[PATCH AUTOSEL 4.14 02/25] tipc: convert dest node's address to network order

[PATCH AUTOSEL 4.14 02/25] tipc: convert dest node's address to network order

[Sasha Levin]

From: Hoang Le <hoang.h.le@dektech.com.au>

[ Upstream commit 1980d37565061ab44bdc2f9e4da477d3b9752e81 ]

(struct tipc_link_info)->dest is in network order (__be32), so we must
convert the value to network order before assigning. The problem detected
by sparse:

net/tipc/netlink_compat.c:699:24: warning: incorrect type in assignment (different base types)
net/tipc/netlink_compat.c:699:24:    expected restricted __be32 [usertype] dest
net/tipc/netlink_compat.c:699:24:    got int

Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/netlink_compat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c
index 99c69489bb44..9aa0d789d25e 100644
--- a/net/tipc/netlink_compat.c
+++ b/net/tipc/netlink_compat.c
@@ -662,7 +662,7 @@ static int tipc_nl_compat_link_dump(struct tipc_nl_compat_msg *msg,
 	if (err)
 		return err;
 
-	link_info.dest = nla_get_flag(link[TIPC_NLA_LINK_DEST]);
+	link_info.dest = htonl(nla_get_flag(link[TIPC_NLA_LINK_DEST]));
 	link_info.up = htonl(nla_get_flag(link[TIPC_NLA_LINK_UP]));
 	nla_strlcpy(link_info.str, link[TIPC_NLA_LINK_NAME],
 		    TIPC_MAX_LINK_NAME);
-- 
2.30.2

[PATCH AUTOSEL 4.14 03/25] net: stmmac: Set FIFO sizes for ipq806x

[Sasha Levin]

From: Jonathan McDowell <noodles@earth.li>

[ Upstream commit e127906b68b49ddb3ecba39ffa36a329c48197d3 ]

Commit eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values")
started using the TX FIFO size to verify what counts as a valid MTU
request for the stmmac driver.  This is unset for the ipq806x variant.
Looking at older patches for this it seems the RX + TXs buffers can be
up to 8k, so set appropriately.

(I sent this as an RFC patch in June last year, but received no replies.
I've been running with this on my hardware (a MikroTik RB3011) since
then with larger MTUs to support both the internal qca8k switch and
VLANs with no problems. Without the patch it's impossible to set the
larger MTU required to support this.)

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index 1924788d28da..f4ff43a1b5ba 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -363,6 +363,8 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 	plat_dat->bsp_priv = gmac;
 	plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
 	plat_dat->multicast_filter_bins = 0;
+	plat_dat->tx_fifo_size = 8192;
+	plat_dat->rx_fifo_size = 8192;
 
 	err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (err)
-- 
2.30.2

[PATCH AUTOSEL 4.14 07/25] Bluetooth: Set CONF_NOT_COMPLETE as l2cap_chan default

[Sasha Levin]

From: Archie Pusaka <apusaka@chromium.org>

[ Upstream commit 3a9d54b1947ecea8eea9a902c0b7eb58a98add8a ]

Currently l2cap_chan_set_defaults() reset chan->conf_state to zero.
However, there is a flag CONF_NOT_COMPLETE which is set when
creating the l2cap_chan. It is suggested that the flag should be
cleared when l2cap_chan is ready, but when l2cap_chan_set_defaults()
is called, l2cap_chan is not yet ready. Therefore, we must set this
flag as the default.

Example crash call trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
panic+0x1c6/0x38b kernel/panic.c:117
__warn+0x170/0x1b9 kernel/panic.c:471
warn_slowpath_fmt+0xc7/0xf8 kernel/panic.c:494
debug_print_object+0x175/0x193 lib/debugobjects.c:260
debug_object_assert_init+0x171/0x1bf lib/debugobjects.c:614
debug_timer_assert_init kernel/time/timer.c:629 [inline]
debug_assert_init kernel/time/timer.c:677 [inline]
del_timer+0x7c/0x179 kernel/time/timer.c:1034
try_to_grab_pending+0x81/0x2e5 kernel/workqueue.c:1230
cancel_delayed_work+0x7c/0x1c4 kernel/workqueue.c:2929
l2cap_clear_timer+0x1e/0x41 include/net/bluetooth/l2cap.h:834
l2cap_chan_del+0x2d8/0x37e net/bluetooth/l2cap_core.c:640
l2cap_chan_close+0x532/0x5d8 net/bluetooth/l2cap_core.c:756
l2cap_sock_shutdown+0x806/0x969 net/bluetooth/l2cap_sock.c:1174
l2cap_sock_release+0x64/0x14d net/bluetooth/l2cap_sock.c:1217
__sock_release+0xda/0x217 net/socket.c:580
sock_close+0x1b/0x1f net/socket.c:1039
__fput+0x322/0x55c fs/file_table.c:208
____fput+0x17/0x19 fs/file_table.c:244
task_work_run+0x19b/0x1d3 kernel/task_work.c:115
exit_task_work include/linux/task_work.h:21 [inline]
do_exit+0xe4c/0x204a kernel/exit.c:766
do_group_exit+0x291/0x291 kernel/exit.c:891
get_signal+0x749/0x1093 kernel/signal.c:2396
do_signal+0xa5/0xcdb arch/x86/kernel/signal.c:737
exit_to_usermode_loop arch/x86/entry/common.c:243 [inline]
prepare_exit_to_usermode+0xed/0x235 arch/x86/entry/common.c:277
syscall_return_slowpath+0x3a7/0x3b3 arch/x86/entry/common.c:348
int_ret_from_sys_call+0x25/0xa3

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+338f014a98367a08a114@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index df8cc639c46d..b5a7d04066ec 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -510,7 +510,9 @@ void l2cap_chan_set_defaults(struct l2cap_chan *chan)
 	chan->flush_to = L2CAP_DEFAULT_FLUSH_TO;
 	chan->retrans_timeout = L2CAP_DEFAULT_RETRANS_TO;
 	chan->monitor_timeout = L2CAP_DEFAULT_MONITOR_TO;
+
 	chan->conf_state = 0;
+	set_bit(CONF_NOT_COMPLETE, &chan->conf_state);
 
 	set_bit(FLAG_FORCE_ACTIVE, &chan->flags);
 }
-- 
2.30.2

[PATCH AUTOSEL 4.14 08/25] Bluetooth: verify AMP hci_chan before amp_destroy

[Sasha Levin]

From: Archie Pusaka <apusaka@chromium.org>

[ Upstream commit 5c4c8c9544099bb9043a10a5318130a943e32fc3 ]

hci_chan can be created in 2 places: hci_loglink_complete_evt() if
it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory,
Only AMP hci_chan should be removed by a call to
hci_disconn_loglink_complete_evt(). However, the controller might mess
up, call that function, and destroy an hci_chan which is not initiated
by hci_loglink_complete_evt().

This patch adds a verification that the destroyed hci_chan must have
been init'd by hci_loglink_complete_evt().

Example crash call trace:
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xe3/0x144 lib/dump_stack.c:118
 print_address_description+0x67/0x22a mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report mm/kasan/report.c:412 [inline]
 kasan_report+0x251/0x28f mm/kasan/report.c:396
 hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072
 l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877
 l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661
 l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline]
 l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline]
 l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline]
 l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline]
 l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023
 l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596
 hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline]
 hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

Allocated by task 38:
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553
 kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787
 kmalloc include/linux/slab.h:515 [inline]
 kzalloc include/linux/slab.h:709 [inline]
 hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674
 l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062
 l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline]
 l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381
 hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404
 hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline]
 hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981
 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

Freed by task 1732:
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free mm/kasan/kasan.c:521 [inline]
 __kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493
 slab_free_hook mm/slub.c:1409 [inline]
 slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436
 slab_free mm/slub.c:3009 [inline]
 kfree+0x182/0x21e mm/slub.c:3972
 hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline]
 hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050
 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

The buggy address belongs to the object at ffff8881d7af9180
 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 24 bytes inside of
 128-byte region [ffff8881d7af9180, ffff8881d7af9200)
The buggy address belongs to the page:
page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0
flags: 0x8000000000000200(slab)
raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200
raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
 ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                            ^
 ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci_core.h | 1 +
 net/bluetooth/hci_event.c        | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index f80356a98081..0cc5e2b4bbf4 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -514,6 +514,7 @@ struct hci_chan {
 	struct sk_buff_head data_q;
 	unsigned int	sent;
 	__u8		state;
+	bool		amp;
 };
 
 struct hci_conn_params {
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 5e05a96e0646..b3253f2e11af 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4399,6 +4399,7 @@ static void hci_loglink_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
 		return;
 
 	hchan->handle = le16_to_cpu(ev->handle);
+	hchan->amp = true;
 
 	BT_DBG("hcon %p mgr %p hchan %p", hcon, hcon->amp_mgr, hchan);
 
@@ -4431,7 +4432,7 @@ static void hci_disconn_loglink_complete_evt(struct hci_dev *hdev,
 	hci_dev_lock(hdev);
 
 	hchan = hci_chan_lookup_handle(hdev, le16_to_cpu(ev->handle));
-	if (!hchan)
+	if (!hchan || !hchan->amp)
 		goto unlock;
 
 	amp_destroy_logical_link(hchan, ev->reason);
-- 
2.30.2

[PATCH AUTOSEL 4.14 09/25] Bluetooth: initialize skb_queue_head at l2cap_chan_create()

[Sasha Levin]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit be8597239379f0f53c9710dd6ab551bbf535bec6 ]

syzbot is hitting "INFO: trying to register non-static key." message [1],
for "struct l2cap_chan"->tx_q.lock spinlock is not yet initialized when
l2cap_chan_del() is called due to e.g. timeout.

Since "struct l2cap_chan"->lock mutex is initialized at l2cap_chan_create()
immediately after "struct l2cap_chan" is allocated using kzalloc(), let's
as well initialize "struct l2cap_chan"->{tx_q,srej_q}.lock spinlocks there.

[1] https://syzkaller.appspot.com/bug?extid=fadfba6a911f6bf71842

Reported-and-tested-by: syzbot <syzbot+fadfba6a911f6bf71842@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index b5a7d04066ec..460401349255 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -445,6 +445,8 @@ struct l2cap_chan *l2cap_chan_create(void)
 	if (!chan)
 		return NULL;
 
+	skb_queue_head_init(&chan->tx_q);
+	skb_queue_head_init(&chan->srej_q);
 	mutex_init(&chan->lock);
 
 	/* Set default lock nesting level */
-- 
2.30.2

[PATCH AUTOSEL 4.14 10/25] Bluetooth: check for zapped sk before connecting

[Sasha Levin]

From: Archie Pusaka <apusaka@chromium.org>

[ Upstream commit 3af70b39fa2d415dc86c370e5b24ddb9fdacbd6f ]

There is a possibility of receiving a zapped sock on
l2cap_sock_connect(). This could lead to interesting crashes, one
such case is tearing down an already tore l2cap_sock as is happened
with this call trace:

__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
register_lock_class kernel/locking/lockdep.c:792 [inline]
register_lock_class+0x239/0x6f6 kernel/locking/lockdep.c:742
__lock_acquire+0x209/0x1e27 kernel/locking/lockdep.c:3105
lock_acquire+0x29c/0x2fb kernel/locking/lockdep.c:3599
__raw_spin_lock_bh include/linux/spinlock_api_smp.h:137 [inline]
_raw_spin_lock_bh+0x38/0x47 kernel/locking/spinlock.c:175
spin_lock_bh include/linux/spinlock.h:307 [inline]
lock_sock_nested+0x44/0xfa net/core/sock.c:2518
l2cap_sock_teardown_cb+0x88/0x2fb net/bluetooth/l2cap_sock.c:1345
l2cap_chan_del+0xa3/0x383 net/bluetooth/l2cap_core.c:598
l2cap_chan_close+0x537/0x5dd net/bluetooth/l2cap_core.c:756
l2cap_chan_timeout+0x104/0x17e net/bluetooth/l2cap_core.c:429
process_one_work+0x7e3/0xcb0 kernel/workqueue.c:2064
worker_thread+0x5a5/0x773 kernel/workqueue.c:2196
kthread+0x291/0x2a6 kernel/kthread.c:211
ret_from_fork+0x4e/0x80 arch/x86/entry/entry_64.S:604

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+abfc0f5e668d4099af73@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_sock.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index f94b14beba2b..3905af1d300f 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -179,9 +179,17 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr,
 	struct l2cap_chan *chan = l2cap_pi(sk)->chan;
 	struct sockaddr_l2 la;
 	int len, err = 0;
+	bool zapped;
 
 	BT_DBG("sk %p", sk);
 
+	lock_sock(sk);
+	zapped = sock_flag(sk, SOCK_ZAPPED);
+	release_sock(sk);
+
+	if (zapped)
+		return -EINVAL;
+
 	if (!addr || alen < offsetofend(struct sockaddr, sa_family) ||
 	    addr->sa_family != AF_BLUETOOTH)
 		return -EINVAL;
-- 
2.30.2

[PATCH AUTOSEL 4.14 11/25] ip6_vti: proper dev_{hold|put} in ndo_[un]init methods

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 40cb881b5aaa0b69a7d93dec8440d5c62dae299f ]

After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]

Issue here is that:

- all dev_put() should be paired with a corresponding prior dev_hold().

- A driver doing a dev_put() in its ndo_uninit() MUST also
  do a dev_hold() in its ndo_init(), only when ndo_init()
  is returning 0.

Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.

Therefore, we need to move dev_hold() call from
vti6_tnl_create2() to vti6_dev_init_gen()

[1]
WARNING: CPU: 0 PID: 15951 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 15951 Comm: syz-executor.3 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc90001eaef28 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815c51f5 RDI: fffff520003d5dd7
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff88801bb1c568
R13: ffff88801f69e800 R14: 00000000ffffffff R15: ffff888050889d40
FS:  00007fc79314e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1c1ff47108 CR3: 0000000020fd5000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __refcount_dec include/linux/refcount.h:344 [inline]
 refcount_dec include/linux/refcount.h:359 [inline]
 dev_put include/linux/netdevice.h:4135 [inline]
 vti6_dev_uninit+0x31a/0x360 net/ipv6/ip6_vti.c:297
 register_netdevice+0xadf/0x1500 net/core/dev.c:10308
 vti6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_vti.c:190
 vti6_newlink+0x9d/0xd0 net/ipv6/ip6_vti.c:1020
 __rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x331/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmmsg+0x195/0x470 net/socket.c:2490
 __do_sys_sendmmsg net/socket.c:2519 [inline]
 __se_sys_sendmmsg net/socket.c:2516 [inline]
 __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2516

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_vti.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index 207bf342e995..72f51504cfc8 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -196,7 +196,6 @@ static int vti6_tnl_create2(struct net_device *dev)
 
 	strcpy(t->parms.name, dev->name);
 
-	dev_hold(dev);
 	vti6_tnl_link(ip6n, t);
 
 	return 0;
@@ -903,6 +902,7 @@ static inline int vti6_dev_init_gen(struct net_device *dev)
 	dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
 	if (!dev->tstats)
 		return -ENOMEM;
+	dev_hold(dev);
 	return 0;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 12/25] mac80211: clear the beacon's CRC after channel switch

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit d6843d1ee283137723b4a8c76244607ce6db1951 ]

After channel switch, we should consider any beacon with a
CSA IE as a new switch. If the CSA IE is a leftover from
before the switch that the AP forgot to remove, we'll get
a CSA-to-Self.

This caused issues in iwlwifi where the firmware saw a beacon
with a CSA-to-Self with mode = 1 on the new channel after a
switch. The firmware considered this a new switch and closed
its queues. Since the beacon didn't change between before and
after the switch, we wouldn't handle it (the CRC is the same)
and we wouldn't let the firmware open its queues again or
disconnect if the CSA IE stays for too long.

Clear the CRC valid state after we switch to make sure that
we handle the beacon and handle the CSA IE as required.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20210408143124.b9e68aa98304.I465afb55ca2c7d59f7bf610c6046a1fd732b4c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index ab26b8b95471..a3ec3b1bb324 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1100,6 +1100,11 @@ static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
 
 	sdata->vif.csa_active = false;
 	ifmgd->csa_waiting_bcn = false;
+	/*
+	 * If the CSA IE is still present on the beacon after the switch,
+	 * we need to consider it as a new CSA (possibly to self).
+	 */
+	ifmgd->beacon_crc_valid = false;
 
 	ret = drv_post_channel_switch(sdata);
 	if (ret) {
-- 
2.30.2

[PATCH AUTOSEL 4.14 15/25] selftests: Set CC to clang in lib.mk if LLVM is set

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit 26e6dd1072763cd5696b75994c03982dde952ad9 ]

selftests/bpf/Makefile includes lib.mk. With the following command
  make -j60 LLVM=1 LLVM_IAS=1  <=== compile kernel
  make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed lib.mk issue which sets CC to gcc in all cases.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/lib.mk | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk
index c9be64dc681d..cd3034602ea5 100644
--- a/tools/testing/selftests/lib.mk
+++ b/tools/testing/selftests/lib.mk
@@ -1,6 +1,10 @@
 # This mimics the top-level Makefile. We do it explicitly here so that this
 # Makefile can operate with or without the kbuild infrastructure.
+ifneq ($(LLVM),)
+CC := clang
+else
 CC := $(CROSS_COMPILE)gcc
+endif
 
 ifeq (0,$(MAKELEVEL))
 OUTPUT := $(shell pwd)
-- 
2.30.2

[PATCH AUTOSEL 4.14 17/25] sctp: Fix out-of-bounds warning in sctp_process_asconf_param()

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit e5272ad4aab347dde5610c0aedb786219e3ff793 ]

Fix the following out-of-bounds warning:

net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds]

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/sm_make_chunk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index e698edd56bd5..1cd22a38fe42 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -3128,7 +3128,7 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 		 * primary.
 		 */
 		if (af->is_any(&addr))
-			memcpy(&addr.v4, sctp_source(asconf), sizeof(addr));
+			memcpy(&addr, sctp_source(asconf), sizeof(addr));
 
 		peer = sctp_assoc_lookup_paddr(asoc, &addr);
 		if (!peer)
-- 
2.30.2

[PATCH AUTOSEL 4.14 20/25] samples/bpf: Fix broken tracex1 due to kprobe argument change

[Sasha Levin]

From: Yaqi Chen <chendotjs@gmail.com>

[ Upstream commit 137733d08f4ab14a354dacaa9a8fc35217747605 ]

>From commit c0bbbdc32feb ("__netif_receive_skb_core: pass skb by
reference"), the first argument passed into __netif_receive_skb_core
has changed to reference of a skb pointer.

This commit fixes by using bpf_probe_read_kernel.

Signed-off-by: Yaqi Chen <chendotjs@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210416154803.37157-1-chendotjs@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/tracex1_kern.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/samples/bpf/tracex1_kern.c b/samples/bpf/tracex1_kern.c
index 107da148820f..9c74b45c5720 100644
--- a/samples/bpf/tracex1_kern.c
+++ b/samples/bpf/tracex1_kern.c
@@ -20,7 +20,7 @@
 SEC("kprobe/__netif_receive_skb_core")
 int bpf_prog1(struct pt_regs *ctx)
 {
-	/* attaches to kprobe netif_receive_skb,
+	/* attaches to kprobe __netif_receive_skb_core,
 	 * looks for packets on loobpack device and prints them
 	 */
 	char devname[IFNAMSIZ];
@@ -29,7 +29,7 @@ int bpf_prog1(struct pt_regs *ctx)
 	int len;
 
 	/* non-portable! works for the given kernel only */
-	skb = (struct sk_buff *) PT_REGS_PARM1(ctx);
+	bpf_probe_read_kernel(&skb, sizeof(skb), (void *)PT_REGS_PARM1(ctx));
 	dev = _(skb->dev);
 	len = _(skb->len);
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 22/25] wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit 820aa37638a252b57967bdf4038a514b1ab85d45 ]

Fix the following out-of-bounds warnings by enclosing structure members
daddr and saddr into new struct addr, in structures wl3501_md_req and
wl3501_md_ind:

arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]

Refactor the code, accordingly:

$ pahole -C wl3501_md_req drivers/net/wireless/wl3501_cs.o
struct wl3501_md_req {
	u16                        next_blk;             /*     0     2 */
	u8                         sig_id;               /*     2     1 */
	u8                         routing;              /*     3     1 */
	u16                        data;                 /*     4     2 */
	u16                        size;                 /*     6     2 */
	u8                         pri;                  /*     8     1 */
	u8                         service_class;        /*     9     1 */
	struct {
		u8                 daddr[6];             /*    10     6 */
		u8                 saddr[6];             /*    16     6 */
	} addr;                                          /*    10    12 */

	/* size: 22, cachelines: 1, members: 8 */
	/* last cacheline: 22 bytes */
};

$ pahole -C wl3501_md_ind drivers/net/wireless/wl3501_cs.o
struct wl3501_md_ind {
	u16                        next_blk;             /*     0     2 */
	u8                         sig_id;               /*     2     1 */
	u8                         routing;              /*     3     1 */
	u16                        data;                 /*     4     2 */
	u16                        size;                 /*     6     2 */
	u8                         reception;            /*     8     1 */
	u8                         pri;                  /*     9     1 */
	u8                         service_class;        /*    10     1 */
	struct {
		u8                 daddr[6];             /*    11     6 */
		u8                 saddr[6];             /*    17     6 */
	} addr;                                          /*    11    12 */

	/* size: 24, cachelines: 1, members: 9 */
	/* padding: 1 */
	/* last cacheline: 24 bytes */
};

The problem is that the original code is trying to copy data into a
couple of arrays adjacent to each other in a single call to memcpy().
Now that a new struct _addr_ enclosing those two adjacent arrays
is introduced, memcpy() doesn't overrun the length of &sig.daddr[0]
and &sig.daddr, because the address of the new struct object _addr_
is used, instead.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/d260fe56aed7112bff2be5b4d152d03ad7b78e78.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/wl3501.h    | 12 ++++++++----
 drivers/net/wireless/wl3501_cs.c | 10 ++++++----
 2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index efdce9ae36ea..077a934ae3b5 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -471,8 +471,10 @@ struct wl3501_md_req {
 	u16	size;
 	u8	pri;
 	u8	service_class;
-	u8	daddr[ETH_ALEN];
-	u8	saddr[ETH_ALEN];
+	struct {
+		u8	daddr[ETH_ALEN];
+		u8	saddr[ETH_ALEN];
+	} addr;
 };
 
 struct wl3501_md_ind {
@@ -484,8 +486,10 @@ struct wl3501_md_ind {
 	u8	reception;
 	u8	pri;
 	u8	service_class;
-	u8	daddr[ETH_ALEN];
-	u8	saddr[ETH_ALEN];
+	struct {
+		u8	daddr[ETH_ALEN];
+		u8	saddr[ETH_ALEN];
+	} addr;
 };
 
 struct wl3501_md_confirm {
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index da62220b9c01..0019b01145ba 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -468,6 +468,7 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
 	struct wl3501_md_req sig = {
 		.sig_id = WL3501_SIG_MD_REQ,
 	};
+	size_t sig_addr_len = sizeof(sig.addr);
 	u8 *pdata = (char *)data;
 	int rc = -EIO;
 
@@ -483,9 +484,9 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
 			goto out;
 		}
 		rc = 0;
-		memcpy(&sig.daddr[0], pdata, 12);
-		pktlen = len - 12;
-		pdata += 12;
+		memcpy(&sig.addr, pdata, sig_addr_len);
+		pktlen = len - sig_addr_len;
+		pdata += sig_addr_len;
 		sig.data = bf;
 		if (((*pdata) * 256 + (*(pdata + 1))) > 1500) {
 			u8 addr4[ETH_ALEN] = {
@@ -979,7 +980,8 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
 	} else {
 		skb->dev = dev;
 		skb_reserve(skb, 2); /* IP headers on 16 bytes boundaries */
-		skb_copy_to_linear_data(skb, (unsigned char *)&sig.daddr, 12);
+		skb_copy_to_linear_data(skb, (unsigned char *)&sig.addr,
+					sizeof(sig.addr));
 		wl3501_receive(this, skb->data, pkt_len);
 		skb_put(skb, pkt_len);
 		skb->protocol	= eth_type_trans(skb, dev);
-- 
2.30.2

[PATCH AUTOSEL 4.14 23/25] wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit bb43e5718d8f1b46e7a77e7b39be3c691f293050 ]

Fix the following out-of-bounds warnings by adding a new structure
wl3501_req instead of duplicating the same members in structure
wl3501_join_req and wl3501_scan_confirm:

arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [39, 108] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 36 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [25, 95] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 22 [-Warray-bounds]

Refactor the code, accordingly:

$ pahole -C wl3501_req drivers/net/wireless/wl3501_cs.o
struct wl3501_req {
        u16                        beacon_period;        /*     0     2 */
        u16                        dtim_period;          /*     2     2 */
        u16                        cap_info;             /*     4     2 */
        u8                         bss_type;             /*     6     1 */
        u8                         bssid[6];             /*     7     6 */
        struct iw_mgmt_essid_pset  ssid;                 /*    13    34 */
        struct iw_mgmt_ds_pset     ds_pset;              /*    47     3 */
        struct iw_mgmt_cf_pset     cf_pset;              /*    50     8 */
        struct iw_mgmt_ibss_pset   ibss_pset;            /*    58     4 */
        struct iw_mgmt_data_rset   bss_basic_rset;       /*    62    10 */

        /* size: 72, cachelines: 2, members: 10 */
        /* last cacheline: 8 bytes */
};

$ pahole -C wl3501_join_req drivers/net/wireless/wl3501_cs.o
struct wl3501_join_req {
        u16                        next_blk;             /*     0     2 */
        u8                         sig_id;               /*     2     1 */
        u8                         reserved;             /*     3     1 */
        struct iw_mgmt_data_rset   operational_rset;     /*     4    10 */
        u16                        reserved2;            /*    14     2 */
        u16                        timeout;              /*    16     2 */
        u16                        probe_delay;          /*    18     2 */
        u8                         timestamp[8];         /*    20     8 */
        u8                         local_time[8];        /*    28     8 */
        struct wl3501_req          req;                  /*    36    72 */

        /* size: 108, cachelines: 2, members: 10 */
        /* last cacheline: 44 bytes */
};

$ pahole -C wl3501_scan_confirm drivers/net/wireless/wl3501_cs.o
struct wl3501_scan_confirm {
        u16                        next_blk;             /*     0     2 */
        u8                         sig_id;               /*     2     1 */
        u8                         reserved;             /*     3     1 */
        u16                        status;               /*     4     2 */
        char                       timestamp[8];         /*     6     8 */
        char                       localtime[8];         /*    14     8 */
        struct wl3501_req          req;                  /*    22    72 */
        /* --- cacheline 1 boundary (64 bytes) was 30 bytes ago --- */
        u8                         rssi;                 /*    94     1 */

        /* size: 96, cachelines: 2, members: 8 */
        /* padding: 1 */
        /* last cacheline: 32 bytes */
};

The problem is that the original code is trying to copy data into a
bunch of struct members adjacent to each other in a single call to
memcpy(). Now that a new struct wl3501_req enclosing all those adjacent
members is introduced, memcpy() doesn't overrun the length of
&sig.beacon_period and &this->bss_set[i].beacon_period, because the
address of the new struct object _req_ is used as the destination,
instead.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1fbaf516da763b50edac47d792a9145aa4482e29.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/wl3501.h    | 35 +++++++++++--------------
 drivers/net/wireless/wl3501_cs.c | 44 +++++++++++++++++---------------
 2 files changed, 38 insertions(+), 41 deletions(-)

diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index 077a934ae3b5..a10ee5a68012 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -379,16 +379,7 @@ struct wl3501_get_confirm {
 	u8	mib_value[100];
 };
 
-struct wl3501_join_req {
-	u16			    next_blk;
-	u8			    sig_id;
-	u8			    reserved;
-	struct iw_mgmt_data_rset    operational_rset;
-	u16			    reserved2;
-	u16			    timeout;
-	u16			    probe_delay;
-	u8			    timestamp[8];
-	u8			    local_time[8];
+struct wl3501_req {
 	u16			    beacon_period;
 	u16			    dtim_period;
 	u16			    cap_info;
@@ -401,6 +392,19 @@ struct wl3501_join_req {
 	struct iw_mgmt_data_rset    bss_basic_rset;
 };
 
+struct wl3501_join_req {
+	u16			    next_blk;
+	u8			    sig_id;
+	u8			    reserved;
+	struct iw_mgmt_data_rset    operational_rset;
+	u16			    reserved2;
+	u16			    timeout;
+	u16			    probe_delay;
+	u8			    timestamp[8];
+	u8			    local_time[8];
+	struct wl3501_req	    req;
+};
+
 struct wl3501_join_confirm {
 	u16	next_blk;
 	u8	sig_id;
@@ -443,16 +447,7 @@ struct wl3501_scan_confirm {
 	u16			    status;
 	char			    timestamp[8];
 	char			    localtime[8];
-	u16			    beacon_period;
-	u16			    dtim_period;
-	u16			    cap_info;
-	u8			    bss_type;
-	u8			    bssid[ETH_ALEN];
-	struct iw_mgmt_essid_pset   ssid;
-	struct iw_mgmt_ds_pset	    ds_pset;
-	struct iw_mgmt_cf_pset	    cf_pset;
-	struct iw_mgmt_ibss_pset    ibss_pset;
-	struct iw_mgmt_data_rset    bss_basic_rset;
+	struct wl3501_req	    req;
 	u8			    rssi;
 };
 
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 0019b01145ba..f33ece937047 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -589,7 +589,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas)
 	struct wl3501_join_req sig = {
 		.sig_id		  = WL3501_SIG_JOIN_REQ,
 		.timeout	  = 10,
-		.ds_pset = {
+		.req.ds_pset = {
 			.el = {
 				.id  = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET,
 				.len = 1,
@@ -598,7 +598,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas)
 		},
 	};
 
-	memcpy(&sig.beacon_period, &this->bss_set[stas].beacon_period, 72);
+	memcpy(&sig.req, &this->bss_set[stas].req, sizeof(sig.req));
 	return wl3501_esbq_exec(this, &sig, sizeof(sig));
 }
 
@@ -666,35 +666,37 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
 	if (sig.status == WL3501_STATUS_SUCCESS) {
 		pr_debug("success");
 		if ((this->net_type == IW_MODE_INFRA &&
-		     (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
+		     (sig.req.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
 		    (this->net_type == IW_MODE_ADHOC &&
-		     (sig.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) ||
+		     (sig.req.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) ||
 		    this->net_type == IW_MODE_AUTO) {
 			if (!this->essid.el.len)
 				matchflag = 1;
 			else if (this->essid.el.len == 3 &&
 				 !memcmp(this->essid.essid, "ANY", 3))
 				matchflag = 1;
-			else if (this->essid.el.len != sig.ssid.el.len)
+			else if (this->essid.el.len != sig.req.ssid.el.len)
 				matchflag = 0;
-			else if (memcmp(this->essid.essid, sig.ssid.essid,
+			else if (memcmp(this->essid.essid, sig.req.ssid.essid,
 					this->essid.el.len))
 				matchflag = 0;
 			else
 				matchflag = 1;
 			if (matchflag) {
 				for (i = 0; i < this->bss_cnt; i++) {
-					if (ether_addr_equal_unaligned(this->bss_set[i].bssid, sig.bssid)) {
+					if (ether_addr_equal_unaligned(this->bss_set[i].req.bssid,
+								       sig.req.bssid)) {
 						matchflag = 0;
 						break;
 					}
 				}
 			}
 			if (matchflag && (i < 20)) {
-				memcpy(&this->bss_set[i].beacon_period,
-				       &sig.beacon_period, 73);
+				memcpy(&this->bss_set[i].req,
+				       &sig.req, sizeof(sig.req));
 				this->bss_cnt++;
 				this->rssi = sig.rssi;
+				this->bss_set[i].rssi = sig.rssi;
 			}
 		}
 	} else if (sig.status == WL3501_STATUS_TIMEOUT) {
@@ -886,19 +888,19 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
 			if (this->join_sta_bss < this->bss_cnt) {
 				const int i = this->join_sta_bss;
 				memcpy(this->bssid,
-				       this->bss_set[i].bssid, ETH_ALEN);
-				this->chan = this->bss_set[i].ds_pset.chan;
+				       this->bss_set[i].req.bssid, ETH_ALEN);
+				this->chan = this->bss_set[i].req.ds_pset.chan;
 				iw_copy_mgmt_info_element(&this->keep_essid.el,
-						     &this->bss_set[i].ssid.el);
+						     &this->bss_set[i].req.ssid.el);
 				wl3501_mgmt_auth(this);
 			}
 		} else {
 			const int i = this->join_sta_bss;
 
-			memcpy(&this->bssid, &this->bss_set[i].bssid, ETH_ALEN);
-			this->chan = this->bss_set[i].ds_pset.chan;
+			memcpy(&this->bssid, &this->bss_set[i].req.bssid, ETH_ALEN);
+			this->chan = this->bss_set[i].req.ds_pset.chan;
 			iw_copy_mgmt_info_element(&this->keep_essid.el,
-						  &this->bss_set[i].ssid.el);
+						  &this->bss_set[i].req.ssid.el);
 			wl3501_online(dev);
 		}
 	} else {
@@ -1576,30 +1578,30 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info,
 	for (i = 0; i < this->bss_cnt; ++i) {
 		iwe.cmd			= SIOCGIWAP;
 		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-		memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN);
+		memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].req.bssid, ETH_ALEN);
 		current_ev = iwe_stream_add_event(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe, IW_EV_ADDR_LEN);
 		iwe.cmd		  = SIOCGIWESSID;
 		iwe.u.data.flags  = 1;
-		iwe.u.data.length = this->bss_set[i].ssid.el.len;
+		iwe.u.data.length = this->bss_set[i].req.ssid.el.len;
 		current_ev = iwe_stream_add_point(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe,
-						  this->bss_set[i].ssid.essid);
+						  this->bss_set[i].req.ssid.essid);
 		iwe.cmd	   = SIOCGIWMODE;
-		iwe.u.mode = this->bss_set[i].bss_type;
+		iwe.u.mode = this->bss_set[i].req.bss_type;
 		current_ev = iwe_stream_add_event(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe, IW_EV_UINT_LEN);
 		iwe.cmd = SIOCGIWFREQ;
-		iwe.u.freq.m = this->bss_set[i].ds_pset.chan;
+		iwe.u.freq.m = this->bss_set[i].req.ds_pset.chan;
 		iwe.u.freq.e = 0;
 		current_ev = iwe_stream_add_event(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe, IW_EV_FREQ_LEN);
 		iwe.cmd = SIOCGIWENCODE;
-		if (this->bss_set[i].cap_info & WL3501_MGMT_CAPABILITY_PRIVACY)
+		if (this->bss_set[i].req.cap_info & WL3501_MGMT_CAPABILITY_PRIVACY)
 			iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
 		else
 			iwe.u.data.flags = IW_ENCODE_DISABLED;
-- 
2.30.2

[PATCH AUTOSEL 4.14 25/25] net: ethernet: mtk_eth_soc: fix RX VLAN offload

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 3f57d8c40fea9b20543cab4da12f4680d2ef182c ]

The VLAN ID in the rx descriptor is only valid if the RX_DMA_VTAG bit is
set. Fixes frames wrongly marked with VLAN tags.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
[Ilya: fix commit message]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
 drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index a52909db67f6..dbd16dd5aa04 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -1041,7 +1041,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
 		skb->protocol = eth_type_trans(skb, netdev);
 
 		if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX &&
-		    RX_DMA_VID(trxd.rxd3))
+		    (trxd.rxd2 & RX_DMA_VTAG))
 			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
 					       RX_DMA_VID(trxd.rxd3));
 		skb_record_rx_queue(skb, 0);
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 3d3c24a28112..ef82a30b2a0d 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -283,6 +283,7 @@
 #define RX_DMA_DONE		BIT(31)
 #define RX_DMA_PLEN0(_x)	(((_x) & 0x3fff) << 16)
 #define RX_DMA_GET_PLEN0(_x)	(((_x) >> 16) & 0x3fff)
+#define RX_DMA_VTAG		BIT(15)
 
 /* QDMA descriptor rxd3 */
 #define RX_DMA_VID(_x)		((_x) & 0xfff)
-- 
2.30.2