[PATCH net 0/7][pull request] Intel Wired LAN Driver Updates 2021-01-22

[PATCH net 0/7][pull request] Intel Wired LAN Driver Updates 2021-01-22

[Tony Nguyen]

This series contains updates to the ice and i40e driver.

Henry corrects setting an unspecified protocol to IPPROTO_NONE instead of
0 for IPv6 flexbytes filters for ice.

Nick fixes the IPv6 extension header being processed incorrectly and
updates the netdev->dev_addr if it exists in hardware as it may have been
modified outside the ice driver.

Piotr fixes the XDP ring used for XDP_TX as it was being used
inconsistently which could cause packets to not be transmitted for the ice
driver.

Brett ensures a user cannot request more channels than available LAN MSI-X
and fixes the minimum allocation logic as it was incorrectly trying to use
more MSI-X than allocated for ice.

Stefan Assmann minimizes the delay between getting and using the VSI
pointer to prevent a possible crash for i40e.

The following are changes since commit 35c715c30b95205e64311c3bb3525094cd3d7236:
  Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue 100GbE

Brett Creeley (2):
  ice: Don't allow more channels than LAN MSI-X available
  ice: Fix MSI-X vector fallback logic

Henry Tieman (1):
  ice: fix FDir IPv6 flexbyte

Nick Nunley (2):
  ice: Implement flow for IPv6 next header (extension header)
  ice: update dev_addr in ice_set_mac_address even if HW filter exists

Piotr Raczynski (1):
  ice: use correct xdp_ring with XDP_TX action

Stefan Assmann (1):
  i40e: acquire VSI pointer only after VF is initialized

 .../net/ethernet/intel/i40e/i40e_virtchnl_pf.c   | 11 ++++-------
 drivers/net/ethernet/intel/ice/ice.h             |  4 +++-
 drivers/net/ethernet/intel/ice/ice_ethtool.c     |  8 ++++----
 .../net/ethernet/intel/ice/ice_ethtool_fdir.c    |  8 +++++++-
 drivers/net/ethernet/intel/ice/ice_lib.c         | 14 +++++++++-----
 drivers/net/ethernet/intel/ice/ice_main.c        | 16 +++++++++-------
 drivers/net/ethernet/intel/ice/ice_txrx.c        | 11 +++++++----
 7 files changed, 43 insertions(+), 29 deletions(-)

-- 
2.26.2

[PATCH net 1/7] ice: fix FDir IPv6 flexbyte

[Tony Nguyen]

From: Henry Tieman <henry.w.tieman@intel.com>

The packet classifier would occasionally misrecognize an IPv6 training
packet when the next protocol field was 0. The correct value for
unspecified protocol is IPPROTO_NONE.

Fixes: 165d80d6adab ("ice: Support IPv6 Flow Director filters")
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c b/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
index 2d27f66ac853..192729546bbf 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
@@ -1576,7 +1576,13 @@ ice_set_fdir_input_set(struct ice_vsi *vsi, struct ethtool_rx_flow_spec *fsp,
 		       sizeof(struct in6_addr));
 		input->ip.v6.l4_header = fsp->h_u.usr_ip6_spec.l4_4_bytes;
 		input->ip.v6.tc = fsp->h_u.usr_ip6_spec.tclass;
-		input->ip.v6.proto = fsp->h_u.usr_ip6_spec.l4_proto;
+
+		/* if no protocol requested, use IPPROTO_NONE */
+		if (!fsp->m_u.usr_ip6_spec.l4_proto)
+			input->ip.v6.proto = IPPROTO_NONE;
+		else
+			input->ip.v6.proto = fsp->h_u.usr_ip6_spec.l4_proto;
+
 		memcpy(input->mask.v6.dst_ip, fsp->m_u.usr_ip6_spec.ip6dst,
 		       sizeof(struct in6_addr));
 		memcpy(input->mask.v6.src_ip, fsp->m_u.usr_ip6_spec.ip6src,
-- 
2.26.2

[PATCH net 2/7] ice: Implement flow for IPv6 next header (extension header)

[Tony Nguyen]

From: Nick Nunley <nicholas.d.nunley@intel.com>

This patch is based on a similar change to i40e by Slawomir Laba:
"i40e: Implement flow for IPv6 next header (extension header)".

When a packet contains an IPv6 header with next header which is
an extension header and not a protocol one, the kernel function
skb_transport_header called with such sk_buff will return a
pointer to the extension header and not to the TCP one.

The above explained call caused a problem with packet processing
for skb with encapsulation for tunnel with ICE_TX_CTX_EIPT_IPV6.
The extension header was not skipped at all.

The ipv6_skip_exthdr function does check if next header of the IPV6
header is an extension header and doesn't modify the l4_proto pointer
if it points to a protocol header value so its safe to omit the
comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can
return value -1. This means that the skipping process failed
and there is something wrong with the packet so it will be dropped.

Fixes: a4e82a81f573 ("ice: Add support for tunnel offloads")
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_txrx.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index a2d0aad8cfdd..b6fa83c619dd 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -1923,12 +1923,15 @@ int ice_tx_csum(struct ice_tx_buf *first, struct ice_tx_offload_params *off)
 				  ICE_TX_CTX_EIPT_IPV4_NO_CSUM;
 			l4_proto = ip.v4->protocol;
 		} else if (first->tx_flags & ICE_TX_FLAGS_IPV6) {
+			int ret;
+
 			tunnel |= ICE_TX_CTX_EIPT_IPV6;
 			exthdr = ip.hdr + sizeof(*ip.v6);
 			l4_proto = ip.v6->nexthdr;
-			if (l4.hdr != exthdr)
-				ipv6_skip_exthdr(skb, exthdr - skb->data,
-						 &l4_proto, &frag_off);
+			ret = ipv6_skip_exthdr(skb, exthdr - skb->data,
+					       &l4_proto, &frag_off);
+			if (ret < 0)
+				return -1;
 		}
 
 		/* define outer transport */
-- 
2.26.2

[PATCH net 3/7] ice: update dev_addr in ice_set_mac_address even if HW filter exists

[Tony Nguyen]

From: Nick Nunley <nicholas.d.nunley@intel.com>

Fix the driver to copy the MAC address configured in ndo_set_mac_address
into dev_addr, even if the MAC filter already exists in HW. In some
situations (e.g. bonding) the netdev's dev_addr could have been modified
outside of the driver, with no change to the HW filter, so the driver
cannot assume that they match.

Fixes: 757976ab16be ("ice: Fix check for removing/adding mac filters")
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index c52b9bb0e3ab..fb81aa5979e3 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -4884,9 +4884,15 @@ static int ice_set_mac_address(struct net_device *netdev, void *pi)
 		goto err_update_filters;
 	}
 
-	/* Add filter for new MAC. If filter exists, just return success */
+	/* Add filter for new MAC. If filter exists, return success */
 	status = ice_fltr_add_mac(vsi, mac, ICE_FWD_TO_VSI);
 	if (status == ICE_ERR_ALREADY_EXISTS) {
+		/* Although this MAC filter is already present in hardware it's
+		 * possible in some cases (e.g. bonding) that dev_addr was
+		 * modified outside of the driver and needs to be restored back
+		 * to this value.
+		 */
+		memcpy(netdev->dev_addr, mac, netdev->addr_len);
 		netdev_dbg(netdev, "filter for MAC %pM already exists\n", mac);
 		return 0;
 	}
-- 
2.26.2

[PATCH net 4/7] ice: use correct xdp_ring with XDP_TX action

[Tony Nguyen]

From: Piotr Raczynski <piotr.raczynski@intel.com>

XDP queue number for XDP_TX action is used inconsistently
and may result with no packets transmitted. Fix queue number
used by the driver when doing XDP_TX, i.e. use receive queue
number as in ice_finalize_xdp_rx.

Also, using smp_processor_id() is wrong here and won't
work with less queues.

Fixes: efc2214b6047 ("ice: Add support for XDP")
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_txrx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index b6fa83c619dd..7946a90b2da7 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -546,7 +546,7 @@ ice_run_xdp(struct ice_ring *rx_ring, struct xdp_buff *xdp,
 	case XDP_PASS:
 		break;
 	case XDP_TX:
-		xdp_ring = rx_ring->vsi->xdp_rings[smp_processor_id()];
+		xdp_ring = rx_ring->vsi->xdp_rings[rx_ring->q_index];
 		result = ice_xmit_xdp_buff(xdp, xdp_ring);
 		break;
 	case XDP_REDIRECT:
-- 
2.26.2

Re: [PATCH net 4/7] ice: use correct xdp_ring with XDP_TX action

[Jakub Kicinski]

On Fri, 22 Jan 2021 15:57:31 -0800 Tony Nguyen wrote:
> From: Piotr Raczynski <piotr.raczynski@intel.com>
> 
> XDP queue number for XDP_TX action is used inconsistently
> and may result with no packets transmitted. Fix queue number
> used by the driver when doing XDP_TX, i.e. use receive queue
> number as in ice_finalize_xdp_rx.
> 
> Also, using smp_processor_id() is wrong here and won't
> work with less queues.
> 
> Fixes: efc2214b6047 ("ice: Add support for XDP")
> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_txrx.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
> index b6fa83c619dd..7946a90b2da7 100644
> --- a/drivers/net/ethernet/intel/ice/ice_txrx.c
> +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
> @@ -546,7 +546,7 @@ ice_run_xdp(struct ice_ring *rx_ring, struct xdp_buff *xdp,
>  	case XDP_PASS:
>  		break;
>  	case XDP_TX:
> -		xdp_ring = rx_ring->vsi->xdp_rings[smp_processor_id()];
> +		xdp_ring = rx_ring->vsi->xdp_rings[rx_ring->q_index];

But then what protects you from one CPU trying to use the tx ring from
XDP_TX and another from ice_xdp_xmit() ?

Also why does this code not check queue_index < vsi->num_xdp_txq
like ice_xdp_xmit() does?

Let me CC your local XDP experts whose tags I'm surprised not to see on
this patch.

>  		result = ice_xmit_xdp_buff(xdp, xdp_ring);
>  		break;
>  	case XDP_REDIRECT:

Re: [PATCH net 4/7] ice: use correct xdp_ring with XDP_TX action

[Nguyen, Anthony L]

On Sat, 2021-01-23 at 19:52 -0800, Jakub Kicinski wrote:
> On Fri, 22 Jan 2021 15:57:31 -0800 Tony Nguyen wrote:
> > From: Piotr Raczynski <piotr.raczynski@intel.com>
> > 
> > XDP queue number for XDP_TX action is used inconsistently
> > and may result with no packets transmitted. Fix queue number
> > used by the driver when doing XDP_TX, i.e. use receive queue
> > number as in ice_finalize_xdp_rx.
> > 
> > Also, using smp_processor_id() is wrong here and won't
> > work with less queues.
> > 
> > Fixes: efc2214b6047 ("ice: Add support for XDP")
> > Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
> > Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
> > Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
> > ---
> >  drivers/net/ethernet/intel/ice/ice_txrx.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c
> > b/drivers/net/ethernet/intel/ice/ice_txrx.c
> > index b6fa83c619dd..7946a90b2da7 100644
> > --- a/drivers/net/ethernet/intel/ice/ice_txrx.c
> > +++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
> > @@ -546,7 +546,7 @@ ice_run_xdp(struct ice_ring *rx_ring, struct
> > xdp_buff *xdp,
> >  	case XDP_PASS:
> >  		break;
> >  	case XDP_TX:
> > -		xdp_ring = rx_ring->vsi->xdp_rings[smp_processor_id()];
> > +		xdp_ring = rx_ring->vsi->xdp_rings[rx_ring->q_index];
> 
> But then what protects you from one CPU trying to use the tx ring
> from
> XDP_TX and another from ice_xdp_xmit() ?
> 
> Also why does this code not check queue_index < vsi->num_xdp_txq
> like ice_xdp_xmit() does?

Hi Jakub

I'm still waiting for information from the author. I'm going to drop
this patch from the series and resubmit.

> Let me CC your local XDP experts whose tags I'm surprised not to see
> on
> this patch.

I'll add them to the XDP patches in the future.


Thanks,
Tony

[PATCH net 5/7] ice: Don't allow more channels than LAN MSI-X available

[Tony Nguyen]

From: Brett Creeley <brett.creeley@intel.com>

Currently users could create more channels than LAN MSI-X available.
This is happening because there is no check against pf->num_lan_msix
when checking the max allowed channels and will cause performance issues
if multiple Tx and Rx queues are tied to a single MSI-X. Fix this by not
allowing more channels than LAN MSI-X available in pf->num_lan_msix.

Fixes: 87324e747fde ("ice: Implement ethtool ops for channels")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 9e8e9531cd87..69c113a4de7e 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -3258,8 +3258,8 @@ ice_set_rxfh(struct net_device *netdev, const u32 *indir, const u8 *key,
  */
 static int ice_get_max_txq(struct ice_pf *pf)
 {
-	return min_t(int, num_online_cpus(),
-		     pf->hw.func_caps.common_cap.num_txq);
+	return min3(pf->num_lan_msix, (u16)num_online_cpus(),
+		    (u16)pf->hw.func_caps.common_cap.num_txq);
 }
 
 /**
@@ -3268,8 +3268,8 @@ static int ice_get_max_txq(struct ice_pf *pf)
  */
 static int ice_get_max_rxq(struct ice_pf *pf)
 {
-	return min_t(int, num_online_cpus(),
-		     pf->hw.func_caps.common_cap.num_rxq);
+	return min3(pf->num_lan_msix, (u16)num_online_cpus(),
+		    (u16)pf->hw.func_caps.common_cap.num_rxq);
 }
 
 /**
-- 
2.26.2

[PATCH net 6/7] ice: Fix MSI-X vector fallback logic

[Tony Nguyen]

From: Brett Creeley <brett.creeley@intel.com>

The current MSI-X enablement logic tries to enable best-case MSI-X
vectors and if that fails we only support a bare-minimum set. This
includes a single MSI-X for 1 Tx and 1 Rx queue and a single MSI-X
for the OICR interrupt. Unfortunately, the driver fails to load when we
don't get as many MSI-X as requested for a couple reasons.

First, the code to allocate MSI-X in the driver tries to allocate
num_online_cpus() MSI-X for LAN traffic without caring about the number
of MSI-X actually enabled/requested from the kernel for LAN traffic.
So, when calling ice_get_res() for the PF VSI, it returns failure
because the number of available vectors is less than requested. Fix
this by not allowing the PF VSI to allocation  more than
pf->num_lan_msix MSI-X vectors and pf->num_lan_msix Rx/Tx queues.
Limiting the number of queues is done because we don't want more than
1 Tx/Rx queue per interrupt due to performance conerns.

Second, the driver assigns pf->num_lan_msix = 2, to account for LAN
traffic and the OICR. However, pf->num_lan_msix is only meant for LAN
MSI-X. This is causing a failure when the PF VSI tries to
allocate/reserve the minimum pf->num_lan_msix because the OICR MSI-X has
already been reserved, so there may not be enough MSI-X vectors left.
Fix this by setting pf->num_lan_msix = 1 for the failure case. Then the
ICE_MIN_MSIX accounts for the LAN MSI-X and the OICR MSI-X needed for
the failure case.

Update the related defines used in ice_ena_msix_range() to align with
the above behavior and remove the unused RDMA defines because RDMA is
currently not supported. Also, remove the now incorrect comment.

Fixes: 152b978a1f90 ("ice: Rework ice_ena_msix_range")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice.h      |  4 +++-
 drivers/net/ethernet/intel/ice/ice_lib.c  | 14 +++++++++-----
 drivers/net/ethernet/intel/ice/ice_main.c |  8 ++------
 3 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index 56725356a17b..fa1e128c24ec 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -68,7 +68,9 @@
 #define ICE_INT_NAME_STR_LEN	(IFNAMSIZ + 16)
 #define ICE_AQ_LEN		64
 #define ICE_MBXSQ_LEN		64
-#define ICE_MIN_MSIX		2
+#define ICE_MIN_LAN_TXRX_MSIX	1
+#define ICE_MIN_LAN_OICR_MSIX	1
+#define ICE_MIN_MSIX		(ICE_MIN_LAN_TXRX_MSIX + ICE_MIN_LAN_OICR_MSIX)
 #define ICE_FDIR_MSIX		1
 #define ICE_NO_VSI		0xffff
 #define ICE_VSI_MAP_CONTIG	0
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 3df67486d42d..ad9c22a1b97a 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -161,8 +161,9 @@ static void ice_vsi_set_num_qs(struct ice_vsi *vsi, u16 vf_id)
 
 	switch (vsi->type) {
 	case ICE_VSI_PF:
-		vsi->alloc_txq = min_t(int, ice_get_avail_txq_count(pf),
-				       num_online_cpus());
+		vsi->alloc_txq = min3(pf->num_lan_msix,
+				      ice_get_avail_txq_count(pf),
+				      (u16)num_online_cpus());
 		if (vsi->req_txq) {
 			vsi->alloc_txq = vsi->req_txq;
 			vsi->num_txq = vsi->req_txq;
@@ -174,8 +175,9 @@ static void ice_vsi_set_num_qs(struct ice_vsi *vsi, u16 vf_id)
 		if (!test_bit(ICE_FLAG_RSS_ENA, pf->flags)) {
 			vsi->alloc_rxq = 1;
 		} else {
-			vsi->alloc_rxq = min_t(int, ice_get_avail_rxq_count(pf),
-					       num_online_cpus());
+			vsi->alloc_rxq = min3(pf->num_lan_msix,
+					      ice_get_avail_rxq_count(pf),
+					      (u16)num_online_cpus());
 			if (vsi->req_rxq) {
 				vsi->alloc_rxq = vsi->req_rxq;
 				vsi->num_rxq = vsi->req_rxq;
@@ -184,7 +186,9 @@ static void ice_vsi_set_num_qs(struct ice_vsi *vsi, u16 vf_id)
 
 		pf->num_lan_rx = vsi->alloc_rxq;
 
-		vsi->num_q_vectors = max_t(int, vsi->alloc_rxq, vsi->alloc_txq);
+		vsi->num_q_vectors = min_t(int, pf->num_lan_msix,
+					   max_t(int, vsi->alloc_rxq,
+						 vsi->alloc_txq));
 		break;
 	case ICE_VSI_VF:
 		vf = &pf->vf[vsi->vf_id];
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index fb81aa5979e3..e10ca8929f85 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -3430,18 +3430,14 @@ static int ice_ena_msix_range(struct ice_pf *pf)
 	if (v_actual < v_budget) {
 		dev_warn(dev, "not enough OS MSI-X vectors. requested = %d, obtained = %d\n",
 			 v_budget, v_actual);
-/* 2 vectors each for LAN and RDMA (traffic + OICR), one for flow director */
-#define ICE_MIN_LAN_VECS 2
-#define ICE_MIN_RDMA_VECS 2
-#define ICE_MIN_VECS (ICE_MIN_LAN_VECS + ICE_MIN_RDMA_VECS + 1)
 
-		if (v_actual < ICE_MIN_LAN_VECS) {
+		if (v_actual < ICE_MIN_MSIX) {
 			/* error if we can't get minimum vectors */
 			pci_disable_msix(pf->pdev);
 			err = -ERANGE;
 			goto msix_err;
 		} else {
-			pf->num_lan_msix = ICE_MIN_LAN_VECS;
+			pf->num_lan_msix = ICE_MIN_LAN_TXRX_MSIX;
 		}
 	}
 
-- 
2.26.2

[PATCH net 7/7] i40e: acquire VSI pointer only after VF is initialized

[Tony Nguyen]

From: Stefan Assmann <sassmann@kpanic.de>

This change simplifies the VF initialization check and also minimizes
the delay between acquiring the VSI pointer and using it. As known by
the commit being fixed, there is a risk of the VSI pointer getting
changed. Therefore minimize the delay between getting and using the
pointer.

Fixes: 9889707b06ac ("i40e: Fix crash caused by stress setting of VF MAC addresses")
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 21ee56420c3a..7efc61aacb0a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -4046,20 +4046,16 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 		goto error_param;
 
 	vf = &pf->vf[vf_id];
-	vsi = pf->vsi[vf->lan_vsi_idx];
 
 	/* When the VF is resetting wait until it is done.
 	 * It can take up to 200 milliseconds,
 	 * but wait for up to 300 milliseconds to be safe.
-	 * If the VF is indeed in reset, the vsi pointer has
-	 * to show on the newly loaded vsi under pf->vsi[id].
+	 * Acquire the VSI pointer only after the VF has been
+	 * properly initialized.
 	 */
 	for (i = 0; i < 15; i++) {
-		if (test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) {
-			if (i > 0)
-				vsi = pf->vsi[vf->lan_vsi_idx];
+		if (test_bit(I40E_VF_STATE_INIT, &vf->vf_states))
 			break;
-		}
 		msleep(20);
 	}
 	if (!test_bit(I40E_VF_STATE_INIT, &vf->vf_states)) {
@@ -4068,6 +4064,7 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 		ret = -EAGAIN;
 		goto error_param;
 	}
+	vsi = pf->vsi[vf->lan_vsi_idx];
 
 	if (is_multicast_ether_addr(mac)) {
 		dev_err(&pf->pdev->dev,
-- 
2.26.2