From: Mat Martineau <mathew.j.martineau@linux.intel.com>
To: netdev@vger.kernel.org
Cc: Geliang Tang <geliangtang@gmail.com>,
davem@davemloft.net, kuba@kernel.org, mptcp@lists.01.org,
Mat Martineau <mathew.j.martineau@linux.intel.com>
Subject: [PATCH net-next v2 15/15] selftests: mptcp: add testcases for ADD_ADDR with port
Date: Mon, 1 Feb 2021 15:09:20 -0800 [thread overview]
Message-ID: <20210201230920.66027-16-mathew.j.martineau@linux.intel.com> (raw)
In-Reply-To: <20210201230920.66027-1-mathew.j.martineau@linux.intel.com>
From: Geliang Tang <geliangtang@gmail.com>
This patch adds testcases for ADD_ADDR with port and the related MIB
counters check in chk_add_nr. The output looks like this:
24 signal address with port syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ] - pt [ ok ]
syn[ ok ] - synack[ ok ] - ack[ ok ]
syn[ ok ] - ack [ ok ]
25 subflow and signal with port syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ] - pt [ ok ]
syn[ ok ] - synack[ ok ] - ack[ ok ]
syn[ ok ] - ack [ ok ]
26 remove single address with port syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ] - pt [ ok ]
syn[ ok ] - synack[ ok ] - ack[ ok ]
syn[ ok ] - ack [ ok ]
rm [ ok ] - sf [ ok ]
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
---
.../testing/selftests/net/mptcp/mptcp_join.sh | 160 +++++++++++++++++-
1 file changed, 159 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index b5cd2a48831e..b8fd924033b1 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -487,6 +487,12 @@ chk_add_nr()
{
local add_nr=$1
local echo_nr=$2
+ local port_nr=${3:-0}
+ local syn_nr=${4:-$port_nr}
+ local syn_ack_nr=${5:-$port_nr}
+ local ack_nr=${6:-$port_nr}
+ local mis_syn_nr=${7:-0}
+ local mis_ack_nr=${8:-0}
local count
local dump_stats
@@ -509,7 +515,87 @@ chk_add_nr()
ret=1
dump_stats=1
else
- echo "[ ok ]"
+ echo -n "[ ok ]"
+ fi
+
+ if [ $port_nr -gt 0 ]; then
+ echo -n " - pt "
+ count=`ip netns exec $ns2 nstat -as | grep MPTcpExtPortAdd | awk '{print $2}'`
+ [ -z "$count" ] && count=0
+ if [ "$count" != "$port_nr" ]; then
+ echo "[fail] got $count ADD_ADDR[s] with a port-number expected $port_nr"
+ ret=1
+ dump_stats=1
+ else
+ echo "[ ok ]"
+ fi
+
+ printf "%-39s %s" " " "syn"
+ count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortSynRx |
+ awk '{print $2}'`
+ [ -z "$count" ] && count=0
+ if [ "$count" != "$syn_nr" ]; then
+ echo "[fail] got $count JOIN[s] syn with a different \
+ port-number expected $syn_nr"
+ ret=1
+ dump_stats=1
+ else
+ echo -n "[ ok ]"
+ fi
+
+ echo -n " - synack"
+ count=`ip netns exec $ns2 nstat -as | grep MPTcpExtMPJoinPortSynAckRx |
+ awk '{print $2}'`
+ [ -z "$count" ] && count=0
+ if [ "$count" != "$syn_ack_nr" ]; then
+ echo "[fail] got $count JOIN[s] synack with a different \
+ port-number expected $syn_ack_nr"
+ ret=1
+ dump_stats=1
+ else
+ echo -n "[ ok ]"
+ fi
+
+ echo -n " - ack"
+ count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMPJoinPortAckRx |
+ awk '{print $2}'`
+ [ -z "$count" ] && count=0
+ if [ "$count" != "$ack_nr" ]; then
+ echo "[fail] got $count JOIN[s] ack with a different \
+ port-number expected $ack_nr"
+ ret=1
+ dump_stats=1
+ else
+ echo "[ ok ]"
+ fi
+
+ printf "%-39s %s" " " "syn"
+ count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortSynRx |
+ awk '{print $2}'`
+ [ -z "$count" ] && count=0
+ if [ "$count" != "$mis_syn_nr" ]; then
+ echo "[fail] got $count JOIN[s] syn with a mismatched \
+ port-number expected $mis_syn_nr"
+ ret=1
+ dump_stats=1
+ else
+ echo -n "[ ok ]"
+ fi
+
+ echo -n " - ack "
+ count=`ip netns exec $ns1 nstat -as | grep MPTcpExtMismatchPortAckRx |
+ awk '{print $2}'`
+ [ -z "$count" ] && count=0
+ if [ "$count" != "$mis_ack_nr" ]; then
+ echo "[fail] got $count JOIN[s] ack with a mismatched \
+ port-number expected $mis_ack_nr"
+ ret=1
+ dump_stats=1
+ else
+ echo "[ ok ]"
+ fi
+ else
+ echo ""
fi
if [ "${dump_stats}" = 1 ]; then
@@ -955,6 +1041,78 @@ chk_join_nr "single address, backup" 1 1 1
chk_add_nr 1 1
chk_prio_nr 1 0
+# signal address with port
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "signal address with port" 1 1 1
+chk_add_nr 1 1 1
+
+# subflow and signal with port
+reset
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "subflow and signal with port" 2 2 2
+chk_add_nr 1 1 1
+
+# single address with port, remove
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
+chk_join_nr "remove single address with port" 1 1 1
+chk_add_nr 1 1 1
+chk_rm_nr 0 0
+
+# subflow and signal with port, remove
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
+chk_join_nr "remove subflow and signal with port" 2 2 2
+chk_add_nr 1 1 1
+chk_rm_nr 1 1
+
+# subflows and signal with port, flush
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
+chk_join_nr "flush subflows and signal with port" 3 3 3
+chk_add_nr 1 1
+chk_rm_nr 2 2
+
+# multiple addresses with port
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 2 2
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10100
+ip netns exec $ns2 ./pm_nl_ctl limits 2 2
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "multiple addresses with port" 2 2 2
+chk_add_nr 2 2 2
+
+# multiple addresses with ports
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 2 2
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal port 10100
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.3.1 flags signal port 10101
+ip netns exec $ns2 ./pm_nl_ctl limits 2 2
+run_tests $ns1 $ns2 10.0.1.1
+chk_join_nr "multiple addresses with ports" 2 2 2
+chk_add_nr 2 2 2
+
# single subflow, syncookies
reset_with_cookies
ip netns exec $ns1 ./pm_nl_ctl limits 0 1
--
2.30.0
next prev parent reply other threads:[~2021-02-01 23:18 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-01 23:09 [PATCH net-next v2 00/15] mptcp: ADD_ADDR enhancements Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 01/15] mptcp: use WRITE_ONCE for the pernet *_max Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 02/15] mptcp: drop *_max fields in mptcp_pm_data Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 03/15] mptcp: create subflow or signal addr for newly added address Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 04/15] mptcp: send ack for every add_addr Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 05/15] selftests: mptcp: use minus values for removing address numbers Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 06/15] selftests: mptcp: add testcases for newly added addresses Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 07/15] mptcp: create the listening socket for new port Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 08/15] mptcp: drop unused skb in subflow_token_join_request Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 09/15] mptcp: add a new helper subflow_req_create_thmac Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 10/15] mptcp: add port number check for MP_JOIN Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 11/15] mptcp: enable use_port when invoke addresses_equal Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 12/15] mptcp: deal with MPTCP_PM_ADDR_ATTR_PORT in PM netlink Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 13/15] selftests: mptcp: add port argument for pm_nl_ctl Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 14/15] mptcp: add the mibs for ADD_ADDR with port Mat Martineau
2021-02-01 23:09 ` Mat Martineau [this message]
2021-02-03 3:10 ` [PATCH net-next v2 00/15] mptcp: ADD_ADDR enhancements patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210201230920.66027-16-mathew.j.martineau@linux.intel.com \
--to=mathew.j.martineau@linux.intel.com \
--cc=davem@davemloft.net \
--cc=geliangtang@gmail.com \
--cc=kuba@kernel.org \
--cc=mptcp@lists.01.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).