[PATCH net-next 0/6 v5] RTL8366(RB) cleanups part 1

[PATCH net-next 0/6 v5] RTL8366(RB) cleanups part 1

[Linus Walleij]

This is a first set of patches making the RTL8366RB work out of
the box with a default OpenWrt userspace.

We achieve bridge port isolation with the first patch, and the
next 5 patches removes the very weird VLAN set-up with one
VLAN with PVID per port that has been in this driver in all
vendor trees and in OpenWrt for years.

The switch is now managed the way a modern bridge/DSA switch
shall be managed.

After these patches are merged, I will send the next set which
adds new features, some which have circulated before.

ChangeLog v4->v5:
- Drop the patch disabling 4K VLAN.
- Drop the patch forcing VLAN0 untagged.
- Fix a semantic bug in the filer enablement code.

DENG Qingfang (1):
  net: dsa: rtl8366rb: Support bridge offloading

Linus Walleij (5):
  net: dsa: rtl8366: Drop custom VLAN set-up
  net: dsa: rtl8366rb: Rewrite weird VLAN filering enablement
  net: dsa: rtl8366rb: Fix off-by-one bug
  net: dsa: rtl8366: Fix a bug in deleting VLANs
  net: dsa: rtl8366: Drop and depromote pointless prints

 drivers/net/dsa/realtek-smi-core.h |   3 -
 drivers/net/dsa/rtl8366.c          |  96 ++--------------------
 drivers/net/dsa/rtl8366rb.c        | 123 ++++++++++++++++++++++++++---
 3 files changed, 118 insertions(+), 104 deletions(-)

-- 
2.31.1

[PATCH net-next 1/6 v5] net: dsa: rtl8366rb: Support bridge offloading

[Linus Walleij]

From: DENG Qingfang <dqfext@gmail.com>

Use port isolation registers to configure bridge offloading.

Tested on the D-Link DIR-685, switching between ports and
sniffing ports to make sure no packets leak.

Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- No changes just resending with the rest of the
  patches.
ChangeLog v3->v4:
- Fix a bug where I managed to mask off the CPU port
  from the ports we could access leading to numb
  bridge.
- Reword some comments.
ChangeLog v2->v3:
- Parens around the (pmask) in the port isolation macro.
- Do not exit join/leave functions on regmap failures,
  print an error and continue.
- Clarify comments around the port in join/leave
  functions.
ChangeLog v1->v2:
- introduce RTL8366RB_PORT_ISO_PORTS() to shift the port
  mask into place so we are not confused by the enable
  bit.
- Use this with dsa_user_ports() to isolate the CPU port
  from itself.
---
 drivers/net/dsa/rtl8366rb.c | 86 +++++++++++++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index a89093bc6c6a..b930050cfd1b 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -300,6 +300,13 @@
 #define RTL8366RB_INTERRUPT_STATUS_REG	0x0442
 #define RTL8366RB_NUM_INTERRUPT		14 /* 0..13 */
 
+/* Port isolation registers */
+#define RTL8366RB_PORT_ISO_BASE		0x0F08
+#define RTL8366RB_PORT_ISO(pnum)	(RTL8366RB_PORT_ISO_BASE + (pnum))
+#define RTL8366RB_PORT_ISO_EN		BIT(0)
+#define RTL8366RB_PORT_ISO_PORTS_MASK	GENMASK(7, 1)
+#define RTL8366RB_PORT_ISO_PORTS(pmask)	((pmask) << 1)
+
 /* bits 0..5 enable force when cleared */
 #define RTL8366RB_MAC_FORCE_CTRL_REG	0x0F11
 
@@ -835,6 +842,21 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 	if (ret)
 		return ret;
 
+	/* Isolate all user ports so they can only send packets to itself and the CPU port */
+	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+		ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(i),
+				   RTL8366RB_PORT_ISO_PORTS(BIT(RTL8366RB_PORT_NUM_CPU)) |
+				   RTL8366RB_PORT_ISO_EN);
+		if (ret)
+			return ret;
+	}
+	/* CPU port can send packets to all ports */
+	ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(RTL8366RB_PORT_NUM_CPU),
+			   RTL8366RB_PORT_ISO_PORTS(dsa_user_ports(ds)) |
+			   RTL8366RB_PORT_ISO_EN);
+	if (ret)
+		return ret;
+
 	/* Set up the "green ethernet" feature */
 	ret = rtl8366rb_jam_table(rtl8366rb_green_jam,
 				  ARRAY_SIZE(rtl8366rb_green_jam), smi, false);
@@ -1127,6 +1149,68 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port)
 	rb8366rb_set_port_led(smi, port, false);
 }
 
+static int
+rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port,
+			   struct net_device *bridge)
+{
+	struct realtek_smi *smi = ds->priv;
+	unsigned int port_bitmap = 0;
+	int ret, i;
+
+	/* Loop over all other ports than the current one */
+	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+		/* Current port handled last */
+		if (i == port)
+			continue;
+		/* Not on this bridge */
+		if (dsa_to_port(ds, i)->bridge_dev != bridge)
+			continue;
+		/* Join this port to each other port on the bridge */
+		ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+					 RTL8366RB_PORT_ISO_PORTS(BIT(port)),
+					 RTL8366RB_PORT_ISO_PORTS(BIT(port)));
+		if (ret)
+			dev_err(smi->dev, "failed to join port %d\n", port);
+
+		port_bitmap |= BIT(i);
+	}
+
+	/* Set the bits for the ports we can access */
+	return regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+				  RTL8366RB_PORT_ISO_PORTS(port_bitmap),
+				  RTL8366RB_PORT_ISO_PORTS(port_bitmap));
+}
+
+static void
+rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
+			    struct net_device *bridge)
+{
+	struct realtek_smi *smi = ds->priv;
+	unsigned int port_bitmap = 0;
+	int ret, i;
+
+	/* Loop over all other ports than this one */
+	for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
+		/* Current port handled last */
+		if (i == port)
+			continue;
+		/* Not on this bridge */
+		if (dsa_to_port(ds, i)->bridge_dev != bridge)
+			continue;
+		/* Remove this port from any other port on the bridge */
+		ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
+					 RTL8366RB_PORT_ISO_PORTS(BIT(port)), 0);
+		if (ret)
+			dev_err(smi->dev, "failed to leave port %d\n", port);
+
+		port_bitmap |= BIT(i);
+	}
+
+	/* Clear the bits for the ports we can not access, leave ourselves */
+	regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
+			   RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0);
+}
+
 static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
 {
 	struct realtek_smi *smi = ds->priv;
@@ -1510,6 +1594,8 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops = {
 	.get_strings = rtl8366_get_strings,
 	.get_ethtool_stats = rtl8366_get_ethtool_stats,
 	.get_sset_count = rtl8366_get_sset_count,
+	.port_bridge_join = rtl8366rb_port_bridge_join,
+	.port_bridge_leave = rtl8366rb_port_bridge_leave,
 	.port_vlan_filtering = rtl8366_vlan_filtering,
 	.port_vlan_add = rtl8366_vlan_add,
 	.port_vlan_del = rtl8366_vlan_del,
-- 
2.31.1

[PATCH net-next 2/6 v5] net: dsa: rtl8366: Drop custom VLAN set-up

[Linus Walleij]

This hacky default VLAN setup was done in order to direct
packets to the right ports and provide port isolation, both
which we now support properly using custom tags and proper
bridge port isolation.

We can drop the custom VLAN code and leave all VLAN handling
alone, as users expect things to be. We can also drop
ds->configure_vlan_while_not_filtering = false; and let
the core deal with any VLANs it wants.

Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- No changes just resending with the rest of the
  patches.
ChangeLog v3->v4:
- No changes
ChangeLog v2->v3:
- Collect a bunch of reviewed-by tags
ChangeLog v1->v2:
- No changes.
---
 drivers/net/dsa/realtek-smi-core.h |  1 -
 drivers/net/dsa/rtl8366.c          | 48 ------------------------------
 drivers/net/dsa/rtl8366rb.c        |  4 +--
 3 files changed, 1 insertion(+), 52 deletions(-)

diff --git a/drivers/net/dsa/realtek-smi-core.h b/drivers/net/dsa/realtek-smi-core.h
index fcf465f7f922..c8fbd7b9fd0b 100644
--- a/drivers/net/dsa/realtek-smi-core.h
+++ b/drivers/net/dsa/realtek-smi-core.h
@@ -129,7 +129,6 @@ int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
 int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
 int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable);
 int rtl8366_reset_vlan(struct realtek_smi *smi);
-int rtl8366_init_vlan(struct realtek_smi *smi);
 int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
 			   struct netlink_ext_ack *extack);
 int rtl8366_vlan_add(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 75897a369096..59c5bc4f7b71 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -292,54 +292,6 @@ int rtl8366_reset_vlan(struct realtek_smi *smi)
 }
 EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
 
-int rtl8366_init_vlan(struct realtek_smi *smi)
-{
-	int port;
-	int ret;
-
-	ret = rtl8366_reset_vlan(smi);
-	if (ret)
-		return ret;
-
-	/* Loop over the available ports, for each port, associate
-	 * it with the VLAN (port+1)
-	 */
-	for (port = 0; port < smi->num_ports; port++) {
-		u32 mask;
-
-		if (port == smi->cpu_port)
-			/* For the CPU port, make all ports members of this
-			 * VLAN.
-			 */
-			mask = GENMASK((int)smi->num_ports - 1, 0);
-		else
-			/* For all other ports, enable itself plus the
-			 * CPU port.
-			 */
-			mask = BIT(port) | BIT(smi->cpu_port);
-
-		/* For each port, set the port as member of VLAN (port+1)
-		 * and untagged, except for the CPU port: the CPU port (5) is
-		 * member of VLAN 6 and so are ALL the other ports as well.
-		 * Use filter 0 (no filter).
-		 */
-		dev_info(smi->dev, "VLAN%d port mask for port %d, %08x\n",
-			 (port + 1), port, mask);
-		ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0);
-		if (ret)
-			return ret;
-
-		dev_info(smi->dev, "VLAN%d port %d, PVID set to %d\n",
-			 (port + 1), port, (port + 1));
-		ret = rtl8366_set_pvid(smi, port, (port + 1));
-		if (ret)
-			return ret;
-	}
-
-	return rtl8366_enable_vlan(smi, true);
-}
-EXPORT_SYMBOL_GPL(rtl8366_init_vlan);
-
 int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
 			   struct netlink_ext_ack *extack)
 {
diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index b930050cfd1b..a5b7d7ff8884 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -985,7 +985,7 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 			return ret;
 	}
 
-	ret = rtl8366_init_vlan(smi);
+	ret = rtl8366_reset_vlan(smi);
 	if (ret)
 		return ret;
 
@@ -999,8 +999,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 		return -ENODEV;
 	}
 
-	ds->configure_vlan_while_not_filtering = false;
-
 	return 0;
 }
 
-- 
2.31.1

[PATCH net-next 3/6 v5] net: dsa: rtl8366rb: Rewrite weird VLAN filering enablement

[Linus Walleij]

While we were defining one VLAN per port for isolating the ports
the port_vlan_filtering() callback was implemented to enable a
VLAN on the port + 1. This function makes no sense, not only is
it incomplete as it only enables the VLAN, it doesn't do what
the callback is supposed to do, which is to selectively enable
and disable filtering on a certain port.

Implement the correct callback: we have two registers dealing
with filtering on the RTL9366RB, so we implement an ASIC-specific
callback and implement filering using the register bit that makes
the switch drop frames if the port is not in the VLAN member set.

Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Drop the code dropping frames without VID, after Florian
  described that this is not expected semantics for this
  callback.
ChangeLog v1->v4:
- New patch after discovering that this weirdness of mine is
  causing problems.
---
 drivers/net/dsa/realtek-smi-core.h |  2 --
 drivers/net/dsa/rtl8366.c          | 35 ------------------------------
 drivers/net/dsa/rtl8366rb.c        | 31 +++++++++++++++++++++-----
 3 files changed, 25 insertions(+), 43 deletions(-)

diff --git a/drivers/net/dsa/realtek-smi-core.h b/drivers/net/dsa/realtek-smi-core.h
index c8fbd7b9fd0b..214f710d7dd5 100644
--- a/drivers/net/dsa/realtek-smi-core.h
+++ b/drivers/net/dsa/realtek-smi-core.h
@@ -129,8 +129,6 @@ int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
 int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
 int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable);
 int rtl8366_reset_vlan(struct realtek_smi *smi);
-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
-			   struct netlink_ext_ack *extack);
 int rtl8366_vlan_add(struct dsa_switch *ds, int port,
 		     const struct switchdev_obj_port_vlan *vlan,
 		     struct netlink_ext_ack *extack);
diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 59c5bc4f7b71..0672dd56c698 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -292,41 +292,6 @@ int rtl8366_reset_vlan(struct realtek_smi *smi)
 }
 EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
 
-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
-			   struct netlink_ext_ack *extack)
-{
-	struct realtek_smi *smi = ds->priv;
-	struct rtl8366_vlan_4k vlan4k;
-	int ret;
-
-	/* Use VLAN nr port + 1 since VLAN0 is not valid */
-	if (!smi->ops->is_vlan_valid(smi, port + 1))
-		return -EINVAL;
-
-	dev_info(smi->dev, "%s filtering on port %d\n",
-		 vlan_filtering ? "enable" : "disable",
-		 port);
-
-	/* TODO:
-	 * The hardware support filter ID (FID) 0..7, I have no clue how to
-	 * support this in the driver when the callback only says on/off.
-	 */
-	ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k);
-	if (ret)
-		return ret;
-
-	/* Just set the filter to FID 1 for now then */
-	ret = rtl8366_set_vlan(smi, port + 1,
-			       vlan4k.member,
-			       vlan4k.untag,
-			       1);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering);
-
 int rtl8366_vlan_add(struct dsa_switch *ds, int port,
 		     const struct switchdev_obj_port_vlan *vlan,
 		     struct netlink_ext_ack *extack)
diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index a5b7d7ff8884..1f228a7a5685 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -143,6 +143,8 @@
 #define RTL8366RB_PHY_NO_OFFSET			9
 #define RTL8366RB_PHY_NO_MASK			(0x1f << 9)
 
+/* VLAN Ingress Control Register */
+#define RTL8366RB_VLAN_INGRESS_CTRL1_REG	0x037E
 #define RTL8366RB_VLAN_INGRESS_CTRL2_REG	0x037f
 
 /* LED control registers */
@@ -933,11 +935,13 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 	if (ret)
 		return ret;
 
-	/* Discard VLAN tagged packets if the port is not a member of
-	 * the VLAN with which the packets is associated.
-	 */
+	/* Accept all packets by default, we enable filtering on-demand */
+	ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
+			   0);
+	if (ret)
+		return ret;
 	ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
-			   RTL8366RB_PORT_ALL);
+			   0);
 	if (ret)
 		return ret;
 
@@ -1209,6 +1213,21 @@ rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
 			   RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0);
 }
 
+static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
+				    bool vlan_filtering,
+				    struct netlink_ext_ack *extack)
+{
+	struct realtek_smi *smi = ds->priv;
+	int ret;
+
+	dev_dbg(smi->dev, "port %d: %s VLAN filtering\n", port,
+		vlan_filtering ? "enable" : "disable");
+
+	/* If the port is not in the member set, the frame will be dropped */
+	return regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
+				  BIT(port), vlan_filtering ? BIT(port) : 0);
+}
+
 static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
 {
 	struct realtek_smi *smi = ds->priv;
@@ -1437,7 +1456,7 @@ static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan)
 	if (smi->vlan4k_enabled)
 		max = RTL8366RB_NUM_VIDS - 1;
 
-	if (vlan == 0 || vlan > max)
+	if (vlan > max)
 		return false;
 
 	return true;
@@ -1594,7 +1613,7 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops = {
 	.get_sset_count = rtl8366_get_sset_count,
 	.port_bridge_join = rtl8366rb_port_bridge_join,
 	.port_bridge_leave = rtl8366rb_port_bridge_leave,
-	.port_vlan_filtering = rtl8366_vlan_filtering,
+	.port_vlan_filtering = rtl8366rb_vlan_filtering,
 	.port_vlan_add = rtl8366_vlan_add,
 	.port_vlan_del = rtl8366_vlan_del,
 	.port_enable = rtl8366rb_port_enable,
-- 
2.31.1

[PATCH net-next 4/6 v5] net: dsa: rtl8366rb: Fix off-by-one bug

[Linus Walleij]

The max VLAN number with non-4K VLAN activated is 15, and the
range is 0..15. Not 16.

The impact should be low since we by default have 4K VLAN and
thus have 4095 VLANs to play with in this switch. There will
not be a problem unless the code is rewritten to only use
16 VLANs.

Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Add some more text describing that this is not a critical bug.
- Add Fixes tag
ChangeLog v1->v4:
- New patch for a bug discovered when fixing the other issues.
---
 drivers/net/dsa/rtl8366rb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index 1f228a7a5685..7e57442ab0ca 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -1451,7 +1451,7 @@ static int rtl8366rb_set_mc_index(struct realtek_smi *smi, int port, int index)
 
 static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan)
 {
-	unsigned int max = RTL8366RB_NUM_VLANS;
+	unsigned int max = RTL8366RB_NUM_VLANS - 1;
 
 	if (smi->vlan4k_enabled)
 		max = RTL8366RB_NUM_VIDS - 1;
-- 
2.31.1

[PATCH net-next 5/6 v5] net: dsa: rtl8366: Fix a bug in deleting VLANs

[Linus Walleij]

We were checking that the MC (member config) was != 0
for some reason, all we need to check is that the config
has no ports, i.e. no members. Then it can be recycled.
This must be some misunderstanding.

Fixes: 4ddcaf1ebb5e ("net: dsa: rtl8366: Properly clear member config")
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Collect Florians review tag
- Add Fixes tag
ChangeLog v1->v4:
- New patch for a bug found while fixing the other issues.
---
 drivers/net/dsa/rtl8366.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 0672dd56c698..f815cd16ad48 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -374,7 +374,7 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port,
 			 * anymore then clear the whole member
 			 * config so it can be reused.
 			 */
-			if (!vlanmc.member && vlanmc.untag) {
+			if (!vlanmc.member) {
 				vlanmc.vid = 0;
 				vlanmc.priority = 0;
 				vlanmc.fid = 0;
-- 
2.31.1

[PATCH net-next 6/6 v5] net: dsa: rtl8366: Drop and depromote pointless prints

[Linus Walleij]

We don't need a message for every VLAN association, dbg
is fine. The message about adding the DSA or CPU
port to a VLAN is directly misleading, this is perfectly
fine.

Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
Cc: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Collect Florians review tag.
ChangeLog v1->v4:
- New patch to deal with confusing messages and too talkative
  DSA bridge.
---
 drivers/net/dsa/rtl8366.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index f815cd16ad48..bb6189aedcd4 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -318,12 +318,9 @@ int rtl8366_vlan_add(struct dsa_switch *ds, int port,
 		return ret;
 	}
 
-	dev_info(smi->dev, "add VLAN %d on port %d, %s, %s\n",
-		 vlan->vid, port, untagged ? "untagged" : "tagged",
-		 pvid ? " PVID" : "no PVID");
-
-	if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
-		dev_err(smi->dev, "port is DSA or CPU port\n");
+	dev_dbg(smi->dev, "add VLAN %d on port %d, %s, %s\n",
+		vlan->vid, port, untagged ? "untagged" : "tagged",
+		pvid ? " PVID" : "no PVID");
 
 	member |= BIT(port);
 
@@ -356,7 +353,7 @@ int rtl8366_vlan_del(struct dsa_switch *ds, int port,
 	struct realtek_smi *smi = ds->priv;
 	int ret, i;
 
-	dev_info(smi->dev, "del VLAN %04x on port %d\n", vlan->vid, port);
+	dev_dbg(smi->dev, "del VLAN %d on port %d\n", vlan->vid, port);
 
 	for (i = 0; i < smi->num_vlan_mc; i++) {
 		struct rtl8366_vlan_mc vlanmc;
-- 
2.31.1

Re: [PATCH net-next 3/6 v5] net: dsa: rtl8366rb: Rewrite weird VLAN filering enablement

[Jakub Kicinski]

On Sat, 25 Sep 2021 01:36:25 +0200 Linus Walleij wrote:
> +static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
> +				    bool vlan_filtering,
> +				    struct netlink_ext_ack *extack)
> +{
> +	struct realtek_smi *smi = ds->priv;
> +	int ret;

drivers/net/dsa/rtl8366rb.c: In function ‘rtl8366rb_vlan_filtering’:
drivers/net/dsa/rtl8366rb.c:1221:6: warning: unused variable ‘ret’ [-Wunused-variable]
 1221 |  int ret;
      |      ^~~

> +	dev_dbg(smi->dev, "port %d: %s VLAN filtering\n", port,
> +		vlan_filtering ? "enable" : "disable");
> +
> +	/* If the port is not in the member set, the frame will be dropped */
> +	return regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
> +				  BIT(port), vlan_filtering ? BIT(port) : 0);
> +}