[PATCH v2 net-next 0/4] net: ipa: remove a build dependency

[PATCH v2 net-next 0/4] net: ipa: remove a build dependency

[Alex Elder]

Rob, for some reason I can't find in my mailbox your report that
the binding caused a problem.  I only discovered it when looking
into why the series was not accepted yet.

Version 2 includes <.../arm-gic.h> rather than <.../irq.h> in the
example section of the binding, to ensure GIC_SPI is defined.
I verified this passes "make dt_bindings_check".

The rest of the series is unchanged.  Below is the original cover
letter.

---

Unlike the original (temporary) IPA notification mechanism, the
generic remoteproc SSR notification code does not require the IPA
driver to maintain a pointer to the modem subsystem remoteproc
structure.

The IPA driver was converted to use the newer SSR notifiers, but the
specification and use of a phandle for the modem subsystem was never
removed.

This series removes the lookup of the remoteproc pointer, and that
removes the need for the modem DT property.  It also removes the
reference to the "modem-remoteproc" property from the DT binding,
and from the DT files that specified them.

David/Jakub, please take these all through net-next if they are
acceptable to you, once Rob has acked the binding and DT patches.

Thanks.

					-Alex


Alex Elder (4):
  net: ipa: remove a remoteproc dependency
  dt-bindings: net: remove modem-remoteproc property
  arm64: dts: qcom: sc7180: kill IPA modem-remoteproc property
  arm64: dts: qcom: sdm845: kill IPA modem-remoteproc property

 .../devicetree/bindings/net/qcom,ipa.yaml     | 15 ++------
 arch/arm64/boot/dts/qcom/sc7180.dtsi          |  2 -
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |  2 -
 drivers/net/ipa/ipa.h                         |  2 -
 drivers/net/ipa/ipa_main.c                    | 38 +------------------
 5 files changed, 5 insertions(+), 54 deletions(-)

-- 
2.20.1

[PATCH v2 net-next 1/4] net: ipa: remove a remoteproc dependency

[Alex Elder]

The IPA driver currently requires a DT property to be defined whose
value is the phandle for the modem subsystem.  This was needed to
look up a remoteproc structure pointer used when registering for
notifications in the original IPA notification mechanism.

Remoteproc provides a more generic SSR notifier system, and the IPA
driver switched over to it last summer, but this remoteproc phandle
dependency was not removed at that time.

Get rid of the IPA remoteproc pointer and stop requiring the phandle
be specified.

This avoids a link error (rproc_put() not defined) for certain
configurations.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 30eb3fbee3da7 ("net: ipa: new notification infrastructure")
Signed-off-by: Alex Elder <elder@linaro.org>
---
 drivers/net/ipa/ipa.h      |  2 --
 drivers/net/ipa/ipa_main.c | 38 ++------------------------------------
 2 files changed, 2 insertions(+), 38 deletions(-)

diff --git a/drivers/net/ipa/ipa.h b/drivers/net/ipa/ipa.h
index 6c2371084c55a..c6c6a7f6909c1 100644
--- a/drivers/net/ipa/ipa.h
+++ b/drivers/net/ipa/ipa.h
@@ -43,7 +43,6 @@ enum ipa_flag {
  * @flags:		Boolean state flags
  * @version:		IPA hardware version
  * @pdev:		Platform device
- * @modem_rproc:	Remoteproc handle for modem subsystem
  * @smp2p:		SMP2P information
  * @clock:		IPA clocking information
  * @table_addr:		DMA address of filter/route table content
@@ -83,7 +82,6 @@ struct ipa {
 	DECLARE_BITMAP(flags, IPA_FLAG_COUNT);
 	enum ipa_version version;
 	struct platform_device *pdev;
-	struct rproc *modem_rproc;
 	struct notifier_block nb;
 	void *notifier;
 	struct ipa_smp2p *smp2p;
diff --git a/drivers/net/ipa/ipa_main.c b/drivers/net/ipa/ipa_main.c
index 84bb8ae927252..ab0fd5cb49277 100644
--- a/drivers/net/ipa/ipa_main.c
+++ b/drivers/net/ipa/ipa_main.c
@@ -15,7 +15,6 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
-#include <linux/remoteproc.h>
 #include <linux/qcom_scm.h>
 #include <linux/soc/qcom/mdt_loader.h>
 
@@ -729,19 +728,6 @@ static const struct of_device_id ipa_match[] = {
 };
 MODULE_DEVICE_TABLE(of, ipa_match);
 
-static phandle of_property_read_phandle(const struct device_node *np,
-					const char *name)
-{
-        struct property *prop;
-        int len = 0;
-
-        prop = of_find_property(np, name, &len);
-        if (!prop || len != sizeof(__be32))
-                return 0;
-
-        return be32_to_cpup(prop->value);
-}
-
 /* Check things that can be validated at build time.  This just
  * groups these things BUILD_BUG_ON() calls don't clutter the rest
  * of the code.
@@ -807,10 +793,8 @@ static int ipa_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	const struct ipa_data *data;
 	struct ipa_clock *clock;
-	struct rproc *rproc;
 	bool modem_init;
 	struct ipa *ipa;
-	phandle ph;
 	int ret;
 
 	ipa_validate_build();
@@ -829,25 +813,12 @@ static int ipa_probe(struct platform_device *pdev)
 		if (!qcom_scm_is_available())
 			return -EPROBE_DEFER;
 
-	/* We rely on remoteproc to tell us about modem state changes */
-	ph = of_property_read_phandle(dev->of_node, "modem-remoteproc");
-	if (!ph) {
-		dev_err(dev, "DT missing \"modem-remoteproc\" property\n");
-		return -EINVAL;
-	}
-
-	rproc = rproc_get_by_phandle(ph);
-	if (!rproc)
-		return -EPROBE_DEFER;
-
 	/* The clock and interconnects might not be ready when we're
 	 * probed, so might return -EPROBE_DEFER.
 	 */
 	clock = ipa_clock_init(dev, data->clock_data);
-	if (IS_ERR(clock)) {
-		ret = PTR_ERR(clock);
-		goto err_rproc_put;
-	}
+	if (IS_ERR(clock))
+		return PTR_ERR(clock);
 
 	/* No more EPROBE_DEFER.  Allocate and initialize the IPA structure */
 	ipa = kzalloc(sizeof(*ipa), GFP_KERNEL);
@@ -858,7 +829,6 @@ static int ipa_probe(struct platform_device *pdev)
 
 	ipa->pdev = pdev;
 	dev_set_drvdata(dev, ipa);
-	ipa->modem_rproc = rproc;
 	ipa->clock = clock;
 	ipa->version = data->version;
 
@@ -935,8 +905,6 @@ static int ipa_probe(struct platform_device *pdev)
 	kfree(ipa);
 err_clock_exit:
 	ipa_clock_exit(clock);
-err_rproc_put:
-	rproc_put(rproc);
 
 	return ret;
 }
@@ -944,7 +912,6 @@ static int ipa_probe(struct platform_device *pdev)
 static int ipa_remove(struct platform_device *pdev)
 {
 	struct ipa *ipa = dev_get_drvdata(&pdev->dev);
-	struct rproc *rproc = ipa->modem_rproc;
 	struct ipa_clock *clock = ipa->clock;
 	int ret;
 
@@ -970,7 +937,6 @@ static int ipa_remove(struct platform_device *pdev)
 	ipa_reg_exit(ipa);
 	kfree(ipa);
 	ipa_clock_exit(clock);
-	rproc_put(rproc);
 
 	return 0;
 }
-- 
2.20.1

[PATCH v2 net-next 2/4] dt-bindings: net: remove modem-remoteproc property

[Alex Elder]

The IPA driver uses the remoteproc SSR notifier now, rather than the
temporary IPA notification system used initially.  As a result it no
longer needs a property identifying the modem subsystem DT node.

Use GIC_SPI rather than 0 in the example interrupt definition.

Signed-off-by: Alex Elder <elder@linaro.org>
---
v2: Now include <.../arm-gic.h> instead of <.../irq.h> in example.

 .../devicetree/bindings/net/qcom,ipa.yaml         | 15 +++------------
 1 file changed, 3 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 8a2d12644675b..8f86084bf12e9 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -113,13 +113,6 @@ properties:
       performing early IPA initialization, including loading and
       validating firwmare used by the GSI.
 
-  modem-remoteproc:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description:
-      This defines the phandle to the remoteproc node representing
-      the modem subsystem.  This is requied so the IPA driver can
-      receive and act on notifications of modem up/down events.
-
   memory-region:
     maxItems: 1
     description:
@@ -135,7 +128,6 @@ required:
   - interrupts
   - interconnects
   - qcom,smem-states
-  - modem-remoteproc
 
 oneOf:
   - required:
@@ -147,7 +139,7 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/irq.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
         #include <dt-bindings/clock/qcom,rpmh.h>
         #include <dt-bindings/interconnect/qcom,sdm845.h>
 
@@ -168,7 +160,6 @@ examples:
                 compatible = "qcom,sdm845-ipa";
 
                 modem-init;
-                modem-remoteproc = <&mss_pil>;
 
                 iommus = <&apps_smmu 0x720 0x3>;
                 reg = <0x1e40000 0x7000>,
@@ -178,8 +169,8 @@ examples:
                             "ipa-shared",
                             "gsi";
 
-                interrupts-extended = <&intc 0 311 IRQ_TYPE_EDGE_RISING>,
-                                      <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>,
+                interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+                                      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
                                       <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
                                       <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
                 interrupt-names = "ipa",
-- 
2.20.1

[PATCH v2 net-next 3/4] arm64: dts: qcom: sc7180: kill IPA modem-remoteproc property

[Alex Elder]

The "modem-remoteproc" property is no longer required for the IPA
driver, so get rid of it.

Signed-off-by: Alex Elder <elder@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 22b832fc62e3d..003309f0d3e18 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1434,8 +1434,6 @@
 			qcom,smem-state-names = "ipa-clock-enabled-valid",
 						"ipa-clock-enabled";
 
-			modem-remoteproc = <&remoteproc_mpss>;
-
 			status = "disabled";
 		};
 
-- 
2.20.1

[PATCH v2 net-next 4/4] arm64: dts: qcom: sdm845: kill IPA modem-remoteproc property

[Alex Elder]

The "modem-remoteproc" property is no longer required for the IPA
driver, so get rid of it.

Signed-off-by: Alex Elder <elder@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index bcf888381f144..04b2490eec9f4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2366,8 +2366,6 @@
 			qcom,smem-state-names = "ipa-clock-enabled-valid",
 						"ipa-clock-enabled";
 
-			modem-remoteproc = <&mss_pil>;
-
 			status = "disabled";
 		};
 
-- 
2.20.1