[PATCH AUTOSEL 4.14 4/9] r8152: Add Lenovo Powered USB-C Travel Hub

[PATCH AUTOSEL 4.14 4/9] r8152: Add Lenovo Powered USB-C Travel Hub

[Sasha Levin]

From: Leon Schuermann <leon@is.currently.online>

[ Upstream commit cb82a54904a99df9e8f9e9d282046055dae5a730 ]

This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to
use the cdc_ether driver. However, using this driver, with the system
suspended the device constantly sends pause-frames as soon as the
receive buffer fills up. This causes issues with other devices, where
some Ethernet switches stop forwarding packets altogether.

Using the Realtek driver (r8152) fixes this issue. Pause frames are no
longer sent while the host system is suspended.

Signed-off-by: Leon Schuermann <leon@is.currently.online>
Tested-by: Leon Schuermann <leon@is.currently.online>
Link: https://lore.kernel.org/r/20210111190312.12589-2-leon@is.currently.online
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/cdc_ether.c | 7 +++++++
 drivers/net/usb/r8152.c     | 1 +
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index f3def96d35d42..8c9eae5f30722 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -800,6 +800,13 @@ static const struct usb_device_id	products[] = {
 	.driver_info = 0,
 },
 
+/* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x721e, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
 /* ThinkPad USB-C Dock Gen 2 (based on Realtek RTL8153) */
 {
 	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0xa387, USB_CLASS_COMM,
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index e30792380812a..bd91d4bad49b2 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -5337,6 +5337,7 @@ static const struct usb_device_id rtl8152_table[] = {
 	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0x7205)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0x720c)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0x7214)},
+	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0x721e)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0xa387)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_LINKSYS, 0x0041)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_NVIDIA,  0x09ff)},
-- 
2.27.0

[PATCH AUTOSEL 4.14 6/9] net: stmmac: Fixed mtu channged by cache aligned

[Sasha Levin]

From: David Wu <david.wu@rock-chips.com>

[ Upstream commit 5b55299eed78538cc4746e50ee97103a1643249c ]

Since the original mtu is not used when the mtu is updated,
the mtu is aligned with cache, this will get an incorrect.
For example, if you want to configure the mtu to be 1500,
but mtu 1536 is configured in fact.

Fixed: eaf4fac478077 ("net: stmmac: Do not accept invalid MTU values")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Link: https://lore.kernel.org/r/20210113034109.27865-1-david.wu@rock-chips.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d5ebaf62d12fe..a7b30f0605362 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3613,6 +3613,7 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 	int txfifosz = priv->plat->tx_fifo_size;
+	const int mtu = new_mtu;
 
 	if (txfifosz == 0)
 		txfifosz = priv->dma_cap.tx_fifo_size;
@@ -3630,7 +3631,7 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
 	if ((txfifosz < new_mtu) || (new_mtu > BUF_SIZE_16KiB))
 		return -EINVAL;
 
-	dev->mtu = new_mtu;
+	dev->mtu = mtu;
 
 	netdev_update_features(dev);
 
-- 
2.27.0