From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>,
kernel test robot <lkp@intel.com>
Subject: [net-next 11/39] can: grcan: add missing Kconfig dependency to HAS_IOMEM
Date: Tue, 30 Mar 2021 13:45:31 +0200 [thread overview]
Message-ID: <20210330114559.1114855-12-mkl@pengutronix.de> (raw)
In-Reply-To: <20210330114559.1114855-1-mkl@pengutronix.de>
On ARCHs without IOMEM support the grcan driver fails to link due to
missing iomem functionality. This patch adds the missing Kconfig
dependency to HAS_IOMEM.
Link: https://lore.kernel.org/r/20210309140424.3331010-1-mkl@pengutronix.de
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 1c28eade6bec..e355d3974977 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -103,7 +103,7 @@ config CAN_FLEXCAN
config CAN_GRCAN
tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices"
- depends on OF && HAS_DMA
+ depends on OF && HAS_DMA && HAS_IOMEM
help
Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN.
Note that the driver supports little endian, even though little
--
2.30.2
next prev parent reply other threads:[~2021-03-30 11:47 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-30 11:45 pull-request: can-next 2021-03-30 Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 01/39] MAINTAINERS: remove Dan Murphy from m_can and tcan4x5x Marc Kleine-Budde
2021-03-30 20:10 ` patchwork-bot+netdevbpf
2021-03-30 11:45 ` [net-next 02/39] MAINTAINERS: Update MCAN MMIO device driver maintainer Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 03/39] can: dev: always create TX echo skb Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 04/39] can: dev: can_free_echo_skb(): don't crash the kernel if can_priv::echo_skb is accessed out of bounds Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 05/39] can: dev: can_free_echo_skb(): extend to return can frame length Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 06/39] can: add new CAN FD bittiming parameters: Transmitter Delay Compensation (TDC) Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 07/39] can: dev: reorder struct can_priv members for better packing Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 08/39] can: netlink: move '=' operators back to previous line (checkpatch fix) Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 09/39] can: bittiming: add calculation for CAN FD Transmitter Delay Compensation (TDC) Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 10/39] can: bittiming: add CAN_KBPS, CAN_MBPS and CAN_MHZ macros Marc Kleine-Budde
2021-03-30 11:45 ` Marc Kleine-Budde [this message]
2021-03-30 11:45 ` [net-next 12/39] can: xilinx_can: Simplify code by using dev_err_probe() Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 13/39] can: ucan: fix alignment constraints Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 14/39] can: peak_usb: pcan_usb_pro_encode_msg(): use macros for flags instead of plain integers Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 15/39] can: peak_usb: add support of ethtool set_phys_id() Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 16/39] can: peak_usb: add support of ONE_SHOT mode Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 17/39] can: m_can: m_can_class_allocate_dev(): remove impossible error return judgment Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 18/39] can: m_can: add infrastructure for internal timestamps Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 19/39] can: m_can: m_can_chip_config(): enable and configure " Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 20/39] can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 21/39] can: tcan4x5x: remove duplicate include of regmap.h Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 22/39] can: mcp251xfd: add dev coredump support Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 23/39] can: mcp251xfd: simplify UINC handling Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 24/39] can: mcp251xfd: move netdevice.h to mcp251xfd.h Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 25/39] can: mcp251xfd: mcp251xfd_get_timestamp(): move " Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 26/39] can: mcp251xfd: add HW timestamp infrastructure Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 27/39] can: mcp251xfd: add HW timestamp to RX, TX and error CAN frames Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 28/39] can: c_can: convert block comments to network style comments Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 29/39] can: c_can: remove unnecessary blank lines and add suggested ones Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 30/39] can: c_can: fix indention Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 31/39] can: c_can: fix print formating string Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 32/39] can: c_can: replace double assignments by two single ones Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 33/39] can: c_can: fix remaining checkpatch warnings Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 34/39] can: c_can: remove unused code Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 35/39] can: c_can: fix indentation Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 36/39] can: c_can: add a comment about IF_RX interface's use Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 37/39] can: c_can: use 32-bit write to set arbitration register Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 38/39] can: c_can: prepare to up the message objects number Marc Kleine-Budde
2021-03-30 11:45 ` [net-next 39/39] can: c_can: add support to 64 message objects Marc Kleine-Budde
2021-03-30 20:10 ` pull-request: can-next 2021-03-30 patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210330114559.1114855-12-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=lkp@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).