ffffffc0000c2218>] process_one_work+0x268/0x460
  [<ffffffc0000c2678>] worker_thread+0x268/0x480
  [<ffffffc0000c94e0>] kthread+0x118/0x128
  [<ffffffc000085070>] ret_from_fork+0x10/0x20
  ---[ end trace 0adc2158f0646ead ]---

Signed-off-by: Ole Bjørn Midtbø <omidtbo@cisco.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hidp/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index 3b4fa27a44e64..0db48c8126623 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -1290,7 +1290,7 @@ static int hidp_session_thread(void *arg)
 
 	/* cleanup runtime environment */
 	remove_wait_queue(sk_sleep(session->intr_sock->sk), &intr_wait);
-	remove_wait_queue(sk_sleep(session->intr_sock->sk), &ctrl_wait);
+	remove_wait_queue(sk_sleep(session->ctrl_sock->sk), &ctrl_wait);
 	wake_up_interruptible(&session->report_queue);
 	hidp_del_timer(session);
 
-- 
2.27.0

[PATCH AUTOSEL 5.10 063/217] net: skb_vlan_untag(): don't reset transport offset if set by GRO layer

[Sasha Levin]

From: Alexander Lobakin <alobakin@pm.me>

[ Upstream commit 8be33ecfc1ffd2da20cc29e957e4cb6eb99310cb ]

Similar to commit fda55eca5a33f
("net: introduce skb_transport_header_was_set()"), avoid resetting
transport offsets that were already set by GRO layer. This not only
mirrors the behavior of __netif_receive_skb_core(), but also makes
sense when it comes to UDP GSO fraglists forwarding: transport offset
of such skbs is set only once by GRO receive callback and remains
untouched and correct up to the xmitting driver in 1:1 case, but
becomes junk after untagging in ingress VLAN case and breaks UDP
GSO offload. This does not happen after this change, and all types
of forwarding of UDP GSO fraglists work as expected.

Since v1 [1]:
 - keep the code 1:1 with __netif_receive_skb_core() (Jakub).

[1] https://lore.kernel.org/netdev/zYurwsZRN7BkqSoikWQLVqHyxz18h4LhHU4NFa2Vw@cp4-web-038.plabs.ch

Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Link: https://lore.kernel.org/r/7JgIkgEztzt0W6ZtC9V9Cnk5qfkrUFYcpN871syCi8@cp4-web-040.plabs.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index e578544b2cc71..08d69e062eca6 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -5430,7 +5430,8 @@ struct sk_buff *skb_vlan_untag(struct sk_buff *skb)
 		goto err_free;
 
 	skb_reset_network_header(skb);
-	skb_reset_transport_header(skb);
+	if (!skb_transport_header_was_set(skb))
+		skb_reset_transport_header(skb);
 	skb_reset_mac_len(skb);
 
 	return skb;
-- 
2.27.0

[PATCH AUTOSEL 5.10 067/217] mwifiex: pcie: skip cancel_work_sync() on reset failure path

[Sasha Levin]

From: Tsuchiya Yuto <kitakar@gmail.com>

[ Upstream commit 4add4d988f95f47493500a7a19c623827061589b ]

If a reset is performed, but even the reset fails for some reasons (e.g.,
on Surface devices, the fw reset requires another quirks),
cancel_work_sync() hangs in mwifiex_cleanup_pcie().

    # firmware went into a bad state
    [...]
    [ 1608.281690] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex...
    [ 1608.282724] mwifiex_pcie 0000:03:00.0: rx_pending=0, tx_pending=1,	cmd_pending=0
    [ 1608.292400] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    [ 1608.292405] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    # reset performed after firmware went into a bad state
    [ 1609.394320] mwifiex_pcie 0000:03:00.0: WLAN FW already running! Skip FW dnld
    [ 1609.394335] mwifiex_pcie 0000:03:00.0: WLAN FW is active
    # but even the reset failed
    [ 1619.499049] mwifiex_pcie 0000:03:00.0: mwifiex_cmd_timeout_func: Timeout cmd id = 0xfa, act = 0xe000
    [ 1619.499094] mwifiex_pcie 0000:03:00.0: num_data_h2c_failure = 0
    [ 1619.499103] mwifiex_pcie 0000:03:00.0: num_cmd_h2c_failure = 0
    [ 1619.499110] mwifiex_pcie 0000:03:00.0: is_cmd_timedout = 1
    [ 1619.499117] mwifiex_pcie 0000:03:00.0: num_tx_timeout = 0
    [ 1619.499124] mwifiex_pcie 0000:03:00.0: last_cmd_index = 0
    [ 1619.499133] mwifiex_pcie 0000:03:00.0: last_cmd_id: fa 00 07 01 07 01 07 01 07 01
    [ 1619.499140] mwifiex_pcie 0000:03:00.0: last_cmd_act: 00 e0 00 00 00 00 00 00 00 00
    [ 1619.499147] mwifiex_pcie 0000:03:00.0: last_cmd_resp_index = 3
    [ 1619.499155] mwifiex_pcie 0000:03:00.0: last_cmd_resp_id: 07 81 07 81 07 81 07 81 07 81
    [ 1619.499162] mwifiex_pcie 0000:03:00.0: last_event_index = 2
    [ 1619.499169] mwifiex_pcie 0000:03:00.0: last_event: 58 00 58 00 58 00 58 00 58 00
    [ 1619.499177] mwifiex_pcie 0000:03:00.0: data_sent=0 cmd_sent=1
    [ 1619.499185] mwifiex_pcie 0000:03:00.0: ps_mode=0 ps_state=0
    [ 1619.499215] mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device
    # mwifiex_pcie_work hang happening
    [ 1823.233923] INFO: task kworker/3:1:44 blocked for more than 122 seconds.
    [ 1823.233932]       Tainted: G        WC OE     5.10.0-rc1-1-mainline #1
    [ 1823.233935] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    [ 1823.233940] task:kworker/3:1     state:D stack:    0 pid:   44 ppid:     2 flags:0x00004000
    [ 1823.233960] Workqueue: events mwifiex_pcie_work [mwifiex_pcie]
    [ 1823.233965] Call Trace:
    [ 1823.233981]  __schedule+0x292/0x820
    [ 1823.233990]  schedule+0x45/0xe0
    [ 1823.233995]  schedule_timeout+0x11c/0x160
    [ 1823.234003]  wait_for_completion+0x9e/0x100
    [ 1823.234012]  __flush_work.isra.0+0x156/0x210
    [ 1823.234018]  ? flush_workqueue_prep_pwqs+0x130/0x130
    [ 1823.234026]  __cancel_work_timer+0x11e/0x1a0
    [ 1823.234035]  mwifiex_cleanup_pcie+0x28/0xd0 [mwifiex_pcie]
    [ 1823.234049]  mwifiex_free_adapter+0x24/0xe0 [mwifiex]
    [ 1823.234060]  _mwifiex_fw_dpc+0x294/0x560 [mwifiex]
    [ 1823.234074]  mwifiex_reinit_sw+0x15d/0x300 [mwifiex]
    [ 1823.234080]  mwifiex_pcie_reset_done+0x50/0x80 [mwifiex_pcie]
    [ 1823.234087]  pci_try_reset_function+0x5c/0x90
    [ 1823.234094]  process_one_work+0x1d6/0x3a0
    [ 1823.234100]  worker_thread+0x4d/0x3d0
    [ 1823.234107]  ? rescuer_thread+0x410/0x410
    [ 1823.234112]  kthread+0x142/0x160
    [ 1823.234117]  ? __kthread_bind_mask+0x60/0x60
    [ 1823.234124]  ret_from_fork+0x22/0x30
    [...]

This is a deadlock caused by calling cancel_work_sync() in
mwifiex_cleanup_pcie():

- Device resets are done via mwifiex_pcie_card_reset()
- which schedules card->work to call mwifiex_pcie_card_reset_work()
- which calls pci_try_reset_function().
- This leads to mwifiex_pcie_reset_done() be called on the same workqueue,
  which in turn calls
- mwifiex_reinit_sw() and that calls
- _mwifiex_fw_dpc().

The problem is now that _mwifiex_fw_dpc() calls mwifiex_free_adapter()
in case firmware initialization fails. That ends up calling
mwifiex_cleanup_pcie().

Note that all those calls are still running on the workqueue. So when
mwifiex_cleanup_pcie() now calls cancel_work_sync(), it's really waiting
on itself to complete, causing a deadlock.

This commit fixes the deadlock by skipping cancel_work_sync() on a reset
failure path.

After this commit, when reset fails, the following output is
expected to be shown:

    kernel: mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device
    kernel: mwifiex: Failed to bring up adapter: -5
    kernel: mwifiex_pcie 0000:03:00.0: reinit failed: -5

To reproduce this issue, for example, try putting the root port of wifi
into D3 (replace "00:1d.3" with your setup).

    # put into D3 (root port)
    sudo setpci -v -s 00:1d.3 CAP_PM+4.b=0b

Cc: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201028142346.18355-1-kitakar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/pcie.c | 18 +++++++++++++++++-
 drivers/net/wireless/marvell/mwifiex/pcie.h |  2 ++
 2 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 6a10ff0377a24..33cf952cc01d3 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -526,6 +526,8 @@ static void mwifiex_pcie_reset_prepare(struct pci_dev *pdev)
 	clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags);
 	clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags);
 	mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
+
+	card->pci_reset_ongoing = true;
 }
 
 /*
@@ -554,6 +556,8 @@ static void mwifiex_pcie_reset_done(struct pci_dev *pdev)
 		dev_err(&pdev->dev, "reinit failed: %d\n", ret);
 	else
 		mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
+
+	card->pci_reset_ongoing = false;
 }
 
 static const struct pci_error_handlers mwifiex_pcie_err_handler = {
@@ -3142,7 +3146,19 @@ static void mwifiex_cleanup_pcie(struct mwifiex_adapter *adapter)
 	int ret;
 	u32 fw_status;
 
-	cancel_work_sync(&card->work);
+	/* Perform the cancel_work_sync() only when we're not resetting
+	 * the card. It's because that function never returns if we're
+	 * in reset path. If we're here when resetting the card, it means
+	 * that we failed to reset the card (reset failure path).
+	 */
+	if (!card->pci_reset_ongoing) {
+		mwifiex_dbg(adapter, MSG, "performing cancel_work_sync()...\n");
+		cancel_work_sync(&card->work);
+		mwifiex_dbg(adapter, MSG, "cancel_work_sync() done\n");
+	} else {
+		mwifiex_dbg(adapter, MSG,
+			    "skipped cancel_work_sync() because we're in card reset failure path\n");
+	}
 
 	ret = mwifiex_read_reg(adapter, reg->fw_status, &fw_status);
 	if (fw_status == FIRMWARE_READY_PCIE) {
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.h b/drivers/net/wireless/marvell/mwifiex/pcie.h
index 843d57eda8201..5ed613d657094 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.h
@@ -242,6 +242,8 @@ struct pcie_service_card {
 	struct mwifiex_msix_context share_irq_ctx;
 	struct work_struct work;
 	unsigned long work_flags;
+
+	bool pci_reset_ongoing;
 };
 
 static inline int
-- 
2.27.0

[PATCH AUTOSEL 5.10 073/217] net: ipconfig: Avoid spurious blank lines in boot log

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit c9f64d1fc101c64ea2be1b2e562b4395127befc9 ]

When dumping the name and NTP servers advertised by DHCP, a blank line
is emitted if either of the lists is empty. This can lead to confusing
issues such as the blank line getting flagged as warning. This happens
because the blank line is the result of pr_cont("\n") and that may see
its level corrupted by some other driver concurrently writing to the
console.

Fix this by making sure that the terminating newline is only emitted
if at least one entry in the lists was printed before.

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201110073757.1284594-1-thierry.reding@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ipconfig.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 561f15b5a944e..3cd13e1bc6a70 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -1441,7 +1441,7 @@ static int __init ip_auto_config(void)
 	int retries = CONF_OPEN_RETRIES;
 #endif
 	int err;
-	unsigned int i;
+	unsigned int i, count;
 
 	/* Initialise all name servers and NTP servers to NONE (but only if the
 	 * "ip=" or "nfsaddrs=" kernel command line parameters weren't decoded,
@@ -1575,7 +1575,7 @@ static int __init ip_auto_config(void)
 	if (ic_dev_mtu)
 		pr_cont(", mtu=%d", ic_dev_mtu);
 	/* Name servers (if any): */
-	for (i = 0; i < CONF_NAMESERVERS_MAX; i++) {
+	for (i = 0, count = 0; i < CONF_NAMESERVERS_MAX; i++) {
 		if (ic_nameservers[i] != NONE) {
 			if (i == 0)
 				pr_info("     nameserver%u=%pI4",
@@ -1583,12 +1583,14 @@ static int __init ip_auto_config(void)
 			else
 				pr_cont(", nameserver%u=%pI4",
 					i, &ic_nameservers[i]);
+
+			count++;
 		}
-		if (i + 1 == CONF_NAMESERVERS_MAX)
+		if ((i + 1 == CONF_NAMESERVERS_MAX) && count > 0)
 			pr_cont("\n");
 	}
 	/* NTP servers (if any): */
-	for (i = 0; i < CONF_NTP_SERVERS_MAX; i++) {
+	for (i = 0, count = 0; i < CONF_NTP_SERVERS_MAX; i++) {
 		if (ic_ntp_servers[i] != NONE) {
 			if (i == 0)
 				pr_info("     ntpserver%u=%pI4",
@@ -1596,8 +1598,10 @@ static int __init ip_auto_config(void)
 			else
 				pr_cont(", ntpserver%u=%pI4",
 					i, &ic_ntp_servers[i]);
+
+			count++;
 		}
-		if (i + 1 == CONF_NTP_SERVERS_MAX)
+		if ((i + 1 == CONF_NTP_SERVERS_MAX) && count > 0)
 			pr_cont("\n");
 	}
 #endif /* !SILENT */
-- 
2.27.0

[PATCH AUTOSEL 5.10 077/217] r8169: use READ_ONCE in rtl_tx_slots_avail

[Sasha Levin]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 95f3c5458dfa5856bb110e31d156e00d894d0134 ]

tp->dirty_tx and tp->cur_tx may be changed by a racing rtl_tx() or
rtl8169_start_xmit(). Use READ_ONCE() to annotate the races and ensure
that the compiler doesn't use cached values.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/5676fee3-f6b4-84f2-eba5-c64949a371ad@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 85d9c3e30c699..67918feed307e 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4173,7 +4173,8 @@ static bool rtl8169_tso_csum_v2(struct rtl8169_private *tp,
 static bool rtl_tx_slots_avail(struct rtl8169_private *tp,
 			       unsigned int nr_frags)
 {
-	unsigned int slots_avail = tp->dirty_tx + NUM_TX_DESC - tp->cur_tx;
+	unsigned int slots_avail = READ_ONCE(tp->dirty_tx) + NUM_TX_DESC
+					- READ_ONCE(tp->cur_tx);
 
 	/* A skbuff with nr_frags needs nr_frags+1 entries in the tx queue */
 	return slots_avail > nr_frags;
-- 
2.27.0

Re: [PATCH AUTOSEL 5.10 050/217] rsi: Fix TX EAPOL packet handling against iwlwifi AP

[Marek Vasut]

On 12/23/20 3:13 AM, Sasha Levin wrote:

Hello Sasha,

> From: Marek Vasut <marex@denx.de>
> 
> [ Upstream commit 65277100caa2f2c62b6f3c4648b90d6f0435f3bc ]
> 
> In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in AP mode,
> the association fails. The former is using wpa_supplicant during association,
> the later is set up using hostapd:

[...]

Was this patch possibly missed from 5.10.y ?

Also, while at it, I think it might make sense to pick the following two 
patches as well, they dramatically reduce interrupt rate of the RSI WiFi 
device, so it stops overloading lower-end devices:
287431463e786 ("rsi: Move card interrupt handling to RX thread")
abd131a19f6b8 ("rsi: Clean up loop in the interrupt handler")

Re: [PATCH AUTOSEL 5.10 050/217] rsi: Fix TX EAPOL packet handling against iwlwifi AP

[Sasha Levin]

On Tue, Mar 02, 2021 at 08:25:49PM +0100, Marek Vasut wrote:
>On 12/23/20 3:13 AM, Sasha Levin wrote:
>
>Hello Sasha,
>
>>From: Marek Vasut <marex@denx.de>
>>
>>[ Upstream commit 65277100caa2f2c62b6f3c4648b90d6f0435f3bc ]
>>
>>In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in AP mode,
>>the association fails. The former is using wpa_supplicant during association,
>>the later is set up using hostapd:
>
>[...]
>
>Was this patch possibly missed from 5.10.y ?

I'm not sure what happened there, but I can queue it up.

>Also, while at it, I think it might make sense to pick the following 
>two patches as well, they dramatically reduce interrupt rate of the 
>RSI WiFi device, so it stops overloading lower-end devices:
>287431463e786 ("rsi: Move card interrupt handling to RX thread")

And this one too.

>abd131a19f6b8 ("rsi: Clean up loop in the interrupt handler")

But not this one, it looks like just a cleanup. Why is it needed?

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 5.10 050/217] rsi: Fix TX EAPOL packet handling against iwlwifi AP

[Marek Vasut]

On 3/4/21 9:47 PM, Sasha Levin wrote:
> On Tue, Mar 02, 2021 at 08:25:49PM +0100, Marek Vasut wrote:
>> On 12/23/20 3:13 AM, Sasha Levin wrote:
>>
>> Hello Sasha,
>>
>>> From: Marek Vasut <marex@denx.de>
>>>
>>> [ Upstream commit 65277100caa2f2c62b6f3c4648b90d6f0435f3bc ]
>>>
>>> In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in 
>>> AP mode,
>>> the association fails. The former is using wpa_supplicant during 
>>> association,
>>> the later is set up using hostapd:
>>
>> [...]
>>
>> Was this patch possibly missed from 5.10.y ?
> 
> I'm not sure what happened there, but I can queue it up.

Thank you

>> Also, while at it, I think it might make sense to pick the following 
>> two patches as well, they dramatically reduce interrupt rate of the 
>> RSI WiFi device, so it stops overloading lower-end devices:
>> 287431463e786 ("rsi: Move card interrupt handling to RX thread")
> 
> And this one too.

Thanks

>> abd131a19f6b8 ("rsi: Clean up loop in the interrupt handler")
> 
> But not this one, it looks like just a cleanup. Why is it needed?

Now I got confused, yes, please skip abd131a19f6b8, thanks for spotting 
it. (I still have one more patch for the RSI wifi which I need to send 
out, but that's for later)