From: Sean Anderson <sean.anderson@seco.com>
To: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Madalin Bucur <madalin.bucur@nxp.com>,
netdev@vger.kernel.org
Cc: Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>,
linux-arm-kernel@lists.infradead.org,
Russell King <linux@armlinux.org.uk>,
linux-kernel@vger.kernel.org,
Sean Anderson <sean.anderson@seco.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Li Yang <leoyang.li@nxp.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Paul Mackerras <paulus@samba.org>,
Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH net-next v3 42/47] powerpc: dts: qoriq: Add nodes for QSGMII PCSs
Date: Fri, 15 Jul 2022 17:59:49 -0400 [thread overview]
Message-ID: <20220715215954.1449214-43-sean.anderson@seco.com> (raw)
In-Reply-To: <20220715215954.1449214-1-sean.anderson@seco.com>
Now that we actually read registers from QSGMII PCSs, it's important
that we have the correct address (instead of hoping that we're the MAC
with all the QSGMII PCSs on its bus). This adds nodes for the QSGMII
PCSs. They have the same addresses on all SoCs (e.g. if QSGMIIA is
present it's used for MACs 1 through 4).
Since the first QSGMII PCSs share an address with the SGMII and XFI
PCSs, we only add new nodes for PCSs 2-4. This avoids address conflicts
on the bus.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---
Changes in v3:
- Add compatibles for QSGMII PCSs
- Split arm and powerpcs dts updates
Changes in v2:
- New
.../boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi | 3 ++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi | 10 +++++++++-
.../boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi | 10 +++++++++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi | 10 +++++++++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi | 3 ++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi | 10 +++++++++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi | 10 +++++++++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi | 10 +++++++++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi | 3 ++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi | 10 +++++++++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi | 10 +++++++++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi | 10 +++++++++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi | 3 ++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi | 10 +++++++++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi | 10 +++++++++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi | 10 +++++++++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi | 3 ++-
arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi | 10 +++++++++-
18 files changed, 127 insertions(+), 18 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
index baa0c503e741..db169d630db3 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
@@ -55,7 +55,8 @@ ethernet@e0000 {
reg = <0xe0000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
ptp-timer = <&ptp_timer0>;
- pcsphy-handle = <&pcsphy0>;
+ pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
+ pcs-names = "sgmii", "qsgmii";
};
mdio@e1000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
index 93095600e808..e80ad8675be8 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -52,7 +52,15 @@ ethernet@f0000 {
compatible = "fsl,fman-memac";
reg = <0xf0000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
- pcsphy-handle = <&pcsphy6>;
+ pcsphy-handle = <&pcsphy6>, <&qsgmiib_pcs2>, <&pcsphy6>;
+ pcs-names = "sgmii", "qsgmii", "xfi";
+ };
+
+ mdio@e9000 {
+ qsgmiib_pcs2: ethernet-pcs@2 {
+ compatible = "fsl,lynx-pcs";
+ reg = <2>;
+ };
};
mdio@f1000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
index ff4bd38f0645..6a6f51842ad5 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
@@ -55,7 +55,15 @@ ethernet@e2000 {
reg = <0xe2000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
ptp-timer = <&ptp_timer0>;
- pcsphy-handle = <&pcsphy1>;
+ pcsphy-handle = <&pcsphy1>, <&qsgmiia_pcs1>;
+ pcs-names = "sgmii", "qsgmii";
+ };
+
+ mdio@e1000 {
+ qsgmiia_pcs1: ethernet-pcs@1 {
+ compatible = "fsl,lynx-pcs";
+ reg = <1>;
+ };
};
mdio@e3000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
index 1fa38ed6f59e..543da5493e40 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -52,7 +52,15 @@ ethernet@f2000 {
compatible = "fsl,fman-memac";
reg = <0xf2000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
- pcsphy-handle = <&pcsphy7>;
+ pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs3>, <&pcsphy7>;
+ pcs-names = "sgmii", "qsgmii", "xfi";
+ };
+
+ mdio@e9000 {
+ qsgmiib_pcs3: ethernet-pcs@3 {
+ compatible = "fsl,lynx-pcs";
+ reg = <3>;
+ };
};
mdio@f3000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
index a8cc9780c0c4..ce76725e6eb2 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
@@ -51,7 +51,8 @@ ethernet@e0000 {
reg = <0xe0000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
ptp-timer = <&ptp_timer0>;
- pcsphy-handle = <&pcsphy0>;
+ pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
+ pcs-names = "sgmii", "qsgmii";
};
mdio@e1000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
index 8b8bd70c9382..f3af67df4767 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
@@ -51,7 +51,15 @@ ethernet@e2000 {
reg = <0xe2000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
ptp-timer = <&ptp_timer0>;
- pcsphy-handle = <&pcsphy1>;
+ pcsphy-handle = <&pcsphy1>, <&qsgmiia_pcs1>;
+ pcs-names = "sgmii", "qsgmii";
+ };
+
+ mdio@e1000 {
+ qsgmiia_pcs1: ethernet-pcs@1 {
+ compatible = "fsl,lynx-pcs";
+ reg = <1>;
+ };
};
mdio@e3000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
index 619c880b54d8..f6d74de84bfe 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
@@ -51,7 +51,15 @@ ethernet@e4000 {
reg = <0xe4000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
ptp-timer = <&ptp_timer0>;
- pcsphy-handle = <&pcsphy2>;
+ pcsphy-handle = <&pcsphy2>, <&qsgmiia_pcs2>;
+ pcs-names = "sgmii", "qsgmii";
+ };
+
+ mdio@e1000 {
+ qsgmiia_pcs2: ethernet-pcs@2 {
+ compatible = "fsl,lynx-pcs";
+ reg = <2>;
+ };
};
mdio@e5000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
index d7ebb73a400d..6e091d8ae9e2 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
@@ -51,7 +51,15 @@ ethernet@e6000 {
reg = <0xe6000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
ptp-timer = <&ptp_timer0>;
- pcsphy-handle = <&pcsphy3>;
+ pcsphy-handle = <&pcsphy3>, <&qsgmiia_pcs3>;
+ pcs-names = "sgmii", "qsgmii";
+ };
+
+ mdio@e1000 {
+ qsgmiia_pcs3: ethernet-pcs@3 {
+ compatible = "fsl,lynx-pcs";
+ reg = <3>;
+ };
};
mdio@e7000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
index b151d696a069..e2174c0fc841 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
@@ -51,7 +51,8 @@ ethernet@e8000 {
reg = <0xe8000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
ptp-timer = <&ptp_timer0>;
- pcsphy-handle = <&pcsphy4>;
+ pcsphy-handle = <&pcsphy4>, <&pcsphy4>;
+ pcs-names = "sgmii", "qsgmii";
};
mdio@e9000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
index adc0ae0013a3..9106815bd63e 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
@@ -51,7 +51,15 @@ ethernet@ea000 {
reg = <0xea000 0x1000>;
fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
ptp-timer = <&ptp_timer0>;
- pcsphy-handle = <&pcsphy5>;
+ pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs1>;
+ pcs-names = "sgmii", "qsgmii";
+ };
+
+ mdio@e9000 {
+ qsgmiib_pcs1: ethernet-pcs@1 {
+ compatible = "fsl,lynx-pcs";
+ reg = <1>;
+ };
};
mdio@eb000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
index 435047e0e250..a3c1538dfda1 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
@@ -52,7 +52,15 @@ ethernet@f0000 {
compatible = "fsl,fman-memac";
reg = <0xf0000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
- pcsphy-handle = <&pcsphy14>;
+ pcsphy-handle = <&pcsphy14>, <&qsgmiid_pcs2>, <&pcsphy14>;
+ pcs-names = "sgmii", "qsgmii", "xfi";
+ };
+
+ mdio@e9000 {
+ qsgmiid_pcs2: ethernet-pcs@2 {
+ compatible = "fsl,lynx-pcs";
+ reg = <2>;
+ };
};
mdio@f1000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
index c098657cca0a..c024517e70d6 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
@@ -52,7 +52,15 @@ ethernet@f2000 {
compatible = "fsl,fman-memac";
reg = <0xf2000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>;
- pcsphy-handle = <&pcsphy15>;
+ pcsphy-handle = <&pcsphy15>, <&qsgmiid_pcs3>, <&pcsphy15>;
+ pcs-names = "sgmii", "qsgmii", "xfi";
+ };
+
+ mdio@e9000 {
+ qsgmiid_pcs3: ethernet-pcs@3 {
+ compatible = "fsl,lynx-pcs";
+ reg = <3>;
+ };
};
mdio@f3000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
index 9d06824815f3..16fb299f615a 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
@@ -51,7 +51,8 @@ ethernet@e0000 {
reg = <0xe0000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
ptp-timer = <&ptp_timer1>;
- pcsphy-handle = <&pcsphy8>;
+ pcsphy-handle = <&pcsphy8>, <&pcsphy8>;
+ pcs-names = "sgmii", "qsgmii";
};
mdio@e1000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
index 70e947730c4b..75cecbef8469 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
@@ -51,7 +51,15 @@ ethernet@e2000 {
reg = <0xe2000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
ptp-timer = <&ptp_timer1>;
- pcsphy-handle = <&pcsphy9>;
+ pcsphy-handle = <&pcsphy9>, <&qsgmiic_pcs1>;
+ pcs-names = "sgmii", "qsgmii";
+ };
+
+ mdio@e1000 {
+ qsgmiic_pcs1: ethernet-pcs@1 {
+ compatible = "fsl,lynx-pcs";
+ reg = <1>;
+ };
};
mdio@e3000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
index ad96e6529595..98c1d27f17e7 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
@@ -51,7 +51,15 @@ ethernet@e4000 {
reg = <0xe4000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
ptp-timer = <&ptp_timer1>;
- pcsphy-handle = <&pcsphy10>;
+ pcsphy-handle = <&pcsphy10>, <&qsgmiic_pcs2>;
+ pcs-names = "sgmii", "qsgmii";
+ };
+
+ mdio@e1000 {
+ qsgmiic_pcs2: ethernet-pcs@2 {
+ compatible = "fsl,lynx-pcs";
+ reg = <2>;
+ };
};
mdio@e5000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
index 034bc4b71f7a..203a00036f17 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
@@ -51,7 +51,15 @@ ethernet@e6000 {
reg = <0xe6000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
ptp-timer = <&ptp_timer1>;
- pcsphy-handle = <&pcsphy11>;
+ pcsphy-handle = <&pcsphy11>, <&qsgmiic_pcs3>;
+ pcs-names = "sgmii", "qsgmii";
+ };
+
+ mdio@e1000 {
+ qsgmiic_pcs3: ethernet-pcs@3 {
+ compatible = "fsl,lynx-pcs";
+ reg = <3>;
+ };
};
mdio@e7000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
index 93ca23d82b39..9366935ebc02 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
@@ -51,7 +51,8 @@ ethernet@e8000 {
reg = <0xe8000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
ptp-timer = <&ptp_timer1>;
- pcsphy-handle = <&pcsphy12>;
+ pcsphy-handle = <&pcsphy12>, <&pcsphy12>;
+ pcs-names = "sgmii", "qsgmii";
};
mdio@e9000 {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
index 23b3117a2fd2..39f7c6133017 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
@@ -51,7 +51,15 @@ ethernet@ea000 {
reg = <0xea000 0x1000>;
fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>;
ptp-timer = <&ptp_timer1>;
- pcsphy-handle = <&pcsphy13>;
+ pcsphy-handle = <&pcsphy13>, <&qsgmiid_pcs1>;
+ pcs-names = "sgmii", "qsgmii";
+ };
+
+ mdio@e9000 {
+ qsgmiid_pcs1: ethernet-pcs@1 {
+ compatible = "fsl,lynx-pcs";
+ reg = <1>;
+ };
};
mdio@eb000 {
--
2.35.1.1320.gc452695387.dirty
next prev parent reply other threads:[~2022-07-15 22:07 UTC|newest]
Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-15 21:59 [PATCH net-next v3 00/47] [RFT] net: dpaa: Convert to phylink Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 01/47] dt-bindings: phy: Add Lynx 10G phy binding Sean Anderson
2022-07-20 22:17 ` Rob Herring
2022-07-21 16:05 ` Sean Anderson
2022-07-21 18:29 ` Rob Herring
2022-07-21 23:35 ` Sean Anderson
2022-07-26 15:44 ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 02/47] dt-bindings: net: Expand pcs-handle to an array Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 03/47] dt-bindings: net: Convert FMan MAC bindings to yaml Sean Anderson
2022-07-15 23:06 ` Rob Herring
2022-07-16 22:47 ` Sean Anderson
2022-07-21 14:42 ` Krzysztof Kozlowski
2022-07-22 16:50 ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 04/47] dt-bindings: net: fman: Add additional interface properties Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 05/47] net: phy: Add 1000BASE-KX interface mode Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 06/47] [RFT] phy: fsl: Add Lynx 10G SerDes driver Sean Anderson
2022-07-16 22:39 ` kernel test robot
2022-07-15 21:59 ` [PATCH net-next v3 07/47] net: phy: Add support for rate adaptation Sean Anderson
2022-07-16 19:39 ` Andrew Lunn
2022-07-16 21:55 ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 08/47] net: phylink: Support differing link speeds and interface speeds Sean Anderson
2022-07-16 20:06 ` Andrew Lunn
2022-07-16 22:29 ` Sean Anderson
2022-07-17 1:26 ` Andrew Lunn
2022-07-18 15:49 ` Sean Anderson
2022-07-18 16:06 ` Russell King (Oracle)
2022-07-18 16:38 ` Sean Anderson
2022-07-18 17:28 ` Andrew Lunn
2022-07-18 17:40 ` Sean Anderson
2022-07-18 18:01 ` Russell King (Oracle)
2022-07-15 21:59 ` [PATCH net-next v3 09/47] net: phylink: Adjust advertisement based on rate adaptation Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 10/47] net: phylink: Adjust link settings " Sean Anderson
2022-07-16 20:17 ` Andrew Lunn
2022-07-16 22:37 ` Sean Anderson
2022-07-17 1:39 ` Andrew Lunn
2022-07-18 16:22 ` Russell King (Oracle)
2022-07-18 16:29 ` Sean Anderson
2022-07-18 16:14 ` Russell King (Oracle)
2022-07-18 16:12 ` Russell King (Oracle)
2022-07-18 16:45 ` Sean Anderson
2022-07-18 17:58 ` Russell King (Oracle)
2022-07-15 21:59 ` [PATCH net-next v3 11/47] [RFC] net: phylink: Add support for CRS-based " Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 12/47] net: phy: aquantia: Add support for AQR115 Sean Anderson
2022-07-16 18:17 ` Andrew Lunn
2022-07-16 22:42 ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 13/47] net: phy: aquantia: Add some additional phy interfaces Sean Anderson
2022-07-16 18:18 ` Andrew Lunn
2022-07-15 21:59 ` [PATCH net-next v3 14/47] net: phy: aquantia: Add support for rate adaptation Sean Anderson
2022-07-16 18:38 ` Andrew Lunn
2022-07-16 22:45 ` Sean Anderson
2022-07-17 1:42 ` Andrew Lunn
2022-07-15 21:59 ` [PATCH net-next v3 15/47] net: fman: Convert to SPDX identifiers Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 16/47] net: fman: Don't pass comm_mode to enable/disable Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 17/47] net: fman: Store en/disable in mac_device instead of mac_priv_s Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 18/47] net: fman: dtsec: Always gracefully stop/start Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 19/47] net: fman: Get PCS node in per-mac init Sean Anderson
2022-07-21 12:39 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 20/47] net: fman: Store initialization function in match data Sean Anderson
2022-07-21 12:51 ` Camelia Alexandra Groza
2022-07-21 15:34 ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 21/47] net: fman: Move struct dev to mac_device Sean Anderson
2022-07-21 12:52 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 22/47] net: fman: Configure fixed link in memac_initialization Sean Anderson
2022-07-21 12:57 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 23/47] net: fman: Export/rename some common functions Sean Anderson
2022-07-21 12:58 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 24/47] net: fman: memac: Use params instead of priv for max_speed Sean Anderson
2022-07-21 12:58 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 25/47] net: fman: Move initialization to mac-specific files Sean Anderson
2022-07-21 12:59 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 26/47] net: fman: Mark mac methods static Sean Anderson
2022-07-21 12:59 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 27/47] net: fman: Inline several functions into initialization Sean Anderson
2022-07-21 13:01 ` Camelia Alexandra Groza
2022-07-21 15:33 ` Sean Anderson
2022-07-22 12:30 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 28/47] net: fman: Remove internal_phy_node from params Sean Anderson
2022-07-21 13:03 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 29/47] net: fman: Map the base address once Sean Anderson
2022-07-21 13:04 ` Camelia Alexandra Groza
2022-07-21 15:34 ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 30/47] net: fman: Pass params directly to mac init Sean Anderson
2022-07-21 13:05 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 31/47] net: fman: Use mac_dev for some params Sean Anderson
2022-07-21 13:05 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 32/47] net: fman: Specify type of mac_dev for exception_cb Sean Anderson
2022-07-21 13:06 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 33/47] net: fman: Clean up error handling Sean Anderson
2022-07-21 13:06 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 34/47] net: fman: Change return type of disable to void Sean Anderson
2022-07-21 13:08 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 35/47] net: dpaa: Use mac_dev variable in dpaa_netdev_init Sean Anderson
2022-07-21 13:15 ` Camelia Alexandra Groza
2022-07-21 15:36 ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 36/47] soc: fsl: qbman: Add helper for sanity checking cgr ops Sean Anderson
2022-07-21 13:16 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 37/47] soc: fsl: qbman: Add CGR update function Sean Anderson
2022-07-21 13:18 ` Camelia Alexandra Groza
2022-07-21 15:36 ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 38/47] net: dpaa: Adjust queue depth on rate change Sean Anderson
2022-07-21 13:18 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 39/47] net: fman: memac: Add serdes support Sean Anderson
2022-07-21 13:30 ` Camelia Alexandra Groza
2022-07-21 15:38 ` Sean Anderson
2022-07-22 12:43 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 40/47] net: fman: memac: Use lynx pcs driver Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 41/47] [RFT] net: dpaa: Convert to phylink Sean Anderson
2022-07-16 21:27 ` kernel test robot
2022-07-15 21:59 ` Sean Anderson [this message]
2022-07-21 13:48 ` [PATCH net-next v3 42/47] powerpc: dts: qoriq: Add nodes for QSGMII PCSs Camelia Alexandra Groza
2022-07-21 17:51 ` Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 43/47] arm64: dts: layerscape: " Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 44/47] arm64: dts: ls1046a: Add serdes bindings Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 45/47] arm64: dts: ls1088a: " Sean Anderson
2022-07-15 21:59 ` [PATCH net-next v3 46/47] arm64: dts: ls1046ardb: " Sean Anderson
2022-07-21 14:20 ` Camelia Alexandra Groza
2022-07-21 15:40 ` Sean Anderson
2022-07-22 12:41 ` Camelia Alexandra Groza
2022-07-25 20:02 ` Sean Anderson
2022-07-26 11:35 ` Camelia Alexandra Groza
2022-07-15 21:59 ` [PATCH net-next v3 47/47] [WIP] arm64: dts: ls1088ardb: " Sean Anderson
2022-07-21 14:26 ` [PATCH net-next v3 00/47] [RFT] net: dpaa: Convert to phylink Camelia Alexandra Groza
2022-07-21 15:39 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220715215954.1449214-43-sean.anderson@seco.com \
--to=sean.anderson@seco.com \
--cc=benh@kernel.crashing.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madalin.bucur@nxp.com \
--cc=mpe@ellerman.id.au \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=paulus@samba.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).