netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Anderson <sean.anderson@seco.com>
To: "David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Madalin Bucur <madalin.bucur@nxp.com>,
	netdev@vger.kernel.org
Cc: Paolo Abeni <pabeni@redhat.com>,
	Eric Dumazet <edumazet@google.com>,
	linux-arm-kernel@lists.infradead.org,
	Russell King <linux@armlinux.org.uk>,
	linux-kernel@vger.kernel.org,
	Sean Anderson <sean.anderson@seco.com>,
	Camelia Groza <camelia.groza@nxp.com>
Subject: [PATCH net-next v3 18/47] net: fman: dtsec: Always gracefully stop/start
Date: Fri, 15 Jul 2022 17:59:25 -0400	[thread overview]
Message-ID: <20220715215954.1449214-19-sean.anderson@seco.com> (raw)
In-Reply-To: <20220715215954.1449214-1-sean.anderson@seco.com>

There are two ways that GRS can be set: graceful_stop and dtsec_isr. It
is cleared by graceful_start. If it is already set before calling
graceful_stop, then that means that dtsec_isr set it. In that case, we
will not set GRS nor will we clear it (which seems like a bug?). For GTS
the logic is similar, except that there is no one else messing with this
bit (so we will always set and clear it). Simplify the logic by always
setting/clearing GRS/GTS. This is less racy that the previous behavior,
and ensures that we always end up clearing the bits. This can of course
clear GRS while dtsec_isr is waiting, but because we have already done
our own waiting it should be fine.

This is the last user of enum comm_mode, so remove it.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Camelia Groza <camelia.groza@nxp.com>
---
Changes since previous series:
- Fix unused variable warning in dtsec_modify_mac_address

(no changes since v1)

 .../net/ethernet/freescale/fman/fman_dtsec.c  | 94 ++++++-------------
 .../net/ethernet/freescale/fman/fman_mac.h    | 10 --
 2 files changed, 30 insertions(+), 74 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fman/fman_dtsec.c b/drivers/net/ethernet/freescale/fman/fman_dtsec.c
index 167843941fa4..7f4f3d797a8d 100644
--- a/drivers/net/ethernet/freescale/fman/fman_dtsec.c
+++ b/drivers/net/ethernet/freescale/fman/fman_dtsec.c
@@ -833,49 +833,41 @@ int dtsec_cfg_pad_and_crc(struct fman_mac *dtsec, bool new_val)
 	return 0;
 }
 
-static void graceful_start(struct fman_mac *dtsec, enum comm_mode mode)
+static void graceful_start(struct fman_mac *dtsec)
 {
 	struct dtsec_regs __iomem *regs = dtsec->regs;
 
-	if (mode & COMM_MODE_TX)
-		iowrite32be(ioread32be(&regs->tctrl) &
-				~TCTRL_GTS, &regs->tctrl);
-	if (mode & COMM_MODE_RX)
-		iowrite32be(ioread32be(&regs->rctrl) &
-				~RCTRL_GRS, &regs->rctrl);
+	iowrite32be(ioread32be(&regs->tctrl) & ~TCTRL_GTS, &regs->tctrl);
+	iowrite32be(ioread32be(&regs->rctrl) & ~RCTRL_GRS, &regs->rctrl);
 }
 
-static void graceful_stop(struct fman_mac *dtsec, enum comm_mode mode)
+static void graceful_stop(struct fman_mac *dtsec)
 {
 	struct dtsec_regs __iomem *regs = dtsec->regs;
 	u32 tmp;
 
 	/* Graceful stop - Assert the graceful Rx stop bit */
-	if (mode & COMM_MODE_RX) {
-		tmp = ioread32be(&regs->rctrl) | RCTRL_GRS;
-		iowrite32be(tmp, &regs->rctrl);
+	tmp = ioread32be(&regs->rctrl) | RCTRL_GRS;
+	iowrite32be(tmp, &regs->rctrl);
 
-		if (dtsec->fm_rev_info.major == 2) {
-			/* Workaround for dTSEC Errata A002 */
-			usleep_range(100, 200);
-		} else {
-			/* Workaround for dTSEC Errata A004839 */
-			usleep_range(10, 50);
-		}
+	if (dtsec->fm_rev_info.major == 2) {
+		/* Workaround for dTSEC Errata A002 */
+		usleep_range(100, 200);
+	} else {
+		/* Workaround for dTSEC Errata A004839 */
+		usleep_range(10, 50);
 	}
 
 	/* Graceful stop - Assert the graceful Tx stop bit */
-	if (mode & COMM_MODE_TX) {
-		if (dtsec->fm_rev_info.major == 2) {
-			/* dTSEC Errata A004: Do not use TCTRL[GTS]=1 */
-			pr_debug("GTS not supported due to DTSEC_A004 Errata.\n");
-		} else {
-			tmp = ioread32be(&regs->tctrl) | TCTRL_GTS;
-			iowrite32be(tmp, &regs->tctrl);
+	if (dtsec->fm_rev_info.major == 2) {
+		/* dTSEC Errata A004: Do not use TCTRL[GTS]=1 */
+		pr_debug("GTS not supported due to DTSEC_A004 Errata.\n");
+	} else {
+		tmp = ioread32be(&regs->tctrl) | TCTRL_GTS;
+		iowrite32be(tmp, &regs->tctrl);
 
-			/* Workaround for dTSEC Errata A0012, A0014 */
-			usleep_range(10, 50);
-		}
+		/* Workaround for dTSEC Errata A0012, A0014 */
+		usleep_range(10, 50);
 	}
 }
 
@@ -893,7 +885,7 @@ int dtsec_enable(struct fman_mac *dtsec)
 	iowrite32be(tmp, &regs->maccfg1);
 
 	/* Graceful start - clear the graceful Rx/Tx stop bit */
-	graceful_start(dtsec, COMM_MODE_RX_AND_TX);
+	graceful_start(dtsec);
 
 	return 0;
 }
@@ -907,7 +899,7 @@ int dtsec_disable(struct fman_mac *dtsec)
 		return -EINVAL;
 
 	/* Graceful stop - Assert the graceful Rx/Tx stop bit */
-	graceful_stop(dtsec, COMM_MODE_RX_AND_TX);
+	graceful_stop(dtsec);
 
 	tmp = ioread32be(&regs->maccfg1);
 	tmp &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
@@ -921,18 +913,12 @@ int dtsec_set_tx_pause_frames(struct fman_mac *dtsec,
 			      u16 pause_time, u16 __maybe_unused thresh_time)
 {
 	struct dtsec_regs __iomem *regs = dtsec->regs;
-	enum comm_mode mode = COMM_MODE_NONE;
 	u32 ptv = 0;
 
 	if (!is_init_done(dtsec->dtsec_drv_param))
 		return -EINVAL;
 
-	if ((ioread32be(&regs->rctrl) & RCTRL_GRS) == 0)
-		mode |= COMM_MODE_RX;
-	if ((ioread32be(&regs->tctrl) & TCTRL_GTS) == 0)
-		mode |= COMM_MODE_TX;
-
-	graceful_stop(dtsec, mode);
+	graceful_stop(dtsec);
 
 	if (pause_time) {
 		/* FM_BAD_TX_TS_IN_B_2_B_ERRATA_DTSEC_A003 Errata workaround */
@@ -954,7 +940,7 @@ int dtsec_set_tx_pause_frames(struct fman_mac *dtsec,
 		iowrite32be(ioread32be(&regs->maccfg1) & ~MACCFG1_TX_FLOW,
 			    &regs->maccfg1);
 
-	graceful_start(dtsec, mode);
+	graceful_start(dtsec);
 
 	return 0;
 }
@@ -962,18 +948,12 @@ int dtsec_set_tx_pause_frames(struct fman_mac *dtsec,
 int dtsec_accept_rx_pause_frames(struct fman_mac *dtsec, bool en)
 {
 	struct dtsec_regs __iomem *regs = dtsec->regs;
-	enum comm_mode mode = COMM_MODE_NONE;
 	u32 tmp;
 
 	if (!is_init_done(dtsec->dtsec_drv_param))
 		return -EINVAL;
 
-	if ((ioread32be(&regs->rctrl) & RCTRL_GRS) == 0)
-		mode |= COMM_MODE_RX;
-	if ((ioread32be(&regs->tctrl) & TCTRL_GTS) == 0)
-		mode |= COMM_MODE_TX;
-
-	graceful_stop(dtsec, mode);
+	graceful_stop(dtsec);
 
 	tmp = ioread32be(&regs->maccfg1);
 	if (en)
@@ -982,25 +962,17 @@ int dtsec_accept_rx_pause_frames(struct fman_mac *dtsec, bool en)
 		tmp &= ~MACCFG1_RX_FLOW;
 	iowrite32be(tmp, &regs->maccfg1);
 
-	graceful_start(dtsec, mode);
+	graceful_start(dtsec);
 
 	return 0;
 }
 
 int dtsec_modify_mac_address(struct fman_mac *dtsec, const enet_addr_t *enet_addr)
 {
-	struct dtsec_regs __iomem *regs = dtsec->regs;
-	enum comm_mode mode = COMM_MODE_NONE;
-
 	if (!is_init_done(dtsec->dtsec_drv_param))
 		return -EINVAL;
 
-	if ((ioread32be(&regs->rctrl) & RCTRL_GRS) == 0)
-		mode |= COMM_MODE_RX;
-	if ((ioread32be(&regs->tctrl) & TCTRL_GTS) == 0)
-		mode |= COMM_MODE_TX;
-
-	graceful_stop(dtsec, mode);
+	graceful_stop(dtsec);
 
 	/* Initialize MAC Station Address registers (1 & 2)
 	 * Station address have to be swapped (big endian to little endian
@@ -1008,7 +980,7 @@ int dtsec_modify_mac_address(struct fman_mac *dtsec, const enet_addr_t *enet_add
 	dtsec->addr = ENET_ADDR_TO_UINT64(*enet_addr);
 	set_mac_address(dtsec->regs, (const u8 *)(*enet_addr));
 
-	graceful_start(dtsec, mode);
+	graceful_start(dtsec);
 
 	return 0;
 }
@@ -1226,18 +1198,12 @@ int dtsec_set_promiscuous(struct fman_mac *dtsec, bool new_val)
 int dtsec_adjust_link(struct fman_mac *dtsec, u16 speed)
 {
 	struct dtsec_regs __iomem *regs = dtsec->regs;
-	enum comm_mode mode = COMM_MODE_NONE;
 	u32 tmp;
 
 	if (!is_init_done(dtsec->dtsec_drv_param))
 		return -EINVAL;
 
-	if ((ioread32be(&regs->rctrl) & RCTRL_GRS) == 0)
-		mode |= COMM_MODE_RX;
-	if ((ioread32be(&regs->tctrl) & TCTRL_GTS) == 0)
-		mode |= COMM_MODE_TX;
-
-	graceful_stop(dtsec, mode);
+	graceful_stop(dtsec);
 
 	tmp = ioread32be(&regs->maccfg2);
 
@@ -1258,7 +1224,7 @@ int dtsec_adjust_link(struct fman_mac *dtsec, u16 speed)
 		tmp &= ~DTSEC_ECNTRL_R100M;
 	iowrite32be(tmp, &regs->ecntrl);
 
-	graceful_start(dtsec, mode);
+	graceful_start(dtsec);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/freescale/fman/fman_mac.h b/drivers/net/ethernet/freescale/fman/fman_mac.h
index 19f327efdaff..418d1de85702 100644
--- a/drivers/net/ethernet/freescale/fman/fman_mac.h
+++ b/drivers/net/ethernet/freescale/fman/fman_mac.h
@@ -75,16 +75,6 @@ typedef u8 enet_addr_t[ETH_ALEN];
 #define ETH_HASH_ENTRY_OBJ(ptr)	\
 	hlist_entry_safe(ptr, struct eth_hash_entry, node)
 
-/* Enumeration (bit flags) of communication modes (Transmit,
- * receive or both).
- */
-enum comm_mode {
-	COMM_MODE_NONE = 0,	/* No transmit/receive communication */
-	COMM_MODE_RX = 1,	/* Only receive communication */
-	COMM_MODE_TX = 2,	/* Only transmit communication */
-	COMM_MODE_RX_AND_TX = 3	/* Both transmit and receive communication */
-};
-
 /* FM MAC Exceptions */
 enum fman_mac_exceptions {
 	FM_MAC_EX_10G_MDIO_SCAN_EVENT = 0
-- 
2.35.1.1320.gc452695387.dirty


  parent reply	other threads:[~2022-07-15 22:03 UTC|newest]

Thread overview: 123+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-15 21:59 [PATCH net-next v3 00/47] [RFT] net: dpaa: Convert to phylink Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 01/47] dt-bindings: phy: Add Lynx 10G phy binding Sean Anderson
2022-07-20 22:17   ` Rob Herring
2022-07-21 16:05     ` Sean Anderson
2022-07-21 18:29       ` Rob Herring
2022-07-21 23:35         ` Sean Anderson
2022-07-26 15:44           ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 02/47] dt-bindings: net: Expand pcs-handle to an array Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 03/47] dt-bindings: net: Convert FMan MAC bindings to yaml Sean Anderson
2022-07-15 23:06   ` Rob Herring
2022-07-16 22:47     ` Sean Anderson
2022-07-21 14:42       ` Krzysztof Kozlowski
2022-07-22 16:50         ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 04/47] dt-bindings: net: fman: Add additional interface properties Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 05/47] net: phy: Add 1000BASE-KX interface mode Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 06/47] [RFT] phy: fsl: Add Lynx 10G SerDes driver Sean Anderson
2022-07-16 22:39   ` kernel test robot
2022-07-15 21:59 ` [PATCH net-next v3 07/47] net: phy: Add support for rate adaptation Sean Anderson
2022-07-16 19:39   ` Andrew Lunn
2022-07-16 21:55     ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 08/47] net: phylink: Support differing link speeds and interface speeds Sean Anderson
2022-07-16 20:06   ` Andrew Lunn
2022-07-16 22:29     ` Sean Anderson
2022-07-17  1:26       ` Andrew Lunn
2022-07-18 15:49         ` Sean Anderson
2022-07-18 16:06     ` Russell King (Oracle)
2022-07-18 16:38       ` Sean Anderson
2022-07-18 17:28         ` Andrew Lunn
2022-07-18 17:40           ` Sean Anderson
2022-07-18 18:01           ` Russell King (Oracle)
2022-07-15 21:59 ` [PATCH net-next v3 09/47] net: phylink: Adjust advertisement based on rate adaptation Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 10/47] net: phylink: Adjust link settings " Sean Anderson
2022-07-16 20:17   ` Andrew Lunn
2022-07-16 22:37     ` Sean Anderson
2022-07-17  1:39       ` Andrew Lunn
2022-07-18 16:22         ` Russell King (Oracle)
2022-07-18 16:29         ` Sean Anderson
2022-07-18 16:14       ` Russell King (Oracle)
2022-07-18 16:12   ` Russell King (Oracle)
2022-07-18 16:45     ` Sean Anderson
2022-07-18 17:58       ` Russell King (Oracle)
2022-07-15 21:59 ` [PATCH net-next v3 11/47] [RFC] net: phylink: Add support for CRS-based " Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 12/47] net: phy: aquantia: Add support for AQR115 Sean Anderson
2022-07-16 18:17   ` Andrew Lunn
2022-07-16 22:42     ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 13/47] net: phy: aquantia: Add some additional phy interfaces Sean Anderson
2022-07-16 18:18   ` Andrew Lunn
2022-07-15 21:59 ` [PATCH net-next v3 14/47] net: phy: aquantia: Add support for rate adaptation Sean Anderson
2022-07-16 18:38   ` Andrew Lunn
2022-07-16 22:45     ` Sean Anderson
2022-07-17  1:42       ` Andrew Lunn
2022-07-15 21:59 ` [PATCH net-next v3 15/47] net: fman: Convert to SPDX identifiers Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 16/47] net: fman: Don't pass comm_mode to enable/disable Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 17/47] net: fman: Store en/disable in mac_device instead of mac_priv_s Sean Anderson
2022-07-15 21:59 ` Sean Anderson [this message]
2022-07-15 21:59 ` [PATCH net-next v3 19/47] net: fman: Get PCS node in per-mac init Sean Anderson
2022-07-21 12:39   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 20/47] net: fman: Store initialization function in match data Sean Anderson
2022-07-21 12:51   ` Camelia Alexandra Groza
2022-07-21 15:34     ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 21/47] net: fman: Move struct dev to mac_device Sean Anderson
2022-07-21 12:52   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 22/47] net: fman: Configure fixed link in memac_initialization Sean Anderson
2022-07-21 12:57   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 23/47] net: fman: Export/rename some common functions Sean Anderson
2022-07-21 12:58   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 24/47] net: fman: memac: Use params instead of priv for max_speed Sean Anderson
2022-07-21 12:58   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 25/47] net: fman: Move initialization to mac-specific files Sean Anderson
2022-07-21 12:59   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 26/47] net: fman: Mark mac methods static Sean Anderson
2022-07-21 12:59   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 27/47] net: fman: Inline several functions into initialization Sean Anderson
2022-07-21 13:01   ` Camelia Alexandra Groza
2022-07-21 15:33     ` Sean Anderson
2022-07-22 12:30       ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 28/47] net: fman: Remove internal_phy_node from params Sean Anderson
2022-07-21 13:03   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 29/47] net: fman: Map the base address once Sean Anderson
2022-07-21 13:04   ` Camelia Alexandra Groza
2022-07-21 15:34     ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 30/47] net: fman: Pass params directly to mac init Sean Anderson
2022-07-21 13:05   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 31/47] net: fman: Use mac_dev for some params Sean Anderson
2022-07-21 13:05   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 32/47] net: fman: Specify type of mac_dev for exception_cb Sean Anderson
2022-07-21 13:06   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 33/47] net: fman: Clean up error handling Sean Anderson
2022-07-21 13:06   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 34/47] net: fman: Change return type of disable to void Sean Anderson
2022-07-21 13:08   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 35/47] net: dpaa: Use mac_dev variable in dpaa_netdev_init Sean Anderson
2022-07-21 13:15   ` Camelia Alexandra Groza
2022-07-21 15:36     ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 36/47] soc: fsl: qbman: Add helper for sanity checking cgr ops Sean Anderson
2022-07-21 13:16   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 37/47] soc: fsl: qbman: Add CGR update function Sean Anderson
2022-07-21 13:18   ` Camelia Alexandra Groza
2022-07-21 15:36     ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 38/47] net: dpaa: Adjust queue depth on rate change Sean Anderson
2022-07-21 13:18   ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 39/47] net: fman: memac: Add serdes support Sean Anderson
2022-07-21 13:30   ` Camelia Alexandra Groza
2022-07-21 15:38     ` Sean Anderson
2022-07-22 12:43       ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 40/47] net: fman: memac: Use lynx pcs driver Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 41/47] [RFT] net: dpaa: Convert to phylink Sean Anderson
2022-07-16 21:27   ` kernel test robot
2022-07-15 21:59 ` [PATCH net-next v3 42/47] powerpc: dts: qoriq: Add nodes for QSGMII PCSs Sean Anderson
2022-07-21 13:48   ` Camelia Alexandra Groza
2022-07-21 17:51     ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 43/47] arm64: dts: layerscape: " Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 44/47] arm64: dts: ls1046a: Add serdes bindings Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 45/47] arm64: dts: ls1088a: " Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 46/47] arm64: dts: ls1046ardb: " Sean Anderson
2022-07-21 14:20   ` Camelia Alexandra Groza
2022-07-21 15:40     ` Sean Anderson
2022-07-22 12:41       ` Camelia Alexandra Groza
2022-07-25 20:02         ` Sean Anderson
2022-07-26 11:35           ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 47/47] [WIP] arm64: dts: ls1088ardb: " Sean Anderson
2022-07-21 14:26 ` [PATCH net-next v3 00/47] [RFT] net: dpaa: Convert to phylink Camelia Alexandra Groza
2022-07-21 15:39   ` Sean Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220715215954.1449214-19-sean.anderson@seco.com \
    --to=sean.anderson@seco.com \
    --cc=camelia.groza@nxp.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=madalin.bucur@nxp.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).