[PATCH AUTOSEL 4.14 02/12] net: pxa168_eth: Fix a potential data race in pxa168_eth_remove

[PATCH AUTOSEL 4.14 02/12] net: pxa168_eth: Fix a potential data race in pxa168_eth_remove

[Sasha Levin]

From: Pavel Andrianov <andrianov@ispras.ru>

[ Upstream commit 0571a753cb07982cc82f4a5115e0b321da89e1f3 ]

pxa168_eth_remove() firstly calls unregister_netdev(),
then cancels a timeout work. unregister_netdev() shuts down a device
interface and removes it from the kernel tables. If the timeout occurs
in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop
and open of the device. It may lead to an inconsistent state and memory
leaks.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Pavel Andrianov <andrianov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/pxa168_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 993724959a7c..1883f0d076e3 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -1553,8 +1553,8 @@ static int pxa168_eth_remove(struct platform_device *pdev)
 
 	mdiobus_unregister(pep->smi_bus);
 	mdiobus_free(pep->smi_bus);
-	unregister_netdev(dev);
 	cancel_work_sync(&pep->tx_timeout_task);
+	unregister_netdev(dev);
 	free_netdev(dev);
 	return 0;
 }
-- 
2.30.1

[PATCH AUTOSEL 4.14 03/12] mISDN: fix crash in fritzpci

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit a9f81244d2e33e6dfcef120fefd30c96b3f7cdb0 ]

setup_fritz() in avmfritz.c might fail with -EIO and in this case the
isac.type and isac.write_reg is not initialized and remains 0(NULL).
A subsequent call to isac_release() will dereference isac->write_reg and
crash.

[    1.737444] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.737809] #PF: supervisor instruction fetch in kernel mode
[    1.738106] #PF: error_code(0x0010) - not-present page
[    1.738378] PGD 0 P4D 0
[    1.738515] Oops: 0010 [#1] SMP NOPTI
[    1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78
[    1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-p
rebuilt.qemu.org 04/01/2014
[    1.739664] RIP: 0010:0x0
[    1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[    1.740200] RSP: 0018:ffffc9000027ba10 EFLAGS: 00010202
[    1.740478] RAX: 0000000000000000 RBX: ffff888102f41840 RCX: 0000000000000027
[    1.740853] RDX: 00000000000000ff RSI: 0000000000000020 RDI: ffff888102f41800
[    1.741226] RBP: ffffc9000027ba20 R08: ffff88817bc18440 R09: ffffc9000027b808
[    1.741600] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888102f41840
[    1.741976] R13: 00000000fffffffb R14: ffff888102f41800 R15: ffff8881008b0000
[    1.742351] FS:  00007fda3a38a8c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000
[    1.742774] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.743076] CR2: ffffffffffffffd6 CR3: 00000001021ec000 CR4: 00000000000006f0
[    1.743452] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    1.743828] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    1.744206] Call Trace:
[    1.744339]  isac_release+0xcc/0xe0 [mISDNipac]
[    1.744582]  fritzpci_probe.cold+0x282/0x739 [avmfritz]
[    1.744861]  local_pci_probe+0x48/0x80
[    1.745063]  pci_device_probe+0x10f/0x1c0
[    1.745278]  really_probe+0xfb/0x420
[    1.745471]  driver_probe_device+0xe9/0x160
[    1.745693]  device_driver_attach+0x5d/0x70
[    1.745917]  __driver_attach+0x8f/0x150
[    1.746123]  ? device_driver_attach+0x70/0x70
[    1.746354]  bus_for_each_dev+0x7e/0xc0
[    1.746560]  driver_attach+0x1e/0x20
[    1.746751]  bus_add_driver+0x152/0x1f0
[    1.746957]  driver_register+0x74/0xd0
[    1.747157]  ? 0xffffffffc00d8000
[    1.747334]  __pci_register_driver+0x54/0x60
[    1.747562]  AVM_init+0x36/0x1000 [avmfritz]
[    1.747791]  do_one_initcall+0x48/0x1d0
[    1.747997]  ? __cond_resched+0x19/0x30
[    1.748206]  ? kmem_cache_alloc_trace+0x390/0x440
[    1.748458]  ? do_init_module+0x28/0x250
[    1.748669]  do_init_module+0x62/0x250
[    1.748870]  load_module+0x23ee/0x26a0
[    1.749073]  __do_sys_finit_module+0xc2/0x120
[    1.749307]  ? __do_sys_finit_module+0xc2/0x120
[    1.749549]  __x64_sys_finit_module+0x1a/0x20
[    1.749782]  do_syscall_64+0x38/0x90

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/mISDNipac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
index e240010b93fa..c87cb193830c 100644
--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -711,7 +711,7 @@ isac_release(struct isac_hw *isac)
 {
 	if (isac->type & IPAC_TYPE_ISACX)
 		WriteISAC(isac, ISACX_MASK, 0xff);
-	else
+	else if (isac->type != 0)
 		WriteISAC(isac, ISAC_MASK, 0xff);
 	if (isac->dch.timer.function != NULL) {
 		del_timer(&isac->dch.timer);
-- 
2.30.1

[PATCH AUTOSEL 4.14 04/12] mac80211: fix double free in ibss_leave

[Sasha Levin]

From: Markus Theil <markus.theil@tu-ilmenau.de>

[ Upstream commit 3bd801b14e0c5d29eeddc7336558beb3344efaa3 ]

Clear beacon ie pointer and ie length after free
in order to prevent double free.

==================================================================
BUG: KASAN: double-free or invalid-free \
in ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876

CPU: 0 PID: 8472 Comm: syz-executor100 Not tainted 5.11.0-rc6-syzkaller #0
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 print_address_description.constprop.0.cold+0x5b/0x2c6 mm/kasan/report.c:230
 kasan_report_invalid_free+0x51/0x80 mm/kasan/report.c:355
 ____kasan_slab_free+0xcc/0xe0 mm/kasan/common.c:341
 kasan_slab_free include/linux/kasan.h:192 [inline]
 __cache_free mm/slab.c:3424 [inline]
 kfree+0xed/0x270 mm/slab.c:3760
 ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876
 rdev_leave_ibss net/wireless/rdev-ops.h:545 [inline]
 __cfg80211_leave_ibss+0x19a/0x4c0 net/wireless/ibss.c:212
 __cfg80211_leave+0x327/0x430 net/wireless/core.c:1172
 cfg80211_leave net/wireless/core.c:1221 [inline]
 cfg80211_netdev_notifier_call+0x9e8/0x12c0 net/wireless/core.c:1335
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2040
 call_netdevice_notifiers_extack net/core/dev.c:2052 [inline]
 call_netdevice_notifiers net/core/dev.c:2066 [inline]
 __dev_close_many+0xee/0x2e0 net/core/dev.c:1586
 __dev_close net/core/dev.c:1624 [inline]
 __dev_change_flags+0x2cb/0x730 net/core/dev.c:8476
 dev_change_flags+0x8a/0x160 net/core/dev.c:8549
 dev_ifsioc+0x210/0xa70 net/core/dev_ioctl.c:265
 dev_ioctl+0x1b1/0xc40 net/core/dev_ioctl.c:511
 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
 sock_ioctl+0x477/0x6a0 net/socket.c:1177
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+93976391bf299d425f44@syzkaller.appspotmail.com
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20210213133653.367130-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ibss.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 3d0d12fbd8dd..e550154b12df 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -1861,6 +1861,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata)
 
 	/* remove beacon */
 	kfree(sdata->u.ibss.ie);
+	sdata->u.ibss.ie = NULL;
+	sdata->u.ibss.ie_len = 0;
 
 	/* on the next join, re-program HT parameters */
 	memset(&ifibss->ht_capa, 0, sizeof(ifibss->ht_capa));
-- 
2.30.1

[PATCH AUTOSEL 4.14 05/12] mac80211: choose first enabled channel for monitor

[Sasha Levin]

From: Karthikeyan Kathirvel <kathirve@codeaurora.org>

[ Upstream commit 041c881a0ba8a75f71118bd9766b78f04beed469 ]

Even if the first channel from sband channel list is invalid
or disabled mac80211 ends up choosing it as the default channel
for monitor interfaces, making them not usable.

Fix this by assigning the first available valid or enabled
channel instead.

Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeaurora.org
[reword commit message, comment, code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/main.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 8a51f94ec1ce..2136ce3b4489 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -913,8 +913,19 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 			continue;
 
 		if (!dflt_chandef.chan) {
+			/*
+			 * Assign the first enabled channel to dflt_chandef
+			 * from the list of channels
+			 */
+			for (i = 0; i < sband->n_channels; i++)
+				if (!(sband->channels[i].flags &
+						IEEE80211_CHAN_DISABLED))
+					break;
+			/* if none found then use the first anyway */
+			if (i == sband->n_channels)
+				i = 0;
 			cfg80211_chandef_create(&dflt_chandef,
-						&sband->channels[0],
+						&sband->channels[i],
 						NL80211_CHAN_NO_HT);
 			/* init channel we're on */
 			if (!local->use_chanctx && !local->_oper_chandef.chan) {
-- 
2.30.1