netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ido Schimmel <idosch@idosch.org>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, jiri@nvidia.com,
	vadimp@nvidia.com, mlxsw@nvidia.com,
	Ido Schimmel <idosch@nvidia.com>
Subject: [PATCH net-next 3/3] mlxsw: core: Add support for module EEPROM read by page
Date: Mon, 21 Jun 2021 10:50:41 +0300	[thread overview]
Message-ID: <20210621075041.2502416-4-idosch@idosch.org> (raw)
In-Reply-To: <20210621075041.2502416-1-idosch@idosch.org>

From: Ido Schimmel <idosch@nvidia.com>

Add support for ethtool_ops::get_module_eeprom_by_page() which allows
user space to read transceiver module EEPROM based on passed parameters.

The I2C address is not validated in order to avoid module-specific code.
In case of wrong address, error will be returned from device's firmware.

Tested by comparing output with legacy method (ioctl) output.

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
---
 .../net/ethernet/mellanox/mlxsw/core_env.c    | 74 +++++++++++++++++++
 .../net/ethernet/mellanox/mlxsw/core_env.h    |  7 ++
 drivers/net/ethernet/mellanox/mlxsw/minimal.c | 13 ++++
 .../mellanox/mlxsw/spectrum_ethtool.c         | 14 ++++
 4 files changed, 108 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_env.c b/drivers/net/ethernet/mellanox/mlxsw/core_env.c
index b3ca5bd33a7f..4a0dbdb6730b 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_env.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_env.c
@@ -3,6 +3,7 @@
 
 #include <linux/kernel.h>
 #include <linux/err.h>
+#include <linux/ethtool.h>
 #include <linux/sfp.h>
 
 #include "core.h"
@@ -315,6 +316,79 @@ int mlxsw_env_get_module_eeprom(struct net_device *netdev,
 }
 EXPORT_SYMBOL(mlxsw_env_get_module_eeprom);
 
+static int mlxsw_env_mcia_status_process(const char *mcia_pl,
+					 struct netlink_ext_ack *extack)
+{
+	u8 status = mlxsw_reg_mcia_status_get(mcia_pl);
+
+	switch (status) {
+	case MLXSW_REG_MCIA_STATUS_GOOD:
+		return 0;
+	case MLXSW_REG_MCIA_STATUS_NO_EEPROM_MODULE:
+		NL_SET_ERR_MSG_MOD(extack, "No response from module's EEPROM");
+		return -EIO;
+	case MLXSW_REG_MCIA_STATUS_MODULE_NOT_SUPPORTED:
+		NL_SET_ERR_MSG_MOD(extack, "Module type not supported by the device");
+		return -EOPNOTSUPP;
+	case MLXSW_REG_MCIA_STATUS_MODULE_NOT_CONNECTED:
+		NL_SET_ERR_MSG_MOD(extack, "No module present indication");
+		return -EIO;
+	case MLXSW_REG_MCIA_STATUS_I2C_ERROR:
+		NL_SET_ERR_MSG_MOD(extack, "Error occurred while trying to access module's EEPROM using I2C");
+		return -EIO;
+	case MLXSW_REG_MCIA_STATUS_MODULE_DISABLED:
+		NL_SET_ERR_MSG_MOD(extack, "Module is disabled");
+		return -EIO;
+	default:
+		NL_SET_ERR_MSG_MOD(extack, "Unknown error");
+		return -EIO;
+	}
+}
+
+int
+mlxsw_env_get_module_eeprom_by_page(struct mlxsw_core *mlxsw_core, u8 module,
+				    const struct ethtool_module_eeprom *page,
+				    struct netlink_ext_ack *extack)
+{
+	u32 bytes_read = 0;
+	u16 device_addr;
+
+	/* Offset cannot be larger than 2 * ETH_MODULE_EEPROM_PAGE_LEN */
+	device_addr = page->offset;
+
+	while (bytes_read < page->length) {
+		char eeprom_tmp[MLXSW_REG_MCIA_EEPROM_SIZE];
+		char mcia_pl[MLXSW_REG_MCIA_LEN];
+		u8 size;
+		int err;
+
+		size = min_t(u8, page->length - bytes_read,
+			     MLXSW_REG_MCIA_EEPROM_SIZE);
+
+		mlxsw_reg_mcia_pack(mcia_pl, module, 0, page->page,
+				    device_addr + bytes_read, size,
+				    page->i2c_address);
+		mlxsw_reg_mcia_bank_number_set(mcia_pl, page->bank);
+
+		err = mlxsw_reg_query(mlxsw_core, MLXSW_REG(mcia), mcia_pl);
+		if (err) {
+			NL_SET_ERR_MSG_MOD(extack, "Failed to access module's EEPROM");
+			return err;
+		}
+
+		err = mlxsw_env_mcia_status_process(mcia_pl, extack);
+		if (err)
+			return err;
+
+		mlxsw_reg_mcia_eeprom_memcpy_from(mcia_pl, eeprom_tmp);
+		memcpy(page->data + bytes_read, eeprom_tmp, size);
+		bytes_read += size;
+	}
+
+	return bytes_read;
+}
+EXPORT_SYMBOL(mlxsw_env_get_module_eeprom_by_page);
+
 static int mlxsw_env_module_has_temp_sensor(struct mlxsw_core *mlxsw_core,
 					    u8 module,
 					    bool *p_has_temp_sensor)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_env.h b/drivers/net/ethernet/mellanox/mlxsw/core_env.h
index 2b23f8a87862..0bf5bd0f8a7e 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_env.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_env.h
@@ -4,6 +4,8 @@
 #ifndef _MLXSW_CORE_ENV_H
 #define _MLXSW_CORE_ENV_H
 
+#include <linux/ethtool.h>
+
 struct ethtool_modinfo;
 struct ethtool_eeprom;
 
@@ -17,6 +19,11 @@ int mlxsw_env_get_module_eeprom(struct net_device *netdev,
 				struct mlxsw_core *mlxsw_core, int module,
 				struct ethtool_eeprom *ee, u8 *data);
 
+int
+mlxsw_env_get_module_eeprom_by_page(struct mlxsw_core *mlxsw_core, u8 module,
+				    const struct ethtool_module_eeprom *page,
+				    struct netlink_ext_ack *extack);
+
 int
 mlxsw_env_module_overheat_counter_get(struct mlxsw_core *mlxsw_core, u8 module,
 				      u64 *p_counter);
diff --git a/drivers/net/ethernet/mellanox/mlxsw/minimal.c b/drivers/net/ethernet/mellanox/mlxsw/minimal.c
index 68102726c6a7..d9d56c44e994 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/minimal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/minimal.c
@@ -112,10 +112,23 @@ mlxsw_m_get_module_eeprom(struct net_device *netdev, struct ethtool_eeprom *ee,
 					   ee, data);
 }
 
+static int
+mlxsw_m_get_module_eeprom_by_page(struct net_device *netdev,
+				  const struct ethtool_module_eeprom *page,
+				  struct netlink_ext_ack *extack)
+{
+	struct mlxsw_m_port *mlxsw_m_port = netdev_priv(netdev);
+	struct mlxsw_core *core = mlxsw_m_port->mlxsw_m->core;
+
+	return mlxsw_env_get_module_eeprom_by_page(core, mlxsw_m_port->module,
+						   page, extack);
+}
+
 static const struct ethtool_ops mlxsw_m_port_ethtool_ops = {
 	.get_drvinfo		= mlxsw_m_module_get_drvinfo,
 	.get_module_info	= mlxsw_m_get_module_info,
 	.get_module_eeprom	= mlxsw_m_get_module_eeprom,
+	.get_module_eeprom_by_page = mlxsw_m_get_module_eeprom_by_page,
 };
 
 static int
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
index c8061beed6db..267590a0eee7 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
@@ -1050,6 +1050,19 @@ static int mlxsw_sp_get_module_eeprom(struct net_device *netdev,
 	return err;
 }
 
+static int
+mlxsw_sp_get_module_eeprom_by_page(struct net_device *dev,
+				   const struct ethtool_module_eeprom *page,
+				   struct netlink_ext_ack *extack)
+{
+	struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
+	struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+	u8 module = mlxsw_sp_port->mapping.module;
+
+	return mlxsw_env_get_module_eeprom_by_page(mlxsw_sp->core, module, page,
+						   extack);
+}
+
 static int
 mlxsw_sp_get_ts_info(struct net_device *netdev, struct ethtool_ts_info *info)
 {
@@ -1199,6 +1212,7 @@ const struct ethtool_ops mlxsw_sp_port_ethtool_ops = {
 	.set_link_ksettings		= mlxsw_sp_port_set_link_ksettings,
 	.get_module_info		= mlxsw_sp_get_module_info,
 	.get_module_eeprom		= mlxsw_sp_get_module_eeprom,
+	.get_module_eeprom_by_page	= mlxsw_sp_get_module_eeprom_by_page,
 	.get_ts_info			= mlxsw_sp_get_ts_info,
 	.get_eth_phy_stats		= mlxsw_sp_get_eth_phy_stats,
 	.get_eth_mac_stats		= mlxsw_sp_get_eth_mac_stats,
-- 
2.31.1


  parent reply	other threads:[~2021-06-21  7:51 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-21  7:50 [PATCH net-next 0/3] mlxsw: Add support for module EEPROM read by page Ido Schimmel
2021-06-21  7:50 ` [PATCH net-next 1/3] mlxsw: reg: Add bank number to MCIA register Ido Schimmel
2021-06-21  7:50 ` [PATCH net-next 2/3] mlxsw: reg: Document possible MCIA status values Ido Schimmel
2021-06-21  7:50 ` Ido Schimmel [this message]
2021-06-21 19:50 ` [PATCH net-next 0/3] mlxsw: Add support for module EEPROM read by page patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210621075041.2502416-4-idosch@idosch.org \
    --to=idosch@idosch.org \
    --cc=davem@davemloft.net \
    --cc=idosch@nvidia.com \
    --cc=jiri@nvidia.com \
    --cc=kuba@kernel.org \
    --cc=mlxsw@nvidia.com \
    --cc=netdev@vger.kernel.org \
    --cc=vadimp@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).