[PATCH AUTOSEL 4.14 01/21] net: fec: ptp: avoid register access when ipg clock is disabled

[PATCH AUTOSEL 4.14 01/21] net: fec: ptp: avoid register access when ipg clock is disabled

[Sasha Levin]

From: Heiko Thiery <heiko.thiery@gmail.com>

[ Upstream commit 6a4d7234ae9a3bb31181f348ade9bbdb55aeb5c5 ]

When accessing the timecounter register on an i.MX8MQ the kernel hangs.
This is only the case when the interface is down. This can be reproduced
by reading with 'phc_ctrl eth0 get'.

Like described in the change in 91c0d987a9788dcc5fe26baafd73bf9242b68900
the igp clock is disabled when the interface is down and leads to a
system hang.

So we check if the ptp clock status before reading the timecounter
register.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20210225211514.9115-1-heiko.thiery@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_ptp.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c
index 6ebad3fac81d..e63df6455fba 100644
--- a/drivers/net/ethernet/freescale/fec_ptp.c
+++ b/drivers/net/ethernet/freescale/fec_ptp.c
@@ -396,9 +396,16 @@ static int fec_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
 	u64 ns;
 	unsigned long flags;
 
+	mutex_lock(&adapter->ptp_clk_mutex);
+	/* Check the ptp clock */
+	if (!adapter->ptp_clk_on) {
+		mutex_unlock(&adapter->ptp_clk_mutex);
+		return -EINVAL;
+	}
 	spin_lock_irqsave(&adapter->tmreg_lock, flags);
 	ns = timecounter_read(&adapter->tc);
 	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+	mutex_unlock(&adapter->ptp_clk_mutex);
 
 	*ts = ns_to_timespec64(ns);
 
-- 
2.30.1

[PATCH AUTOSEL 4.14 03/21] atm: eni: dont release is never initialized

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit 4deb550bc3b698a1f03d0332cde3df154d1b6c1e ]

label err_eni_release is reachable when eni_start() fail.
In eni_start() it calls dev->phy->start() in the last step, if start()
fail we don't need to call phy->stop(), if start() is never called, we
neither need to call phy->stop(), otherwise null-ptr-deref will happen.

In order to fix this issue, don't call phy->stop() in label err_eni_release

[    4.875714] ==================================================================
[    4.876091] BUG: KASAN: null-ptr-deref in suni_stop+0x47/0x100 [suni]
[    4.876433] Read of size 8 at addr 0000000000000030 by task modprobe/95
[    4.876778]
[    4.876862] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #2
[    4.877290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd94
[    4.877876] Call Trace:
[    4.878009]  dump_stack+0x7d/0xa3
[    4.878191]  kasan_report.cold+0x10c/0x10e
[    4.878410]  ? __slab_free+0x2f0/0x340
[    4.878612]  ? suni_stop+0x47/0x100 [suni]
[    4.878832]  suni_stop+0x47/0x100 [suni]
[    4.879043]  eni_do_release+0x3b/0x70 [eni]
[    4.879269]  eni_init_one.cold+0x1152/0x1747 [eni]
[    4.879528]  ? _raw_spin_lock_irqsave+0x7b/0xd0
[    4.879768]  ? eni_ioctl+0x270/0x270 [eni]
[    4.879990]  ? __mutex_lock_slowpath+0x10/0x10
[    4.880226]  ? eni_ioctl+0x270/0x270 [eni]
[    4.880448]  local_pci_probe+0x6f/0xb0
[    4.880650]  pci_device_probe+0x171/0x240
[    4.880864]  ? pci_device_remove+0xe0/0xe0
[    4.881086]  ? kernfs_create_link+0xb6/0x110
[    4.881315]  ? sysfs_do_create_link_sd.isra.0+0x76/0xe0
[    4.881594]  really_probe+0x161/0x420
[    4.881791]  driver_probe_device+0x6d/0xd0
[    4.882010]  device_driver_attach+0x82/0x90
[    4.882233]  ? device_driver_attach+0x90/0x90
[    4.882465]  __driver_attach+0x60/0x100
[    4.882671]  ? device_driver_attach+0x90/0x90
[    4.882903]  bus_for_each_dev+0xe1/0x140
[    4.883114]  ? subsys_dev_iter_exit+0x10/0x10
[    4.883346]  ? klist_node_init+0x61/0x80
[    4.883557]  bus_add_driver+0x254/0x2a0
[    4.883764]  driver_register+0xd3/0x150
[    4.883971]  ? 0xffffffffc0038000
[    4.884149]  do_one_initcall+0x84/0x250
[    4.884355]  ? trace_event_raw_event_initcall_finish+0x150/0x150
[    4.884674]  ? unpoison_range+0xf/0x30
[    4.884875]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    4.885150]  ? unpoison_range+0xf/0x30
[    4.885352]  ? unpoison_range+0xf/0x30
[    4.885557]  do_init_module+0xf8/0x350
[    4.885760]  load_module+0x3fe6/0x4340
[    4.885960]  ? vm_unmap_ram+0x1d0/0x1d0
[    4.886166]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    4.886441]  ? module_frob_arch_sections+0x20/0x20
[    4.886697]  ? __do_sys_finit_module+0x108/0x170
[    4.886941]  __do_sys_finit_module+0x108/0x170
[    4.887178]  ? __ia32_sys_init_module+0x40/0x40
[    4.887419]  ? file_open_root+0x200/0x200
[    4.887634]  ? do_sys_open+0x85/0xe0
[    4.887826]  ? filp_open+0x50/0x50
[    4.888009]  ? fpregs_assert_state_consistent+0x4d/0x60
[    4.888287]  ? exit_to_user_mode_prepare+0x2f/0x130
[    4.888547]  do_syscall_64+0x33/0x40
[    4.888739]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    4.889010] RIP: 0033:0x7ff62fcf1cf7
[    4.889202] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f71
[    4.890172] RSP: 002b:00007ffe6644ade8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    4.890570] RAX: ffffffffffffffda RBX: 0000000000f2ca70 RCX: 00007ff62fcf1cf7
[    4.890944] RDX: 0000000000000000 RSI: 0000000000f2b9e0 RDI: 0000000000000003
[    4.891318] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[    4.891691] R10: 00007ff62fd55300 R11: 0000000000000246 R12: 0000000000f2b9e0
[    4.892064] R13: 0000000000000000 R14: 0000000000f2bdd0 R15: 0000000000000001
[    4.892439] ==================================================================

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/eni.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index ba549d945479..ffe519663687 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -2279,7 +2279,8 @@ static int eni_init_one(struct pci_dev *pci_dev,
 	return rc;
 
 err_eni_release:
-	eni_do_release(dev);
+	dev->phy = NULL;
+	iounmap(ENI_DEV(dev)->ioaddr);
 err_unregister:
 	atm_dev_deregister(dev);
 err_free_consistent:
-- 
2.30.1

[PATCH AUTOSEL 4.14 04/21] atm: lanai: dont run lanai_dev_close if not open

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit a2bd45834e83d6c5a04d397bde13d744a4812dfc ]

lanai_dev_open() can fail. When it fail, lanai->base is unmapped and the
pci device is disabled. The caller, lanai_init_one(), then tries to run
atm_dev_deregister(). This will subsequently call lanai_dev_close() and
use the already released MMIO area.

To fix this issue, set the lanai->base to NULL if open fail,
and test the flag in lanai_dev_close().

[    8.324153] lanai: lanai_start() failed, err=19
[    8.324819] lanai(itf 0): shutting down interface
[    8.325211] BUG: unable to handle page fault for address: ffffc90000180024
[    8.325781] #PF: supervisor write access in kernel mode
[    8.326215] #PF: error_code(0x0002) - not-present page
[    8.326641] PGD 100000067 P4D 100000067 PUD 100139067 PMD 10013a067 PTE 0
[    8.327206] Oops: 0002 [#1] SMP KASAN NOPTI
[    8.327557] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #12
[    8.328229] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4
[    8.329145] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai]
[    8.329587] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80
[    8.330917] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246
[    8.331196] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a
[    8.331572] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000
[    8.331948] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa
[    8.332326] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4
[    8.332701] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88
[    8.333077] FS:  00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000
[    8.333502] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.333806] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0
[    8.334182] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    8.334557] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    8.334932] Call Trace:
[    8.335066]  atm_dev_deregister+0x161/0x1a0 [atm]
[    8.335324]  lanai_init_one.cold+0x20c/0x96d [lanai]
[    8.335594]  ? lanai_send+0x2a0/0x2a0 [lanai]
[    8.335831]  local_pci_probe+0x6f/0xb0
[    8.336039]  pci_device_probe+0x171/0x240
[    8.336255]  ? pci_device_remove+0xe0/0xe0
[    8.336475]  ? kernfs_create_link+0xb6/0x110
[    8.336704]  ? sysfs_do_create_link_sd.isra.0+0x76/0xe0
[    8.336983]  really_probe+0x161/0x420
[    8.337181]  driver_probe_device+0x6d/0xd0
[    8.337401]  device_driver_attach+0x82/0x90
[    8.337626]  ? device_driver_attach+0x90/0x90
[    8.337859]  __driver_attach+0x60/0x100
[    8.338065]  ? device_driver_attach+0x90/0x90
[    8.338298]  bus_for_each_dev+0xe1/0x140
[    8.338511]  ? subsys_dev_iter_exit+0x10/0x10
[    8.338745]  ? klist_node_init+0x61/0x80
[    8.338956]  bus_add_driver+0x254/0x2a0
[    8.339164]  driver_register+0xd3/0x150
[    8.339370]  ? 0xffffffffc0028000
[    8.339550]  do_one_initcall+0x84/0x250
[    8.339755]  ? trace_event_raw_event_initcall_finish+0x150/0x150
[    8.340076]  ? free_vmap_area_noflush+0x1a5/0x5c0
[    8.340329]  ? unpoison_range+0xf/0x30
[    8.340532]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    8.340806]  ? unpoison_range+0xf/0x30
[    8.341014]  ? unpoison_range+0xf/0x30
[    8.341217]  do_init_module+0xf8/0x350
[    8.341419]  load_module+0x3fe6/0x4340
[    8.341621]  ? vm_unmap_ram+0x1d0/0x1d0
[    8.341826]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    8.342101]  ? module_frob_arch_sections+0x20/0x20
[    8.342358]  ? __do_sys_finit_module+0x108/0x170
[    8.342604]  __do_sys_finit_module+0x108/0x170
[    8.342841]  ? __ia32_sys_init_module+0x40/0x40
[    8.343083]  ? file_open_root+0x200/0x200
[    8.343298]  ? do_sys_open+0x85/0xe0
[    8.343491]  ? filp_open+0x50/0x50
[    8.343675]  ? exit_to_user_mode_prepare+0xfc/0x130
[    8.343935]  do_syscall_64+0x33/0x40
[    8.344132]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    8.344401] RIP: 0033:0x7f08eb887cf7
[    8.344594] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41
[    8.345565] RSP: 002b:00007ffcd5c98ad8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    8.345962] RAX: ffffffffffffffda RBX: 00000000008fea70 RCX: 00007f08eb887cf7
[    8.346336] RDX: 0000000000000000 RSI: 00000000008fd9e0 RDI: 0000000000000003
[    8.346711] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[    8.347085] R10: 00007f08eb8eb300 R11: 0000000000000246 R12: 00000000008fd9e0
[    8.347460] R13: 0000000000000000 R14: 00000000008fddd0 R15: 0000000000000001
[    8.347836] Modules linked in: lanai(+) atm
[    8.348065] CR2: ffffc90000180024
[    8.348244] ---[ end trace 7fdc1c668f2003e5 ]---
[    8.348490] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai]
[    8.348772] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80
[    8.349745] RSP: 0018:ffff8881029ef680 EFLAGS: 00010246
[    8.350022] RAX: 000000000003fffe RBX: ffff888102fb4800 RCX: ffffffffc001a98a
[    8.350397] RDX: ffffc90000180000 RSI: 0000000000000246 RDI: ffff888102fb4000
[    8.350772] RBP: ffff888102fb4000 R08: ffffffff8115da8a R09: ffffed102053deaa
[    8.351151] R10: 0000000000000003 R11: ffffed102053dea9 R12: ffff888102fb48a4
[    8.351525] R13: ffffffffc00123c0 R14: ffff888102fb4b90 R15: ffff888102fb4b88
[    8.351918] FS:  00007f08eb9056a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000
[    8.352343] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.352647] CR2: ffffc90000180024 CR3: 0000000102a28000 CR4: 00000000000006f0
[    8.353022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    8.353397] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    8.353958] modprobe (95) used greatest stack depth: 26216 bytes left

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/lanai.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 2351dad78ff5..60e5e496bd3b 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -2240,6 +2240,7 @@ static int lanai_dev_open(struct atm_dev *atmdev)
 	conf1_write(lanai);
 #endif
 	iounmap(lanai->base);
+	lanai->base = NULL;
     error_pci:
 	pci_disable_device(lanai->pci);
     error:
@@ -2252,6 +2253,8 @@ static int lanai_dev_open(struct atm_dev *atmdev)
 static void lanai_dev_close(struct atm_dev *atmdev)
 {
 	struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
+	if (lanai->base==NULL)
+		return;
 	printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n",
 	    lanai->number);
 	lanai_timed_poll_stop(lanai);
@@ -2561,7 +2564,7 @@ static int lanai_init_one(struct pci_dev *pci,
 	struct atm_dev *atmdev;
 	int result;
 
-	lanai = kmalloc(sizeof(*lanai), GFP_KERNEL);
+	lanai = kzalloc(sizeof(*lanai), GFP_KERNEL);
 	if (lanai == NULL) {
 		printk(KERN_ERR DEV_LABEL
 		       ": couldn't allocate dev_data structure!\n");
-- 
2.30.1

[PATCH AUTOSEL 4.14 05/21] Revert "r8152: adjust the settings about MAC clock speed down for RTL8153"

[Sasha Levin]

From: Hayes Wang <hayeswang@realtek.com>

[ Upstream commit 4b5dc1a94d4f92b5845e98bd9ae344b26d933aad ]

This reverts commit 134f98bcf1b898fb9d6f2b91bc85dd2e5478b4b8.

The r8153_mac_clk_spd() is used for RTL8153A only, because the register
table of RTL8153B is different from RTL8153A. However, this function would
be called when RTL8153B calls r8153_first_init() and r8153_enter_oob().
That causes RTL8153B becomes unstable when suspending and resuming. The
worst case may let the device stop working.

Besides, revert this commit to disable MAC clock speed down for RTL8153A.
It would avoid the known issue when enabling U1. The data of the first
control transfer may be wrong when exiting U1.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 35 ++++++-----------------------------
 1 file changed, 6 insertions(+), 29 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index bd91d4bad49b..f9c531a6ce06 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2588,29 +2588,6 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
 		device_set_wakeup_enable(&tp->udev->dev, false);
 }
 
-static void r8153_mac_clk_spd(struct r8152 *tp, bool enable)
-{
-	/* MAC clock speed down */
-	if (enable) {
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL,
-			       ALDPS_SPDWN_RATIO);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2,
-			       EEE_SPDWN_RATIO);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
-			       PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN |
-			       U1U2_SPDWN_EN | L1_SPDWN_EN);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
-			       PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN |
-			       TP100_SPDWN_EN | TP500_SPDWN_EN | EEE_SPDWN_EN |
-			       TP1000_SPDWN_EN);
-	} else {
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0);
-		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0);
-	}
-}
-
 static void r8153_u1u2en(struct r8152 *tp, bool enable)
 {
 	u8 u1u2[8];
@@ -2841,11 +2818,9 @@ static void rtl8153_runtime_enable(struct r8152 *tp, bool enable)
 	if (enable) {
 		r8153_u1u2en(tp, false);
 		r8153_u2p3en(tp, false);
-		r8153_mac_clk_spd(tp, true);
 		rtl_runtime_suspend_enable(tp, true);
 	} else {
 		rtl_runtime_suspend_enable(tp, false);
-		r8153_mac_clk_spd(tp, false);
 
 		switch (tp->version) {
 		case RTL_VER_03:
@@ -3407,7 +3382,6 @@ static void r8153_first_init(struct r8152 *tp)
 	u32 ocp_data;
 	int i;
 
-	r8153_mac_clk_spd(tp, false);
 	rxdy_gated_en(tp, true);
 	r8153_teredo_off(tp);
 
@@ -3469,8 +3443,6 @@ static void r8153_enter_oob(struct r8152 *tp)
 	u32 ocp_data;
 	int i;
 
-	r8153_mac_clk_spd(tp, true);
-
 	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
 	ocp_data &= ~NOW_IS_OOB;
 	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
@@ -4134,9 +4106,14 @@ static void r8153_init(struct r8152 *tp)
 
 	ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
 
+	/* MAC clock speed down */
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, 0);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0);
+
 	r8153_power_cut_en(tp, false);
 	r8153_u1u2en(tp, true);
-	r8153_mac_clk_spd(tp, false);
 	usb_enable_lpm(tp->udev);
 
 	/* rx aggregation */
-- 
2.30.1

[PATCH AUTOSEL 4.14 06/21] ixgbe: Fix memleak in ixgbe_configure_clsu32

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 7a766381634da19fc837619b0a34590498d9d29a ]

When ixgbe_fdir_write_perfect_filter_82599() fails,
input allocated by kzalloc() has not been freed,
which leads to memleak.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 9c3fa0b55551..e9205c893531 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -9266,8 +9266,10 @@ static int ixgbe_configure_clsu32(struct ixgbe_adapter *adapter,
 	ixgbe_atr_compute_perfect_hash_82599(&input->filter, mask);
 	err = ixgbe_fdir_write_perfect_filter_82599(hw, &input->filter,
 						    input->sw_idx, queue);
-	if (!err)
-		ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx);
+	if (err)
+		goto err_out_w_lock;
+
+	ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx);
 	spin_unlock(&adapter->fdir_perfect_lock);
 
 	if ((uhtid != 0x800) && (adapter->jump_tables[uhtid]))
-- 
2.30.1

[PATCH AUTOSEL 4.14 07/21] net: tehuti: fix error return code in bdx_probe()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 38c26ff3048af50eee3fcd591921357ee5bfd9ee ]

When bdx_read_mac() fails, no error return code of bdx_probe()
is assigned.
To fix this bug, err is assigned with -EFAULT as error return code.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/tehuti/tehuti.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c
index 163d8d16bc24..75620c3365b3 100644
--- a/drivers/net/ethernet/tehuti/tehuti.c
+++ b/drivers/net/ethernet/tehuti/tehuti.c
@@ -2058,6 +2058,7 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		/*bdx_hw_reset(priv); */
 		if (bdx_read_mac(priv)) {
 			pr_err("load MAC address failed\n");
+			err = -EFAULT;
 			goto err_out_iomap;
 		}
 		SET_NETDEV_DEV(ndev, &pdev->dev);
-- 
2.30.1

[PATCH AUTOSEL 4.14 08/21] sun/niu: fix wrong RXMAC_BC_FRM_CNT_COUNT count

[Sasha Levin]

From: Denis Efremov <efremov@linux.com>

[ Upstream commit 155b23e6e53475ca3b8c2a946299b4d4dd6a5a1e ]

RXMAC_BC_FRM_CNT_COUNT added to mp->rx_bcasts twice in a row
in niu_xmac_interrupt(). Remove the second addition.

Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sun/niu.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
index 411a69bea1d4..32ab44d00790 100644
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -3948,8 +3948,6 @@ static void niu_xmac_interrupt(struct niu *np)
 		mp->rx_mcasts += RXMAC_MC_FRM_CNT_COUNT;
 	if (val & XRXMAC_STATUS_RXBCAST_CNT_EXP)
 		mp->rx_bcasts += RXMAC_BC_FRM_CNT_COUNT;
-	if (val & XRXMAC_STATUS_RXBCAST_CNT_EXP)
-		mp->rx_bcasts += RXMAC_BC_FRM_CNT_COUNT;
 	if (val & XRXMAC_STATUS_RXHIST1_CNT_EXP)
 		mp->rx_hist_cnt1 += RXMAC_HIST_CNT1_COUNT;
 	if (val & XRXMAC_STATUS_RXHIST2_CNT_EXP)
-- 
2.30.1

[PATCH AUTOSEL 4.14 12/21] net: hisilicon: hns: fix error return code of hns_nic_clear_all_rx_fetch()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 143c253f42bad20357e7e4432087aca747c43384 ]

When hns_assemble_skb() returns NULL to skb, no error return code of
hns_nic_clear_all_rx_fetch() is assigned.
To fix this bug, ret is assigned with -ENOMEM in this case.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index af832929ae28..5ddc09e9b5a6 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -1812,8 +1812,10 @@ static int hns_nic_clear_all_rx_fetch(struct net_device *ndev)
 			for (j = 0; j < fetch_num; j++) {
 				/* alloc one skb and init */
 				skb = hns_assemble_skb(ndev);
-				if (!skb)
+				if (!skb) {
+					ret = -ENOMEM;
 					goto out;
+				}
 				rd = &tx_ring_data(priv, skb->queue_mapping);
 				hns_nic_net_xmit_hw(ndev, skb, rd);
 
-- 
2.30.1

[PATCH AUTOSEL 4.14 13/21] net: wan: fix error return code of uhdlc_init()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 62765d39553cfd1ad340124fe1e280450e8c89e2 ]

When priv->rx_skbuff or priv->tx_skbuff is NULL, no error return code of
uhdlc_init() is assigned.
To fix this bug, ret is assigned with -ENOMEM in these cases.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/fsl_ucc_hdlc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index 6a26cef62193..978f642daced 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -200,13 +200,17 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
 
 	priv->rx_skbuff = kzalloc(priv->rx_ring_size * sizeof(*priv->rx_skbuff),
 				  GFP_KERNEL);
-	if (!priv->rx_skbuff)
+	if (!priv->rx_skbuff) {
+		ret = -ENOMEM;
 		goto free_ucc_pram;
+	}
 
 	priv->tx_skbuff = kzalloc(priv->tx_ring_size * sizeof(*priv->tx_skbuff),
 				  GFP_KERNEL);
-	if (!priv->tx_skbuff)
+	if (!priv->tx_skbuff) {
+		ret = -ENOMEM;
 		goto free_rx_skbuff;
+	}
 
 	priv->skb_curtx = 0;
 	priv->skb_dirtytx = 0;
-- 
2.30.1

[PATCH AUTOSEL 4.14 14/21] atm: uPD98402: fix incorrect allocation

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit 3153724fc084d8ef640c611f269ddfb576d1dcb1 ]

dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this
dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock
(i.e dev->phy_data->lock) will result in a null-ptr-dereference.

I believe this is a typo and what it actually want to do is to allocate
phy_data instead of dev_data.

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/uPD98402.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/uPD98402.c b/drivers/atm/uPD98402.c
index 4fa13a807873..cf517fd148ea 100644
--- a/drivers/atm/uPD98402.c
+++ b/drivers/atm/uPD98402.c
@@ -210,7 +210,7 @@ static void uPD98402_int(struct atm_dev *dev)
 static int uPD98402_start(struct atm_dev *dev)
 {
 	DPRINTK("phy_start\n");
-	if (!(dev->dev_data = kmalloc(sizeof(struct uPD98402_priv),GFP_KERNEL)))
+	if (!(dev->phy_data = kmalloc(sizeof(struct uPD98402_priv),GFP_KERNEL)))
 		return -ENOMEM;
 	spin_lock_init(&PRIV(dev)->lock);
 	memset(&PRIV(dev)->sonet_stats,0,sizeof(struct k_sonet_stats));
-- 
2.30.1

[PATCH AUTOSEL 4.14 15/21] atm: idt77252: fix null-ptr-dereference

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit 4416e98594dc04590ebc498fc4e530009535c511 ]

this one is similar to the phy_data allocation fix in uPD98402, the
driver allocate the idt77105_priv and store to dev_data but later
dereference using dev->dev_data, which will cause null-ptr-dereference.

fix this issue by changing dev_data to phy_data so that PRIV(dev) can
work correctly.

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/idt77105.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/atm/idt77105.c b/drivers/atm/idt77105.c
index 082aa02abc57..be3ba90b76b9 100644
--- a/drivers/atm/idt77105.c
+++ b/drivers/atm/idt77105.c
@@ -261,7 +261,7 @@ static int idt77105_start(struct atm_dev *dev)
 {
 	unsigned long flags;
 
-	if (!(dev->dev_data = kmalloc(sizeof(struct idt77105_priv),GFP_KERNEL)))
+	if (!(dev->phy_data = kmalloc(sizeof(struct idt77105_priv),GFP_KERNEL)))
 		return -ENOMEM;
 	PRIV(dev)->dev = dev;
 	spin_lock_irqsave(&idt77105_priv_lock, flags);
@@ -338,7 +338,7 @@ static int idt77105_stop(struct atm_dev *dev)
                 else
                     idt77105_all = walk->next;
 	        dev->phy = NULL;
-                dev->dev_data = NULL;
+                dev->phy_data = NULL;
                 kfree(walk);
                 break;
             }
-- 
2.30.1