netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mat Martineau <mathew.j.martineau@linux.intel.com>
To: netdev@vger.kernel.org
Cc: Geliang Tang <geliangtang@gmail.com>,
	davem@davemloft.net, kuba@kernel.org, mptcp@lists.01.org,
	Mat Martineau <mathew.j.martineau@linux.intel.com>
Subject: [PATCH net-next v2 05/15] selftests: mptcp: use minus values for removing address numbers
Date: Mon,  1 Feb 2021 15:09:10 -0800	[thread overview]
Message-ID: <20210201230920.66027-6-mathew.j.martineau@linux.intel.com> (raw)
In-Reply-To: <20210201230920.66027-1-mathew.j.martineau@linux.intel.com>

From: Geliang Tang <geliangtang@gmail.com>

This patch changes the removing addresses numbers to minus values, left
the plus values for the adding addresses numbers.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
---
 .../testing/selftests/net/mptcp/mptcp_join.sh | 32 ++++++++++---------
 1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index be34b9ccbd20..e5fb2b01f31c 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -209,8 +209,8 @@ do_transfer()
 	srv_proto="$4"
 	connect_addr="$5"
 	test_link_fail="$6"
-	rm_nr_ns1="$7"
-	rm_nr_ns2="$8"
+	addr_nr_ns1="$7"
+	addr_nr_ns2="$8"
 	speed="$9"
 	bkup="${10}"
 
@@ -264,7 +264,8 @@ do_transfer()
 	fi
 	cpid=$!
 
-	if [ $rm_nr_ns1 -gt 0 ]; then
+	if [ $addr_nr_ns1 -lt 0 ]; then
+		let rm_nr_ns1=-addr_nr_ns1
 		if [ $rm_nr_ns1 -lt 8 ]; then
 			counter=1
 			sleep 1
@@ -281,7 +282,8 @@ do_transfer()
 		fi
 	fi
 
-	if [ $rm_nr_ns2 -gt 0 ]; then
+	if [ $addr_nr_ns2 -lt 0 ]; then
+		let rm_nr_ns2=-addr_nr_ns2
 		if [ $rm_nr_ns2 -lt 8 ]; then
 			counter=1
 			sleep 1
@@ -368,8 +370,8 @@ run_tests()
 	connector_ns="$2"
 	connect_addr="$3"
 	test_linkfail="${4:-0}"
-	rm_nr_ns1="${5:-0}"
-	rm_nr_ns2="${6:-0}"
+	addr_nr_ns1="${5:-0}"
+	addr_nr_ns2="${6:-0}"
 	speed="${7:-fast}"
 	bkup="${8:-""}"
 	lret=0
@@ -386,7 +388,7 @@ run_tests()
 	fi
 
 	do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} \
-		${test_linkfail} ${rm_nr_ns1} ${rm_nr_ns2} ${speed} ${bkup}
+		${test_linkfail} ${addr_nr_ns1} ${addr_nr_ns2} ${speed} ${bkup}
 	lret=$?
 
 	if [ "$test_linkfail" -eq 1 ];then
@@ -677,7 +679,7 @@ reset
 ip netns exec $ns1 ./pm_nl_ctl limits 0 1
 ip netns exec $ns2 ./pm_nl_ctl limits 0 1
 ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow
+run_tests $ns1 $ns2 10.0.1.1 0 0 -1 slow
 chk_join_nr "remove single subflow" 1 1 1
 chk_rm_nr 1 1
 
@@ -687,7 +689,7 @@ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
 ip netns exec $ns2 ./pm_nl_ctl limits 0 2
 ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
 ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow
+run_tests $ns1 $ns2 10.0.1.1 0 0 -2 slow
 chk_join_nr "remove multiple subflows" 2 2 2
 chk_rm_nr 2 2
 
@@ -696,7 +698,7 @@ reset
 ip netns exec $ns1 ./pm_nl_ctl limits 0 1
 ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
 ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
+run_tests $ns1 $ns2 10.0.1.1 0 -1 0 slow
 chk_join_nr "remove single address" 1 1 1
 chk_add_nr 1 1
 chk_rm_nr 0 0
@@ -707,7 +709,7 @@ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
 ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
 ip netns exec $ns2 ./pm_nl_ctl limits 1 2
 ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 1 1 slow
+run_tests $ns1 $ns2 10.0.1.1 0 -1 -1 slow
 chk_join_nr "remove subflow and signal" 2 2 2
 chk_add_nr 1 1
 chk_rm_nr 1 1
@@ -719,7 +721,7 @@ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
 ip netns exec $ns2 ./pm_nl_ctl limits 1 3
 ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
 ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 1 2 slow
+run_tests $ns1 $ns2 10.0.1.1 0 -1 -2 slow
 chk_join_nr "remove subflows and signal" 3 3 3
 chk_add_nr 1 1
 chk_rm_nr 2 2
@@ -731,7 +733,7 @@ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
 ip netns exec $ns2 ./pm_nl_ctl limits 1 3
 ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
 ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 8 8 slow
+run_tests $ns1 $ns2 10.0.1.1 0 -8 -8 slow
 chk_join_nr "flush subflows and signal" 3 3 3
 chk_add_nr 1 1
 chk_rm_nr 2 2
@@ -774,7 +776,7 @@ reset
 ip netns exec $ns1 ./pm_nl_ctl limits 0 1
 ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
 ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-run_tests $ns1 $ns2 dead:beef:1::1 0 1 0 slow
+run_tests $ns1 $ns2 dead:beef:1::1 0 -1 0 slow
 chk_join_nr "remove single address IPv6" 1 1 1
 chk_add_nr 1 1
 chk_rm_nr 0 0
@@ -785,7 +787,7 @@ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
 ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
 ip netns exec $ns2 ./pm_nl_ctl limits 1 2
 ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow
-run_tests $ns1 $ns2 dead:beef:1::1 0 1 1 slow
+run_tests $ns1 $ns2 dead:beef:1::1 0 -1 -1 slow
 chk_join_nr "remove subflow and signal IPv6" 2 2 2
 chk_add_nr 1 1
 chk_rm_nr 1 1
-- 
2.30.0


  parent reply	other threads:[~2021-02-01 23:14 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-01 23:09 [PATCH net-next v2 00/15] mptcp: ADD_ADDR enhancements Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 01/15] mptcp: use WRITE_ONCE for the pernet *_max Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 02/15] mptcp: drop *_max fields in mptcp_pm_data Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 03/15] mptcp: create subflow or signal addr for newly added address Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 04/15] mptcp: send ack for every add_addr Mat Martineau
2021-02-01 23:09 ` Mat Martineau [this message]
2021-02-01 23:09 ` [PATCH net-next v2 06/15] selftests: mptcp: add testcases for newly added addresses Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 07/15] mptcp: create the listening socket for new port Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 08/15] mptcp: drop unused skb in subflow_token_join_request Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 09/15] mptcp: add a new helper subflow_req_create_thmac Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 10/15] mptcp: add port number check for MP_JOIN Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 11/15] mptcp: enable use_port when invoke addresses_equal Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 12/15] mptcp: deal with MPTCP_PM_ADDR_ATTR_PORT in PM netlink Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 13/15] selftests: mptcp: add port argument for pm_nl_ctl Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 14/15] mptcp: add the mibs for ADD_ADDR with port Mat Martineau
2021-02-01 23:09 ` [PATCH net-next v2 15/15] selftests: mptcp: add testcases " Mat Martineau
2021-02-03  3:10 ` [PATCH net-next v2 00/15] mptcp: ADD_ADDR enhancements patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210201230920.66027-6-mathew.j.martineau@linux.intel.com \
    --to=mathew.j.martineau@linux.intel.com \
    --cc=davem@davemloft.net \
    --cc=geliangtang@gmail.com \
    --cc=kuba@kernel.org \
    --cc=mptcp@lists.01.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).