[PATCH v1 net-next 0/5] lynx pcs interface cleanup

[PATCH v1 net-next 0/5] lynx pcs interface cleanup

[Colin Foster]

The current Felix driver (and Seville) rely directly on the lynx_pcs
device. There are other possible PCS interfaces that can be used with
this hardware, so this should be abstracted from felix. The generic
phylink_pcs is used instead.

While going through the code, there were some opportunities to change
some misleading variable names. Those are included in this patch set.


Colin Foster (5):
  net: phy: lynx: refactor Lynx PCS module to use generic phylink_pcs
  net: dsa: felix: name change for clarity from pcs to mdio_device
  net: dsa: seville: name change for clarity from pcs to mdio_device
  net: ethernet: enetc: name change for clarity from pcs to mdio_device
  net: pcs: lynx: use a common naming scheme for all lynx_pcs variables

 drivers/net/dsa/ocelot/felix.c                |  3 +-
 drivers/net/dsa/ocelot/felix.h                |  2 +-
 drivers/net/dsa/ocelot/felix_vsc9959.c        | 28 ++++++++-------
 drivers/net/dsa/ocelot/seville_vsc9953.c      | 28 ++++++++-------
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 12 ++++---
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.h  |  3 +-
 .../net/ethernet/freescale/enetc/enetc_pf.c   | 27 +++++++-------
 .../net/ethernet/freescale/enetc/enetc_pf.h   |  4 +--
 drivers/net/pcs/pcs-lynx.c                    | 36 +++++++++++++------
 include/linux/pcs-lynx.h                      |  9 ++---
 10 files changed, 86 insertions(+), 66 deletions(-)

-- 
2.25.1

[PATCH v1 net-next 1/5] net: phy: lynx: refactor Lynx PCS module to use generic phylink_pcs

[Colin Foster]

Remove references to lynx_pcs structures so drivers like the Felix DSA
can reference alternate PCS drivers.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
 drivers/net/dsa/ocelot/felix.c                |  3 +--
 drivers/net/dsa/ocelot/felix.h                |  2 +-
 drivers/net/dsa/ocelot/felix_vsc9959.c        | 20 +++++++++-------
 drivers/net/dsa/ocelot/seville_vsc9953.c      | 22 +++++++++--------
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 12 ++++++----
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.h  |  3 +--
 .../net/ethernet/freescale/enetc/enetc_pf.c   | 15 +++++++-----
 .../net/ethernet/freescale/enetc/enetc_pf.h   |  4 ++--
 drivers/net/pcs/pcs-lynx.c                    | 24 +++++++++++++++----
 include/linux/pcs-lynx.h                      |  9 +++----
 10 files changed, 67 insertions(+), 47 deletions(-)

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index f4fc403fbc1e..bb2a43070ea8 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -21,7 +21,6 @@
 #include <linux/of_net.h>
 #include <linux/pci.h>
 #include <linux/of.h>
-#include <linux/pcs-lynx.h>
 #include <net/pkt_sched.h>
 #include <net/dsa.h>
 #include "felix.h"
@@ -832,7 +831,7 @@ static void felix_phylink_mac_config(struct dsa_switch *ds, int port,
 	struct dsa_port *dp = dsa_to_port(ds, port);
 
 	if (felix->pcs && felix->pcs[port])
-		phylink_set_pcs(dp->pl, &felix->pcs[port]->pcs);
+		phylink_set_pcs(dp->pl, felix->pcs[port]);
 }
 
 static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h
index 515bddc012c0..9395ac119d33 100644
--- a/drivers/net/dsa/ocelot/felix.h
+++ b/drivers/net/dsa/ocelot/felix.h
@@ -62,7 +62,7 @@ struct felix {
 	const struct felix_info		*info;
 	struct ocelot			ocelot;
 	struct mii_bus			*imdio;
-	struct lynx_pcs			**pcs;
+	struct phylink_pcs		**pcs;
 	resource_size_t			switch_base;
 	resource_size_t			imdio_base;
 	enum dsa_tag_protocol		tag_proto;
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 4ffd303c64ea..93ad1d65e212 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1039,7 +1039,7 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
 	int rc;
 
 	felix->pcs = devm_kcalloc(dev, felix->info->num_ports,
-				  sizeof(struct lynx_pcs *),
+				  sizeof(struct phylink_pcs *),
 				  GFP_KERNEL);
 	if (!felix->pcs) {
 		dev_err(dev, "failed to allocate array for PCS PHYs\n");
@@ -1088,8 +1088,8 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
 
 	for (port = 0; port < felix->info->num_ports; port++) {
 		struct ocelot_port *ocelot_port = ocelot->ports[port];
+		struct phylink_pcs *phylink_pcs;
 		struct mdio_device *pcs;
-		struct lynx_pcs *lynx;
 
 		if (dsa_is_unused_port(felix->ds, port))
 			continue;
@@ -1101,13 +1101,13 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
 		if (IS_ERR(pcs))
 			continue;
 
-		lynx = lynx_pcs_create(pcs);
-		if (!lynx) {
+		phylink_pcs = lynx_pcs_create(pcs);
+		if (!phylink_pcs) {
 			mdio_device_free(pcs);
 			continue;
 		}
 
-		felix->pcs[port] = lynx;
+		felix->pcs[port] = phylink_pcs;
 
 		dev_info(dev, "Found PCS at internal MDIO address %d\n", port);
 	}
@@ -1121,13 +1121,15 @@ static void vsc9959_mdio_bus_free(struct ocelot *ocelot)
 	int port;
 
 	for (port = 0; port < ocelot->num_phys_ports; port++) {
-		struct lynx_pcs *pcs = felix->pcs[port];
+		struct phylink_pcs *phylink_pcs = felix->pcs[port];
+		struct mdio_device *mdio_device;
 
-		if (!pcs)
+		if (!phylink_pcs)
 			continue;
 
-		mdio_device_free(pcs->mdio);
-		lynx_pcs_destroy(pcs);
+		mdio_device = lynx_get_mdio_device(phylink_pcs);
+		mdio_device_free(mdio_device);
+		lynx_pcs_destroy(phylink_pcs);
 	}
 	mdiobus_unregister(felix->imdio);
 }
diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index e110550e3507..d34d0f737c16 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -1012,7 +1012,7 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
 	int rc;
 
 	felix->pcs = devm_kcalloc(dev, felix->info->num_ports,
-				  sizeof(struct phy_device *),
+				  sizeof(struct phylink_pcs *),
 				  GFP_KERNEL);
 	if (!felix->pcs) {
 		dev_err(dev, "failed to allocate array for PCS PHYs\n");
@@ -1039,9 +1039,9 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
 
 	for (port = 0; port < felix->info->num_ports; port++) {
 		struct ocelot_port *ocelot_port = ocelot->ports[port];
-		int addr = port + 4;
+		struct phylink_pcs *phylink_pcs;
 		struct mdio_device *pcs;
-		struct lynx_pcs *lynx;
+		int addr = port + 4;
 
 		if (dsa_is_unused_port(felix->ds, port))
 			continue;
@@ -1053,13 +1053,13 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
 		if (IS_ERR(pcs))
 			continue;
 
-		lynx = lynx_pcs_create(pcs);
-		if (!lynx) {
+		phylink_pcs = lynx_pcs_create(pcs);
+		if (!phylink_pcs) {
 			mdio_device_free(pcs);
 			continue;
 		}
 
-		felix->pcs[port] = lynx;
+		felix->pcs[port] = phylink_pcs;
 
 		dev_info(dev, "Found PCS at internal MDIO address %d\n", addr);
 	}
@@ -1073,13 +1073,15 @@ static void vsc9953_mdio_bus_free(struct ocelot *ocelot)
 	int port;
 
 	for (port = 0; port < ocelot->num_phys_ports; port++) {
-		struct lynx_pcs *pcs = felix->pcs[port];
+		struct phylink_pcs *phylink_pcs = felix->pcs[port];
+		struct mdio_device *mdio_device;
 
-		if (!pcs)
+		if (!phylink_pcs)
 			continue;
 
-		mdio_device_free(pcs->mdio);
-		lynx_pcs_destroy(pcs);
+		mdio_device = lynx_get_mdio_device(phylink_pcs);
+		mdio_device_free(mdio_device);
+		lynx_pcs_destroy(phylink_pcs);
 	}
 	mdiobus_unregister(felix->imdio);
 }
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index 34b2a73c347f..fa999996c597 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -204,11 +204,13 @@ static int dpaa2_pcs_create(struct dpaa2_mac *mac,
 
 static void dpaa2_pcs_destroy(struct dpaa2_mac *mac)
 {
-	struct lynx_pcs *pcs = mac->pcs;
+	struct phylink_pcs *phylink_pcs = mac->pcs;
 
-	if (pcs) {
-		struct device *dev = &pcs->mdio->dev;
-		lynx_pcs_destroy(pcs);
+	if (phylink_pcs) {
+		struct mdio_device *mdio = lynx_get_mdio_device(phylink_pcs);
+		struct device *dev = &mdio->dev;
+
+		lynx_pcs_destroy(phylink_pcs);
 		put_device(dev);
 		mac->pcs = NULL;
 	}
@@ -292,7 +294,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	mac->phylink = phylink;
 
 	if (mac->pcs)
-		phylink_set_pcs(mac->phylink, &mac->pcs->pcs);
+		phylink_set_pcs(mac->phylink, mac->pcs);
 
 	err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
 	if (err) {
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
index 7842cbb2207a..1331a8477fe4 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
@@ -7,7 +7,6 @@
 #include <linux/of_mdio.h>
 #include <linux/of_net.h>
 #include <linux/phylink.h>
-#include <linux/pcs-lynx.h>
 
 #include "dpmac.h"
 #include "dpmac-cmd.h"
@@ -23,7 +22,7 @@ struct dpaa2_mac {
 	struct phylink *phylink;
 	phy_interface_t if_mode;
 	enum dpmac_link_type if_link_type;
-	struct lynx_pcs *pcs;
+	struct phylink_pcs *pcs;
 	struct fwnode_handle *fw_node;
 };
 
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index fe6a544f37f0..38b285871249 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -828,7 +828,7 @@ static int enetc_imdio_create(struct enetc_pf *pf)
 {
 	struct device *dev = &pf->si->pdev->dev;
 	struct enetc_mdio_priv *mdio_priv;
-	struct lynx_pcs *pcs_lynx;
+	struct phylink_pcs *phylink_pcs;
 	struct mdio_device *pcs;
 	struct mii_bus *bus;
 	int err;
@@ -860,8 +860,8 @@ static int enetc_imdio_create(struct enetc_pf *pf)
 		goto unregister_mdiobus;
 	}
 
-	pcs_lynx = lynx_pcs_create(pcs);
-	if (!pcs_lynx) {
+	phylink_pcs = lynx_pcs_create(pcs);
+	if (!phylink_pcs) {
 		mdio_device_free(pcs);
 		err = -ENOMEM;
 		dev_err(dev, "cannot create lynx pcs (%d)\n", err);
@@ -869,7 +869,7 @@ static int enetc_imdio_create(struct enetc_pf *pf)
 	}
 
 	pf->imdio = bus;
-	pf->pcs = pcs_lynx;
+	pf->pcs = phylink_pcs;
 
 	return 0;
 
@@ -882,8 +882,11 @@ static int enetc_imdio_create(struct enetc_pf *pf)
 
 static void enetc_imdio_remove(struct enetc_pf *pf)
 {
+	struct mdio_device *mdio_device;
+
 	if (pf->pcs) {
-		mdio_device_free(pf->pcs->mdio);
+		mdio_device = lynx_get_mdio_device(pf->pcs);
+		mdio_device_free(mdio_device);
 		lynx_pcs_destroy(pf->pcs);
 	}
 	if (pf->imdio) {
@@ -941,7 +944,7 @@ static void enetc_pl_mac_config(struct phylink_config *config,
 
 	priv = netdev_priv(pf->si->ndev);
 	if (pf->pcs)
-		phylink_set_pcs(priv->phylink, &pf->pcs->pcs);
+		phylink_set_pcs(priv->phylink, &pf->pcs);
 }
 
 static void enetc_force_rgmii_mac(struct enetc_hw *hw, int speed, int duplex)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
index 263946c51e37..c26bd66e4597 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
@@ -2,7 +2,7 @@
 /* Copyright 2017-2019 NXP */
 
 #include "enetc.h"
-#include <linux/pcs-lynx.h>
+#include <linux/phylink.h>
 
 #define ENETC_PF_NUM_RINGS	8
 
@@ -46,7 +46,7 @@ struct enetc_pf {
 
 	struct mii_bus *mdio; /* saved for cleanup */
 	struct mii_bus *imdio;
-	struct lynx_pcs *pcs;
+	struct phylink_pcs *pcs;
 
 	phy_interface_t if_mode;
 	struct phylink_config phylink_config;
diff --git a/drivers/net/pcs/pcs-lynx.c b/drivers/net/pcs/pcs-lynx.c
index af36cd647bf5..7ff7f86ad430 100644
--- a/drivers/net/pcs/pcs-lynx.c
+++ b/drivers/net/pcs/pcs-lynx.c
@@ -22,6 +22,11 @@
 #define IF_MODE_SPEED_MSK		GENMASK(3, 2)
 #define IF_MODE_HALF_DUPLEX		BIT(4)
 
+struct lynx_pcs {
+	struct phylink_pcs pcs;
+	struct mdio_device *mdio;
+};
+
 enum sgmii_speed {
 	SGMII_SPEED_10		= 0,
 	SGMII_SPEED_100		= 1,
@@ -30,6 +35,15 @@ enum sgmii_speed {
 };
 
 #define phylink_pcs_to_lynx(pl_pcs) container_of((pl_pcs), struct lynx_pcs, pcs)
+#define lynx_to_phylink_pcs(lynx) (&(lynx)->pcs)
+
+struct mdio_device *lynx_get_mdio_device(struct phylink_pcs *pcs)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	return lynx->mdio;
+}
+EXPORT_SYMBOL(lynx_get_mdio_device);
 
 static void lynx_pcs_get_state_usxgmii(struct mdio_device *pcs,
 				       struct phylink_link_state *state)
@@ -329,7 +343,7 @@ static const struct phylink_pcs_ops lynx_pcs_phylink_ops = {
 	.pcs_link_up = lynx_pcs_link_up,
 };
 
-struct lynx_pcs *lynx_pcs_create(struct mdio_device *mdio)
+struct phylink_pcs *lynx_pcs_create(struct mdio_device *mdio)
 {
 	struct lynx_pcs *lynx_pcs;
 
@@ -341,13 +355,15 @@ struct lynx_pcs *lynx_pcs_create(struct mdio_device *mdio)
 	lynx_pcs->pcs.ops = &lynx_pcs_phylink_ops;
 	lynx_pcs->pcs.poll = true;
 
-	return lynx_pcs;
+	return lynx_to_phylink_pcs(lynx_pcs);
 }
 EXPORT_SYMBOL(lynx_pcs_create);
 
-void lynx_pcs_destroy(struct lynx_pcs *pcs)
+void lynx_pcs_destroy(struct phylink_pcs *pcs)
 {
-	kfree(pcs);
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	kfree(lynx);
 }
 EXPORT_SYMBOL(lynx_pcs_destroy);
 
diff --git a/include/linux/pcs-lynx.h b/include/linux/pcs-lynx.h
index a6440d6ebe95..5712cc2ce775 100644
--- a/include/linux/pcs-lynx.h
+++ b/include/linux/pcs-lynx.h
@@ -9,13 +9,10 @@
 #include <linux/mdio.h>
 #include <linux/phylink.h>
 
-struct lynx_pcs {
-	struct phylink_pcs pcs;
-	struct mdio_device *mdio;
-};
+struct mdio_device *lynx_get_mdio_device(struct phylink_pcs *pcs);
 
-struct lynx_pcs *lynx_pcs_create(struct mdio_device *mdio);
+struct phylink_pcs *lynx_pcs_create(struct mdio_device *mdio);
 
-void lynx_pcs_destroy(struct lynx_pcs *pcs);
+void lynx_pcs_destroy(struct phylink_pcs *pcs);
 
 #endif /* __LINUX_PCS_LYNX_H */
-- 
2.25.1

[PATCH v1 net-next 2/5] net: dsa: felix: name change for clarity from pcs to mdio_device

[Colin Foster]

Simple rename of a variable to make things more logical.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
 drivers/net/dsa/ocelot/felix_vsc9959.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index 93ad1d65e212..bf8d38239e7e 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -1089,7 +1089,7 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
 	for (port = 0; port < felix->info->num_ports; port++) {
 		struct ocelot_port *ocelot_port = ocelot->ports[port];
 		struct phylink_pcs *phylink_pcs;
-		struct mdio_device *pcs;
+		struct mdio_device *mdio_device;
 
 		if (dsa_is_unused_port(felix->ds, port))
 			continue;
@@ -1097,13 +1097,13 @@ static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
 		if (ocelot_port->phy_mode == PHY_INTERFACE_MODE_INTERNAL)
 			continue;
 
-		pcs = mdio_device_create(felix->imdio, port);
-		if (IS_ERR(pcs))
+		mdio_device = mdio_device_create(felix->imdio, port);
+		if (IS_ERR(mdio_device))
 			continue;
 
-		phylink_pcs = lynx_pcs_create(pcs);
+		phylink_pcs = lynx_pcs_create(mdio_device);
 		if (!phylink_pcs) {
-			mdio_device_free(pcs);
+			mdio_device_free(mdio_device);
 			continue;
 		}
 
-- 
2.25.1

[PATCH v1 net-next 3/5] net: dsa: seville: name change for clarity from pcs to mdio_device

[Colin Foster]

A simple variable update from "pcs" to "mdio_device" for the mdio device
will make things a little cleaner.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
 drivers/net/dsa/ocelot/seville_vsc9953.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index d34d0f737c16..8c1c9da61602 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -1040,7 +1040,7 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
 	for (port = 0; port < felix->info->num_ports; port++) {
 		struct ocelot_port *ocelot_port = ocelot->ports[port];
 		struct phylink_pcs *phylink_pcs;
-		struct mdio_device *pcs;
+		struct mdio_device *mdio_device;
 		int addr = port + 4;
 
 		if (dsa_is_unused_port(felix->ds, port))
@@ -1049,13 +1049,13 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
 		if (ocelot_port->phy_mode == PHY_INTERFACE_MODE_INTERNAL)
 			continue;
 
-		pcs = mdio_device_create(felix->imdio, addr);
-		if (IS_ERR(pcs))
+		mdio_device = mdio_device_create(felix->imdio, addr);
+		if (IS_ERR(mdio_device))
 			continue;
 
-		phylink_pcs = lynx_pcs_create(pcs);
+		phylink_pcs = lynx_pcs_create(mdio_device);
 		if (!phylink_pcs) {
-			mdio_device_free(pcs);
+			mdio_device_free(mdio_device);
 			continue;
 		}
 
-- 
2.25.1

[PATCH v1 net-next 4/5] net: ethernet: enetc: name change for clarity from pcs to mdio_device

[Colin Foster]

A simple variable update from "pcs" to "mdio_device" for the mdio device
will make things a little cleaner.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
 drivers/net/ethernet/freescale/enetc/enetc_pf.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index 38b285871249..0b6d366a04e7 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -829,7 +829,7 @@ static int enetc_imdio_create(struct enetc_pf *pf)
 	struct device *dev = &pf->si->pdev->dev;
 	struct enetc_mdio_priv *mdio_priv;
 	struct phylink_pcs *phylink_pcs;
-	struct mdio_device *pcs;
+	struct mdio_device *mdio_device;
 	struct mii_bus *bus;
 	int err;
 
@@ -853,16 +853,16 @@ static int enetc_imdio_create(struct enetc_pf *pf)
 		goto free_mdio_bus;
 	}
 
-	pcs = mdio_device_create(bus, 0);
-	if (IS_ERR(pcs)) {
-		err = PTR_ERR(pcs);
-		dev_err(dev, "cannot create pcs (%d)\n", err);
+	mdio_device = mdio_device_create(bus, 0);
+	if (IS_ERR(mdio_device)) {
+		err = PTR_ERR(mdio_device);
+		dev_err(dev, "cannot create mdio device (%d)\n", err);
 		goto unregister_mdiobus;
 	}
 
-	phylink_pcs = lynx_pcs_create(pcs);
+	phylink_pcs = lynx_pcs_create(mdio_device);
 	if (!phylink_pcs) {
-		mdio_device_free(pcs);
+		mdio_device_free(mdio_device);
 		err = -ENOMEM;
 		dev_err(dev, "cannot create lynx pcs (%d)\n", err);
 		goto unregister_mdiobus;
-- 
2.25.1

[PATCH v1 net-next 5/5] net: pcs: lynx: use a common naming scheme for all lynx_pcs variables

[Colin Foster]

pcs-lynx.c used lynx_pcs and lynx as a variable name within the same file.
This standardizes all internal variables to just "lynx"

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
 drivers/net/pcs/pcs-lynx.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/pcs/pcs-lynx.c b/drivers/net/pcs/pcs-lynx.c
index 7ff7f86ad430..fd3445374955 100644
--- a/drivers/net/pcs/pcs-lynx.c
+++ b/drivers/net/pcs/pcs-lynx.c
@@ -345,17 +345,17 @@ static const struct phylink_pcs_ops lynx_pcs_phylink_ops = {
 
 struct phylink_pcs *lynx_pcs_create(struct mdio_device *mdio)
 {
-	struct lynx_pcs *lynx_pcs;
+	struct lynx_pcs *lynx;
 
-	lynx_pcs = kzalloc(sizeof(*lynx_pcs), GFP_KERNEL);
-	if (!lynx_pcs)
+	lynx = kzalloc(sizeof(*lynx), GFP_KERNEL);
+	if (!lynx)
 		return NULL;
 
-	lynx_pcs->mdio = mdio;
-	lynx_pcs->pcs.ops = &lynx_pcs_phylink_ops;
-	lynx_pcs->pcs.poll = true;
+	lynx->mdio = mdio;
+	lynx->pcs.ops = &lynx_pcs_phylink_ops;
+	lynx->pcs.poll = true;
 
-	return lynx_to_phylink_pcs(lynx_pcs);
+	return lynx_to_phylink_pcs(lynx);
 }
 EXPORT_SYMBOL(lynx_pcs_create);
 
-- 
2.25.1